§ 1207.3 Definitions.

(a) As used in this part 1207:

(1)

Aboveground pool slide ladder

means a slide ladder that is not anchored in the ground or support deck and that can be removed from the slide or hinged and locked so that unauthorized or unsupervised use of the slide is prevented.

(2)

Abrasion hazard

means a sharp or rough surface of a swimming pool slide that would scrape the skin upon casual contact.

(3)

Assembled product

means all parts, components, and fasteners as defined in and assembled according to the manufacturer's assembly and installation instructions.

(4)

Bracing

means members providing structural support to the assembled, installed slide.

(5)

Casual contact

means contact of any body part with the slide occurring by chance or nonchalant encounters.

(6)

Center of gravity

means the point that represents the mean position of the concentrated mass of a body.

(7)

Curved slide

means a slide whose runway curves out of the vertical plane at any point along the slide path.

(8)

Cutting hazard

means a slide surface that would cut the skin under casual contact.

(9)

Designated waterline

means the horizontal line through whichever of the following is applicable: (i) The midpoint of the operating range of the skimmers, or (ii) on pools with overflow systems, the height of the overflow rim.

(10)

Edge guards

means shields designed to cover sharp edges on slides.

(11) [Reserved]

(12)

Freestanding slide

means a slide designed for aboveground pools that is not fastened to the pool deck or the ground. This slide may have attachments to the aboveground pool to prevent misalignment.

(13)

Friction

means the force tending to reduce the velocity of the slider on the slide.

(14) [Reserved]

(15)

Intended use

means behavior on swimming pool slides as disclosed by the manufacturer, as specified in this part 1207, or to which the slide may be subjected by a reasonable user (including reasonably foreseeable misuse).

(16)

Ladder angle

means the angle of the ladder measured from a plumbline.

Friction

means the force tending to reduce the velocity of the slider on the slide.

(14) [Reserved]

(15)

Intended use

means behavior on swimming pool slides as disclosed by the manufacturer, as specified in this part 1207, or to which the slide may be subjected by a reasonable user (including reasonably foreseeable misuse).

(16)

Ladder angle

means the angle of the ladder measured from a plumbline.

(17)

Ladder platform

means a platform built into the slide ladder.

(18)

Operational strength

means the strength of the slide and/or its components after installation according to the manufacturer's instructions.

(19)

Performance test

means a test to measure the functional or structural characteristics of the slide and may include:

(i) Observations and measurements of the slide's functioning in the “intended use” mode, installed according to the manufacturer's installation instructions, and/or

(ii) Observations and measurements of the slide's response to dynamic and static loads.

(20) [Reserved]

(21)

Pinching hazard

means any configuration of slide components that would pinch or entrap the fingers or toes of a child or an adult.

(22)

Puncture hazard

means any slide surface or protrusion that would puncture a child's skin under casual contact.

(23)

Runway

means the surface on which the user slides in the intended use of a slide.

(24)

Runway rail

means a raised edge or guard that keeps the slider on the runway.

(25)

Runway length

means the length of the runway measured along its centerline.

(26)

Slide width

means the width of the slide runway measured between the inside of the left and right runway rails.

(27)

Straight slide

means a slide whose runway curves only in the vertical plane.

(28)

Swimming pool slide

means any device used to enter a swimming pool by sliding down an inclined plane.

(29)

Tamperproof

means that tools are required to alter or remove portions of the slide such as guards, treads, etc.

(30)

Trajectory

means the path of a slider's center of gravity from start to finish.

(31) [Reserved]

traight slide

means a slide whose runway curves only in the vertical plane.

(28)

Swimming pool slide

means any device used to enter a swimming pool by sliding down an inclined plane.

(29)

Tamperproof

means that tools are required to alter or remove portions of the slide such as guards, treads, etc.

(30)

Trajectory

means the path of a slider's center of gravity from start to finish.

(31) [Reserved]

(32)

Tread contact surface

means foot contact surfaces of ladder, step, stair, or ramp.

[41 FR 2751, Jan. 19, 1976, as amended at 43 FR 58813, Dec. 18, 1978]