§ 80.8 Sampling methods for gasoline, diesel fuel, fuel additives, and renewable fuels.

FederalRegulations

Ask Donna

How this section applies to your facts.

Title 40—Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER C—AIR PROGRAMS > PART 80—REGULATION OF FUELS AND FUEL ADDITIVES > Subpart A—General Provisions

This text was captured on Sep 22, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

(a) Manual sampling. Manual sampling of tanks and pipelines shall be performed according to the applicable procedures specified in ASTM D4057 (incorporated by reference, see § 80.12).

(b) Automatic sampling. Automatic sampling of petroleum products in pipelines shall be performed according to the applicable procedures specified in ASTM D4177 (incorporated by reference, see § 80.12).

(c) Sampling and sample handling for volatility measurement. Samples to be analyzed for Reid Vapor Pressure (RVP) shall be collected and handled according to the applicable procedures specified in ASTM D5842 (incorporated by reference, see § 80.12).

(d) Sample compositing. Composite samples shall be prepared using the applicable procedures specified in ASTM D5854 (incorporated by reference, see § 80.12).

[88 FR 44563, July 12, 2023]

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.