Detroit Testing Laboratory, Inc., Recognition as an NRTL

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. NRTL-2-97]

Detroit Testing Laboratory, Inc., Recognition as an NRTL

AGENCY: Occupational Safety and Health Administration; Labor.

ACTION: Notice of recognition as a Nationally Recognized Testing

Laboratory (NRTL).

-----------------------------------------------------------------------

SUMMARY: This notice announces the Agency's final decision on the

application of Detroit Testing Laboratory, Inc. for recognition as an

NRTL under 29 CFR 1910.7.

EFFECTIVE DATE: This recognition will become effective on April 27,

1998 and will be valid for a period of five years from that date, until

April 28, 2003, unless terminated prior to that date, in accordance

with 29 CFR 1910.7.

FOR FURTHER INFORMATION CONTACT: Bernard Pasquet, Office of Technical

Programs and Coordination Activities, NRTL Program, Occupational Safety

and Health Administration, U.S. Department of Labor, 200 Constitution

Avenue, N.W., Room N3653, Washington, D.C. 20210, or phone (202) 219-

7056.

SUPPLEMENTARY INFORMATION:

Notice of Final Decision

Notice is hereby given that the Occupational Safety and Health

Administration (OSHA) has recognized Detroit Testing Laboratory, Inc.

(DTL) as a Nationally Recognized Testing Laboratory for the equipment

or materials listed below. DTL applied for recognition as a Nationally

Recognized Testing Laboratory, pursuant to 29 CFR 1910.7, and a notice

of the application was published in the Federal Register (62 FR 62358,

11/21/97). The notice included a preliminary finding that DTL could

meet the requirements for recognition detailed in 29 CFR 1910.7, and

invited public comment on the application by January 20, 1998. No

comments were received concerning this request for recognition.

Copies of all application documents (Docket No. NRTL-2-97) are

available for inspection and duplication at the Docket Office,

Occupational Safety and Health Administration, U.S. Department of

Labor, 200 Constitution Avenue, N.W., Room N2634, Washington, D.C.

20210.

The address of the laboratory covered by this application is:

Detroit Testing Laboratory, Inc., 7111 E. Eleven Mile, Warren, Michigan

48092.

Background

Detroit Testing Laboratory, Inc. (DTL), according to the applicant,

is a Michigan corporation and was formally incorporated in 1949. The

applicant states that the lab was originally founded in 1903 as a

partnership, that ownership of the lab changed in 1948 and again in

1968, and that in 1976, the current owner purchased DTL as sole

stockholder.

The applicant submitted an application package, and separately

submitted a Quality Assurance (QA) Manual (see Exhibits 2A and 2B). The

QA Manual includes: An organization chart, position descriptions, and

resumes of key personnel; department descriptions including equipment

and standards used for departments involved in testing; description of

certifications done and standards used for certification; and the

details on how calibrations are handled, including descriptions of

equipment and standards.

The four primary criteria for recognition are presented below,

along with examples which illustrate how DTL has met these criteria.

Capability

Section 1910.7(b)(1) states that for each specified item of

equipment or material to be listed, labeled or accepted, the laboratory

must have the capability (including proper testing equipment and

facilities, trained staff, written testing procedures, and calibration

and quality control programs) to perform appropriate testing. The

application and on-site review report indicate that DTL meets these

criteria.

The applicant has one main facility at its site in Warren,

Michigan, and a smaller test facility in Center Line, Michigan. This

smaller site is not included in the applicant's request for

recognition. The applicant has natural gas, electric, compressed air,

steam, and water available in the laboratory for product testing and

for calibrations and tests.

The applicant's QA Manual shows the testing experience of its key

testing staff, mentions its certification, and listing and labeling

experience with products, and describes its testing capabilities and

experience in a number of specific areas. It also contains a list of

major instrumentation and equipment.

Quality Assurance (QA) Procedures, Test/Operating procedures

(developed on a form, the original of which is kept by each lab),

calibration procedures, and audits (including proficiency audits which

depends in part on the use of outside private services) are described

in the QA Manual. Furthermore, the QA includes an Internal Corrective

Action Procedure whereby reports are issued to an area when it operates

outside the guidelines of the QA System. The QA Manual also contains a

sample handling procedure and procedures on employee training. Written

procedures exist for typical tests, per QA Manual.

[[Page 20662]]

Control Procedures

Section 1910.7(b)(2) requires that the NRTL provide certain

controls and services, to the extent necessary, for the particular

equipment or material to be listed, labeled, or accepted. These consist

of implementation of control procedures for identifying the listed or

labeled equipment or materials, inspecting the production runs at

factories to assure conformance with test standards, and conducting

field inspections to monitor and assure the proper use of identifying

marks or labels. The application and on-site review report indicate

that DTL meets these criteria.

The application contains the description of the listing and

labeling procedure, and indicates ``inspections'' will be done four

times per year and periodic compliance testing is done every four

years. A sample listing and follow-up agreement was also provided. In

addition, ``Instructions for * * * Inspections * * *,'' and a sample

inspection form were submitted.

Independence

Section 1910.7(b)(3) requires that the NRTL be completely

independent of employers subject to the tested equipment requirements,

and for any manufacturers or vendors of equipment or materials being

tested for these purposes. The application and on-site review report

indicate that DTL meets these criteria.

A statement of independence was supplied attesting that DTL is

independent of any producer, supplier, or vendor. The applicant claims

in the statement that, for products being tested and certified: It has

no managerial affiliations with any producer, supplier, or vendor; it

has no securities, investments, or stock options in the product lines;

the employment security of its personnel is free from influence by any

producer, supplier, or vendor; that it is not owned, operated, or

controlled by any producers, suppliers, or vendors; and that it is not

engaged in promotion or design.

Creditable Reports/Complaint Handling

Section 1910.7(b)(4) provides that the NRTL must maintain effective

procedures for producing creditable findings and reports that are

objective and without bias, as well as for handling complaints and

disputes under a fair and reasonable system. The application and on-

site review report indicate that DTL meets these criteria.

The QA Manual contains details on development of test data and

reports, and both the application and the QA Manual describe a

complaint procedure.

Standards

After publication of the notice of the application and preliminary

finding, DTL informed OSHA that one of the standards it had requested

for recognition, ANSI/UL 1025 Electric Air Heaters, had been withdrawn

by Underwriters Laboratories Inc. (UL), the organization that developed

this test standard. DTL subsequently requested recognition for the two

standards which replaced ANSI/UL 1025, in a letter dated January 6,

1998.

Inasmuch as the original standard was withdrawn by UL prior to the

publication of the application, the notice was in error and OSHA is

granting the request to correct the error. Also, OSHA believes that the

two new standards are substantially equivalent to the standard

withdrawn, and that DTL has the necessary capability to test and

certify to those standards.

Final Decision and Order

Based upon a preponderance of the evidence resulting from an

examination of the complete application, the supporting documentation,

and the OSHA staff finding including On-Site Review Report, dated June

25, 1997 (see Exhibit 3), OSHA finds that Detroit Testing Laboratory,

Inc. has met the requirements of 29 CFR 1910.7 to be recognized by OSHA

as a Nationally Recognized Testing Laboratory to test and certify

certain equipment or materials. Pursuant to the authority in 29 CFR

1910.7, Detroit Testing Laboratory, Inc. is hereby recognized as a

Nationally Recognized Testing Laboratory, subject to the limitations

and conditions listed below.

Limitations

This recognition is limited to equipment or materials which, under

Title 29, require or permit testing, listing, labeling, approval,

acceptance, or certification, by a Nationally Recognized Testing

Laboratory. This recognition is further limited to the use of the

following test standards for the testing and certification of equipment

or materials included within the scope of these standards.

DTL asserts by its application that the following standards pertain

to equipment or materials that will be used in environments under

OSHA's jurisdiction, and OSHA has determined they are appropriate

within the meaning of 29 CFR 1910.7(c):

ANSI/UL 234 Low Voltage Lighting Fixtures for Use in Recreational

Vehicles

ANSI/UL 1278 Standard for Safety for Movable and Wall- or Ceiling-Hung

Electric Room Heaters

UL 2021 Fixed and Location-Dedicated Electric Room Heaters

Conditions

Detroit Testing Laboratory, Inc. must also abide by the following

conditions of the recognition, in addition to those already required by

29 CFR 1910.7:

OSHA shall be allowed access to DTL's facility and records for

purposes of ascertaining continuing compliance with the terms of its

recognition and to investigate as OSHA deems necessary;

If DTL has reason to doubt the efficacy of any test standard it is

using under this program, it shall promptly inform the test standard

developing organization of this fact and provide that organization with

appropriate relevant information upon which its concerns are based;

DTL shall not engage in or permit others to engage in any

misrepresentation of the scope or conditions of its recognition. As

part of this condition, DTL agrees that it will allow no representation

that it is either a recognized or an accredited Nationally Recognized

Testing Laboratory (NRTL) without clearly indicating the specific

equipment or material to which this recognition is tied, or that its

recognition is limited to certain products;

DTL shall inform OSHA as soon as possible, in writing, of any

change of ownership or key personnel, including details;

DTL will continue to meet the requirements for recognition in all

areas where it has been recognized; and

DTL will always cooperate with OSHA to assure compliance with the

spirit as well as the letter of its recognition and 29 CFR 1910.7.

Signed at Washington, D.C. this 22nd day of April, 1998.

Charles N. Jeffress,

Assistant Secretary.

[FR Doc. 98-11107 Filed 4-24-98; 8:45 am]

BILLING CODE 4510-26-P