Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From Japan, and Tapered Roller Bearings, Four Inches or Less in Outside Diameter, and Components Thereof, From Japan; Preliminary Results of Antidumping Duty Administrative Reviews

Federal RegisterJul 10, 1998

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF COMMERCE

International Trade Administration

[A-588-054, A-588-604]

Tapered Roller Bearings and Parts Thereof, Finished and

Unfinished, From Japan, and Tapered Roller Bearings, Four Inches or

Less in Outside Diameter, and Components Thereof, From Japan;

Preliminary Results of Antidumping Duty Administrative Reviews

AGENCY: Import Administration, International Trade Administration,

Department of Commerce.

ACTION: Notice of Preliminary Results of Antidumping Duty

Administrative Reviews and Recission in Part.

-----------------------------------------------------------------------

SUMMARY: In response to requests from respondents, the Department of

Commerce (the Department) is conducting administrative reviews of the

antidumping duty order on tapered roller bearings (TRBs) and parts

thereof, finished and unfinished, from Japan (A-588-604), and of the

antidumping finding on TRBs, four inches or less in outside diameter,

and components thereof, from Japan (A-588-054). The review of the A-

588-054 finding covers two manufacturers/exporters and one reseller/

exporter of subject merchandise to the United States during the period

October 1, 1996 through September 30, 1997. The review of the A-588-604

order covers two manufacturers/exporters and one reseller/exporter, and

the period October 1, 1996 through September 30, 1997.

We preliminarily determine that sales of TRBs have been made below

the normal value (NV). If these preliminary results are adopted in our

final results of administrative reviews, we will instruct the U.S.

Customs Service to assess antidumping duties based on the difference

between United States price (USP) and the normal value. Interested

parties are invited to comment on these preliminary results. Parties

which submit argument in these proceedings are requested to submit with

the argument (1) a statement of the issues and (2) a brief summary of

the argument.

EFFECTIVE DATE: July 10, 1998.

FOR FURTHER INFORMATION CONTACT: Charles Ranado or Stephanie Arthur,

[[Page 37345]]

AD/CVD Enforcement, Group III, Import Administration, International

Trade Administration, U.S. Department of Commerce, 14th Street and

Constitution Avenue, N.W., Washington, D.C. 20230, telephone: (202)

482-3518 or, 482-6312, respectively.

SUPPLEMENTARY INFORMATION:

Applicable Statute and Regulations

Unless otherwise indicated, all citations to the Tariff Act of

1930, as amended (the Act), are references to the provisions effective

January 1, 1995, the effective date of the amendments made to the Act

by the Uruguay Round Agreements Act. In addition, unless otherwise

indicated, all citations are to the Department's regulations, 19 CFR

part 351 (62 FR 27296 (May 19, 1997)).

Background

On August 18, 1976, the Treasury Department published in the

Federal Register (41 FR 34974) the antidumping finding on TRBs from

Japan, and on October 6, 1987, the Department published the antidumping

duty order on TRBs from Japan (52 FR 37352). On October 2, 1997, the

Department published the notice of ``Opportunity to Request

Administrative Review'' for both TRBs cases covering the period October

1, 1996 through September 30, 1997 (62 FR 51628).

In accordance with 19 CFR 351.213(b), on October 28, 1997, NTN

Corporation (NTN) requested that we conduct a review of its sales in

the A-588-604 case. In addition, on October 31, 1997, Koyo Seiko Co.,

Ltd. (Koyo) requested that we conduct a review of its sales in the A-

588-054 case, and Fuji Heavy Industries, Ltd. (Fuji) and NSK Ltd. (NSK)

requested that we conduct a review of their sales in both the A-588-054

and A-588-604 TRB cases. On November 15, 1997, we published in the

Federal Register a notice of initiation of these antidumping duty

administrative reviews covering the period October 1, 1996 through

September 30, 1997 (62 FR 58513).

Scope of the Reviews

Imports covered by the A-588-054 finding are sales or entries of

TRBs, four inches or less in outside diameter when assembled, including

inner race or cone assemblies and outer races or cups, sold either as a

unit or separately. This merchandise is classified under Harmonized

Tariff Schedule (HTS) item numbers 8482.20.00 and 8482.99.30.

Imports covered by the A-588-604 order include TRBs and parts

thereof, finished and unfinished, which are flange, take-up cartridge,

and hanger units incorporating TRBs, and roller housings (except pillow

blocks) incorporating tapered rollers, with or without spindles,

whether or not for automotive use. Products subject to the A-588-054

finding are not included within the scope of the A-588-604 order,

except those manufactured by NTN. This merchandise is currently

classifiable under HTS item numbers 8482.99.30, 8483.20.40, 8482.20.20,

8483.20.80, 8482.91.00, 8483.30.80, 8483.90.20, 8483.90.30, and

8483.90.60. The HTS item numbers listed above for both the A-588-054

finding and the A-588-604 order are provided for convenience and

Customs purposes. The written descriptions remain dispositive.

The period for each review is October 1, 1996 through September 30,

1997. The review of the A-588-054 finding covers TRB sales by two

manufacturers/exporters (Koyo and NSK) and one reseller/exporter

(Fuji). The review of the A-588-604 order covers TRB sales by two

manufacturers/exporters (NTN and NSK) and one reseller/exporter (Fuji).

As explained in the ``Recission in Part'' section of this notice, we

are terminating our reviews in both the A-588-054 and A-588-604 cases

for two of the four firms.

Recission in Part

In accordance with section 351.213(d)(1) of the Department's

regulations, on January 9, 1998, NSK withdrew its request for review in

both the A-588-054 and A-588-604 cases. In addition, on January 23,

1998, Fuji withdrew its request for review in both the A-588-054 and A-

588-604 cases. Because we received timely requests for the withdrawal

of review from both NSK and Fuji, and because no other party to the

proceedings requested a review for NSK and Fuji in either the A-588-054

or A-588-604 cases, in accordance with 19 CFR 351.213(d)(1), we are

rescinding both the A-588-054 and A-588-604 reviews for NSK and Fuji.

Use of Facts Available

We preliminary determine, in accordance with section 776(a) of the

Act, that the use of facts available is appropriate in one type of

situation. We used partial facts available in instances where we were

unable to use some portion of a response in calculating the dumping

margin. For partial facts available, we extrapolated information from

the company's response and used that information in our calculations.

Koyo's response indicates that for certain sales to original equipment

manufacturers (OEM sales) there were no pre-sale freight expenses.

However, from the information reported, we were unable to identify

those OEM sales for which Koyo incurred no pre-sale freight expenses;

therefore, we have applied non-adverse facts available and recalculated

the expense adjustment. For further information, please see the

preliminary analysis memorandum on file for Koyo.

Export Price and Constructed Export Price

Because all of Koyo's sales and certain of NTN's sales of subject

merchandise were first sold to unaffiliated purchasers after

importation into the United States, in calculating U.S. price we used

constructed export price (CEP) as defined in section 772(b) of the Act,

for all of Koyo's sales and certain of NTN's sales. We based CEP on the

packed, delivered price to unaffiliated purchasers in the United

States. We made deductions, where appropriate, for discounts, billing

adjustments, freight allowances, and rebates. Pursuant to section

772(c)(2)(A) of the Act, we reduced this price for movement expenses

(Japanese pre-sale inland freight, Japanese post-sale inland freight,

international air and/or ocean freight, marine insurance, Japanese

brokerage and handling, U.S. inland freight from the port to the

warehouse, U.S. inland freight from the warehouse to the customer, U.S.

duty, and U.S. brokerage and handling). We also reduced the price,

where applicable, by an amount for the following expenses incurred in

the selling of the merchandise in the United States pursuant to section

772(d)(1) of the Act: commissions to unaffiliated parties, U.S. credit,

payments to third parties, U.S. repacking expenses, and indirect

selling expenses (which included, where applicable, inventory carrying

costs, indirect advertising expenses, and indirect technical services

expenses). Finally, pursuant to section 772(d)(3) of the Act, we

further reduced U.S. price by an amount for profit to arrive at CEP.

NTN claimed an offsetting adjustment to U.S. indirect selling

expenses to account for the cost of financing cash deposits during the

POR. In past reviews we have accepted such an adjustment, mainly to

account for the opportunity cost associated with making cash deposits

(i.e., the cost of having money unavailable for a period of time).

However, we have changed our practice of accepting such an adjustment.

See Antifriction Bearings (Other Than Tapered Roller Bearings) and

Parts Thereof from France, et. al.; Final Results of Antidumping

Administrative Review, 63 FR 33347 (June 18, 1998).

[[Page 37346]]

Because certain of NTN's sales of subject merchandise were made to

unaffiliated purchasers in the United States prior to importation into

the United States and the CEP methodology was not indicated by the

facts of record, in accordance with section 772(a) of the Act we used

export price (EP) for these sales. We calculated EP as the packed,

delivered price to unaffiliated purchasers in the United States. In

accordance with section 772(c)(2)(A) of the Act, we reduced this price,

where applicable, by Japanese pre-sale inland freight, Japanese post-

sale inland freight, international air and/or ocean freight, marine

insurance, Japanese brokerage and handling, U.S. brokerage and

handling, U.S. duty, and U.S. inland freight.

Where appropriate, in accordance with section 772(d)(2) of the Act,

the Department also deducts from CEP the cost of any further

manufacture or assembly in the United States, except where the special

rule provided in section 772(e) of the Act is applicable. Section

772(e) of the Act provides that, where the subject merchandise is

imported by an affiliated person and the value added in the United

States by the affiliated person is likely to exceed substantially the

value of the subject merchandise, we shall determine the CEP for such

merchandise using the price of identical or other subject merchandise

if there is a sufficient quantity of sales to provide a reasonable

basis for comparison and we determine that the use of such sales is

appropriate. If there is not a sufficient quantity of such sales or if

we determine that using the price of identical or other subject

merchandise is not appropriate, we may use any other reasonable basis

to determine CEP. See Sections 772(e)(1) and (2) of the Act.

In judging whether the use of identical or other subject

merchandise is appropriate, the Department must consider several

factors, including whether it is more appropriate to use another

``reasonable basis.'' Under some circumstances, we may use the standard

methodology as a reasonable alternative to the methods described in

paragraphs 772(e)(1) and (2) of the Act. In deciding whether it is more

appropriate to use the standard methodology, we have considered and

weighed the burden on the Department in applying the standard

methodology as a reasonable alternative and the extent to which

application of the standard methodology will lead to more accurate

results. The burden of using the standard methodology may vary from

case to case depending on factors such as the nature of the further-

manufacturing process and the finished products. The increased accuracy

gained by applying the standard methodology will vary significantly

from case to case, depending upon such factors as the amount of value

added in the United States and the proportion of total U.S. sales that

involve further manufacturing. In cases where the burden is high, it is

more likely that the Department will determine that potential gains in

accuracy do not outweigh the burden of applying the standard

methodology. Thus, the Department will likely determine that

application of the standard methodology is not more appropriate than

application of the methods described in paragraphs 772(e)(1) and (2),

or some other reasonable alternative methodology. By contrast, if the

burden is relatively low and there is reason to believe the standard

methodology is likely to be more accurate, the Department is more

likely to determine that it is not appropriate to apply the methods

described in paragraphs 772(e)(1) or (2) of the Act in lieu of the

standard methodology. See Tapered Roller Bearings and Parts Thereof,

Finished and Unfinished, from Japan, and Tapered Roller Bearings, Four

Inches or Less in Outside Diameter, and Components Thereof, From Japan;

Preliminary Results of Antidumping Duty Administrative Reviews, 62 FR

47452 at 47455 (September 9, 1997).

NTN imported subject merchandise (TRBs parts) which was further

processed in the United States. NTN further manufactured the imported

scope merchandise into merchandise of the same class or kind as

merchandise within the scope of the A-588-604 order. Based on

information provided by NTN, we first determined whether the value

added in the United States was likely to exceed substantially the value

of the subject merchandise. We estimated the value added based on the

differences between the averages of the prices charged to the first

unaffiliated U.S. customer for the final merchandise sold (finished

TRBs) and the averages of the prices paid for the subject merchandise

(imported TRBs parts) by the affiliated party, and determined that the

value added was likely to exceed substantially the value of the

imported TRB parts.

We then examined whether it would be appropriate to use sales of

non-further-manufactured merchandise as a basis for comparison, as

stated under paragraphs 772(e)(1) and (2) of the Act. Based on the

information provided by NTN, we determined that the proportion of its

further-manufactured merchandise to its total imports of subject

merchandise was relatively low. In NTN's case, any potential gains in

accuracy gained from examining NTN's further-manufactured sales are

outweighed by the burden of the applying the standard methodology and

that it would be appropriate to apply one of the methodologies

specified in the statute with respect to NTN's imported TRB parts.

Furthermore, other sales are in sufficient quantity for the purpose of

determining dumping margins for NTN's imported TRBs which were further

manufactured in the United States prior to resale. Therefore, we have

used the weighted-average dumping margins we calculated on NTN's sales

of non-further-manufactured TRBs.

No other adjustments were claimed or allowed.

Normal Value

A. Viability

Based on 1) the fact that each company's quantity of sales in the

home market was greater than five percent of its sales to the U.S.

market and 2) the absence of any information that a particular market

situation in the exporting country does not permit a proper comparison,

we determined that the quantity of the foreign like product for all

respondents sold in the exporting country was sufficient to permit a

proper comparison with the sales of subject merchandise to the United

States, pursuant to section 773(a) of the Act. Therefore, in accordance

with section 773(a)(1)(B)(i) of the Act, we based NV on the prices at

which the foreign like products were first sold for consumption in the

exporting country.

B. Arm's-Length Sales

For NTN and Koyo we have excluded from our analysis those sales

made to affiliated customers in the home market which were not at arm's

length. See Section 773(a)(1)(B) of the Act. We determined the arm's-

length nature of home market sales to affiliated parties by means of

our 99.5 percent arm's-length test in which we calculated, for each

model, the percentage difference between the weighted-average prices to

the affiliated customer and to all unaffiliated customers and then

calculated, for each affiliated customer, the overall weighted-average

percentage difference in prices for all models purchased by the

customer. If the overall weighted-average price ratio for the

affiliated customer was equal to or greater than 99.5 percent, we

determined that all sales to this affiliated customer were at arm's

length. Conversely, if the ratio for a customer was less than 99.5

percent, we

[[Page 37347]]

determined that all sales to the affiliated customer were not at arm's

length because, on average, the affiliated customer paid less than

unaffiliated customers for the same merchandise, and therefore we

excluded all sales to the affiliated customer from our analysis. Where

we were unable to calculate an affiliated-customer ratio because

identical merchandise was not sold to both affiliated and unaffiliated

customers, we were unable to determine if these sales were at arm's

length, and, therefore, we excluded them from our analysis (see, e.g.,

Certain Stainless Steel Wire Rod from France: Preliminary Results of

Antidumping Duty Administrative Review, 61 FR 8915 (March 6, 1996);

Certain Stainless Steel Wire Rods from France: Final Results of

Antidumping Duty Administrative Review, 63 FR 30185 (June 3, 1998)).

C. Cost-of-Production Analysis

Because we disregarded sales below the cost of production (COP) in

our last completed A-588-054 review for Koyo, and in our last completed

A-588-604 review for NTN, we have reasonable grounds to believe or

suspect that sales of the foreign like product under consideration for

the determination of NV in these reviews may have been made at prices

below the COP, as provided by section 773(b)(2)(A)(ii) of the Act (see

Final Results of Antidumping Duty Administrative Reviews; Tapered

Roller Bearings and Parts Thereof, Finished and Unfinished, From Japan

and Tapered Roller Bearings, Four Inches or Less in Outside Diameter,

and Components Thereof, from Japan, 63 FR 2558 (January 15, 1998)).

Therefore, pursuant to section 773(b)(1) of the Act, we initiated a COP

investigation of sales by Koyo in the A-588-054 case and NTN in the A-

588-604 case.

In accordance with section 773(b)(3) of the Act, we calculated COP

based on the sum of the costs of materials and fabrication employed in

producing the foreign like product, plus selling, general, and

administrative expenses (SG&A) and the cost of all expenses incidental

to placing the foreign like product in condition packed ready for

shipment. We relied on the home market sales and COP information

provided by Koyo and NTN except in those instances where the data were

not appropriately quantified or valued (see the company-specific COP/CV

preliminary results memoranda, on file in Import Administration's

Central Records Unit, Room B-099 of the main Commerce building).

After calculating COP, we tested whether home market sales of TRBs

were made at prices below COP within an extended period of time in

substantial quantities and whether such prices permitted the recovery

of all costs within a reasonable period of time. We compared model-

specific COPs to the reported home market prices less any applicable

movement charges, discounts, and rebates.

Pursuant to section 773(b)(2)(C) of the Act, where less than 20

percent of a respondent's home market sales for a model are at prices

less than the COP, we do not disregard any below-cost sales of that

model because we determine that the below-cost sales were not made in

``substantial quantities.'' Where 20 percent or more of a respondent's

home market sales of a given model are at prices less than COP, we

disregard the below-cost sales because 1) they are made within an

extended period of time in substantial quantities, in accordance with

sections 773(b)(2)(B) and (C) of the Act, and 2) based on comparisons

of prices to weighted-average COPs for the POR, they were at prices

which would not permit the recovery of all costs within a reasonable

period of time, in accordance with section 773(b)(2)(D) of the Act.

The results of our cost tests for Koyo and NTN indicated that for

certain home market models, less than 20 percent of the sales of the

model were at prices below COP. We therefore retained all sales of the

model in our analysis and used them as the basis for determining NV.

Our cost test for these respondents also indicated that, within an

extended period of time (normally one year, in accordance with section

773(b)(2)(B) of the Act), for certain home market models more than 20

percent of the home market sales were sold at prices below COP and were

not sold at prices which would permit recovery of all costs within a

reasonable period of time. In accordance with section 773(b)(1) of the

Act, we therefore excluded these below-cost sales from our analysis and

used the remaining above-cost sales as the basis for determining NV.

D. Product Comparisons

We compared U.S. sales with contemporaneous sales of the foreign

like product in the home market. We considered bearings identical on

the basis of nomenclature and determined most similar TRBs using our

sum-of-the-deviations model-match methodology which compares TRBs

according to the following five physical criteria: inside diameter,

outside diameter, width, load rating, and Y2 factor. We used a 20

percent difference-in-merchandise (difmer) cost deviation cap as the

maximum difference in cost allowable for similar merchandise, which we

calculated as the absolute value of the difference between the U.S. and

home market variable costs of manufacturing divided by the U.S. total

cost of manufacturing.

E. Level of Trade (LOT)

In accordance with section 773(a)(1)(B) of the Act, to the extent

practicable, we determine NV based on sales in the comparison market at

the same LOT as the EP or CEP transaction. The NV LOT is that of the

starting-price sales in the comparison market or, when NV is based on

constructed value (CV), that of the sales from which we derive selling,

SG&A expenses and profit. For EP, the U.S. LOT is also the level of the

starting-price sale, which is usually from exporter to importer. For

CEP, it is the level of the constructed sale from the exporter to the

importer.

To determine whether NV sales are at a different LOT than EP or

CEP, we examine stages in the marketing process and selling functions

along the chain of distribution between the producer and unaffiliated

customer. If the comparison-market sales are at at a different LOT, and

the difference affects price comparability, as manifested in a pattern

of consistent price differences between the sales on which NV is based

and comparison-market sales at the LOT of the export transaction, we

make an LOT adjustment under 773(a)(7)(A) of the Act. Finally, for CEP

sales, if the NV level is more remote from the factory than the CEP

level and there is no basis for determining whether the difference in

the levels between NV and CEP affects price comparability, we adjust NV

under section 773(a)(7)(B) of the act (the CEP offset provision). See

Notice of Final Determination of Sales at Less than Fair Value; Certain

Cut-to-Length Carbon Steel Plate from South Africa, 62 FR 61731

(November 19, 1997).

We determined that for Koyo there were two home market LOTs and one

U.S. LOT (i.e., the CEP LOT). Because there was no home market LOT

equivalent to the U.S. LOT, and because NV for Koyo was more remote

from the factory than the CEP, we made a CEP offset adjustment to NV.

For NTN we found that there were three home market LOTs and two (EP

and CEP) LOTs in the United States. Because there were no home market

LOTs equivalent to NTN's CEP LOT, and because NV for NTN was more

remote from the factory than the CEP, we made a CEP offset adjustment

to NV. We also determined that NTN's EP LOT was equivalent to one of

its LOTs in the

[[Page 37348]]

home market. Because we determined that there was a pattern of

consistent price differences, we made a LOT adjustment to NV for NTN

when we compared sales at different LOTs. For a company-specific

description of our LOT analysis, see the preliminary analysis

memoranda.

F. Home Market Price

We based home market prices on the packed, ex-factory or delivered

prices to affiliated purchasers (where an arm's-length relationship was

demonstrated) and unaffiliated purchasers in the home market. We made

adjustments for differences in packing and for movement expenses in

accordance with sections 773(a)(6)(A) and (B) of the Act. In addition,

we made adjustments for differences in cost attributable to differences

in physical characteristics of the merchandise pursuant to section

773(a)(6)(C)(ii) of the Act, and for differences in circumstances of

sale (COS) in accordance with section 773(a)(6)(C)(iii) of the Act and

19 CFR 351.410. For comparison to EP we made COS adjustments by

deducting home market direct selling expenses and adding U.S. direct

selling expenses. For comparisons to CEP, we made COS adjustments to NV

by deducting home market direct selling expenses. We also made

adjustments, where applicable, for home market indirect selling

expenses to offset U.S. commissions in EP and CEP calculations. No

other adjustments were claimed or allowed.

On January 8, 1998, the Court of Appeals for the Federal Circuit

(the Court) issued a decision in Cemex v. United States, 133 F.3d 897

(Fed. Cir. 1998). In that case, based on the pre-URAA version of the

Act, the Court discussed the appropriateness of using CV as the basis

for foreign market value when the Department finds home market sales to

be outside the ordinary course of trade. This issue was not raised by

any party in these 1996-97 reviews. However, the URAA amended the

definition of sales outside the ``ordinary course of trade'' to include

sales below cost. See section 771(15) of the Act. Consequently, the

Department has reconsidered its practice in accordance with this court

decision and has determined that it would be inappropriate to resort

directly to CV, in lieu of foreign market sales, as the basis for NV if

the Department finds foreign market sales of merchandise identical or

most similar to that sold in the United States to be outside the

ordinary course of trade. Instead, the Department will use sales of

similar merchandise, if such sales exist. The Department will use CV as

the basis for NV only when there are no above-cost sales that are

otherwise suitable for comparison. Therefore, in this proceeding, when

making comparisons in accordance with section 771(16) of the Act, we

considered all products sold in the home market as described in the

Scope of the Investigation section of this notice, above, that were in

the ordinary course of trade for purposes of determining appropriate

product comparisons to U.S. sales. Where there were no sales of

identical merchandise in the home market made in the ordinary course of

trade to compare to U.S. sales, we compared U.S. sales to sales of the

most similar foreign like product made in the ordinary course of trade,

based on the characteristics listed in Sections B and C to our

antidumping questionnaire. We have implemented the Court's decision in

this case, to the extent that the data on the record permitted. See,

e.g., Brass Sheet and Strip from Canada: Final Results of Antidumping

Duty Administrative Review and Notice of Intent Not to Revoke Order in

Part, 63 FR 33037, 33038 (June 17, 1998).

We calculated CV based on the cost of materials and fabrication

employed in producing the subject merchandise, SG&A, and profit. In

accordance with 772(e)(2)(A) of the Act, we based SG&A expenses and

profit on the amounts incurred and realized by the respondent in

connection with the production and sale of the foreign like product in

the ordinary course of trade for consumption in the foreign country.

For selling expenses, we used the weighted-average home market selling

expenses. To the extent possible, we calculated CV by LOT, using the

selling expenses and profit determined for each LOT in the comparison

market. Where appropriate, we made adjustments to CV in accordance with

section 773(a)(8) of the Act and 19 CFR 351.410 for COS adjustments and

LOT differences. For comparisons to EP, we made COS adjustments by

deducting home market direct selling expenses and adding U.S. direct

selling expenses. For comparisons to CEP, we made COS adjustments by

deducting home market direct selling expenses. We also made

adjustments, where applicable, for home market indirect selling

expenses to offset commissions in EP and CEP comparisons.

Preliminary Results of Review

As a result of our reviews, we preliminarily determine the

following weighted-average dumping margins exist for the period October

1, 1996 through September 30, 1997:

------------------------------------------------------------------------

Margin

Manufacturer/Exporter (percent)

------------------------------------------------------------------------

For the A-588-054 Case:

Koyo Seiko............................................. 7.62

For the A-588-604 Case:

NTN.................................................... 18.83

------------------------------------------------------------------------

Parties to these proceedings may request disclosure within five

days of the date of publication of this notice and may request a

hearing within thirty days of publication. Any hearing, if requested,

will be held 37 days after the date of publication, or the first

business day thereafter. Case briefs and/or written comments from

interested parties may be submitted no later than 30 days after the

date of publication. Rebuttal briefs and rebuttals to written comments,

limited to issues raised in the case briefs and comments, may be filed

no later than 35 days after the date of publication of this notice.

Parties who submit argument in these proceedings are requested to

submit with the argument (1) a statement of the issues and (2) a brief

summary of the argument. The Department will issue final results of

these administrative reviews, including the results of our analysis of

the issues in any such written comments or at a hearing, within 120

days of issuance of these preliminary results.

The Department shall determine, and the U.S. Customs Service shall

assess, antidumping duties on all appropriate entries. In accordance

with 19 CFR 351.212(b)(1), we will calculate importer-specific ad

valorem assessment rates for the merchandise based on the ratio of the

total amount of antidumping duties calculated for the examined sales

made during the POR to the total customs value of the sales used to

calculate those duties. This rate will be assessed uniformly on all

entries of that particular importer made during the POR. The Department

will issue appropriate appraisement instructions directly to the

Customs Service upon completion of the review.

Furthermore, the following deposit requirements will be effective

upon completion of the final results of these administrative reviews

for all shipments of TRBs from Japan entered, or withdrawn from

warehouse, for consumption on or after the publication date of the

final results of these administrative reviews, as provided by section

751(a)(1) of the Act:

(1) The cash deposit rates for the reviewed companies will be those

rates established in the final results of these reviews;

(2) For previously reviewed or investigated companies not listed

above,

[[Page 37349]]

the cash deposit rate will continue to be the company-specific rate

published for the most recent period;

(3) If the exporter is not a firm covered in these reviews, a prior

review, or the less-than-fair-value investigations, but the

manufacturer is, the cash deposit rate will be the rate established for

the most recent period for the manufacturer of the merchandise; and

(4) If neither the exporter nor the manufacturer is a firm covered

in these or any previous reviews conducted by the Department, the cash

deposit rate for the A-588-054 case will be 18.07 percent, and 36.52

percent for the A-588-604 case (see Final Results of Antidumping Duty

Administrative Reviews; Tapered Roller Bearings, Finished and

Unfinished, and Parts Thereof, from Japan and Tapered Roller Bearings,

Four Inches or less in Outside Diameter, and Components Thereof, From

Japan, 58 FR 64720 (December 9, 1993)).

This notice serves as a preliminary reminder to importers of their

responsibility to file a certificate regarding the reimbursement of

antidumping duties prior to liquidation of the relevant entries during

this review period. Failure to comply with this requirement could

result in the Secretary's presumption that reimbursement of antidumping

duties occurred and the subsequent assessment of double antidumping

duties.

This determination is issued and published in accordance with

sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.213.

Dated: July 2, 1998.

Joseph A. Spetrini,

Acting Assistant Secretary for Import Administration.

[FR Doc. 98-18309 Filed 7-9-98; 8:45 am]

BILLING CODE 3510-DS-P

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.