Antifriction Bearings and Parts Thereof From France, Germany, Italy, Japan, Singapore, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Rescission of Administrative Reviews in Part, and Determination To Revoke Order in Part

DEPARTMENT OF COMMERCE

International Trade Administration

[A-427-801, A-428-801, A-475-801, A-588-804, A-559-801, A 412-801]

Antifriction Bearings and Parts Thereof From France, Germany, Italy, Japan, Singapore, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Rescission of Administrative Reviews in Part, and Determination To Revoke Order in Part

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On February 9, 2004, the Department of Commerce published the preliminary results of the administrative reviews of the antidumping duty orders on ball bearings and parts thereof from France, Germany, Italy, Japan, Singapore and the United Kingdom and of the antidumping duty order on spherical plain bearings and parts thereof from France. The reviews cover 173 manufacturers/exporters. The period of review is May 1, 2002, through April 30, 2003.

Based on our analysis of the comments received, we have made changes, including corrections of certain programming and other clerical errors, in the margin calculations. Therefore, the final results differ from the preliminary results. The final weighted-average dumping margins for the reviewed firms are listed below in the section entitled “Final Results of the Reviews.”

DATES:

Effective September 15, 2004.

FOR FURTHER INFORMATION:

The Department of Commerce (the Department) received numerous requests for reviews of companies under multiple orders. Please contact the appropriate analyst as outlined in the following chart at AD/CVD Enforcement, Office 5, Import Administration, International Trade Administration, U.S. Department of Commerce, Washington, DC 20230; telephone: (202) 482-4733.

Company

Country

Analyst

Ace Bearing and Transmission Co

France, Germany, Italy

Edythe Artman.

Acorn Industrial Service Limited

France, Germany, Italy

Jeffrey Frank.

Aeroengine Bearings U.K.

United Kingdom

Catherine Cartsos.

Aktif Endustrie Malzemeleri

France, Germany, Italy

Lyn Johnson.

Alphateam SPRL

France, Germany, Italy

Catherine Cartsos.

Asahi Seiko Co., Ltd.

Japan

Thomas Schauer.

Australian Bearing Pty Ltd.

France, Germany, Italy

Dmitry Vladimirov.

Baltic Bearing Supply

France, Germany, Italy

Yang Jin Chun.

Barden/FAG

United Kingdom

Jeffrey Frank.

Bearing and Tool GmbH

France, Germany, Italy

Catherine Cartsos.

Bearing Discount International GmbH

France, Germany, Italy

Fred Aziz.

Bearing Dynamics

France, Germany, Italy

Janis Kalnins.

Bearing Net

France, Germany, Italy

Susan Lehman.

Bearing Sales Corporation

France, Germany, Italy

Jeffrey Frank.

BTM Bearing Trade F.C. Miltner

France, Germany, Italy, United Kingdom

Hermes Pinilla.

Cantoni and C.S.N.C.

France, Germany, Italy

Susan Lehman.

CCVI Bearing Company

France, Germany, Italy

Kristin Case.

Comal SNC

France, Germany, Italy

Dmitry Vladimirov.

DCD Corporation

France, Germany, Italy

Dunyako Ahmadu.

EuroLatin Ex. Services

France, Germany, Italy

Susan Lehman.

Ever-on Corporation (formerly Taisho Kiko Co. Ltd.)

France, Germany, Italy

Kristin Case.

FAG Italia S.p.A.

Italy

Minoo Hatten.

Fair Friend Ent. Co. Ltd.

France, Germany, Italy

Kristin Case.

Friedrich Picard GmbH

France, Germany, Italy

Susan Lehman.

Frohlich and Dorken GmbH

France, Germany, Italy

Jeffrey Frank.

Han Sol Tech Corp./Yoo Shin Co.

France, Germany, Italy

Janis Kalnins.

Hayley Import/Export

France, Germany, Italy

Yang Jin Chun.

Heinz Knust

France, Germany, Italy

Catherine Cartsos.

Hergenhan GmbH

France, Germany, Italy

Catherine Cartsos.

Hoens Industrieel BV

France, Germany, Italy

Dmitry Vladimirov.

IBD Ltd.

France, Germany, Italy

Edythe Artman.

INA Schaeffer KG and FAG Kugelfischer Georg Schaefer AG (INA/FAG)

Germany

Susan Lehman/Dmitry Vladmirov.

International Bearing Pte. Ltd.

France, Germany, Italy

Susan Lehman.

Interspecies Donath GmbH

France, Germany, Italy

Lyn Johnson.

Italcuscinetti Group

France, Germany, Italy

Dunyako Ahmadu.

Kian Ho Bearings, Ltd.

France, Germany, Italy

Edythe Artman.

KIS Antriebs Technik GmbH

France, Germany, Italy

Dunyako Ahmadu.

Koyo Seiko Co., Ltd.

Japan

Tom Schauer.

KSM, Minamiguchi/Bearing MFG. Co

France, Germany, Italy

Lyn Johnson.

LTM Industrietechnik

France, Germany, Italy

Dmitry Vladimirov.

M. Buchhalter Maschenmode/Hergenhan

France, Germany, Italy

Yang Jin Chun.

Micaknowledge

France, Germany, Italy

Catherine Cartsos.

Minetti SpA

France, Germany, Italy

Fred Aziz.

Ming Hing Trading Company

France, Germany, Italy

Janis Kalnins.

Motion Bearing Pte. Ltd.

France, Germany, Italy

Susan Lehman.

Nankai Seiko

Japan

Catherine Cartsos.

NMB/Pelmec

Singapore

Yang Jin Chun.

Nippon Pillow Block Sales (NPBS)

Japan

Yang Jin Chun.

NSK Ltd. (NSK)

Japan

Dunyako Ahmadu.

NTN Corp. (NTN)

Japan

Hermes Pinilla.

Osaka Pump Co. Ltd.

Japan

Edythe Artman.

Paul Mueller

Germany

Dave Dirstine.

Ringball Corporation

France, Germany, Italy

Dave Dirstine.

Rodamietos Rovi

France, Germany, Italy

Jeffrey Frank.

Roeirasa

France, Germany, Italy

Susan Lehman.

Rolling Bearing Co. Pty. Ltd.

France, Germany, Italy

Kristin Case.

Rovi-Marcay

France, Germany, Italy

Tom Schauer.

Rovi-Valencia

France, Germany, Italy

Minoo Hatten.

Sapporo Precision Bearings, Inc. (Sapporo)

Japan

Jeffrey Frank.

SKF France S.A. and Sarma

France

Dunyako Ahmadu.

SKF GmbH

Germany

Kristin Case.

SKF Industrie S.p.A.

Italy

Dunyako Ahmadu.

SKF (U.K.) Ltd.

United Kingdom

Kristin Case.

SNR Roulements

France

Fred Aziz.

Sprint Engineering

France, Germany, Italy

Susan Lehman.

Takeshita Seiko Co. Ltd.

Japan

Janis Kalnins.

Taninaka Ltd.

France, Germany, Italy

Susan Lehman.

Timken

Germany

Kristin Case.

Top G Trading Pte Ltd.

France, Germany, Italy

Catherine Cartsos.

Weber Kugellager International

France, Germany, Italy

Fred Aziz.

Withus Technology Corp.

France, Germany, Italy

Janis Kalnins.

Wyko Export

France, Germany, Italy

Yang Jin Chun.

SUPPLEMENTARY INFORMATION:

Background

On February 9, 2004, the Department published the preliminary results of the administrative reviews of the antidumping duty orders on antifriction bearings and parts thereof (antifriction bearings) from France, Germany, Italy, Japan, Singapore, and the United Kingdom (69 FR 5949) (

Preliminary Results for France, et al.

). The period of review (POR) is May 1, 2002, through April 30, 2003. We invited interested parties to comment on the preliminary results. At the request of certain parties, we held hearings for Japan-specific issues on May 21, 2004, and for general issues on June 25, 2004. On May 3, 2004, and August 12, 2004, the Department published notices extending the date for issuing the final results of these reviews.

See Antifriction Bearings and Parts Thereof From France, Germany, Italy, Japan, Singapore, and the United Kingdom: Extension of Time Limit for Final Results of Antidumping Duty Administrative Reviews

, 69 FR 24121 and 69 FR 49861, respectively. The Department has conducted these administrative reviews in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).

Scope of Reviews

The products covered by these reviews are antifriction bearings (other than tapered roller bearings) and parts thereof (AFBs) and constitute the following merchandise:

1.

Ball Bearings and Parts Thereof:

These products include all AFBs that employ balls as the rolling element. Imports of these products are classified under the following categories: Antifriction balls, ball bearings with integral shafts, ball bearings (including radial ball bearings) and parts thereof, and housed or mounted ball bearing units and parts thereof.

Imports of these products are classified under the following

Harmonized Tariff Schedules

(HTSUS) subheadings: 3926.90.45, 4016.93.00, 4016.93.10, 4016.93.50, 6909.19.5010, 8431.20.00, 8431.39.0010, 8482.10.10, 8482.10.50, 8482.80.00, 8482.91.00, 8482.99.05, 8482.99.2580, 8482.99.35, 8482.99.6595, 8483.20.40, 8483.20.80, 8483.50.8040, 8483.50.90, 8483.90.20, 8483.90.30, 8483.90.70, 8708.50.50, 8708.60.50, 8708.60.80, 8708.70.6060, 8708.70.8050, 8708.93.30, 8708.93.5000, 8708.93.6000, 8708.93.75, 8708.99.06, 8708.99.31, 8708.99.4960, 8708.99.50, 8708.99.5800, 8708.99.8080, 8803.10.00, 8803.20.00, 8803.30.00, 8803.90.30, and 8803.90.90.

2.

Spherical Plain Bearings, Mounted and Unmounted, and Parts Thereof:

These products include all spherical plain bearings that employ a spherically-shaped sliding element and include spherical plain rod ends.

Imports of these products are classified under the following HTS subheadings: 3926.90.45, 4016.93.00, 4016.93.10, 4016.93.50, 6909.50.10, 8483.30.80, 8483.90.30, 8485.90.00, 8708.93.5000, 8708.99.50, 8803.10.00, 8803.20.00, 8803.30.00, 8803.90.30, and 8803.90.90.

Although the HTSUS item numbers above are provided for convenience and customs purposes, written descriptions of the scope of these proceedings remain dispositive.

The size or precision grade of a bearing does not influence whether the bearing is covered by one of the orders. These orders cover all the subject bearings and parts thereof (inner race, outer race, cage, rollers, balls, seals, shields, etc.) outlined above with certain limitations. With regard to finished parts, all such parts are included in the scope of the these orders. For unfinished parts, such parts are included if (1) they have been heat-treated, or (2) heat treatment is not required to be performed on the part. Thus, the only unfinished parts that are not covered by these orders are those that will be subject to heat treatment after importation. The ultimate application of a bearing also does not influence whether the bearing is covered by the orders. Bearings designed for highly specialized applications are not excluded. Any of the subject bearings, regardless of whether they may ultimately be utilized in aircraft, automobiles, or other equipment, are within the scope of these orders.

For a listing of scope determinations which pertain to the orders, see the Memorandum from the Antifriction Bearings Team to Laurie Parkhill regarding the placement of scope information from the 2001-02 administrative review record on the record of these administrative reviews, dated January 14, 2004. This memorandum is on file in the Central Records Unit (CRU), Main Commerce Building, Room B-099, in the General Issues record (A-100-001) for the 02/03 reviews.

Analysis of the Comments Received

All issues raised in the case and rebuttal briefs by parties to the concurrent administrative reviews of the orders on antifriction bearings are addressed in the “Issues and Decision Memorandum” (Decision Memo) from Jeffrey May, Deputy Assistant Secretary,

to James Jochum, Assistant Secretary, dated September 8, 2004, which is hereby adopted by this notice. A list of the issues which parties have raised and to which we have responded, all of which are in the Decision Memo, is attached to this notice as an Appendix. This Decision Memo, which is a public document, is on file in the Central Records Unit (CRU), Main Commerce Building, Room B-099, and is accessible on the Web at

http://ia.ita.doc.gov/frn/index.html

. The paper copy and electronic version of the Decision Memo are identical in content.

Sales Below Cost in the Home Market

The Department disregarded home-market sales that failed the cost-of-production test for the following firms for these final results of reviews:

Country

Company

Class or kind of merchandise

France

SKF

Ball.

Germany

SKF, Paul Mueller, and INA/FAG

Ball.

Italy

FAG, SKF

Ball.

Japan

Asahi Seiko, Koyo, NSK, NPBS, and NTN

Ball.

Singapore

NMB/Pelmec

Ball.

United Kingdom

Barden

Ball.

Use of Adverse Facts Available

Section 776(b) of the Act provides that, if the Department finds that an interested party “has failed to cooperate by not acting to the best of its ability to comply with a request for information,” the Department may use information that is adverse to the interests of that party as facts otherwise available.

Section 776(b) of the Act further provides that the Department may use as adverse facts available information derived from the petition, a final determination in an antidumping investigation, any previous review, or any other information placed on the record. The statute does not provide a clear obligation or preference for relying on a particular source in choosing information to use as adverse facts available, but the Department may use as facts available a final determination in a less-than-fair-value proceeding even if the less-than-fair-value determination is based on the best information available.

See Certain Cut-to-Length Carbon Steel Plate from Sweden: Final Results of Administrative Review

, 62 FR 18396, 18402 (April 15, 1997), and

Certain Cut-to-Length Carbon Steel Plate from Mexico: Preliminary Results of Antidumping Duty Administrative Review

, 63 FR 48181, 48183 (September 9, 1998).

In the

Preliminary Results for France, et al.

, we determined that the use of facts available as the basis for the weighted-average dumping margin was appropriate for the following companies:

Ace Bearing and Tool (France, Germany, and Italy)

Acorn Industrial Services Limited (Germany)

Aeroengine Bearings (United Kingdom)

Aktif Endustrie (France, Germany, and Italy)

Alphateam SPRL (France, Germany, and Italy)

Australian Bearing Pty Ltd. (France, Germany, and Italy)

Baltic Bearing Supply (France, Germany, and Italy)

Bearing Dynamics (France, Germany, and Italy)

Bearing Sales Corp. (France, Germany, and Italy)

Bearing and Tool GmbH (France, Germany, and Italy)

Budapesti Sved Csapagy Ltd. (France, Germany, and Italy)

Cantoni and C.S.N.C (France, Germany, and Italy)

CCVI Bearing Co. (France, Germany, and Italy)

DCD Corporation (France, Germany, and Italy)

Delta Export (France, Germany, and Italy)

EuroLatin Services (France, Germany, and Italy)

Fair Friend Ent. Co. Ltd. (France, Germany, and Italy)

Friedrich Picard GmbH (France, Germany, and Italy)

Frohlich and Dorken GmbH (France, Germany, and Italy)

Han Sol Technology Corporation (France, Germany, and Italy)

Hayley Import and Export (France, Germany, and Italy)

Heinz Knust (France, Germany, and Italy)

Hergenhan GmbH (France, Germany, and Italy)

Hoens Industrieel BV (France, Germany, and Italy)

IBD Ltd. (France, Germany, and Italy)

International Bearing Pte. Ltd. (France, Germany, and Italy)

Italcuscinetti Group (France, Germany, and Italy)

Kian Ho Bearings (France, Germany, and Italy)

KIS Antriebs Technik GmbH (France, Germany, and Italy)

KSM Minamiguchi/Bearing Manufacturing Co. (France, Germany, and Italy)

LTM Industrietechnik (France, Germany, and Italy)

M. Buchhalter Maschenmode/Hergenhan (France, Germany, and Italy)

Micaknowledge (France, Germany, and Italy)

Minetti SPA (France, Germany, and Italy)

Ming Hing Trading Co. (France, Germany, and Italy)

Motion Bearing Pte. Ltd. (France, Germany, and Italy)

Rodamietos Rovi (France, Germany, and Italy)

Roeirasa (France, Germany, and Italy)

Rovi-Marcay (France, Germany, and Italy)

Rovi-Valencia (France, Germany, and Italy)

Taninaka Ltd. (France, Germany, and Italy)

Top G Trading Company (France, Germany, and Italy)

Withus Technology Corporation (France, Germany, and Italy)

Wyko Export (France, Germany, and Italy)

These companies did not submit adequate responses to our antidumping duty questionnaire.

1

Consequently, we found that they withheld “information that has been requested by the administering authority” under section 776(a)(2) of the Act.

1

See memoranda from analysts to the file, “Administrative Review of the Antidumping Duty Order on Antifriction Bearings and Parts Thereof from Germany—Responses to Questionnaire (December 11, 2003), Administrative Review of the Antidumping Duty Order on Antifriction Bearings and Parts Thereof from Italy—Responses to Questionnaire (December 11, 2003), and Administrative Review of the Antidumping Duty Order on Antifriction Bearings and Parts Thereof from France—Responses to Questionnaire (December 11, 2003).”

In addition to the above firms, Weber Kugellager International (Weber) did not provide information that was essential for the Department to calculate antidumping margins for the firm (see Section 3 of the concurrent Issues and Decision Memorandum to this notice). Although Weber received a neutral facts available rate in the

Preliminary Results for France, et al.

(69 FR 5952), the company's failure to provide this information resulted in our use of adverse facts available in these final results of reviews. We also rejected a submission made by Weber on August 3, 2004, as being untimely within the deadlines established by our regulations. See 19 CFR 351.302(d).

In accordance with section 776(b) of the Act, we made an adverse inference in our application of the facts available. This is appropriate because the

companies identified above did not provide appropriate responses to our requests for information and, even following the issuance of our preliminary results, did not provide any acceptable rationale for their non-responses. Therefore, we found and continue to find that they have not acted to the best of their ability in providing us with relevant information which is under their control. As adverse facts available for these firms, we have applied the highest rate which we have calculated for any company in any segment of the relevant proceeding on ball bearings from the countries for which these firms have been reviewed. We have selected these rates because they are sufficiently high as to reasonably assure that these firms do not obtain a more favorable result by failing to cooperate. Specifically, the rates are as follows: 66.42 percent for France, 70.41 percent for Germany, 68.29 percent for Italy, and 61.14 percent for the United Kingdom.

Section 776(c) of the Act provides that the Department shall, to the extent practicable, corroborate secondary information used for facts available by reviewing independent sources reasonably at its disposal. Information from a prior segment of the proceeding or from another company in the same proceeding constitutes secondary information. The Statement of Administrative Action accompanying the Uruguay Round Agreements Act, H.R. Doc. 103-316, at 870 (1994) (SAA), provides that the word “corroborate” means that the Department will satisfy itself that the secondary information to be used has probative value. As explained in

Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, from Japan, and Tapered Roller Bearings Four Inches or Less in Outside Diameter, and Components Thereof, from Japan: Preliminary Results of Antidumping Duty Administrative Reviews and Partial Termination of Administrative Reviews

, 61 FR 57391, 57392 (November 6, 1996)

(Tapered Roller Bearings and Parts Thereof from Japan)

, in order to corroborate secondary information, the Department will examine, to the extent practicable, the reliability and relevance of the information used. Unlike other types of information, however, such as input costs or selling expenses, there are no independent sources for calculated dumping margins. The only source for margins is administrative determinations. Thus, with respect to an administrative review, if the Department chooses as facts available a calculated dumping margin from a prior segment of the proceeding, it is not necessary to question the reliability of the margin for that time period.

With respect to the relevance aspect of corroboration, however, the Department will consider information reasonably at its disposal as to whether there are circumstances that would render a margin not relevant. Where circumstances indicate that the selected margin is not appropriate as adverse facts available, the Department will disregard the margin and determine an appropriate margin. See

Fresh Cut Flowers from Mexico; Final Results of Antidumping Duty Administrative Review

, 61 FR 6812, 6814 (February 22, 1996), where the Department disregarded the highest dumping margin as best information available because the margin was based on another company's uncharacteristic business expense resulting in an unusually high margin. Further, in accordance with

F.LII De Cecco Di Filippo Fara S. Martino S.p.A.

v.

United States

, 216 F.3d 1027 (CAFC June 16, 2000), we also examine whether information on the record would support the selected rates as reasonable facts available.

We find that the rates which we are using for these final results have probative value. We compared the selected margins to margins calculated on individual sales of the merchandise in question made by the French, German, Italian, and U.K. companies covered by the instant review. We found that a number of sales in commercial quantities had dumping margins near or exceeding the rates under consideration. The details of this analysis are contained in the memoranda from the case analysts to Mark Ross or Laurie Parkhill.

2

This evidence supports an inference that the selected rates reflect the actual dumping margins for the firms in question.

2

See the memorandum entitled

The Use of Adverse Facts Available and Corroboration of Secondary Information for Italy

(September 8, 2004),

The Use of Facts Available and Corroboration of Secondary Information for France

(February 2, 2004), and

The Use of Adverse Facts Available and Corroboration of Secondary Information for Germany

(September 8, 2004). Also, see the memorandum on the United Kingdom review record entitled

The Use of Facts Available and Corroboration of Secondary Information for Aeroengine Bearings

(September 8, 2004), and the memoranda on the review records for France, Germany, and the United Kingdom entitled

The Use of Adverse Facts Available and Corroboration of Secondary Information for Weber Kugellager International

(September 8, 2004) (collectively, Corroboration Memoranda).

These rates are the current cash-deposit rates for a number of firms (

e.g.

, in the Germany proceeding, 70.41 percent is the current deposit rate for, among other firms, Timken (formerly Torrington Nadellager), NTN, Bearings Discount International GmbH, Motion Bearings, and Alphateam SPRL). Furthermore, there is no information on the record that demonstrates that the rates we have selected are inappropriate for use as the total adverse facts-available rates for the companies in question. Therefore, we consider the selected rates to have probative value with respect to the firms in question in these reviews and to reflect the appropriate adverse inferences.

Other Changes Since the Preliminary Results

Based on our analysis of comments received, we have made revisions that have changed the results for certain firms. We have corrected programming and clerical errors in the preliminary results, where applicable. Any alleged programming or clerical errors about which we or the parties do not agree are discussed in section 10 of the Decision Memo.

Rescission of the Review in Part

In the

Preliminary Results for France, et al.

, we stated our intent to rescind the administrative reviews of bearings that were exported by Comal SNC (France, Germany, Italy), Interspecies Donath GmbH (France, Germany, Italy), and BTM Bearing Trade F.C. Miltner (BTM) (France, Germany, Italy and the United Kingdom). Comal SNC and Interspecies Donath GmbH were unlocatable and BTM was not the proper party to review because it was a reseller and all of its suppliers had knowledge at the time of sale that the merchandise was destined for the United States. See 69 FR at 5951. Since the status of these firms remains unchanged and we have received no additional information or argument as to our treatment of these companies, we hereby rescind the reviews with respect to these companies in these final results.

In the preliminary results of the reviews, we also indicated that, for certain companies that reported no shipments of merchandise subject to those reviews, we intended to rescind these reviews at the time of our final results if we continued to find no evidence of sales during the period of review (69 FR 5959 at footnote 1). However, as we indicated in

Antifriction Bearings (Other than Tapered Roller Bearings) and Parts Thereof from France, Germany, Italy, Japan, Sweden, and the United Kingdom; Final Results of Antidumping Duty Administrative Reviews and Revocation of Orders in Part

, 66 FR 36551, 36554 (July 12, 2001), and in

Ball Bearings and Parts Thereof from France, Germany, Italy, Japan, and the United

Kingdom; Final Results of Antidumping Duty Administrative Reviews

, 67 FR 55780, 55781 (August 30, 2002), since it is impossible to establish with certainty from U.S. Customs and Border Protection (CBP) data the accuracy of their statements, we will instruct CBP at the time of liquidation to review all documentation for suspended entries of subject merchandise. If CBP finds that any of the “no-shipment” respondents, in fact, had shipments of subject merchandise during the POR, we will instruct CBP to apply a facts-available rate to such respondents based on the adverse facts-available rate we have determined for the applicable country of origin and subject merchandise and we are not rescinding the reviews for the respondents in question.

Revocation of Order in Part

In the

Preliminary Results for France, et al.

, we stated our intent to revoke the order on ball bearings from Germany in part with respect to Paul Mueller. See 69 FR at 5953-54. We find that, for Paul Mueller, the regulatory requirement for revocation has been satisfied. See 19 CFR 351.222(d)(1). We have received no information or argumentation since the

Preliminary Results for France, et al.

which would cause us to change this determination. Accordingly, we revoke the order in part with respect to all subject merchandise manufactured and exported by Paul Mueller in these final results of review. See the Analysis Memorandum for the Preliminary Results of Review for Paul Mueller, dated February 2, 2004.

Final Results of the Reviews

We determine that the following percentage weighted-average margins on ball bearings exist for the period of May 1, 2002, through April 30, 2003:

Company

Margin

FRANCE—Ball Bearings

Ace Bearing and Transmission Service

66.42

Aktif Endustrie Malzemeleri

66.42

Alphateam SPRL

66.42

Australian Bearing Pty Ltd

66.42

Baltic Bearing Supply

66.42

Bearing and Tool GmbH

66.42

Bearing Dynamics

66.42

Bearing Sales Corp

66.42

Budapesti Sved Csapagy Ltd

66.42

Cantoni and C.S.N.C

66.42

CCVI Bearing Co

66.42

DCD Corp

66.42

Delta Export GmbH

66.42

EuroLatin Ex. Services

66.42

Fair Friend Ent. Co. Ltd

66.42

Friedrich Picard GmbH

66.42

Frohlich and Dorken GmbH

66.42

Han Sol Tech. Corp/Yoo Shin Co

66.42

Hayley Import/Export

66.42

Heinz Knust

66.42

Hergenhan GmbH

66.42

Hoens Industrieel BV

66.42

IBD Ltd

66.42

International Bearing Pte. Ltd

66.42

Italcuscinetti Group

66.42

Kian Ho Bearings, Ltd

66.42

KIS Antriebs Technik GmbH

66.42

KSM, Minamiguchi/Bearing Manufacturing Co

66.42

LTM Industrietechnik

66.42

M. Buchhalter Maschenmode/Hergenhan

66.42

Micaknowledge

66.42

Minetti SpA

66.42

Ming Hing Trading Co

66.42

Motion Bearing Pte. Ltd

66.42

Ringball Corporation

2.94

Rodamietos Rovi

66.42

Roeirasa

66.42

Rovi-Marcay

66.42

Rovi-Valencia

66.42

SKF France S.A. and Sarma

5.25

SNR Roulements

6.40

Taninaka Ltd

66.42

Top G Trading Pte Ltd

66.42

Weber Kugellager Int

66.42

Withus Technology Corporation

66.42

Wyko Export

66.42

FRANCE—Spherical Plain Bearings

SKF France S.A. and Sarma

22.72

GERMANY—Ball Bearings

Ace Bearing and Transmission Service

70.41

Acorn Industrial Services Limited

70.41

Aktif Endustrie Malzemeleri

70.41

Alphateam SPRL

70.41

Australian Bearing Pty Ltd

70.41

Baltic Bearing Supply

70.41

Bearing and Tool GmbH

70.41

Bearing Dynamics

70.41

Bearing Sales Corp

70.41

Budapesti Sved Csapagy Ltd

70.41

Cantoni and C.S.N.C

70.41

CCVI Bearing Co

70.41

DCD Corp

70.41

Delta Export GmbH

70.41

EuroLatin Ex. Services

70.41

Fair Friend Ent. Co. Ltd

70.41

Friedrich Picard GmbH

70.41

Frohlich and Dorken GmbH

70.41

Han Sol Tech. Corp/Yoo Shin Co

70.41

Hayley Import/Export

70.41

Heinz Knust

70.41

Hergenhan GmbH

70.41

Hoens Industrieel BV

70.41

IBD Ltd

70.41

INA/FAG

5.59

International Bearing Pte. Ltd

70.41

Italcuscinetti Group

70.41

Kian Ho Bearings, Ltd

70.41

KIS Antriebs Technik GmbH

70.41

KSM, Minamiguchi/Bearing Manufacturing Co

70.41

LTM Industrietechnik

70.41

M. Buchhalter Maschenmode/Hergenhan

70.41

Micaknowledge

70.41

Minetti SpA

70.41

Ming Hing Trading Co

70.41

Motion Bearing Pte Ltd.

70.41

Paul Mueller

0.36

Ringball

6.54

Rodamietos Rovi

70.41

Roeirasa

70.41

Rovi-Marcay

70.41

Rovi-Valencia

70.41

SKF GmbH

2.49

Taninaka Ltd

70.41

Top G Trading Pte Ltd

70.41

Weber Kugellager Int

70.41

Withus Technology Corporation

70.41

Wyko Export

70.41

ITALY—Ball Bearings

Ace Bearing and Transmission Service

68.29

Aktif Endustrie Malzemeleri

68.29

Alphateam SPRL

68.29

Australian Bearing Pty Ltd

68.29

Baltic Bearing Supply

68.29

Bearing and Tool GmbH

68.29

Bearing Dynamics

68.29

Bearing Sales Corp

68.29

Budapesti Sved Csapagy Ltd

68.29

Cantoni and C.S.N.C

68.29

CCVI Bearing Co

68.29

DCD Corp

68.29

Delta Export GmbH

68.29

EuroLatin Ex. Services

68.29

FAG Italia S.p.A

4.79

Fair Friend Ent. Co. Ltd

68.29

Friedrich Picard GmbH

68.29

Frohlich and Dorken GmbH

68.29

Han Sol Tech. Corp/Yoo Shin Co

68.29

Hayley Import/Export

68.29

Heinz Knust

68.29

Hergenhan GmbH

68.29

Hoens Industrieel BV

68.29

IBD Ltd

68.29

International Bearing Pte. Ltd

68.29

Italcuscinetti Group

68.29

Kian Ho Bearings, Ltd

68.29

KIS Antriebs Technik GmbH

68.29

KSM, Minamiguchi/Bearing Manufacturing Co

68.29

LTM Industrietechnik

68.29

M. Buchhalter Maschenmode/Hergenhan

68.29

Micaknowledge

68.29

Minetti SpA

68.29

Ming Hing Trading Co

68.29

Motion Bearing Pte. Ltd

68.29

Ringball

3.45

Rodamietos Rovi

68.29

Roeirasa

68.29

Rovi-Marcay

68.29

Rovi-Valencia

68.29

SKF Industrie S.p.A

1.38

Taninaka Ltd

68.29

Top G Trading Pte Ltd

68.29

Weber Kugellager Int

68.29

Withus Technology Corporation

68.29

Wyko Export

68.29

JAPAN—Ball Bearings

Asahi Seiko Co. Ltd

0.23

Koyo Seiko Co., Ltd

5.56

Nankai Seiko

0.46

Nippon Pillow Block Sales

3.37

NSK Ltd

2.46

NTN Corp

2.74

Osaka Pump

1.78

Sapporo Precision

8.74

Takeshita Seiko

2.90

SINGAPORE—Ball Bearings

NMB/Pelmec

1.94

UNITED KINGDOM—Ball Bearings

Aeroengine Bearings

61.14

Barden/FAG

4.10

Assessment Rates

The Department will determine and CBP shall assess, antidumping duties on all appropriate entries. We will issue appropriate assessment instructions directly to CBP within 15 days of publication of these final results of reviews. In accordance with 19 CFR 351.212(b)(1), we have calculated, whenever possible, an exporter/importer-specific assessment rate or value for subject merchandise.

With respect to the companies which did not respond to our questionnaire for these reviews, the Department will instruct CBP to liquidate all imports of subject merchandise for which the non-responsive companies acted in any aspect of the transaction at the applicable adverse-facts-available rate for each country unless the manufacturer of the subject merchandise listed that non-responsive company as an EP customer.

The Department clarified its “automatic assessment” regulation on May 6, 2003 (68 FR 23954). This clarification will apply to entries of subject merchandise during the period of review produced by companies included in these final results of reviews for which the reviewed companies did not know their merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification,

see Notice of Policy Concerning Assessment of Antidumping Duties

, 68 FR 23954 (May 6, 2003).

a. Export Price

With respect to export-price (EP) sales, we divided the total dumping margins (calculated as the difference between normal value and the EP) for each exporter's importer/customer by the total number of units the exporter sold to that importer/customer. We will direct CBP to assess the resulting per-unit dollar amount against each unit of merchandise on each of that importer's/customer's entries under the relevant order during the review period.

b. Constructed Export Price

For constructed export-price (CEP) sales (sampled and non-sampled), we divided the total dumping margins for the reviewed sales by the total entered value of those reviewed sales for each importer. We will direct CBP to assess the resulting percentage margin against the entered customs values for the subject merchandise on each of that importer's entries under the relevant order during the review period. See 19 CFR 351.212(b)(1).

Cash-Deposit Requirements

To calculate the cash-deposit rate for each respondent (

i.e.

, each exporter and/or manufacturer included in these reviews), we divided the total dumping margins for each company by the total net value of that company's sales of merchandise during the review period subject to each order.

To derive a single deposit rate for each respondent, we weight-averaged the EP and CEP deposit rates (using the EP and CEP, respectively, as the weighting factors). To accomplish this when we sampled CEP sales, we first calculated the total dumping margins for all CEP sales during the review period by multiplying the sample CEP margins by the ratio of total days in the review period to days in the sample weeks. We then calculated a total net value for all CEP sales during the review period by multiplying the sample CEP total net value by the same ratio. Finally, we divided the combined total dumping margins for both EP and CEP sales by the combined total value for both EP and CEP sales to obtain the deposit rate.

We will direct CBP to collect the resulting percentage deposit rate against the entered customs value of each of the exporter's entries of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice. Entries of parts incorporated into finished bearings before sales to an unaffiliated customer in the United States will receive the respondent's deposit rate applicable to the order.

Furthermore, the following deposit requirements will be effective upon publication of this notice of final results of administrative reviews for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(1) of the Act: (1) The cash-deposit rates for the reviewed companies will be the rates shown above except that, for firms whose weighted-average margins are less than 0.5 percent and, therefore,

de minimis

, the Department will not require a deposit of estimated antidumping duties; (2) for previously reviewed or investigated companies not listed above, the cash-deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original less-than-fair-value (LTFV) investigation but the manufacturer is, the cash-deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; (4) the cash-deposit rate for all other manufacturers or exporters will continue to be the “All Others” rate for the relevant order made effective by the final results of review published on July 26, 1993.

See Antifriction Bearings (Other Than Tapered Roller Bearings) and Parts Thereof From France, et al: Final Results of Antidumping Duty Administrative Reviews and Revocation in Part of an Antidumping Duty Order

, 58 FR 39729 (July 26, 1993). For ball bearings from Italy,

see Antifriction Bearings (Other Than Tapered Roller Bearings) and Parts Thereof From France, et al; Final Results of Antidumping Duty Administrative Reviews, Partial Termination of Administrative Reviews, and Revocation in Part of Antidumping Duty Orders

, 61 FR 66472, 66521 (December 17, 1996). These rates are the “All Others” rates from the relevant LTFV investigation.

These deposit requirements shall remain in effect until publication of the final results of the next administrative reviews.

This notice serves as a reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during these review periods. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties.

This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO are sanctionable violations. We are issuing and publishing these determinations in accordance with sections 751(a)(1) and 777(i) of the Act.

Dated: September 8, 2004.

James J. Jochum,

Assistant Secretary for Import Administration.

Appendix

Comments and Responses

1. Offsetting Margins with Above-Normal-Value Transactions

2. Model-Match Methodology

3. Adverse Facts Available

4. Indirect Selling Expenses

5. Allocation Methodology

6. Movement Expenses

7. Sample Sales

8. Billing Adjustments and Rebates

9. Cost Issues

10. Clerical Errors

11. Miscellaneous Issues

A. Performance Lubricant

B. HM Sales Reporting by NPBS

C. Sales Outside the Ordinary Course of Trade

D. Home-Market Interest Rate

E. Home-Market Commissions

[FR Doc. E4-2195 Filed 9-14-04; 8:45 am]

BILLING CODE 3510-DS-P