§ 229.47 Emergency brake valve.
FederalRegulations
Ask Donna
How this section applies to your facts.
Title 49 CFR: Transportation › Chapter II: FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION › Part 229: RAILROAD LOCOMOTIVE SAFETY STANDARDS › Subpart C: Safety Requirements › § 229.47: § 229.47 Emergency brake valve.
Text
(a) Except for locomotives with cabs designed for occupancy by only one person, each road locomotive shall be equipped with a brake pipe valve that is accessible to a member of the crew, other than the engineer, from that crew member's position in the cab. On car body type locomotives, a brake pipe valve shall be attached to the wall adjacent to each end exit door. The words “Emergency Brake Valve” shall be legibly stenciled or marked near each brake pipe valve or shall be shown on an adjacent badge plate.
(b) DMU, MU, and control cab locomotives operated in road service shall be equipped with an emergency brake valve that is accessible to another crew member in the passenger compartment or vestibule. The words “Emergency Brake Valve” shall be legibly stenciled or marked near each valve or shall be shown on an adjacent badge plate.
[45 FR 21109, Mar. 31, 1980, as amended at 71 FR 61857, Oct. 19, 2006]
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.