38-02-05. Tunnel, opencuts, crosscuts, adits, or drilling equivalent to discovery shaft

North DakotaStatutes

Ask Donna

How this section applies to your facts.

ND Code › Title 38 › Chapter 38-02 › Section 38-02-05

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

38-02-05. Tunnel, opencuts, crosscuts, adits, or drilling equivalent to discovery shaft

Any opencut, crosscut, or tunnel at a depth sufficient to disclose the mineral vein or lode, an

adit of at least ten feet [3.05 meters] in along the lode from the point where the lode may be

discovered, or the drilling of a hole or holes in the manner, and under the conditions and

requirements hereinafter set forth, is equivalent to a discovery shaft. The hole or holes must be

not less than one and one-half inches [3.81 centimeters] in diameter, must be sufficiently deep

to reach and cut or expose the mineral vein or lode, and must be protected at the surface

opening against injury to livestock. The discoverer shall designate one of the holes thus drilled

as the discovery hole, in the event that more than one such hole has been drilled.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.