§ 711.15 Reporting information to EPA.

Any person who must report under this part, as described in § 711.8, must submit the information described in this section for each chemical substance described in § 711.5 that the person manufactured (including imported) for commercial purposes in an amount of 25,000 lb (11,340 kg) or more (or in an amount of 2,500 lb (1,134 kg) or more for chemical substances subject to the rules, orders, or actions described in § 711.8(b)) at any one site during any calendar year since the last principal reporting year (e.g., for the 2020 submission period, consider calendar years 2016, 2017, 2018, and 2019, because 2015 was the last principal reporting year). The principal reporting year for each submission period is the previous calendar year (e.g., the principal reporting year for the 2020 submission period is calendar year 2019). For all submission periods, a separate report must be submitted for each chemical substance at each site for which the submitter is required to report. A submitter of information under this part must report information as described in this section to the extent that such information is known to or reasonably ascertainable by that person.

(a) Reporting information to EPA. Any person who reports information to EPA must complete a Form U using the e-CDRweb reporting tool provided by EPA at the address set forth in § 711.35. The submission must include all information described in paragraph (b) of this section. Persons must submit the chemical reports on a separate single Form U for each site for which the person is required to report. The e-CDRweb reporting tool is described in the instructions available from EPA at the website set forth in § 711.35.

(b) Information to be reported. The information described in paragraphs (b)(1) through (4) of this section must be reported for each chemical substance manufactured (including imported) in an amount of 25,000 lb (11,340 kg) or more (or in an amount of 2,500 lb (1,134 kg) or more for chemical substances subject to the rules, orders, or actions described in § 711.8(b)) at any one site during any calendar year since the last principal reporting year. The requirement to report information described in paragraph (b)(4) of this section is subject to exemption as described in § 711.6.

(1) A certification statement signed and dated by an authorized official of the submitter company. The authorized official must certify that the submitted information has been completed in compliance with the requirements of this part and that the confidentiality claims made on the Form U are true and correct. The certification must be signed and dated by the authorized official for the submitter company, and provide that person's name, official title, and email address.

(2) Company and site information. The following currently correct parent company and site information at the date of CDR submission must be reported for each site at which a reportable chemical substance is manufactured (including imported) above the applicable production volume threshold, as described in this section (see § 711.3 for the “site” for importers and special situations).

(i) The legal name, address, and Dun and Bradstreet D-U-N-S® (D&B) number for the highest-level parent company located in the United States and, if one exists, for the highest-level foreign-based parent company. A submitter under this part must obtain a D&B number for the parent company if none exists and must report using the standardized conventions for the naming of a parent company as provided in the CDR Instructions for Reporting identified in § 711.35.

(ii) The name of a person who will serve as technical contact for the submitter company who will be able to answer questions about the information submitted by the company to EPA, and that technical contact person's full mailing address, telephone number, and email address.

(iii) The legal name and full street address of each site. A submitter under this part must include the appropriate D&B number for each site reported, and the county or parish (or other jurisdictional indicator) in which the site is located. A submitter under this part must obtain a D&B number for the site reported if none exists. For a co-manufacturing situation in which the contracting company initiates the report, the contracting company must report both the site controlling the contract and the producing company's site information.

(iv) The six-digit NAICS code for the site. A submitter under this part must include the appropriate six-digit NAICS code for each site reported.

(3) Chemical-specific information. The following chemical-specific information must be reported for each reportable chemical substance manufactured (including imported) above the applicable production volume threshold, as described in paragraph (b) of this section:

(i) The specific, currently correct CA Index name as used to list the chemical substance on the TSCA Inventory and the correct corresponding CASRN for each reportable chemical substance at each site. Submitters who wish to report chemical substances listed on the confidential portion of the TSCA Inventory will need to report the chemical substance using the corresponding TSCA Accession Number that is listed on the public portion of the Inventory. In addition to reporting the chemical identifying number itself, submitters must specify the type of number they are reporting by selecting from among the codes in Table 1 to paragraph (b)(3)(i).

Table 1 to Paragraph (b)(3)(i)—Codes To Specify Type of Chemical Identifying Number

Code

Number type

A

TSCA Accession Number.

C

Chemical Abstracts Service Registry Number (CASRN).

(A) If an importer submitting a report cannot provide the information specified in this paragraph (b)(3)(i) because it is unknown to the importer and claimed as confidential by the supplier of the chemical substance or mixture, the importer must use e-CDRweb to ask the supplier to provide the correct chemical identity and, in the case of a mixture, the percentage of formulation and chemical function information directly to EPA in a joint submission. Such request must include instructions for submitting chemical identity information electronically, using e-CDRweb and CDX (see § 711.35), and for clearly referencing the importer's submission. Contact information for the supplier, a trade name or other designation for the chemical substance or mixture, and a copy of the request to the supplier must be included with the importer's submission.

(B) If a manufacturer submitting a report cannot provide the information specified in this paragraph (b)(3)(i) because the reportable chemical substance is manufactured using a reactant having a specific chemical identity that is unknown to the manufacturer and claimed as confidential by its supplier, the manufacturer must use e-CDRweb to ask the supplier of the confidential reactant to provide the correct chemical identity of the confidential reactant directly to EPA in a joint submission. Such request must include instructions for submitting chemical identity information electronically using e-CDRweb and CDX (see § 711.35), and for clearly referencing the manufacturer's submission. Contact information for the supplier, a trade name or other designation for the chemical substance, and a copy of the request to the supplier must be included with the importer's submission.

(C) EPA will accept only joint submissions that are submitted electronically using e-CDRweb and CDX (see § 711.35) and that clearly reference the primary submission to which they refer.

(ii) For the principal reporting year only, a statement indicating, for each reportable chemical substance at each site, whether the chemical substance is manufactured in the United States, imported into the United States, or both manufactured in the United States and imported into the United States.

(iii) For the principal reporting year only, the total annual volume (in pounds) of each reportable chemical substance domestically manufactured or imported at each site. The total annual domestically manufactured volume (not including imported volume) and the total annual imported volume must be separately reported. These amounts must be reported to two significant figures of accuracy. In addition, the total annual volume (domestically manufactured plus imported volumes in pounds) of each reportable chemical substance at each site for each complete calendar year since the last principal reporting year.

(iv) For the principal reporting year only, the volume used on site and the volume directly exported of each reportable chemical substance domestically manufactured or imported at each site. These amounts must be reported to two significant figures of accuracy.

(v) For the principal reporting year only, a designation indicating, for each imported reportable chemical substance at each site, whether the imported chemical substance is physically present at the reporting site.

(vi) For the principal reporting year only, a designation indicating, for each reportable chemical substance at each site, whether the chemical substance is being recycled or otherwise used for a commercial purpose instead of being disposed of as a waste or included in a waste stream.

(vii) For the principal reporting year only, the total number of workers reasonably likely to be exposed to each reportable chemical substance at each site. For each reportable chemical substance at each site, the submitter must select from among the ranges of workers listed in Table 2 to paragraph (b)(3)(vii) and report the corresponding code (i.e., W1 through W8):

Table 2 to Paragraph (b)(3)(vii)—Codes for Reporting Number of Workers Reasonably Likely To Be Exposed

Code

Range

W1

Fewer than 10 workers.

W2

At least 10 but fewer than 25 workers.

W3

At least 25 but fewer than 50 workers.

W4

At least 50 but fewer than 100 workers.

W5

At least 100 but fewer than 500 workers.

W6

At least 500 but fewer than 1,000 workers.

W7

At least 1,000 but fewer than 10,000 workers.

W8

At least 10,000 workers.

(viii) For the principal reporting year only, the maximum concentration, measured by percentage of weight, of each reportable chemical substance at the time it is sent off-site from each site. If the chemical substance is site-limited, you must report the maximum concentration, measured by percentage of weight of the reportable chemical substance at the time it is reacted on-site to produce a different chemical substance. This information must be reported regardless of the physical form(s) in which the chemical substance is sent off-site/reacted on-site. For each chemical substance at each site, select the maximum concentration of the chemical substance from among the ranges listed in Table 3 to paragraph (b)(3)(viii) and report the corresponding code (i.e., M1 through M5):

Table 3 to Paragraph (b)(3)(viii)—Codes for Reporting Maximum Concentration of Chemical Substance

Code

Concentration range(percent weight)

M1

Less than 1 percent by weight.

M2

At least 1 but less than 30 percent by weight.

M3

At least 30 but less than 60 percent by weight.

M4

At least 60 but less than 90 percent by weight.

M5

At least 90 percent by weight.

(ix) For the principal reporting year only, the physical form(s) of the reportable chemical substance as it is sent off-site from each site. If the chemical substance is site-limited, you must report the physical form(s) of the reportable chemical substance at the time it is reacted on-site to produce a different chemical substance. For each chemical substance at each site, the submitter must report as many physical forms as applicable from among the physical forms listed in this Unit:

(A) Dry powder.

(B) Pellets or large crystals.

(C) Water- or solvent-wet solid.

(D) Other solid.

(E) Gas or vapor.

(F) Liquid.

(x) For the principal reporting year only, submitters must report the percentage, rounded off to the closest 10 percent, of total production volume of the reportable chemical substance, reported in response to paragraph (b)(3)(iii) of this section, that is associated with each physical form reported under paragraph (b)(3)(ix) of this section.

(4) Chemical-specific information related to processing and use. The following chemical-specific information must be reported for each reportable chemical substance manufactured (including imported) above the applicable production volume threshold, as described in this section. Persons subject to paragraph (b)(4) of this section must report the information described in paragraphs (b)(4)(i) and (ii) of this section for each reportable chemical substance at sites under their control and at sites that receive a reportable chemical substance from the submitter directly or indirectly (including through a broker/distributor, from a customer of the submitter, etc.). Information reported in response to this paragraph must be reported for the principal reporting year only and only to the extent that it is known to or reasonably ascertainable by the submitter. Information required to be reported under this paragraph is limited to domestic (i.e., within the customs territory of the United States) processing and use activities. If information responsive to a given data requirement under this paragraph, including information in the form of an estimate, is not known or reasonably ascertainable, the submitter is not required to respond to the requirement.

(i) Industrial processing and use information. (A) A designation indicating the type of industrial processing or use operation(s) at each site that receives a reportable chemical substance from the submitter site directly or indirectly (whether the recipient site(s) are controlled by the submitter site or not). For each chemical substance, report the letters which correspond to the appropriate processing or use operation(s) listed in Table 4 to paragraph (b)(4)(i)(A). A particular designation may need to be reported more than once, to the extent that a submitter reports more than one sector (under paragraph (b)(4)(i)(B) of this section) that applies to a given designation under this paragraph.

Table 4 to Paragraph (b)(4)(i)(A)—Codes for Reporting Type of Industrial Processing or Use Operation

Designation

Operation

PC

Processing as a reactant.

PF

Processing—incorporation into formulation, mixture, or reaction product.

PA

Processing—incorporation into article.

PK

Processing—repackaging.

U

Use—non-incorporative activities.

(B) A code indicating the sector(s) that best describe the industrial activities associated with each industrial processing or use operation reported under paragraph (b)(4)(i)(A) of this section. For each chemical substance, report the code that corresponds to the appropriate sector(s) listed in Table 5 to paragraph (b)(4)(i)(B). A particular sector code may need to be reported more than once, to the extent that a submitter reports more than one function code (under paragraph (b)(4)(i)(C) of this section) that applies to a given sector code under this paragraph.

Table 5 to Paragraph (b)(4)(i)(B)—Codes for Reporting Industrial Sectors

Code

Sector description

IS1

Agriculture, forestry, fishing, and hunting.

IS2

Oil and gas drilling, extraction, and support activities.

IS3

Mining (except oil and gas) and support activities.

IS4

Utilities.

IS5

Construction.

IS6

Food, beverage, and tobacco product manufacturing.

IS7

Textiles, apparel, and leather manufacturing.

IS8

Wood product manufacturing.

IS9

Paper manufacturing.

IS10

Printing and related support activities.

IS11

Petroleum refineries.

IS12

Asphalt paving, roofing, and coating materials manufacturing.

IS13

Petroleum lubricating oil and grease manufacturing.

IS14

All other petroleum and coal products manufacturing.

IS15

Petrochemical manufacturing.

IS16

Industrial gas manufacturing.

IS17

Synthetic dye and pigment manufacturing.

IS18

Carbon black manufacturing.

IS19

All other basic inorganic chemical manufacturing.

IS20

Cyclic crude and intermediate manufacturing.

IS21

All other basic organic chemical manufacturing.

IS22

Plastics material and resin manufacturing.

IS23

Synthetic rubber manufacturing.

IS24

Organic fiber manufacturing.

IS25

Pesticide, fertilizer, and other agricultural chemical manufacturing.

IS26

Pharmaceutical and medicine manufacturing.

IS27

Paint and coating manufacturing.

IS28

Adhesive manufacturing.

IS29

Soap, cleaning compound, and toilet preparation manufacturing.

IS30

Printing ink manufacturing.

IS31

Explosives manufacturing.

IS32

Custom compounding of purchased resins.

IS33

Photographic film, paper, plate, and chemical manufacturing.

IS34

All other chemical product and preparation manufacturing.

IS35

Plastics product manufacturing.

IS36

Rubber product manufacturing.

IS37

Non-metallic mineral product manufacturing (includes cement, clay, concrete, glass, gypsum, lime, and other non-metallic mineral product manufacturing).

IS38

Primary metal manufacturing.

IS39

Fabricated metal product manufacturing.

IS40

Machinery manufacturing.

IS41

Computer and electronic product manufacturing.

IS42

Electrical equipment, appliance, and component manufacturing.

IS43

Transportation equipment manufacturing.

IS44

Furniture and related product manufacturing.

IS45

Miscellaneous manufacturing.

IS46

Wholesale and retail trade.

IS47

Services.

IS48

Other (requires additional information).

(C) For each sector reported under paragraph (b)(4)(i)(B) of this section, the applicable code(s) from Table 6 to paragraph (b)(4)(i)(C) must be selected to designate the function category(ies) that best represents the specific manner in which the chemical substance is used. For the 2020 submission period:

(1) Use column A in Table 6 to paragraph (b)(4)(i)(C) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C)); and

(2) Use either column A or B in Table 6 to paragraph (b)(4)(i)(C) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 6 to paragraph (b)(4)(i)(C). A particular function category may need to be reported more than once, to the extent that a submitter reports more than one industrial processing or use operation/sector combination (under paragraphs (b)(4)(i)(A) and (B) of this section) that applies to a given function category under this paragraph. If more than 10 unique combinations of industrial processing or use operations/sector/function categories apply to a chemical substance, submitters need only report the 10 unique combinations for the chemical substance that cumulatively represent the largest percentage of the submitter's production volume for that chemical substance, measured by weight. If none of the listed function categories accurately describes a use of a chemical substance, the category “Other” may be used, and must include a description of the use.

Table 6 to Paragraph (b)(4)(i)(C)—Codes for Reporting Function Categories

Column A

Column B

Code

Category

Code

Category

F001

Abrasives

U001

Abrasives.

F002

Etching agent

F003

Adhesion/cohesion promoter

U002

Adhesives and sealant chemicals.

F004

Binder

F005

Flux agent

F006

Sealant (barrier)

F007

Absorbent

U003

Adsorbents and absorbents.

F008

Adsorbent

F009

Dehydrating agent (desiccant)

F010

Drier

F011

Humectant

F012

Soil amendments (fertilizers)

U004

Agricultural chemicals (non-pesticidal).

F013

Anti-adhesive/cohesive

U005

Anti-adhesive agents.

F014

Dusting agent

F015

Bleaching agent

U006

Bleaching agents.

F016

Brightener

F017

Anti-scaling agent

U007

Corrosion inhibitors and anti-scaling agents.

F018

Corrosion inhibitor

F019

Dye

U008

Dyes.

F020

Fixing agent (mordant)

F021

Hardener

U009

Fillers.

F022

Filler

F023

Anti-static agent

U010

Finishing agents.

F024

Softener and conditioner

F025

Swelling agent

F026

Tanning agents not otherwise specified

F027

Waterproofing agent

F028

Wrinkle resisting agent

F029

Flame retardant

U011

Flame retardants.

F030

Fuel agents

U012

Fuels and fuel additives.

F031

Fuel

F032

Heat transferring agent

U013

Functional fluids (closed systems).

F033

Hydraulic fluids

F034

Insulators

F035

Refrigerants

F036

Anti-freeze agent

U014

Functional fluids (open systems).

F037

Intermediate

U015

Intermediates.

F038

Monomers

F039

Ion exchange agent

U016

Ion exchange agents.

F040

Anti-slip agent

U017

Lubricants and lubricant additives.

F041

Lubricating agent

F042

Deodorizer

U018

Odor agents.

F043

Fragrance

F044

Oxidizing agent

U019

Oxidizing/reducing agents.

F045

Reducing agent

F046

Photosensitive agent

U020

Photosensitive chemicals.

F047

Photosensitizers

F048

Semiconductor and photovoltaic agent

F049

UV stabilizer

F050

Opacifer

U021

Pigments.

F051

Pigment

F052

Plasticizer

U022

Plasticizers.

F053

Plating agent

U023

Plating agents and surface treating agents.

F054

Catalyst

U024

Process regulators.

F055

Chain transfer agent

F056

Chemical reaction regulator

F057

Crystal growth modifiers (nucleating agents)

F058

Polymerization promoter

F059

Terminator/Blocker

F060

Processing aids, specific to petroleum production

U025

Processing aids, specific to petroleum production.

F061

Antioxidant

U026

Processing aids, not otherwise listed.

F062

Chelating agent

F063

Defoamer

F064

pH regulating agent

F065

Processing aids not otherwise specified

F066

Energy Releasers (explosives, motive propellant)

U027

Propellants and blowing agents.

F067

Foamant

F068

Propellants, non-motive (blowing agents)

F069

Cloud-point depressant

U028

Solids separation agents.

F070

Flocculating agent

F071

Flotation agent

F072

Solids separation (precipitating) agent, not otherwise specified

F073

Cleaning agent

U029

Solvents (for cleaning or degreasing).

F074

Diluent

U030

Solvents (which become part of product formulation or mixture).

F075

Solvent

F076

Surfactant (surface active agent)

U031

Surface active agents.

F077

Emulsifier

F078

Thickening agent

U032

Viscosity adjustors.

F079

Viscosity modifiers

F080

Laboratory chemicals

U033

Laboratory chemicals.

F081

Dispersing agent

U034

Paint additives and coating additives not described by other categories.

F082

Freeze-thaw additive

F083

Surface modifier

F084

Wetting agent (non-aqueous)

F085

Aerating and deaerating agents

U999

Other (specify).

F086

Explosion inhibitor

F087

Fire extinguishing agent

F088

Flavoring and nutrient

F089

Anti-redeposition agent

F090

Anti-stain agent

F091

Anti-streaking agent

F092

Conductive agent

F093

Incandescent agent

F094

Magnetic element

F095

Anti-condensation agent

F096

Coalescing agent

F097

Film former

F098

Demulsifier

F099

Stabilizing agent

F100

Alloys

F101

Density modifier

F102

Elasticizer

F103

Flow promoter

F104

Sizing agent

F105

Solubility enhancer

F106

Vapor pressure modifiers

F107

Embalming agent

F108

Heat stabilizer

F109

Preservative

F110

Anti-caking agent

F111

Deflocculant

F112

Dust suppressant

F113

Impregnation agent

F114

Leaching agent

F115

Tracer

F116

X-ray absorber

F999

Other

For the 2020 submission period: (1) Use column A for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph(b)(4)(i)(C) and (2) use either column A or B for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C).

For the 2024 and future submission periods, use only column A.

Table 7 to Paragraph (b)(4)(i)(C)—CASRNs of Chemical Substances Designated as High Priority for Risk Evaluation Under TSCA Section 6(b) on December 30, 2019

CASRN

Chemical substance

106-46-7

p-Dichlorobenzene.

107-06-2

1,2-Dichloroethane.

156-60-5

trans-1,2-Dichloroethylene.

95-50-1

o-Dichlorobenzene.

79-00-5

1,1,2-Trichloroethane.

78-87-5

1,2-Dichloropropane.

75-34-3

1,1-Dichloroethane.

84-74-2

Dibutyl phthalate (DBP) (1,2-Benzene-dicarboxylic acid, 1,2-dibutyl ester).

85-68-7

Butyl benzyl phthalate (BBP)—1,2-Benzene-dicarboxylic acid, 1-butyl 2(phenylmethyl) ester.

117-81-7

Di-ethylhexyl phthalate (DEHP)—(1,2-Benzene-dicarboxylic acid, 1,2-bis(2-ethylhexyl) ester).

84-69-5

Di-isobutyl phthalate (DIBP)—(1,2-Benzene-dicarboxylic acid, 1,2-bis-(2methylpropyl) ester).

84-61-7

Dicyclohexyl phthalate.

79-94-7

4,4′-(1-Methylethylidene)bis[2,6-dibromophenol] (TBBPA).

115-96-8

Tris(2-chloroethyl) phosphate (TCEP).

115-86-6

Phosphoric acid, triphenyl ester (TPP).

106-93-4

Ethylene dibromide.

106-99-0

1,3-Butadiene.

1222-05-5

1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylcyclopental[g]-2-benzopyran (HHCB).

50-00-0

Formaldehyde.

85-44-9

Phthalic anhydride.

(D) The estimated percentage, rounded off to the closest 10 percent, of total production volume of the reportable chemical substance associated with each combination of industrial processing or use operation, sector, and function category. Where a particular combination of industrial processing or use operation, sector, and function category accounts for less than 5 percent of the submitter's site's total production volume of a reportable chemical substance, the percentage must not be rounded off to 0 percent if the production volume attributable to that industrial processing or use operation, sector, and function category combination is 25,000 lb (11,340 kg) or more during the reporting year. Instead, in such a case, submitters must report the percentage, rounded off to the closest 1 percent, of the submitter's site's total production volume of the reportable chemical substance associated with the particular combination of industrial processing or use operation, sector, and function category.

(E) For each combination of industrial processing or use operation, sector, and function category, the submitter must estimate the number of sites at which each reportable chemical substance is processed or used. For each combination associated with each chemical substance, the submitter must select from among the ranges of sites listed in Table 8 to paragraph (b)(4)(i)(E) and report the corresponding code (i.e., S1 through S7):

Table 8 to Paragraph (b)(4)(i)(E)—Codes for Reporting Numbers of Sites

Code

Range

S1

Fewer than 10 sites.

S2

At least 10 but fewer than 25 sites.

S3

At least 25 but fewer than 100 sites.

S4

At least 100 but fewer than 250 sites.

S5

At least 250 but fewer than 1,000 sites.

S6

At least 1,000 but fewer than 10,000 sites.

S7

At least 10,000 sites.

(F) For each combination of industrial processing or use operation, sector, and function category, the submitter must estimate the number of workers reasonably likely to be exposed to each reportable chemical substance. For each combination associated with each chemical substance, the submitter must select from among the worker ranges listed in paragraph (b)(3)(vii) of this section and report the corresponding code (i.e., W1 though W8).

(ii) Consumer and commercial use information. (A) Using the applicable codes listed in Table 9 to paragraph (b)(4)(ii)(A), submitters must designate the consumer and commercial product category(ies) that best describe the consumer and commercial products in which each reportable chemical substance is used (whether the recipient site(s) are controlled by the submitter site or not). For the 2020 submission period:

(1) Use column A in Table 9 to paragraph (b)(4)(ii)(A) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C); and

(2) Use either column A or B in Table 9 to paragraph (b)(4)(ii)(A) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 9 to paragraph (b)(4)(ii)(A). If more than 10 codes apply to a chemical substance, submitters need only report the 10 codes for the chemical substance that cumulatively represent the largest percentage of the submitter's production volume for that chemical, measured by weight. If none of the listed consumer and commercial product categories accurately describes the consumer and commercial products in which each reportable chemical substance is used, the category “Other” may be used, and must include a description of the use.

Table 9 to Paragraph (b)(4)(ii)(A)—Codes for Reporting Consumer and Commercial Product Categories

Column A

Column B

Code

Category

Code

Category

Chemical Substances in Furnishing, Cleaning, Treatment Care Products

CC101

Construction and building materials covering large surface areas including stone, plaster, cement, glass and ceramic articles; fabrics, textiles, and apparel

C101

Floor coverings.

CC102

Furniture & furnishings including plastic articles (soft); leather articles

C102

Foam seating and bedding products.

CC103

Furniture & furnishings including stone, plaster, cement, glass and ceramic articles; metal articles; or rubber articles

C103

Furniture and furnishings not covered elsewhere.

CC104

Leather conditioner

C104

Fabric, textile, and leather products not covered elsewhere.

CC105

Leather tanning, dye, finishing, impregnation and care products

CC106

Textile (fabric) dyes

CC107

Textile finishing and impregnating/surface treatment products

CC108

All-purpose foam spray cleaner

C105

Cleaning and furnishing care products.

CC109

All-purpose liquid cleaner/polish

CC110

All-purpose liquid spray cleaner

CC111

All-purpose waxes and polishes

CC112

Appliance cleaners

CC113

Drain and toilet cleaners (liquid)

CC114

Powder cleaners (floors)

CC115

Powder cleaners (porcelain)

CC116

Dishwashing detergent (liquid/gel)

C106

Laundry and dishwashing products.

CC117

Dishwashing detergent (unit dose/granule)

CC118

Dishwashing detergent liquid (hand-wash)

CC119

Dry cleaning and associated products

CC120

Fabric enhancers

CC121

Laundry detergent (unit-dose/granule)

CC122

Laundry detergent (liquid)

CC123

Stain removers

CC124

Ion exchangers

C107

Water treatment products.

CC125

Liquid water treatment products

CC126

Solid/Powder water treatment products

CC127

Liquid body soap

C108

Personal care products.

CC128

Liquid hand soap

CC129

Solid bar soap

CC130

Air fresheners for motor vehicles

C109

Air care products.

CC131

Continuous action air fresheners

CC132

Instant action air fresheners

CC133

Anti-static spray

C110

Apparel and footwear care products.

CC134

Apparel finishing, and impregnating/surface treatment products

CC135

Insect repellent treatment

CC136

Pre-market waxes, stains, and polishes applied to footwear

CC137

Post-market waxes, and polishes applied to footwear (shoe polish)

CC138

Waterproofing and water-resistant sprays

Chemical Substances in Construction, Paint, Electrical, and Metal Products

CC201

Fillers and putties

C201

Adhesives and sealants.

CC202

Hot-melt adhesives

CC203

One-component caulks

CC204

Solder

CC205

Single-component glues and adhesives

CC206

Two-component caulks

CC207

Two-component glues and adhesives

CC208

Adhesive/Caulk removers

C202

Paints and coatings.

CC209

Aerosol spray paints

CC210

Lacquers, stains, varnishes and floor finishes

CC211

Paint strippers/removers

CC212

Powder coatings

CC213

Radiation curable coatings

CC214

Solvent-based paint

CC215

Thinners

CC216

Water-based paint

CC217

Construction and building materials covering large surface areas, including wood articles

C203

Building/construction materials—wood and engineered wood products.

CC218

Construction and building materials covering large surface areas, including paper articles; metal articles; stone, plaster, cement, glass and ceramic articles

C204

Building/construction materials not covered elsewhere.

CC219

Machinery, mechanical appliances, electrical/electronic articles

C205

Electrical and electronic products.

CC220

Other machinery, mechanical appliances, electronic/electronic articles

CC221

Construction and building materials covering large surface areas, including metal articles

C206

Metal products not covered elsewhere.

CC222

Electrical batteries and accumulators

C207

Batteries.

Chemical Substances in Packaging, Paper, Plastic, Toys, Hobby Products

CC990

Non-TSCA use

C301

Food packaging.

CC301

Packaging (excluding food packaging), including paper articles

C302

Paper products.

CC302

Other articles with routine direct contact during normal use, including paper articles

CC303

Packaging (excluding food packaging), including rubber articles; plastic articles (hard); plastic articles (soft)

C303

Plastic and rubber products not covered elsewhere.

CC304

Other articles with routine direct contact during normal use including rubber articles; plastic articles (hard)

CC305

Toys intended for children's use (and child dedicated articles), including fabrics, textiles, and apparel; or plastic articles (hard)

C304

Toys, playground, and sporting equipment.

CC306

Adhesives applied at elevated temperatures

C305

Arts, crafts, and hobby materials.

CC307

Cement/concrete

CC308

Crafting glue

CC309

Crafting paint (applied to body)

CC310

Crafting paint (applied to craft)

CC311

Fixatives and finishing spray coatings

CC312

Modelling clay

CC313

Correction fluid/tape

C306

Ink, toner, and colorant products.

CC314

Inks in writing equipment (liquid)

CC315

Inks used for stamps

CC316

Toner/Printer cartridge

CC317

Liquid photographic processing solutions

C307

Photographic supplies, film, and photochemicals.

Chemical Substances in Automotive, Fuel, Agriculture, Outdoor Use Products

CC401

Exterior car washes and soaps

C401

Automotive care products.

CC402

Exterior car waxes, polishes, and coatings

CC403

Interior car care

CC404

Touch up auto paint

CC405

Degreasers

C402

Lubricants and greases.

CC406

Liquid lubricants and greases

CC407

Paste lubricants and greases

CC408

Spray lubricants and greases

CC409

Anti-freeze liquids

C403

Anti-freeze and de-icing products.

CC410

De-icing liquids

CC411

De-icing solids

CC412

Lock de-icers/releasers

CC413

Cooking and heating fuels

C404

Fuels and related products.

CC414

Fuel additives

CC415

Vehicular or appliance fuels

CC416

Explosive materials

C405

Explosive materials.

CC417

Agricultural non-pesticidal products

C406

Agricultural products (non-pesticidal).

CC418

Lawn and garden care products

C407

Lawn and garden care products.

Chemical Substances in Products not Described by Other Codes

CC980

Other (specify)

C909

Other (specify).

CC990

Non-TSCA use

C980

Non-TSCA use.

For the 2020 submission period: (1) Use column A for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C) and (2) use either column A or B for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C).

For the 2024 and future submission periods, use only column A.

(B) For each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, the applicable code(s) described in paragraph (b)(4)(i)(C) of this section must be selected to designate the function category(ies) that best represents the specific manner in which the chemical substance is used. For the 2020 submission period:

(1) Use column A in Table 6 to paragraph (b)(4)(i)(C) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C); and

(2) Use either column A or B in Table 6 to paragraph (b)(4)(i)(C) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 6 to paragraph (b)(4)(i)(C). A particular function category may need to be reported more than once, to the extent that a submitter reports more than one consumer or commercial product category (under paragraph (b)(4)(ii)(A) of this section) that applies to a given function category under this paragraph. If none of the listed function categories accurately describes a use of a chemical substance, the category “Other” may be used, and must include a description of the use.

(C) An indication, within each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, whether the use is a consumer or a commercial use.

(D) Submitters must determine, within each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, whether any amount of each reportable chemical substance manufactured (including imported) by the submitter is present in (for example, a plasticizer chemical substance used to make pacifiers) or on (for example, as a component in the paint on a toy) any consumer products intended for use by children age 14 or younger, regardless of the concentration of the chemical substance remaining in or on the product. Submitters must select from the following options: The chemical substance is used in or on any consumer products intended for use by children; the chemical substance is not used in or on any consumer products intended for use by children; or information as to whether the chemical substance is used in or on any consumer products intended for use by children is not known to or reasonably ascertainable by the submitter.

(E) The estimated percentage, rounded off to the closest 10 percent, of the submitter's site's total production volume of the reportable chemical substance associated with each consumer and commercial product category. Where a particular consumer and commercial product category accounts for less than 5 percent of the total production volume of a reportable chemical substance, the percentage must not be rounded off to 0 percent if the production volume attributable to that commercial and consumer product category is 25,000 lb (11,340 kg) or more during the reporting year. Instead, in such a case, submitters must report the percentage, rounded off to the closest 1 percent, of the submitter's site's total production volume of the reportable chemical substance associated with the particular consumer and commercial product category.

(F) Where the reportable chemical substance is used in consumer or commercial products, the estimated typical maximum concentration, measured by weight, of the chemical substance in each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section. For each chemical substance in each commercial and consumer product category reported under paragraph (b)(4)(ii)(A) of this section, submitters must select from among the ranges of concentrations listed in Table 3 to paragraph (b)(3)(viii) of this section and report the corresponding code (i.e., M1 through M5).

(G) Where the reportable chemical substance is used in a commercial product, the submitter must estimate the number of commercial workers reasonably likely to be exposed to each reportable chemical substance. For each combination associated with each substance, the submitter must select from among the worker ranges listed in Table 2 to paragraph (b)(3)(vii) of this section and report the corresponding code (i.e., W1 though W8).

[85 FR 20139, Apr. 9, 2020]