§ 1910.101 Compressed gases (general requirements).
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 29 CFR: Labor › Chapter XVII: OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR › Part 1910: OCCUPATIONAL SAFETY AND HEALTH STANDARDS › Subpart H: Hazardous Materials › § 1910.101: § 1910.101 Compressed gases (general requirements).
Text
(a)
Inspection of compressed gas cylinders.
Each employer shall determine that compressed gas cylinders under his control are in a safe condition to the extent that this can be determined by visual inspection. Visual and other inspections shall be conducted as prescribed in the Hazardous Materials Regulations of the Department of Transportation (49 CFR parts 171-179 and 14 CFR part 103). Where those regulations are not applicable, visual and other inspections shall be conducted in accordance with Compressed Gas Association Pamphlets C-6-1968 and C-8-1962, which is incorporated by reference as specified in § 1910.6.
(b)
Compressed gases.
The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in § 1910.6.
(c)
Safety relief devices for compressed gas containers.
Compressed gas cylinders, portable tanks, and cargo tanks shall have pressure relief devices installed and maintained in accordance with Compressed Gas Association Pamphlets S-1.1-1963 and 1965 addenda and S-1.2-1963, which is incorporated by reference as specified in § 1910.6.
[39 FR 23502, June 27, 1974, as amended at 61 FR 9236, Mar. 7, 1996]
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.