Notice of Preliminary Determination of Sales at Less Than Fair Value: Certain Carbon Steel Butt-weld Pipe Fittings From the United Kingdom

Federal RegisterOct 4, 1994

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF COMMERCE

[A-412-816]

Notice of Preliminary Determination of Sales at Less Than Fair

Value: Certain Carbon Steel Butt-weld Pipe Fittings From the United

Kingdom

AGENCY: Import Administration, International Trade Administration,

Department of Commerce.

EFFECTIVE DATE: October 4, 1994.

FOR FURTHER INFORMATION CONTACT:

Vincent Kane, or Julie Anne Osgood, Office of Countervailing

Investigations, Import Administration, International Trade

Administration, U.S. Department of Commerce, 14th Street and

Constitution Avenue, NW, Washington, D.C. 20230; telephone (202) 482-

2815 or 482-0167, respectively.

Preliminary Determination: We have preliminarily determined that

certain carbon steel butt-weld pipe fittings from the United Kingdom

(``U.K.'') are being sold in the United States at less than fair value,

as provided in section 733 of the Tariff Act of 1930, as amended (the

``Act''). The estimated margins of sales at less than fair value are

shown in the ``Suspension of Liquidation'' section of this notice.

Case History

Since the initiation of this investigation on March 21, 1994 (59 FR

14148, March 25, 1994), the following events have occurred:

On April 11, 1994, the United State International Trade Commission

(``ITC'') issued an affirmative preliminary injury determination (see

ITC Investigation No. 731-TA-694).

In accordance with 19 CFR 353.42(b), the Department of Commerce

(``the Department'') issued its antidumping duty questionnaire to

B.K.L. Fittings Limited (``BKL''), on April 29, 1994. BKL is the only

U.K. producer and exporter named in the petition.

Petitioner requested a 50-day postponement of the preliminary

determination on June 30, 1994. The request was granted by the

Department of Commerce on July 19, 1994 (59 FR 37961, July 26, 1994).

On June 16, 1994, petitioner alleged that BKL was selling the

subject merchandise in the U.K. at less than its cost of production.

After analyzing petitioner's allegation we found reasonable grounds to

believe or suspect that sales in the home market were being made at

less than the cost of production. On August 15, 1994, we issued a cost

of production/constructed value questionnaire to BKL.

On August 4, 1994, petitioner alleged critical circumstances with

regard to imports of certain carbon steel butt-weld pipe fittings from

the U.K.

Scope of Investigation

The products covered by this investigation are certain carbon steel

butt-weld pipe fittings (``pipe fittings'') having an inside diameter

of less than fourteen inches (355 millimeters), imported in either

finished or unfinished condition. Pipe fittings are formed or forged

steel products used to join pipe sections in piping systems where

conditions require permanent welded connections, as distinguished from

fittings based on other methods of fastening (e.g., threaded, grooved,

or bolted fittings). Butt-weld fittings come in a variety of shapes

which include ``elbows,'' ``tees,'' ``caps,,'' and ``reducers.'' The

edges of finished pipe fittings are beveled, so that when a fitting is

placed against the end of a pipe (the ends of which have also been

beveled), a shallow channel is created to accommodate the ``bead'' of

the weld which joins the fitting to the pipe. These pipe fittings are

currently classifiable under subheading 7307.93.3000 of the Harmonized

Tariff Schedule of the United States (``HTSUS'').

Although the HTSUS subheading is provided for convenience and

customs purposes, our written description of the scope of this

proceeding is dispositive.

Period of Investigation

The period of investigation (``POI'') is September 1, 1993, through

February 28, 1994.

Product Comparisons

In making our fair value comparisons, in accordance with the

Department's standard methodology, we first compared sales of

merchandise identical in all respects. If no identical merchandise was

sold, we compared sales of the most similar merchandise, as determined

by the model-matching criteria contained in Appendix V of the

questionnaire (``Appendix V'') (on file in Room B-099 of the main

building of the Department of Commerce (``Public File'')).

We were unable to compare United States sales to home market sales

at the same level of trade in accordance with 19 CFR 353.58 (1994),

because the computer tape submitted by respondent did not identify the

level of trade for each sale. For purposes of our preliminary

determination we compared sales without regard to level of trade.

However, we will request that respondent submit the necessary data on

level of trade to the Department within the regulatory deadlines (see

19 CFR 353.31) and we will take it into consideration in accordance

with 19 CFR 353.58 in our final determination.

Fair Value Comparisons

To determine whether BKL's sales for export to the United States

were made at less than fair value, we compared the United States price

(``USP'') to the foreign market value (``FMV''), as specified in the

``United States Price'' and ``Foreign Market Value'' sections of this

notice. BKL's sales for export to the Untied States and in its home

market involved both identical and similar merchandise. For those U.S.

sales compared to a sale of similar merchandise in the home market, we

made an adjustment, pursuant to 19 CFR 353.57, for physical differences

in merchandise. For certain products, respondent did not provide the

information necessary to make a comparison with the most similar

merchandise based on the model-matching criteria contained in Appendix

V. As those sales accounted for a very small percentage of total sales

of subject merchandise, they have been disregarded in calculating our

preliminary margin.

United States Price

We based USP on purchase price, in accordance with section 772(b)

of the Act, where the subject merchandise was sold to an unrelated

purchaser in the United States before importation and where the use of

exporter's sales price (``ESP'') methodology was not otherwise

indicated.

We calculated purchase price based on packed, c.i.f. import prices

to an unrelated customer in the United States. We made deductions to

the U.S. price, where appropriate, for foreign brokerage, foreign

inland freight, ocean freight and marine insurance, U.S. duty and

brokerage.

Where sales to the first unrelated purchaser took place after

importation of the subject merchandise into the United States, we based

USP on ESP, in accordance with section 772(c) of the Act. Almost all of

the ESP sales of subject merchandise were reported as further

manufactured in the United States.

For ESP sales we made deductions, where appropriate, for discounts,

foreign brokerage, foreign inland freight, ocean freight, marine

insurance, U.S. duty, U.S. inland freight, and U.S. brokerage and

handling. In addition, for ESP sales only, we deducted credit expense,

indirect selling expense, inventory carrying costs, and commissions to

an unrelated agent. For certain ESP sales where respondent did not

provide paydates, we used the average number of credit days in

calculating credit expense.

We made an adjustment to U.S. price for value-added tax (``VAT'')

assessed on comparison sales in the U.K. in accordance with our

practice, pursuant to the Court of International Trade (``CIT'')

decision in Federal-Mogul, et al. v. United States, 834 F. Supp. 1391.

See Preliminary Antidumping Duty Determination: Color Negative

Photographic Paper and Chemical Components from Japan (59 FR 16177,

16179, April 6, 1994), for an explanation of this methodology.

For pipe fittings that were further manufactured in the United

States, we deducted all value added in the United States, pursuant to

section 772(e)(3) of the Act. The value added consists of the cost of

fabrication and general expenses associated with the further

manufacturing operations, as well as a proportional amount of profit or

loss attributable to the further manufacture. We calculated profit or

loss by deducting from the sales price of the further manufactured

merchandise the related production costs and selling expense incurred

by the company in both the U.K. and the United States. We then

allocated total profit or loss proportionately to all components of

cost. We included only the profit or loss allocated to the further

manufacturing portion of total cost in our calculation of value added.

Additionally, we adjusted general and administrative (G&A) expenses

from an allocation based on weight to an allocation based on cost of

sales.

Where respondent did not provide further manufacturing costs for

certain products, we disregarded sales of those products in our

preliminary margin calculation.

Foreign Market Value

In order to determine whether BKL had a sufficient volume of sales

in the home market to serve as the basis for calculating FMV, we

compared the volume of home market sales of subject merchandise to the

volume of third country sales of subject merchandise, in accordance

with section 773(a)(1)(B) of the Act. On this basis, we determined that

the home market was viable.

We calculated FMV based on both f.o.b. plant and delivered prices

inclusive of packing, to customers in the U.K. In light of the decision

of the Court of Appeals for the Federal Circuit in Ad Hoc Committee of

AZ-NM-TX-FL Producers of Gray Portland Cement v. United States, 13 F.

3d 398 (Fed. Cir., January 5, 1994), we deducted post-sale home market

movement charges from the FMV under the circumstance-of-sale provision

of 19 CFR 353.56(a). This adjustment included home market inland

freight.

We deducted rebates, where appropriate, on home market sales. We

deducted home market packing costs and added U.S. packing costs in

accordance with section 773(a)(1) of the Act. In addition, we made

circumstance-of-sale adjustments for differences in credit charges

between the two markets, pursuant to CFR 353.56(a)(2). In calculating

home market credit expense, we used the weighted-average interest rate

paid by respondent on short-term borrowings denominated in British

pounds. In calculating U.S. credit expense, we used the weighted-

average interest rate paid by respondent on short-term dollar

borrowings. For a further discussion of the Department's treatment of

credit in this investigation, please see Memorandum from Barbara R.

Stafford to Susan G. Esserman (September 26, 1994) on file in room B-

099 of the U.S. Department of Commerce.

In accordance with 19 CFR 353.56(b)(1), we deducted home market

indirect selling expenses as an offset to the U.S. commissions, but

capped this deduction by the amount of the ESP commissions and indirect

selling expenses. We adjusted for VAT in accordance with our practice

(see ``United States Price'' section of this notice.)

Cost of Production

Petitioner alleged that BKL made home market sales during the POI

at prices below its cost of production (``COP''). Based on petitioner's

allegations and after examining the evidence on the record, we

concluded that we had reasonable grounds to ``believe or suspect'' that

sales were made below COP. Thus, we initiated a COP investigation

pursuant to section 773(b) of the Act.

We performed a product-specific COP test, in which we examined

whether each home market sale was priced below that product's COP. The

Department defines COP as the sum of direct material, direct labor,

variable and fixed factory overhead, general expenses, and packing

expense, in accordance with 19 CFR 353.51(c). (See, e.g., Preliminary

Results of Antidumping Duty Administrative Review: Polyethylene

Terephthalate Film, Sheet, and Strip From the Republic of Korea (59 FR

35098, 35099, July 8, 1994).) We compared the COP for each product to

the home market unit price, net of rebates, movement expenses, and

indirect expenses. We relied on submitted COP information except for

the calculation of financing expense. The submitted calculation was

based on the combination of the financial statements of BKL and its

parent company without taking into account elimination of intercompany

transactions. Therefore, we recalculated financing expense using the

parent company financial statements only.

In accordance with section 773(b) of the Act, we also examined

whether the home market sales of each product were made at prices below

their COP in substantial quantities over an extended period of time,

and whether such sales were made at prices that would permit recovery

of all costs within a reasonable period of time in the normal course of

trade.

To satisfy the requirement of 773(b)(1) that below cost sales be

disregarded only if made in substantial quantities, the following

methodology was used. For each product where less than ten percent, by

quantity, of the home market sales during the POI were made at prices

below the COP, we included all sales of that model for the computation

of FMV. For each product where ten percent or more, but less than 90

percent, of the home market sales during the POI were priced below the

COP, we excluded from the calculation of FMV those home market sales

which were priced below the COP, provided that the below-cost sales of

that product were made over an extended period of time. Where we found

that more than 90 percent of respondent's sales were at prices below

the COP, and such sales were over an extended period of time, we

disregarded all sales of that product and calculated FMV based on CV.

In order to determine whether below-cost sales had been made over

an extended period of time, we compared the number of months in which

below-cost sales occurred for each product to the number of months in

the POI in which that product was sold. If a product was sold in fewer

than three months during the POI, we did not exclude sales unless there

were below cost sales in each month of sale. If a product was sold in

three or more months, we did not exclude the below-cost sales unless

there were below-cost sales in at least three months during the POI.

(See Preliminary Results and Partial Termination of Antidumping Duty

Administrative Reviews: Tapered Roller Bearings, Four Inches or Less in

Outside Diameter, and Components Thereof, From Japan (58 FR 69336,

69338, December 30, 1993).)

Constructed Value

For those products without an adequate number of sales at prices

equal to or greater than the COP, we based FMV on constructed value

(``CV''), pursuant to section 773(b)(2) of the Act. We calculated CV

based on the sum of the cost of materials, fabrication, general

expenses, U.S. packing costs and profit, in accordance with section

773(e)(1)(B) (i) and (ii) of the Act. We relied on submitted CV

information except for the calculation of financing expense, which we

recalculated as described in the ``Cost of Production'' section of this

notice. We included in our calculation of CV: (1) the greater of BKL's

general expenses or the statutory minimum of ten percent of the cost of

manufacture (``COM''), as appropriate, and; (2) for profit, the greater

of BKL's profit or the statutory minimum of eight percent of the sum of

COM and general expenses.

Currency Conversion

We made currency conversions based on the official exchange rates

in effect on the dates of the U.S. sales as certified by the Federal

Reserve Bank of New York.

Critical Circumstances

Petitioner alleges that critical circumstances exist with respect

to imports of the subject merchandise from the U.K. Section 733(e)(1)

of the Act provides that the Department will determine that there is a

reasonable basis to believe or suspect that critical circumstances

exist if:

(A)(i) There is a history of dumping in the United States or

elsewhere of the class or kind of merchandise which is the subject of

this investigation, or

(ii) The person by whom, or for whose account, the merchandise was

imported knew or should have known that the exporter was selling the

merchandise which is the subject of the investigation at less than its

fair value, and

(B) There have been massive imports of the class or kind of

merchandise which is the subject of the investigation over a relatively

short period.

Regarding (A)(ii) above, we normally consider margins of 15 percent

or more for exporter's sales price sales, and margins of 25 percent or

more for purchase price sales sufficient to input knowledge of dumping.

If the U.S. price is based on both PP and ESP, we normally weight-

average the 25 percent and 15 percent benchmarks by the volume of PP

and ESP sales to arrive at a weighted-average benchmark percentage for

imputing the knowledge of dumping (see, e.g., Notice of Final

Determination of Sales at Less Than Fair Value: Certain Cold-Rolled

Carbon Steel Flat Products From Argentina (58 FR 37078, July 9, 1993)).

The calculated preliminary margin in this investigation indicates

that importers of pipe fittings should have known that the merchandise

was being sold at less than fair value.

Pursuant to 19 CFR 353.16 (f), we generally consider the following

factors in determining whether imports have been massive over a short

period of time: (1) The volume and value of the imports; (2) seasonal

trends (if applicable); and (3) the share of domestic consumption

accounted for by imports.

If imports during the period immediately following the filing of

the petition increase by at least 15 percent over imports during a

comparable period immediately proceeding the filing of a petition, we

normally consider them massive pursuant to section 353.16(f)(2) of the

Department's regulations.

In order to determine whether imports have been massive over a

relatively short period of time, we compared BKL's reported shipments

of butt-weld pipe fittings to the United States in the seven months

after the petition was filed to the seven months immediately before

this period. Our analysis showed that the volume of imports of subject

merchandise to the United States by BKL had increased by more than 15

percent. (See 19 CFR 353.16(f)(2).) Based on this analysis, we

determine that imports of butt-weld pipe fittings from the U.K. were

massive over a relatively short period of time. Accordingly, as the

criteria enumerated in section 733(e)(1) of the Act are met, we

preliminarily determine that critical circumstances exist for imports

of butt-weld pipe fittings from the U.K.

Verification

As provided in section 776(b) of the Act, we will verify

information used in making our final determination.

Suspension of Liquidation

In accordance with section 733(d)(1) of the Act, we are directing

the Customs Service to suspend liquidation of all entries of butt-weld

pipe fittings from the U.K., as defined in the ``Scope of

Investigation'' section of this notice, that are entered or withdrawn

from warehouse for consumption on or after the date 90 days prior to

publication of this notice in the Federal Register. The Customs Service

shall require a cash deposit or posting of a bond equal to the

estimated dumping margins shown below. This suspension of liquidation

will remain in effect until further notice. The estimated preliminary

weighted-average dumping margins are as follows:

------------------------------------------------------------------------

Margin

Manufacturer/producer/exporter percentages

------------------------------------------------------------------------

BKL........................................................ 73.38

All others................................................. 75.38

------------------------------------------------------------------------

ITC Notification

In accordance with section 733(f) of the Act, we have notified the

ITC of our determination. If our final determination is affirmative,

the ITC will determine whether these imports are materially injuring,

or threaten material injury to, the U.S. industry within 75 days after

our final determination.

Public Comment

Interested parties who wish to request a hearing must submit a

written request to the Assistant Secretary for Import Administration,

U.S. Department of Commerce, room B-099, within ten days of the

publication of this notice. Requests should contain: (1) The party's

name, address, and telephone number; (2) the number of participants;

and (3) a list of the issues to be discussed.

In accordance with 19 CFR 353.38, case briefs or other written

comments in a least six copies must be submitted to the Assistant

Secretary no later than November 16, 1994, and rebuttal briefs no later

than November 23, 1994. A hearing, if requested, will be held on

November 28, 1994, at the U.S. Department of Commerce in room 1414.

Parties should confirm by telephone the time, date, and place of the

hearing two days prior to the scheduled date. In accordance with 19 CFR

353.38(b), oral presentations will be limited to issues raised in the

briefs.

We will make our final determination not later than 75 days after

the date of this preliminary determination.

This determination is published pursuant to section 733(f) of the

Act and 19 CFR 353.15(a)(4).

Dated: September 26, 1994.

Susan G. Esserman,

Assistant Secretary for Import Administration.

[FR Doc. 94-24540 Filed 10-3-94; 8:45 am]

BILLING CODE 3510-DS-M

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.