Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination: Stainless Steel Bar From India

Federal RegisterAug 4, 1994

Ask Donna

What actually matters in this document.

Text

DEPARTMENT OF COMMERCE

[A-533-810]

Preliminary Determination of Sales at Less Than Fair Value and

Postponement of Final Determination: Stainless Steel Bar From India

Agency: Import Administration, International Trade Administration,

Department of Commerce.

EFFECTIVE DATE: August 4, 1994.

FOR FURTHER INFORMATION CONTACT: Kate Johnson or Irene Darzenta, Office

of Antidumping Investigations, Import Administration, U.S. Department

of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC

20230; telephone (202) 482-4929 or 482-6320, respectively.

Preliminary Determination

The Department of Commerce (the Department) preliminarily

determines that stainless steel bar (SSB) from India is being, or is

likely to be, sold in the United States at less than fair value, as

provided in section 733 of the Tariff Act of 1930 (the Act), as

amended. The estimated margins are shown in the ``Suspension of

Liquidation'' section of this notice.

Scope of Investigation

The merchandise covered by this investigation is stainless steel

bar (SSB). For purposes of this investigation, the term ``stainless

steel bar'' means articles of stainless steel in straight lengths that

have been either hot-rolled, forged, turned, cold-drawn, cold-rolled or

otherwise cold-finished, or ground, having a uniform solid cross

section along their whole length in the shape of circles, segments of

circles, ovals, rectangles (including squares), triangles, hexagons,

octagons or other convex polygons. SSB includes cold-finished SSBs that

are turned or ground in straight lengths, whether produced from hot-

rolled bar or from straightened and cut rod or wire, and reinforcing

bars that have indentations, ribs, grooves, or other deformations

produced during the rolling process.

Except as specified above, the term does not include stainless

steel semi-finished products, cut length flat-rolled products (i.e.,

cut length rolled products which if less than 4.75 mm in thickness have

a width measuring at least 10 times the thickness, or if 4.75 mm or

more in thickness having a width which exceeds 150 mm and measures at

least twice the thickness), wire (i.e., cold-formed products in coils,

of any uniform solid cross section along their whole length, which do

not conform to the definition of flat-rolled products), and angles,

shapes and sections.

The SSB subject to this investigation is currently classifiable

under subheading 7222.10.0005, 7222.10.0050, 7222.20.0005,

7222.20.0045, 7222.20.0075 and 7222.30.0000 of the Harmonized Tariff

Schedule of the United States (HTSUS). Although the HTSUS subheading is

provided for convenience and customs purposes, our written description

of the scope of this investigation is dispositive.

Period of Investigation

The period of investigation (POI) is July 1, 1993, to December 31,

1993.

Case History

Since the notice of initiation on January 19, 1994 (59 FR 3844,

January 27, 1994), the following events have occurred.

On February 14, 1994, the International Trade Commission (ITC)

issued an affirmative preliminary injury determination (USITC

Publication 2734, February 1994).

On February 25, 1994 we named Grand Foundry, Limited (Grand

Foundry) and Mukand, Limited (Mukand) as respondents in this

investigation, and on February 28, 1994, we issued antidumping

questionnaires to these companies. These companies accounted for at

least 60 percent of the exports of the subject merchandise to the

United States during the POI.

On February 26, 1994, Isibars, Limited (Isibars), an Indian

producer/exporter of subject merchandise which was not selected as a

mandatory respondent, requested that it be allowed to participate in

the investigation as a voluntary respondent. On March 9, 1994, we sent

Isibars a brief questionnaire requesting sales volume and value data

and noted that based upon Isibars response we would determine if it was

appropriate to issue a complete questionnaire to the company. On March

14, 1994, Isibars submitted its response to this questionnaire.

Subsequently, on March 15, the Department issued Isibars a

questionnaire, noting its policy with respect to voluntary respondents.

On March 28, 1994, Isibars requested via facsimile a 30-day extension

in order to respond to the Department's questionnaire. On March 28,

1994, we granted Isibars a partial extension contingent upon receipt of

an officially filed extension request. However, because Isibars never

submitted such an extension request or a response to any section of our

questionnaire, we never deemed it to be a mandatory respondent.

On March 4, 1994, Akai Impex Ltd. (Akai), another Indian producer/

exporter of subject merchandise, requested that it be allowed to

participate in the investigation. Subsequently, on March 7, 1994, we

sent Akai a brief questionnaire requesting sales volume and value data

and noted that based upon Akai's response we would determine if it was

appropriate to issue it a questionnaire. Akai's response to this

questionnaire was received on March 14, 1994. Our examination of this

response revealed that Akai had not made sales of the subject

merchandise to the United States during the POI, and on this basis, we

denied its request for voluntary respondent status on March 17, 1994.

On March 23, 1994, we received a response to Section A of the

Department's questionnaire from Grand Foundry. In that response,

respondent reported that it made no sales of export-quality merchandise

in the home market during the POI. On April 4, 1994, we received

petitioners' comments on Grand Foundry's Section A response. On April

5, 1994, the Department determined that Grand Foundry's third country

sales to Germany were the appropriate basis for foreign market value

(FMV), pursuant to 19 C.F.R. 353.49.

On March 25, 1994, we received comments on the issue of class or

kind of merchandise from interested parties, per the Department's

invitation for such comments in its notice of initiation. On April 13,

1994, we received rebuttal comments on this issue. On May 11, 1994, we

determined that SSB constitutes one class or kind of merchandise. (See

May 11, 1994, Decision Memorandum to Barbara Stafford from The Team Re:

Class or Kind of Merchandise.)

On April 22, 1994, we received a response to Sections B and C of

the Department's questionnaire from Grand Foundry. On May 4, 1994, we

received petitioners' comments regarding Grand Foundry's responses to

Sections B and C. On May 10, 1994, we issued a supplemental

questionnaire to Grand Foundry. Grand Foundry submitted its

supplemental response on June 20, 1994. Mukand never responded to any

section of our antidumping questionnaire.

On April 26, 1994 the Department received a request from

petitioners to postpone the preliminary determination until July 28,

1994. On May 16, 1994, we published in the Federal Register (59 FR

25447), a notice announcing the postponement of the preliminary

determination until not later than July 28, 1994, pursuant to

petitioners' request, in accordance with 19 C.F.R. 353.15(c) and (d).

On May 25, 1994, petitioners alleged that Grand Foundry sold the

subject merchandise in Germany at prices below its cost of production

(COP). Respondent rebutted the allegation on June 2, 1994. Petitioners

supplemented their original allegation on June 7, 1994. On June 15,

1994, we determined that petitioners' allegation provided a reasonable

basis to believe or suspect below cost sales, pursuant to section

353.51(a) of the Department's regulations. Accordingly, we initiated a

sales below cost investigation for Grand Foundry on June 15, 1994, and

subsequently issued Section D of the Department's questionnaire on June

16. On July 8, 1994, Grand Foundry requested an extension of time until

August 1, 1994, to respond to Section D of the questionnaire. The

Department granted such an extension on July 12, 1994.

Also on July 12, Grand Foundry requested that the Department

postpone the final determination until 135 days after the date of

publication of the Department's preliminary determination, if that

determination is affirmative.

Best Information Available

In accordance with section 776(c) of the Act, we have determined

that the use of best information available (BIA) is appropriate for

Mukand. Mukand did not respond to the Department's questionnaire issued

on February 28, 1994. Because Mukand failed to answer the Department's

questionnaire, we find it has not cooperated in this investigation.

As BIA, we are assigning the highest margin among the margins

alleged in the petition, in accordance with the two-tiered BIA

methodology under which the Department imposes the most adverse rate

upon a respondent who refuses to cooperate or otherwise significantly

impedes the proceeding, and as outlined in the Antifriction Bearings

(Other Than Tapered Roller Bearings) and Parts Thereof from the Federal

Republic of Germany; Final Results of Antidumping Duty Administrative

Review (56 FR 31692, 31704, July 11, 1991). The Department's

methodology for assigning BIA has been upheld by the U.S. Court of

Appeals for the Federal Circuit (see Allied-Signal Aerospace Co. v.

United States, Slip Op. 94-1112 (June 30, 1994); and Allied Signal

Aerospace Co. v. United States, 996 F.2d 1185 (Fed. Cir. 1993); see

also Krupp Stahl, AG et al. v. United States, 822 F. Supp. 789 (CIT

1993)).

Such or Similar Comparisons

We have determined that all the products covered by this

investigation constitute a single category of such or similar

merchandise. We made fair value comparisons on this basis. In

accordance with the Department's standard methodology, we first

compared identical merchandise. Where there were no sales of identical

merchandise in the third country market to compare to U.S. sales, we

made similar merchandise comparisons on the basis of the criteria

defined in Appendix V to the antidumping questionnaire, on file in Room

B-099 of the main building of the Department.

We altered the order of the SSB grades specified within the grade

criterion of Appendix V to account for certain other SSB grades which

respondent sold in the third country market during the POI, but which

were not taken into account in Appendix V.

We also reversed the order of the size and shape criteria in

Appendix V. In our original questionnaire issued on February 28, 1994,

the fifth and sixth matching criteria were shape and size,

respectively. However, based on the advice of our in-house technical

expert, we reversed the order of these two criteria. Subsequently,

Acciaierie Valbruna (Valbruna), a respondent in the concurrent

antidumping investigation of SSB from Italy requested that the

Department reconsider the reversal of these criteria in Appendix V.

Specifically, Valbruna argued that the distinguishing factor of SSBs as

compared to all other stainless steel products is that they can be

supplied in a variety of shapes and that the COP and price of SSBs are

influenced significantly more by shape than size. In light of the

arguments raised by Valbruna, we reversed the hierarchy of these

criteria to reflect the order in our original Appendix V. Although the

issue was not raised by any interested party in the instant

investigation, we reversed the order of these criteria to ensure

consistent treatment of respondents in performing product comparisons

across all concurrent SSB investigations.

Fair Value Comparisons

As discussed above, we are using BIA with regard to Mukand and thus

did not make fair value comparisons with regard to this company. For

the remaining company, Grand Foundry, we made fair value comparisons as

discussed below.

To determine whether sales of SSB from Grand Foundry to the United

States were made at less than fair value, we compared the United States

price (``USP'') to the FMV, as specified in the ``United States Price''

and ``Foreign Market Value'' sections of this notice. In accordance

with 19 C.F.R. 353.58, we made comparisons at the same level of trade,

where possible.

United States Price

We based USP on purchase price (PP), in accordance with section

772(b) of the Act, because the subject merchandise was sold to

unrelated purchasers in the United States before importation and

because exporter's sales price methodology was not otherwise indicated.

We calculated PP based on packed CNF prices to unrelated customers.

In accordance with section 772(d)(2)(A) of the Act, we made deductions,

where appropriate, for foreign brokerage (including containerization,

foreign inland freight and port charges) and ocean freight.

Foreign Market Value

In order to determine whether there were sufficient sales of SSB in

the home market to serve as a viable basis for calculating FMV, we

compared the volume of home market sales of SSB to the volume of third

country sales of SSB in accordance with section 773(a)(1)(B) of the

Act. Based on this comparison, we determined that Grand Foundry had a

viable home market with respect to sales of SSB during the POI.

However, based on Grand Foundry's claim that its home market sales made

during the POI consisted only of SSB scrap and rejects and that its

U.S. sales during the same period consisted only of first (or export)

quality SSB, we determined that third country sales would be a more

appropriate basis for FMV. (See April 5, 1994 Decision Memorandum To

Richard W. Moreland From The Team Re: Appropriate Basis for FMV.)

In order to select the appropriate third country in this case, we

examined three factors in accordance with 19 C.F.R. 353.49(b): (1) The

degree of similarity in terms of physical characteristics between the

products sold in the United States and the individual third country

markets; (2) the volume of sales in each third country market relative

to that in the United States; and (3) the similarity of the market

organization and development between the U.S. market and third country

market. Based on these factors, we selected sales to Germany as the

appropriate basis on which to calculate FMV.

In accordance with 19 CFR 353.46, we calculated FMV based on CIF or

CNF prices charged to unrelated customers in Germany.

In light of the Court of Appeals for the Federal Circuit's (CAFC)

decision in Ad Hoc Committee of AZ-NM-TX-FL Producers of Gray Portland

Cement v. United States, 13 F.3d 398 (Fed. Cir. 1994), the Department

no longer can deduct home market movement charges from FMV pursuant to

its inherent power to fill in gaps in the antidumping statute. Instead,

we will adjust for those expenses under the circumstance-of-sale

provision of 19 CFR 353.56(a) and the exporter's sales price offset

provision of 19 CFR 353.56(b)(2), as appropriate. Accordingly, in the

present case, we deducted post-sale home market movement charges from

FMV under the circumstance-of-sale provision of 19 CFR 353.56(a). This

adjustment included home market foreign brokerage (including

containerization, foreign inland freight, loading and port fees), ocean

freight, and marine insurance.

Pursuant to 19 CFR 353.56(a)(2), we made further circumstance-of-

sale adjustments, where appropriate, for differences in credit

expenses, and bank charges (including bank interest, courier charges

and commissions) between the U.S. and third country markets. We

recalculated credit expenses to reflect the revised short-term interest

rate reported by respondent. We deducted third country commissions and

added U.S. indirect selling expenses capped by the amount of third

country commissions.

We also deducted third country packing and added U.S. packing

costs, in accordance with section 773(a)(1) of the Act. We made

adjustments, where appropriate, for differences in the physical

characteristics of the merchandise, in accordance with section

773(a)(4)(C) of the Act.

Cost of Production

Based on petitioner's allegation, and in accordance with section

773(b) of the Act, the Department initiated an investigation to

determine whether Grand Foundry made third country sales of subject

merchandise at prices below its COP, and over an extended period of

time. Although Grand Foundry's COP questionnaire response will be

received too late for consideration for the preliminary determination,

it will be verified and considered for the final determination.

Currency Conversion

We made currency conversions based on the official exchange rates

in effect on the dates of the U.S. sales as certified by the Federal

Reserve Bank of New York. See 19 CFR 353.60(a).

Verification

As provided in section 776(b) of the Act, we will verify the

information used in making our final determination.

Suspension of Liquidation

In accordance with section 733(d)(1) of the Act, we are directing

the Customs Service to suspend liquidation of all entries of SSB from

India, as defined in the ``Scope of Investigation'' section of this

notice, that are entered, or withdrawn from warehouse, for consumption

on or after the date of publication of this notice in the Federal

Register. The Customs Service shall require a cash deposit or the

posting of a bond equal to the estimated preliminary dumping margins,

as shown below. The suspension of liquidation will remain in effect

until further notice. The estimated preliminary dumping margins are as

follows:

------------------------------------------------------------------------

Margin

Manufacturer/Producer/Exporter Percent

------------------------------------------------------------------------

Grand Foundry................................................ 2.67

Mukand....................................................... 21.02

All Others................................................... 11.85

------------------------------------------------------------------------

ITC Notification

In accordance with section 733(f) of the Act, we have notified the

ITC of our determination. If our final determination is affirmative,

the ITC will determine whether imports of the subject merchandise are

materially injuring, or threaten material injury to, the U.S. industry

before the later of 120 days after the date of the preliminary

determination or 45 days after our final determination.

Postponement of Final Determination

Pursuant to section 735(a)(2)(A) of the Act, on July 12, 1994,

Grand Foundry, a significant producer of the subject merchandise,

requested that, in the event of an affirmative preliminary

determination in this investigation, the Department postpone its final

determination until 135 days after the date of publication of an

affirmative preliminary determination. Pursuant to 19 CFR 353.20(b),

because our preliminary determination is affirmative, and no compelling

reasons for denial exist, we are postponing the final determination

until the 135th day after the date of publication of this notice in the

Federal Register.

Public Comment

In accordance with 19 CFR 353.38, case briefs or other written

comments in at least ten copies must be submitted to the Assistant

Secretary for Import Administration no later than November 8, 1994, and

rebuttal briefs no later than November 15, 1994. In accordance with 19

CFR 353.38(b), we will hold a public hearing, if requested, to give

interested parties an opportunity to comment on arguments raised in

case or rebuttal briefs. Tentatively, the hearing will be held on

November 17, 1994 at 9:30 a.m. at the U.S. Department of Commerce, Room

3708, 14th Street and Constitution Avenue NW., Washington, DC 20230.

Parties should confirm by telephone the time, date, and place of the

hearing 48 hours before the scheduled time.

Interested parties who wish to request a hearing must submit a

written request to the Assistant Secretary for Import Administration,

U.S. Department of Commerce, Room B-099, within ten days of the

publication of this notice in the Federal Register. Request should

contain: (1) the party's name, address, and telephone number; (2) the

number of participants; and (3) a list of the issues to be discussed.

In accordance with 19 CFR 353.38(b), oral presentation will be limited

to issues raised in the briefs.

This determination is published pursuant to section 733(f) of the

Act (19 U.S.C. 1673b(f)) and 19 CFR 353.15(a)(4).

Dated: July 28, 1994.

Barbara R. Stafford,

Acting Assistant Secretary for Import Administration.

[FR Doc. 94-19068 Filed 8-3-94; 8:45 am]

BILLING CODE 3510-DS-P

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.