§ 299.17 Incorporation by reference.

Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved material is available for inspection at Federal Railroad Administration, Docket Clerk, 1200 New Jersey Avenue SE, Washington, DC 20590 (telephone: 202-493-6052); email:

FRALegal@dot.gov

and is available from the sources indicated in this section. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email

fedreg.legal@nara.gov

or go to www.archives.gov/federal-register/cfr/ibr-locations.html.

(a) ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,

www.astm.org.

(1) ASTM D 4956-07

ε

1

, Standard Specification for Retroreflective Sheeting for Traffic Control, approved March 15, 2007; into § 299.423.

(2) ASTM E 810-03, Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry, approved February 10, 2003; into § 299.423.

(3) ASTM E 2073-07, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings, approved July 1, 2007; into § 299.423.

(b) Japanese Standards Association 3-13-12 Mita, Minato-ku, Tokyo, 108-0073, Japan,

www.jsa.or.jp

(Japanese site), or

www.jsa.or.jp/en

(English site).

(1) JIS B 8265:2010(E) “Construction of pressure vessels-general principles,” Published December 27, 2010, Second English edition, published December 2013; into § 299.409.

(2) JIS E 1101:2001(E), “Flat bottom railway rails and special rails for switches and crossings of non-treated steel,” Published March 21, 2001, Second English edition, published August 2008; into § 299.13(d).

(3) JIS E 1101:2006(E) “Flat bottom railway rails and special rails for switches and crossings of non-treated steel,” (Amendment 1), Published March 27, 2006, First English edition, published December 2006; into § 299.13(d).

om railway rails and special rails for switches and crossings of non-treated steel,” Published March 21, 2001, Second English edition, published August 2008; into § 299.13(d).

(3) JIS E 1101:2006(E) “Flat bottom railway rails and special rails for switches and crossings of non-treated steel,” (Amendment 1), Published March 27, 2006, First English edition, published December 2006; into § 299.13(d).

(4) JIS E 1101:2012(E) “Flat bottom railway rails and special rails for switches and crossings of non-treated steel,” (Amendment 2), Published February 20, 2012, First English edition, May 2012; into § 299.13(d).

(5) JIS E 7105:2006(E), “Rolling Stock—Test methods of static load for body structures,” Published February 6, 2006, First English edition published May 2010; into § 299.403(b).

(6) JIS E 7105:2011(E), “Rolling Stock—Test methods of static load for body structures,” (Amendment 1) Published September 7, 2011, First English edition, published December 2011; into § 299.403(b).