§ 1207.10 Handling, storage, and marking.

FederalRegulations

Ask Donna

How this section applies to your facts.

Title 16 CFR: Commercial Practices › Chapter II: CONSUMER PRODUCT SAFETY COMMISSION › Part 1207: SAFETY STANDARD FOR SWIMMING POOL SLIDES › § 1207.10: § 1207.10 Handling, storage, and marking.

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

(a)

Marking.

The manufacturer's or private labeler's identification shall appear on the slide and shipping container. Such identification shall include the identity and address of the manufacturer or private labeler. If a private labeler's name is used, the marking shall include a code mark that will permit an identification of the manufacturer.

(b)

Shipping, handling, and storage.

The slide shall be designed, constructed, or packaged so that reasonably foreseeable shipping, handling, and storage will not cause defects in the slide that will prevent the slide from complying with the requirements of this part 1207.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.