Approval of Federal Information Processing Standards Publication 177-1, Initial Graphics Exchange Specification (IGES)

Federal RegisterApr 23, 1996

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF COMMERCE

National Institute of Standards and Technology

[Docket No. 960212025-6025-01]

RIN 0693-XX14

Approval of Federal Information Processing Standards Publication

177-1, Initial Graphics Exchange Specification (IGES)

AGENCY: National Institute of Standards and Technology (NIST),

Commerce.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The purpose of this notice is to announce that the Secretary

of Commerce has approved a revision of Federal Information Processing

Standard (FIPS) 177, Initial Graphics Exchange Specification (IGES),

which will be published as FIPS Publication 177-1. This revision adopts

the American National Standard Digital Representation for Communication

of Product Definition Data, ANSI/US PRO/IPO (United States Product Data

Association/IGES PDES Organization)-100-1993, Version 5.2, and the

specified application protocols. FIPS PUB 177-1 addresses IGES

implementation and data file acquisition, interpretation, and

conformance.

On April 12, 1995, notice was published in the Federal Register (60

FR 18583-18586) that a revision of Federal Information Processing

Standard (FIPS) 177, Initial Graphics Exchange Specification (IGES),

was being proposed for Federal use.

The written comments submitted by interested parties and other

material available to the Department relevant to this standard were

reviewed by NIST. On the basis of this review, NIST recommended that

the Secretary approve the revised standard as Federal Information

Processing Standards Publication (FIPS PUB) 177-1, and prepared a

detailed justification document for the Secretary's review in support

of that recommendation.

The detailed justification document which was presented to the

Secretary, and which includes an analysis of the written comments

received, is part of the public record and is available for inspection

and copying in the Department's Central Reference and Records

Inspection Facility, Room 6020, Herbert C. Hoover Building, 14th Street

between Pennsylvania and Constitution Avenues, NW, Washington, DC

20230.

This FIPS contains two sections: (1) an announcement section, which

provides information concerning the applicability, implementation, and

maintenance of the standard; and (2) a specifications section, which

deals with the technical requirements of the standard. Only the

announcement section of the standard is provided in this notice.

EFFECTIVE DATE: This revised standard becomes effective November 1,

1996.

ADDRESSES: Interested parties may purchase copies of this revised

standard, including the technical specifications section, from the

National Technical Information Service (NTIS). Specific ordering

information from NTIS for this standard is set out in the Where to

Obtain Copies Section of the announcement section of the standard.

FOR FURTHER INFORMATION CONTACT: Ms Lynne Rosenthal, telephone (301)

975-3353, National Institute of Standards and Technology, Gaithersburg,

MD 20899.

Dated: April 16, 1996.

Samuel Kramer,

Associate Director.

Federal Information Processing Standards Publication 177-1

Announcing the Standard for Initial Graphics Exchange Specification

(IGES)

Federal Information Processing Standards Publications (FIPS PUBS)

are issued by the National Institute of Standards and Technology (NIST)

after approval by the Secretary of Commerce pursuant to Section 5131 of

the Information Technology Management Reform Act of 1996 and the

Computer Security Act of 1987, Public Law 104-106.

1. Name of Standard. Initial Graphics Exchange Specification (IGES)

(FIPS PUB 177-1).

2. Category of Standard. Software Standard; Graphics and

Information Interchange.

3. Explanation. This publication is a revision of the FIPS PUB 177

and supersedes FIPS PUB 177 in its entirety. It provides a substantial,

upward-compatible enhancement of IGES Version 4.0. FIPS PUB 177-1

specifies new conformance requirements, the addition and use of

application protocols (APs), and increased enhancement, correction, and

clarification of the existing specification. It does not contain any

new requirements that would make an

[[Page 17877]]

existing conforming implementation nonconforming.

FIPS PUB 177-1 adopts the American National Standard Digital

Representation for Communication of Product Definition Data, ANSI/US

PRO/IPO (United States Product Data Association/IGES PDES

Organization)-100-1993, Version 5.2, and the specified application

protocols. FIPS PUB 177-1 addresses IGES implementation and data file

acquisition, interpretation, and conformance.

The purpose of the FIPS for IGES is to enable the compatible

exchange of product definition data used by dissimilar computer-aided

design and computer-aided manufacturing (CAD/CAM) systems. Utilizing a

neutral database format the IGES processor can create or translate two-

dimensional (2-D) or three-dimensional (3-D) vector-based digital

product model data. The standard specifies file structure and

syntactical definition, and defines the representation of geometric,

topological, and nongeometric product definition data. The exact

specification is in Section 10 of this standard.

4. Approving Authority. Secretary of Commerce.

5. Maintenance Agency. U.S. Department of Commerce, National

Institute of Standards and Technology (NIST), Computer Systems

Laboratory (CSL).

6. Cross Index.

a. American National Standard Digital Representation for

Communication of Product Definition Data, ANSI/US PRO/IPO-100-1993,

Version 5.2.

b. American Society of Mechanical Engineers/American National

Standards Institute (ASME/ANSI) Y14.26M-1989, Digital Representation

for Communication of Product Definition Data, IGES Version 4.0.

c. MIL-D-28000A, Continuous Acquisition and Life-Cycle Support

Specification, Digital Representation for Communication of Product

Definition Data: IGES Application Subsets and IGES Application

Protocols, February 10, 1992.

d. American National Standard, 3-D Piping IGES Application

Protocol, ANSI/US PRO/IPO-110-1994.

e. IGES Layered Electrical Product Application Protocol, Committee

Draft SAND94-2375, December 1, 1994.

7. Related Documents.

a. Federal Information Resources Management Regulations (FIRMR)

subpart 201.20.303, Standards, and subpart 201.39.1002, Federal

Standards.

b. Federal ADP and Telecommunications Standards Index, U.S. General

Services Administration, Information Technology Management Service,

October 1994 (updated periodically).

c. FIPS PUB 29-3, Interpretation Procedures for Federal Information

Processing Standards for Software.

d. NISTIR 4379, IGES Technical Illustrations Application Guide.

e. NISTIR 4600, IGES 5.0 Recommended Practices Guide.

f. NISTIR 5541, Initial Graphics Exchange Specification (IGES):

Procedures for the NIST IGES Validation Test Service.

g. MIL-T-31000, General Specification for Technical Data Packages.

8. Objectives. Federal standards for electronic interchange permit

Federal departments and agencies to exercise more effective control

over the production, management, and use of the government's

information resources. The primary objectives specific to IGES are to:

--Reduce the overall life-cycle cost for digital systems by

establishing a common exchange format that allows for the transfer of

product definition data across organizational boundaries and

independent of any particular CAD/CAM system.

--Exchange digital representations of product definition data in

various forms: illustrations, 2-D drawings, 3-D edge-vertex models,

surface models, solid models, and complete product models.

--Provide CAD/CAM implementation manufacturers with a guideline for

identifying useful combinations of product definition data capabilities

in any CAD/CAM system.

--Specify APs that can be used by Federal departments and agencies to

support the exchange of product data when applicable.

9. Applicability.

9.1 This FIPS for IGES is intended for the computer-interpretable

representation and exchange of CAD/CAM product definition data among

applications and programs that are either developed or acquired or

developed by a Federal agency shall include an IGES preprocessor and

IGES postprocessor capability. FIPS for IGES is designed to support the

exchange of 2-D or 3-D product definition data with rich attributable

information. It provides a data format for describing product design

and manufacturing information that has been created and stored in a

computer-readable, device independent form.

9.2. The FIPS for IGES shall be used when one or more of the

following situations exist:

--The product definition application or program is under constant

review, and changes may result frequently.

--It is anticipated that the life of the data files will be longer than

the life of the presently utilized CAD/CAM system.

--The application is being designed centrally for a decentralized

system that may employ computers of different makes and models and

different CAD/CAM devices.

--The product definition application may run on equipment other than

that on which it was developed.

--The product definition data is to be used and maintained by other

than the original designer.

--The product definition data is or is likely to be used by

organizations outside the Federal Government.

--It is desired to have the design understood by multiple people,

groups, or organizations.

For layered electrical product technology, three dimensional

piping, and engineering drawing applications, the use of the

appropriate AP or subset (as described below) is required for

implementation of this FIPS IGES.

An AP or subset provides a means to improve the fidelity of the

product data exchanged. APs are developed by domain experts for the

purpose of defining the processes, information flows, and functional

requirements of an application. An AP defines the scope, context,

information requirements, representation of the application

information, and conformance requirements. Initial release of this FIPS

for IGES publication includes two APs and one application subset.

--Layered Electrical Product (LEP) Application Protocol: The LEP AP is

used for the transference of 2-D electrical and electro-mechanical

product models. This AP is required for layered electrical products

technology applications, including specification control drawings,

circuitry, fabrication and final assembly of a layered product system.

--3-D Piping Application Protocol: The 3-D Piping AP is used for the

exchange of models from one piping modeling application to another.

This AP is required for 3-D piping and related equipment models,

including the fabrication and assembly of piping systems (e.g. pipe,

pipe fittings, attached equipment, piping supports, and insulation).

--Engineering Drawing (Class II) Subset (MIL-D-28000A): The Class II

subset is used for the exchange of the drawing model; including

geometric and annotation entities, attributes

[[Page 17878]]

such as color and line fonts, and organization information such as

levels and subfigures. This subset is required for the exchange of

engineering drawings and product data following MIL-T-31000 (General

Specification for Technical Data Packages).

10. Specifications. This FIPS adopts ANSI/US PRO/IPO-100-1993 and

the specified APs: Layered Electrical Product (LEP) Application

Protocol; 3-D Piping Application Protocol; and Engineering Drawing

(Class II) Subset (MIL-D-28000A). The ANSI/US PRO/IPO-100-1993 standard

for IGES, defines the communications file structure and format (i.e., a

file of entitles), language format, and the representation of product

definition data.

New entities and constructs are added with each revision and are

upwardly compatible. Thus, processor conforming to IGES Version 5.2

would be able to read and process an IGES Version 4.0 file, but the

converse may not be true. The capabilities brought to the IGES user

implementing the IGES Version 5.2 standard are:

--A new character set for the European Community;

--additional properties to the attribute table for Architecture/

Engineering/Construction (AEC);

--the addition of a new form of the drawing entity; and

--the addition of a new class of entity use, termed construction

information.

Conformance Requirements. Conformance is mandatory for this

standard and is applicable to all Federal department and agency

procurements. Conforming data files and processors mush adhere to all

the rules appropriate to specific features, such as entities, defines

within ANSI/US PRO/IPO-100-1993 and when applicable, one of the APs or

subset identified in this standard. Vendors of processors claiming

conformance to this standard shall complete documentation which

accurately indicates the processor's support of, and mapping between,

native and IGES entities.

A conforming preprocessor shall create conforming IGES data files

which represent the native database which was input to the

preprocessor. File content shall represent the native entities

according to the vendor's completed documentation. Unsupported native

entities shall be reported.

A conforming postprocessor shall be capable of reading any

complying data file without halting or aborting, including data files

containing unprocessible entitles. All unprocessible entities shall be

ignored. A conforming postprocessor shall translate conforming IGES

data files into the native database form of a specific CAD/CAM system.

It shall convert each supported entity into native constructs, which

preserve the functionality and match the geometry, attributes, and

relationships of the IGES entity in the file. The postprocessor shall

report on any IGES entities or features which have been discarded.

Any visual presentation of supported, displayable entities that is

produced by the processor, shall represent a visual appearance

equivalent to the examples appearing in ANSI/US PRO/IPO-100-1993 and,

if applicable, the AP or subset. The visual appearance shall depict the

functional intent of the database.

Conformance Rules for Application Protocols and Subsets. An

application protocol or subset which claims conformance to this

standard, must satisfy the following rule:

--An implementation conforming to an AP shall satisfy the conformance

requirements specified in the AP as well as the conformance

requirements in the ANSI/US PRO/IPO-100-1993 specification.

11. Implementation. The implementation of this standard involves

four areas of consideration: effective date, acquisition,

interpretation, and validation.

11.1 Effective Date. This publication is effective November 1,

1996. A transition period of twelve (12) months, beginning on the

effective date, allows industry to produce IGES implementations and

data files conforming to this standard. Agencies are encouraged to use

this standard for solicitation proposals during the transition period.

This standard is mandatory for use in all solicitation proposals for

IGES data files and implementations (i.e., computer-aided design and

manufacturing systems) acquired twelve (12) months after the effective

date.

11.2 Acquisition of IGES Implementations and Data Files.

Conformance to this standard should be considered whether the CAD/CAM

systems are developed internally, acquired as part of a system

procurement, acquired by separate procurement, used under a leasing

agreement, or specified for use in contracts for programming services.

Recommended terminology for procurement of FIPS IGES is contained in

the U.S. General Services Administration publication Federal ADP and

Telecommunications Standards Index, Chapter 5, Part 1.

11.3 Interpretation of FIPS IGES. Resolutions of questions

regarding this standard will be provided by NIST. Procedures for

interpretations are specified in FIPS PUB 29-3. All questions

concerning the specifications and content should be addressed to:

Director, Computer Systems Laboratory, ATTN: FIPS IGES Interpretation,

Building 820, Room 562, National Institute of Standards and Technology,

Gaithersburg, MD 20899.

11.4 Validation of IGES Implementations. Validation of IGES

implementations is not mandatory at this time. Testing of an

implementation's conformance to this FIPS IGES will be optional by the

agency. Government agencies acquiring implementations in accordance

with this standard may wish to require testing for conformance,

interoperability, and performance. The tests to be administered and the

testing organization are at the discretion of the agency Acquisition

Authority.

12. Waivers. Under certain exceptional circumstances, the heads of

Federal departments and agencies may approve waivers to Federal

Information Processing Standards (FIPS). The head of such agency may

redelegate such authority only to a senior official designated pursuant

to section 3506(b) of Title 44, U.S. Code. Waivers shall be granted

only when:

a. Compliance with a standard would adversely affect the

accomplishment of the mission of an operator of a Federal computer

system, or

b. Cause a major adverse financial impact on the operator which is

not offset by Governmentwide savings.

Agency heads may act upon a written waiver request containing the

information detailed above. Agency heads may also act without a written

waiver request when they determine that conditions for meeting the

standard cannot be met. Agency heads may approve waivers only by a

written decision which explains the basis on which the agency head made

the required finding(s). A copy of each such decision, with procurement

sensitive or classified portions clearly identified, shall be sent to:

National Institute of Standards and Technology; ATTN: FIPS Waiver

Decisions, Building 820, Room 509; Gaithersburg, MD 20899.

In addition, notice of each waiver granted and each delegation of

authority to approve waivers shall be sent promptly to the Committee on

Government Operations of the House of Representatives and the Committee

on Governmental Affairs of the Senate and shall be published promptly

in the Federal Register.

[[Page 17879]]

When the determination on a waiver applies to the procurement of

equipment and/or services, a notice of the waiver determination must be

published in the Commerce Business Daily as a part of the notice of

solicitation for offers of an acquisition or, if the waiver

determination is made after that notice is published, by amendment to

such notice.

A copy of the waiver, any supporting documents, the document

approving the waiver and any supporting and accompanying documents,

with such deletions as the agency is authorized and decides to make

under 5 U.S.C. Sec. 552(b), shall be part of the procurement

documentation and retained by the agency.

13. Where to Obtain Copies. Copies of this publication are for sale

by the National Technical Information Service, U.S. Department of

Commerce, Springfield, VA 22161. (Sale of the included specifications

document is by arrangement with the National Computer Graphics

Association and the American National Standards Institute.) When

ordering, refer to Federal Information Processing Standards Publication

177-1 (FIPSPUB177-1), and title. Payment may be made by check, money

order, or NTIS deposit account.

[FR Doc. 96- 9941 Filed 4-22-96; 8:45 am]

BILLING CODE 3510-CN-M

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.