§ 27.605 Fabrication methods.
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 14 CFR: Aeronautics and Space › Chapter I: FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION › Part 27: AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT › Subpart D: Design and Construction › § 27.605: § 27.605 Fabrication methods.
Text
(a) The methods of fabrication used must produce consistently sound structures. If a fabrication process (such as gluing, spot welding, or heat-treating) requires close control to reach this objective, the process must be performed according to an approved process specification.
(b) Each new aircraft fabrication method must be substantiated by a test program.
(Secs. 313(a), 601, 603, 604, and 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424 and 1425); sec. 6(c) of the Dept. of Transportation Act (49 U.S.C. 1655(c)))
[Doc. No. 5074, 29 FR 15695, Nov. 24, 1964, as amended by Amdt. 27-16, 43 FR 50599, Oct. 30, 1978]
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.