Wonderland Nurserygoods Co Ltd v. Baby Trend, Inc.

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 1 of 31 Page ID #:26937

O

UNITED STATES DISTRICT COURT

FOR THE CENTRAL DISTRICT OF CALIFORNIA

WONDERLAND NURSERYGOODS Case No. 5:14-cv-01153-JWH-SP

CO., LTD.,

Plaintiff, MEMORANDUM OPINION AND

ORDER ON PLAINTIFF’S

v. MOTION FOR PARTIAL

SUMMARY JUDGMENT [ECF

BABY TREND, INC., No. 310], DEFENDANT’S

DENNY TSAI, and MOTION FOR SUMMARY

BETTY TSAI, JUDGMENT [ECF Nos. 307 & 326],

and DEFENDANT’S DAUBERT

Defendants. MOTION [ECF No. 367]

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 2 of 31 Page ID #:26938

I. SUMMARY OF DECISION

Presently before the Court in this patent infringement case are three

motions:

• Plaintiff Wonderland NurseryGoods Co., Ltd. moves for summary judgment

of infringement against Defendant Baby Trend, Inc. with respect to

Baby Trend’s Category 1 products;1

• Baby Trend moves for summary judgment of non-infringement, invalidity,

and intervening rights;2 and

• Baby Trend moves to exclude and strike certain rebuttal opinions by Bryan

Van Uden, Wonderland’s damages expert.3

After considering the papers filed in support and in opposition, as wells as

the arguments presented at the hearing,4 for the reasons stated below, the Court

will:

• GRANT Wonderland’s motion for partial summary judgment;

• GRANT Baby Trend’s motion for summary judgment with respect to

intervening rights for Category 1 products; GRANT Baby Trend’s motion

with respect to non-infringement of Category 2 and Categories 3-6 products;

and GRANT Baby Trend’s motion with respect to invalidity based upon the

original patent requirement; and

1 Pl. Wonderland NurseryGoods Co., Ltd. Mot. for Part. Summ. J. (the

“Wonderland PMSJ”) [ECF No. 310].

2 Def. Baby Trend Inc.’s Mot. for Summ. J. (the “Baby Trend MSJ”) [ECF

Nos. 307 & 326 (sealed)].

3 Mot. under Daubert to Exclude and Strike Certain Opinions Offered by

Mr. Bryan Van Uden in Rebuttal (the “Van Uden Rebuttal Motion”) [ECF

Nos. 350 & 367 (sealed)].

4 To resolve these motions, in addition to the Court’s prior orders in this case,

the Court considered the following papers and all of their respective attachments,

including the sealed versions: (1) Compl. [ECF No. 1]; (2) Am. Answer [ECF

No. 118]; (3) Wonderland PMSJ; (4) Corrected Memo in Supp. of the Wonderland

PMSJ [ECF No. 314]; (5) Opp’n to the Wonderland PMSJ (the “PMSJ

Opposition”) [ECF No. 327]; (6) Reply in Supp. of the Wonderland PMSJ (the

“PMSJ Reply”) [ECF No. 336]; (7) Baby Trend MSJ; (8) Opp’n to the

Baby Trend MSJ (the “MSJ Opposition”) [ECF No. 334]; (9) Reply in Supp. of

the Baby Trend MSJ (the “MSJ Reply”) [ECF No. 336]; and (10) Wonderland’s

Joint Statement of Undisputed Facts (the “JSUF”) [ECF No. 330].

-2-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 3 of 31 Page ID #:26939

• DENY as moot Baby Trend’s Daubert motion regarding Van Uden’s

rebuttal opinions.

Based upon these rulings, the Court need not reach the issue of intervening rights

on Category 2 products.

For ease of reference, the Court provides the following summary table of its

rulings:

Product Asserted Rulings

Category Claims

No.

Category 1 Claims 1, 2, Wonderland’s motion for summary judgment of

& 4-29 infringement is GRANTED (see § III.A.);

Baby Trend’s motion for summary judgment

regarding intervening rights for Category 1 is

GRANTED (see § III.B.3.)

Category 2 Claims 8-11, Baby Trend’s motion for summary judgment

14-16, 19, & regarding non-infringement of Claims 8 and 15

29 and their respective dependent claims is

GRANTED (based upon the absence of

“positioning posts”) (see § III.B.1.b.i.)

Category 3 Claims 20 & Baby Trend’s motion for summary judgment

27 regarding non-infringement is GRANTED

(based upon the presence of rivets) (see

§ III.B.1.b.ii.)

Category 4 Claims 20, same as Category 3

27, & 28

Category 5 Claims 20, same as Category 3

27, & 28

Category 6 Claims 20 & same as Category 3

27

-3-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 4 of 31 Page ID #:26940

Other Rulings

Baby Trend’s motion for summary judgment of invalidity based upon the

original patent requirement is GRANTED (see § III.B.2.)

II. BACKGROUND

Wonderland is the assignee of the patent at issue in this case: U.S. Reissue

Patent No. 43,919, entitled “Baby Crib.”5 Wonderland accuses Baby Trend’s

activities of infringing the ’919 Patent.6

The ’919 Patent discloses “a baby crib that can be easily assembled” with “a

fabric member effectively positioned on a bed frame structure” to give the crib “an

appealing appearance.”7 The claimed baby crib sought to improve upon prior art

cribs, the assembly of which “consume[d] a lot of time” and the “outer

appearance” of which was unattractive because of visible screws attaching the

enclosure to the frame.8 Additionally, the enclosure was more likely to tear where

each screw penetrated the enclosure.9 The baby crib disclosed in the ’919 Patent

touts easy assembly, which in its preferred embodiment involves mounting

positioning posts on the enclosure and placing those posts into upright tubes on the

bed frame, without the need for exterior screws.

III. LEGAL STANDARD

Summary judgment is appropriate when there is no genuine issue as to any

material fact and the moving party is entitled to judgment as a matter of law. See

Fed. R. Civ. P. 56(a). When deciding a motion for summary judgment, the Court

construes the evidence in the light most favorable to the non-moving party. See

Barlow v. Ground, 943 F.2d 1132, 1135 (9th Cir. 1991). “[T]he mere existence of

some alleged factual dispute between the parties will not defeat an otherwise

5 See U.S. Reissue Patent No. RE43,919 (the “’919 Patent”) [ECF No. 1-1].

6 The remaining defendants—Betty Tsai and Denny Tsai—have been

dismissed. See Stip. of Voluntary Dismissal [ECF No. 322].

7 ’919 Patent 1:43-46.

8 Id. at 1:31-40.

9 Id.

-4-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 5 of 31 Page ID #:26941

properly supported motion for summary judgment; the requirement is that there be

no genuine issue of material fact.” Anderson v. Liberty Lobby, Inc., 477 U.S. 242,

247–48 (1986) (emphasis in original). The substantive law determines the facts

that are material. See id. at 248. “Only disputes over facts that might affect the

outcome of the suit under the governing law will properly preclude the entry of

summary judgment.” Id. Factual disputes that are “irrelevant or unnecessary”

are not counted. Id. A dispute about a material fact is “genuine” “if the evidence

is such that a reasonable jury could return a verdict for the nonmoving party.” Id.

Under this standard, the moving party bears the initial burden of informing

the district court of the basis for its motion and identifying the portions of the

pleadings and record that it believes demonstrate the absence of an issue of material

fact. See Celotex Corp. v. Catrett, 477 U.S. 317, 323 (1986). When the non-moving

party bears the burden of proof at trial, the moving party need not produce

evidence negating or disproving every essential element of the non-moving party’s

case. See id. at 325. Instead, the moving party need only prove there is an absence

of evidence to support the non-moving party’s case. See id.; In re Oracle Corp. Sec.

Litig., 627 F.3d 376, 387 (9th Cir. 2010). The party seeking summary judgment

must show that “under the governing law, there can be but one reasonable

conclusion as to the verdict.” Anderson, 477 U.S. at 250.

If the moving party sustains its burden, the non-moving party must then

show that there is a genuine issue of material fact that must be resolved at trial. See

Celotex, 477 U.S. at 324. A genuine issue of material fact exists “if the evidence is

such that a reasonable jury could return a verdict for the non-moving party.”

Anderson, 477 U.S. at 248. “This burden is not a light one. The non-moving party

must show more than the mere existence of a scintilla of evidence.” Oracle, 627

F.3d at 387 (citing Anderson, 477 U.S. at 252). The non-moving party must make

this showing on all matters placed at issue by the motion as to which it has the

burden of proof at trial. See Celotex, 477 U.S. at 322; Anderson, 477 U.S. at 252.

IV. DISCUSSION

A. Wonderland’s Motion for Partial Summary Judgment of Infringement

Wonderland seeks partial summary judgment of infringement by

Baby Trend’s Category 1 products because, Wonderland argues, “[t]here is no

genuine dispute that the Category 1 products satisfy each and every limitation of

-5-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 6 of 31 Page ID #:26942

claim 1.” Wonderland contends that those “products are a direct knock-off of the

preferred embodiment illustrated in Figures 3 and 5 of the ’919 Patent.” In

support of that contention, Wonderland provides the following comparison:"

’919 Patent, Fig. 5 Wisteria Lane Upright Tube

© : “ag

S&S Ce. &, ‘| - \ Gf, i .

an CF, nh a a sf 7 :

= 7 arte ‘919 Patent, Fig. 5 (annotated) = i Se

In further support of its infringement argument, Wonderland provides an

element-by-element comparison of the accused products with the claim

limitations.” Wonderland observes that Baby Trend has not identified any missing

claim elements in the accused products."

Baby Trend opposes Wonderland’s motion by maintaining that absolute

intervening rights preclude any infringement liability for its Category 1 products."*

0 Wonderland PMSJ 1:7-11.

u See id. at 3:2-20 & 4:11-25.

12 “See id. at 6:10-9:22.

8 Td. at 9:23-10:14.

4 PMSJ Opposition 1:8-9.

-6-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 7 of 31 Page ID #:26943

Baby Trend argues that “absolute intervening rights is a defense against patent

infringement—not merely a limitation on damages.”15

1. Legal Framework

Determining infringement of a utility patent is a two-step process. See Cybor

Corp. v. FAS Techs., Inc., 138 F.3d 1448, 1454 (Fed. Cir. 1998). “First, the court

determines the scope and meaning of the patent claims asserted, and then the

properly construed claims are compared to the allegedly infringing device.” Id.

(citations omitted). “Whether an accused device or method infringes a claim

either literally or under the doctrine of equivalents is a question of fact.” Schoell v.

Regal Marine Indus., Inc., 247 F.3d 1202, 1207 (Fed. Cir. 2001).

A defendant accused of infringing a reissue patent enjoys the additional

defense commonly known as “intervening rights.” Specifically, “[a] reissued

patent shall not abridge or affect the right of any person or that person’s successors

in business who, prior to the grant of a reissue, made, purchased, offered to sell, or

used within the United States, or imported into the United States, anything

patented by the reissued patent, to continue the use of, to offer to sell, or to sell to

others to be used, offered for sale, or sold, the specific thing so made, purchased,

offered for sale, used, or imported unless the making, using, offering for sale, or

selling of such thing infringes a valid claim of the reissued patent which was in the

original patent.” 35 U.S.C. § 252 (emphasis added).

2. Analysis

If the Court finds that intervening rights shield Baby Trend from

infringement liability (an issue discussed below in the context of Baby Trend’s

motion for summary judgment), then the parties dispute whether the Court should

(1) find infringement as a matter of law but rule that no damages are available

(Wonderland’s preference); or (2) decline to find infringement as a matter of law

because intervening rights preclude such a finding (Baby Trend’s preference).

Based upon the plain language of the relevant statutes, the Court concludes

that infringement must first be determined, and, then, if intervening rights apply,

there can be no damages for otherwise-infringing products. If there is no

15 Id. at 1:10-11.

-7-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 8 of 31 Page ID #:26944

infringement, then there is no occasion to consider whether intervening rights

apply.

First, the express terms of the primary patent infringement statute provide

that “[e]xcept as otherwise provided in this title, whoever without authority makes,

uses, offers to sell, or sells any patented invention, within the United States or

imports into the United States any patented invention during the term of the patent

therefor, infringes the patent.” 35 U.S.C. § 271 (emphasis added). The statute

pertaining to reissue patents does not create an exemption to infringement nor

negate the fact that otherwise-infringing products infringe; rather, it protects “the

right” of a person importing or selling a product that was not protected by a patent

when the person started importing/selling, but in the intervening period since

those sales/imports began, a reissue patent has been granted that now covers that

“specific thing” being imported/sold. 35 U.S.C. § 252 (emphasis added). When

read together, the Court finds nothing in § 252 that renders infringing conduct

non-infringing. Instead, § 252 provides a safe harbor—i.e., intervening rights—in

which the infringer cannot be held liable for its infringement.

This reading is supported by caselaw. Both the Supreme Court and the

Federal Circuit have treated absolute intervening rights—which shield products

that infringe enlarged reissue claims—as a doctrine that applies post-infringement

to prevent the patent holder from collecting damages. For example, in BIC Leisure

Prod., Inc. v. Windsurfing Int’l, Inc., 1 F.3d 1214, 1222 (Fed. Cir. 1993), the Federal

Circuit “discern[ed] no error in the trial court’s determination that the[] [accused]

sailboards were purchased within the meaning of section 252 before the critical

[reissue] date of March 8, 1983.” The court explained, “[b]ecause BIC purchased

the boards before the reissue date, the district court properly excluded the post-

reissue sale of the 10,870 sailboards from the computation of damages.” Id.

(emphasis added). The court did not find non-infringement.

Similarly, upon assuming that a reissue patent was infringed, the Supreme

Court “consider[ed] the effect of the enlarged [reissued] claims upon [the accused

infringer’s] machine, lawfully manufactured and operated prior to the[] inception”

of the enlarged claims, and found that the accused infringer “acquired at least a

right to continue to use these two [accused] machines as if it held a license therefor

under the reissued patent.” Sontag Chain Stores Co. Ltd. v. Nat’l Nut Co. of

California, 310 U.S. 281, 285, 295-96 (1940) (emphasis added). Again, the Court

did not reject the infringement finding based upon intervening rights, but, instead,

-8-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 9 of 31 Page ID #:26945

the Court concluded that there could be no liability for the affected products, just

as if the infringer held a license to use the reissued patent.

Accordingly, this Court rejects Baby Trend’s contention that intervening

rights can otherwise shield it from a finding of infringement. Because Baby Trend

does not challenge Wonderland’s assertion that the Category 1 products contain

every element of asserted Claim 1, there is no disputed issue of material fact

concerning infringement. Thus, the Court GRANTS Wonderland’s Motion.

However, because below the Court also grants Baby Trend’s Motion

concerning intervening rights, taken together, those rulings preclude Wonderland

from collecting damages on Category 1.

B. Baby Trend’s MSJ

1. Literal Infringement

Baby Trend moves for summary judgment that it does not literally infringe

Claims 8-11, 14-16, 19-20, and 27-29 of the ’919 Patent, all with respect to its

Category 2-6 Products.16

a. Legal Framework

The Court previously recited the two-step process for determining patent

infringement. See Cybor Corp., 138 F.3d at 1454. Because the ultimate burden of

proving infringement rests with the patentee, an accused infringer may establish

that summary judgment is proper “either by providing evidence that would

preclude a finding of infringement, or by showing that the evidence on file fails to

establish a material issue of fact essential to the patentee’s case.” Novartis Corp. v.

Ben Venue Labs., Inc., 271 F.3d 1043, 1046 (Fed. Cir. 2001). If the moving party

meets this initial requirement, then the burden shifts to the party asserting

infringement to set forth, by declaration or as otherwise permitted under Rule 56 of

the Federal Rules of Civil Procedure, “specific facts showing that there is a

genuine issue for trial.” Anderson, 477 U.S. at 248.

16 Baby Trend MSJ 1:4-6; see also id. at 1 n.1 (noting that Wonderland withdrew

its infringement allegations regarding Claims 1 and 3-5 with respect to the

Category 2 products); see also id. at 4:1-8 (chart summarizing asserted claims

against representative products by category).

-9-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 10 of 31 Page ID

#:26946

b. Analysis

i. Claims 8 and 15 and Their Dependent Claims

Baby Trend argues that it does not infringe the two independent claims of

the ’919 Patent because they require “a plurality of positioning posts”—which the

Court construed as “separate components from the fabric/enclosure member”—

and the accused Category 2 products do not have such separate positioning posts.17

Baby Trend rejects Wonderland’s infringement expert’s opinion that a “rolled

piece of binding” or fabric webbing sewn to the fabric member can the claimed

positioning post.18 Further, Baby Trend argues that the accused positioning post is

made out of fabric (instead of plastic, wood, or metal as described in the

specification), and, therefore, it cannot bear compressive and bending loads for

easy assembly.19

Wonderland responds that the Court’s claim construction for “positioning

post” said nothing about “separability,” and Baby Trend’s own expert’s

demonstration shows that the fabric member is a separate component from the

accused fabric webbing that satisfies the “positioning post” limitation.20 Further,

Wonderland notes that the Court’s claim construction placed no limits on the type

of material or physical properties of the positioning posts.21 Wonderland argues

that, taking the evidence in the light most favorable to Wonderland, its expert’s

testimony that “the rolled fabric webbing attached to the fabric enclosure and

placed into the upright tubes of the accused Category 2 Products satisfies the

‘positioning post’ limitations” at least creates a disputed issue of material fact.22

In reply, Baby Trend argues that no reasonable juror could find the rolled

fabric webbing to be the claimed positioning post and that Wonderland’s expert

provides no explanation to support his opinion to the contrary.23

17 Baby Trend MSJ 5:13-20; see also Claim Construction Order [ECF No. 170]

23.

18 Baby Trend MSJ 6:2-6.

19 Id. at 6:16-28.

20 MSJ Opposition 3:12-22.

21 Id. at 3:23-27.

22 Id. at 4:11-16.

23 MSJ Reply 1:24-26.

-10-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 11 of 31 Page ID

#:26947

In the Claim Construction Order, the Court ruled that “plain meaning

applies” to “positioning posts,” and, thus, “no further construction is needed.”

But “for the sake of clarity, the Court confirm[ed] that the [positioning post]

limitations make clear that the positioning posts are separate components from the

fabric/enclosure member.”24 For example, Claim 1 recites positioning posts

“mounted on” the fabric member.25

First, construing the evidence in the light most favorable to Wonderland, the

Court concludes that competing expert testimony regarding whether the rolled

fabric webbing is separate from the fabric member precludes a finding of non-

infringement on this particular point. The parties agree that the rolled fabric

webbing is sewn to the fabric member, necessarily implying that it began as a

separate component. Neither party points to anything in the ’919 Patent

suggesting that separate components cannot later be joined, especially where the

positioning posts are described as being “mounted on” the fabric member.26

Second, construing the evidence in the light most favorable to Wonderland,

the Court finds no disputed issue of material fact concerning non-infringement

with respect to “positioning posts.” No reasonable juror could conclude that a

“rolled piece of binding” or “fabric webbing” meets the positioning post

limitations.27 Although the specification teaches that the positioning posts can be

“formed as a flexible tube, such as a plastic or metal tube,” even considering this

flexibility, a rolled piece of fabric binding does not fall within the plain and ordinary

meaning of a “positioning post.”28

Wonderland’s expert attempts to controvert this fact by opining that the

positioning posts in the accused products “are comprised of a rolled piece of

binding (i.e., a separate component of the fabric member),” but he provides no

24 Claim Construction Order 23:8-12.

25 Id. at 23:13-15.

26 See, e.g., ’919 Patent at Abstract.

27 See JSUF ¶ 45 (Wonderland’s expert’s opinion attempting to controvert this

point).

28 ’919 Patent 2:39-43; see also id. at 2:60-62 (“[s]ince the positioning posts 22

are flexible, they can follow the curved configuration of the upright tubes 11 upon

insertion into the receiving holes 111” as shown in Fig. 4).

-11-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 12 of31 Page ID

#:26948

explanation that would support the conclusion that a person of ordinary skill would

understand the claimed “positioning posts” to encompass rolled fabric binding.”

□□

This conclusory opinion is insufficient to create a disputed issue of material

fact regarding the presence of positioning posts in the accused products. See, e.g.,

SIMO Holdings v. Hong Kong uCloudlink, 983 F.3d 1367, 1381 (Fed. Cir. 2021) (at

summary judgment, “a patentee’s expert must set forth the factual foundation for

his infringement opinion in sufficient detail for the court to be certain that features

of the accused product would support a finding of infringement”’) (quotation marks

omitted).

Accordingly, the Court GRANTS Baby Trend’s motion with respect to

non-infringement of Claims 8 and 15 by the Category 2 products.

ii. Claim 20 and Its Dependent Claims

Baby Trend argues that it does not infringe Claim 20 because each of the

accused Category 2-6 Products includes rivets that pierce the fabric member, which

“defeats a primary purpose of the ’919 Patent: easy assembly and disassembly.” *°

29 oint Exhibit, Part B, Expert Report of Peter J. Myers (the “Myers Report”’),

Ex. F Ace No. 307-3] 567, P P J. Myers (

30 Baby Trend MSJ 7:4-8.

-12-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 13 of 31 Page ID

#:26949

Specifically, “each of the Category 3-6 Products include[s] rivets at each corner of

the playard that result in a permanent connection of the fabric member that cannot

be disassembled.”31 Further, Baby Trend maintains that those products do not

infringe for the additional reasons that they do not perform the identical function to

the Figure 5 structure (mounting and securing the edge portions of the enclosure

member along the support tubes without the need for screws), in substantially the

same way, with substantially the same resulting structure.32

Wonderland responds that use of rivets does not preclude a finding of

infringement because “merely identifying objects of an invention [such as easy

assembly] does not mean that every claim in the patent must be construed to

include all of those objects as limitations, regardless of the actual claim language.”33

Wonderland argues that neither the claim language of Claim 20 nor the Court’s

construction thereof says anything about easy assembly.34 Specifically,

Wonderland contends that, in construing Claim 20 in light of Figure 5, “the Court

made no findings regarding whether some uses of fasteners could qualify as a § 112,

¶ 6 equivalent.”35 Rather than “disclaim[ing] all uses of rivets, screws, or other

types of fasteners,” Wonderland asserts that “[i]f anything, the ’919 Patent

disclaims only the prior art approach of stretching the fabric tightly over the outside

of the upright tubes and holding it in place with screws visible from the outside of

the playard, which created a risk of tearing and detracted from the appearance of

the playard.”36 Wonderland argues that the competing expert opinions create a

genuine issue of material fact concerning whether the accused products’

attachment structure with rivets is a § 112, ¶ 6 equivalent of Claim 20.37

In reply, Baby Trend argues that “easy assembly/disassembly and the

exclusion of external fasteners must, at the very least, be accounted for in the § 112,

31 Id. at 7:14-16.

32 Id. at 9:15-20 & 15:23-24; compare id. at 16:27-17:3 (“in the Category 3-6

Products, the fabric enclosure is wrapped around a metal rod/beam at each corner

of the playard,” which is “riveted at a top and bottom end to the outside of the

corner tube, and the bottom rivets pierce the fabric enclosure”).

33 MSJ Opposition 5:8-10.

34 Id. at 5:17-20.

35 Id. at 5:22-23.

36 Id. at 6:1-3, 7-10.

37 Id. at 6:13-27.

-13-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 14 of 31 Page ID

#:26950

¶ 6 statutory equivalents analysis.”38 “In view of the[] clear teachings of the

’919 Patent,” Baby Trend concludes that “there can be no reasonable dispute that

a POSA39 would consider these key facts in the § 112, ¶ 6 statutory equivalents

analysis even if not expressly recited in the claims.”40

Under the function-way-result test, “[l]iteral infringement of a means-plus-

function claim limitation requires that the relevant structure in the accused device

perform the identical function recited in the claim and be identical or equivalent to

the corresponding structure in the specification.” Applied Med. Res. Corp. v. U.S.

Surgical Corp., 448 F.3d 1324, 1333 (Fed. Cir. 2006). “Once the relevant structure

in the accused device has been identified, a party may prove it is equivalent to the

disclosed structure by showing that the two perform the identical function in

substantially the same way, with substantially the same result.” Id.

When considering the scope of “the functional statement in a means-plus-

function limitation, [the Court] must take great care not to impermissibly limit the

function by adopting a function different from that explicitly recited in the claim.”

Omega Eng’g, Inc, v. Raytek Corp., 334 F.3d 1314, 1322 (Fed. Cir. 2003) (quotations

omitted). But, as with any claim, scope may be limited “if the intrinsic evidence

shows that the patentee distinguished [a] term from prior art on the basis of a

particular embodiment, expressly disclaimed subject matter, or described a

particular embodiment as important to the invention.” CCS Fitness, Inc. v.

Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002). Relatedly, “express

disclaimer or independent lexicography in the written description” may “justify

adding [a] negative limitation” to the claim scope. Omega Eng’g, 334 F.3d at 1323.

In the Claim Construction Order, this Court ruled that § 112, ¶ 6 applies to

“attachment structure configured to mount and secure the edge portions of the

enclosure member along the support tubes” in Claim 20.41 Specifically, as shown

in the specification, the “attachment structure” is achieved “by combining a sleeve

portion 21 of the fabric member 2, a positioning post 22, an upright tube 11 with

single slit 112, a receiving hole 111, a first wall part 114, a second wall part 115, and

38 MSJ Reply 3:8-9.

39 That is, a Person of Ordinary Skill in the Art.

40 Id. at 4:2-4 (footnote added).

41 Claim Construction Order 3:15-23; see also id. at 25:8-27:21.

-14-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 15of31 Page ID

#:26951

a top open end 113.” The function of the attachment structure is to “mount and

secure the edge portions of the enclosure member along the support tubes.”

11 "s

2 =

‘ ——. □□□ 2.

‘ > aes _

\ APN TBH

| NY \J

| i / L

(CDK

\

ee \ □□

SZ

u— a 1141 ” /

“a” J

FIG. 5 (Amended)

The parties dispute whether the rivets permanently attaching the fabric

enclosure to the upright tubes in the accused products can be a § 112, 7 6

equivalent under this construction. In applying the function-way-result test, the

Court considers the ’919 Patent’s teaching concerning screws—e.g., if screws are

impermissible, using screws or another type of external fastener such as a rivet at

least cannot perform the same function in the same way.

The patent criticized prior art baby cribs that used screws to secure the fabric

enclosure sleeves to the upright tubes because doing so created three problems:

(1) assembly with screws was time consuming; (2) “a hole is formed in the

enclosure 35 member 9 [by the screw] such that when the enclosure member 9 is

stretched, the enclosure member 9 is likely to tear at the periphery of the hole”;

2 See id.

Sa.

-15-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 16 of 31 Page ID

#:26952

and (3) “the outer appearance of the aforesaid baby crib is adversely affected since

the screw 82 is visible from the exterior of the bed frame structure 8.” **

Wonderland’s expert opines that having the “upright tube, positioning post

attached to an interior facing wall of the upright tube with fasteners, and sleeve

portion of the fabric/enclosure member” of the accused products is “an

insubstantial change from the structure construed by the Court” because the

structure in the accused products “‘simply moves the positioning post from the

inside of the upright tube, and secures them with fasteners to an interior facing wall

of the upright tube, which is an insubstantial difference.” * He opines that this

change is insubstantial because “the positioning posts are still secured to an inside

of the upright tube allowing the exterior surface of the upright tubes to be exposed

without screws or fasteners visible from the outside of the tubes, and also allows for

the frame structure and enclosure member to be assembled separately and then

brought together.” “°

’ _

ial y wa i

i i

ua 7

“4 ’919 Patent 1:31-40; see also id. at 1:43-46 (same objects of invention); id. at

2:3-5 (Figure 2 depicts a criticized prior art baby crib using screws); 7d. at 3:11-18

(citing no need for screws and benefits thereof); zd. at 3:43-46 (same).

4S Myers Report, Ex. G 594-95.

46 Id.

-16-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 17 of 31 Page ID

#:26953

Although Wonderland has provided some evidence to controvert whether

that configuration addresses easy assembly and outward appearance—and

therefore it may not be inconsistent with what is claimed—the rivets are

permanently inserted through a hole in the fabric member. Wonderland argues

that its expert opined that the accused products do not “stretch[] the fabric over

the outside of the tubes and pierc[e] it with a fastener in a manner that creates a

risk of the fabric tearing,”47 but the Court has reviewed the Myers Report,

including the portions cited by Wonderland, and it provides no such opinion.48

Assuming, as Wonderland does, that the ’919 Patent “disclaims only the

prior art approach of stretching the fabric tightly over the outside of the upright

tubes and holding it in place with screws visible from the outside of the playard,

which created a risk of tearing and detracted from the appearance of the playard,”

Wonderland has presented no evidence that using rivets through the fabric would

avoid the risk of tearing based upon placing the rivets on the inward-facing side of

the upright tube’s exterior.49 Thus, even assuming that rivets could constitute a

§ 112, ¶ 6 equivalent, Wonderland has provided no evidence to support the

contention that the actual rivets used in the accused products meet the test to be an

equivalent under Claim 20.

Specifically, Wonderland does not dispute that the ’919 Patent criticizes and

even disclaims the use of screws that risk tearing the fabric. But Wonderland

admits that the accused products use rivets through the fabric, and it provides no

evidence to support the contention that that use does not risk tearing around the

rivet holes as disclaimed in the patent. In view of the patent’s clarity regarding use

of screws,50 the Court finds that, by using rivets to pierce the fabric, the accused

products fail to achieve the function of mounting and securing the edge portions of

47 MSJ Opposition 8:2-8.

48 See, e.g., Myers Report, Ex. G 594-95 (without mentioning likelihood of

tearing at piercing point, addressing only outer appearance and ease of assembly:

the interior rivets are “an insubstantial change because in this configuration the

positioning posts are still secured to an inside of the upright tube allowing the

exterior surface of the upright tubes to be exposed without screws or fasteners

visible from the outside of the tubes, and also allows for the frame structure and

enclosure member to be assembled separately and then brought together”).

49 MSJ Opposition 6:7-10.

50 See, e.g., supra n.44 (collecting citations in the ’919 Patent criticizing use of

screws); see also Order on Def. Mot. to Strike Pl. Infringement Contentions [ECF

No. 301] 15:8-23 (explaining exclusion of external fasteners in Claim 20).

-17-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 18 of 31 Page ID

#:26954

the fabric enclosure along the support tubes in the same way as set forth in

Claim 20. This finding is consistent with the Court’s Claim Construction Order; it

provides no new claim construction. Accordingly, no reasonable jury would

conclude that the accused products qualify as an equivalent attachment structure

under the Court’s construction.

Because the Court finds no disputed issue of material fact concerning that

aspect of Claim 20, the Court declines to reach the parties’ alternative arguments.

Accordingly, the Court GRANTS Baby Trend’s Motion for no infringement

of Claim 20 and its dependent Claims 27 and 28.

2. Original Patent Requirement

Baby Trend moves for summary judgment that Claims 1-29 of the

’919 Patent are “invalid for violating the original patent requirement set forth in 35

U.S.C. § 251.”51

a. Legal Framework

To obtain summary judgment of invalidity, a moving party must overcome

the statutory presumption that issued patent claims are valid. See 35 U.S.C. § 282.

That statute mandates that “[a] patent shall be presumed valid” and that “[t]he

burden of establishing invalidity of a patent or any claim thereof shall rest on the

party asserting such invalidity.” Id.

One basis for potential invalidity arises under 35 U.S.C. § 251. Under that

statute, if a “patentee claim[s] more or less than [s]he had a right to claim in [a]

patent,” the patentee may ask the PTO to “reissue the patent for the invention

disclosed in the original patent, and in accordance with a new and amended

application, for the unexpired part of the term of the original patent.” 35 U.S.C.

§ 251(a). But “[n]o new matter shall be introduced into the application for

reissue.” Id. Rather, the reissue patent must cover the “same invention.” Id. To

satisfy the original patent requirement, “the original patent ‘must clearly and

unequivocally disclose the newly claimed invention [in the reissued patent] as a

separate invention.’” Forum US, Inc. v. Flow Valve, LLC, 926 F.3d 1346, 1352

(Fed. Cir. 2019) (quoting Antares Pharma, Inc. v. Medac Pharma Inc., 771 F.3d 1354

51 Baby Trend MSJ 1:6-8.

-18-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 19 of 31 Page ID

#:26955

(Fed. Cir. 2014)). “Whether new claims in a reissue patent comply with 35 U.S.C.

§ 251 is a question of law[.]” Id. at 1350-51.

“[A] reissue claim is for the ‘same invention’ if the original patent

specification fully describes the [now-]claimed inventions, but not if the broader

claims ‘[were] [ ] merely suggested or indicated in the original specification.’”

Antares, 771 F.3d at 1359 (quoting U.S. Industrial Chemicals, Inc. v. Carbide &

Carbon Chemicals Corp., 315 U.S. 668, 676 (1942)); see also id. at 1362 (“the

specification must clearly and unequivocally disclose the newly claimed invention

as a separate invention”). Reissued claims are invalid where “original claims are

significantly different in scope and coverage than the [reissued] claims” and the

reissued claims do not contain a limitation found in the original claims. Id.

“To be sure, the original patent requirement focuses on the original

specification rather than the original claims.” Id. That is because, “by definition[,]

in reissue the original claims do not disclose the invention claimed on reissue.

Thus, [courts] must look to the specification.” Id. If “[t]he original specification

[] does not adequately disclose the later-claimed [] features to meet the Industrial

Chemicals standard,” then the reissued claims are invalid for failing the original

patent/same invention requirement. Id. at 1362-63 (holding reissue claims invalid

where specification disclosed “a particular class of jet injectors” but new claims

were directed to combination of safety features without jet injector limitation).

b. Analysis

Baby Trend argues that the ’919 Patent is “a broadening reissue patent of

U.S. Patent No. 6,859,957 (the ‘’957 Patent’).”52 Baby Trend contends that the

original ’957 Patent relates to an easily assembled baby crib using a “Clamped/Slit

connection” wherein the “fabric member is clamped between each of the upright

tubes and a corresponding one of the positioning posts, and extends outward

through the slit in each of the upright tubes.”53 Although the ’957 and ’919 Patents

are very similar, Baby Trend argues that the ’919 Patent is broader in “two notable

ways.”54 First, the inventor “added to the written description of the ’919 Patent to

describe an ‘exposed’ tube playard,” and, second, he “modified original

52 Id. at 18:7-8.

53 Id. at 18:23-20:6.

54 Id. at 20:21-23.

-19-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 20 of 31 Page ID

#:26956

independent claim 1 and added new claims 8–29, of which claims 8, 15 and 20 are

independent.”55 Each of the new claims “include[d] a new limitation reciting an

‘exposed’ tube look.”56 Further, new Claims 8 and 15 omitted the Clamped/Slit

Connection from the ’957 Patent.57 Based upon those alleged changes, Baby Trend

argues that Claims 1, 8, 15, and 20 (and all of their respective dependent claims)

“violate the original patent requirement.”58

Wonderland responds that Baby Trend’s analysis fails to compare the new

claims of the ’919 Patent to the original specification of the ’957 Patent.59 When

the new claims are properly compared to the original specification, with respect to

Claims 1 and 20 Wonderland argues that “the supposedly ‘new’ limitation about

which Baby Trend complains—‘the outwardly facing surface of each of the upright

tubes is exposed on an outside of the enclosure member’—is in fact expressly

disclosed in the ’957 Patent.”60 Wonderland asserts that the specification

“expressly disclosed that [feature] in the preferred embodiment illustrated in

Figures 4 and 5.”61 Additionally, the original specification criticized stretching the

fabric over the upright tubes and noted that the new approach would improve the

outward appearance.62 Turning to Claims 8 and 15, Wonderland argues that,

comparing the new claim language with the original specification, “the recited

limitations regarding how the enclosure member interacts with the upright posts,

with the positioning posts being ‘lodged’ inside the upright tubes, are expressly

disclosed as a feature of the invention described in the ’957 Patent.”63

In reply, Baby Trend maintains that Wonderland “errantly cast[s] the § 251

framework as nothing more than the § 112 written description requirement” and

ignores relevant authority.64

55 Id. at 20:24-21:1.

56 Id. at 21:1-2.

57 Id. at 21:2-13.

58 Id. at 21:22-22:7.

59 MSJ Opposition 10:12-18 & 11:15-16.

60 Id. at 11:17-20.

61 Id. at 11:21-25.

62 Id. at 11:25-12:1.

63 Id. at 12:14-18.

64 MSJ Reply 7:6-8; see also id. at 7:9-8:9.

-20-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 21 of 31 Page ID

#:26957

To resolve this dispute, the Court examines the two purported differences

raised by Baby Trend:

’957 Patent (Original) ’919 Patent (Reissue)

Focused on clamp/slit Not limited to

connection clamp/slit connection

Not focused on exposed Focused on exposed

tubes tubes

Specifically, the Court examines whether the relevant reissued claim limitations—

such as “outer tube wall defining an outer contour shape of an upright tube” with

an “outwardly facing surface” and the fabric enclosure placed between the upright

tubes such that “the outwardly facing surface of each of the upright tubes is

exposed on an outside of the enclosed space”—are “clearly and unequivocally

disclosed” in the ’957 Patent’s specification, or, rather, whether the specification

“merely suggest[s] or indicate[s] the [exposed tubes] invention recited in the

reissue claims.”65 Forum US, 926 F.3d at 1351-52.

Like the ’919 Patent, the ’957 Patent is directed to a “baby crib” with

upright tubes that each has a receiving hole for a positioning post, with the fabric

enclosure “clamped between each upright tube and a corresponding positioning

post, and extend[ing] outward through the slit in each upright tube.”66 The

’957 Patent included the same criticism of the prior art’s use of screws and offered

a solution with a more “appealing appearance.”67

That is, in the preferred embodiment, “[d]uring assembly, the fabric

member 2 is directly mounted on the bed frame structure 1 by inserting the

positioning posts 22 respectively into the receiving holes 111 in the upright tubes 11

65 Compare ’919 Patent, Claim 1 (italicized language in claim added to reissue

patent).

66 ’957 Patent at Abstract [ECF No. 307-8].

67 Id. at 1:42.

-21-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 22 of 31 Page ID

#:26958

through the top open ends 113.”68 “Since the fabric member 2 is clamped between

each of the upright tubes 11 and a corresponding one of the positioning posts 22,

the fabric member 2 can be positioned fixedly on the bed frame structure 1 without

the need for screws.”69

Further, the specification teaches that, “[a]s such, not only is the assembly

operation of the baby crib of the present invention quick, the outer appearance of

the baby crib is enhanced as well since there are no screws visible from the exterior

of the bed frame structure 1.”70 Adding a cap to the top of each upright tube

“further enhance[d] the outer appearance of the baby crib.”71 The specification

explained that “it is apparent that through the presence of the receiving holes 111

in the upright tubes 11,” and by connecting the fabric enclosure to the upright

tubes via the positioning post sleeved into the corners of the fabric enclosure,

“screws are not required to position the fabric member 2 on the bed frame

structure 1.”72 That configuration allowed for easy assembly, no risk of tearing the

fabric at the screw insertion point, and an enhanced appearance.73

The specification depicted the preferred embodiment through several

figures:

68 Id. at 2:42-46.

69 Id. at 2:65-3:1.

70 Id. at 3:1-5.

71 Id. at 3:6-11.

72 Id. at 3:24-31.

73 Id. at 3:31-35.

-22-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 23 of 31 Page ID

#:26959

ry o (

Ty

XZ □ |

2 Cr fi ir

er “2a We Pie)

Hy} 22clld/i i

| SS, □ ‘ fe i

i\ LE |e ft i

PSS Oe be

22 |} Se 3 Ii | \

NS ! i ll ( 4 \

HL I — \ 0 \

| cee \ Ses

Ie yee yf

II ‘

i LL \

FIG. 3 SL i,

(1 of 2) FIG. 4

□

FIG. ; an expo Podiccene, “FIG. 4 is a fragmentary schematic

baby ° c evdine ociment Of a | view of the preferred embodiment,

paby cr accor Ing to the present illustrating how a fabric member is

Invention positioned on a bed frame structure”

. 115

113 at

1152

113 7) us 110

112 | | Wie FES 1151

han | \ 22 YES SOP 9

Hy £113 \ i | eee

1 | VN pKa,

! ! 0 Ke Yi \

11-7 YOsHh 112 ye

\\ | i 114 OEY is □

pe Ee wl 21 1141

U FIG. 3 FIG 5

(2 of 2) “FIG. 5 is a sectional view of the

preferred embodiment taken along

line V-V of FIG. 4.”

-23-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 24 of 31 Page ID

#:26960

Based upon a review of those figures, the Court concludes that, although the

specification suggests or indicates exposed tubes as a byproduct of the clamped/slit

connection, it does not clearly and unequivocally disclose the outer tube wall and

its outwardly facing surface separate from the depicted clamped/slit connection.

That is, the specification teaches that the clamped/slit connection allows for easy

assembly and no risk of tearing from screws, resulting in a more appealing

appearance (no visible screws); however, exposed tubes are not clearly and

unequivocally claimed as a separate invention. Although the outer tube wall is

described in the specification in connection with a new way to mount the fabric

enclosure, this description depends on the clamp/slit connection for mounting, and

it is not described as a separate inventive aspect of the new baby crib.

This conclusion is supported by Figures 3, 4, and 5, which do not identify

exposed tubes as an independent component.74 Although these figures may suggest

exposed tubes, a mere suggestion is insufficient to meet the original patent

requirement. Rather, clear and unequivocal disclosure as a separate invention is

required. Forum US, 926 F.3d at 1351-52.

Further, a comparison of the original claims and the reissue claims shows

that the ’919 Patent omitted the described connection between the fabric enclosure

and the upright tubes, which relates to the incidental disclosure of the exposed

tubes in the specification:

74 See, e.g., ’957 Patent at Figs. 3, 4, & 5 (“22” represents a plurality of

positioning posts and “11” represents upright tubes; no mention of exposed

tubes); see also id. at Fig. 5 (“1152” represents a remaining part of the upright tube

wall and “115” represents the second wall part of the upright tube wall; no mention

of exposed tubes).

-24-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 25 of 31 Page ID

#:26961

’957 Patent (Original) ’919 Patent (Reissue)

Claim 1: “a plurality of Claim 8: “a plurality of Claim 15: “a plurality

positioning posts positioning posts of positioning posts

mounted on said fabric provided on the provided on the

member and inserted enclosure member at enclosure member at

respectively into said locations corresponding locations

receiving holes in said to the upright tubes, corresponding to the

upright tubes, said fabric wherein the positioning edge portions of the

member being clamped posts are configured to enclosure member,

between each of said lodge into the receiving wherein the positioning

upright tubes and a holes of the upright tubes posts are lodged inside

corresponding one of said for supporting the enclosure the upright tubes, the

positioning posts and member between the side panels extending

extending outward upright tubes, whereby between the upright

through said slit in each the enclosure member tubes”

of said upright tubes.” extends from one upright

tube generally in

directions of other of the

upright tubes”

The use of “lodge” and “lodged” in the reissue claims appears to be a

broader variation of “clamped,” but broadening the claimed connection would

disregard the examiner’s explanation for allowing the claims: the prior art did not

teach a clamped/slit connection and the new invention did.75 Thus, the Court

concludes that Baby Trend has demonstrated by clear and convincing evidence that

the specification does not clearly and unequivocally teach exposed tubes as a

separate invention. “The task is essentially one of claim construction” viewed

against the specification, Varian Semiconductor Equip. Assocs., Inc. v. Axcelis Techs.,

Inc., 2009 WL 189960, at *22 (D. Mass. Jan. 21, 2009), and when that task is

completed here, the specification lacks the requisite clear and unequivocal support.

75 See JSUF ¶ 502 (undisputed); Joint Exhibit Part N [ECF No. 307-8] 3971,

¶ 1 (Reasons for Allowance) (the invention discloses “a fabric member being

clamped between a plurality of positioning posts”) (emphasis in original).

-25-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 26 of 31 Page ID

#:26962

Thus, the ’919 Patent is invalid for failing to comply with the original patent

requirement and the Court GRANTS Baby Trend’s Motion on that ground.76

3. Absolute Intervening Rights

Baby Trend moves for summary judgment that it is “entitled to absolute

intervening rights for certain accused products in existence” before the ’919 Patent

issued,” and, thus, “those products are exempt from liability.”77

a. Legal Framework

Under the intervening rights doctrine, if “the claims of [an] original and [a]

reissued patent[] are substantially identical,” then the reissued patent “shall

constitute a continuation thereof and have effect continuously from the date of the

original patent.” 35 U.S.C. § 252.

If, however, prior to the grant of the reissued patent, a person imported into

the United States “anything patented by the reissued patent,” then that person

may continue to sell “the specific thing” so imported unless doing so “infringes a

valid claim of the reissued patent which was [also] in the original patent.” Id.

“Once a determination is made that the claims are not ‘identical’ within the

meaning of the first paragraph of section 252, the defense of intervening rights

under the second paragraph of section 252 can be raised.” Westvaco Corp. v. Int’l

Paper Co., 991 F.2d 735, 742 (Fed. Cir. 1993).

The term “specific thing” refers to the tangible article that qualifies for

absolute intervening rights. Such “specific things made before the date of reissue,

which infringe the new reissue claims, are absolutely free of the reissued patent and

may be used or sold after the date of reissue without regard to the patent.” BIC

Leisure Prods. v. Windsurfing Int’l, Inc., 1 F.3d 1214, 1220-21 (Fed. Cir. 1993).

Thus, “[b]ecause of the activity prior to reexamination, an infringer might enjoy an

intervening right to ‘continue what would otherwise be[come] infringing activity’

after reexamination.” Univ. Va. Patent Found. v. General Elec. Co., 792 F. Supp.

76 Some of Baby Trend’s arguments pertain to infringement, not to the original

patent requirement. Baby Trend did not seek construction of “lodged” or any

other terms relating to how the fabric member is held by each upright tube or

connected to the other upright tubes. To the extent that Baby Trend is raising an

implicit claim construction issue as it relates to infringement, the Court declines to

entertain further claim construction at this late stage of the case.

77 Baby Trend MSJ 1:8-10.

-26-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 27 of 31 Page ID

#:26963

904, 912 (W.D. Va. 2011) (quoting Seattle Box Co. v. Indus. Crating & Packing, Inc.,

756 F.2d 1574, 1579 (Fed. Cir. 1985)).78

b. Analysis

Baby Trend argues that nine models of Category 1 and 2 products are subject

to absolute intervening rights because they were in the U.S. before January 15,

2013—the date that the ’919 Patent issued as a reissue from the ’957 Patent.79

Baby Trend contends that “there is no genuine dispute of material fact that the

’919 Patent claims substantively changed from the ’957 Patent claims because of

patent prosecution and the Nine Models existed in the U.S. before January 15,

2013,” so summary judgment is appropriate.80 Baby Trend avers that its expert

explained why the reissue amendments were substantive and that Wonderland’s

expert did not challenge that opinion.81 Based upon internal company records that

its expert analyzed, Baby Tend provides an inventory chart alleging how many

units were already in the U.S. as of the relevant reissue date.82 Baby Trend

observes that Wonderland’s damages expert does not contest Baby Trend’s

intervening rights analysis, but, rather, Wonderland “speculates that the

information on which [Baby Trend’s expert] relies is not true and accurate.”83

Wonderland challenges Baby Trend’s inventory reports, arguing that

Baby Trend improperly “relies on an alleged snapshot of its U.S. inventory on the

day before the ’919 Patent issued that was generated six months ago, for purposes

of this litigation.”84 Wonderland argues that Baby Trend’s data is “inherently

suspect,” based upon “manual ‘adjustments’ to its inventory counts over the

years.”85 Wonderland asserts that Baby Trend’s expert performed an unreliable

78 In this context. reissue and reexamination are used interchangeably. See 35

U.S.C. § 307(b) (making 35 U.S.C. § 252 covering intervening rights applicable to

reexamined patents).

79 Baby Trend MSJ 29:5-17.

80 Id. at 29:20-23.

81 Id. at 30:12-22.

82 Id. at 31:1-25.

83 Id. at 33:20-21.

84 MSJ Opposition 14:12-14; see also id. at 16:15-16 (challenging authenticity of

“the one-page Inventory Valuation report generated in September 2021 for

purposes of this litigation”).

85 Id. at 14:14-16.

-27-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 28 of 31 Page ID

#:26964

analysis by using purchasing information derived from “reports reflecting data that

he assumed had been somehow input [in]to Baby Trend’s financial systems at

some unknown time in the past.”86 Wonderland’s expert opines that it is

“impossible to verify the accuracy” of that data due to lack of records and

numerous discrepancies.87 Wonderland also argues there are no records

concerning when the products were imported into the U.S.88 Moreover, because

the reliability of the inventory data turns on the credibility of Baby Trend’s Vice

President—with whom Baby Trend’s expert discussed the inventory system—

Wonderland argues that this issue is improper for resolution on summary

judgment.89

Baby Trend replies that Wonderland’s expert cannot create a controverted

issue of material fact because he “cites no objective evidence that contradicts any

fact on which Baby Trend relies.”90 Baby Trend also argues that Wonderland’s

expert “lacks the skill, experience, training, or education to testify on this issue.”91

In any event, Baby Trend observes that Wonderland’s expert relies on sales data

generated from the same accounting system in calculating damages, yet that same

expert finds the inventory data from that system unreliable for the purpose of

evaluating intervening rights.92 Baby Trend also argues that import records are

unnecessary because they would be cumulative of the data already provided.93

Finally, Baby Trend contends that Wonderland failed to question Baby Trend’s

Vice President on those topics during his deposition, so his sworn declaration

remains unrebutted.94

i. Substantially Identical

As an initial matter, the Court observes that Wonderland does not dispute

whether the claims in the reissued patent—the ’919 Patent—are different (i.e., not

86 Id. at 15:11-12.

87 Id. at 15:16-17.

88 Id. at 15:18-23.

89 Id. at 18:22-24.

90 MSJ Reply 10:26-27.

91 Id. at 10:27-11:1.

92 Id. at 11:11-14 & n.8.

93 Id. at 12:11-12.

94 Id. at 12:3-4 & 12:18-20.

-28-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 29 of 31 Page ID

#:26965

substantially identical) than the claims in the original ’957 Patent. Accordingly, to

the extent that Baby Trend can prove that it had the specific accused products in

inventory on the date of reissue (i.e., January 15, 2013), Baby Trend’s intervening

rights would preclude liability.

ii. Category 1 Products

Wonderland does not dispute that, by the end of 2011, Baby Trend stopped

purchasing (i.e., importing for sale) Category 1 products.95 Although Wonderland

argues that Baby Trend continued selling those products after the end of 2011, the

intervening rights doctrine examines the inventory on hand as of the relevant

reissue date, not the date of the last sale of such a product. Wonderland’s expert

acknowledged that by the end of 2011, Baby Trend no longer made, purchased, or

imported Category 1 models.96 Wonderland offers no basis on which to dispute

that assertion as adopted by its own expert. Further, Baby Trend’s general ledger

confirms that the relevant inventory was kept in the U.S., as opposed to stored

abroad.97

Because “the end of 2011” occurred before the reissue date of January 15,

2013, the relevant Category 1 products are subject to Baby Trend’s intervening

rights. Whether Baby Trend sold, lost, or destroyed those units sometime after

January 15, 2013, is irrelevant because Baby Trend had purchased them no later

than the end of 2011. There is also no evidence to suggest that Baby Trend stored

Category 1 inventory outside of the U.S. until some later date.98 Thus, the Court

declines Wonderland’s invitation to allow any factual disputes arising from a battle

of the experts over Category 2 inventory to infect its Category 1 analysis. Those

95 See JSUF ¶ 316.

96 See Expert Report of Bryan Van Uden (the “Van Uden Report”) [ECF

No. 326-2], Joint Ex. Part A (sealed portion) at Joint Exhibit 0312-0313, pp. 14-15

(¶ 31) (“Baby Trend ‘continued selling the leftover inventory of playard products

having the connection mechanism shown and charted in Wonderland’s Category 1,

[but] did not purchase any additional inventory of Wonderland’s Category 1 after

2011.”).

97 See Joint Exhibit Part J [ECF No. 326-11] at 3283-3315; see also Defendant’s

Dispositive Motion Hearing Slides (sealed) [ECF No. 407] at Slide 88 (inventory

summary chart compiling data).

98 See, e.g., Declaration of Bradley Mattarocci [ECF No. 326-12], Joint Ex.

Part S (sealed portion) at Joint Exhibit 5021, ¶ 3 (noting records showing location,

receive by date, etc.) & ¶ 7 (noting recording products “stored as inventory in

Baby Trend’s warehouses in the United States”).

-29-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 30 of 31 Page ID

#:26966

categories involve different products that were acquired and sold during different

time periods relevant to intervening rights.

Because Wonderland’s evidentiary challenges to Baby Trend’s inventory

business records pertain to the specific units that Baby Trend had on hand, and

Wonderland does not challenge the undisputed fact concerning when Baby Trend

stopped purchasing Category 1 products (i.e., the end of 2011), any disputes

relating to specific product records are not material. Accordingly, the Court

GRANTS summary judgment on Baby Trend’s intervening rights defense with

respect to Category 1 products.

iii. Category 2 Products

Because the Court has granted Baby Trend’s motion for summary judgment

of non-infringement with respect to Category 2 products, as well as invalidity for

violating the original patent requirement, the Court need not reach intervening

rights with respect to Category 2 products. Because the Court does not reach

intervening rights concerning Category 2 products, the Court DENIES as moot

Baby Trend’s Daubert motion challenging Van Uden’s rebuttal analysis.

V. CONCLUSION

For the foregoing reasons, the Court hereby ORDERS as follows:

1. Wonderland’s motion for partial summary judgment is GRANTED.

2. Baby Trend’s summary judgment motion is GRANTED with respect

to intervening rights for Category 1 products. The motion is GRANTED with

respect to non-infringement of Category 2 products and Categories 3-6 products.

The motion is GRANTED with respect to invalidity under the original patent

requirement.

3. Baby Trend’s Daubert motion challenging the rebuttal opinions of

Van Uden is DENIED as moot.

-30-

Case 5:14-cv-01153-JWH-SP Document 412 Filed 02/13/23 Page 31 of31 Page ID

#:26967

4. Baby Trend is DIRECTED to lodge, no later than February 24, 2023,

a proposed Judgment consistent with this Order.

IT IS SO ORDERED.

Dated: February 13, 2023 VA

{2 n WSHolcom

NITED STATES DISTRICT JUDGE

-31-