COMAR 26.11.32.07. Standards — Requirements for Floor Wax Strippers
MarylandRegulations
Ask Donna
How this section applies to your facts.
Code of Maryland Regulations › Title 26 DEPARTMENT OF THE ENVIRONMENT › Subtitle 11 AIR QUALITY › Chapter 32 Control of Emissions of Volatile Organic Compounds from Consumer Products › COMAR 26.11.32.07
Text
A person may not sell, supply, offer for sale, or manufacture, for use in the State, a floor wax stripper unless the following requirements are met:
A. The label of each non-aerosol floor wax stripper shall specify a dilution ratio for light or medium build-up of polish that results in an as-used VOC concentration of 3 percent by weight or less;
B. If a non-aerosol floor wax stripper is intended to be used for removal of heavy build-up of polish, the label of that floor wax stripper shall specify a dilution ratio for heavy build-up of polish that results in an as-used VOC concentration of 12 percent by weight or less; and
C. The terms “light build-up”, “medium build-up”, or “heavy build-up” are not specifically required on the product label if comparable terminology is used.
Cross References 26.11.32.04B
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.