Approval and Promulgation of Implementation Plans; Illinois
Federal RegisterMar 21, 1995
Ask Donna
What actually matters in this document.
Text
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 52
[IL79-1-6616A; FRL--5167-4]
Approval and Promulgation of Implementation Plans; Illinois
AGENCY: Environmental Protection Agency.
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: The United States Environmental Protection Agency (USEPA)
approves requested revisions to Chicago ozone Federal Implementation
Plan (FIP) as it pertains to the following sources: General Motors
Corporation, Electro-Motive Division Plant (GMC Electro-Motive),
LaGrange, Illinois; Minnesota Mining and Manufacturing Corporation
(3M), Bedford Park, Illinois; Replogle Globes, Inc. (Replogle);
Broadview, Illinois; Candle Corporation of America (CCA), Chicago,
Illinois; Nalco Chemical Company (Nalco) Bedford Park, Illinois
Clearing Plant; Parisian Novelty Company (Parisian), Chicago, Illinois;
Meyercord Corporation (Meyercord), Carol Stream, Illinois; Wallace
Computer Services, Inc. (Wallace) Printing and Binding Plant, Hillside,
Illinois; and the General Packaging Products, Inc. (GPP) Chicago,
Illinois. This action lists the FIP revisions USEPA is approving and
incorporates the relevant material into the Code of Federal
Regulations. The rationale for the approval is set forth in this final
rule; additional information is available at the address indicated
below. Elsewhere in this Federal Register, USEPA is proposing approval,
soliciting public comment, and offering an opportunity for a public
hearing on these requested FIP revisions. If adverse comments are
received or a public hearing is requested on this direct final rule,
USEPA will withdraw this final rule and address the comments received
in response to this final rule in the final rule on the proposed rule
published in the proposed rules section of this Federal Register.
Unless this final rule is withdrawn, no further rulemaking will occur
on this requested FIP revision.
EFFECTIVE DATE: This action will be effective May 22, 1995 unless
notice is received by April 20, 1995 that someone wishes to submit
adverse comments. If the effective date is delayed, timely notice will
be published in the Federal Register.
ADDRESSES: Written comments can be mailed to: J. Elmer Bortzer, Chief,
Regulation Development Section (AR-18J), Regulation Development Branch,
Air and Radiation Division, U.S. Environmental Protection Agency, 77
West Jackson Boulevard, Chicago, Illinois 60604.
Docket: Pursuant to sections 307(d)(1) (B) and (N) of the Clean Air
Act (Act), 42 U.S.C. 7607(d)(1) (B) and (N), this action is subject to
the procedural requirements of section 307(d). Therefore, USEPA has
established a public docket for this action, A-94-39, which is
available for public inspection and copying between 8 a.m. and 4 p.m.,
Monday through Friday, at the following addresses. We recommend that
you contact Fayette Bright before visiting the Chicago location and
Rachel Romine before visiting the Washington, D.C. location. A
reasonable fee may be charged for copying.
The United States Environmental Protection Agency, Region 5,
Regulation Development Branch, Eighteenth Floor, Southeast, 77 West
Jackson Boulevard, Chicago, Illinois, 60604, (312) 886-6069.
United States Environmental Protection Agency, Docket No. A-94-39,
Air Docket (LE-131), Room M1500, Waterside Mall, 401 M Street, S.W.,
Washington, D.C. 20460, (202) 245-3639.
FOR FURTHER INFORMATION CONTACT:
Steven Rosenthal, Environmental Engineer (312) 886-6052.
SUPPLEMENTARY INFORMATION: On June 29, 1990, USEPA promulgated a FIP
requiring Reasonably Available Control Technology (RACT) to control the
emission of Volatile Organic Compounds (VOCs) in six counties in the
Chicago metropolitan area. 55 FR 26818, codified at 40 CFR 52.741. In
determining the applicability of some of these regulations to
particular sources, USEPA used the concept of ``maximum theoretical
emissions'' (MTE), which is defined as ``the quantity of volatile
organic material emissions that theoretically could be emitted by a
stationary source before add-on controls based on the design capacity
or maximum production capacity of the source and 8760 hours per year *
* * at ``55 FR 26860, 40 CFR 52.741(a). Relief for otherwise subject
sources is available through a site-specific State Implementation Plan
(SIP) or FIP revision that limits emissions to below the applicable
cutoff by operational or production limitations.
The sources identified in Table 1 have requested that USEPA approve
production or operational limitations that will keep their emissions
below the applicability cutoff of the rule to which they would
otherwise be subject. Production limits are restrictions on the amount
of final product which can be manufactured or otherwise produced at a
source. Operational limits are all other restrictions on the manner in
which a source is run, including hours of operation and amount and type
of raw material consumed. Production and operational limits must be
stated as conditions that can be enforced independently of one another.
FIP revisions which limit VOC emissions to less than 100 tons VOC
per year have been requested by the following nine companies.
[[Page 14900]]
Table 1.--Requests for Federally Enforceable Operating Restrictions
----------------------------------------------------------------------------------------------------------------
Date of
State Pollutant Subject matter Source submission
----------------------------------------------------------------------------------------------------------------
Illinois............. VOM............. Chicago Ozone FIP........... GMC Electro-Motive.......... \1\NA
Illinois............. VOM............. Chicago Ozone FIP........... 3M.......................... 08/29/91
Illinois............. VOM............. Chicago Ozone FIP........... Replogle.................... 10/17/91
Illinois............. VOM............. Chicago Ozone FIP........... CCA......................... 09/05/91
Illinois............. VOC............. Chicago Ozone FIP........... Nalco....................... 02/23/93
Illinois............. VOM............. Chicago Ozone FIP........... Parisian.................... 04/09/92
Illinois............. VOM............. Chicago Ozone FIP........... Meyercord................... 08/12/94
Illinois............. VOM............. Chicago Ozone FIP........... Wallace..................... 09/24/92
Illinois............. VOM............. Chicago Ozone FIP........... General Packaging........... 10/02/92
----------------------------------------------------------------------------------------------------------------
\1\The General Motors revision is based on materials submitted to USEPA on February 28, 1991 and May 10, 1991,
in connection with resolution of General Motors Corp. v. USEPA, No. 90-2889 (7th Cir.).
USEPA has determined that these FIP revision requests comply with
all applicable requirements of the Act and USEPA policy and regulations
concerning such revisions. The USEPA, therefore, grants these requests.
Because USEPA considers this action noncontroversial and routine,
we are approving it without prior proposal. The action will become
effective on May 22, 1995. However, if we receive adverse comments or a
request for a public hearing by April 20, 1995, then USEPA will publish
a notice that withdraws this action. If no request for a public hearing
has been received, USEPA will address the public comments received in
the final rule on the requested SIP revision which has been proposed
for approval in the proposed rules section of this Federal Register. If
a public hearing is requested, USEPA will publish a proposed rule
announcing a public hearing and reopening the public comment period
until 30 days after the public hearing. At the conclusion of this
additional public comment period, USEPA will publish a final rule
responding to the public comments received and announcing final action.
The Office of Management and Budget has exempted this regulatory
action from Executive Order 12866 review.
Under the Regulatory Flexibility Act, 5 U.S.C. 600 et seq., USEPA
must prepare a regulatory flexibility analysis assessing the impact of
any proposed or final rule on small entities. 5 U.S.C. 603 and 604.
Alternatively, USEPA may certify that the rule will not have a
significant economic impact on a substantial number of small entities.
Small entities include small businesses, small not-for-profit
enterprises, and government entities with jurisdiction over populations
of less than 50,000.
Under Section 307(b)(1) of the Clean Air Act, petitions for
judicial review of this action must be filed in the United States Court
of Appeals for the appropriate circuit by May 22, 1995. Filing a
petition for reconsideration by the Administrator of this final rule
does not affect the finality of this rule for the purposes of judicial
review nor does it extend the time within which a petition for judicial
review may be filed, and shall not postpone the effectiveness of such
rule or action. This action may not be challenged later in proceedings
to enforce its requirements. (See section 307(b)(2).)
List of Subjects in 40 CFR Part 52
Environmental protection, Air pollution control, Intergovernmental
relations, Volatile organic compound, Volatile organic material.
Dated: February 28, 1995.
Carol M. Browner,
Administrator.
Part 52, chapter I, title 40 of the Code of Federal Regulations is
amended as follows:
PART 52--[AMENDED]
1. The authority citation for part 52 continues to read as follows:
Authority: 42 U.S.C. 7401-7671q.
Subpart O--Illinois
2. Section 52.741 is amended by adding paragraphs (e)(8), (h)(6),
(u)(6), (u)(7), (v)(6), (x)(6), (x)(8), (x)(9), (x)(10), (x)(11),
(x)(12) and (x)(13) read as follows:
Sec. 52.741 Control strategy: Ozone control measures for Cook, Du
Page, Kane, Lake, McHenry and Will Counties.
* * * * *
(e) * * *
(8) The control requirements in this paragraph apply to the wood
coating line, which coats wooden globe stand components, at Replogle
Globes, Inc. (Replogle) Broadview facility in Cook County, Illinois,
instead of the control requirements in paragraphs (e)(1) and (e)(2) of
this section. Compliance with this paragraph must be demonstrated
through the applicable coating analysis test methods and procedures
specified in paragraph (a)(4)(i) of this section.
(i) After October 6, 1991, no coatings shall at any time be applied
which exceed the following emission limitations for the specified
coating.
(A) 6.59 pounds (lbs) Volatile Organic Material (VOM) per gallon of
stain (minus water and any compounds which are specifically exempted
from the definition of VOM) as applied to coat wooden globe stand
components. Such stain consists of #9250 Walnut NGR Stain (RGI
#W06000100), #9974 Cherry NGR Stain (RGI #W06003500) and #9943 Ash NGR
Stain (RGI #W06003600). The Administrator must be notified at least ten
(10) days prior to the use of any replacement stains.
(B) 5.53 lbs VOM per gallon of Sanding Sealer (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied to coat wooden globe stand components. Such sealer consists
of #15304 High Build Sanding Sealer (RGI #W06003700). The Administrator
must be notified at least ten (10) days prior to the use of any
replacement sanding sealer.
(C) 5.20 lbs VOM per gallon of lacquer (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied to coat wooden globe stand components. Such lacquer consists
of #15352 High Build Lacquer (RGI #W06003300). The Administrator shall
be notified at least ten (10) days prior to the use of any replacement
lacquer.
(ii) After October 6, 1991, the volume of coatings used shall not
exceed the following:
(A) 5,000 gallons per year total for all coatings specified in
paragraph (e)(8)(i)(A) of this section. The yearly volume of coatings
used are to be calculated as follows:
(1) Compute the volume of specified coating used each month by the
15th of the following month. [[Page 14901]]
(2) By the 15th of each month, add the monthly coating use for the
12 previous months (to obtain the yearly volume of coatings used).
(B) 4,000 gallons per year total for all coatings specified in
paragraph (e)(8)(i)(B) of this section. The yearly volume of the
coatings used are to be calculated as specified in paragraphs
(e)(8)(ii)(A)(1) and (e)(8)(ii)(A)(2) of this section.
(C) 5,000 gallons per year total for all coatings specified in
paragraph (e)(8)(i)(C) of this section. The yearly volume of coatings
used are to be calculated as specified in paragraphs (e)(8)(ii)(A)(1)
and (e)(8)(ii)(A)(2) of this section.
(iii) Beginning on October 6, 1991, the owner and operator of the
Replogle Globes, Inc. plant in Broadview, Illinois shall keep the
following records for each month. All records shall be retained at
Replogle Globes, Inc. for three (3) years and shall be made available
to the Administrator on request.
(A) the name and identification number of each coating as applied
on any wood coating line.
(B) The weight of VOM per volume (determined in accordance with the
procedures in paragraph (a)(4)(i) of this section) and the volume of
each coating (minus water and any compounds which are specifically
exempted from the definition of VOM) as applied each month on any wood
coating line.
* * * * *
(h) * * *
(6) The control and recordkeeping and reporting requirements, as
well as the test methods in this paragraph, apply to the rotogravure
and flexographic presses at General Packaging Products, Inc.'s (GPP)
plant in Chicago, Illinois, instead of the requirements in 40 CFR
52.741(h)(1) through 40 CFR 52.741(h)(5).
(i) After July 1, 1992, no inks or other volatile organic material
(VOM) containing materials shall at any time be applied or used which
have a higher percent VOM by weight than the following:
(A) 8 percent VOM by weight for waterbased inks as applied on GPP's
presses.
(B) 82 percent VOM by weight for solvent based inks as applied on
GPP's presses.
(C) 100 percent VOM by weight for all other VOM containing
materials (besides inks) as used on GPP's presses.
(ii) After July 1, 1992, the weight of ink and other VOM containing
materials used shall not exceed the following:
(A) 200,000 pounds per year total for all waterbased inks, as
applied (including dilution material). The yearly weight of waterbased
inks used is to be calculated according to the procedure in paragraph
(h)(6)(iii) of this section.
(B) 100,008 pounds per year total for all solvent based inks, as
applied (including dilution material). The yearly weight of solvent
based inks used is to be calculated according to the procedure in
paragraph (h)(6)(iii) of this section.
(C) 100,000 pounds per year total (based upon the formulation of
the material as it is used on the presses) for all other VOM containing
materials (besides inks). The yearly weight of other VOM containing
materials is to be calculated according to the procedure in paragraph
(h)(6)(iii) of this section.
(iii) The yearly weight of ink/material used is to be calculated as
follows:
(A) Compute the weight of ink/material used each month by the 15th
of the following month.
(B) By the 15th of each month, add the monthly ink/material usage
for the 12 previous months (to obtain the yearly weight of ink/material
used).
(iv) Beginning on July 1, 1992, the owner and operator of GPP's
plant in Chicago, Illinois, shall keep the following records for each
month. All records shall be retained at GPP for 3 years and shall be
made available to the Administrator on request:
(A) The name and identification number of each waterbased ink, each
solvent based ink, and each other VOM containing material as applied or
used on any press.
(B) The pounds of waterbased ink as applied on all presses for each
month and the percent VOM by weight for each waterbased ink as applied
on any press for each month.
(C) The pounds of solvent based ink as applied on all presses for
each month and the percent VOM by weight for each solvent based ink as
applied on any press for each month.
(D) The pounds of other (non-ink) VOM containing material used on
all presses for each month and the percent VOM by weight for each (non-
ink) VOM containing material as used on any press for each month.
(v) Any record showing a violation of paragraph (h)(6)(i) or
(h)(6)(ii) of this section shall be reported by sending a copy of such
record to the Administrator within 30 days of the violation.
(vi) To determine compliance with paragraphs (h)(6)(i) and
(h)(6)(ii) of this section and to establish the records required under
paragraph (h)(6)(iv) of this section the percent VOM by weight of each
ink and other VOM containing material shall be determined by the
applicable test methods and procedures specified in paragraph (a)(4) of
this section.
* * * * *
(u) * * *
(6) The control requirements in this paragraph apply to the
adhesive globe coating operations at Replogle's Broadview facility in
Cook County, Illinois, instead of the control requirements in paragraph
(u)(3) of this section.
(i) After October 6, 1991, no coatings shall at any time be applied
which exceed the following emission limitations for the specified
coating.
(A) 7.0 lbs VOM per gallon of adhesive coating (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied to coat globes. Such coating consists of #7879446 Methylene
Chloride (RGI #01004100). The Administrator shall be notified at least
ten (10) days prior to the use of any replacement adhesive for coating
globes.
(B) [Reserved]
(ii) After October 6, 1991, the volume of coatings used shall not
exceed the following:
(A) 572 gallons per year total for all coatings specified in
paragraph (u)(6)(i)(A) of this section. The yearly volume of coatings
used are to be calculated as follows:
(1) Compute the volume of specified coating used each month by the
15th of the following month.
(2) By the 15th of each month, add the monthly coating use for the
12 previous months (to obtain the yearly volume of coatings used).
(B) [Reserved]
(iii) Beginning on October 6, 1991, the owner and operator of the
Replogle Globes, Inc. plant in Broadview, Illinois shall keep the
following records for each month. All records shall be retained at
Replogle Globes, Inc. for three (3) years and shall be made available
to the Administrator on request:
(A) The name and identification number of each coating as applied
on any adhesive globe coating line.
(B) The weight of VOM per volume and the volume of each coating
(minus water and any compounds which are specifically exempted from the
definition of VOM) as applied each month on any adhesive globe coating
line.
(7) The control requirements in this paragraph apply to the glass
candle container coating line(s) and silk screening machines at the
Candle Corporation of America (CCA), Chicago, Illinois facility,
instead of the control requirements in paragraph (u)(3) of this
section. [[Page 14902]]
(i) After June 1, 1992, no coatings or inks shall at any time be
applied, at any coating or ink applicator, which exceed the following
emission limitations for the specified coating or ink.
(A) 6.04 pounds (lbs) volatile organic material (VOM) per gallon of
clear lacquer/varnish (minus water and any compounds which are
specifically exempted from the definition of VOM) as applied to coat
glass candle containers. Such clear lacquer/varnish (multi-color) is
identified as LP3500. The Administrator must be notified at least 10
days prior to the use of any replacement clear lacquers/varnishes.
(B) 5.23 lbs VOM per gallon of translucent coating (minus water and
any compounds which are specifically exempted from the definition of
VOM) as applied to coat glass candle containers. Such translucent
coating (multi-color) is identified as LP3603. The Administrator must
be notified at least 10 days prior to the use of any replacement
translucent coatings.
(C) 5.84 lbs VOM per gallon of white lacquer (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied to coat glass candle containers. Such white lacquer is
identified as LP3507. The Administrator must be notified at least 10
days prior to the use of any replacement white lacquers.
(D) 3.40 lbs VOM per gallon of fast dry enamel silk screen printing
ink (minus water and any compounds which are specifically exempted from
the definition of VOM) as applied to print onto glass candle
containers.
(ii) After June 1, 1992, the volume of coating and ink used shall
not exceed the following:
(A) 2,164 gallons per month total for all coatings specified in
paragraph (u)(7)(i)(A) of this section.
(B) 369 gallons per month total for all coatings specified in
paragraph (u)(7)(i)(B) of this section.
(C) 49 gallons per month total for all coatings specified in
paragraph (u)(7)(i)(C) of this section.
(D) 50 gallons per month total for all inks specified in paragraph
(u)(7)(i)(D) of this Section.
(iii) Beginning on June 1, 1992, the owner and operator of CCA's
plant in Chicago, Illinois, shall keep the following records for each
month. All records shall be retained at CCA for 3 years and shall be
made available to the Administrator on request.
(A) The name and identification number of each coating and ink as
applied on any glass candle container coating line or silk screening
machine.
(B) The weight of VOM per volume and the volume of each coating and
ink (minus water and any compounds which are specifically exempted from
the definition of VOM) as applied each month on any glass candle
container coating line or silk screening machine.
(iv) After June 1, 1992, no more than 100 gallons per month of
cleaning solvent is allowed to be used on the glass candle container
coating line(s) at CCA. The only cleaning solvents allowed for use are
acetone (identified as LP3525) and methyl ethyl ketone (identified as
LP3520). Beginning on June 1, 1992, CCA shall keep monthly records of
the type and volume of all cleaning solvents used. All such records
shall be retained at CCA for 3 years and shall be made available to the
Administrator on request.
(v) After June 1, 1992, no more than 50 gallons per month of
cleaning solvent is allowed to be used on the glass candle container
silk screening machines at CCA. The only cleaning solvent allowed for
use is petroleum naphtha (identified as light aromatic naphtha with
7.28 lbs VOM per gallon, minus water and any compounds which are
specifically exempted from the definition of VOM). Beginning on June 1,
1992, CCA shall keep monthly records of the type and volume and the
weight of VOM per volume (minus water and any compounds which are
specifically exempted from the definition of VOM) of all cleaning
solvents used on the glass candle container silk screening machines.
All such records shall be retained at CCA for 3 years and shall be made
available to the Administrator on request.
* * * * *
(v) * * *
(6) The control requirements in this paragraph apply to the 7
blenders and 3 moguls of the adhesive coating solution formulation
(compounding) operations at the Minnesota Mining and Manufacturing
Corporation's (3M) Bedford Park facility in Cook County, Illinois,
instead of the control requirements in paragraph (v)(3) of this
section.
(i) After September 1, 1991, the following operating restrictions
shall apply to 3M's Bedford Park, Illinois, compounding operations.
(A) The combined operating hours for all blenders shall not exceed
8,400 hours per quarter (rolled on a monthly basis). The combined
quarterly operating hours of all blenders are to be calculated as
follows:
(1) By the 15th of each month, compute the combined monthly
operating hours of all blenders during the previous month.
(2) By the 15th of each month, add the monthly operating hours of
all blenders for the 3 previous months (to obtain the combined
quarterly operating hours of all blenders).
(B) The combined operating hours for all moguls shall not exceed
4,200 hours per quarter (rolled on a monthly basis). The quarterly
operating hours of all moguls are to be calculated as follows:
(1) By the 15th of each month, compute the combined monthly
operating hours of all moguls during the previous month.
(2) By the 15th of each month, add the monthly operating hours of
all moguls for the 3 previous months (to obtain the combined quarterly
operating hours of all moguls).
(ii) Beginning on September 1, 1991, the owner and operator of the
3M Bedford Park Plant in Bedford Park, Illinois, shall keep the
following records. These records shall be compiled on a monthly basis,
be retained at the 3M facility for a period of 3 years, and be made
available to the Administrator upon request.
(A) Separate monthly records for each of the 7 blenders identifying
each batch and the length of each batch as well as the total monthly
hours of operation for all blenders.
(B) Separate monthly records for each of the 3 moguls identifying
each batch and the length of each batch as well as the total monthly
hours of operation for all moguls.
* * * * *
(x) * * *
(6) The control requirements in this paragraph apply to the varnish
operations at the General Motors Corporation, Electro-Motive Division
Plant (GMC Electro-Motive), LaGrange, Illinois, instead of the control
requirements in paragraph (x)(3) of this section.
(i) After July 1, 1991, no coatings shall at any time be applied
which exceed the following emission limitations for the specified
coating.
(A) 8.0 lbs VOM per gallon of coating (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied at each coating applicator to coat Nomex rings. Such coating
consists of Monsanto Skybond 705 Polyamide Resin (EMD P/N 9088817) and
diluents. The Administrator must be notified at least 10 days prior to
the use of any replacement coating(s) and/or diluents for coating Nomex
rings.
(B) 6.8 lbs VOM per gallon of coating (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied at [[Page 14903]] each coating applicator for any coatings
not specified in paragraph (x)(6)(i)(A) of this section.
(ii) After July 1, 1991, the volume of coatings used shall not
exceed the following:
(A) 600 gallons per year total for all coatings specified in
paragraph (x)(6)(i)(A) of this section. The yearly volume of coatings
used are to be calculated as follows:
(1) Compute the volume of specified coating used each month by the
15th of the following month.
(2) By the 15th of each month, add the monthly coating use for the
12 previous months (to obtain the yearly volume of coatings used).
(B) 28,500 gallons per year total for all coatings other than those
specified in paragraph (x)(6)(i)(A) of this section. The yearly volume
of coatings used are to be calculated as specified in paragraphs
(x)(6)(ii)(A)(1) and (x)(6)(ii)(A)(2) of this section.
(iii) Beginning on July 1, 1991, the owner and operator of the
General Motors Corporation Electro-Motive Division Plant in LaGrange,
Illinois shall keep the following records for each month. All records
shall be retained at General Motors for 3 years and shall be made
available to the Administrator on request.
(A) The name and identification number of each coating as applied
on any coating line within the varnish operation.
(B) The weight of VOM per volume and the volume of each coating
(minus water and any compounds which are specifically exempted from the
definition of VOM) as applied each month on any coating line within the
varnish operation.
* * * * *
(8) The control and recordkeeping requirements in this paragraph
apply to the silk screen presses and associated ovens, cleaning
operations and laminators at Parisian's Novelty Company (Parisian),
Chicago, Illinois, facility, instead of the control requirements in
paragraphs (x)(8) (u)(3) and (x)(3) of this section and the
recordkeeping requirements in paragraph (x)(8)(y) of this section.
(i) After March 1, 1993, no coatings or inks shall at any time be
applied, at any coating or ink applicator, which exceed the following
emission limitations for the specified coating or ink.
(A) 6.65 pounds (lbs) volatile organic material (VOM) per gallon of
ink (minus water and any compounds which are specifically exempted from
the definition of VOM) as applied on Parisian's silk screen presses.
(B) 6.4 lbs VOM per gallon of adhesive coating (minus water and any
compounds which are specifically exempted from the definition of VOM)
as applied on Parisian's laminators. Such adhesive is identified as MIX
#963.
(ii) After March 1, 1993, the volume of coating and ink used shall
not exceed the following:
(A) 2,556 gallons per year total for all inks. The yearly volume of
inks used is to be calculated as follows:
(1) Compute the volume of ink used each month by the 15th of the
following month.
(2) By the 15th of each month, add the monthly ink usage for the 12
previous months (to obtain the yearly volume of ink used).
(B) 780 gallons per year total for all coatings specified in
paragraph (x)(8)(i)(B) of this section. The yearly volume of coatings
used are to be calculated as specified in paragraphs (x)(8)(ii)(A)(1)
and (x)(8)(ii)(A)(2) of this section.
(iii) Beginning on March 1, 1993, the owner and operator of
Parisian's plant in Chicago, Illinois, shall keep the following records
for each month. All records shall be retained at Parisian for 3 years
and shall be made available to the Administrator on request.
(A) The name and identification number of each coating as applied
on any laminator.
(B) The weight of VOM per volume and the volume of each coating
(minus water and any compounds which are specifically exempted from the
definition of VOM) as applied each month on any laminator.
(C) The weight of VOM per volume and the volume of each type of ink
(minus water and any compounds which are specifically exempted from the
definition of VOM) as applied each month on any screen press.
(iv) After March 1, 1993, no more than 84 gallons per year of
denatured alcohol may be used for cleaning labels at Parisian. The
yearly volume of denatured alcohol used is to be calculated as
specified in paragraphs (x)(8)(ii)(A)(1) and (x)(8)(ii)(A)(2) of this
section. Beginning on March 1, 1993, Parisian shall keep monthly
records of the type, volume, and VOM content of all solvents used for
label cleaning. These records shall be retained at Parisian for 3 years
and shall be made available to the Administrator on request.
(v) After March 1, 1993, no more than 7,932 gallons per year of
screen wash #956 may be used on Parisian's screen cleaner. The yearly
volume of screen wash #956 used is to be calculated as specified in
paragraphs (x)(8)(ii)(A)(1) and (x)(8)(ii)(A)(2) of this section.
Beginning on March 1, 1993, Parisian shall keep monthly records of the
type, volume, and VOM content of all cleaning compounds used on
Parisian's screen cleaner. These records shall be retained at Parisian
for 3 years and shall be made available to the Administrator on
request.
(vi) After March 1, 1993, only those cleaners specifically
identified in paragraphs (x)(8)(iv) and (x)(8)(v) of this section may
be used at Parisian.
(9) The control requirements in this paragraph apply to the process
sources listed in paragraph (x)(9)(i)(A) of this section at the Nalco
Chemical Company facility in Bedford Park, Illinois, instead of the
control requirements in paragraph (x)(3) of this section.
(i) Production and Operation Restrictions.
(A) On and after October 1, 1992, the maximum volatile organic
compound (VOC) emissions per batch, the 12-month rolling average number
of batches per year, and the peak limit of batches per month shall not
exceed the following limits:
--------------------------------------------------------------------------------------------------------------------------------------------------------
Maximum VOC
Source emissions, lb/batch 12-mo. rolling average limit batch/yr Peak batch limit, batch/month
--------------------------------------------------------------------------------------------------------------------------------------------------------
(1) System 1 0.16................ 280....................................................... 33.
charge.
System 1 purge 1.35................ .......................................................... ..................................................
(2) 24-T-156, 157. 2.60................ 300....................................................... 33.
(3) 28-T-217, 234. 0.23................ 402....................................................... 45.
(4) 28-T-214-216.. 5.70................ 603....................................................... 65.
(5) 20-R-182, 185. 0.02................ 72........................................................ 8.
(6) 20-R-130...... 0.07................ 340....................................................... 38.
(7) 20-R-155...... 0.21................ 254....................................................... 29.
[[Page 14904]]
(8) 20-WT-174..... 0.21................ 254....................................................... 29.
(9) 12-T-97-99.... 4.6E-4 lb/hr........ 8,760 hr/yr............................................... 744 hr/mo.
(10) 12-T-95...... 4.0E-6 lb/hr........ 8,760 hr/yr............................................... 744 hr/mo.
(11) 12-T-96...... 7.7E-5 lb/hr........ 8,760 hr/yr............................................... 744 hr/mo.
(12) 12-T-67, 73.. 0.003 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(13) 20-T-121-122. 0.85................ 312....................................................... 34.
(14) 20-T-123-125. 5.4................. 616....................................................... 68.
(15) 20-T-140, 142 8.0................. 600....................................................... 65.
(16) 20-T-159..... 0.31................ 416....................................................... 46.
(17) 20-R-193, 200 9.8................. 540....................................................... 59.
(18) 32-R-300..... 0.18................ 365....................................................... 41.
(19) 32-T-302..... 0.21................ 365....................................................... 41.
(20) 32-T-304..... 0.21................ 730....................................................... 81.
(21) 32-T-314..... 0.23................ 365....................................................... 41.
(22) 32-T-322..... 0.21................ 365....................................................... 41.
(23) 32-T-328..... 0.23................ 365....................................................... 41.
(24) 10-T-61...... 0.001............... 365--containing organic................................... 31--containing organic.
(25) 24-T-441, 166 0.12................ 730....................................................... 81.
(26) 25-T-284, 0.28................ 730....................................................... 81.
440, 443-444.
(27) 25-T-170..... 4E-6................ 104....................................................... 12.
(28) Tank truck 0.12 lb/truck....... 1,600 trucks/yr........................................... 134 trucks/mo.
loading.
(29) System 2..... 0.36................ 280....................................................... 33.
(30) System 4..... 2.88................ 280....................................................... 33.
(31) 25-R-164..... 0.10................ 365....................................................... 41.
(32) 25-R-205..... 0.14................ 365....................................................... 41.
(33) Drum station. 3.51................ 1,005..................................................... 110.
(34) V-4SAC....... 1.56................ 254....................................................... 29.
(35) 20-CT-155.... 13.90............... 254....................................................... 29.
(36) 12-SE-100.... 1.10 lb/hr.......... 8,760 hr/yr............................................... 744 hr/mo.
(37) Drum exhaust 1.00................ 365--involving use of organic material.................... 31--involving use of organic material.
hood A.
(38) 24-T-230..... 0.98................ 730....................................................... 81.
(39) 8-CT-1....... 0.002 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(40) 9-CT-1....... 0.002 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(41) 10-CT-1...... 0.005 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(42) 22-CT-1...... 0.003 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(43) 25-CT-1...... 0.005 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(44) 25-CT-2...... 0.002 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(45) 29-CT-1...... 0.002 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(46) 32-CT-1...... 0.005 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(47) 36-CT-1...... 0.002 lb/hr......... 8,760 hr/yr............................................... 744 hr/mo.
(48) 32-T-325..... 0a.................. 365....................................................... 41.
(49) 26-R-195..... 0.1a................ 365....................................................... 41.
(50) Continuous 0.1 lb/hra.......... 2,000 hr/yr............................................... ..................................................
polymer-blending.
(51) Portafeed 0.84 lb/hrb......... 4,160 hr/yr............................................... 744 hr/mo.
washer booth 1.
(52) Portafeed 0.84 lb/hrb......... 8,736 hr/yr............................................... 744 hr/mo.
washer booth 2.
(53) 32-T-392..... 4.4E-7.............. 104....................................................... 12.
--------------------------------------------------------------------------------------------------------------------------------------------------------
aAssumed value.
bBased on monitoring data.
(B) The following equation shall be used to calculate maximum VOC
emissions per batch for the process sources listed in paragraphs
(x)(9)(i)(A)(1) (charge only and (2) through (28) and (53) of this
section:
Where:
ER = VOC emission rate;
Qo = Quantity of organic per batch or charge rate;
[GRAPHIC][TIFF OMITTED]TR21MR95.000
Mv = Molecular weight of the volatile component;
P = Partial pressure of the volatile component for mixtures of liquid
made up with more than one chemical; or vapor pressure for pure liquids
made up of only one organic chemical; and
Constant1 = (7.45 gal/ft3)x(385 ft3/mole)x(760 mmHg).
(C) The following equation shall be used to calculate the VOC
emissions per batch from the process sources listed in paragraph
(x)(9)(i)(A)(1) of this section [[Page 14905]] (purge only) and (29)
through (32) of this section:
[GRAPHIC][TIFF OMITTED]TR21MR95.001
Where:
PR=Nitrogen purge rate; and
Constant2 = (385 ft3/mole)x(760 mmHg).
(D) The following equation shall be used to calculate the VOC emissions
per batch from the drum station listed at paragraph (x)(9)(i)(A)(33) of
this section:
ER(1b/batch) = (0.40 x [ER28-T-217-218])+(0.60 x [ER28-T-214-
216])
(E) The following equation shall be used to calculate the VOC
emissions per batch from the V-4SAC listed at paragraph
(x)(9)(i)(A)(34) of this section:
[GRAPHIC][TIFF OMITTED]TR21MR95.002
Where:
FR1mmHg = Maximum air flow rate to maintain 1 mmHg;
Ma = Molecular weight of air; and
Pv2 = Vapor pressure of organic at 65 deg.F and 760 mmHg.
(F) The following equation shall be used to calculate the VOC
emissions per batch from 20-CT-155 listed at paragraph (x)(9)(i)(A)(35)
of this section:
[GRAPHIC][TIFF OMITTED]TR21MR95.003
Where:
ERtot = Total system emission rate calculated using the following
equation:
[GRAPHIC][TIFF OMITTED]TR21MR95.004
Where:
Pv1 = Vapor pressure of organic at 200 deg.F and 350 mmHg.
(G) The following equation shall be used to calculate the VOC
emissions per hour from 12-SE-100 listed at paragraph (x)(9)(i)(A)(36)
of this section:
ER(lb/hr) = Evap (gm/cm2sec) x area (cm2) x 3600 sec/hr
Where:
Evap = Evaporation rate from a surface 8.93 cm x 8.9 cm (lb/
[cm2] [sec]) calculated using the following equation:
Evap = 10-7 Mv0.71 x [0.034 (Pe -
Pd)1.25 + 156 (Pe - Pd)]
Where:
Pe = Partial pressure of the component from the spilled liquid;
Pd = Partial pressure of the component in the incident air stream,
assumed to be 0 mmhg; and
Area = Surface area of the liquid.
(H) The following equation shall be used to calculate the VOC
emissions per batch from the drum exhaust hood A listed at paragraph
(x)(9)(i)(A)(37) of this section:
[GRAPHIC][TIFF OMITTED]TR21MR95.005
Where:
FR = Air flow rate.
(I) The following equation shall be used to calculate the VOC emissions
per batch from 24-T-230 listed at paragraph (x)(9)(i)(A)(38) of this
section:
[GRAPHIC][TIFF OMITTED]TR21MR95.006
[[Page 14906]]
Where:
VH = Head space volume at heated temperature 135 deg.F;
VA = Head space volume at ambient temperature 68 deg.F;
PP135 deg.F = Partial pressure of volatile component at 135 deg.F.
Constant3 = (434 ft3/mole)(7.45 gal/ft3)x(760 mmHg)
(J) The following equations shall be used to calculate the VOC
emissions per batch from the process sources listed in paragraph
(x)(9)(i) (39) through (47) of this section:
[GRAPHIC][TIFF OMITTED]TR21MR95.007
Where:
VR = Refill volume;
t = Time between refills;
org = Fraction of organic component in product;
CB = Concentration of chemical B fed 3 times/week;
VT = Tower volume;
dB = Density of chemical B;
CC = Concentration of chemical C fed continuously;
Evap = Evaporation rate; and
dc = Density of chemical C.
(K) The number of batches for each process source shall be
calculated as follows:
(1) Compute the monthly number of batches for each process source
by the 15th day of the following month.
(2) By the 15th day of each month, add the monthly number of
batches for each process source for the 12 previous months to obtain
the total number of batches per year.
(ii) Recordingkeeping.
(A) On and after October 1, 1992, the owner and operator of the
Nalco Chemical Company facility in Bedford Park, Illinois, shall keep
the following records for all process sources listed in paragraphs
(x)(9)(i)(A) (1) through (53) of this section. These records shall be
maintained for the units specified in paragraphs (x)(9)(i) (A) through
(K) of this section, be compiled on a monthly basis, be retained at the
facility for a period of 3 years, and be made available to the
Administrator upon request.
(B) [Reserved]
(1) Calculations of the pounds per batch or pounds per hour (as
appropriate) for each batch for each process source. This includes the
information necessary for each calculation.
(2) The monthly number of batches for each process source.
(3) The total number of batches per year for the 12 previous months
for each process source.
(10) The control requirements in this paragraph apply to the
storage tanks listed in paragraph (x)(10)(i)(A) of this section at the
Nalco Chemical Company facility in Bedford Park, Illinois, instead of
the control requirements in paragraph (x)(3) of this section.
(i) Production and Operation Restrictions.
(A) On and after October 1, 1992, the product of the molecular
weight of vapor in each storage tank (Mv), the true vapor pressure
at bulk liquid conditions for each tank (P), and the paint factor
(Fp); the storage tank maximum yearly throughput for each tank;
and the maximum monthly throughput for each tank shall not exceed the
following limits:
------------------------------------------------------------------------
MV x P x
Fp, (lb) Yearly Monthly
Tank No. (mmhg)/lb- throughput, throughput,
mole gal/yr gal/month
------------------------------------------------------------------------
(1) 24-T-147................. 45.4 56,250 4,688
(2) 24-T-150................. 227 266,450 22,204
(3) 24-T-151................. 227 266,450 22,204
(4) 24-T-158N................ 18.9 173,830 14,486
(5) 24-T-158C................ 18.0 110,190 9,183
(6) 24-T-158S................ 1.17 52,010 4,334
(7) 24-T-160................. 226.8 266,450 22,204
(8) 24-T-161................. 227 182,450 15,204
(9) 24-T-162................. 473 93,900 7,825
(10) 20-T-101................ 3.72 90,290 7,525
(11) 20-T-102................ 1.80 122,900 10,242
(12) 20-T-103................ 420 23,960 1,997
(13) 20-T-104................ 180 475,900 39,659
(14) 20-T-105................ 370 52,360 4,363
(15) 20-T-106................ 1,210 623,100 51,926
(16) 20-T-107................ 294 90,040 7,503
(17) 20-T-108................ 1,360 81,470 6,789
(18) 20-T-109................ 1,390 167,060 13,922
(19) 20-T-153................ 180 35,000 2,917
(20) 20-T-131a............... ............ .............. ...........
(21) 20-T-132a............... ............ .............. ...........
(22) 20-T-133a............... ............ .............. ...........
(23) 20-T-134a............... ............ .............. ...........
(24) 20-T-135a............... ............ .............. ...........
(25) 20-T-136................ 29.5 307,710 26,580
(26) 20-T-137a...............
[[Page 14907]]
(27) 20-T-138................ 29.5 307,710 26,580
(28) 32-T-305................ 288 785,550 65,462
(29) 32-T-306................ 66.5 165,350 13,779
(30) 32-T-307................ 66.5 294,750 24,563
(31) 32-T-308................ 66.5 128,470 10,706
(32) 32-T-310................ 66.5 77,290 6,441
(33) 32-T-311................ 66.5 182,130 15,177
(34) 32-T-319................ 50.0 688,950 57,413
(35) 32-T-320................ 50.0 688,950 57,413
(36) 32-T-326................ 70.0 248,440 20,703
(37) 32-T-331................ 70.0 489,540 40,795
(38) 32-T-332................ 70.0 70,380 5,865
(39) 32-T-333................ 70.0 270,850 22,571
(40) 32-T-334................ 70.0 210,610 18,267
(41) 32-T-335................ 70.0 418,200 34,850
(42) 32-T-336................ 70.0 632,460 52,706
(43) 32-T-337................ 798 53,850 4,488
(44) 17-T-206................ 27,000 300,760 25,063
(45) 17-T-208................ 27,000 300,760 25,063
(46) 17-T-207................ 2.48 180,180 15,016
(47) 17-T-209................ 2.48 180,180 15,016
(48) 24-T-515................ 331 216,860 18,072
(49) 25-T-282................ 1.42 1,920,410 160,034
(50) 25-T-283................ 1.42 1,920,410 160,034
(51) 24-T-442................ 18.0 90,990 7,583
(52) 17-T-210................ 47.9 582,990 48,583
(53) 17-T-211................ 47.9 582,990 48,583
(54) 17-T-212................ 508 728,420 60,702
(55) 17-T-213................ 508 728,420 60,702
(56) 17-T-401................ 50.0 131,970 10,998
(57) 17-T-402................ 15.0 120,160 10,014
(58) 17-T-403................ 6.20 127,770 10,648
(59) 17-T-404................ 26.5 1,601,510 133,460
(60) 17-T-405................ 50.0 113,830 9,486
(61) 17-T-406................ 40.0 231,030 19,253
(62) 17-T-407................ 206 135,180 11,265
(63) 17-T-409................ 395 327,410 27,285
(64) 17-T-410................ 395 129,290 10,774
(65) 17-T-411................ 50.0 213,870 17,843
(66) 17-T-412................ 50.0 277,840 23,153
(67) 17-T-414................ 50.0 72,920 6,077
(68) 17-T-415................ 50.0 56,140 4,678
(69) 17-T-416................ 395 393,550 32,796
(70) 17-T-417................ 23.4 233,780 19,482
(71) 17-T-418................ 115 873,270 72,773
(72) 17-T-419................ 119 278,460 23,205
(73) 17-T-420................ 112 730,780 60,898
(74) 17-T-421................ 25.2 300,010 25,001
(75) 17-T-422................ 115 873,270 72,773
(76) 17-T-423................ 23.4 215,060 17,922
(77) 17-T-424................ 23.4 209,610 17,468
(78) 26-T-218................ 50.0 64,890 5,408
(79) 26-T-219................ 1.50 197,900 16,492
(80) 26-T-220................ 2,460 160,020 13,336
(81) 26-T-221................ 50.0 74,820 6,235
(82) 26-T-222................ 80.0 66,590 5,550
(83) 26-T-224................ 4.80 225,290 18,774
(84) 26-T-225................ 50.0 36,610 3,051
(85) 26-T-226................ 294 47,390 3,949
(86) 26-T-227................ 50.0 63,040 5,253
(87) 26-T-228................ 500 136,150 11,346
(88) 26-T-229................ 50.0 112,970 9,414
(89) 26-T-231................ 23.4 319,610 26,634
(90) 26-T-232................ 117 564,280 47,024
(91) 26-T-233................ 23.4 539,700 44,975
(92) 27-T-245................ 21.6 361,970 30,165
(93) 27-T-246................ 348 141,820 11,818
(94) 27-T-247................ 23.4 71,670 5,972
(95) 27-T-248................ 198 96,010 8,001
(96) 27-T-249................ 927 51,240 4,270
(97) 27-T-250................ 110 433,030 36,086
(98) 27-T-251................ 396 45,440 3,787
[[Page 14908]]
(99) 27-T-252................ 21.6 171,370 14,281
(100) 27-T-253............... 348 237,900 19,825
(101) 26-T-192............... 10.0 117,950 9,829
(102) 27-T-278............... 0.62 74,910 6,243
(103) 27-T-279............... 0.18 583,760 48,647
(104) 27-T-285............... 21.6 459,530 38,294
(105) 27-T-286............... 21.6 459,530 38,294
(106) 25-T-201............... 19.8 143,550 11,963
(107) 32-T-388............... 0.07 499,340 41,612
(108) 32-T-389............... 0.07 499,340 41,612
(109) 32-T-390............... 288 808,310 583,340
(110) 32-T-391............... 1.42 800,00 583,340
------------------------------------------------------------------------
aTank not in use.
(B) The throughput shall be calculated as follows:
(1) Compute the monthly throughput for each tank by the 15th day of
the following month.
(2) By the 15th day of each month, add the monthly throughputs for
the 12 previous months to obtain the yearly throughput.
(ii) Recordkeeping. (A) On and after October 1, 1992, the owner and
operator of the Nalco Chemical Company facility in Bedford Park,
Illinois, shall keep the following records for all storage tanks. These
records shall be compiled on a monthly basis, be retained at the
facility for a period of 3 years, and be made available to the
Administrator upon request.
(1) The molecular weight of vapor in each storage tank (Mv),
the true vapor pressure at bulk liquid conditions for each tank (P),
the paint factor (Fp), and their product. Fp shall be
determined from Table 4.3-1 of ``Compilation of Air Pollutant Emission
Factors, Volume I: Stationary Point and Area Sources,'' AP-42,
September 1985.
(2) The monthly throughput.
(3) The total throughput per year for the 12 previous months.
(B) [Reserved].
(iii) Test Methods. (A) The true vapor pressure at bulk liquid
temperature shall be determined by using the procedures specified in
paragraph (a)(8) of this section.
(B) The molecular weight of vapor in the storage tank shall be
determined by using Table 4.3-2 ``Compilation of Air Pollutant Emission
Factors, Volume I: Stationary Point and Area Sources,'' AP-42,
September 1985, or by analysis of vapor samples. Where mixtures of
organic liquids are stored in a tank, Mv shall be estimated from
the liquid composition using the following equation:
[GRAPHIC][TIFF OMITTED]TR21MR95.008
Where:
Ma=Molecular weight of pure component a;
Pa=Vapor pressure of pure component a;
Xa=Mole fraction of pure component a in the liquid;
Mb=Molecular weight of pure component b;
Pb=Vapor pressure of pure component b;
Xb=Mole fraction of pure component b in the liquid; and
Pt=PaX2+PbXb.
(11) The control requirements in this paragraph apply to the
fugitive emission sources listed in paragraph (x)(11)(i)(A) of this
section at the Nalco Chemical Company facility in Bedfore Park,
Illinois, instead of the control requirements in paragraph (x)(3) of
this section.
(i) Production and Operation Restrictions.
(A) On and after October 1, 1992, all components (e.g., pumps,
valves, flanges, pressure relief valves (PRV's), and open end lines) at
the specified locations (e.g., Building 32--Tube Reactor System, etc.),
and in the specified type of service (e.g., heavy liquid stratified,
light liquid stratified, etc.) shall be limited by the maximum monthly
hours in the following table:
(ii) Recordkeeping.
(A) On and after October 1, 1992, the owner and operator of the
Nalco Chemical Company facility in Bedford Park, Illinois, shall keep
the following records for all fugitive emission sources. These records
shall be compiled on a monthly basis, be retained at the facility for a
period of 3 years, and be made available to the Administrator upon
request.
(1) The total number of hours of organic service for each component
at each location specified in paragraphs (x)(11)(i)(A) (1) through (10)
of this section.
(2) The vapor pressure of each organic compound in each component
at each location specified in paragraphs (x)(11)(i)(A) (1) through (10)
of this section.
(B) [Reserved]
(12) The control and recordkeeping and reporting requirements, as
well as the test methods in this paragraph, apply to the gravure and
screen press operations at the Meyercord Corporation (Meyercord) in
Carol Stream, Illinois, instead of the requirements in paragraphs
(x)(1) through (x)(5) of this section.
(i) After July 1, 1991, no materials which contain volatile organic
material (VOM), including coatings, inks, and cleaning material, may be
used at any gravure or screen press unless the total VOM emissions
remain below 100 tons of VOM for every consecutive 365-day period, or
fraction thereof, starting on July 1, 1991. A new 365-day period starts
on each day. The VOM emissions, which are to be calculated on a daily
basis, are to be added to the VOM emissions for the prior 364 days (but
not including any day prior to July 1, 1991). VOM emissions are based
upon the VOM content of the material and the volume of material used.
The effect of add-on control equipment is not considered in calculating
VOM emissions; that is, the VOM emissions are to be determined as if
the press(es) [[Page 14909]] do(es) not have add-on control equipment.
The applicable test methods and procedures specified in paragraph
(a)(4) of this section are to be used in determining daily VOM
emissions.
(ii) The VOM content of each coating, ink, and cleaning solution
shall be determined by the applicable test methods and procedures
specified in paragraph (a)(4) of this section to establish the records
required under paragraph (x)(12)(ii) of this section. Beginning on July
1, 1991, the owner or operator of the subject presses shall collect and
record all of the following information each day and maintain the
information at the facility for 3 years:
(A) The name and identification number of each coating, ink, and
cleaning solution as applied on any press.
(B) The pounds (lbs) of VOM per gallon of each coating, ink, and
cleaning solution (minus water and any compounds which are specifically
exempted from the definition of VOM) as applied on any press.
(C) The total gallons of each coating, ink, and cleaning solution
(minus water and any compounds which are specifically exempted from the
definition of VOM) used per day.
(D) The total lbs of VOM contained in the volume of each coating,
ink, and cleaning solution used per day on any press. The lbs of VOM
per day is to be calculated by multiplying the lbs of VOM per gallon
(minus water and any compounds which are specifically exempted from the
definition of VOM) times the gallons (minus water and any compounds
which are specifically exempted from the definition of VOM) used per
day.
(E) The total lbs of VOM per day from all coatings, inks, and
cleaning solutions used on all presses. The total lbs of VOM per day is
to be obtained by adding the lbs of VOM per day contained in all
coatings, inks, and cleaning solutions.
(F) Within 7 days after each 365-day period, the VOM emissions (as
calculated in paragraph (x)(12)(ii)(E)) of this section before add-on
control, from the 365-day period, are to be determined.
Starting on July 7, 1992, VOM emissions are to be determined for
the 365 days ending 7 days earlier. Each day concludes a new 365-day
period. However, no VOM emissions are to be included for any days prior
to July 1, 1991. For example, on July 17, 1991, the emissions from July
1, through July 10, 1991, are to be included, whereas on January 7,
1994, the emissions from January 1, 1993, through December 31, 1993,
are to be included.
(13) The control and recordkeeping and reporting requirements, as
well as the test methods in this paragraph, apply to the sheet fed cold
set presses and web heatset presses at the Wallace Computer Services,
Inc. (Wallace) printing and binding plant in Hillside, Illinois,
instead of the requirements in 40 CFR 52.741(h) and 40 CFR 52.741(x)(1)
through 40 CFR 52.741(x)(5).
(i) After July 1, 1991, no inks shall at any time be applied, at
the presses indicated below, which exceed the pounds (lbs) volatile
organic material (VOM) per gallon of ink (minus water and any compounds
which are specifically exempted from the definition of VOM) limit
established for each press. After July 1, 1991, the yearly volume of
ink used at each press, in gallons of ink (minus water and any
compounds which are specifically exempted from the definition of VOM)
per year, shall not exceed the gallons per year limit established below
for each press. The yearly volume of ink used per press is to be
calculated according to the procedure in paragraph (x)(13)(iii) of this
section.
------------------------------------------------------------------------
Lbs VOM/
Press gallon Gallons/
ink year ink
------------------------------------------------------------------------
14.................................................. 1.68 276
16.................................................. 1.68 1896
22.................................................. 3.01 2712
23.................................................. 3.01 13140
25.................................................. 3.01 12720
26.................................................. 3.01 4764
------------------------------------------------------------------------
(ii) After July 1, 1991, no materials (other than those inks
subject to the limits in paragraph (x)(13)(i)) of this section, shall
at any time be applied or used, at the presses indicated below, which
exceed the lbs VOM per gallon of material (minus water and any
compounds which are specifically exempted from the definition of VOM)
limit established for each press. After July 1, 1991, the yearly volume
of material (excluding ink and water) used at each press, in gallons of
material (minus water and any compounds which are specifically exempted
from the definition of VOM) per year, shall not exceed the gallons per
year limit established for each press. The yearly volume of material
(excluding ink and water) used per press is to be calculated according
to the procedure in paragraph (x)(13)(iii) of this section.
------------------------------------------------------------------------
Lbs VOM/ Gallons/
Press gallon year
material material
------------------------------------------------------------------------
14................................................. 6.9 612
16................................................. 6.9 8,340
22................................................. 7.1 360
23................................................. 7.1 480
25................................................. 7.1 516
26................................................. 7.1 1,848
------------------------------------------------------------------------
(iii) The yearly volume of ink/material used is to be calculated as
follows:
(A) Compute the volume of ink/material used each month per press by
the 15th of the following month.
(B) By the 15th of each month, add the monthly ink/material usage
per press for the 12 previous months (to obtain the yearly volume of
ink used).
(iv) Beginning on July 1, 1991, the owner and operator of Wallace's
plant in Hillside, Illinois, shall keep the following records for each
press for each month. All records shall be retained by Wallace for 3
years and shall be made available to the Administrator on request:
(A) The name and identification number of each ink, fountain
solution, fountain solution additive, cleaning solvent, and other VOM
containing material as applied or used.
(B) The weight of VOM per volume of each ink, fountain solution,
fountain solution additive, cleaning solvent, and each other VOM
containing material (minus water and any compounds which are
specifically exempted from the definition of VOM) as applied or used
each month.
(C) The volume of ink (minus water and any compounds which are
specifically exempted from the definition of VOM) as applied each
month.
(D) The total volume of miscellaneous VOM containing materials
(minus water and any compounds which are specifically exempted from the
definition of VOM), other than inks, that are used each month.
(v) Any record showing a violation of paragraph (x)(13)(i) or
(x)(13)(ii) of this section shall be reported by sending a copy of such
record to the Administrator within 30 days of the violation.
(vi) To determine compliance with paragraphs (x)(13)(i) and
(x)(13)(ii) of this section and to establish the records required under
paragraph (x)(13)(iv) of this section the VOM content of each ink and
miscellaneous VOM containing material shall be determined by the
applicable test methods and procedures [[Page 14910]] specified in
paragraph (a)(4) of this section.
[FR Doc. 95-6003 Filed 3-20-95; 8:45 am]
BILLING CODE 6560-50-M
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.