Airworthiness Directives; Airbus Model A330 and A340 Series Airplanes

FederalRegulations

Ask Donna

How this section applies to your facts.

Federal Register › Vol. 63 › 63 FR 1909

This text was captured on Sep 30, 2026. It is a snapshot, not a live feed, so check the official code before relying on it.

Text

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 97-NM-314-AD; Amendment 39-10277; AD 98-01-15]

RIN 2120-AA64

Airworthiness Directives; Airbus Model A330 and A340 Series

Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: This amendment adopts a new airworthiness directive (AD),

applicable to certain Airbus Model A330 and A340 series airplanes. This

action requires repetitive operational tests of the override mechanism

of the trimmable horizontal stabilizer (THS) to determine if the system

functions correctly; and corrective action, if necessary. This

amendment is prompted by the issuance of mandatory continuing

airworthiness information by a foreign civil airworthiness authority.

The actions specified in this AD are intended to prevent uncommanded

movement of the THS, which could result in reduced controllability of

the airplane.

DATES: Effective January 28, 1998.

The incorporation by reference of certain publications listed in

the regulations is approved by the Director of the Federal Register as

of January 28, 1998.

Comments for inclusion in the Rules Docket must be received on or

before February 12, 1998.

ADDRESSES: Submit comments in triplicate to the Federal Aviation

Administration (FAA), Transport Airplane Directorate, ANM-114,

Attention: Rules Docket No. 97-NM-314-AD, 1601 Lind Avenue, SW.,

Renton, Washington 98055-4056.

The service information referenced in this AD may be obtained from

Airbus Industrie, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex,

France. This information may be examined at the FAA, Transport Airplane

Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the

Office of the Federal Register, 800 North Capitol Street, NW., suite

700, Washington, DC.

FOR FURTHER INFORMATION CONTACT: Norman B. Martenson, Manager,

International Branch, ANM-116, FAA, Transport Airplane Directorate,

1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425)

227-2110; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: The Direction Generale de l'Aviation Civile

(DGAC), which is the airworthiness authority for France, recently

notified the FAA that an unsafe condition may exist on certain Airbus

Model A330 and A340 series airplanes. The DGAC advises that results of

simulator testing have indicated that uncommanded movement of the

trimmable horizontal stabilizer (THS) can occur, if the manual override

switch fails in the open position and the THS control wheel is blocked

by either the pilot or a mechanical control jam. Such uncommanded

movement of the THS, if not corrected, could result in reduced

controllability of the airplane.

Explanation of Relevant Service Information

Airbus has issued Service Bulletins A330-27-3051 (for Model A330

series

airplanes) and A340-27-4058 (for Model A340 series airplanes), both

dated February 13, 1997. These service bulletins describe procedures

for repetitive operational tests of the override mechanism of the THS

to determine if the system functions correctly. The service bulletins

also describe procedures for repair, if necessary. The DGAC classified

these service bulletins as mandatory and issued French airworthiness

directives 97-064-044(B)R2 and 97-065-055(B)R2, both dated November 5,

1997, in order to assure the continued airworthiness of these airplanes

in France.

FAA's Conclusions

These airplane models are manufactured in France and are type

certificated for operation in the United States under the provisions of

section 21.29 of the Federal Aviation Regulations (14 CFR 21.19) and

the applicable bilateral airworthiness agreement. Pursuant to this

bilateral airworthiness agreement, the DGAC has kept the FAA informed

of the situation described above. The FAA has examined the findings of

the DGAC, reviewed all available information, and determined that AD

action is necessary for products of this type design that are

certificated for operation in the United States.

Explanation of Requirements of the Rule

Since an unsafe condition has been identified that is likely to

exist or develop on other airplanes of the same type design registered

in the United States, this AD requires accomplishment of the actions

specified in the service bulletins described previously, except as

described below.

Differences Between this AD and the Service Information

Operators should note that, unlike the procedures described in the

referenced service bulletins and French airworthiness directives, this

AD does not address compliance times for affected airplanes used in

training because the anticipated use of these airplanes in the United

States does not include training.

Interim Action

This is considered to be interim action until final action is

identified, at which time the FAA may consider further rulemaking.

Cost Impact

None of the airplanes affected by this action is on the U.S.

Register. All airplanes included in the applicability of this rule

currently are operated by non-U.S. operators under foreign registry;

therefore, they are not directly affected by this AD action. However,

the FAA considers that this rule is necessary to ensure that the unsafe

condition is addressed in the event that any of these subject airplanes

are imported and placed on the U.S. Register in the future.

Should an affected airplane be imported and placed on the U.S.

Register in the future, it would require approximately 1 work hour to

accomplish the required actions, at an average labor rate of $60 per

work hour. Based on these figures, the cost impact of this AD would be

$60 per airplane.

Determination of Rule's Effective Date

Since this AD action does not affect any airplane that is currently

on the U.S. register, it has no adverse economic impact and imposes no

additional burden on any person. Therefore, prior notice and public

procedures hereon are unnecessary and the amendment may be made

effective in less than 30 days after publication in the Federal

Register.

Comments Invited

Although this action is in the form of a final rule and was not

preceded by notice and opportunity for public comment, comments are

invited on this rule. Interested persons are invited to comment on this

rule by submitting such written data, views, or arguments as they may

desire. Communications shall identify the Rules Docket number and be

submitted in triplicate to the address specified under the caption

ADDRESSES. All communications received on or before the closing date

for comments will be considered, and this rule may be amended in light

of the comments received. Factual information that supports the

commenter's ideas and suggestions is extremely helpful in evaluating

the effectiveness of the AD action and determining whether additional

rulemaking action would be needed.

Comments are specifically invited on the overall regulatory,

economic, environmental, and energy aspects of the rule that might

suggest a need to modify the rule. All comments submitted will be

available, both before and after the closing date for comments, in the

Rules Docket for examination by interested persons. A report that

summarizes each FAA-public contact concerned with the substance of this

AD will be filed in the Rules Docket.

Commenters wishing the FAA to acknowledge receipt of their comments

submitted in response to this rule must submit a self-addressed,

stamped postcard on which the following statement is made: ``Comments

to Docket Number 97-NM-314-AD.'' The postcard will be date stamped and

returned to the commenter.

Regulatory Impact

The regulations adopted herein will not have substantial direct

effects on the States, on the relationship between the national

government and the States, or on the distribution of power and

responsibilities among the various levels of government. Therefore, in

accordance with Executive Order 12612, it is determined that this final

rule does not have sufficient federalism implications to warrant the

preparation of a Federalism Assessment.

For the reasons discussed above, I certify that this action (1) is

not a ``significant regulatory action'' under Executive Order 12866;

(2) is not a ``significant rule'' under DOT Regulatory Policies and

Procedures (44 FR 11034, February 26, 1979); and (3) will not have a

significant economic impact, positive or negative, on a substantial

number of small entities under the criteria of the Regulatory

Flexibility Act. A final evaluation has been prepared for this action

and it is contained in the Rules Docket. A copy of it may be obtained

from the Rules Docket at the location provided under the caption

ADDRESSES.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by

reference, Safety.

Adoption of the Amendment

Accordingly, pursuant to the authority delegated to me by the

Administrator, the Federal Aviation Administration amends part 39 of

the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

Sec. 39.13 [Amended]

2. Section 39.13 is amended by adding the following new

airworthiness directive:

98-01-15 Airbus Industrie: Amendment 39-10277. Docket 97-NM-314-AD.

Applicability: Model A330-301, -321, -322, -341, and -342 series

airplanes on which Airbus Modification 45631 has not been installed;

and Model A340-211, -212, -213, -311, -312, and -313 series

airplanes

on which Airbus Modification 45485 has not been installed;

certificated in any category.

Note 1: This AD applies to each airplane identified in the

preceding applicability provision, regardless of whether it has been

otherwise modified, altered, or repaired in the area subject to the

requirements of this AD. For airplanes that have been modified,

altered, or repaired so that the performance of the requirements of

this AD is affected, the owner/operator must request approval for an

alternative method of compliance in accordance with paragraph (b) of

this AD. The request should include an assessment of the effect of

the modification, alteration, or repair on the unsafe condition

addressed by this AD; and, if the unsafe condition has not been

eliminated, the request should include specific proposed actions to

address it.

Compliance: Required as indicated, unless accomplished

previously.

To prevent uncommanded movement of the trimmable horizontal

stabilizer (THS), which could result in reduced controllability of

the airplane, accomplish the following:

(a) Within 500 flight hours after the effective date of this AD,

perform an operational test of the THS override mechanism to

determine if the override system functions correctly, in accordance

with paragraph (a)(1) or (a)(2) of this AD, as applicable. Repeat

the operational test thereafter at intervals not to exceed 500

flight hours.

(1) For Model A330 series airplanes: Perform the operational

test in accordance with Airbus Service Bulletin A330-27-3051, dated

February 13, 1997; and, prior to further flight, repair any

discrepancy in accordance with this service bulletin.

(2) For Model A340 series airplanes: Perform the operational

test in accordance with Airbus Service Bulletin A340-27-4058, dated

February 13, 1997; and, prior to further flight, repair any

discrepancy in accordance with this service bulletin.

(b) An alternative method of compliance or adjustment of the

compliance time that provides an acceptable level of safety may be

used if approved by the Manager, International Branch, ANM-116, FAA,

Transport Airplane Directorate. Operators shall submit their

requests through an appropriate FAA Principal Maintenance Inspector,

who may add comments and then send it to the Manager, International

Branch, ANM-116.

Note 2: Information concerning the existence of approved

alternative methods of compliance with this AD, if any, may be

obtained from the International Branch, ANM-116.

(c) Special flight permits may be issued in accordance with

sections 21.197 and 21.199 of the Federal Aviation Regulations (14

CFR 21.197 and 21.199) to operate the airplane to a location where

the requirements of this AD can be accomplished.

(d) The actions required by this AD shall be done in accordance

with Airbus Service Bulletin A330-27-3051, dated February 13, 1997

(for Model A330 series airplanes); or A340-27-4058, dated February

13, 1997 (for Model A340 series airplanes); as applicable. This

incorporation by reference was approved by the Director of the

Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part

51. Copies may be obtained from Airbus Industrie, 1 Rond Point

Maurice Bellonte, 31707 Blagnac Cedex, France. Copies may be

inspected at the FAA, Transport Airplane Directorate, 1601 Lind

Avenue, SW., Renton, Washington; or at the Office of the Federal

Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

Note 3: The subject of this AD is addressed in French

airworthiness directives 97-064-044(B)R2 and 97-065-055(B)R2, both

dated November 5, 1997.

(e) This amendment becomes effective on January 28, 1998.

Issued in Renton, Washington, on December 31, 1997.

Darrell M. Pederson,

Acting Manager, Transport Airplane Directorate, Aircraft Certification

Service.

[FR Doc. 98-312 Filed 1-12-98; 8:45 am]

BILLING CODE 4910-13-U

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.