James Davidson Enterprises LLC v. Bolt Star LLC

1

2

3

4

5

6

7

8 UNITED STATES DISTRICT COURT

9 FOR THE EASTERN DISTRICT OF CALIFORNIA

10

11 James Davidson Enterprises, LLC, No. 2:21-cv-01091-KJM-DB

12 Plaintiff, ORDER

13 v.

14 | Bolt Star, LLC,

1S Defendant.

16

17 Plaintiff James Davidson Enterprises, LLC sues defendant Bolt Star, LLC alleging

18 | defendant’s “Bolt Star templates” product infringes James Davidson’s patent. Bolt Star has

19 | moved for partial summary judgment of non-infringement. On May 12, 2022, the court

20 | conducted a hearing in accordance with Markman v. Westview Instruments, Inc., 517 U.S. 370

21 | (1996). Douglas Sorocco and Evan Talley appeared for James Davidson, and Nathan Brunette

22 | and Thomas Wood appeared for Bolt Star. In this order, based on the entirety of the record

23 | before it, the court construes “integrally formed body,” the disputed phrase found in each of the

24 | independent claims of the patent-in-suit, U.S. Patent No. 7,984,541 (the °541 Patent).

25 For the reasons below, the court denies defendant’s partial motion for summary

26 | judgment and adopts the court’s own construction of “integrally formed body” in ’541.

1 I. BACKGROUND

2 James Davidson filed the ‘541 Patent in 2005 and the United States Patent and Trademark

3 Office (PTO) approved the patent in mid-2011. Compl. Ex. A (Patent No. 7,984,541, or ’541

4 patent), ECF No. 1-2. The patented device “relates generally to devices for supporting anchor

5 bolts in concrete and . . . to templates for supporting such bolts in a cardboard mold while the

6 concrete inside hardens.” Id. at 5.1 The device “comprises an integrally formed body sized for

7 placement over the open top of the mold . . . .” Id. Mr. Davidson named the device the Bolt-X®

8 template.2 Mr. Davidson did not provide a special definition for the term “integrally formed

9 body” in the patent claim specification. See generally id.; Opp’n at 13. The contested Bolt Star

10 devices “consist of five separate plastic components (a central hub and four legs) that are molded

11 as separate pieces, sold in a bag of parts, and then later assembled together into a template for the

12 placement of anchor bolts in concrete footing and other foundations.” Def.’s Mot. for Partial

13 Summ. J. of Non-Infringement (MSJ) at 6, ECF No. 23. “The hub and arms cannot be used

14 separately and must be assembled for the Bolt Star Product to perform its intended purpose of

15 serving as a template to hold anchor bolts, namely by press-fitting a clip on each arm onto a

16 bracket on the hub and then securing each arm to the hub with a bolt.” Id. at 19.

17 James Davidson filed the complaint in June 2021, claiming defendant’s “Bolt Star

18 templates” infringe plaintiff’s ’541 Patent. Compl. ¶¶ 37–77, ECF No. 1. Plaintiff alleges the

19 Bolt Star template meets “each and every limitation of at least Claims 7, 13, 16, and 18 of the

20 ’541 Patent,” id. ¶¶ 38, 41, and therefore Bolt Star is liable for patent infringement under

21 35 U.S.C. § 271(a),3 id. ¶ 6. Plaintiff also claims Bolt Star is liable for inducement to infringe the

1 When citing page numbers on filings, the court uses the pagination automatically

generated by the CM/ECF system.

2 Plaintiff also alleges defendant infringed its Bolt-X trademark under 15 U.S.C.

§ 1114(1), but these and other non-patent infringement claims are not at issue in this partial

motion for summary judgement. See Compl. ¶¶ 78–102.

3 “Except as otherwise provided in this title, whoever without authority makes, uses,

offers to sell, or sells any patented invention, within the United States or imports into the United

States any patented invention during the term of the patent therefor, infringes the patent.”

35 U.S.C. § 271(a).

1 ’541 patent and contributory infringement of the ’541 patent. Id. ¶¶ 53–77. Bolt Star moves for

2 summary judgment on plaintiff’s patent infringement claims, arguing its product “does not

3 infringe the ’541 Patent as a matter of law because it does not have an ‘integrally formed body’ as

4 each and every claim of the ’541 Patent requires.” MSJ at 6. The parties have not engaged in any

5 discovery or taken any depositions. The matter is fully briefed. See Opp’n, ECF No. 24; Reply,

6 ECF No. 26.

7 The court now construes the disputed phrase, “integrally formed body,” found in claims 1,

8 7, 13, 16, and 18 of the ’541 Patent. See generally ’541 patent.

9 II. LEGAL STANDARD

10 A. Summary Judgment

11 Summary judgment is appropriate if “there is no genuine dispute as to any material fact

12 and the movant is entitled to judgment as a matter of law.” Fed. R. Civ. P. 56(a). A dispute is

13 “genuine” if “a reasonable jury could return a verdict for the nonmoving party.” Anderson v.

14 Liberty Lobby, Inc., 477 U.S. 242, 248 (1986). A fact is “material” if it “might affect the outcome

15 of the suit under the governing law.” Id.

16 The party moving for summary judgment must first show no material fact is in dispute.

17 Celotex Corp. v. Catrett, 477 U.S. 317, 325 (1986). It can do so by showing the record

18 establishes facts beyond genuine dispute, or it can show the adverse party “cannot produce

19 admissible evidence to support the fact.” Fed. R. Civ. P. 56(c)(1). The nonmoving must then

20 “establish that there is a genuine issue of material fact.” Matsushita Elec. Indus. Co. v. Zenith

21 Radio Corp., 475 U.S. 574, 585 (1986). Both must cite “particular parts of materials in the

22 record.” Fed. R. Civ. P. 56(c)(1). The court views the record in the light most favorable to the

23 non-moving party and draws reasonable inferences in that party’s favor. Matsushita, 475 U.S. at

24 587–88; Adickes v. S.H. Kress & Co., 398 U.S. 144, 157 (1970).

25 B. Claim Construction Generally

26 The purpose of claim construction is to “determin[e] the meaning and scope of the patent

27 claims asserted to be infringed.” Markman v. Westview Instruments, Inc., 52 F.3d 967, 976

28 (Fed. Cir. 1995) (en banc). “When the parties raise an actual dispute regarding the proper scope

1 of these claims, the court, not the jury, must resolve that dispute.” O2 Micro Int’l Ltd. v. Beyond

2 Innovation Tech. Co., 521 F.3d 1351, 1360 (Fed. Cir. 2008). Terms contained in claims are

3 “generally given their ordinary and customary meaning.” Vitronics Corp. v. Conceptronic, Inc.,

4 90 F.3d 1576, 1582 (Fed. Cir. 1996). In construing a patent claim, a court starts with the intrinsic

5 evidence of record, consisting of the claim language, the patent specification, and the prosecution

6 history. Phillips v. AWH Corp., 415 F.3d 1303, 1313–14 (Fed. Cir. 2005) (en banc).

7 “The appropriate starting point . . . is always with the language of the asserted claim

8 itself.” Comark Communications, Inc. v. Harris Corp., 156 F.3d 1182, 1186 (Fed. Cir. 1998).

9 “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have

10 to a person of ordinary skill in the art in question at the time of the invention . . . .” Phillips, 415

11 F.3d at 1312. “There are only two exceptions to this general rule: 1) when a patentee sets out a

12 definition and acts as his own lexicographer, or 2) when the patentee disavows the full scope of a

13 claim term either in the specification or during prosecution.” Thorner v. Sony Computer Entm’t

14 Am. LLC, 669 F.3d 1362, 1365 (Fed. Cir. 2012).

15 “[T]he person of ordinary skill in the art is deemed to read the claim term not only in the

16 context of the particular claim in which the disputed term appears, but in the context of the entire

17 patent, including the specification.” Phillips, 415 F.3d at 1313. The specification “is always

18 highly relevant” and “[u]sually . . . dispositive; it is the single best guide to the meaning of a

19 disputed term.” Vitronics, 90 F.3d at 1582. “However, claims are not to be interpreted by adding

20 limitations appearing only in the specification.” Id. If in evidence, the court may also consider

21 the patent’s prosecution history before the U.S. PTO, which “can often inform the meaning of the

22 claim language by demonstrating how the inventor understood the invention and whether the

23 inventor limited the invention in the course of prosecution, making the claim scope narrower than

24 it would otherwise be.” Phillips, 415 F.3d at 1317.

25 “[O]n occasion, it is appropriate to rely on extrinsic evidence regarding the relevant

26 scientific principles, the meaning of technical terms, and the state of the art at the time the patent

27 issued.” Am. Honda Motor Co. v. Coast Distribution Sys., Inc., 609 F. Supp. 2d 1032, 1036

1 (N.D. Cal. 2009) (citations omitted). However, all extrinsic evidence should be evaluated in light

2 of the intrinsic evidence. Phillips, 415 F.3d at 1319.

3 III. ANALYSIS

4 A. Claim Construction

5 The parties dispute the term “integrally formed body,” which implicates independent

6 claims 1, 7, 13, 16, and 18 of the ’541 patent. To resolve this dispute, the court considers the

7 claim language and the patent specification before addressing the prosecution history.4

8 1. Claim Language and Patent Specification

9 “Claim language generally carries the ordinary meaning of the words in their normal

10 usage in the field of the invention.” Invitrogen Corp. v. Biocrest Mfg., L.P., 327 F.3d 1364, 1367

11 (Fed. Cir. 2003). “In some cases, the ordinary meaning of claim language . . . may be readily

12 apparent even to lay judges, and claim construction in such cases involves little more than the

13 application of the widely accepted meaning of commonly understood words.” Phillips, 415 F.3d

14 at 1314. “However, in many cases, the meaning of a claim term as understood by persons of skill

15 in the art is not readily apparent.” O2 Micro Int’l Ltd., 521 F.3d at 1360.

16 Here, the parties dispute the plain meaning of “integrally formed body” as used in claims

17 1, 7, 13, 16 and 18. See generally MSJ; Opp’n. All five claims describe the Bolt-X as a

18 template comprising: an integrally formed body sized for placement

19 over the open top of the mold, the body having an upper surface

20 and a lower surface,

21 but claims 16 and 18 addend the following language, respectively:

22 wherein the body is formed by a hub and a plurality of arms

23 extending radially from the hub, wherein each arm is generally C-

24 shaped forming a spine with opposing depending edges . . . (claim

25 16)

26 and

27 /////

4 At hearing on the motion, both parties agreed the intrinsic record was dispositive.

Because the court finds the same, it does not consider extrinsic evidence.

1 wherein the body is formed by a hub and at least three arms

2 extending radially from the hub . . . (claim 18).

3 ’541 patent, col. 4, ll. 53–56; id., col. 5, ll. 41–44; id., col. 6, ll. 18–20, 58–65; id., col. 7, ll. 26–

4 30. In Mr. Davidson’s detailed description of the preferred embodiment, he concluded, “Changes

5 can be made in the combination and arrangement of the various parts and elements described

6 herein without departing from the spirit and scope of the invention as defined in the following

7 claims.” Id., col. 4, ll. 39–42.

8 James Davidson’s proposed construction for the phrase “integrally formed body” is “one

9 or more components in a fixed relationship.” Opp’n at 9. While Mr. Davidson did not define

10 “integrally formed body” in his patent specification, see generally ’541 patent, his construction

11 would encompass Bolt Star’s product, which consists of discrete parts that the user “must”

12 assemble, i.e., fix together, MSJ at 18–19. Bolt Star disagrees, arguing an “integrally formed

13 body” requires a “single unitary structure, not an assembly of separate components.” Reply at 6.

14 Accordingly, Bolt Star argues, its product is distinguishable from prior art.

15 Neither party suggests there is a an agreed-upon “normal usage in the field of the

16 invention” of “integrally formed body,” see generally, MSJ; Opp’n, and a quick review of case

17 law indicates “integrally formed,” or variations thereof, is an oft-contested term.5 Indeed, even

5 See, e.g., Fontem Ventures, B.V. v. NJOY, Inc., No. 14-1645, 2015 WL 12766460, at *21

(C.D. Cal. Jan. 29, 2015) (construing “integrally formed” as “formed by parts that make up a

whole,” not “made of one piece”); Richmond v. Forever Gifts, Inc., No. 14-0583, 2015 WL

3421370, at *15 (N.D. Tex. May 27, 2015) (finding “integrally formed” to mean “made as a

single unit,” not “made functionally inseparable”); Eli Lilly & Co. v. Perrigo Co., No. 113-851,

2015 WL 13648576, at *8–9 (S.D. Ind. Apr. 13, 2015) (construing “a flexible membrane

integrally forming a base and a wall” as “forming a base and wall from a single piece of

material”); STX, LLC v. Epoch Lacrosse, LLC, No. 14-3511, 2015 WL 4885534, at *8 (D. Md.

Aug. 14, 2015) (“integrally formed” is defined as “When formed, it is integral,” not “formed in

the same process and of the same material”); Storus Corp. v. Restoration Hardware, Inc., No. 6-

2454, 2007 WL 902553, at *1 (N.D. Cal. Mar. 22, 2007) (“ ‘Integrally formed’ and ‘formed

integrally’ are construed as ‘formed with material common to the rest of the unit, and the

connection having no mechanical joints.’”); Burns, Morris & Stewart Ltd. P’ship v. Masonite

Int’l Corp., 401 F. Supp. 2d 692, 701 (E.D. Tex. 2005) (holding “integrally formed” does not

require “permanence,” nor that item is “incapable of being easily dismantled,” but means

“connected together so as to make up a single complete piece or unit, in such a way that the

connection becomes part of, or is interconnected with, the piece or unit, as by gluing, an

interconnecting joint, or internal screws. The connector is not merely attached to, or wrapped

around, the outside surface of the piece or unit.”).

1 the Federal Circuit has found “integral” to have no clear, settled definition; it may cover “more

2 tha[n] a unitary construction,” In re Morris, 127 F.3d 1048, 1055 (Fed. Cir. 1997), but may also

3 be equivalent to “one-piece,” Rexnord Corp. v. Laitram Corp., 274 F.3d 1336, 1341, 1344–45

4 (Fed. Cir. 2001) (distinguishing “two-piece structure” from “an ‘integral’ structure”); see also

5 Advanced Cardiovascular Sys. v. Scimed Life Sys., 887 F.2d 1070, 1074 (Fed. Cir.

6 1989) (“integral” not limited to mean “of one-piece” construction). Because there is no “express

7 definition in [Mr. Davidson’s] specification,” the claim terms here must be construed in the

8 context of the entire patent. In re Morris, 127 F.3d at 1056.

9 The court finds the context of the patent cuts against Bolt Star’s construction for at least

10 two reasons. First, “[c]laims must be interpreted with an eye toward giving effect to all terms in

11 the claim.” Becton, Dickinson & Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249, 1257 (Fed.

12 Cir. 2010) (internal quotations omitted). Claims 16 and 18 both reference either “a plurality of”

13 or “at least three” arms “extending radially from the [Bolt-X] hub.” ’541 patent, col. 6, ll. 60–63;

14 id. col. 5, ll. 30. Coupled with Mr. Davidson’s statement that “[c]hanges can be made in the

15 combination and arrangement of the various parts and elements described herein without

16 departing from the spirit and scope of the invention,” id., col. 4, ll. 39–42, the court finds the ‘541

17 Patent’s use of “integrally formed body” does not preclude James Davidson from, for example,

18 affixing an additional arm to the template.

19 Second, courts disfavor “[u]nnecessary language” that “may inject ambiguity in the

20 [c]ourt’s construction or invite the trier of fact to interpret the court’s construction, thus defeating

21 the purpose of claim construction.” Diamond Coating Techs., LLC v. Hyundai Motor Am., No.

22 13-1480, 2014 WL 5698445, at *11 (C.D. Cal. Aug. 25, 2014). If the court were to accept Bolt

23 Star’s argument, that an “integrally formed body” requires a “single unitary structure,” it would

24 inject unnecessary language and ambiguity into construction of the disputed term. See Opp’n

25 at 9. The court declines to adopt this proposed construction, given the term “unitary” does not

26 appear in the claims, the specification, or even in the prosecution history of the ‘541 patent. Id.

1 Having considered the claim language, and because there is no definition of “integrally

2 formed body” in the claim specification, the court next considers whether Mr. Davidson

3 disavowed “the full scope of a claim term . . . during prosecution.” Thorner, 669 F.3d at 1365.

4 2. Prosecution History

5 “[A] claim receives the meaning it would have to persons in the field of the invention,

6 when read and understood in light of the entire specification and prosecution history.” Fenner

7 Invs., Ltd. v. Cellco P’ship, 778 F.3d 1320, 1323 (Fed. Cir. 2015). The prosecution history of a

8 patent limits the interpretation of claim terms by excluding any interpretation that the applicant

9 disclaimed during prosecution. See Southwall Technologies, Inc. v. Cardinal IG Co., 54 F.3d

10 1570, 1576 (Fed. Cir. 1995). This allows “[t]he interested public . . . the right to rely on the

11 inventor’s statements made during prosecution, without attempting to decipher whether the

12 examiner relied on them, or how much weight they were given.” Fenner Invs., Ltd., 778 F.3d at

13 1325. However, “[t]o balance the importance of public notice and the right of patentees to seek

14 broad patent coverage, [courts have] consistently rejected prosecution statements too vague or

15 ambiguous to qualify as a disavowal of claim scope.” Omega Eng'g, Inc, v. Raytek Corp.,

16 334 F.3d 1314, 1325 (Fed. Cir. 2003). Accordingly, the applicant “must clearly and

17 unambiguously express any such surrender of subject matter during prosecution.” Invitrogen

18 Corp., 327 F.3d at 1367 (citations omitted). “There is no ‘clear and unmistakable’ disclaimer if a

19 prosecution argument is subject to more than one reasonable interpretation, one of which is

20 consistent with a proffered meaning of the disputed term.” SanDisk Corp. v. Memorex Prods.,

21 Inc., 415 F.3d 1278, 1287 (Fed. Cir. 2005). Finally, “an applicant’s argument that a prior art

22 reference is distinguishable on a particular ground can serve as a disclaimer of claim scope even

23 if the applicant distinguishes the reference on other grounds as well.” Am. Piledriving Equip.,

24 Inc. v. Geoquip, Inc., 637 F.3d 1324, 1336 (Fed. Cir. 2011) (quoting Andersen Corp. v. Fiber

25 Composites, LLC, 474 F.3d 1361, 1374 (Fed. Cir. 2007)).

26 Bolt Star argues, during prosecution of the patent, James Davidson distinguished three

27 prior art references—“Greenwood,” “Hulse,” and “Hendrix”—cited by the patent examiner “on

28 grounds including that their multi-component body structures were not an ‘integrally formed

1 body.’” MSJ at 13–14; Brunette Decl. Ex. 3 (Appellant’s Brief), ECF No. 23-1. Bolt Star claims

2 this distinguishing estops James Davidson from arguing that the Bolt Star template constitutes an

3 integrally formed body. MSJ at 14. James Davidson disagrees, noting the Patent Appeals

4 Board’s decision to reverse its initial rejection of Mr. Davidson’s claim was not based on the term

5 “integrally formed body.” Opp’n at 19. Furthermore, James Davidson argues, the prosecution

6 history affirms for the public that devices “formed of multiple parts” and assembled into a “single

7 piece” constitute “integrally formed” bodies. Id. at 20.

8 The question here is whether James Davidson is estopped from arguing the Bolt Star is an

9 integrally formed body because of “clear and unmistakable” arguments Mr. Davidson advanced

10 during prosecution as to why Greenwood, Hulse, and Hendrix were not integrally formed bodies.

11 SanDisk Corp., 415 F.3d at 1287.

12 During claim prosecution, Mr. Davidson first addressed Greenwood, an apparatus to

13 facilitate the “electrical interconnection of flat multiconductor cable” under carpets. Brunette

14 Decl. Ex. 5 at 76. Mr. Davidson wrote, in relevant part, “The cable guides 194 and 196 in

15 Greenwood are integrally formed with the base 192 and are structurally separate from the plate

16 176. Assuming, without admitting, that the combined base 192 and plate 176 formed notches as

17 recited in claim 1, this combination is not integrally formed and therefore does not anticipate

18 claim 1.” Id. Ex. 3 at 32. Bolt Star argues the public would read this and understand

19 Mr. Davidson to be claiming Greenwood was not integrally formed because its body was

20 composed of separate parts. Defs.’ Supp. Brief at 5, ECF No. 37. While the court agrees Bolt

21 Star’s reading is one “reasonable interpretation,” SanDisk Corp., 415 F.3d at 1287, it is not the

22 only one. Indeed, Mr. Davidson’s use of “this combination” is vague, as it could also refer to the

23 provision of Greenwood’s patent discussing a pin, which “may be fixedly secured to guide 196 to

24 serve as a pivot for movement of plate 176 into operative position . . . .” Brunette Decl. Ex. 5 at

25 78. Accordingly, this statement does not qualify as a disavowal of the definition plaintiff urges

26 now.

27 Turning to Hulse, a device for marking cheese, see id. Ex. 6 at 82, Mr. Davidson said,

28 “Because the template body of claim 14 is ‘integrally formed’ the novelty rejection based on

1 Hulse et al. must fail. The device in Hulse et al. has several cooperating but structurally separate

2 parts. For example, the arms E and c slide in the guide-ways b and D, and the guide-ways rotate

3 on the ring C relative to the disk A. For this reason alone, Hulse et al. does not anticipate claim

4 14.” Id. Ex. 3 at 38. Again, it is not entirely clear Mr. Davidson argued Hulse was not an

5 integrally formed body because it was made of several pieces, or because when assembled and in

6 use, the separate pieces were movable. Both readings are reasonable.

7 Finally, Mr. Davidson argued Hendrix, a center locating device, see id. Ex. 7 at 85, “does

8 not show an integrally formed body with arms extending radially from a hub, as recited in claim

9 14. Because the template body of claim 14 is ‘integrally formed,’ Hendrix does not anticipate

10 claim 14. The device in Hendrix is basically a carpenter’s tape with four tapes all coiled on the

11 same reel mechanism. The arms and hub in Hendrix clearly are not integrally formed as recited

12 in claim 14.” Id. Ex. 3 at 42. Despite his use of the word “clearly,” id., Mr. Davidson’s

13 distinction is, at best, ambiguous—the public could understand him to be saying Hendrix’s device

14 is not integrally formed because the reel mechanism is made of different material than the

15 carpenter’s tape, or because the tapes are movable. For this reason, he did not disavow the

16 construction he urges now.

17 Bolt Star argues this case is on all fours with American Piledriving, supra. MSJ at 17; see

18 also Reply at 8. In that case, the Federal Circuit relied on claim differentiation and prosecution

19 history in finding the term “integral” meant formed or cast of one piece. This court finds

20 American Piledriving distinguishable for two reasons. First, the court in that case considered two

21 claims, one of which recited “an eccentric weight portion connected to said cylindrical gear

22 portion,” and the second of which depended on the first but recited “said eccentric weight portion

23 is integral with said cylindrical gear portion.” Am. Piledriving, 637 F.3d at 1335 (emphases in

24 original). Because the claims described “the same relationship using different terms, the [correct]

25 assumption is that the term in the dependent claim has a narrower scope.” Id. Here, “integrally

26 formed body” is not dependent upon a different, broader claim term. See generally ’541 patent.

27 Second, during reexamination, American Piledriving distinguished the prior art reference by

28 arguing the “two components are ‘integral’—i.e., they are simply components of the ‘one-piece’

1 counterweight.” Am. Piledriving, 637 F.3d at 1336. Accordingly, American Piledriving “clearly

2 and unmistakably” disavowed the construction of “integral” it urged on appeal. Id. In contrast,

3 Mr. Davidson did not use the term “single piece” or the equivalent during prosecution. Instead,

4 he relied on vague and somewhat conclusory statements to explain why Greenwood, Hulse, and

5 Hendrix were not integrally formed bodies.

6 For these reasons, relying on both the claims and on Mr. Davidson’s statements during

7 claim prosecution, the court concludes Mr. Davidson’s use of “integrally formed body” does not

8 preclude him from arguing Bolt Star’s template infringed on the ’541 Patent. Accordingly, it

9 does not grant partial summary judgment on these grounds.6

10 3. Construction of “Integrally Formed Body”

11 Before construing the term “integrally formed body” based on the patent specifications

12 and prosecution history, the court observes the ’541 patent also mentions “integrally formed” in

13 the patent abstract, while bearing in mind that Bolt Star challenges the term “integrally formed

14 body,” not “integrally formed.” ’541 patent at 1. The abstract is a concise summary of the

15 invention. The ’541 patent abstract provides, in pertinent part, “The template is integrally formed

16 of plastic or some other resilient, light weight material.” Id. This sentence suggests the template

17 must be cast or comprised of one material. However, the Patent and Trademark Office has

18 published a rule providing that the abstract of the patent “shall not be used for interpreting the

19 scope of the claims.” See 37 C.F.R. § 1.72(b). Nonetheless, courts may “look[ ] to the abstract to

20 determine the scope of the invention.” Hill–Rom Co., Inc. v. Kinetic Concepts, Inc., 209 F.3d

21 1337, 1341 n.*7 (Fed. Cir. 2000) (collecting cases).

22 Here, in light of the claim language, patent specification, prosecution history, and abstract,

23 the court construes “integrally formed body” in ’541 to mean “one or more components of the

24 same material in a fixed relationship.”

6 Because the court does not find partial summary judgment appropriate based on claim

construction, it need not consider plaintiff’s alternative argument regarding the doctrine of

equivalents.

7 There is only one footnote in the Hill-Rom case, and it is designated in the original with

an asterisk.

1} IV. CONCLUSION

2 For the above reasons, the court denies defendant’s motion for partial summary

3 | judgment of non-infringement and construes “integrally formed body” to mean “one or

4 | more components of the same material in a fixed relationship.”

5 A status conference is set for February 23, 2023 at 2:30 PM. The parties are directed

6 | to submit a joint status report seven days before the status conference, advising the court of

7 | their positions regarding a schedule for the case going forward.

8 This order resolves ECF No. 23.

9 IT IS SO ORDERED.

10 | DATED: January 24, 2023.

11

CHIEF ED STATES DISTRICT JUDGE