Reference to Specifications in Drawings.

FederalRegulations

Ask Donna

How this section applies to your facts.

Title 48 CFR: Federal Acquisition Regulations System › Chapter 5: GENERAL SERVICES ADMINISTRATION › Part 552: SOLICITATION PROVISIONS AND CONTRACT CLAUSES › Subpart 552.2: Subpart 552.2—Text of Provisions and Clauses › § 552.211-72: Reference to Specifications in Drawings.

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

As prescribed in 511.204(a), insert the following clause:

References to Specifications in Drawings (FEB 1996)

If military or other drawings are made a part of this contract, any reference in the drawings to Federal specifications or standards will be considered to be a reference to the date of such Federal specification or standard identified in the contract. If the date of the Federal specification or standard is not identified in the contract, the edition, including revisions thereto, in effect on the date the solicitation is issued will apply.

(End of clause)

[64 FR 37229, July 9, 1999, as amended at 74 FR 66255, Dec. 15, 2009]

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.