WAC 246-359-005. Applicability

WashingtonRegulations

Ask Donna

How this section applies to your facts.

Washington Administrative Code › Title 246 › Chapter 246-359 › Section 246-359-005

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

(1) This chapter applies only to temporary worker housing as defined in RCW 43.70.334 through 43.70.340 and chapter 70.114A RCW.

(2) TWH meeting the requirements of subsection (1) of this section must:

(a) Be located on a rural worksite; and

(b) Comply with:

(i) Chapter 246-358 WAC (TWH rules); and

(ii) The electrical code, chapter 296-46B WAC.

(3) Existing structures built as nonresidential buildings, according to the state building code, may be licensed as TWH by complying with the specific requirements of WAC 246-359-600 , alternate construction, and approved under the authority of this chapter.

(4) Alterations to residential housing constructed according to the state building code and approved by the authority having jurisdiction must comply with:

(a) The authority having jurisdiction for issuing building permits; and

(b) This chapter.

(5) TWH built in compliance with this chapter is exempt from state building code accessibility laws, RCW 19.27.031 (5).

(6) Temporary worker housing built in compliance with this chapter which is subsequently converted to another use becomes subject to all local requirements for such use as enforced by the authority having jurisdiction.

(7) This chapter does not apply to:

(a) Housing built for use by the general public which is governed by chapter 59.18 RCW (Residential Landlord-Tenant Act) or chapter 59.20 RCW (Mobile Home Landlord-Tenant Act);

(b) Factory assembled structures as defined in this chapter, except for the requirements in subsection (8) of this section; and

(c) The construction of structures governed by the state building code and enforced by the authority having jurisdiction.

(8) This chapter is limited to issuing a construction permit for factory assembled structures to meet the following requirements:

(a) On-site installation; and

(b) Inspection of the site, foundation, and hook-ups, including, but not limited to: Potable water, sewage disposal systems, or gas connections.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.

WAC 246-359-005. Applicability · WAC 246-359-005 | Frix