Notice of Receipt of Petition for Decision That Nonconforming 1992 Volvo 740 GL and 940 GL Sedan and Wagon Passenger Cars Are Eligible for Importation

Federal RegisterAug 10, 1995

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. 95-61; Notice 1]

Notice of Receipt of Petition for Decision That Nonconforming

1992 Volvo 740 GL and 940 GL Sedan and Wagon Passenger Cars Are

Eligible for Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming

1992 Volvo 740 GL and 940 GL Sedan and Wagon passenger cars are

eligible for importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces receipt by the National Highway Traffic

Safety Administration (NHTSA) of a petition for a decision that 1992

Volvo 740 GL and 940 GL sedans and wagons that were not originally

manufactured to comply with all applicable Federal motor vehicle safety

standards are eligible for importation into the United States because

(1) they are substantially similar to vehicles that were originally

manufactured for importation into and sale in the United States and

that were certified by their manufacturer as complying with the safety

standards, and (2) they are capable of being readily altered to conform

to the standards.

DATES: The closing date for comments on the petition is September 11,

1995.

ADDRESSES: Comments should refer to the docket number and notice

number, and be submitted to: Docket Section, Room 5109, National

Highway Traffic Safety Administration, 400 Seventh St.,

[[Page 40879]]

SW, Washington, DC 20590. [Docket hours are from 9:30 am to 4 pm]

FOR FURTHER INFORMATION CONTACT:

George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-

5306).

SUPPLEMENTARY INFORMATION:

Background

Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i)(I)

of the National Traffic and Motor Vehicle Safety Act (the Act)), a

motor vehicle that was not originally manufactured to conform to all

applicable Federal motor vehicle safety standards shall be refused

admission into the United States unless NHTSA has decided that the

motor vehicle is substantially similar to a motor vehicle originally

manufactured for importation into and sale in the United States,

certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and

of the same model year as the model of the motor vehicle to be

compared, and is capable of being readily altered to conform to all

applicable Federal motor vehicle safety standards.

Petitions for eligibility decisions may be submitted by either

manufacturers or importers who have registered with NHTSA pursuant to

49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice

in the Federal Register of each petition that it receives, and affords

interested persons an opportunity to comment on the petition. At the

close of the comment period, NHTSA decides, on the basis of the

petition and any comments that it has received, whether the vehicle is

eligible for importation. The agency then publishes this decision in

the Federal Register.

J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer

90-006) has petitioned NHTSA to decide whether 1992 Volvo 740 GL and

940 GL sedans and wagons are eligible for importation into the United

States. The vehicles which J.K. believes are substantially similar are

1992 Volvo 740 GL and 940 GL sedans and wagons that were manufactured

for importation into, and sale in, the United States and certified by

their manufacturer as conforming to all applicable Federal motor

vehicle safety standards.

The petitioner claims that it carefully compared non-U.S. certified

1992 Volvo 740 GL and 940 GL sedans and wagons to their U.S. certified

counterparts, and found the vehicles to be substantially similar with

respect to compliance with most Federal motor vehicle safety standards.

J.K. submitted information with its petition intended to

demonstrate that non-U.S. certified 1992 Volvo 740 GL and 940 GL sedans

and wagons, as originally manufactured, conforms to many Federal motor

vehicle safety standards in the same manner as their U.S. certified

counterparts, or are capable of being readily altered to conform to

those standards.

Specifically, the petitioner claims that non-U.S. certified 1992

Volvo 740 GL and 940 GL sedans and wagons are identical to their U.S.

certified counterparts with respect to compliance with Standards Nos.

102 Transmission Shift Level Sequence * * *, 103 Defrosting and

Defogging Systems, 104 Windshield Wiping and Washing Systems, 105

Hydraulic Brake Systems, 106 Brake Hoses, 107 Reflecting Surfaces, 109

New Pneumatic Tires, 113 Hood Latch Systems, 116 Brake Fluid, 124

Accelerator Control Systems, 201 Occupant Protection in Interior

Impact, 202 Head Restraints, 203 Impact Protection for the Driver From

the Steering Control System, 204 Steering Control Rearward

Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention

Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat

Belt Assembly Anchorages, 211 Wheel Nuts, Wheel Discs and Hubcaps, 212

Windshield Retention, 214 Side Impact Protection, 216 Roof Crush

Resistance, 219 Windshield Zone Intrusion, 301 Fuel System Integrity,

and 302 Flammability of Interior Materials.

Additionally, the petitioner states that non-U.S. certified 1992

Volvo 740 GL and 940 GL sedans and wagons comply with the Bumper

Standard found in 49 CFR Part 581.

Petitioner also contends that these vehicles are capable of being

readily altered to meet the following standards, in the manner

indicated:

Standard No. 101 Controls and Displays: (a) substitution of a lens

marked ``Brake'' for a lens with an ECE symbol on the brake failure

indicator lamp; (b) recalibration of the speedometer/odometer from

kilometers to miles per hour.

Standard No. 108 Lamps, Reflective Devices and Associated

Equipment: (a) Installation of U.S.-model headlamps and front

sidemarkers; (b) installation of U.S.-model taillamp lenses which

incorporate rear sidemarkers; (c) installation of a high mounted stop

lamp.

Standard No. 110 Tire Selection and Rims: installation of a tire

information placard.

Standard No. 111 Rearview Mirror: replacement of the passenger side

rearview mirror with a U.S.-model component.

Standard No. 114 Theft Protection: installation of a warning buzzer

microswitch and a warning buzzer in the steering lock assembly.

Standard No. 115 Vehicle Identification Number: installation of a

VIN plate that can be read from outside the left windshield pillar, and

a VIN reference label on the edge of the door or latch post nearest the

driver.

Standard No. 118 Power Window Systems: installation of a relay in

the power window system so that the window transport is inoperative

when the ignition is switched off.

Standard No. 208 Occupant Crash Protection: (a) installation of a

seat belt warning buzzer; (b) installation of knee bolsters to augment

the vehicles' air bag based passive restraint system, which otherwise

conforms to the standard. The petitioner states that in addition to a

driver's side air bag, the vehicles are equipped with side impact

protection systems, with manual lap and shoulder belts in the front and

rear outboard seating positions, and with a manual lap belt in the

center seating positions.

Interested persons are invited to submit comments on the petition

described above. Comments should refer to the docket number and be

submitted to: Docket Section, National Highway Traffic Safety

Administration, Room 5109, 400 Seventh Street, SW., Washington, DC

20590. It is requested but not required that 10 copies be submitted.

All comments received before the close of business on the closing

date indicated above will be considered, and will be available for

examination in the docket at the above address both before and after

that date. To the extent possible, comments filed after the closing

date will also be considered. Notice of final action on the petition

will be published in the Federal Register pursuant to the authority

indicated below.

Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;

delegations of authority at 49 CFR 1.50 and 501.8.

Issued on: August 4, 1995.

Marilynne Jacobs,

Director, Office of Vehicle Safety Compliance.

[FR Doc. 95-19711 Filed 8-9-95; 8:45 am]

BILLING CODE 4910-59-M

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.