MET Laboratories, Inc., Expansion of Recognition

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. NRTL-1-88]

MET Laboratories, Inc., Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice announces the Agency's final decision on

application of MET Laboratories, Inc. (MET), for expansion of its

recognition as a Nationally Recognized Testing Laboratory (NRTL) under

29 CFR 1910.7.

EFFECTIVE DATE: This recognition becomes effective on March 9, 1999

and, unless modified in accordance with 29 CFR 1910.7, continues in

effect while MET remains recognized by OSHA as an NRTL.

FOR FURTHER INFORMATION CONTACT: Bernard Pasquet, Office of Technical

Programs and Coordination Activities, NRTL Program, Occupational Safety

and Health Administration, U.S. Department of Labor, 200 Constitution

Avenue, NW., Room N3653, Washington, DC 20210, or phone (202) 693-2110.

SUPPLEMENTARY INFORMATION:

Notice of Final Decision

The Occupational Safety and Health Administration (OSHA) hereby

gives notice of the expansion of recognition of MET Laboratories, Inc.

(MET), as a Nationally Recognized Testing Laboratory (NRTL) to include

the use of the additional test standards listed below. OSHA recognizes

an organization as an NRTL and processes applications related to such

recognitions following requirements in Section 1910.7 of Title 29, Code

of Federal Regulations (29 CFR 1910.7). Appendix A to this section

requires that OSHA

[[Page 11503]]

publish this public notice of its final decision on an application.

MET submitted a request, dated June 3, 1998 (see Exhibit 20A), to

expand its recognition to use additional test standards. MET provided

some additional information related to this request on August 21, 1998

(see Exhibit 20B). MET will notify OSHA, as stated in this letter,

regarding a change in its existing capability to perform explosion

tests. Relatedly, OSHA is imposing limitations on the testing permitted

under certain test standards.

OSHA published the required notice in the Federal Register (63 FR

63085, 11/10/98) to announce the application. The notice included a

preliminary finding that MET could meet the requirements in 29 CFR

1910.7 for expansion of its recognition, and invited public comment on

the applications by January 11, 1999. OSHA received no comments

concerning this application. MET's previous application as an NRTL

covered the renewal and an expansion of its recognition (61 FR 41661,

8/6/96), which OSHA granted on November 20, 1996 (61 FR 225).

You may obtain or review copies of all public documents pertaining

to the application by contacting the Docket Office, Occupational Safety

and Health Administration, U.S. Department of Labor, 200 Constitution

Avenue, NW., Room N2625, Washington, DC 20210. You should refer to

Docket No. NRTL-1-88, the permanent record of public information on the

MET recognition.

The current address of the testing facility (site) that OSHA

recognizes for MET is: MET Laboratories, Inc., 914 West Patapsco

Avenue, Baltimore, Maryland 21230.

Final Decision and Order

The NRTL Program staff has examined the application, additional

information submitted, other pertinent information, and the

recommendation by the audit staff, in a memo dated September 9, 1998

(see Exhibit 21), to expand MET's recognition to include the additional

test standards. Based upon this examination, OSHA finds that MET has

met the requirements of 29 CFR 1910.7 for expansion of its recognition

to use an additional 17 test standards, subject to the limitations and

conditions listed below. Pursuant to the authority in 29 CFR 1910.7,

OSHA hereby expands the recognition of MET, subject to these

limitations and conditions. As is the case for any NRTL, MET's

recognition is further limited to equipment or materials (products) for

which OSHA standards require third party testing and certification

before use in the workplace.

Limitations

OSHA hereby expands the recognition of MET for testing and

certification of products to demonstrate compliance to the following 17

standards. OSHA has determined that each standard meets the

requirements for an appropriate test standard prescribed in 29 CFR

1910.7(c).

ANSI/UL 5 Surface Metal Raceways and Fittings

ANSI/UL 50 Enclosures for Electrical Equipment

ANSI/UL 65 Electric Wired Cabinets

ANSI/UL 201 Garage Equipment

ANSI/UL 482 Portable Sun/Heat Lamps

ANSI/UL 514A Metallic Outlet Boxes, Electrical

UL 664 Commercial Dry-Cleaning Machines (Type IV)

ANSI/UL 698 Industrial Control Equipment for Use in Hazardous

(Classified) Locations

UL 775 Graphic Arts Equipment

ANSI/UL 886 Outlet Boxes and Fittings for Use in Hazardous

(Classified) Locations \1\

ANSI/UL 1017 Vacuum Cleaning Machines and Blower Cleaners

ANSI/UL 1018 Electric Aquarium Equipment

ANSI/UL 1054 Special-Use Switches

ANSI/UL 1203 Explosion-Proof and Dust-Ignition-Proof Electrical

Equipment for Use in Hazardous (Classified) Locations \1\

---------------------------------------------------------------------------

\1\ Testing and certification of products under this test

standard is limited to Class I locations. Explosion testing is also

limited to current test chamber capabilities.

---------------------------------------------------------------------------

ANSI/UL 1310 Direct Plug-In Transformer Units

ANSI/UL 1573 Stage and Studio Lighting Units

UL 6500 Audio/Visual and Musical Instrument Apparatus for Household,

Commercial, and Similar General Use

Conditions

MET must also abide by the following conditions of the recognition,

in addition to those already required by 29 CFR 1910.7:

OSHA must be allowed access to MET's facility and records for

purposes of ascertaining continuing compliance with the terms of its

recognition and to investigate as OSHA deems necessary;

If MET has reason to doubt the efficacy of any test standard it is

using under this program, it must promptly inform the test standard

developing organization of this fact and provide that organization with

appropriate relevant information upon which its concerns are based;

MET must not engage in or permit others to engage in any

misrepresentation of the scope or conditions of its recognition. As

part of this condition, MET agrees that it will allow no representation

that it is either a recognized or an accredited Nationally Recognized

Testing Laboratory (NRTL) without clearly indicating the specific

equipment or material to which this recognition is tied, or that its

recognition is limited to certain products;

MET must inform OSHA as soon as possible, in writing, of any change

of ownership or key personnel, and of any major changes in its

operations as an NRTL, including details;

MET will meet all the terms of its recognition and will always

comply with all OSHA policies pertaining to this recognition;

MET will continue to meet the requirements for recognition in all

areas where it has been recognized; and

MET will always cooperate with OSHA to assure compliance with the

spirit as well as the letter of its recognition and 29 CFR 1910.7.

Signed at Washington, DC, this 24th day of February, 1999.

Charles N. Jeffress,

Assistant Secretary.

[FR Doc. 99-5791 Filed 3-8-99; 8:45 am]

BILLING CODE 4510-26-P