31 TAC § 55.205. Identification and Marking Requirements

TexasRegulations

Ask Donna

How this section applies to your facts.

Texas Administrative Code › Title 31 NATURAL RESOURCES AND CONSERVATION › Part 2 TEXAS PARKS AND WILDLIFE DEPARTMENT › Chapter 55 LAW ENFORCEMENT › 31 TAC § 55.205

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

All floating cabins required to be permitted under the provisions of Parks and Wildlife Code, Chapter 32, shall be marked as follows.

(1) The permit number must be displayed on the outside of the cabin area on two opposite sides. The number shall be attached to or painted in block arabic letters of good proportion in contrasting color to the background and be at least three inches in height. The assigned permit numbering pattern consists of the prefix "FC" followed by a combination of numerals and an annual validation sticker. The group of numerals appearing between the letters and validation sticker shall be separated by a hyphen or equivalent space.

(2) Each floating cabin must exhibit an orange reflector measuring a minimum of 3 inches. Reflectors shall be mounted on the outer 1/3 portion of each side of the floating cabin in a manner allowing an unobstructed view from an approach to the side.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.