§ 3280.6 Serial number.

FederalRegulations

Ask Donna

How this section applies to your facts.

Title 24—Housing and Urban Development > Subtitle B—Regulations Relating to Housing and Urban Development > CHAPTER XX—OFFICE OF ASSISTANT SECRETARY FOR HOUSING—FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT > PART 3280—MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS > Subpart A—General

This text was captured on Sep 22, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

(a) A manufactured home serial number which will identify the manufacturer and the state in which the manufactured home is manufactured, must be stamped into the foremost cross member. Letters and numbers must be

3/8 inch minimum in height. Numbers must not be stamped into hitch assembly or drawbar.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.