Section 350.700 Adoption of Federal Standards

IllinoisRegulations

Ask Donna

How this section applies to your facts.

Illinois Administrative Code › Title 56 › › Part 3500 › Section 350.700 Adoption of Federal Standards

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

TITLE 56: LABOR AND EMPLOYMENT

CHAPTER I: DEPARTMENT OF LABOR

SUBCHAPTER b: REGULATION OF WORKING CONDITIONS

PART 350 HEALTH AND SAFETY

SECTION 350.700 ADOPTION OF FEDERAL STANDARDS

Section 350.700  Adoption of Federal Standards

a)         State

Standards and Rulemaking.  Section 25 of the Act outlines the Director's

authority to promulgate, amend and revoke State standards.  Any promulgation, amendment

or revocation of State standards will be done in accordance with the Illinois

Administrative Procedure Act [5 ILCS 100].

b)         Incorporation

of Federal Regulations

1)         Pursuant

to Section 25 of the Act, the Department hereby incorporates by reference designated

federal occupational safety and health standards which the United States

Secretary of Labor has promulgated or modified in accordance with the federal

Occupational Safety and Health Act of 1970 (29 U.S.C. 651) and that are in

effect on January 1, 2015, unless an alternate State standard has been adopted

and is listed in subsection (c).  These designated standards are located at 29

CFR 1908, 1910, 1915, 1926 and 1977.  All materials incorporated by this

Section are incorporated as of the date specified and do not include any later

amendments or editions.

2)         Pursuant

to Section 25 of the Act, all amendments, after January 1, 2015, to the federal

occupational safety and health standards in subsection (1)

shall become

rules of the Department within 6 months after their federal promulgation date,

unless:

A)        There is a current

alternate State standard in effect; or

B)        Within

45 calendar days of the federal promulgation date, the State files first notice

with the Secretary of State to amend section (c) with an alternate State standard.

(Sec. 25(b) of the Act)

c)         Incorporation

of Interpretations of Federal Regulations

1)         The

following interpretations of 29 CFR 1910.134, Respiratory Protection Standard

e State standard in effect; or

B)        Within

45 calendar days of the federal promulgation date, the State files first notice

with the Secretary of State to amend section (c) with an alternate State standard.

(Sec. 25(b) of the Act)

c)         Incorporation

of Interpretations of Federal Regulations

1)         The

following interpretations of 29 CFR 1910.134, Respiratory Protection Standard

(1998) are incorporated into this Part. Copies of the federal Occupational

Safety and Health Administration material may also be obtained at https://www.osha.gov/respiratory-protection.

Preamble:  Respiratory Protection;

Final Rule, 63 Fed. Reg. 1152 (Jan. 8, 1998)

Questions & Answers on the

Respiratory Protection Standard, OSHA Memorandum (Aug. 17, 1998)

Inspection Procedure for the

Respiratory Protection Standard, CPL 2-0.120 (Sept. 18, 1998)

Small Entity Compliance Guide for

the Revised Respiratory Protection Standard, OSHA Directorate of Health

Standards Programs (Sept. 30, 1998)

2)         The

following interpretation of 29 CFR 1910 and 1926, Standards Improvement

(Miscellaneous Changes) for General Industry and Construction Standards;

Paperwork Collection for Coke Oven Emissions and Inorganic Arsenic (1998); 29

CFR 1915 and 1926, Occupational Exposure to Asbestos (1998); 29 CFR 1910,

Methylene Chloride (1998); 29 CFR 1910, Permit-Required Confined Spaces (1998);

and 29 CFR 1910, 1915, 1917, 1918 and 1926, Powered Industrial Truck Operator

Training (1999) are incorporated into this Part.  Copies are available at the

Department's Chicago office.  Copies may also be obtained at https://www.osha.gov/laws-regs/federalregister/publicationdate.

Preamble: Standards Improvement

(Miscellaneous Changes) for General Industry and Construction Standards;

Paperwork Collection for Coke Oven Emissions and Inorganic Arsenic; Final Rule,

63 Fed. Reg. 33450 (June 18, 1998)

Preamble:  Occupational Exposure

to Asbestos; 63 Fed. Reg. 35137 (June 29, 1998)

Preamble: Methylene Chloride;

Final Rule, 63 Fed. Reg

ws-regs/federalregister/publicationdate.

Preamble: Standards Improvement

(Miscellaneous Changes) for General Industry and Construction Standards;

Paperwork Collection for Coke Oven Emissions and Inorganic Arsenic; Final Rule,

63 Fed. Reg. 33450 (June 18, 1998)

Preamble:  Occupational Exposure

to Asbestos; 63 Fed. Reg. 35137 (June 29, 1998)

Preamble: Methylene Chloride;

Final Rule, 63 Fed. Reg. 50711 (Sept. 22, 1998)

Preamble: Permit-Required Confined

Spaces; Final Rule, 63 Fed. Reg. 66018 (Dec. 1, 1998)

Preamble: Powered Industrial Truck

Operator Training; Final Rule, 63 Fed. Reg. 66238 (Dec. 1, 1998)

3)         The

following interpretation of 29 CFR 1910, Dipping and Coating Operations (1999)

is incorporated into this Part. Copies are available at the Department's

Chicago office. Copies may also be obtained at https://www.osha.gov/laws-regs/federalregister/publicationdate.

Preamble: Dipping and Coating

Operations; Final Rule, 64 Fed. Reg. 13897 (Mar. 23, 1999)

4)         The

following interpretation of 29 CFR 1926, Safety Standards for Steel Erection

(2001), and 29 CFR 1910, Occupational Exposure to Bloodborne Pathogens;

Needlesticks and Other Sharps Injuries (2001), are incorporated into this Part.

Copies are available at the Department's Chicago office.  Copies may also be

obtained at https://www.osha.gov/laws-regs/federalregister/publicationdate.

Preamble:  Safety Standards for

Steel Erection; Final Rule, 66 Fed. Reg. 5196 (Jan. 18, 2001)

Preamble:  Occupational Exposure

to Bloodborne Pathogens; Needlesticks and Other Sharps Injuries; Final Rule, 66

Fed. Reg. 5318 (Jan. 18, 2001)

5)         The

following interpretation of 29 CFR 1910.36, 1910.37, 1910.38 and 1910.39, Exit

Routes, Emergency Action Plans and Fire Prevention Plans, Final Rule (Nov. 11,

2002); 29 CFR 1910.139, Termination of Rulemaking Respiratory Protection for M.

Tuberculosis, Final Rule (Dec. 31, 2003); 29 CFR 1915.52, Fire Protection in

Shipyard Employment, Final Rule (Sept

. Reg. 5318 (Jan. 18, 2001)

5)         The

following interpretation of 29 CFR 1910.36, 1910.37, 1910.38 and 1910.39, Exit

Routes, Emergency Action Plans and Fire Prevention Plans, Final Rule (Nov. 11,

2002); 29 CFR 1910.139, Termination of Rulemaking Respiratory Protection for M.

Tuberculosis, Final Rule (Dec. 31, 2003); 29 CFR 1915.52, Fire Protection in

Shipyard Employment, Final Rule (Sept. 15, 2004); and 29 CFR 1910 et al.,

Standards Improvement Project – Phase II (Jan. 5, 2005) are incorporated into

this Part.  Copies are available at any of the Department's offices.  Copies

may also be obtained at http://www.osha.gov.

6)         The

following interpretations of 29 CFR 1910, 1915 and 1926, Assigned Protection

Factors, Final Rule (Aug. 24, 2006);  29 CFR 1926, Roll-Over Protective

Structure, Final Rule (Dec. 29, 2005, corrected July 20, 2006);  29 CFR

1910.1026, Occupational Exposure to Hexavalent Chromium, Final Rule (Feb. 28,

2006, corrected June 23, 2006); 29 CFR 1926, Steel Erection:  Slip Resistance

of Skeletal Structural Steel, Final Rule (Jan. 18, 2006);  29 CFR 1910, 1915

and 1926, Electrical Installation Requirements, subpart S, Final Rule (Feb. 14,

2007, corrected Oct. 29, 2008);  29 CFR 1915, Updating National Consensus

Standards in OSHA Standard for Fire Protection in Shipyard Employment, Final

Rule (Jan. 3, 2007); 29 CFR 1910, Employer Payment for Personal Protective

Equipment, Final Rule (Nov. 15, 2007, clarified Dec. 12, 2008); and 29 CFR

1910, Updating OSHA Standards Based on National Consensus Standards, Final Rule

(Mar. 14, 2008, Dec. 14, 2007, Sept. 9, 2009) are incorporated into this Part.  Copies

are available at any of the Department's offices, on the Department website at www.state.il.us/agency/idol

or the OSHA website at http://www.osha.gov.

7)         The

following interpretations of 29 CFR 1910, 1915 and 1926 as appropriate,

Standards Improvement Project, Phase III (June 8, 2011); Cranes and Derricks in

Construction (Aug

07, Sept. 9, 2009) are incorporated into this Part.  Copies

are available at any of the Department's offices, on the Department website at www.state.il.us/agency/idol

or the OSHA website at http://www.osha.gov.

7)         The

following interpretations of 29 CFR 1910, 1915 and 1926 as appropriate,

Standards Improvement Project, Phase III (June 8, 2011); Cranes and Derricks in

Construction (Aug. 9, 2010); Technical Amendment concerning Safety Standards

for Steel Erection (May 17, 2010); 29 CFR Revising the Notification

Requirements in the Exposure Determination Provisions of the Hexavalent

Chromium Standards (May 14, 2010); Revising Standards Referenced in the

Acetylene Standard (Nov. 10, 2009);

d)         Clarification

of Effective Dates

The effective dates for 29 CFR

1910.119(e)(1)(i), (ii), (iii), and (iv), which establish timelines for hazard

analyses for hazardous materials, are 1, 2, 3 and 4 years, respectively, after

August 1, 1994.

e)         Conformity

with Federal Regulations

The Department shall consider any

subsequent amendments to the health and safety standards adopted by the federal

Occupational Safety and Health Administration.  Those amendments will be incorporated

by reference or substitute provisions that provide equivalent protection will

be adopted.  Amendments will be adopted in accordance with the Illinois Administrative

Procedure Act.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.