Shelby American, Inc.; Application for Temporary Exemption From Federal Motor Vehicle Safety Standard No. 208

Federal RegisterAug 18, 1998

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-98-4320; Notice 1]

Shelby American, Inc.; Application for Temporary Exemption From

Federal Motor Vehicle Safety Standard No. 208

Shelby American, Inc., of Las Vegas, Nevada (``Shelby''), has

applied for an exemption until July 1, 2000, from the automatic

restraint provisions of Federal Motor Vehicle Safety Standard No. 208

Occupant Crash Protection (S4.1.5.3). The basis of the application is

that compliance would cause substantial economic hardship to a

manufacturer that has tried in good faith to comply with the standard.

This notice of receipt of the petition is published in accordance

with agency regulations on the subject and does not represent any

judgment by the agency about the merits of the petition.

Shelby is a Texas corporation, privately held and wholly owned by

Carroll Shelby. Its current business activities are conducted by three

wholly owned subsidiaries. The first of these subsidiaries is Shelby

Series One, Inc., the unit that will produce a new sports car which is

the subject of this application for a temporary exemption. These

vehicles currently exist in prototype form only, and none have been

produced. The second subsidiary is Shelby CSX4000, Inc., which produces

``a component vehicle sold without engine or transmission,'' to

individuals who will install the power train of their choice. Shelby

sold 75 of these Cobra replica assemblies in the past year. The third

subsidiary is Shelby Original 427S/Cs, Inc., whose business is to

assemble automobiles ``from certain new old stock parts surviving from

the original 1965 Shelby Cobra production run . . . supplemented by

newly manufactured parts utilizing original tooling.'' Two such

vehicles have been assembled and sold to date.

The Series I is a two-passenger open convertible sports car,

powered by the Oldsmobile Aurora engine. The first prototypes were

shown in early 1997. Shelby has asked to be excused from compliance

with the automatic restraint requirements of Standard No. 208. Shelby

is working ``with many outside companies'' to complete the vehicle

development and certification. Development of the Series I started in

March 1995 (i.e., engineering tasks subsequent to initial design

development). To date, Shelby has spent an estimated total of 400 man

hours and $75,000 related to air bag development. As with development

of the engine and interior, Shelby must contract the air bag

development to an outside company. This cost will total $4,643,500 over

the period of time for which it has asked for an exemption. Additional

expenditures of $546,000 will be necessary to cover the costs of

testing, and integration of airbag wiring. In the interim, the Series I

will be equipped with a three-point driver and passenger restraint

system. It is optimistic that it can sell 500 Series I cars in the

period for which it has requested exemption. With these sales ``Shelby

American will be able to support the estimated $216,229 monthly

development expenditure necessary for implementation of the airbag at

the end of the two year period.''

Shelby had no material operations in 1995. Its unaudited

consolidated balance sheet shows a net loss of $738,415 for 1996, and a

net income of $147,904 for 1997.

The applicant argues that ``the production of the Shelby Series I

is in the best interest of the public and the US economy.'' The company

is opening a new 100,000 square foot facility in June 1998 in Las Vegas

to produce the Series I. The new facility ``will provide direct

employment to approximately 200 employees.'' In addition, ``there are

approximately 25 development/partner companies working with Shelby

American on the development of the Shelby Series I, providing indirect

employment for those companies' personnel . . .'' The car will be sold

through select Oldsmobile dealers . . . providing employment to many

sales and service personnel at the dealership level.'' Most major

components are produced in the United States, including the engine

(Oldsmobile), tires (Goodyear), and transmission (ZF, from RBT, a US

company). The Series I is technically advanced, combining ``an aluminum

chassis with a carbon-fiber body, a new concept amongst production

vehicles, which provides strength and durability while minimizing

weight.'' Shelby believes that ``the reduced weight achieved with this

vehicle will translate into a new standard for improved emissions and

fuel efficiency. Aside from Standard No. 208, the car will be certified

as conforming to all applicable Federal motor vehicle safety standards.

Interested persons are invited to submit comments on the

application described above. Comments should refer to the docket and

notice number, and be submitted to: Docket Management, National Highway

Traffic Safety Administration, room PL-401, 400 Seventh Street, SW,

Washington, DC 20590. It is requested that two copies be submitted.

All comments received before the close of business on the comment

closing date below will be considered, and will be available for

examination in the docket at the above address both before and after

that date, between the hours of 10 a.m. and 5 p.m. To the extent

possible, comments filed after the closing date will also be

considered. Notice of final action on the petition will be published in

the Federal Register pursuant to the authority indicated below.

Comment closing date: September 17, 1998.

Authority: 49 U.S.C. 30113; delegations of authority at 49 CFR

1.50 and 501.4.

Issued on: August 13, 1998.

L. Robert Shelton,

Associate Administrator for Safety Performance Standards.

[FR Doc. 98-22209 Filed 8-17-98; 8:45 am]

BILLING CODE 4910-59-P

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.

Shelby American, Inc.; Application for Temporary Exemption From Federal Motor Vehicle Safety Standard No. 208 · 63 FR 44302 | Frix