§ 1910.176 Handling materials—general.
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 29 CFR: Labor › Chapter XVII: OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR › Part 1910: OCCUPATIONAL SAFETY AND HEALTH STANDARDS › Subpart N: Materials Handling and Storage › § 1910.176: § 1910.176 Handling materials—general.
Text
(a)
Use of mechanical equipment.
Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
(b)
Secure storage.
Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(c)
Housekeeping.
Storage areas shall be kept free from accumulation of materials that constitute hazards from tripping, fire, explosion, or pest harborage. Vegetation control will be exercised when necessary.
(d) [Reserved]
(e)
Clearance limits.
Clearance signs to warn of clearance limits shall be provided.
(f)
Rolling railroad cars.
Derail and/or bumper blocks shall be provided on spur railroad tracks where a rolling car could contact other cars being worked, enter a building, work or traffic area.
(g)
Guarding.
Covers and/or guardrails shall be provided to protect personnel from the hazards of open pits, tanks, vats, ditches, etc.
[39 FR 23052, June 27, 1974, as amended at 43 FR 49749, Oct. 24, 1978]
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.