Procedure for Changing a Method of Accounting Under Section 263A

Federal RegisterAug 5, 1997

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF THE TREASURY

Internal Revenue Service

26 CFR Part 1

[TD 8728]

RIN 1545-AQ94

Procedure for Changing a Method of Accounting Under Section 263A

AGENCY: Internal Revenue Service (IRS), Treasury.

ACTION: Final and temporary regulations.

-----------------------------------------------------------------------

SUMMARY: This document contains final regulations relating to the

requirements for changing a method of accounting for costs subject to

section 263A. The regulations provide guidance regarding changes in

method of accounting for costs incurred in producing property and

acquiring property for resale. The regulations affect taxpayers

changing their method of accounting for costs subject to section 263A.

DATES: These regulations are effective August 5, 1997.

FOR FURTHER INFORMATION CONTACT: Cheryl Lynn Oseekey, (202) 622-4970

(not a toll-free number).

SUPPLEMENTARY INFORMATION:

Background

On March 30, 1987 and August 7, 1987, temporary regulations under

section 263A were published in the Federal Register (TD 8131, 52 FR

10052 and TD 8148, 52 FR 29375), and cross-referenced to notices of

proposed rulemaking published in the Federal Register on the same date

(52 FR 10118 and 52 FR 29391). The temporary regulations contain rules

for taxpayers changing their method of accounting to comply with the

capitalization rules of section 263A. A public hearing on these

temporary and proposed regulations was held on December 7, 1987.

On August 9, 1993, final regulations under section 263A were

published in the Federal Register (TD 8482, 58 FR 42198). These final

regulations did not address the accounting method provisions in the

1987 temporary regulations, which continued in effect. On August 5,

1994, final and temporary regulations were published in the Federal

Register (TD 8559, 59 FR 39958). These final regulations address ``pick

and pack costs'' and other expenses. The August 5, 1994 temporary

regulations renumbered the accounting method provisions in the 1987

temporary regulations from Sec. 1.263A-1T(e) to Sec. 1.263A-7T.

This document adopts, with modifications, Sec. 1.263A-7T as final

regulations.

Explanation of Provisions

In 1987, the IRS and the Treasury Department issued temporary

regulations that provide guidance to taxpayers changing their method of

accounting to comply with the capitalization rules of section 263A. The

regulations provide automatic consent for taxpayers required to change

their method of accounting for the first taxable year section 263A was

effective.

Subsequent to promulgation of the 1987 temporary regulations, the

IRS and the Treasury Department issued various revenue procedures that

set forth rules and procedures applicable to certain changes in method

of accounting for costs subject to section 263A for which taxpayers can

obtain automatic consent. These revenue procedures provide automatic

consent to change the method of accounting in years other than the

first taxable year section 263A was effective. Where automatic consent

is not available by revenue procedure, taxpayers can obtain the

Commissioner's consent to change a method of accounting for costs

subject to section 263A under Rev. Proc. 97-27 (1997-21 I.R.B. 10).

Rev. Proc. 97-27 and the automatic change revenue procedures

describe how a change in method of accounting may be effected, but they

do not describe how inventory and other property on hand at the

beginning of the year of change should be revalued. These final

regulations provide guidance regarding how taxpayers must revalue

property in connection with a change in method of accounting for costs

subject to section 263A. The revaluation rules for inventory are

substantially similar to the revaluation rules contained in the 1987

temporary

[[Page 42052]]

regulations. Section 1.263A-7(c) provides guidance regarding how items

or costs included in beginning inventory in the year of change must be

revalued. Section 1.263A-7(d) provides guidance regarding how non-

inventory property on hand at the beginning of the year of change must

be revalued.

The regulations also provide certain rules that apply to changes in

method of accounting for costs subject to section 263A, in addition to

the rules and procedures that apply under the applicable revenue

procedures. See, Sec. 1.263A-7(b).

In addition, the regulations clarify whether certain changes are

changes in method of accounting under section 263A and therefore are

within the scope of the regulations. For example, a change from one

permissible capitalization method, such as the simplified resale method

in former Sec. 1.263A-1T(d)(4), to another permissible capitalization

method, such as the simplified resale method in Sec. 1.263A-3(d), is a

change in method of accounting under section 263A and is therefore

within the scope of the regulations. See Sec. 1.263A-7(a)(5).

The final regulations delete certain provisions of Sec. 1.263A-7T

that were primarily applicable to accounting method changes made in

1987. For example, the final regulations do not incorporate provisions

such as Sec. 1.263A-7T(e)(2), which provide automatic consent to make

the change in method of accounting for the first taxable year section

263A was effective, and Sec. 1.263A-7T(e)(7) (iii), (iv) and (v) and

Sec. 1.263A-7T(e)(8), which provide special rules for adjusting the

revaluation factor for costs attributable to different methods of

accounting for depreciation (including cost recovery) and differences

in the percentage of fixed indirect production costs that were expensed

by taxpayers using the practical capacity concept.

Certain Administrative Guidance

The final regulations incorporate the provisions of Notice 88-23

(1988-1 C.B. 490) (ordering rules for accounting method changes), and

sections IV(A) (guidance regarding deferred intercompany exchanges) and

IV(B) (permission to elect a new base year for taxpayers using the

last-in, first-out (LIFO) inventory method) of Notice 88-86 (1988-2

C.B. 401). These notices or portions thereof are withdrawn for taxable

years to which this Treasury decision applies.

Effect on Other Documents

The following publications are obsolete as of August 5, 1997:

Notice 88-23 (1988-1 C.B. 490). Notice 88-86 (1988-2 C.B. 401),

sections IV(A) and IV(B).

Public Comments

The IRS and the Treasury Department received a number of comments

in response to the 1987 temporary and proposed regulations. Most of the

comments received in response to the temporary regulations issued in

March 1987 were considered in connection with the temporary regulations

issued in August 1987. In general, those comments are not discussed

again here.

Revaluing Beginning Inventory--the 3-Year Average Method

A. Extending Availability of the Method

Under the temporary regulations, taxpayers using the dollar-value

LIFO inventory method were permitted to use a 3-year average method for

revaluing their beginning inventory in the year they changed their

method of accounting to comply with section 263A. Several commentators

suggested that taxpayers other than those on the dollar-value LIFO

inventory method should also be permitted to use this 3-year average

method for revaluing beginning inventory in the year of change.

Specifically, commentators suggested that the 3-year average method be

made available to taxpayers using the specific goods LIFO inventory

method. Another suggestion was that taxpayers using the first-in,

first-out (FIFO) inventory method should be permitted to use the 3-year

average method even though those taxpayers may have sufficient

information to revalue their inventory under the facts and

circumstances method.

The final regulations do not adopt these suggestions. The House and

Senate Reports to the Tax Reform Act of 1986 indicate Congress intended

that taxpayers generally revalue their inventory in the year of change

using the facts and circumstances method. Because Congress realized

that dollar-value LIFO taxpayers may not have the data needed to use

the facts and circumstances method, it suggested two other revaluation

methods that could be used in conjunction with, or in lieu of, the

facts and circumstances method. The 3-year average method was one of

those other methods. H.R. Rep. No. 426, 99th Cong., 1st Sess. 633-637

(1985), 1986-3 (Vol. 2) C.B. 633-637 and S. Rep. No. 313, 99th Cong.,

2nd Sess. 147-152 (1986), 1986-3 (Vol. 3) C.B. 147-152. The IRS and the

Treasury Department believe that limiting the 3-year average method to

dollar-value LIFO taxpayers is more consistent with legislative history

which expresses Congress' concern that dollar-value LIFO taxpayers may

have particular problems in revaluing inventory. H.R. Rep. No. 426,

633, 1986-3 (Vol. 2) C.B. 633 and S. Rep. No. 313, 147, 1986-3 (Vol.3)

C.B. 147.

B. Altering the Mechanics of the Method

One commentator suggested that taxpayers be permitted to revalue

items or costs included in beginning inventory in the year of change by

using data from the year of change instead of data from the prior three

years, and calculate a section 481(a) adjustment accordingly. This

commentator further suggested that three years after the year of

change, the taxpayer would recompute the section 481(a) adjustment

using data from the three new years to test its original adjustment

under section 481(a). If the new adjustment were larger than the

original adjustment by a substantial amount, the taxpayer would be

required to amend its federal income tax returns. The final regulations

do not adopt this suggestion. Requiring taxpayers to compute two

adjustments under section 481(a) would unnecessarily complicate

application of the 3-year average method.

Another commentator suggested that some taxpayers be permitted to

revalue items or costs included in beginning inventory in the year of

change by using data from the immediately preceding year rather than

the prior three years. This proposal to use only the prior year's data

would be limited to taxpayers that can show they have not had a

significant change in costs over the preceding three years. This

suggested modification to the 3-year average method was not adopted.

The suggested modification would not substantially simplify the process

of revaluing beginning inventory because taxpayers would be required to

determine whether their costs significantly changed during the

preceding three-year period.

C. Limiting Costs Subject to Revaluation

One commentator suggested that LIFO layers should be revalued only

if the items of inventory comprising those layers are still in

existence in the year of change. This suggestion was not adopted.

However, the final regulations continue the rule in the temporary

regulations that taxpayers may adjust the revaluation factor (under

either the 3-year average method or the weighted average method) to the

extent they can show that additional section 263A costs included in the

calculation of the revaluation factor were not incurred in

[[Page 42053]]

the prior years in which the LIFO layers were accumulated.

D. New Base Year

Under the 3-year average method, taxpayers generally are required

to establish a new base year. Several commentators commented that

requiring link-chain LIFO taxpayers to establish a new base year is

costly and pointless and suggested that these taxpayers be excluded

from the general requirement that all dollar-value LIFO taxpayers

establish a new base year. The IRS and the Treasury Department did not

adopt this suggestion. If a new base year is not established, the

current-year index, determined under the taxpayer's new method of

accounting, would be multiplied by the prior-year cumulative index,

determined under the taxpayer's former method of accounting, and could

distort the taxpayer's LIFO inventory valuation. This distortion is

eliminated when the taxpayer establishes a new base year and

establishes a new index. Accordingly, the final regulations provide

that all dollar-value LIFO taxpayers (whether using double extension or

link-chain) should generally establish a new base year when they use

the 3-year average method to revalue their inventories under section

263A.

Commentators also suggested that taxpayers using the 3-year average

method and either the simplified production method or the simplified

resale method be allowed, but not required, to establish a new base

year. Section IV(B) of Notice 88-86 permits these taxpayers to choose

whether to establish a new base year. This rule is incorporated into

the final regulations.

One commentator noted that the example in the 1987 temporary

regulations illustrating the 3-year average method did not use the

current year revaluation factor in computing the updated base year cost

of inventory. The example has been revised to use the current year

revaluation factor.

Revaluing Beginning Inventory--Facts and Circumstances Method

One commentator suggested that specific rules or guidelines be

adopted to clarify what is a reasonable estimate or procedure for

revaluing beginning inventory in connection with a change in method of

accounting. This suggestion was not adopted. What is a reasonable

estimate or procedure must be decided on a case-by-case basis in light

of all applicable facts and circumstances. The final regulations

continue the provision in the temporary regulations that permissible

estimates and procedures include using information from a more recent

period to estimate the amount and nature of inventory costs applicable

to earlier periods, and using information with respect to comparable

items of inventory to estimate the costs associated with other items of

inventory.

New Base Year When the 3-Year Average Method Is Not Used

Several commentators suggested that dollar-value LIFO taxpayers not

using the 3-year average method to revalue beginning inventory be

permitted to update their base year if they so choose. Section IV (B)

of Notice 88-86 permits these taxpayers to establish a new base year.

The final regulations adopt this rule.

Scope of Accounting Method Change

Several commentators suggested that the regulations should allow

taxpayers to change from the specific goods LIFO inventory method to

the dollar-value LIFO inventory method in connection with changing

their method of accounting for costs under section 263A without

obtaining the Commissioner's consent. Generally, taxpayers must secure

the Commissioner's consent before effecting a change in method of

accounting under section 446(e) unless this requirement is specifically

waived. The IRS and the Treasury Department do not believe an exception

from this general rule is warranted for changes from the specific goods

LIFO inventory method to the dollar-value LIFO inventory method except

to the extent permitted by Sec. 1.472-8(f)(1).

Several commentators also suggested that taxpayers that change

their method of accounting for costs subject to section 263A be

permitted to make additional changes in their methods of accounting in

future tax years under section 263A without obtaining additional

consents from the Commissioner. The IRS and the Treasury Department

have issued various revenue procedures that provide automatic consent

procedures for taxpayers to change their method of accounting for costs

under section 263A.

One commentator suggested that the regulations provide that when

making the change from the full absorption rules of Sec. 1.471-11 to

the uniform capitalization rules of section 263A, taxpayers may cease

taking into account any costs not treated as inventoriable under

section 263A that may have been erroneously inventoried under prior

law. The temporary regulations issued in August 1987 and the final

regulations permit this result. In revaluing beginning inventory to

include additional section 263A costs, taxpayers may cease capitalizing

costs that had been capitalized but are not required to be capitalized

under section 263A.

Audit Protection

Several commentators noted that taxpayers should be guaranteed

audit protection for costs or items that are part of a change in method

of accounting under section 263A. The IRS' long-standing administrative

position is that if a taxpayer files an application to change its

method of accounting in accordance with the applicable administrative

guidance, for example, Rev. Proc. 97-27, an examining agent may not

later propose that the taxpayer change its method of accounting for the

same item for a taxable year prior to the year of change.

Ordering Rules

One commentator suggested that overall accounting method changes

(for example, the cash receipts and disbursements method to an accrual

method) should be implemented prior to any change in method of

accounting for costs under section 263A. The temporary regulations

generally provide that a change in method of accounting for costs under

section 263A is deemed to occur prior to any other change in method of

accounting effected during the year of change. The final regulations

continue that general rule with four modifications. Taxpayers that are

discontinuing the LIFO inventory method may make that change prior to a

change in method of accounting under section 263A. Additionally,

taxpayers that are changing from the specific goods LIFO inventory

method to the dollar-value LIFO inventory method may make that change

prior to a change in method of accounting under section 263A. Also,

taxpayers that are changing their overall method of accounting from the

cash method to an accrual method must make the change to an accrual

method prior to a change in method of accounting under section 263A.

Finally, taxpayers that are changing their method of accounting for

depreciation when any portion of the depreciation is subject to section

263A must make the method change for depreciation prior to a change in

method of accounting under section 263A.

Cost Allocation Method

Several commentators suggested that the regulations be clarified to

provide that a taxpayer must use the same cost allocation method to

restate its beginning inventory and to value its ongoing inventory. The

final regulations clarify this point. Inventory on hand at

[[Page 42054]]

the beginning of the year of change is revalued as if the taxpayer's

new method had applied to all prior periods. The same cost allocation

method must be used both retroactively (for purposes of restating

beginning inventory) and prospectively (for purposes of the current

year and all subsequent years, unless the taxpayer seeks specific

consent from the Commissioner to change this method of accounting).

Intercompany Items

One commentator suggested that taxpayers be given automatic consent

to discontinue filing consolidated federal income tax returns so that

they could avoid the need to revalue the amount of intercompany items

resulting from the sale or exchange of inventory property in

intercompany transactions. The regulations do not adopt this

suggestion. Generally, taxpayers must secure the Commissioner's consent

before discontinuing the filing of consolidated tax returns. The IRS

and the Treasury Department do not think an exception from this general

rule is warranted in this situation.

Effective Date

These regulations are effective for taxable years beginning on or

after August 5, 1997.

Special Analyses

It has been determined that this Treasury decision is not a

significant regulatory action as defined in EO 12866. Therefore, a

regulatory assessment is not required. It also has been determined that

section 553(b) of the Administrative Procedure Act (5 U.S.C. chapter 5)

does not apply to these regulations, and because the notice of proposed

rulemaking preceding the regulations was issued prior to March 29,

1996, the Regulatory Flexibility Act (5 U.S.C. chapter 6) does not

apply. Pursuant to section 7805(f) of the Internal Revenue Code, these

regulations were submitted to the Small Business Administration for

comment on their impact on small business.

Drafting Information

The principal author of these regulations is Cheryl Lynn Oseekey,

Office of Assistant Chief Counsel (Income Tax and Accounting). However,

other personnel from the IRS and the Treasury Department participated

in their development.

List of Subjects in 26 CFR Part 1

Income taxes, Reporting and recordkeeping requirements.

Adoption of Amendments to the Regulations

Accordingly, 26 CFR part 1 is amended as follows:

PART 1--INCOME TAXES

Paragraph 1. The authority citation for part 1 continues to read in

part as follows:

Authority: 26 U.S.C. 7805 * * *

Par. 2. Section 1.263A-0 is amended by revising the introductory

text and adding entries for Sec. 1.263A-7 to read as follows:

Sec. 1.263A-0 Outline of regulations under section 263A.

This section lists the paragraphs in Secs. 1.263A-1 through 1.263A-

3 and Sec. 1.263A-7 through 1.263A-15.

* * * * *

Sec. 1.263A-7 Changing a method of accounting under section 263A.

(a) Introduction.

(1) Purpose.

(2) Taxpayers that adopt a method of accounting under section 263A.

(3) Taxpayers that change a method of accounting under section

263A.

(4) Effective date.

(5) Definition of change in method of accounting.

(b) Rules applicable to a change in method of accounting.

(1) General rules.

(2) Special rules.

(i) Ordering rules when multiple changes in method of accounting

occur in the year of change.

(A) In general.

(B) Exceptions to the general ordering rule.

(1) Change from the LIFO inventory method.

(2) Change from the specific goods LIFO inventory method.

(3) Change in overall method of accounting.

(4) Change in method of accounting for depreciation.

(ii) Adjustment required by section 481(a).

(iii) Base year.

(A) Need for a new base year.

(1) Facts and circumstances revaluation method used.

(2) 3-year average method used.

(i) Simplified method not used.

(ii) Simplified method used.

(B) Computing a new base year.

(c) Inventory

(1) Need for adjustments.

(2) Revaluing beginning inventory.

(i) In general.

(ii) Methods to revalue inventory.

(iii) Facts and circumstances revaluation method.

(A) In general.

(B) Exception.

(C) Estimates and procedures allowed.

(D) Use by dollar-value LIFO taxpayers.

(E) Examples.

(iv) Weighted average method.

(A) In general.

(B) Weighted average method for FIFO taxpayers.

(1) In general.

(2) Example.

(C) Weighted average method for specific goods LIFO taxpayers.

(1) In general.

(2) Example.

(D) Adjustments to inventory costs from prior years.

(v) 3-year average method.

(A) In general.

(B) Consecutive year requirement.

(C) Example.

(D) Short taxable years.

(E) Adjustments to inventory costs from prior years.

(1) General rule.

(2) Examples of costs eligible for restatement adjustment

procedure.

(F) Restatement adjustment procedure.

(1) In general.

(2) Examples of restatement adjustment procedure.

(3) Intercompany items.

(i) Revaluing intercompany transactions.

(ii) Example.

(iii) Availability of revaluation methods.

(4) Anti-abuse rule.

(i) In general.

(ii) Deemed avoidance of this section.

(A) Scope.

(B) General rule.

(iii) Election to use transferor's LIFO layers.

(iv) Tax avoidance intent not required.

(v) Related corporation.

(d) Non-inventory property.

(1) Need for adjustments.

(2) Revaluing property.

Sec. 1.263A-1 [Amended]

Par. 3. Section 1.263A-1 is amended by removing ``1.263A-7T(e)

generally'' from the last sentence in paragraph (a)(2)(i) and replacing

it with ``1.263A-7''.

Par. 4. Section 1.263A-7 is added to read as follows:

Sec. 1.263A-7 Changing a method of accounting under section 263A.

(a) Introduction--(1) Purpose. These regulations provide guidance

to taxpayers changing their methods of accounting for costs subject to

section 263A. The principal purpose of these

[[Page 42055]]

regulations is to provide guidance regarding how taxpayers are to

revalue property on hand at the beginning of the taxable year in which

they change their method of accounting for costs subject to section

263A. Paragraph (c) of this section provides guidance regarding how

items or costs included in beginning inventory in the year of change

must be revalued. Paragraph (d) of this section provides guidance

regarding how non-inventory property should be revalued in the year of

change.

(2) Taxpayers that adopt a method of accounting under section 263A.

Taxpayers may adopt a method of accounting for costs subject to section

263A in the first taxable year in which they engage in resale or

production activities. For purposes of this section, the adoption of a

method of accounting has the same meaning as provided in Sec. 1.446-

1(e)(1). Taxpayers are not subject to the provisions of these

regulations to the extent they adopt, as opposed to change, a method of

accounting.

(3) Taxpayers that change a method of accounting under section

263A. Taxpayers changing their method of accounting for costs subject

to section 263A are subject to the revaluation and other provisions of

this section. Taxpayers subject to these regulations include, but are

not limited to--

(i) Resellers of personal property whose average annual gross

receipts for the immediately preceding 3-year period (or lesser period

if the taxpayer was not in existence for the three preceding taxable

years) exceed $10,000,000 where the taxpayer was not subject to section

263A in the prior taxable year;

(ii) Resellers of real or personal property that are using a method

that fails to comply with section 263A and desire to change to a method

of accounting that complies with section 263A;

(iii) Producers of real or tangible personal property that are

using a method that fails to comply with section 263A and desire to

change to a method of accounting that complies with section 263A; and

(iv) Resellers and producers that desire to change from one

permissible method of accounting for costs subject to section 263A to

another permissible method.

(4) Effective date. The provisions of this section are effective

for taxable years beginning on or after August 5, 1997. For taxable

years beginning before August 5, 1997, the rules of Sec. 1.263A-7T

contained in the 26 CFR part 1 edition revised as of April 1, 1997, as

modified by other administrative guidance, will apply.

(5) Definition of change in method of accounting. For purposes of

this section, a change in method of accounting has the same meaning as

provided in Sec. 1.446-1(e)(2)(ii). Changes in method of accounting for

costs subject to section 263A include changes to methods required or

permitted by section 263A and the regulations thereunder. Changes in

method of accounting may be described in the preceding sentence

irrespective of whether the taxpayer's previous method of accounting

resulted in the capitalization of more (or fewer) costs than the costs

required to be capitalized under section 263A and the regulations

thereunder, and irrespective of whether the taxpayer's previous method

of accounting was a permissible method under the law in effect when the

method was being used. However, changes in method of accounting for

costs subject to section 263A do not include changes relating to

factors other than those described therein. For example, a change in

method of accounting for costs subject to section 263A does not include

a change from one inventory identification method to another inventory

identification method, such as a change from the last-in, first-out

(LIFO) method to the first-in, first-out (FIFO) method, or vice versa,

or a change from one inventory valuation method to another inventory

valuation method under section 471, such as a change from valuing

inventory at cost to valuing the inventory at cost or market, whichever

is lower, or vice versa. In addition, a change in method of accounting

for costs subject to section 263A does not include a change within the

LIFO inventory method, such as a change from the double extension

method to the link-chain method, or a change in the method used for

determining the number of pools. Further, a change from the modified

resale method set forth in Notice 89-67 (1989-1 C.B. 723), see

Sec. 601.601(d)(2) of this chapter, to the simplified resale method set

forth in Sec. 1.263A-3(d) is not a change in method of accounting

within the meaning of Sec. 1.446-1(e)(2)(ii) and is therefore not

subject to the provisions of this section. However, a change from the

simplified resale method set forth in former Sec. 1.263A-1T(d)(4) to

the simplified resale method set forth in Sec. 1.263A-3(d) is a change

in method of accounting within the meaning of Sec. 1.446-1(e)(2)(ii)

and is subject to the provisions of this section.

(b) Rules applicable to a change in method of accounting--

(1) General rules. All changes in method of accounting for costs

subject to section 263A are subject to the rules and procedures

provided by the Code, regulations, and administrative procedures

applicable to such changes. The Internal Revenue Service has issued

specific revenue procedures that govern certain accounting method

changes for costs subject to section 263A. Where a specific revenue

procedure is not applicable, changes in method of accounting for costs

subject to section 263A are subject to the same rules and procedures

that govern other accounting method changes. See Rev. Proc. 97-27

(1997-21 I.R.B. 10) and Sec. 601.601(d)(2) of this chapter.

(2) Special rules--(i) Ordering rules when multiple changes in

method of accounting occur in the year of change.

(A) In general. A change in method of accounting for costs subject

to section 263A is generally deemed to occur (including the computation

of the adjustment under section 481(a)) before any other change in

method of accounting is deemed to occur for that same taxable year.

(B) Exceptions to the general ordering rule--(1) Change from the

LIFO inventory method. In the case of a taxpayer that is discontinuing

its use of the LIFO inventory method in the same taxable year it is

changing its method of accounting for costs subject to section 263A,

the change from the LIFO method may be made before the change in method

of accounting (and the computation of the corresponding adjustment

under section 481 (a)) under section 263A is made.

(2) Change from the specific goods LIFO inventory method. In the

case of a taxpayer that is changing from the specific goods LIFO

inventory method to the dollar-value LIFO inventory method in the same

taxable year it is changing its method of accounting for costs subject

to section 263A, the change from the specific goods LIFO inventory

method may be made before the change in method of accounting under

section 263A is made.

(3) Change in overall method of accounting. In the case of a

taxpayer that is changing its overall method of accounting from the

cash receipts and disbursements method to an accrual method in the same

taxable year it is changing its method of accounting for costs subject

to section 263A, the taxpayer must change to an accrual method for

capitalizable costs (see Sec. 1.263A-1(c)(2)(ii)) before the change in

method of accounting (and the computation of the corresponding

adjustment under section 481(a)) under section 263A is made.

(4) Change in method of accounting for depreciation. In the case of

a

[[Page 42056]]

taxpayer that is changing its method of accounting for depreciation in

the same taxable year it is changing its method of accounting for costs

subject to section 263A and any portion of the depreciation is subject

to section 263A, the change in method of accounting for depreciation

must be made before the change in method of accounting (and the

computation of the corresponding adjustment under section 481(a)) under

section 263A is made.

(ii) Adjustment required by section 481(a). In the case of any

taxpayer required or permitted to change its method of accounting for

any taxable year under section 263A and the regulations thereunder, the

change will be treated as initiated by the taxpayer for purposes of the

adjustment required by section 481(a). The adjustment required by

section 481(a) is to be taken into account in computing taxable income

over a period not to exceed 4 taxable years.

(iii) Base year--(A) Need for a new base year. Certain dollar-value

LIFO taxpayers (whether using double extension or link-chain) must

establish a new base year when they revalue their inventories under

section 263A.

(1) Facts and circumstances revaluation method used. A dollar-value

LIFO taxpayer that uses the facts and circumstances revaluation method

is permitted, but not required, to establish a new base year.

(2) 3-year average method used--(i) Simplified method not used. A

dollar-value LIFO taxpayer using the 3-year average method but not the

simplified production method or the simplified resale method to revalue

its inventory is required to establish a new base year.

(ii) Simplified method used. A dollar-value LIFO taxpayer using the

3-year average method and either the simplified production method or

the simplified resale method to revalue its inventory is permitted, but

not required, to establish a new base year.

(B) Computing a new base year. For purposes of determining future

indexes, the year of change becomes the new base year (that is, the

index at the beginning of the year of change generally must be 1.00)

and all costs are restated in new base year costs for purposes of

extending such costs in future years. However, when a new base year is

established, costs associated with old layers retain their separate

identity within the base year, with such layers being restated in terms

of the new base year index. For example, for purposes of determining

whether a particular layer has been invaded, each layer must retain its

separate identity. Thus, if a decrement in an inventory pool occurs,

layers accumulated in more recent years must be viewed as invaded

first, in order of priority.

(c) Inventory--(1) Need for adjustments. When a taxpayer changes

its method of accounting for costs subject to section 263A, the

taxpayer generally must, in computing its taxable income for the year

of change, take into account the adjustments required by section

481(a). The adjustments required by section 481(a) relate to

revaluations of inventory property, whether the taxpayer produces the

inventory or acquires it for resale. See paragraph (d) of this section

in regard to the adjustments required by section 481(a) that relate to

non-inventory property.

(2) Revaluing beginning inventory--(i) In general. If a taxpayer

changes its method of accounting for costs subject to section 263A, the

taxpayer must revalue the items or costs included in its beginning

inventory in the year of change as if the new method (that is, the

method to which the taxpayer is changing) had been in effect during all

prior years. In revaluing inventory costs under this procedure, all of

the capitalization provisions of section 263A and the regulations

thereunder apply to all inventory costs accumulated in prior years. The

necessity to revalue beginning inventory as if these capitalization

rules had been in effect for all prior years includes, for example, the

revaluation of costs or layers incurred in taxable years preceding the

transition period to the full absorption method of inventory costing as

described in Sec. 1.471-11(e), regardless of whether a taxpayer

employed a cut-off method under those regulations. The difference

between the inventory as originally valued using the former method

(that is, the method from which the taxpayer is changing) and the

inventory as revalued using the new method is equal to the amount of

the adjustment required under section 481(a).

(ii) Methods to revalue inventory. There are three methods

available to revalue inventory. The first method, the facts and

circumstances revaluation method, may be used by all taxpayers. Under

this method, a taxpayer determines the direct and indirect costs that

must be assigned to each item of inventory based on all the facts and

circumstances. This method is described in paragraph (c)(2)(iii) of

this section. The second method, the weighted average method, is

available only in certain situations to taxpayers using the FIFO

inventory method or the specific goods LIFO inventory method. This

method is described in paragraph (c)(2)(iv) of this section. The third

method, the 3-year average method, is available to all taxpayers using

the dollar-value LIFO inventory method of accounting. This method is

described in paragraph (c)(2)(v) of this section. The weighted average

method and the 3-year average method revalue inventory through

processes of estimation and extrapolation, rather than based on the

facts and circumstances of a particular year's data. All three methods

are available regardless of whether the taxpayer elects to use a

simplified method to capitalize costs under section 263A.

(iii) Facts and circumstances revaluation method--(A) In general.

Under the facts and circumstances revaluation method, a taxpayer

generally is required to revalue inventories by applying the

capitalization rules of section 263A and the regulations thereunder to

the production and resale activities of the taxpayer, with the same

degree of specificity as required of inventory manufacturers under the

law immediately prior to the effective date of the Tax Reform Act of

1986 (Pub. L. 99-514, 100 Stat. 2085, 1986-3 C.B. (Vol. 1)). Thus, for

example, with respect to any prior year that is relevant in determining

the total amount of the revalued balance as of the beginning of the

year of change, the taxpayer must analyze the production and resale

data for that particular year and apply the rules and principles of

section 263A and the regulations thereunder to determine the

appropriate revalued inventory costs. However, under the facts and

circumstances revaluation method, a taxpayer may utilize reasonable

estimates and procedures in valuing inventory costs if--

(1) The taxpayer lacks, and is not able to reconstruct from its

books and records, actual financial and accounting data which is

required to apply the capitalization rules of section 263A and the

regulations thereunder to the relevant facts and circumstances

surrounding a particular item of inventory or cost; and

(2) The total amounts of costs for which reasonable estimates and

procedures are employed are not significant in comparison to the total

restated value (including costs previously capitalized under the

taxpayer's former method) of the items or costs for the period in

question.

(B) Exception. A taxpayer that is not able to comply with the

requirement of paragraph (c)(2)(iii)(A)(2) of this section because of

the existence of a significant amount of costs that would require the

use of estimates and procedures must

[[Page 42057]]

revalue its inventories under the procedures provided in paragraph

(c)(2)(iv) or (v) of this section.

(C) Estimates and procedures allowed. The estimates and procedures

of this paragraph (c)(2)(iii) include--

(1) The use of available information from more recent years to

estimate the amount and nature of inventory costs applicable to earlier

years; and

(2) The use of available information with respect to comparable

items of inventory produced or acquired during the same year in order

to estimate the costs associated with other items of inventory.

(D) Use by dollar-value LIFO taxpayers. Generally, a dollar-value

LIFO taxpayer must recompute its LIFO inventory for each taxable year

that the LIFO inventory method was used.

(E) Examples. The provisions of this paragraph (c)(2)(iii) are

illustrated by the following three examples. The principles set forth

in these examples are applicable both to production and resale

activities and the year of change in all three examples is 1997. The

examples read as follows:

Example 1. Taxpayer X lacks information for the years 1993 and

earlier, regarding the amount of costs incurred in transporting

finished goods from X's factory to X's warehouse and in storing

those goods at the warehouse until their sale to customers. X

determines that, for 1994 and subsequent years, these transportation

and storage costs constitute 4 percent of the total costs of

comparable goods under X's method of accounting for such years.

Under this paragraph (c)(2)(iii), X may assume that transportation

and storage costs for the years 1993 and earlier constitute 4

percent of the total costs of such goods.

Example 2. Assume the same facts as in Example 1, except that

for the year 1993 and earlier, X used a different method of

accounting for inventory costs whereunder significantly fewer costs

were capitalized than amounts capitalized in later years. Thus, the

application of transportation and storage based on a percentage of

costs for 1994 and later years would not constitute a reasonable

estimate for use in earlier years. X may use the information from

1994 and later years, if appropriate adjustments are made to reflect

the differences in inventory costs for the applicable years,

including, for example--

(i) Increasing the percentage of costs that are intended to

represent transportation and storage costs to reflect the aggregate

differences in capitalized amounts under the two methods of

accounting; or

(ii) Taking the absolute dollar amount of transportation and

storage costs for comparable goods in inventory and applying that

amount (adjusted for changes in general price levels, where

appropriate) to goods associated with 1993 and prior periods.

Example 3. Taxpayer Z lacks information for certain years with

respect to factory administrative costs, subject to capitalization

under section 263A and the regulations thereunder, incurred in the

production of inventory in factory A. Z does have sufficient

information to determine factory administrative costs with respect

to production of inventory in factory B, wherein inventory items

were produced during the same years as factory A. Z may use the

information from factory B to determine the appropriate amount of

factory administrative costs to capitalize as inventory costs for

comparable items produced in factory A during the same years.

(iv) Weighted average method--(A) In general. A taxpayer using the

FIFO method or the specific goods LIFO method of accounting for

inventories may use the weighted average method as provided in this

paragraph (c)(2)(iv) to estimate the change in the amount of costs that

must be allocated to inventories for prior years. The weighted average

method under this paragraph (c)(2)(iv) is only available to a taxpayer

that lacks sufficient data to revalue its inventory costs under the

facts and circumstances revaluation method provided for in paragraph

(c)(2)(iii) of this section. Moreover, a taxpayer that qualifies for

the use of the weighted average method under this paragraph (c)(2)(iv)

must utilize such method only with respect to items or costs for which

it lacks sufficient information to revalue under the facts and

circumstances revaluation method. Particular items or costs must be

revalued under the facts and circumstances revaluation method if

sufficient information exists to make such a revaluation. If a taxpayer

lacks sufficient information to otherwise apply the weighted average

method under this paragraph (c)(2)(iv) (for example, the taxpayer is

unable to revalue the costs of any of its items in inventory due to a

lack of information), then the taxpayer must use reasonable estimates

and procedures, as described in the facts and circumstances revaluation

method, to whatever extent is necessary to allow the taxpayer to apply

the weighted average method.

(B) Weighted average method for FIFO taxpayers--(1) In general.

This paragraph (c)(2)(iv)(B) sets forth the mechanics of the weighted

average method as applicable to FIFO taxpayers. Under the weighted

average method, an item in ending inventory for which sufficient data

is not available for revaluation under section 263A and the regulations

thereunder must be revalued by using the weighted average percentage

increase or decrease with respect to such item for the earliest

subsequent taxable year for which sufficient data is available. With

respect to an item for which no subsequent data exists, such item must

be revalued by using the weighted average percentage increase or

decrease with respect to all reasonably comparable items in the

taxpayer's inventory for the same year or the earliest subsequent

taxable year for which sufficient data is available.

(2) Example. The provisions of this paragraph (c)(2)(iv)(B) are

illustrated by the following example. The principles set forth in this

example are applicable both to production and resale activities and the

year of change in the example is 1997. The example reads as follows:

Example. Taxpayer A manufactures bolts and uses the FIFO method

to identify inventories. Under A's former method, A did not

capitalize all of the costs required to be capitalized under section

263A. A maintains inventories of bolts, two types of which it no

longer produces. Bolt A was last produced in 1994. The revaluation

of the costs of Bolt A under this section for bolts produced in 1994

results in a 20 percent increase of the costs of Bolt A. A portion

of the inventory of Bolt A, however, is attributable to 1993. A does

not have sufficient data for revaluation of the 1993 cost for Bolt

A. With respect to Bolt A, A may apply the 20 percent increase

determined for 1994 to the 1993 production as an acceptable

estimate. Bolt B was last produced in 1992 and no data exists that

would allow revaluation of the inventory cost of Bolt B. The

inventories of all other bolts for which information is available

are attributable to 1994 and 1995. Revaluation of the costs of these

other bolts using available data results in an average increase in

inventory costs of 15 percent for 1994 production. With respect to

Bolt B, the overall 15 percent increase for A's inventory for 1994

may be used in revaluing the cost of Bolt B.

(C) Weighted average method for specific goods LIFO taxpayers--(1)

In general. This paragraph (c)(2)(iv)(C) sets forth the mechanics of

the weighted average method as applicable to LIFO taxpayers using the

specific goods method of valuing inventories. Under the weighted

average method, the inventory layers with respect to an item for which

data is available are revalued under this section and the increase or

decrease in amount for each layer is expressed as a percentage of

change from the cost in the layer as originally valued. A weighted

average of the percentage of change for all layers for each type of

good is computed and applied to all earlier layers for each type of

good that lack sufficient data to allow for revaluation. In the case of

earlier layers for which sufficient data exists, such layers are to be

revalued using actual data. In cases where sufficient data is not

available to make a weighted average estimate with respect to a

particular item of inventory, a weighted average increase or decrease

is to be determined using all other inventory items revalued by the

taxpayer in the

[[Page 42058]]

same specific goods grouping. This percentage increase or decrease is

then used to revalue the cost of the item for which data is lacking. If

the taxpayer lacks sufficient data to revalue any of the inventory

items contained in a specific goods grouping, then the weighted average

increase or decrease of substantially similar items (as determined by

principles similar to the rules applicable to dollar-value LIFO

taxpayers in Sec. 1.472-8(b)(3)) must be applied in the revaluation of

the items in such grouping. If insufficient data exists with respect to

all the items in a specific goods grouping and to all items that are

substantially similar (or such items do not exist), then the weighted

average for all revalued items in the taxpayer's inventory must be

applied in revaluing items for which data is lacking.

(2) Example. The provisions of this paragraph (c)(2)(iv)(C) are

illustrated by the following example. The principles set forth in this

example are applicable both to production and resale activities and the

year of change in the example is 1997. The example reads as follows:

Example. (i) Taxpayer M is a manufacturer that produces two

different parts. Under M's former method, M did not capitalize all

of the costs required to be capitalized under section 263A. Work-in-

process inventory is recorded in terms of equivalent units of

finished goods. M's records show the following at the end of 1996

under the specific goods LIFO inventory method:

----------------------------------------------------------------------------------------------------------------

Carrying

LIFO Product and layer Number Cost values

----------------------------------------------------------------------------------------------------------------

Product #1:

1993........................................................ 150 $5.00 $750

1994........................................................ 100 6.00 600

1995........................................................ 100 6.50 650

1996........................................................ 50 7.00 350

-----------------------------------------------

$2,350

Product #2:

1993........................................................ 200 $4.00 $800

1994........................................................ 200 4.50 900

1995........................................................ 100 5.00 500

1996........................................................ 100 6.00 600

-----------------------------------------------

2,800

===============================================

Total carrying value of Products #1 and #2 under M's

former method.......................................... .............. .............. 5,150

----------------------------------------------------------------------------------------------------------------

(ii) M has sufficient data to revalue the unit costs of Product

#1 using its new method for 1994, 1995 and 1996. These costs are:

$7.00 in 1994, $7.75 in 1995, and $9.00 in 1996. This data for

Product #1 results in a weighted average percentage change of 20.31

percent

((100 x ($7.00-$6.00))+(100 x ($7.75-$6.50))+(50 x ($9.00-$7.00))

divided by (100 x $6.00) + (100 x $6.50) + (50 x $7.00)]. M has

sufficient data to revalue the unit costs of Product #2 only in 1995

and 1996. These costs are: $6.00 in 1995 and $7.00 in 1996. This

data for Product #2 results in a weighted average percentage change

of 18.18 percent [(100 x ($6.00-$5.00))+(100 x ($7.00-$6.00))

divided by (100 x $5.00)+(100 x $6.00)].

(iii) M can estimate its revalued costs for Product #1 for 1993

by applying the weighted average increase computed for Product #1

(20.31 percent) to the unit costs originally carried on M's records

for 1993 under M's former method. The estimated revalued unit cost

of Product #1 would be $6.02 ($5.00 x 1.2031). M estimates its

revalued costs for Product #2 for 1993 and 1994 in a similar

fashion. M applies the weighted average increase determined for

Product #2 (18.18 percent) to the unit costs of $4.00 and $4.50 for

1993 and 1994 respectively. The revalued unit costs of Product #2

are $4.73 for 1993 ($4.00 x 1.1818) and $5.32 for 1994

($4.50 x 1.1818).

(iv) M's inventory would be revalued as follows:

----------------------------------------------------------------------------------------------------------------

Carrying

LIFO product and layer Number Cost values

----------------------------------------------------------------------------------------------------------------

Product #1:

1993........................................................ 150 $6.02 $903

1994........................................................ 100 7.00 700

1995........................................................ 100 7.75 775

1996........................................................ 50 9.00 450

-----------------------------------------------

$2,828

Product #2:

1993........................................................ 200 4.73 946

1994........................................................ 200 5.32 1,064

1995........................................................ 100 6.00 600

1996........................................................ 100 7.00 700

-----------------------------------------------

3,310

Total value of Products #1 and #2 as revalued under M's

new method............................................. .............. .............. 6,138

===============

Total amount of adjustment required under section 481(a)

[$6,138-$5,150]........................................ .............. .............. 988

----------------------------------------------------------------------------------------------------------------

(D) Adjustments to inventory costs from prior years. For special

rules applicable when a revaluation using the weighted average method

includes costs not incurred in prior years, see paragraph (c)(2)(v)(E)

of this section.

(v) 3-year average method--(A) In general. A taxpayer using the

dollar-value LIFO method of accounting for inventories may revalue all

existing LIFO layers of a trade or business based on the 3-year average

method as

[[Page 42059]]

provided in this paragraph (c)(2)(v). The 3-year average method is

based on the average percentage change (the 3-year revaluation factor)

in the current costs of inventory for each LIFO pool based on the three

most recent taxable years for which the taxpayer has sufficient

information (typically, the three most recent taxable years of such

trade or business). The 3-year revaluation factor is applied to all

layers for each pool in beginning inventory in the year of change. The

3-year average method is available to any dollar-value taxpayer that

complies with the requirements of this paragraph (c)(2)(v) regardless

of whether such taxpayer lacks sufficient data to revalue its inventory

costs under the facts and circumstances revaluation method prescribed

in paragraph (c)(2)(iii) of this section. The 3-year average method

must be applied with respect to all inventory in a taxpayer's trade or

business. A taxpayer is not permitted to apply the method for the

revaluation of some, but not all, inventory costs on the basis of

pools, business units, or other measures of inventory amounts that do

not constitute a separate trade or business. Generally, a taxpayer

revaluing its inventory using the 3-year average method must establish

a new base year. See, paragraph (b)(2)(iii)(A)(2)(i) of this section.

However, a dollar-value LIFO taxpayer using the 3-year average method

and either the simplified production method or the simplified resale

method to revalue its inventory is permitted, but not required, to

establish a new base year. See, paragraph (b)(2)(iii)(A)(2)(ii) of this

section. If a taxpayer lacks sufficient information to otherwise apply

the 3-year average method under this paragraph (c)(2)(v) (for example,

the taxpayer is unable to revalue the costs of any of its LIFO pools

for three years due to a lack of information), then the taxpayer must

use reasonable estimates and procedures, as described in the facts and

circumstances revaluation method under paragraph (c)(2)(iii) of this

section, to whatever extent is necessary to allow the taxpayer to apply

the 3-year average method.

(B) Consecutive year requirement. Under the 3-year average method,

if sufficient data is available to calculate the revaluation factor for

more than three years, the taxpayer may use data from such additional

years in determining the average percentage increase or decrease only

if the additional years are consecutive to and prior to the year of

change. The requirement under the preceding sentence to use consecutive

years is applicable under this method regardless of whether any

inventory costs in beginning inventory as of the year of change are

viewed as incurred in, or attributable to, those consecutive years

under the LIFO inventory method. Thus, the requirement to use data from

consecutive years may result in using information from a year in which

no LIFO increment occurred. For example, if a taxpayer is changing its

method of accounting in 1997 and has sufficient data to revalue its

inventory for the years 1991 through 1996, the taxpayer may calculate

the revaluation factor using all six years. If, however, the taxpayer

has sufficient data to revalue its inventory for the years 1990 through

1992, and 1994 through 1996, only the three years consecutive to the

year of change, that is, 1994 through 1996, may be used in determining

the revaluation factor. Similarly, for example, a taxpayer with LIFO

increments in 1995, 1993, and 1992 may not calculate the revaluation

factor based on the data from those years alone, but instead must use

the data from consecutive years for which the taxpayer has information.

(C) Example. The provisions of this paragraph (c)(2)(v) are

illustrated by the following example. The principles set forth in this

example are applicable both to production and resale activities and the

year of change in the example is 1997. The example reads as follows:

Example. (i) Taxpayer G, a calendar year taxpayer, is a reseller

that is required to change its method of accounting under section

263A. G will not use either the simplified production method or the

simplified resale method. G adopted the dollar-value LIFO inventory

method in 1991, using a single pool and the double extension method.

G's beginning LIFO inventory as of January 1, 1997, computed using

its former method, for the year of change is as follows:

----------------------------------------------------------------------------------------------------------------

Base year LIFO carrying

costs Index value

----------------------------------------------------------------------------------------------------------------

Base layer $14,000 1.00 $14,000

1991 layer...................................................... 4,000 1.20 4,800

1992 layer...................................................... 5,000 1.30 6,500

1993 layer...................................................... 2,000 1.35 2,700

1994 layer...................................................... 0 1.40 0

1995 layer...................................................... 4,000 1.50 6,000

1996 layer...................................................... 5,000 1.60 8,000

-----------------------------------------------

Total....................................................... 34,000 .............. 42,000

----------------------------------------------------------------------------------------------------------------

(ii) G is able to recompute total inventoriable costs incurred

under its new method for the three preceding taxable years as

follows:

----------------------------------------------------------------------------------------------------------------

Current cost

as recorded Current cost Percentage

(former as adjusted change

method) (new method)

----------------------------------------------------------------------------------------------------------------

1994............................................................ $35,000 $45,150 .29

1995............................................................ 43,500 54,375 .25

1996............................................................ 54,400 70,720 .30

-----------------------------------------------

Total....................................................... 132,900 170,245 .28

----------------------------------------------------------------------------------------------------------------

(iii) Applying the average revaluation factor of .28 to each

layer, G's inventory is restated as follows:

----------------------------------------------------------------------------------------------------------------

Restated base Restated LIFO

year costs Index carrying value

----------------------------------------------------------------------------------------------------------------

Base layer...................................................... $17,920 1.00 $17,920

[[Page 42060]]

1991 layer...................................................... 5,120 1.20 6,144

1992 layer...................................................... 6,400 1.30 8,320

1993 layer...................................................... 2,560 1.35 3,456

1994 layer...................................................... 0 1.40 0

1995 layer...................................................... 5,120 1.50 7,680

1996 layer...................................................... 6,400 1.60 10,240

-----------------------------------------------

Total....................................................... 43,520 .............. 53,760

----------------------------------------------------------------------------------------------------------------

(iv) The adjustment required by section 481(a) is $11,760. This

amount may be computed by multiplying the average percentage of .28

by the LIFO carrying value of G's inventory valued using its former

method ($42,000). Alternatively, the adjustment required by section

481(a) may be computed by the difference between--

(A) The revalued costs of the taxpayer's inventory under its new

method ($53,760), and

(B) The costs of the taxpayer's inventory using its former

method ($42,000).

(v) In addition, the inventory as of the first day of the year

of change (January 1, 1997) becomes the new base year cost for

purposes of determining the LIFO index in future years. See,

paragraphs (b)(2)(iii)(A)(2)(i) and (b)(2)(iii)(B) of this section.

This requires that layers in years prior to the base year be

restated in terms of the new base year index. The current year cost

of G's inventory, as adjusted, is $70,720. Such cost must be

apportioned to each layer in proportion to the restated base year

cost of that layer to total restated base year costs ($43,520), as

follows:

----------------------------------------------------------------------------------------------------------------

Restated base Restated LIFO

year costs Restated index carrying value

----------------------------------------------------------------------------------------------------------------

Old base layer.................................................. $29,120 .615 $17,920

1991 layer...................................................... 8,320 .738 6,144

1992 layer...................................................... 10,400 .80 8,320

1993 layer...................................................... 4,160 .831 3,456

1994 layer...................................................... 0 .............. 0

1995 layer...................................................... 8,320 .923 7,680

1996 layer...................................................... 10,400 .985 10,240

-----------------------------------------------

Total................................................... 70,720 .............. 53,760

----------------------------------------------------------------------------------------------------------------

(D) Short taxable years. A short taxable year is treated as a full

12 months.

(E) Adjustments to inventory costs from prior years--(1) General

rule--(i) The use of the revaluation factor, based on current costs, to

estimate the revaluation of prior inventory layers under the 3-year

average method, as described in paragraph (c)(2)(v) of this section,

may result in an allocation of costs that include amounts attributable

to costs not incurred during the year in which the layer arose. To the

extent a taxpayer can demonstrate that costs that contributed to the

determination of the revaluation factor could not have affected a prior

year, the revaluation factor as applied to that year may be adjusted

under the restatement adjustment procedure, as described in paragraph

(c)(2)(v)(F) of this section. The determination that a cost could not

have affected a prior year must be made by a taxpayer only upon showing

that the type of cost incurred during the years used to calculate the

revaluation factor (revaluation years) was not present during such

prior year. An item of cost will not be eligible for the restatement

adjustment procedure simply because the cost varies in amount from year

to year or the same type of cost is described or referred to by a

different name from year to year. Thus, the restatement adjustment

procedure allowed under paragraph (c)(2)(v)(F) of this section is not

available in a prior year with respect to a particular cost if the same

type of cost was incurred both in the revaluation years and in such

prior year, although the amount of such cost and the name or

description thereof may vary.

(ii) The provisions of this paragraph (c)(2)(v)(E) are also

applicable to taxpayers using the weighted average method in revaluing

inventories under paragraph (c)(2)(iv) of this section. Thus, to the

extent a taxpayer can demonstrate that costs that contributed to the

determination of the restatement of a particular year or item could not

have affected a prior year or item, the taxpayer may adjust the

revaluation of that prior year or item accordingly under the weighted

average method. All the requirements and definitions, however,

applicable to the restatement adjustment procedure under this paragraph

(c)(2)(v)(E) fully apply to a taxpayer using the weighted average

method to revalue inventories.

(2) Examples of costs eligible for restatement adjustment

procedure. The provisions of this paragraph (c)(2)(v)(E) are

illustrated by the following four examples. The principles set forth in

these examples are applicable both to production and resale activities

and the year of change in the four examples is 1997. The examples read

as follows:

Example 1. Taxpayer A is a reseller that introduced a defined

benefit pension plan in 1994, and made the plan available to

personnel whose labor costs were (directly or indirectly) properly

allocable to resale activities. A determines the revaluation factor

based on data available for the years 1994 through 1996, for which

the pension plan was in existence. Based on these facts, the costs

of the pension plan in the revaluation years are eligible for the

restatement adjustment procedure for years prior to 1994.

Example 2. Assume the same facts as in Example 1, except that a

defined contribution plan was available, during prior years, to

personnel whose labor costs were properly allocable to resale

activities. The defined contribution plan was terminated before the

introduction of the defined benefit plan in 1994. Based on these

facts, the costs of the defined benefit pension plan in the

revaluation years are not eligible for the restatement adjustment

procedure with respect to years for which the defined contribution

plan existed.

Example 3. Taxpayer C is a manufacturer that established a

security department in 1995 to patrol and safeguard its production

and warehouse areas used in C's trade or business. Prior to 1995, C

had not been required to utilize security personnel in its trade or

business; C established the security department in 1995 in response

to increasing vandalism and theft at its plant locations. Based on

these facts, the costs of the security

[[Page 42061]]

department are eligible for the restatement adjustment procedure for

years prior to 1995.

Example 4. Taxpayer D is a reseller that established a payroll

department in 1995 to process the company's weekly payroll. In the

years 1991 through 1994, D engaged the services of an outside vendor

to process the company's payroll. Prior to 1991, D's payroll

processing was done by D's accounting department, which was

responsible for payroll processing as well as for other accounting

functions. Based on these facts, the costs of the payroll department

are not eligible for the restatement adjustment procedure. D was

incurring the same type of costs in earlier years as D was incurring

in the payroll department in 1995 and subsequent years, although

these costs were designated by a different name or description.

(F) Restatement adjustment procedure--(1) In general--(i) This

paragraph (c)(2)(v)(F) provides a restatement adjustment procedure

whereunder a taxpayer may adjust the restatement of inventory costs in

prior taxable years in order to produce a different restated value than

the value that would otherwise occur through application of the

revaluation factor to such prior taxable years.

(ii) Under the restatement adjustment procedure as applied to a

particular prior year, a taxpayer must determine the particular items

of cost that are eligible for the restatement adjustment with respect

to such prior year. The taxpayer must then recompute, using reasonable

estimates and procedures, the total inventoriable costs that would have

been incurred for each revaluation year under the taxpayer's former

method and the taxpayer's new method by making appropriate adjustments

in the data for such revaluation year to reflect the particular costs

eligible for adjustment.

(iii) The taxpayer must then compute the total percentage change

with respect to each revaluation year, using the revised estimates of

total inventoriable costs for such year as described in paragraph

(c)(2)(v)(F)(1)(ii) of this section. The percentage change must be

determined by calculating the ratio of the revised total of the

inventoriable costs for such revaluation year under the taxpayer's new

method to the revised total of the inventoriable costs for such

revaluation year under the taxpayer's former method.

(iv) An average of the resulting percentage change for all

revaluation years is then calculated, and the resulting average is

applied to the prior year in issue.

(2) Examples of restatement adjustment procedure. The provisions of

this paragraph (c)(2)(v)(F) are illustrated by the following two

examples. The principles set forth in these examples are applicable

both to production and resale activities and the year of change in the

two examples is 1997. The examples read as follows:

Example 1. Taxpayer A is a reseller that is eligible to make a

restatement adjustment by reason of the costs of a defined benefit

pension plan that was introduced in 1994, during the revaluation

period. The revaluation factor, before adjustment of data to reflect

the pension costs, is as provided in the example in paragraph

(c)(2)(v)(C) of this section. Thus, for example, with respect to the

year 1994, the total inventoriable costs under A's former method is

$35,000, the total inventoriable costs under A's new method is

$45,150, and the percentage change is .29. Under the method of

accounting used by A during 1994 (the former method), none of the

pension costs were included as inventoriable costs. Thus, under the

restatement adjustment procedure, the total inventoriable cost under

A's former method would remain at $35,000 if the pension plan had

not been in existence. Similarly, A determines that the total

inventoriable costs for 1994 under A's new method, if the pension

plan had not been in existence, would have been $42,000. The

restatement adjustment for 1994 determined under this paragraph

(c)(2)(v)(F) would then be equal to .20 ([$42,000-$35,000]/$35,000).

A would make similar calculations with respect to 1995 and 1996. The

average of such amounts for each of the three years in the

revaluation period would then be determined as in the example in

paragraph (c)(2)(v)(C) of this section. Such average would be used

to revalue cost layers for years for which the pension plan was not

in existence. Such revalued layers would then be viewed as restated

in compliance with the requirements of this paragraph. With respect

to cost layers incurred during years for which the pension plan was

in existence, no adjustment of the revaluation factor would occur.

Example 2. Assume the same facts as in Example 1, except that a

portion of the pension costs were included as inventoriable costs

under the method used by A during 1994 (the former method). Under

the restatement adjustment procedure, A determines that the total

inventoriable costs for 1994 under the former method, if the pension

plan had not been in existence, would have been $34,000. Similarly,

A determines that the total inventoriable costs for 1994 under A's

new method, if the pension plan had not been in existence, would

have been $42,000. The restatement adjustment for 1994 determined

under this paragraph (c)(2)(v)(F) would then be equal to .24

([$42,000-$34,000]/$34,000). A would make similar calculations with

respect to 1995 and 1996. The average of such amounts for each of

the three years in the revaluation period would then be determined

as in the example in paragraph (c)(2)(v)(C) of this section. Such

average would be used to revalue cost layers for years for which the

pension plan was not in existence.

(3) Intercompany items--(i) Revaluing intercompany transactions.

Pursuant to any change in method of accounting for costs subject to

section 263A, taxpayers are required to revalue the amount of any

intercompany item resulting from the sale or exchange of inventory

property in an intercompany transaction to an amount equal to the

intercompany item that would have resulted, had the cost of goods sold

for that inventory property been determined under the taxpayer's new

method. The requirement of the preceding sentence applies with respect

to both inventory produced by a taxpayer and inventory acquired by the

taxpayer for resale. In addition, the requirements of this paragraph

(c)(3) apply only to any intercompany item of the taxpayer as of the

beginning of the year of change in method of accounting. See

Sec. 1.1502-13(b)(2)(ii). A taxpayer must revalue the amount of any

intercompany item only if the inventory property sold in the

intercompany transaction is held as inventory by a buying member as of

the date the taxpayer changes its method of accounting under section

263A. Corresponding changes to the adjustment required under section

481(a) must be made with respect to any adjustment of the intercompany

item required under this paragraph (c)(3). Moreover, the requirements

of this paragraph (c)(3) apply regardless of whether the taxpayer has

any items in beginning inventory as of the year of change in method of

accounting. See Sec. 1.1502-13 for the definition of intercompany

transaction.

(ii) Example. The provisions of this paragraph (c)(3) are

illustrated by the following example. The principles set forth in this

example are applicable both to production and resale activities and the

year of change in the example is 1997. The example reads as follows:

Example. (i) Assume that S, a member of a consolidated group

filing its federal income tax return on a calendar year,

manufactures and sells inventory property to B, a member of the same

consolidated group, in 1996. The sale between S and B is an

intercompany transaction as defined under Sec. 1.1502-13(b)(1). The

gain from the intercompany transaction is an intercompany item to S

under Sec. 1.1502-13(b)(2). As of the beginning of the year of

change in method of accounting (January 1, 1997), the inventory

property is still held by B based on the particular inventory method

of accounting used by B for federal income tax purposes (for

example, the LIFO or FIFO inventory method). The property was sold

by S to B in 1996 for $150; the cost of goods sold with respect to

the property under the method in effect at the time the inventory

was produced was $100, resulting in an intercompany item of $50 to S

under Sec. 1.1502-13. As of January 1, 1997, S still has an

intercompany item of $50.

(ii) S is required to revalue the amount of its intercompany

item to an amount equal to what the intercompany item would have

[[Page 42062]]

been had the cost of goods sold for that inventory property been

determined under S's new method. Assume that the cost of the

inventory under this method would have been $110, had the method

applied to S's manufacture of the property in 1996. Thus, S is

required to revalue the amount of its intercompany item to $40 (that

is, $150 less $110), necessitating a negative adjustment to the

intercompany item of $10. Moreover, S is required to increase its

adjustment under section 481(a) by $10 in order to prevent the

omission of such amount by virtue of the decrease in the

intercompany item.

(iii) Availability of revaluation methods. In revaluing the amount

of any intercompany item resulting from the sale or exchange of

inventory property in an intercompany transaction to an amount equal to

the intercompany item that would have resulted had the cost of goods

sold for that inventory property been determined under the taxpayer's

new method, a taxpayer may use the other methods and procedures

otherwise properly available to that particular taxpayer in revaluing

inventory under section 263A and the regulations thereunder, including,

if appropriate, the various simplified methods provided in section 263A

and the regulations thereunder and the various procedures described in

this paragraph (c).

(4) Anti-abuse rule--(i) In general. Section 263A(i)(1) provides

that the Secretary shall prescribe such regulations as may be necessary

or appropriate to carry out the purposes of section 263A, including

regulations to prevent the use of related parties, pass-thru entities,

or intermediaries to avoid the application of section 263A and the

regulations thereunder. One way in which the application of section

263A and the regulations thereunder would be otherwise avoided is

through the use of entities described in the preceding sentence in such

a manner as to effectively avoid the necessity to restate beginning

inventory balances under the change in method of accounting required or

permitted under section 263A and the regulations thereunder.

(ii) Deemed avoidance of this section--(A) Scope. For purposes of

this paragraph (c), the avoidance of the application of section 263A

and the regulations thereunder will be deemed to occur if a taxpayer

using the LIFO method of accounting for inventories, transfers

inventory property to a related corporation in a transaction described

in section 351, and such transfer occurs:

(1) On or before the beginning of the transferor's taxable year

beginning in 1987; and

(2) After September 18, 1986.

(B) General rule. Any transaction described in paragraph

(c)(4)(ii)(A) of this section will be treated in the following manner:

(1) Notwithstanding any provision to the contrary (for example,

section 381), the transferee corporation is required to revalue the

inventories acquired from the transferor under the provisions of this

paragraph (c) relating to the change in method of accounting and the

adjustment required by section 481(a), as if the inventories had never

been transferred and were still in the hands of the transferor; and

(2) Absent an election as described in paragraph (c)(4)(iii) of

this section, the transferee must account for the inventories acquired

from the transferor by treating such inventories as if they were

contained in the transferee's LIFO layer(s).

(iii) Election to use transferor's LIFO layers. If a transferee

described in paragraph (c)(4)(ii) of this section so elects, the

transferee may account for the inventories acquired from the transferor

by allocating such inventories to LIFO layers corresponding to the

layers to which such properties were properly allocated by the

transferor, prior to their transfer. The transferee must account for

such inventories for all subsequent periods with reference to such

layers to which the LIFO costs were allocated. Any such election is to

be made on a statement attached to the timely filed federal income tax

return of the transferee for the first taxable year for which section

263A and the regulations thereunder applies to the transferee.

(iv) Tax avoidance intent not required. The provisions of paragraph

(c)(4)(ii) of this section will apply to any transaction described

therein, without regard to whether such transaction was consummated

with an intention to avoid federal income taxes.

(v) Related corporation. For purposes of this paragraph (c)(4), a

taxpayer is related to a corporation if--

(A) the relationship between such persons is described in section

267(b)(1), or

(B) such persons are engaged in trades or businesses under common

control (within the meaning of paragraphs (a) and (b) of section 52).

(d) Non-inventory property--(1) Need for adjustments. A taxpayer

that changes its method of accounting for costs subject to section 263A

with respect to non-inventory property must revalue the non-inventory

property on hand at the beginning of the year of change as set forth in

paragraph (d)(2) of this section, and compute an adjustment under

section 481(a). The adjustment under section 481(a) will equal the

difference between the adjusted basis of the property as revalued using

the taxpayer's new method and the adjusted basis of the property as

originally valued using the taxpayer's former method.

(2) Revaluing property. A taxpayer must revalue its non-inventory

property as of the beginning of the year of change in method of

accounting. The facts and circumstances revaluation method of paragraph

(c)(2)(iii) of this section must be used to revalue this property. In

revaluing non-inventory property, however, the only additional section

263A costs that must be taken into account are those additional section

263A costs incurred after the later of December 31, 1986, or the date

the taxpayer first becomes subject to section 263A, in taxable years

ending after that date. See Sec. 1.263A-1(d)(3) for the definition of

additional section 263A costs.

Sec. 1.263A-7T [Removed]

Par. 5. Section 1.263A-7T is removed.

Sec. 1.263A-15 [Amended]

Par. 6. Section 1.263A-15 is amended by removing ``1.263A-7T (e)

generally'' from the last sentence in paragraph (a)(1) and replacing it

with ``1.263A-7''.

Dated: July 28, 1997.

Michael P. Dolan,

Acting Commissioner of Internal Revenue.

Donald C. Lubick,

Acting Assistant Secretary of the Treasury.

[FR Doc. 97-20530 Filed 8-4-97; 8:45 am]

BILLING CODE 4830-01-U

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.