Airworthiness Directives; Saab Model SAAB SF340A and SAAB 340B Series Airplanes

FederalRegulations

Ask Donna

How this section applies to your facts.

Federal Register › Vol. 61 › 61 FR 511

This text was captured on Sep 30, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

Rules and Regulations

Federal Register

________________________________________________________________________

The Code of Federal Regulations is sold by the Superintendent of Documents.

Prices of new books are listed in the first FEDERAL REGISTER issue of each

week.

========================================================================

and Regulations

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 95-NM-260-AD; Amendment 39-9480; AD 96-01-04]

Airworthiness Directives; Saab Model SAAB SF340A and SAAB 340B

Series Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: This amendment adopts a new airworthiness directive (AD) that

is applicable to certain Saab Model SAAB SF340A and SAAB 340B series

airplanes. This action requires revising the Airplane Flight Manual

(AFM) to require verification that the auto-ignition system is

operational; to define icing conditions at higher ambient temperatures;

and to provide the flight crew with limitations and procedures to aid

in the avoidance of engine power interruptions. This amendment is

prompted by a report of complete power loss of the left engine and

power fluctuations on the right engine as a result of build up of ice

and/or slush in the engine inlet and subsequent ingestion into the

engines; the auto-ignition system of the left engine had failed, which

prevented automatic restart of the engine following power interruption.

The actions specified in this AD are intended to prevent failure of the

auto-ignition system to re-light the engine in the event of power

interruptions due to the ingestion of ice and/or slush into the engine,

which could result in engine flameout and subsequent shutdown, and to

provide the flight crew with guidance to aid in avoidance of such

occurrences.

DATES: Effective January 23, 1996.

Comments for inclusion in the Rules Docket must be received on or

before March 8, 1996.

ADDRESSES: Submit comments in triplicate to the Federal Aviation

Administration (FAA), Transport Airplane Directorate, ANM-103,

Attention: Rules Docket No. 95-NM-260-AD, 1601 Lind Avenue, SW.,

Renton, Washington 98055-4056.

The information concerning this amendment may be obtained from or

examined at the FAA, Transport Airplane Directorate, 1601 Lind Avenue,

SW., Renton, Washington.

FOR FURTHER INFORMATION CONTACT: Ruth E. Harder, Aerospace Engineer,

Standardization Branch, ANM-113, FAA, Transport Airplane Directorate,

1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (206)

227-1721; fax (206) 227-1149.

SUPPLEMENTARY INFORMATION: The FAA has received a report indicating

that an unsafe condition may exist on certain Saab Model SAAB SF340A

and SAAB 340B series airplanes. Recently, an incident occurred on a

Model SAAB 340B series airplane during which, shortly after exiting

icing conditions, the left engine of the airplane shut down abruptly

and the right engine experienced multiple power interruptions.

Subsequent investigation revealed that shutdown of the left engine

occurred due to ingestion of ice and/or slush into the engine from the

inlet. In addition, the auto-ignition system had failed on that engine;

therefore, engine re-light did not occur. Failure of the auto-ignition

system, which is a component of the engine Digital Electronic

Controller (DEC), was the result of a broken fuse. This fuse failure

also caused the engine turbine (or Np) overspeed protection system to

be inoperative.

The interruptions of power to the right engine also were caused by

ingestion of ice and/or slush into the engine; however, the auto-

ignition system for the right engine was operational and engine re-

light occurred. In addition, failure of the auto-ignition system can

exist concurrently such that engine re-light does not occur. These

conditions, if not corrected, could result in engine flameout and

subsequent shutdown.

Although single event power interruptions have occurred previously

on this airplane type, recent occurrences of multiple power

interruptions demonstrate a need to increase the safety margin for

flight in icing conditions. Activation of the engine anti-icing system

at higher ambient temperatures will reduce the ice/slush build-up

within the engine inlet and will improve the engine surge margin.

In light of the information discussed previously, the FAA finds

that certain limitations and procedures should be included in the FAA-

approved Airplane Flight Manual (AFM) to:

--provide the flight crew with procedures to verify that the auto-

ignition system is operational;

--expand the current definition of icing conditions by increasing the

temperature at which those conditions exist from +5 degrees Celsius to

+10 degrees Celsius; and

--alert the flight crew to certain icing conditions during which power

to an engine may be interrupted, and provide the flight crew with

guidance to aid in avoidance of such occurrences.

The FAA has determined that such limitations and procedures

currently are not defined adequately in the AFM for these airplanes.

This airplane model is manufactured in Sweden and is type

certificated for operation in the United States under the provisions of

section 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and

the applicable bilateral airworthiness agreement. Pursuant to this

bilateral airworthiness agreement, the Luftfartsverket (LFV), which is

the airworthiness authority for Sweden, has kept the FAA informed of

the situation described above. The FAA has examined the findings of the

LFV, reviewed all available information, and determined that AD action

is necessary for products of this type design that are certificated for

operation in the United States.

Since an unsafe condition has been identified that is likely to

exist or develop on other airplanes of the same type design registered

in the United States, this AD is being issued to prevent failure of the

auto-ignition system to re-light the engine in the event of power

interruptions due to the ingestion of ice and/or slush into the engine,

which could result in engine flameout and subsequent shutdown; and

to provide the flight crew with guidance to aid in avoidance of such

occurrences.

This AD requires the following:

--revising the Limitations Section of the AFM to require verification

that the auto-ignition system is operational;

--revising the Limitations Section of the AFM to define icing

conditions at higher ambient temperatures;

--revising the Normal Procedures Section of the AFM to alert the flight

crew to certain icing conditions during which power to an engine may be

interrupted, and to provide the flight crew with limitations and

procedures to aid in avoidance of interruptions of power to an engine.

For Model SAAB 340B series airplanes having an auto-ignition system

that is found to be inoperative, this AD requires a test of the Np

overspeed system to ensure that it is operative, and repair, if

necessary.

This is considered to be interim action until final action is

identified, at which time the FAA may consider further rulemaking.

Since a situation exists that requires the immediate adoption of

this regulation, it is found that notice and opportunity for prior

public comment hereon are impracticable, and that good cause exists for

making this amendment effective in less than 30 days.

Comments Invited

Although this action is in the form of a final rule that involves

requirements affecting flight safety and, thus, was not preceded by

notice and an opportunity for public comment, comments are invited on

this rule. Interested persons are invited to comment on this rule by

submitting such written data, views, or arguments as they may desire.

Communications shall identify the Rules Docket number and be submitted

in triplicate to the address specified under the caption ADDRESSES. All

communications received on or before the closing date for comments will

be considered, and this rule may be amended in light of the comments

received. Factual information that supports the commenter's ideas and

suggestions is extremely helpful in evaluating the effectiveness of the

AD action and determining whether additional rulemaking action would be

needed.

Comments are specifically invited on the overall regulatory,

economic, environmental, and energy aspects of the rule that might

suggest a need to modify the rule. All comments submitted will be

available, both before and after the closing date for comments, in the

Rules Docket for examination by interested persons. A report that

summarizes each FAA-public contact concerned with the substance of this

AD will be filed in the Rules Docket.

Commenters wishing the FAA to acknowledge receipt of their comments

submitted in response to this rule must submit a self-addressed,

stamped postcard on which the following statement is made: ``Comments

to Docket Number 95-NM-260-AD.'' The postcard will be date stamped and

returned to the commenter.

The regulations adopted herein will not have substantial direct

effects on the States, on the relationship between the national

government and the States, or on the distribution of power and

responsibilities among the various levels of government. Therefore, in

accordance with Executive Order 12612, it is determined that this final

rule does not have sufficient federalism implications to warrant the

preparation of a Federalism Assessment.

The FAA has determined that this regulation is an emergency

regulation that must be issued immediately to correct an unsafe

condition in aircraft, and that it is not a ``significant regulatory

action'' under Executive Order 12866. It has been determined further

that this action involves an emergency regulation under DOT Regulatory

Policies and Procedures (44 FR 11034, February 26, 1979). If it is

determined that this emergency regulation otherwise would be

significant under DOT Regulatory Policies and Procedures, a final

regulatory evaluation will be prepared and placed in the Rules Docket.

A copy of it, if filed, may be obtained from the Rules Docket at the

location provided under the caption ADDRESSES.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Safety.

Adoption of the Amendment

Accordingly, pursuant to the authority delegated to me by the

Administrator, the Federal Aviation Administration amends part 39 of

the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 USC 106(g), 40101, 40113, 44701.

Sec. 39.13 [Amended]

2. Section 39.13 is amended by adding the following new

airworthiness directive:

96-01-04 SAAB Aircraft AB: Amendment 39-9480. Docket 95-NM-260-AD.

Applicability: Model SAAB SF340A series airplanes, serial

numbers 004 through 159 inclusive; and Model SAAB 340B series

airplanes, serial numbers 160 and subsequent; certificated in any

category.

Note 1: This AD applies to each airplane identified in the

preceding applicability provision, regardless of whether it has been

modified, altered, or repaired in the area subject to the

requirements of this AD. For airplanes that have been modified,

altered, or repaired so that the performance of the requirements of

this AD is affected, the owner/operator must use the authority

provided in paragraph (c) of this AD to request approval from the

FAA. This approval may address either no action, if the current

configuration eliminates the unsafe condition; or different actions

necessary to address the unsafe condition described in this AD. Such

a request should include an assessment of the effect of the changed

configuration on the unsafe condition addressed by this AD. In no

case does the presence of any modification, alteration, or repair

remove any airplane from the applicability of this AD.

Compliance: Required as indicated, unless accomplished

previously.

To prevent failure of the auto-ignition system to re-light the

engine in the event of power interruptions due to the ingestion of

ice and/or slush into the engine, which could result in engine

flameout and subsequent shutdown; and to provide the flight crew

with guidance to aid in avoidance of such occurrences; accomplish

the following:

(a) Within 10 days after the effective date of this AD, revise

the FAA-approved Airplane Flight Manual (AFM) to include the text

contained in paragraphs (a)(1), (a)(2), (a)(3), and (a)(4) of this

AD, as applicable. This may be accomplished by inserting a copy of

this AD into the AFM.

(1) For Model SAAB SF340A series airplanes: Insert the following

sub-section in the Limitations Section of the AFM:

``IGNITION SYSTEM

Prior to each flight, before engine start, perform a check of

the auto-ignition system.

Select batteries ON (external power ON or OFF).

Check that IGN switches are in NORM position.

Advance PLs above FLT IDLE and verify the IGN lights in

the Flight Status Panel (FSP) illuminate. In bright sunlight, shade

FSP to ensure IGN lights are visible when illuminated.

Retard PLs to GND IDLE. (IGN lights should go out.)

If an IGN light fails to illuminate when PLs are above

FLT IDLE, the auto-ignition system is considered to be inoperative.

If the auto-ignition system is inoperative:

BEFORE ENTERING ICING CONDITIONS, SET IGNITION TO CONT.

Maintain ignition in CONT until touchdown, even if icing conditions

cease to exist.''

(2) For Model SAAB 340B series airplanes: Insert the following

sub-section in the Limitations Section of the AFM:

``IGNITION SYSTEM

After each engine shutdown, perform a check of the auto-ignition

system.

Adjust Ng to approximately 75%-77%; minimum is 75%.

Shut down the engines (CL to FUEL OFF).

Verify the IGN lights in the Flight Status Panel (FSP)

illuminate while Ng is above 62%. In bright sunlight, shade the FSP

to ensure that lights are visible when illuminated.

If an IGN light fails to illuminate, the auto-ignition

system is considered to be inoperative.

Retard PLs to GND IDLE.

If the auto-ignition system is inoperative:

BEFORE ENTERING ICING CONDITIONS, SET IGNITION TO CONT.

Maintain ignition in CONT until touchdown, even if icing conditions

cease to exist.''

(3) For all airplanes: Insert the following in the Limitations

Section of the AFM, under Icing Conditions:

``Icing conditions exist when visible moisture in any form is

present (such as clouds, fog with visibility of one mile or less,

rain, snow, sleet, ice crystals) or standing water, slush, or snow

(hard packed snow excluded) is present on the ramps, taxiways, or

runways and the OAT or SAT is +10 degrees C and below during ground

and flight operation.''

(4) For all airplanes: Insert the following in the Normal

Procedures Section of the AFM, under Operation in Icing Conditions:

``CAUTION

Engine power interruptions may occur at ISA to ISA +20 degrees

Celsius temperature and in light (or undetected) icing conditions,

or shortly after exiting these conditions. Engine function will

normally be recovered by the auto-ignition system before any serious

loss of power. To aid in avoidance of these occurrences:

Engine anti-ice systems must be activated prior to

entering icing conditions, and maintained ON for at least 5 minutes

after exiting icing conditions.''

(b) For Model SAAB 340B series airplanes: If an auto-ignition

system is found to be inoperative, prior to further flight, perform

an Np overspeed test to ensure that the Np overspeed system is

operative, in accordance with the procedures specified in General

Electric Maintenance Manual SEI-576. If the Np overspeed system is

found to be inoperative, prior to further flight, repair in

accordance with the procedures specified in General Electric

Maintenance Manual SEI-576.

(c) An alternative method of compliance or adjustment of the

compliance time that provides an acceptable level of safety may be

used if approved by the Manager, Standardization Branch, ANM-113,

FAA, Transport Airplane Directorate. Operators shall submit their

requests through an appropriate FAA Principal Maintenance Inspector,

who may add comments and then send it to the Manager,

Standardization Branch, ANM-113.

-Note 2: Information concerning the existence of approved

alternative methods of compliance with this AD, if any, may be

obtained from the Standardization Branch, ANM-113.

(d) Special flight permits may be issued in accordance with

sections 21.197 and 21.199 of the Federal Aviation Regulations (14

CFR 21.197 and 21.199) to operate the airplane to a location where

the requirements of this AD can be accomplished.

(e) This amendment becomes effective on January 23, 1996.

Issued in Renton, Washington, on January 2, 1996.

Darrell M. Pederson,

Acting Manager, Transport Airplane Directorate, Aircraft Certification

Service.

[FR Doc. 96-188 Filed 1-5-96; 8:45 am]

BILLING CODE 4910-13-U

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.