Section 003. Incorporation By Reference

The following documents are incorporated by reference into these rules: (3-18-22) 01. American Petroleum Institute (API) Bulletin E3, Wellbore Plugging and Abandonment Practices. 2nd Edition, updated April 2018. Available at the office of the Idaho Department of Lands at 300 Nort h 6th Street, Suite 103. (7-1-25) 02. API SPEC 5CT, Specifications for Casing and Tubing. The 11th edition, updated December, 1 , 2023. Available at the office of the Idaho Department of Lands at 300 North 6th Street, Suite 103. (7-1-25) 03. API SPEC 10a, Specification for Cements and Materials for Well Cementing. The 25th Editio n dated February, 2019, updated through Addendum 2, August 2022. Available at the office of the Idaho Department o f Lands at 300 North 6th Street, Suite 103. (7-1-25) 04. American Society for Testing and Materials (ASTM) D69812(2021), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)). June 25, 2012 revision. Available at the office of the Idaho Department of Lands at 300 North 6th Street, Suite 103. (7-1-25) 05. ASTM 1250-19e1, Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, an d Lubricating Oils: API MPMS Chapter 11.1 May 15, 2020 revision. Available at the office of the Idah o Department of Lands at 300 North 6th Street, Suite 103. (7-1-25) 06. ASTM D155712(2021), Standard Test Methods for Laboratory Compaction Characteristic s of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). July 5, 2021 revision. Available at the office of the Idaho Department of Lands at 300 North 6th Street, Suite 103. (7-1-25) 07. Environmental Protection Agency (EPA) SW-846 Method 9090A, Compatibility Test fo r Wastes and Membrane Liners. Revision 1, July 1992

2021), Standard Test Methods for Laboratory Compaction Characteristic s of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). July 5, 2021 revision. Available at the office of the Idaho Department of Lands at 300 North 6th Street, Suite 103. (7-1-25) 07. Environmental Protection Agency (EPA) SW-846 Method 9090A, Compatibility Test fo r Wastes and Membrane Liners. Revision 1, July 1992. Available at the office of the Idaho Department of Lands a t 300 North 6th Street, Suite 103 and this website: https://www.epa.gov/hw-sw846/sw-846-test-method-9090a- compatibility-test-wastes-and-membrane-liners. (7-1-25) 08. Occupational Safety and Health Administration (OSHA) Standard 1910.1200 (Hazar d Communication). Last revised 2013. Available at the office of the Idaho Department of Lands at 300 North 6t h Street, Suite 103 and this website: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.1200. (7-1-25) 004. -- 009. (RESERVED)