Laforza Automobiles, Inc.; Grant of Application for Temporary Exemption From Federal Motor Vehicle Safety Standard No. 208

Federal RegisterSep 14, 1998

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-98-3782; Notice 2]

Laforza Automobiles, Inc.; Grant of Application for Temporary

Exemption From Federal Motor Vehicle Safety Standard No. 208

This notice grants the application by Laforza Automobiles, Inc., of

Escondido, California, (``Laforza'') for a temporary exemption from the

automatic restraint requirements of Federal Motor Vehicle Safety

Standard No. 208 Occupant Crash Protection, as described below. The

basis of the application was that compliance would cause substantial

economic hardship to a manufacturer that has tried in good faith to

comply with the standard.

Notice of receipt of the application was published on May 20, 1998,

and an opportunity afforded for comment (63 FR 27784).

Laforza is a Nevada corporation established in August 1997. To date

it has produced no motor vehicles. It intends to purchase chassis from

Magnum Industriales s.r.l., an Italian company, ``where it will undergo

the necessary modifications for the US market.'' A Ford engine,

transmission, and associated emission control systems will be

installed, and the end result will be a multipurpose passenger vehicle

(sport utility) called the Prima 4X4. Laforza estimated that it will

produce a total of 400 units between the date of the exemption and

December 31, 2000. This is the date that its requested temporary

exemption would expire.

Laforza seeks an exemption from S4.2.6.1.1 and S4.2.6.2 of Standard

No. 208. Paragraph S4.2.6.1.1, in pertinent part, requires Laforza to

provide a driver side air bag on not less than 80 percent of all Primas

manufactured before September 1, 1998. Paragraph S4.2.6.2 requires all

Primas manufactured on and after September 1, 1998, to be equipped with

both driver and right front passenger airbags. Although the passenger

side air bag is not required until September 1 of this year, ``the

airbag development program has to include both the passenger and driver

side airbags since the development duration for a driver's side airbag

would overlap the time when a passenger's side airbag will be

required.'' Laforza continued, ``If the development is not combined,

many of these tests would have to be repeated with a significant

increase in test and material costs.''

In the first 6 months after its agreement with Magnum, Laforza

spent

[[Page 49153]]

``an estimated total of 200 manhours and $15,000'' on air bag

compliance issues. Lacking the resources to independently develop an

air bag system, it ``has contacted airbag development companies in the

US to assist with the project.'' Laforza concluded that it will take 2

years to develop and certify the system. If immediate compliance were

required, the cost would be $4,000,000. An exemption would permit

Laforza to generate revenues ``to meet the costs mandated by the airbag

development program'' and spread these costs over a period of time.

Because the company is less than a year old, it could not submit

corporate balance sheets and income statements for the three years

immediately preceding the filing of its application, as specified by

NHTSA's regulation. Its stockholder equity is $900,000.

Laforza argued that ``production of the Laforza Prima 4X4 is in the

best interest of the public and the U.S. economy,'' pointing to the

uniqueness of the vehicle, and the American components that it

incorporates, the powertrain from Ford Motor Company and the purchase

of ``other parts * * * from approximately five different U.S.

companies.'' The company currently employs 15 people full-time and

three people part time, which will grow as production increases.

Further, ``in addition, * * * at least 50 employees from other

companies are involved in the Laforza project.'' During the exemption

period, the Prima will be ``equipped with a conventional retractor

type, three-point driver and passenger seatbelt system that meets all

requirements of FMVSS No. 208.'' The vehicle otherwise complies with

all Federal motor vehicle safety standards that apply to it.

No comments were received on the application.

Laforza began its efforts to comply with the automatic restraint

requirements upon its agreement with Magnum Industriales to purchase

chassis from it (the term seems to encompass a body without the engine,

transmission, and emission control systems). Since taking this step

towards becoming a vehicle manufacturer, Laforza spent the time between

then and the filing of its application in beginning its efforts to

comply with the standard. It believes that it can comply by the end of

2000. On the other hand, a crash program to comply would cost it

$4,000,000. The company has not generated any income to establish a

retained earnings account. Any significant up-front expenses to comply

with Standard No. 208 would likely place it in a negative net worth

position. Negative operating cash flows combined with the required debt

load and resulting interest charges would probably be unsustainable,

and the company would never become a going concern. The enterprise to

produce the Laforza involves purchases from several different American

companies. The company has requested exemption from only one Federal

motor vehicle safety standard for a vehicle which will be equipped with

a ``conventional retractor type three-point driver and passenger

seatbelt system that meets all requirements of FMVSS No. 208.'' It

estimates that only 400 vehicles will be produced while the exemption

is in effect.

These facts and arguments are similar to those offered in other

instances in which NHTSA has granted temporary exemptions based upon a

manufacturer's hardship. In consideration of the foregoing, it is

hereby found that compliance with the automatic restraint requirements

would cause substantial economic hardship to a manufacturer that has

tried in good faith to comply with the standard. It is further found

that a temporary exemption from these requirements would be in the

public interest and consistent with the objectives of motor vehicle

safety. Accordingly, Laforza Automobiles, Inc., is hereby granted NHTSA

Temporary Exemption No. 98-6 from paragraphs S4.2.6.1.1 and S4.2.6.2 of

49 CFR 571.208 Standard No. 208, Occupant Crash Protection, expiring

January 1, 2001.

(49 U.S.C. 30113; delegation of authority at 49 CFR 1.50)

Issued on: September 2, 1998.

Ricardo Martinez,

Administrator.

[FR Doc. 98-24593 Filed 9-11-98; 8:45 am]

BILLING CODE 4910-59-P

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.