Export Trade Certificate of Review

DEPARTMENT OF COMMERCE

International Trade Administration, Commerce

Export Trade Certificate of Review

ACTION: Notice of Issuance of an Amended Export Trade Certificate of

Review, Application No. 87-9A004.

-----------------------------------------------------------------------

SUMMARY: The Department of Commerce has issued an amendment to the

Export Trade Certificate of Review granted to AMT--The Association For

Manufacturing Technology (``AMT'') on May 19, 1987. Notice of issuance

of the Certificate was published in the Federal Register on May 22,

1987 (52 FR 19371).

FOR FURTHER INFORMATION CONTACT: W. Dawn Busby, Director, Office of

Export Trading Company Affairs, International Trade Administration,

(202) 482-5131. This is not a toll-free number.

SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act

of 1982 (15 U.S.C. sections 4001-21) authorizes the Secretary of

Commerce to issue Export Trade Certificates of Review. The regulations

implementing title III are found at 15 CFR part 325 (1993).

The Office of Export Trading Company Affairs is issuing this notice

pursuant to 15 CFR 325.6(b), which requires the Department of Commerce

to publish a summary of a Certificate in the Federal Register. Under

section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by

the Secretary's determination may, within 30 days of the date of this

notice, bring an action in any appropriate district court of the United

States to set aside the determination on the ground that the

determination is erroneous.

Description of Amended Certificate

Export Trade Certificate of Review No. 87-00004, was issued to

AMT--The Association of Manufacturing Technology on May 19, 1987 (52 FR

19371, May 22, 1987) and previously amended on December 11, 1987 (52 FR

48454, December 22, 1987), January 3, 1989 (54 FR 837, January 10,

1989); April 20, 1989 (54 FR 19427, May 5, 1989); May 31, 1989 (54 FR

24931, June 12, 1989); May 29, 1990 (55 FR 23576, June 11, 1990); June

7, 1991 (56 FR 28140, June 19, 1991); November 27, 1991 (56 FR 63932,

December 6, 1991); and July 20, 1992 (57 FR 33319, July 28, 1992).

AMT's Export Trade Certificate of Review has been amended to:

1. Add each of the following companies as a new ``Member'' of the

Certificate within the meaning of Sec. 325.2 (1) of the Regulations (15

CFR 325.2(1)): BHS-Torin, Inc., Farmington, Connecticut; Bertsche

Engineering Corporation, Buffalo Grove, Illinois; Bohle Machine Tools,

Inc., Farmington Hills, Michigan; Bramac Machine Tool Co., Tucson,

Arizona; Burr King Mfg. Co., Inc., South El Monte, California; Cellular

Concepts Company, Detroit, Michigan (controlling entity: U.S. Equipment

Co.); City Machine Tool & Die Company, Inc., Muncie, Indiana; D & H

Machinery, Inc. Toledo, Ohio; Darex Corporation, Ashland, Oregon;

DeVlieg-Bullard Services Group, Rockford, Illinois (controlling entity:

DeVlieg-Bullard Inc.); Feldmann, Inc., Rockford, Illinois; Industrial

Metal Products Corporation, Lansing, Michigan; Kalamazoo Saw Co.,

Kalamazoo, Michigan (controlling entity: KTS Industries, Inc.);

Komatsu-Cybermation, Medford, Massachusetts (controlling entity:

Komatsu Ltd.); Lasercut, Inc., North Bradford, Connecticut; M T R

Ravensburg, Inc., Rochester, New York; Milltronics Manufacturing

Company, Chanhassen, Minnesota; Modern Machine Tool Company, Jackson,

Michigan; Munson Machinery Company, Inc., Utica, New York; Parlec,

Inc., Fairport, New York; Rofin-Sinar, Inc., Plymouth, Michigan

(controlling entity: Siemens Corporation); Sugino Corporation,

Schaumburg, Illinois (controlling entity: Sugino Machine Ltd.); Utilase

Systems, Inc., Detroit, Michigan; Weldun Flexible Assembly Systems,

Bridgman, Michigan (controlling entity: Weldun International, Robert

Bosch Corp.); Wes-Tech, Inc., Buffalo Grove, Illinois; Herman Williams

Company, Inc., Birmingham, Alabama; and Peter Wolters of America,

Plainville, Massachusetts (Peter Wolters AG);

2. Delete each of the following companies as a ``Member'' of the

Certificate: Abrasive Engineering & Manufacturing; Alpha Machine, Inc.;

American Machine & Science (Katy Inds.); Coherent General, Inc.;

Equipment Systems Technology Company; GTE Valenite Corporation; The

Hill Acme Company; C. O. Hoffacker Company; HZ Clearing Inc.; Jacobson

Tool & Manufacturing Corp.; L & J Press Corporation; Maho Machine Tool

Corporation; Manuflex Corporation; Mega Manufacturing Inc.; Pacific

Press & Shear Inc.; Perfekt Precision Mfg. Co., Inc.; Tannewitz, Inc.;

Truxton Machinery, Inc.; Unipunch Products, Inc.; and Vulcan Tool

Company; and

3. Change the listing of the company name for each current

``Member'' cited in this paragraph to the new listing cited in this

paragraph in parenthesis as follows: American Pfauter Limited (American

Pfauter Limited Partnership); Automation & Modular Components, Inc.

(Automation & Modular Components); Barnes Drill Company (Barnes

International, Inc.); Belden Tools, Inc. (Belden Inc.); Blue Valley

Machine and Mfg. Co., Inc. (Blue Valley Machine and Mfg. Co.); Bracker

Corporation (Bracker Corporation Pittsburgh); Bryant Grinder

Corporation (Vermont-USA Machine Tool Group); Cleveland Punch & Shear

(Bath Iron Works); The Cleveland Tapping Machine Company (TCE

Corporation); Command Corporation (Command Corporation International);

Compumachine Inc. (Compumachine Incorporated); Cooper-Weymouth,

Peterson Div., Reed National Corp. (Cooper-Weymouth, Peterson);

Crankshaft Machine Company (Crankshaft Machine Group); Dake Division,

JSJ Corporation (Dake); Danly Machine Division/Connell Ltd. Partnership

(Danly-Komatsu, L.P.); Digital Electronic Automation, Inc. (DEA); Eaton

Leonard Technologies, Inc. (Eaton Leonard, Inc.); Electro Arc

Manufacturing Co., Inc. (Electro Arc Manufacturing Co.); Esterline

Corporation (Esterline Technologies); Fadal Engineering Company, Inc.

(Fadal Engineering Co., Inc.); Fairfield Machine Co., Inc. (Fairfield

Machine); Fayscott Company (Fayscott Co.); Fellows Corporation

(Vermont-USA Machine Tool Group); Genesis Systems Group Inc. (Genesis

Systems Group); George Fischer--Bohle Machine Tools Corp. (George

Fischer, Ltd.); Gleason Corporation (The Gleason Corporation); Gold

Crown Machinery, Inc. (Goldcrown Machinery); Greenfield Industries--

Geometric Division (Greenfield Industries); Hansvedt Industries, Inc.

(Hansvedt EDM Division); Harper Company (Harper Surface Finishing

Systems, Inc.); HEM, Inc. (HE&M Saw); P. R. Hoffman Machine Products

Co. (P. R. Hoffman Machine Products); Hoglund Corporation (Hoglund

Technology Corporation); Imperial Stamp & Engraving Co., Inc. (Imperial

Stamp & Engraving Company); Jarvis Corporation (Jarvis Products

Corporation); Jones & Lamson-Vermont Corp. (Vermont-USA Machine Tool

Group); Litton Industrial Automation--Machining & Assembly Sys. Div.

(Litton Industrial Automation); Lynn Electronics Corp. (Lynn

Electronics Corporation); J.M. Montgomery Mfg. Inc. (J.M. Montgomery

Manufacturing Inc.); Multipress Incorporated (Multipress Division);

National Acme Co. (The National Acme Company); National Broach &

Machine Company (National Broach & Machine Co.); The Ohio Broach

Machine Co. (The Ohio Broach & Machine Co.); Okuma Machinery, Inc.

(Okuma Inc.); Peerless (Peerless Saw Division--Wisconsin Automated

Machinery); PH Hydraulics & Automation, Inc. (P H Hydraulics and

Automation, Inc.); PMC Industries, Inc. (PMC Industries); PS Group,

Inc. (PS Group); Pope Machinery Inc. (Pope Corporation); Rank Pneumo

Inc. (Rank Taylor Hobson Inc.); Republic Lagun CNC Corporation

(Republic Lagun Machine Tool Co.); The S-P Manufacturing Corporation

(S-P/Sheffer International, Inc.); Seneca Falls Machine Tool Co., Inc.

(Seneca Falls Technology Group); Setco Industries, Inc. (Setco Sales

Company); South Bend Lathe, Inc. (South Bend Lathe Corp.); and Teledyne

Industries, Inc. (Teledyne).

A copy of the amended certificate will be kept in the International

Trade Administration's Freedom of Information Records Inspection

Facility, room 4102, U.S. Department of Commerce, 14th Street and

Constitution Avenue, NW., Washington, DC 20230.

Dated: May 10, 1994.

W. Dawn Busby,

Director, Office of Export Trading Company Affairs.

[FR Doc. 94-11963 Filed 5-16-94; 8:45 am]

BILLING CODE 3510-DR-P