Section 720.111 References

IllinoisRegulations

Ask Donna

How this section applies to your facts.

Illinois Administrative Code › Title 35 ENVIRONMENTAL PROTECTION › CHAPTER I: POLLUTION CONTROL BOARD › Part 720 HAZARDOUS WASTE MANAGEMENT SYSTEM: GENERAL › Section 720.111 References

This text was captured on Aug 14, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

Section 720

Section 720.111  References

The following documents are

incorporated by reference for the purposes of this Part and 35 Ill. Adm. Code

702 through 705, 721 through 728, 730, 733, 738, and 739:

a)         Non-Regulatory Government Publications and Publications of

Recognized Organizations and Associations:

ACGME.  Available from the

Accreditation Council for Graduate Medical Education, 401 North Michigan Avenue,

Suite 2000, Chicago, IL  60611, 312-755-5000, www.acgme.org:

"Accreditation Council for

Graduate Medical Education:  Glossary of Terms", March 19, 2009,

referenced in 35 Ill. Adm. Code 722.300.

BOARD NOTE:  Also available on the

Internet for download and viewing as a PDF file at the following Internet

address:  www.acgme.org/Portals/0/PDFs/ab_ACGMEglossary.pdf.

ACI.

Available from the American Concrete Institute, 38800 Country Club Dr.,

Farmington Hills, MI  48331-3439:

ACI 318-83:  "Building Code Requirements for Reinforced Concrete",

adopted November 1983, referenced in 35 Ill. Adm. Code 724.673 and 725.543.

ANSI.

Available from the American National Standards Institute, 1899 L Street, N.W.,

11

th

Floor, Washington, DC  20036, 202-293-8020.  www.ansi.org:

See

ASME/ANSI B31.3 and B31.4 and supplements below in this subsection (a) under

ASME.

API.

Available from the American Petroleum Institute, 1220 L Street, Northwest,

Washington, DC  20005, (855) 999-9870, www.api.org:

"Cathodic Protection of

Underground Petroleum Storage Tanks and Piping Systems", API Recommended

Practice 1632, Second Edition, December 1987, referenced in 35 Ill. Adm. Code

724.292, 724.295, 725.292, and 725.295.

"Evaporative Loss from External Floating-Roof Tanks", API publication

2517, Third Edition, February 1989, USEPA-approved for 35 Ill. Adm. Code 721.983

and 725.984.

"Guide

for Inspection of Refinery Equipment", Chapter XIII, "Atmospheric and

Low Pressure Storage Tanks", 4

th

Edition, 1981, reaffirmed

December 1987, referenced in 35 Ill. Adm

l. Adm. Code

724.292, 724.295, 725.292, and 725.295.

"Evaporative Loss from External Floating-Roof Tanks", API publication

2517, Third Edition, February 1989, USEPA-approved for 35 Ill. Adm. Code 721.983

and 725.984.

"Guide

for Inspection of Refinery Equipment", Chapter XIII, "Atmospheric and

Low Pressure Storage Tanks", 4

th

Edition, 1981, reaffirmed

December 1987, referenced in 35 Ill. Adm. Code 721.291, 724.291, 724.293,

725.291, and 725.292.

"Installation of Underground Petroleum Storage Systems", API

Recommended Practice 1615, Fourth Edition, November 1987, referenced in 35 Ill.

Adm. Code 724.292.

ASME.

Available from the American Society of Mechanical Engineers, Two Park Avenue,

New York, NY  10016-5990, 800-843-2763, https://www.asme.org:

"Chemical

Plant and Petroleum Refinery Piping", ASME/ANSI B31.3-1987, as

supplemented by B31.3a-1988 and B31.3b-1988, referenced in 35 Ill. Adm. Code

724.292 and 725.292. Also available from ANSI.

"Liquid

Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous

Ammonia, and Alcohols", ASME/ANSI B31.4-1986, as supplemented by

B31.4a-1987, referenced in 35 Ill. Adm. Code 724.292 and 725.292.  Also

available from ANSI.

ASTM

International.  Available from ASTM International, 100 Barr Harbor Drive, P.O.

Box C700, West Conshohocken, PA  19428-2959, 877-909-ASTM or 610-832-9500,

www.astm.org:

ASTM C 94-90, "Standard

Specification for Ready-Mixed Concrete", approved March 30, 1990,

referenced in 35 Ill. Adm. Code 724.673 and 725.543.

ASTM D 88-87, "Standard

Test Method for Saybolt Viscosity", approved April 24, 1981, reapproved

January 1987, referenced in 35 Ill. Adm. Code 726.200.

ASTM D 93-80, "Standard

Test Methods for Flash Point by Pensky-Martens Closed Cup Tester",

approved 1980, USEPA-approved for 35 Ill. Adm. Code 721.121.

ASTM D 140-70,

"Standard Practice for Sampling Bituminous Materials", approved 1970,

referenced in Appendix A to 35 Ill. Adm. Code 721

ybolt Viscosity", approved April 24, 1981, reapproved

January 1987, referenced in 35 Ill. Adm. Code 726.200.

ASTM D 93-80, "Standard

Test Methods for Flash Point by Pensky-Martens Closed Cup Tester",

approved 1980, USEPA-approved for 35 Ill. Adm. Code 721.121.

ASTM D 140-70,

"Standard Practice for Sampling Bituminous Materials", approved 1970,

referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 346-75,

"Standard Practice for Collection and Preparation of Coke Samples for

Laboratory Analysis", approved 1975, referenced in Appendix A to 35 Ill.

Adm. Code 721.

ASTM D 420-69,

"Guide to Site Characterization for Engineering, Design, and Construction

Purposes", approved 1969, referenced in Appendix A to 35 Ill. Adm. Code

721.

ASTM D 1452-65,

"Standard Practice for Soil Investigation and Sampling by Auger Borings",

approved 1965, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D

1946-90, "Standard Practice for Analysis of Reformed Gas by Gas Chromatography",

approved March 30, 1990, USEPA-approved for 35 Ill. Adm. Code 724.933 and

725.933.

ASTM D

2161-87, "Standard Practice for Conversion of Kinematic Viscosity to

Saybolt Universal or to Saybolt Furol Viscosity", March 27, 1987,

referenced in 35 Ill. Adm. Code 726.200.

ASTM D 2234-76,

"Standard Practice for Collection of a Gross Sample of Coal",

approved 1976, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D

2267-88, "Standard Test Method for Aromatics in Light Naphthas and Aviation

Gasolines by Gas Chromatography", approved November 17, 1988,

USEPA-approved for 35 Ill. Adm. Code 721.963 and 724.963.

ASTM D

2382-88, "Standard Test Method for Heat of Combustion of Hydrocarbon Fuels

by Bomb Calorimeter (High Precision Method)", approved October 31, 1988,

USEPA-approved for 35 Ill. Adm. Code 724.933 and 725.933.

ASTM D

2879-92, "Standard Test Method for Vapor Pressure-Temperature Relationship

and Initial Decomposition Temperature of Liquids by Isoteniscope",

approved 1992, USEPA-approved for 35 Ill. Adm

88, "Standard Test Method for Heat of Combustion of Hydrocarbon Fuels

by Bomb Calorimeter (High Precision Method)", approved October 31, 1988,

USEPA-approved for 35 Ill. Adm. Code 724.933 and 725.933.

ASTM D

2879-92, "Standard Test Method for Vapor Pressure-Temperature Relationship

and Initial Decomposition Temperature of Liquids by Isoteniscope",

approved 1992, USEPA-approved for 35 Ill. Adm. Code 725.984, referenced in 35

Ill. Adm. Code 721.963, 724.963, and 725.963.

ASTM D

3828-87, "Standard Test Methods for Flash Point of Liquids by Setaflash

Closed Tester", approved December 14, 1988, USEPA-approved for 35 Ill. Adm.

Code 721.121(a).

ASTM D 3828-97, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 1997, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-98, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 1998, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-02, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2002, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-05, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2005, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-07, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2007, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-07a, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2007, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-09, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2009, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-12, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2012, USEPA-approved for 35 Ill. Adm. Code 721.121(a)

losed Tester",

approved 2007, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-09, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2009, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-12, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2012, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-12a, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2012, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16a, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16a, "Standard

Test Methods for Flash Point of Liquids by Setaflash Closed Tester",

approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 8174-18, "Standard

Test Methods for Finite Flash Point Determination of Liquid Wastes by

Small-Scale Closed Cup Tester", approved 2018, USEPA-approved for 35 Ill.

Adm. Code 721.121(a).

ASTM D 8175-18, "Standard

Test Methods for Finite Flash Point Determination of Liquid Wastes by

Pensky-Martens Closed Cup Tester", approved 2018, USEPA-approved for 35

Ill. Adm. Code 721.121(a).

ASTM E 168-88,

"Standard Practices for General Techniques of Infrared Quantitative

Analysis", approved May 27, 1988, USEPA-approved for 35 Ill. Adm. Code 721.963

and 724.963.

ASTM E 169-87,

"Standard Practices for General Techniques of Ultraviolet-Visible

Quantitative Analysis", approved February 1, 1987, USEPA-approved for 35

Ill. Adm. Code 721.963 and 724.963.

ASTM E 260-85,

"Standard Practice for Packed Column Gas Chromatography", approved

June 28, 1985, USEPA-approved for 35 Ill. Adm. Code 724.963

988, USEPA-approved for 35 Ill. Adm. Code 721.963

and 724.963.

ASTM E 169-87,

"Standard Practices for General Techniques of Ultraviolet-Visible

Quantitative Analysis", approved February 1, 1987, USEPA-approved for 35

Ill. Adm. Code 721.963 and 724.963.

ASTM E 260-85,

"Standard Practice for Packed Column Gas Chromatography", approved

June 28, 1985, USEPA-approved for 35 Ill. Adm. Code 724.963.

ASTM E 681-85, "Standard Practice

for Concentration Limits of Flammability of Chemicals (Vapors and Gases)",

approved 1985, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-98, "Standard

Practice for Concentration Limits of Flammability of Chemicals (Vapors and

Gases)", approved 1998, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-01, "Standard

Practice for Concentration Limits of Flammability of Chemicals (Vapors and

Gases)", approved 2001, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-04, "Standard

Practice for Concentration Limits of Flammability of Chemicals (Vapors and

Gases)", approved 2004, reapproved 2015, USEPA-approved for 35 Ill. Adm.

Code 721.121(a).

ASTM E 681-09, "Standard

Practice for Concentration Limits of Flammability of Chemicals (Vapors and

Gases)", approved 1009, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-09(2015), "Standard

Practice for Concentration Limits of Flammability of Chemicals (Vapors and

Gases)", approved 1009, reapproved 2015, USEPA-approved for 35 Ill. Adm.

Code 721.121(a).

ASTM G 21-70

(1984a), "Standard Practice for Determining Resistance of Synthetic

Polymer Materials to Fungi", approved 1970 referenced in 35 Ill. Adm. Code

724.414 and 725.414.

ASTM G 22-76

(1984b), "Standard Practice for Determining Resistance of Plastics to

Bacteria", referenced in 35 Ill. Adm. Code 724.414 and 725.414.

GPO.

Available from the Superintendent of Documents, U.S

721.121(a).

ASTM G 21-70

(1984a), "Standard Practice for Determining Resistance of Synthetic

Polymer Materials to Fungi", approved 1970 referenced in 35 Ill. Adm. Code

724.414 and 725.414.

ASTM G 22-76

(1984b), "Standard Practice for Determining Resistance of Plastics to

Bacteria", referenced in 35 Ill. Adm. Code 724.414 and 725.414.

GPO.

Available from the Superintendent of Documents, U.S. Government Publishing

Office, 732 Capitol Street, N.W., Washington, DC  20401-0001, 202-512-1800,

www.gpo.gov:

Standard

Industrial Classification Manual (1987), referenced in 35 Ill. Adm. Code

702.110 and Section 720.110.

"Test

Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication

number EPA-530/SW-846 (Third Edition, November 1986), as amended by Updates I

(July 1992), II (November 1994), IIA (August 1993), IIB (January 1995), III

(December 1996), IIIA (April 1998), and IIIB (November 2004) (document number

955-001-00000-1).  See below in this subsection (a) under NTIS.

ISO.

Available from the International Organization for Standardization, BIBC II,

Chemin de Blandonnet 8, CP 401, 1214 Vernier, Geneva, Switzerland (phone:  +41

22 749 01 11; www.iso.org/store.html):

International Standard ISO

3166-1:2013,

"Codes for the representation of

names of countries and their subdivisions − Part 1:  Country code",

Third edition (2013)

, referenced in 35 Ill. Adm. Code 722.183 and 722.184.

Latest Board search for updated version:  July 2020.

BOARD NOTE:

ISO maintains a web page with a free on-line list of country codes accessible

at www.iso.org/obp/ui/#search.

NACE.

Available from the National Association of Corrosion Engineers, 15835 Park Ten

Place, Houston, TX  77084, 281-228-6200, www.nace.org:

"Control

of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid

Storage Systems", NACE Recommended Practice RP0285-85, approved March 1985,

referenced in 35 Ill. Adm. Code 724.292, 724.295, 725.292, and 725.295.

NFPA

/ui/#search.

NACE.

Available from the National Association of Corrosion Engineers, 15835 Park Ten

Place, Houston, TX  77084, 281-228-6200, www.nace.org:

"Control

of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid

Storage Systems", NACE Recommended Practice RP0285-85, approved March 1985,

referenced in 35 Ill. Adm. Code 724.292, 724.295, 725.292, and 725.295.

NFPA.

Available from the National Fire Protection Association, P.O. Box 9101, Quincy,

MA  02269-9101, 800-344-3555, www.nfpa.org:

"Flammable and Combustible

Liquids Code", NFPA 30 (1977), referenced in 35 Ill. Adm. Code 722.116.

"Flammable and Combustible

Liquids Code", NFPA 30 (1981), referenced in 35 Ill. Adm. Code 722.116.

"Flammable and Combustible

Liquids Code", NFPA 30 (1984), referenced in 35 Ill. Adm. Code 721.298, 724.298,

725.298, 726.211, and 727.290.

"Flammable and Combustible

Liquids Code", NFPA 30 (1987), referenced in 35 Ill. Adm. Code 721.298, 722.116,

724.298, 725.298, 726.211, and 727.290.

"Flammable

and Combustible Liquids Code", NFPA 30 (2003), as supplemented by TIA 03-1

(2004), and corrected by Errata 30-03-01 (2004), referenced in 35 Ill. Adm.

Code 721.298, 722.116, 724.298, 725.298, 726.211, and 727.290.

"Standard System for the

Identification of the Hazards of Materials for Emergency Response", NFPA

704 (2012), referenced in 35 Ill. Adm. Code 722.114 and 722.116.

USEPA, NSCEP.  National Service

Center for Environmental Publications, https://www.epa.gov/nscep.

"Method 1664, n-Hexane

Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane

Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry",

Revision A, February 1999, USEPA publication number EPA-821/R-98-002,

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.  (Search:  821r98002.)

Also available from NTIS

Publications, https://www.epa.gov/nscep.

"Method 1664, n-Hexane

Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane

Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry",

Revision A, February 1999, USEPA publication number EPA-821/R-98-002,

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.  (Search:  821r98002.)

Also available from NTIS.

"Method 1664, n-Hexane

Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane

Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry",

Revision B, February 2010, USEPA publication number EPA-821/R-10-001,

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.  (Search:  821r10001.)

Also available from NTIS.

NTIS.

Available from the National Technical Information Service, U.S. Department of

Commerce, 5301 Shawnee Road, Alexandria, VA  22312, 703-605-6000 or

800-553-6847, www.ntis.gov:

"APTI Course 415: Control of

Gaseous Emissions", December 1981, USEPA publication number EPA-450/2-81-005,

NTIS document number PB80-208895, USEPA-approved for 35 Ill. Adm. Code 703.210,

703.211, 703.352, 724.935, and 725.935.  Also available from NSCEP.

BOARD NOTE:  "APTI"

denotes USEPA's "Air Pollution Training Institute".

"Generic

Quality Assurance Project Plan for Land Disposal Restrictions Program", USEPA

publication number EPA-530/SW-87-011, March 15, 1987, NTIS document number

PB88-170766, referenced in 35 Ill. Adm. Code 728.106.

"Method 1664,

n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated

n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and

Gravimetry", Revision A, February 1999, USEPA publication number EPA-821/R-98-002,

NTIS document number PB99-121949, USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.  Also available from USEPA, NSCEP

ll. Adm. Code 728.106.

"Method 1664,

n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated

n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and

Gravimetry", Revision A, February 1999, USEPA publication number EPA-821/R-98-002,

NTIS document number PB99-121949, USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.  Also available from USEPA, NSCEP.

"Method 1664, n-Hexane

Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane

Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry",

Revision B, February 2010, USEPA publication number EPA-821/R-10-001, NTIS

document number PB2011-100735, USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.  Also available from USEPA, NSCEP.

"Methods

for Chemical Analysis of Water and Wastes", Third Edition, March 1983,

USEPA document number EPA-600/4-79-020, NTIS document number PB84-128677,

referenced in 35 Ill. Adm. Code 725.192.  Also available from USEPA, NSCEP.

"North American Industry

Classification System", July 2017, U.S. Department of Commerce, Bureau of

the Census, document number PB2007-100002 (hardcover printed volume) or PB2007-500023,

referenced in Section 720.110 (definition of "NAICS Code") for the

purposes of Section 720.142, and in 35 Ill. Adm. Code 721.104.

BOARD NOTE:  Also available on the

Internet from the Bureau of Census at www.census.gov/eos/www/naics.

"Procedures Manual for Ground

Water Monitoring at Solid Waste Disposal Facilities", August 1977, EPA-530/SW-611,

NTIS document number PB84-174820, referenced in 35 Ill. Adm. Code 725.192.  Also

available from USEPA, NSCEP.

"Screening Procedures for

Estimating the Air Quality Impact of Stationary Sources", October 1992, USEPA

publication number EPA-454/R-92-019, NTIS document number 93-219095, referenced

in 35 Ill. Adm. Code 726.204 and 726.206.  Also available from USEPA, NSCEP and

USEPA, Receptor Analysis Branch

ent number PB84-174820, referenced in 35 Ill. Adm. Code 725.192.  Also

available from USEPA, NSCEP.

"Screening Procedures for

Estimating the Air Quality Impact of Stationary Sources", October 1992, USEPA

publication number EPA-454/R-92-019, NTIS document number 93-219095, referenced

in 35 Ill. Adm. Code 726.204 and 726.206.  Also available from USEPA, NSCEP and

USEPA, Receptor Analysis Branch.

"Test

Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication

number EPA-530/SW-846 (Third Edition, November 1986; Revision 6, January 2005),

as amended by Updates I (July 1992), II (November 1994), IIA (August 1993), IIB

(January 1995), III (December 1996), IIIA (April 1998), and IIIB (November

2004) (document number 955-001-00000-1), generally referenced in Appendices A

and I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 726.200, 726.206, 726.212,

728.106, and 728.107 (in addition to the references cited below for specific

methods), www.epa.gov/hw-sw846:

Method 0010 (November

1986) (Modified Method 5 Sampling Train), USEPA-approved for Appendix I to 35

Ill. Adm. Code 721.

Method 0011

(December 1996) (Sampling for Selected Aldehyde and Ketone Emissions from

Stationary Sources), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and

Appendix I to 35 Ill. Adm. Code 726.

Method 0020 (November 1986)

(Source Assessment Sampling System), USEPA-approved for Appendix I to 35 Ill.

Adm. Code 721.

Method 0023A

(December 1996) (Sampling Method for Polychlorinated Dibenzo-p-Dioxins and

Polychlorinated Dibenzofuran Emissions from Stationary Sources), USEPA-approved

for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726,

and 35 Ill. Adm. Code 726.204.

Method 0030 (November

1986) (Volatile Organic Sampling Train), USEPA-approved for Appendix I to 35

Ill. Adm. Code 721.

Method 0031

(December 1996) (Sampling Method for Volatile Organic Compounds (SMVOC)),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721

Sources), USEPA-approved

for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726,

and 35 Ill. Adm. Code 726.204.

Method 0030 (November

1986) (Volatile Organic Sampling Train), USEPA-approved for Appendix I to 35

Ill. Adm. Code 721.

Method 0031

(December 1996) (Sampling Method for Volatile Organic Compounds (SMVOC)),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0040 (December 1996)

(Sampling of Principal Organic Hazardous Constituents from Combustion Sources

Using Tedlar

®

Bags), USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.

Method 0050

(December 1996) (Isokinetic HCl/Cl

2

Emission Sampling Train),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill.

Adm. Code 726, and 35 Ill. Adm. Code 726.207.

Method 0051

(December 1996) (Midget Impinger HCl/Cl

2

Emission Sampling Train),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill.

Adm. Code 726, and 35 Ill. Adm. Code 726.207.

Method 0060

(December 1996) (Determination of Metals in Stack Emissions), USEPA-approved

for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726,

and 35 Ill. Adm. Code 726.206.

Method 0061 (December 1996)

(Determination of Hexavalent Chromium Emissions from Stationary Sources),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, 35 Ill. Adm. Code

726.206, and Appendix I to 35 Ill. Adm. Code 726.

Method 1010B

(December 2018) (Test Methods for Flash Point by Pensky-Martens Closed Cup

Tester), USEPA-approved for 35 Ill. Adm. Code 721.121 and Appendix I to 35 Ill.

Adm. Code 721.

Method 1020B

(November 2004) (Standard Test Methods for Flash Point by Setaflash (Small

Scale) Closed-cup Apparatus), USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.

Method 1020C

(December 2018) (Test Methods for Flash Point by Pensky-Martens Closed Cup Tester),

USEPA-approved for 35 Ill. Adm. Code 721.121 and Appendix I to 35 Ill. Adm.

Code 721

Appendix I to 35 Ill.

Adm. Code 721.

Method 1020B

(November 2004) (Standard Test Methods for Flash Point by Setaflash (Small

Scale) Closed-cup Apparatus), USEPA-approved for Appendix I to 35 Ill. Adm.

Code 721.

Method 1020C

(December 2018) (Test Methods for Flash Point by Pensky-Martens Closed Cup Tester),

USEPA-approved for 35 Ill. Adm. Code 721.121 and Appendix I to 35 Ill. Adm.

Code 721.

Method 1110A

(November 2004) (Corrosivity Toward Steel), USEPA-approved for 35 Ill. Adm.

Code 721.122 and Appendix I to 35 Ill. Adm. Code 721.

Method 1310B

(November 2004) (Extraction Procedure (EP) Toxicity Test Method and Structural

Integrity Test), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and

referenced in Appendix I to 35 Ill. Adm. Code 728.

Method 1311 (November

1992) (Toxicity Characteristic Leaching Procedure), USEPA-approved for Appendix

I to 35 Ill. Adm. Code 721; for 35 Ill. Adm. Code 721.124, 728.107, and

728.140; and for Table T to 35 Ill. Adm. Code 728.

Method 1312 (November

1994) (Synthetic Precipitation Leaching Procedure), USEPA-approved for Appendix

I to 35 Ill. Adm. Code 721.

Method 1320 (November

1986) (Multiple Extraction Procedure), USEPA-approved for Appendix I to 35 Ill.

Adm. Code 721.

Method 1330A (November

1992) (Extraction Procedure for Oily Wastes), USEPA-approved for Appendix I to

35 Ill. Adm. Code 721.

Method 9010C

(November 2004) (Total and Amenable Cyanide:  Distillation), USEPA-approved for

Appendix I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 728.140, 728.144, and

728.148, referenced in Tables H and U to 35 Ill. Adm. Code 728.

Method 9012B

(November 2004) (Total and Amenable Cyanide (Automated Colorimetric, with

Off-Line Distillation)), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721

and 35 Ill. Adm. Code 728.140, 728.144, and 728.148, referenced in Tables H and

U to 35 Ill. Adm. Code 728.

Method 9040C

(November 2004) (pH Electrometric Measurement), USEPA-approved for 35 Ill. Adm.

Code 721.122 and Appendix I to 35 Ill. Adm. Code 721

04) (Total and Amenable Cyanide (Automated Colorimetric, with

Off-Line Distillation)), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721

and 35 Ill. Adm. Code 728.140, 728.144, and 728.148, referenced in Tables H and

U to 35 Ill. Adm. Code 728.

Method 9040C

(November 2004) (pH Electrometric Measurement), USEPA-approved for 35 Ill. Adm.

Code 721.122 and Appendix I to 35 Ill. Adm. Code 721.

Method 9045D

(November 2004) (Soil and Waste pH), USEPA-approved for Appendix I to 35 Ill.

Adm. Code 721.

Method 9060A

(November 2004) (Total Organic Carbon), USEPA-approved for Appendix I to 35

Ill. Adm. Code 721 and 35 Ill. Adm. Code 721.934, 721.963, 724.934, 724.963,

725.934, and 725.963.

Method 9070A

(November 2004) (n-Hexane Extractable Material (HEM) for Aqueous Samples),

USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9071B

(April 1998) (n-Hexane Extractable Material (HEM) for Sludge, Sediment, and

Solid Samples), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9095B

(November 2004) (Paint Filter Liquids Test), USEPA-approved for 35 Ill. Adm.

Code 720.110; Appendix I to 35 Ill. Adm. Code 721; and 35 Ill. Adm. Code

724.290, 724.414, 725.290, 725.414, 725.981, 727.290, and 728.132.

OECD. Organization for Economic Cooperation

and Development, Environment Directorate, 2 rue André Pascal, F-75775 Paris

Cedex 16, France (www.oecd.org), also OECD Washington Center, 1776 I Street, NW,

Suite 450, Washington, DC 20006, 202-452-0050 www.oecd-ilibrary.org:

OECD Guidance Manual

. Adm. Code 721; and 35 Ill. Adm. Code

724.290, 724.414, 725.290, 725.414, 725.981, 727.290, and 728.132.

OECD. Organization for Economic Cooperation

and Development, Environment Directorate, 2 rue André Pascal, F-75775 Paris

Cedex 16, France (www.oecd.org), also OECD Washington Center, 1776 I Street, NW,

Suite 450, Washington, DC 20006, 202-452-0050 www.oecd-ilibrary.org:

OECD Guidance Manual.  "Guidance

Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended,

on the Control of Transboundary Movements of Wastes Destined for Recovery

Operations", 2009 (also called "Guidance Manual for the Control of

Transboundary Movements of Recoverable Materials" in OECD documents), but

only the following segments, which set forth the substantive requirements of

OECD decision C(2001)107/FINAL (June 14, 2001), as amended by C(2001)107/ADD1 (February

28, 2002), C(2004)20 (March 9, 2004), C(2005)141 (December 2, 2005), and

C(2008)156 (December 4, 2008):

"Annex B:  OECD Consolidated

List of Wastes Subject to the Green Control Procedure" (individually

referred to as "Annex B to OECD Guidance Manual" in 35 Ill. Adm. Code

722), combining Appendix 3 to OECD decision C(2001)107/FINAL, as amended as

described above, together with the text of Annex IX ("List B") to the

"Basel Convention on the Control of Transboundary Movements of Hazardous

Wastes and Their Disposal" ("Basel Convention").  Latest Board

search for updated version:  August 2020.

"Annex C:  OECD Consolidated

List of Wastes Subject to the Amber Control Procedure" (individually

referred to as "Annex C to OECD Guidance Manual" in 35 Ill. Adm. Code

722), combining Appendix 4 to OECD decision C(2001)107/FINAL, as amended,

together with the text of Annexes II ("Categories of Wastes Requiring

Special Consideration") and VIII ("List A") to the Basel

Convention.  Latest Board search for updated version:  August 2020

tes Subject to the Amber Control Procedure" (individually

referred to as "Annex C to OECD Guidance Manual" in 35 Ill. Adm. Code

722), combining Appendix 4 to OECD decision C(2001)107/FINAL, as amended,

together with the text of Annexes II ("Categories of Wastes Requiring

Special Consideration") and VIII ("List A") to the Basel

Convention.  Latest Board search for updated version:  August 2020.

BOARD NOTE:  The OECD Guidance

Manual is available online from OECD at www.oecd.org/environment/waste/guidance-manual-control-transboundary-movements-recoverable-wastes.pdf.

The OECD and the Basel Convention consider the OECD Guidance Manual unofficial

text of these documents.  Despite this unofficial status, the Board has chosen

to follow USEPA's lead and incorporate the OECD Guidance Manual by reference,

instead of separately incorporating the OECD decision C(2001)107/FINAL (with

its subsequent amendments:  OECD decisions C(2001)107/ADD1, C(2004)20,

C(2005)141, and C(2008)156) and the Basel Convention by reference.  Use of the

OECD Guidance Manual eases reference to the documents, increases access to the

documents, and facilitates future updates to this incorporation by reference.

All references to "OECD C(2001)107/FINAL" in the text of 35 Ill. Adm.

Code 722 refer to both the OECD decision and the Basel Convention that the OECD

decision references.  The OECD Guidance Manual includes as Annex A the full

text of OECD document C(2001)107/FINAL, with amendments, and Annexes B and C

set forth lists of wastes subject to Green control procedures and wastes

subject to Amber control procedures, respectively, which consolidate the wastes

from C(2001)107/FINAL together with those from the Basel Convention.

OECD Guideline

for Testing of Chemicals, "Ready Biodegradability", Method 301B (July

17, 1992), "CO

2

Evolution (Modified Sturm Test)",

referenced in 35 Ill. Adm. Code 724.414.  Latest Board search for updated

version:  August 2020.

STI

d wastes

subject to Amber control procedures, respectively, which consolidate the wastes

from C(2001)107/FINAL together with those from the Basel Convention.

OECD Guideline

for Testing of Chemicals, "Ready Biodegradability", Method 301B (July

17, 1992), "CO

2

Evolution (Modified Sturm Test)",

referenced in 35 Ill. Adm. Code 724.414.  Latest Board search for updated

version:  August 2020.

STI.

Available from the Steel Tank Institute, 944 Donata Ct., Lake Zurich, IL  60047,

847-438-8265, stispfa.org:

"Standard

for Dual Wall Underground Steel Storage Tanks" (1986), referenced in 35

Ill. Adm. Code 724.293.

USDOD.  Available

from the United States Department of Defense:

"Defense

Explosives Safety Regulation 6055.09, Edition 1" (DESR 6055.09), as in

effect on January 13, 2019, referenced in 35 Ill. Adm. Code 726.305.  Latest

Board search for updated version:  August 2020.

"The

Motor Vehicle Inspection Report" (DD Form 626), as in effect in October

2011, referenced in 35 Ill. Adm. Code 726.303.  Latest Board search for updated

version:  August 2020.

"Requisition

Tracking Form" (DD Form 1348), as in effect in July 1991, referenced in 35

Ill. Adm. Code 726.303.  Latest Board search for updated version:  August 2020.

"The

Signature and Tally Record" (DD Form 1907), as in effect in October 2011, referenced

in 35 Ill. Adm. Code 726.303.  Latest Board search for updated version:  August

2020.

"DOD

Multimodal Dangerous Goods Declaration" (DD Form 2890), as in effect in September

2015, referenced in 35 Ill. Adm. Code 726.303.  Latest Board search for updated

version:  August 2020.

BOARD NOTE:  DESR 6055.09, DD Form

626, DD Form 1348, DD Form 1907, and DD Form 2890 are available on-line for

download in pdf format from www.esd.whs.mil/DD/.

USEPA, e-Manifest System.

Available from United States Environmental Protection Agency, e-Manifest System

(www.epa.gov/e-manifest):

"Hazardous Waste Manifest

Instructions"

.303.  Latest Board search for updated

version:  August 2020.

BOARD NOTE:  DESR 6055.09, DD Form

626, DD Form 1348, DD Form 1907, and DD Form 2890 are available on-line for

download in pdf format from www.esd.whs.mil/DD/.

USEPA, e-Manifest System.

Available from United States Environmental Protection Agency, e-Manifest System

(www.epa.gov/e-manifest):

"Hazardous Waste Manifest

Instructions". Instructions for revision 12-17 of USEPA Forms 8700-22 and

8700-22A, referenced in 35 Ill. Adm. Code 722.120.  Available at www.epa.gov/hwgenerators/uniform-hazardous-waste-manifest-instructions-sample-form-and-continuation-sheet.

Latest Board search for updated version:  August 2020.

USEPA, OGWDW.

Available from United States Environmental Protection Agency, Office of Ground

Water and Drinking Water, State Programs Division, 1200 Pennsylvania Ave., N.W.

(Mail Code 4606M), Washington, DC  20460:

"Inventory of Injection Wells",

USEPA Form 7520-16 (Revised 8-01), referenced in 35 Ill. Adm. Code 704.148 and

704.283.

"Technical

Assistance Document:  Corrosion, Its Detection and Control in Injection Wells",

USEPA publication number EPA-570/9-87-002, August 1987, referenced in 35 Ill.

Adm. Code 730.165.

USEPA,

Receptor Analysis Branch.  Available from Receptor Analysis Branch, USEPA

(MD-14), Research Triangle Park, NC  27711:

"Screening

Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised",

October 1992, USEPA publication number EPA-450/R-92-019, USEPA-approved for

Appendix I to 35 Ill. Adm. Code 726.

BOARD NOTE:  Also

available for purchase from NTIS (see above) and on the Internet at www3.epa.gov/scram001/guidance/guide/EPA-454R-92-019_OCR.pdf.

USEPA Region

6.  Available from United States Environmental Protection Agency, Region 6,

Multimedia Permitting and Planning Division, 1445 Ross Avenue, Dallas, TX  75202

(phone: 214-665-7430):

"EPA RCRA

Delisting Program – Guidance Manual for the Petitioner", March 23, 2000,

referenced in Section 720.122.

USGSA

d on the Internet at www3.epa.gov/scram001/guidance/guide/EPA-454R-92-019_OCR.pdf.

USEPA Region

6.  Available from United States Environmental Protection Agency, Region 6,

Multimedia Permitting and Planning Division, 1445 Ross Avenue, Dallas, TX  75202

(phone: 214-665-7430):

"EPA RCRA

Delisting Program – Guidance Manual for the Petitioner", March 23, 2000,

referenced in Section 720.122.

USGSA.  Available

from the United States Government Services Administration:

Government

Bill of Lading (GBL) (GSA Standard Form 1103, rev 9/2003, supplemented as

necessary with GSA Standard Form 1109, rev 09/1998), referenced in Section

726.303.  Latest Board search for updated version:  August 2020.

BOARD NOTE:  Available on-line for

download in various formats from www.gsa.gov/forms/forms.htm.

b)         Code of Federal Regulations.  Available from the

Superintendent of Documents, U.S. Government Publishing Office, Washington, DC

20401, 202-783-3238, www.ecfr.gov or https://www.govinfo.gov/app/collection/cfr:

10 CFR 20.2006 (2023) (Transfer for Disposal and Manifests), referenced

in 35 Ill. Adm. Code 726.425 and 726.450.

Table II, column 2 in appendix B to 10 CFR 20 (2023) (Water Effluent

Concentrations), referenced in 35 Ill. Adm. Code 702.110, 730.103, and 730.151.

Appendix G

to 10 CFR 20 (2023) (Requirements for Transfers of Low-Level Radioactive Waste Intended

for Disposal at Licensed Land Disposal Facilities and Manifests), referenced in

35 Ill. Adm. Code 726.440.

10 CFR 71 (2023) (Packaging and Transportation of Radioactive Material),

referenced generally in 35 Ill. Adm. Code 726.430.

10 CFR 71.5 (2023) (Transportation

of Licensed Material), referenced in 35 Ill. Adm. Code 726.425.

15 CFR 30.4(b) (2023) (Electronic

Export Information Filing, Procedures, Deadlines, and Certification

Statements), referenced in 35 Ill. Adm. Code 721.139.

15 CFR 30.6 (2023) (Electronic

Export Information Data Elements), referenced in 35 Ill. Adm. Code 721.139

rally in 35 Ill. Adm. Code 726.430.

10 CFR 71.5 (2023) (Transportation

of Licensed Material), referenced in 35 Ill. Adm. Code 726.425.

15 CFR 30.4(b) (2023) (Electronic

Export Information Filing, Procedures, Deadlines, and Certification

Statements), referenced in 35 Ill. Adm. Code 721.139.

15 CFR 30.6 (2023) (Electronic

Export Information Data Elements), referenced in 35 Ill. Adm. Code 721.139.

21 CFR 203.3(y) (2023) ("Prescription

Drug"), referenced in 35 Ill. Adm. Code 726.600.

21 CFR 1300 through 1317 (2023)

(Drug Enforcement Administration, Department of Justice), referenced in 35 Ill.

Adm. Code 726.604 and 726.606.

21 CFR 1300.01 (2023) (Definitions

Relating to Controlled Substances), referenced in 35 Ill. Adm. Code 726.604 and

726.606.

21 CFR 1300.05 (2023) (Definitions

Relating to the Disposal of Controlled Substances), referenced in 35 Ill. Adm.

Code 726.606.

21 CFR 1308.11 through 1308.15 (2023)

(Schedules), referenced in 35 Ill. Adm. Code 726.606.

21 CFR 1317.90 (2023) (Methods of

Destruction), referenced in 35 Ill. Adm. Code 726.606.

21 CFR 1317.95 (2023) (Destruction

Procedures), referenced in 35 Ill. Adm. Code 726.606.

29 CFR 1910.1200 (2023) (Hazard

Communication), referenced in 35 Ill. Adm. Code 722.115.

33 CFR 153.203 (2023) (Procedure for the Notice of Discharge), referenced

in 35 Ill. Adm. Code 723.130 and 739.143.

40 CFR 3.3 (2023) (What

Definitions Are Applicable to This Part?), referenced in Section 720.104.

40 CFR 3.10 (2023) (What Are

the Requirements for Electronic Reporting to EPA?), referenced in Section

720.104.

40 CFR 3.2000 (2023) (What Are

the Requirements Authorized State, Tribe, and Local Programs' Reporting Systems

Must Meet?), referenced in Section 720.104.

40 CFR 51.100(ii) (2023) (Definitions), referenced in 35 Ill. Adm. Code

726.200.

Appendix W to 40

CFR 51 (2023) (Guideline on Air Quality Models), referenced in 35 Ill. Adm.

Code 726.204

c Reporting to EPA?), referenced in Section

720.104.

40 CFR 3.2000 (2023) (What Are

the Requirements Authorized State, Tribe, and Local Programs' Reporting Systems

Must Meet?), referenced in Section 720.104.

40 CFR 51.100(ii) (2023) (Definitions), referenced in 35 Ill. Adm. Code

726.200.

Appendix W to 40

CFR 51 (2023) (Guideline on Air Quality Models), referenced in 35 Ill. Adm.

Code 726.204.

BOARD NOTE:

Also available from NTIS (see above for contact information) as "Guideline

on Air Quality Models", Revised 1986, USEPA publication number EPA-450/12-78-027R,

NTIS document numbers PB86-245248 (Guideline) and PB88-150958 (Supplement).

Appendix B to 40 CFR 52.741 (2023) (VOM Measurement Techniques for Capture

Efficiency), referenced in 35 Ill. Adm. Code 703.213, 703.352, 721.984,

721.986, 721.989, 724.982, 724.984, 724.986, 724.989, 725.983, 725.985,

725.987, and 725.990.

40 CFR 60 (2023) (Standards of Performance for New Stationary Sources),

referenced generally in 35 Ill. Adm. Code 721.104, 721.950, 721.964, 721.980, 724.964,

724.980, 725.964, and 725.980.

Subpart VV of

40 CFR 60 (2023) (Standards of Performance for Equipment Leaks of VOC in the

Synthetic Organic Chemicals Manufacturing Industry), referenced in 35 Ill. Adm.

Code 721.989, 724.989, and 725.990.

Appendix A to

40 CFR 60 (2023) (Test Methods), referenced generally in 35 Ill. Adm. Code

726.205 (in addition to the references cited below for specific methods):

Method 1 (Sample and Velocity

Traverses for Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 2 (Determination of Stack Gas

Velocity and Volumetric Flow Rate (Type S Pitot Tube)), referenced in 35 Ill.

Adm. Code 721.934, 724.933, 724.934, 725.933, 725.934, and 726.205.

Method 2A (Direct Measurement of

Gas Volume through Pipes and Small Ducts), referenced in 35 Ill. Adm. Code 721.933,

724.933, 725.933, and 726.205.

Method 2B (Determination of

Exhaust Gas Volume Flow Rate from Gasoline Vapor Incinerators), referenced in

35 Ill. Adm. Code 726.205

ate (Type S Pitot Tube)), referenced in 35 Ill.

Adm. Code 721.934, 724.933, 724.934, 725.933, 725.934, and 726.205.

Method 2A (Direct Measurement of

Gas Volume through Pipes and Small Ducts), referenced in 35 Ill. Adm. Code 721.933,

724.933, 725.933, and 726.205.

Method 2B (Determination of

Exhaust Gas Volume Flow Rate from Gasoline Vapor Incinerators), referenced in

35 Ill. Adm. Code 726.205.

Method 2C (Determination of Gas

Velocity and Volumetric Flow Rate in Small Stacks or Ducts (Standard Pitot

Tube)), referenced in 35 Ill. Adm. Code 721.933, 724.933, 725.933, and 726.205.

Method 2D (Measurement of Gas

Volume Flow Rates in Small Pipes and Ducts), referenced in 35 Ill. Adm. Code 721.933,

724.933, 725.933, and 726.205.

Method 2E (Determination of

Landfill Gas Production Flow Rate), referenced in 35 Ill. Adm. Code 726.205.

Method 2F (Determination of Stack

Gas Velocity and Volumetric Flow Rate with Three-Dimensional Probes),

referenced in 35 Ill. Adm. Code 726.205.

Method 2G (Determination of Stack

Gas Velocity and Volumetric Flow Rate with Two-Dimensional Probes), referenced

in 35 Ill. Adm. Code 726.205.

Method 2H (Determination of Stack

Gas Velocity Taking into Account Velocity Decay Near the Stack Wall),

referenced in 35 Ill. Adm. Code 726.205.

Method 3 (Gas Analysis for the

Determination of Dry Molecular Weight), referenced in 35 Ill. Adm. Code 724.443

and 726.205.

Method 3A (Determination of Oxygen

and Carbon Dioxide Concentrations in Emissions from Stationary Sources

(Instrumental Analyzer Procedure)), referenced in 35 Ill. Adm. Code 726.205.

Method 3B (Gas Analysis for the Determination

of Emission Rate Correction Factor or Excess Air), referenced in 35 Ill. Adm.

Code 726.205.

Method 3C (Determination of Carbon

Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources), referenced in

35 Ill. Adm. Code 726.205.

Method 4 (Determination of

Moisture Content in Stack Gases), referenced in 35 Ill. Adm. Code 726.205

. Code 726.205.

Method 3B (Gas Analysis for the Determination

of Emission Rate Correction Factor or Excess Air), referenced in 35 Ill. Adm.

Code 726.205.

Method 3C (Determination of Carbon

Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources), referenced in

35 Ill. Adm. Code 726.205.

Method 4 (Determination of

Moisture Content in Stack Gases), referenced in 35 Ill. Adm. Code 726.205.

Method 5 (Determination of

Particulate Matter Emissions from Stationary Sources), referenced in 35 Ill.

Adm. Code 726.205.

Method 5A (Determination of

Particulate Matter Emissions from the Asphalt Processing and Asphalt Roofing

Industry), referenced in 35 Ill. Adm. Code 726.205.

Method 5B (Determination of

Nonsulfuric Acid Particulate Matter Emissions from Stationary Sources), referenced

in 35 Ill. Adm. Code 726.205.

Method 5D (Determination of

Particulate Matter Emissions from Positive Pressure Fabric Filters), referenced

in 35 Ill. Adm. Code 726.205.

Method 5E (Determination of

Particulate Matter Emissions from the Wool Fiberglass Insulation Manufacturing

Industry), referenced in 35 Ill. Adm. Code 726.205.

Method 5F (Determination of

Nonsulfate Particulate Matter Emissions from Stationary Sources), referenced in

35 Ill. Adm. Code 726.205.

Method 5G (Determination of

Particulate Matter Emissions from Wood Heaters (Dilution Tunnel Sampling

Location)), referenced in 35 Ill. Adm. Code 726.205.

Method 5H (Determination of

Particulate Emissions from Wood Heaters from a Stack Location), referenced in

35 Ill. Adm. Code 726.205.

Method 5I (Determination of Low

Level Particulate Matter Emissions from Stationary Sources), referenced in 35

Ill. Adm. Code 726.205.

Method 18 (Measurement of Gaseous

Organic Compound Emissions by Gas Chromatography), referenced in 35 Ill. Adm.

Code 721.933, 721.934, 724.933, 724.934, 725.933, and 725.934.

Method 21

(Determination of Volatile Organic Compound Leaks), referenced in 35 Ill. Adm

ethod 5I (Determination of Low

Level Particulate Matter Emissions from Stationary Sources), referenced in 35

Ill. Adm. Code 726.205.

Method 18 (Measurement of Gaseous

Organic Compound Emissions by Gas Chromatography), referenced in 35 Ill. Adm.

Code 721.933, 721.934, 724.933, 724.934, 725.933, and 725.934.

Method 21

(Determination of Volatile Organic Compound Leaks), referenced in 35 Ill. Adm.

Code 703.213, 721.934, 721.935, 721.963, 721.983, 724.934, 724.935, 724.963,

725.934, 725.935, 725.963, and 725.984.

Method 22 (Visual Determination of

Fugitive Emissions from Material Sources and Smoke Emissions from Flares),

referenced in 35 Ill. Adm. Code 721.933, 724.933, 724.1101, 725.933, 725.1101,

and 727.900.

Method 23 (Determination of Polychlorinated Dibenzo-

p

-Dioxins

and Polychlorinated Dibenzofurans from Stationary Sources)

referenced in 35

Ill. Adm. Code 726.204.

Method 25A (Determination of Total

Gaseous Organic Concentration Using a Flame Ionization Analyzer), referenced in

35 Ill. Adm. Code 721.934, 724.934, and 725.985.

Method 25D (Determination of the

Volatile Organic Concentration of Waste Samples), referenced in 35 Ill. Adm.

Code 721.983, 724.982, 725.983, and 725.984.

Method 25E (Determination of Vapor

Phase Organic Concentration in Waste Samples), referenced in 35 Ill. Adm. Code 721.983

and 725.984.

Method 27 (Determination of Vapor

Tightness of Gasoline Delivery Tank Using Pressure-Vacuum Test), referenced in

35 Ill. Adm. Code 721.986, 724.986, and 725.987.

40 CFR 61 (2023)

(National Emission Standards for Hazardous Air Pollutants), referenced

generally in 35 Ill. Adm. Code 721.104, 721.933, 721.950, 721.964, 721.980, 724.933,

724.964, 725.933, 725.964, and 725.980.

Subpart V of 40 CFR 61 (2023) (National Emission Standard for Equipment

Leaks (Fugitive Emission Sources)), referenced in 35 Ill. Adm. Code 721.989, 724.989,

and 725.990.

Subpart FF of

40 CFR 61 (2023) (National Emission Standard for Benzene Waste Operations), referenced

in 35 Ill. Adm

Ill. Adm. Code 721.104, 721.933, 721.950, 721.964, 721.980, 724.933,

724.964, 725.933, 725.964, and 725.980.

Subpart V of 40 CFR 61 (2023) (National Emission Standard for Equipment

Leaks (Fugitive Emission Sources)), referenced in 35 Ill. Adm. Code 721.989, 724.989,

and 725.990.

Subpart FF of

40 CFR 61 (2023) (National Emission Standard for Benzene Waste Operations), referenced

in 35 Ill. Adm. Code 724.982 and 725.983.

40 CFR 63 (2023) (National Emission Standards for Hazardous Air

Pollutants for Source Categories), referenced generally in 35 Ill. Adm. Code 721.293,

721.933, 721.950, 721.964, 721.980, 724.933, 724.964, 724.980, 725.933,

725.964, 725.980, and 726.200.

Subpart RR of 40 CFR 63 (2023) (National Emission Standards for

Individual Drain Systems), referenced in 35 Ill. Adm. Code 721.984, 724.984,

724.985, 725.985, and 725.986.

Subpart EEE of 40 CFR 63 (2000)

(National Emission Standards for Hazardous Air Pollutants from Hazardous Waste

Combustors), referenced in 35 Ill. Adm. Code 703.280.

Subpart EEE of 40 CFR 63 (2023) (National Emission Standards for

Hazardous Air Pollutants from Hazardous Waste Combustors) (includes 40 CFR

63.1206 (When and How Must You Comply with the Standards and Operating

Requirements?), 63.1215 (What are the Health-Based Compliance Alternatives for

Total Chlorine?), 63.1216 (What are the Standards for Solid-Fuel Boilers that

Burn Hazardous Waste?), 63.1217 (What are the Standards for Liquid-Fuel Boilers

that Burn Hazardous Waste?), 63.1218 (What are the Standards for Hydrochloric

Acid Production Furnaces that Burn Hazardous Waste?), 63.1219 (What are the

Replacement Standards for Hazardous Waste Incinerators?), 63.1220 (What are the

Replacement Standards for Hazardous Waste-Burning Cement Kilns?), and 63.1221

(What are the Replacement Standards for Hazardous Waste-Burning Lightweight

Aggregate Kilns?)), referenced in Appendix A to 35 Ill. Adm. Code 703 and 35

Ill. Adm

Acid Production Furnaces that Burn Hazardous Waste?), 63.1219 (What are the

Replacement Standards for Hazardous Waste Incinerators?), 63.1220 (What are the

Replacement Standards for Hazardous Waste-Burning Cement Kilns?), and 63.1221

(What are the Replacement Standards for Hazardous Waste-Burning Lightweight

Aggregate Kilns?)), referenced in Appendix A to 35 Ill. Adm. Code 703 and 35

Ill. Adm. Code 703.155, 703.205, 703.208, 703.221, 703.232, 703.320, 703.280,

724.440, 724.701, 724.950, 725.440, and 726.200.

Method 301 (Field Validation of Pollutant

Measurement Methods from Various Waste Media) in appendix A to 40 CFR 63 (2023)

(Test Methods), referenced in 35 Ill. Adm. Code 721.983 and 725.984.

Appendix C to 40 CFR 63 (2023) (Determination

of the Fraction Biodegraded (F

bio

) in a Biological Treatment Unit),

referenced in 35 Ill. Adm. Code 725.984.

Appendix D to 40 CFR 63 (2023)

(Test Methods), referenced in 35 Ill. Adm. Code 721.983 and 725.984.

40 CFR 136.3

(Identification of Test Procedures) (2023), referenced in 35 Ill. Adm. Code

702.110, 704.150, 704.187, and 730.103.

40 CFR

144.70 (2023) (Wording of the Instruments), referenced in 35 Ill. Adm. Code

704.240.

40 CFR 232.2 (2023) (Definitions), referenced in 35 Ill. Adm. Code

721.104.

40 CFR 257 (2023)

(Criteria for Classification of Solid Waste Disposal Facilities and Practices),

referenced in 35 Ill. Adm. Code 739.181.

Subpart B of

40 CFR 257 (2023) (Disposal Standards for the Receipt of Conditionally Exempt

Small Quantity Generator (CESQG) Wastes at Non-Municipal Non-Hazardous Waste

Disposal Units) (40 CFR 257.5 through 257.30), referenced in 35 Ill. Adm. Code

722.114.

40 CFR 258 (2023) (Criteria for Municipal Solid Waste Landfills),

referenced in 35 Ill. Adm. Code 739.181.

40 CFR 260.21(b) (2023) (Alternative

Equivalent Testing Methods), referenced in Section 720.121.

40 CFR 261.151 (2023)

(Wording of the Instruments), referenced in 35 Ill. Adm. Code 721.251

rdous Waste

Disposal Units) (40 CFR 257.5 through 257.30), referenced in 35 Ill. Adm. Code

722.114.

40 CFR 258 (2023) (Criteria for Municipal Solid Waste Landfills),

referenced in 35 Ill. Adm. Code 739.181.

40 CFR 260.21(b) (2023) (Alternative

Equivalent Testing Methods), referenced in Section 720.121.

40 CFR 261.151 (2023)

(Wording of the Instruments), referenced in 35 Ill. Adm. Code 721.251.

Appendix III to 40 CFR 261 (2023)

(Chemical Analysis Test Methods), referenced in 35 Ill. Adm. Code 704.150 and

704.187.

Appendix to 40 CFR 262 (2023) (Uniform

Hazardous Waste Manifest and Instructions (EPA Forms 8700-22 and 8700-22A and Their

Instructions)), referenced in Appendix A to 35 Ill. Adm. Code 722 and 35 Ill.

Adm. Code 724.986 and 725.987.

40 CFR 264.151 (2023) (Wording of the Instruments), referenced in 35 Ill.

Adm. Code 724.251 and 727.240.

40 CFR 264.1311 (2023) (Manifest

Transactions Subject to Fees), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1312 (2023) (User Fee

Calculation Methodology), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1313 (2023) (User Fee

Revisions), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1314 (2023) (How to

Make User Fee Payments), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1315 (2023) (Sanctions

for Delinquent Payments), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1316 (2023) (Informal

Fee Dispute Resolution), referenced in 35 Ill. Adm. Code 724.171.

Subpart FF of 40 CFR 264 (2023)

(Fees for the Electronic Hazardous Waste Manifest Program), referenced in Sections

720.104 and 720.105.

Appendix I to 40 CFR 264 (2023) (Recordkeeping

Instructions), referenced in Appendix A to 35 Ill. Adm. Code 724.

Appendix IV to 40 CFR 264 (2023)

(Cochran's Approximation to the Behrens-Fisher Students' T-Test), referenced in

Appendix D to 35 Ill. Adm. Code 724.

Appendix V to 40 CFR 264 (2023) (Examples

of Potentially Incompatible Waste), referenced in Appendix E to 35 Ill. Adm.

Code 724 and 35 Ill. Adm. Code 727.270

(2023) (Recordkeeping

Instructions), referenced in Appendix A to 35 Ill. Adm. Code 724.

Appendix IV to 40 CFR 264 (2023)

(Cochran's Approximation to the Behrens-Fisher Students' T-Test), referenced in

Appendix D to 35 Ill. Adm. Code 724.

Appendix V to 40 CFR 264 (2023) (Examples

of Potentially Incompatible Waste), referenced in Appendix E to 35 Ill. Adm.

Code 724 and 35 Ill. Adm. Code 727.270.

Appendix VI to 40 CFR 264 (2023) (Political

Jurisdictions in Which Compliance with § 264.18(a) Must Be Demonstrated),

referenced in 35 Ill. Adm. Code 703.306, 724.118, and 727.110.

40 CFR 265.1311 (2023) (Manifest

Transactions Subject to Fees), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1312 (2023) (User Fee

Calculation Methodology), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1313 (2023) (User Fee

Revisions), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1314 (2023) (How to

Make User Fee Payments), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1315 (2023) (Sanctions

for Delinquent Payments), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1316 (2023) (Informal

Fee Dispute Resolution), referenced in 35 Ill. Adm. Code 725.171.

Subpart FF of 40 CFR 265 (2023)

(Fees for the Electronic Hazardous Waste Manifest Program), referenced in Sections

720.104 and 720.105.

Appendix I to 40 CFR 265 (2023)

(Recordkeeping Instructions), referenced in Appendix A to 35 Ill. Adm. Code

725.

Appendix III to 40 CFR 265 (2023)

(EPA Interim Primary Drinking Water Standards), referenced in Appendix C to 35

Ill. Adm. Code 725.

Appendix IV to 40 CFR 265 (2023)

(Tests for Significance), referenced in Appendix D to 35 Ill. Adm. Code 725.

Appendix V to 40 CFR 265 (2023) (Examples

of Potentially Incompatible Waste), referenced in 35 Ill. Adm. Code 725.277, 725.301,

725.330, 725.357, 725.382, and 725.413 and Appendix E to 35 Ill. Adm. Code 725.

Appendix IX to 40 CFR 266 (2023) (Methods

Manual for Compliance with the BIF Regulations), referenced generally in

Appendix I to 35 Ill. Adm. Code 726

Appendix D to 35 Ill. Adm. Code 725.

Appendix V to 40 CFR 265 (2023) (Examples

of Potentially Incompatible Waste), referenced in 35 Ill. Adm. Code 725.277, 725.301,

725.330, 725.357, 725.382, and 725.413 and Appendix E to 35 Ill. Adm. Code 725.

Appendix IX to 40 CFR 266 (2023) (Methods

Manual for Compliance with the BIF Regulations), referenced generally in

Appendix I to 35 Ill. Adm. Code 726.

Section 4.0 (Procedures for Estimating

the Toxicity Equivalence of Chlorinated Dibenzo-p-Dioxin and Dibenzofuran

Congeners), referenced in 35 Ill. Adm. Code 726.200 and 726.204.

Section 5.0 (Hazardous Waste

Combustion Air Quality Screening Procedure), referenced in 35 Ill. Adm. Code

726.204 and 726.206.

Section 7.0 (Statistical

Methodology for Bevill Residue Determinations), referenced in 35 Ill. Adm. Code

726.212.

BOARD NOTE:  Also available from

NTIS (see above for contact information) as "Methods Manual for Compliance

with BIF Regulations:  Burning Hazardous Waste in Boilers and Industrial

Furnaces", December 1990, USEPA publication number EPA-530/SW-91-010, NTIS

document number PB91-120006.

40 CFR 267.151 (2023) (Wording of

the Instruments), referenced in 35 Ill. Adm. Code 727.240.

40 CFR 270.5 (2023)

(Noncompliance and Program Reporting by the Director), referenced in 35 Ill.

Adm. Code 703.305.

40 CFR 302 (2023)

(Designation, Reportable Quantities, and Notification), referenced in 35 Ill.

Adm. Code 721.293.

40 CFR 403.5 (2023) (National

Pretreatment Standards:  Prohibited Discharges), referenced in 35 Ill. Adm.

Code 721.104 and 726.605.

40 CFR

711.15(a)(4)(i)(C) (2023) (Designation, Reportable Quantities, and

Notification), referenced in 35 Ill. Adm. Code 721.104.

40 CFR 761 (2023) (Polychlorinated Biphenyls (PCBs) Manufacturing,

Processing, Distribution in Commerce, and Use Prohibitions), referenced

generally in 35 Ill. Adm. Code 728.145.

40 CFR 761.3 (2023) (Definitions),

referenced in 35 Ill. Adm. Code 728.102 and 739.110

40 CFR

711.15(a)(4)(i)(C) (2023) (Designation, Reportable Quantities, and

Notification), referenced in 35 Ill. Adm. Code 721.104.

40 CFR 761 (2023) (Polychlorinated Biphenyls (PCBs) Manufacturing,

Processing, Distribution in Commerce, and Use Prohibitions), referenced

generally in 35 Ill. Adm. Code 728.145.

40 CFR 761.3 (2023) (Definitions),

referenced in 35 Ill. Adm. Code 728.102 and 739.110.

40 CFR 761.60 (2023) (Disposal

Requirements), referenced in 35 Ill. Adm. Code 728.142.

40 CFR 761.65 (2023) (Storage for

Disposal), referenced in 35 Ill. Adm. Code 728.150.

40 CFR 761.70 (2023)

(Incineration), referenced in 35 Ill. Adm. Code 728.142.

Subpart B of 49 CFR 107 (2022) (Exemptions), referenced generally in 35

Ill. Adm. Code 724.986 and 725.987.

49 CFR 171 (2022) (General Information, Regulations, and Definitions),

referenced generally in 35 Ill. Adm. Code 721.104, 726.609, 733.118, 733.138,

733.152, and 739.143.

49 CFR 171.3 (2022) (Hazardous

Waste), referenced in 35 Ill. Adm. Code 722.133.

49 CFR 171.8 (2022) (Definitions

and Abbreviations), referenced in 35 Ill. Adm. Code 726.609, 733.118, 733.138,

733.152, 733.155, and 739.143.

49 CFR 171.15 (2022) (Immediate

Notice of Certain Hazardous Materials Incidents), referenced in 35 Ill. Adm.

Code 723.130 and 739.143.

49 CFR 171.16 (2022) (Detailed Hazardous

Materials Incident Reports), referenced in 35 Ill. Adm. Code 723.130 and

739.143.

49 CFR 172 (2022) (Hazardous

Materials Table, Special Provisions, Hazardous Materials Communications,

Emergency Response Information, and Training Requirements), referenced

generally in 35 Ill. Adm. Code 721.104, 721.986, 722.131, 722.132, 724.986,

725.987, 726.609, 733.114, 733.118, 733.134, 733.138, 733.152, 733.155, and

739.143.

Table to 49 CFR 172.101 (2022)

(Hazardous Materials Table), referenced in 35 Ill. Adm. Code 721.104, 722.183,

722.184, 724.112, and 725.112.

49 CFR 172.304 (2022) (Marking Requirements),

referenced in 35 Ill. Adm. Code 722.132 and 766.608

rally in 35 Ill. Adm. Code 721.104, 721.986, 722.131, 722.132, 724.986,

725.987, 726.609, 733.114, 733.118, 733.134, 733.138, 733.152, 733.155, and

739.143.

Table to 49 CFR 172.101 (2022)

(Hazardous Materials Table), referenced in 35 Ill. Adm. Code 721.104, 722.183,

722.184, 724.112, and 725.112.

49 CFR 172.304 (2022) (Marking Requirements),

referenced in 35 Ill. Adm. Code 722.132 and 766.608.

Subpart C of 49 CFR 172 (2022)

(Shipping Papers), referenced in 35 Ill. Adm. Code 722.124 and 726.610.

Subpart D of 49 CFR 172 (2022)

(Marking), referenced in 35 Ill. Adm. Code 726.608.

Subpart E of 49 CFR 172 (2022)

(Labeling), referenced in 35 Ill. Adm. Code 722.114, 722.115, and 726.608.

Subpart F of 49 CFR 172 (2022) (Placarding), referenced in 35 Ill. Adm.

Code 722.114, 722.115, 722.133, and 726.608.

49 CFR 173 (2022) (Shippers – General Requirements for Shipments and

Packages), referenced generally in 35 Ill. Adm. Code 721.104, 721.986, 722.130,

724.416, 724.986, 725.416, 725.987, 726.608, 726.609, 733.118, 733.138,

733.152, and 739.143.

49 CFR 173.2 (2022) (Hazardous

Materials Classes and Index to Hazard Class Definitions), referenced in 35 Ill.

Adm. Code 733.152.

49 CFR 173.12 (2022) (Exceptions

for Shipments of Waste Materials), referenced in 35 Ill. Adm. Code 724.416,

724.986, 725.416, and 725.987.

49 CFR 173.28 (2022) (Reuse,

Reconditioning, and Remanufacture of Packagings), referenced in 35 Ill. Adm.

Code 725.273.

49 CFR 173.50 (2022) (Class 1 −

Definitions), referenced in 35 Ill. Adm. Code 721.123.

49 CFR 173.54 (2022) (Forbidden

Explosives), referenced in 35 Ill. Adm. Code 721.123.

49 CFR 173.115 (2022) (Class 2,

Divisions 2.1, 2.2, and 2.3 − Definitions), referenced in 35 Ill. Adm.

Code 721.121.

49 CFR 173.127 (2022) (Class 2,

Divisions 2.1, 2.2, and 2.3 – Definition and Assignment of Packaging Groups),

referenced in 35 Ill. Adm. Code 721.121.

49 CFR 174 (2022) (Carriage by

Rail), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138,

733.152, and 739.143

9 CFR 173.115 (2022) (Class 2,

Divisions 2.1, 2.2, and 2.3 − Definitions), referenced in 35 Ill. Adm.

Code 721.121.

49 CFR 173.127 (2022) (Class 2,

Divisions 2.1, 2.2, and 2.3 – Definition and Assignment of Packaging Groups),

referenced in 35 Ill. Adm. Code 721.121.

49 CFR 174 (2022) (Carriage by

Rail), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138,

733.152, and 739.143.

49 CFR 175 (2022) (Carriage by

Aircraft), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138,

733.152, and 739.143.

49 CFR 176 (2022) (Carriage by

Vessel), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138,

733.152, and 739.143.

49 CFR 177 (2022) (Carriage by

Public Highway), referenced generally in 35 Ill. Adm. Code 726.609, 733.118,

733.138, 733.152, and 739.143.

49 CFR 177.817 (2022) (Shipping

Papers), referenced in 35 Ill. Adm. Code 722.124.

49 CFR 178 (2022) (Specifications for Packagings), referenced generally

in 35 Ill. Adm. Code 721.104, 721.986, 722.130, 724.416, 724.986, 725.416,

725.987, 726.608, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 179 (2022) (Specifications for Tank Cars), referenced in 35 Ill.

Adm. Code 721.104, 721.986, 722.130, 724.416, 724.986, 725.416, 725.987, 726.609,

733.118, 733.138, 733.152, and 739.143.

49 CFR 180 (2022)

(Continuing Qualification and Maintenance of Packagings), referenced generally

in 35 Ill. Adm. Code 721.986, 724.986, 725.987, 726.608, 726.609, 733.118,

733.138, 733.152, and 739.143.

49 CFR 190 (2022) (Pipeline Safety

Programs and Rulemaking Procedures), referenced generally in 35 Ill. Adm. Code

721.104.

49 CFR 191 (2022) (Transportation

of Natural and Other Gas by Pipeline:  Annual Reports, Incident Reports, and

Safety-Related Condition Reports), referenced generally in 35 Ill. Adm. Code

721.104.

49 CFR 192 (2022) (Transportation

of Natural and Other Gas by Pipeline:  Minimum Federal Safety Standards),

referenced generally in 35 Ill. Adm. Code 721.104

generally in 35 Ill. Adm. Code

721.104.

49 CFR 191 (2022) (Transportation

of Natural and Other Gas by Pipeline:  Annual Reports, Incident Reports, and

Safety-Related Condition Reports), referenced generally in 35 Ill. Adm. Code

721.104.

49 CFR 192 (2022) (Transportation

of Natural and Other Gas by Pipeline:  Minimum Federal Safety Standards),

referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 193 (2022) (Liquefied Natural

Gas Facilities:  Federal Safety Standards), referenced generally in 35 Ill.

Adm. Code 721.104.

49 CFR 194 (2022) (Response Plans

for Onshore Oil Pipelines), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 195 (2022) (Transportation

of Hazardous Liquids by Pipeline), referenced generally in 35 Ill. Adm. Code

721.104.

49 CFR 196 (2022) (Protection of

Underground Pipelines from Excavation Activity), referenced generally in 35

Ill. Adm. Code 721.104.

49 CFR 198 (2022) (Regulations for

Grants to Aid State Pipeline Safety Programs), referenced generally in 35 Ill.

Adm. Code 721.104.

49 CFR 199 (2022) (Drug and

Alcohol Testing), referenced generally in 35 Ill. Adm. Code 721.104.

c)         Federal Statutes:

Section 11 of the Atomic Energy

Act of 1954 (42 U.S.C. 2014 (2018)), referenced in 35 Ill. Adm. Code 721.104

and 726.310.

Sections 301, 304, 307, and 402 of

the Clean Water Act (33 U.S.C. 1311, 1314, 1337, and 1342 (2018)), referenced

in 35 Ill. Adm. Code 721.293.

Sections 201(v), 201(w), and 512(j)

of the Federal Food, Drug, and Cosmetic Act (FFDCA; 21 U.S.C. 321(v), 321(w),

and 360b(j) (2018)), referenced in Section 720.110 and 35 Ill. Adm. Code

733.109.

Section 201(ff) of the Federal

Food, Drug, and Cosmetic Act (FFDCA; 21 U.S.C. 321(ff) (2018)), referenced in

Section 726.600.

Section 102(27) of the Controlled

Substances Act (21 U.S.C. 802(27) (2018) ("Ultimate User")),

referenced in 35 Ill. Adm. Code 726.606.

Section 1004 of the Resource

Conservation and Recovery Act (42 U.S.C. 6903 (2018)), referenced in 35 Ill.

Adm

l. Adm. Code

733.109.

Section 201(ff) of the Federal

Food, Drug, and Cosmetic Act (FFDCA; 21 U.S.C. 321(ff) (2018)), referenced in

Section 726.600.

Section 102(27) of the Controlled

Substances Act (21 U.S.C. 802(27) (2018) ("Ultimate User")),

referenced in 35 Ill. Adm. Code 726.606.

Section 1004 of the Resource

Conservation and Recovery Act (42 U.S.C. 6903 (2018)), referenced in 35 Ill.

Adm. Code 721.931, 721.951, 721.981, 724.931, 724.981, 725.931, 725.951, and

725.981.

Chapter 601 of subtitle VIII of 49

U.S.C. (49 U.S.C. 60101 through 60141 (2018)), referenced in 35 Ill. Adm. Code

721.104.

Section 1412 of the Department of

Defense Authorization Act of 1986 (50 U.S.C. 1521(j)(1) (2018)), referenced in

35 Ill. Adm. Code 726.301.

d)         This Section

incorporates no later editions or amendments.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.