§ 550.115 How do I determine well producibility?
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 30—Mineral Resources > CHAPTER V—BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR > SUBCHAPTER B—OFFSHORE > PART 550—OIL AND GAS AND SULFUR OPERATIONS IN THE OUTER CONTINENTAL SHELF > Subpart A—General > Performance Standards
Text
You must follow the procedures in this section to determine well producibility if your well is not in the GOA. If your well is in the GOA you must follow the procedures in either this section or in § 550.116 of this subpart.
(a) You must write to the Regional Supervisor asking for permission to determine producibility.
(b) You must either:
(1) Allow the Regional Supervisor to witness each test that you conduct under this section; or
(2) Receive the Regional Supervisor prior approval so that you can submit either test data with your affidavit or third party test data.
(c) If the well is an oil well, you must conduct a production test that lasts at least 2 hours after flow stabilizes.
(d) If the well is a gas well, you must conduct a deliverability test that lasts at least 2 hours after flow stabilizes, or a four-point back pressure test.
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.