7 DE Admin. Code 1105. Particulate Emissions from Industrial Process Operations

Process Weight Rate (Pounds Per Hour) | Stack Emission Rate (Pounds Per Hour)

10,000 20,000 30,000 40,000 50,000 100,000 200,000 300,000 400,000 500,000 600,000 | 10 16 22 28 31 33 37 40 43 47 50

Process Weight Rate (Pounds per Hour) | Stack Emission Rate (Pounds per Hour)

1,000 | 0.75

2,000 | 1.50

3,000 | 2.25

4,000 | 3.00

5,000 | 3.75

6,000 | 4.50

7,000 | 5.25

8,000 | 6.00

9,000 | 6.75

10,000 | 7.50

12,000 | 9.00

16,000 | 12.00

18,000 | 13.50

20,000 | 15.00

30,000 | 22.50

40,000 | 30.00

50,000 | 37.50

Coke Burn-Off Rate (Pounds per Hour) | Mass Emission Rate (Pounds per Hour)

7,000 | 50

14,000 | 100

21,000 | 150

28,000 | 200

42,000 | 300

56,000 | 400

70,000 | 500

Process Weight Rate (Barrels per Day of Fresh Feed) | Mass Emission Rate (Pounds per Hour)

5,000 | 15

10,000 | 30

15,000 | 50

20,000 | 80

30,000 | 100

40,000 | 125

50,000 | 150

Process Weight Rate (Pounds per Hour) | Mass Emission Rate (Pounds per Hour)

5,000 | 25

10,000 | 50

15,000 | 75

20,000 | 100

25,000 | 125

50,000 | 250

75,000 | 375

100,000 | 500

1.0 General Provisions

1.1 The emission of particulate matter from industrial process equipment shall be controlled to a limit that shall meet the ambient air quality requirements.

1.2 The provisions of this regulation shall not apply to indirect heat exchangers which shall be controlled by 7 DE Admin. Code 1104 .

1.3 For all tables in this regulation, unless otherwise indicated, the emission limitation for a process weight rate between any 2 consecutive process weight rates shall be determined by linear interpolation.

1.4 For all tables in this regulation, unless otherwise indicated, the emission limitation for process weight rate above the maximum process weight rate or below the minimum process weight rate shall be determined by linear extrapolation.

1.5 For purposes of this regulation, the allowable mass emission rate of particulate matter shall be determined for individual units of equipment

interpolation.

1.4 For all tables in this regulation, unless otherwise indicated, the emission limitation for process weight rate above the maximum process weight rate or below the minimum process weight rate shall be determined by linear extrapolation.

1.5 For purposes of this regulation, the allowable mass emission rate of particulate matter shall be determined for individual units of equipment.

1.6 For operations involving similar units which are manifolded to a common stack, control techniques shall be such that no unit is emitting particulate matter at a rate which is in excess of the mass emission rate allowed by this regulation.

20 DE Reg. 556 (01/01/17)

28 DE Reg. 585 (02/01/25)

2.0 General Restrictions

No person shall cause or allow particulate emissions into the atmosphere from any source not provided for in subsequent sections of this regulation in excess of 0.2 grains per standard cubic foot.

20 DE Reg. 556 (01/01/17)

28 DE Reg. 585 (02/01/25)

3.0 Restrictions on Hot Mix Asphalt Batching Operations

3.1 No person shall cause or allow particulate emissions from a hot mix asphalt batching plant into the atmosphere in excess of the quantity as listed in Table 3-1 of this regulation.

Table 3-1

Allowable Mass Emission Rate From Hot Mix Asphalt Batching Operation

4.0 Restrictions on Secondary Metal Operations

4.1 No person shall cause or allow particulate emissions from secondary metal operations into the atmosphere in excess of the quantity as listed in Table 4-1 of this regulation.

Table 4-1

Allowable Mass Emission Rate From Secondary Metal Operations

4.2 The provisions of subsection 4.1 of this regulation shall not apply to electric arc furnaces, and their associated dust-handling equipment, with a capacity of more than 100 tons.

20 DE Reg. 556 (01/01/17)

5.0 Restrictions on Petroleum Refining Operations

5.1 No person shall cause or allow particulate emissions from catalytic cracking operations into the atmosphere in excess of the quantities as indicated in Table 5-1 of this regulation

s regulation shall not apply to electric arc furnaces, and their associated dust-handling equipment, with a capacity of more than 100 tons.

20 DE Reg. 556 (01/01/17)

5.0 Restrictions on Petroleum Refining Operations

5.1 No person shall cause or allow particulate emissions from catalytic cracking operations into the atmosphere in excess of the quantities as indicated in Table 5-1 of this regulation. For the purpose of interpolation and extrapolation calculations, "Coke Burn-Off Rate" shall be construed to be equivalent to "Process Weight Rate."

Table 5-1

Allowable Mass Emission Rate From Catalytic Cracking Operations

5.2 No person shall cause or allow particulate emissions from fluid coking operations into the atmosphere in excess of the quantities as indicated in Table 5-2 of this regulation.

Table 5-2

Allowable Mass Emission Rate From Fluid Coking Operations

20 DE Reg. 556 (01/01/17)

28 DE Reg. 585 (02/01/25)

6.0 Restrictions on Prill Tower Operation

6.1 No person shall cause or allow particulate emissions from prilling operations into the atmosphere in excess of the quantities as indicated in Table 6-1 of this regulation.

Table 6-1

Allowable Mass Emissions Rate From Prilling Operations

28 DE Reg. 585 (02/01/25)

7.0 Control of Potentially Hazardous Particulate Matter

Persons responsible for a source operation from which potentially hazardous particulate matter may be emitted such as, but not limited to, lead, arsenic, beryllium, silica, asbestos, and other such materials shall list such contaminants and their exit concentrations in a written report to the Department. The Department shall assign emission limits on an individual basis.

12 DE Reg. 347 (09/01/08)

20 DE Reg. 556 (01/01/17)

28 DE Reg. 585 (02/01/25)