§ 147.103 Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule.
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 40—Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER D—WATER PROGRAMS > PART 147—STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS > Subpart C—Alaska
Text
Maximum injection pressure. The owner or operator shall limit injection pressure to the lesser of:
(a) A value which will not exceed the operating requirements of § 144.28(f)(3) (i) or (ii) as applicable; or
(b) A value for well head pressure calculated by using the following formula:
Pm = (0.733-0.433 Sg)d
where:
Pm = injection pressure at the well head in pounds per square inch
Sg = specific gravity of inject fluid (unitless)
d = injection depth in feet.
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.