Small Business Size Standards: Manufacturing and Industries With Employee-Based Size Standards in Other Sectors Except Wholesale Trade and Retail Trade

Federal RegisterFeb 15, 2023

Ask Donna

What actually matters in this document.

Text

SMALL BUSINESS ADMINISTRATION

13 CFR Part 121

RIN 3245-AH09

Small Business Size Standards: Manufacturing and Industries With Employee-Based Size Standards in Other Sectors Except Wholesale Trade and Retail Trade

AGENCY:

U.S. Small Business Administration.

ACTION:

Final rule.

SUMMARY:

The U.S. Small Business Administration (SBA or the Agency) is increasing its employee-based small business size definitions (commonly referred to as “size standards”) for North American Industry Classification System (NAICS) sectors related to Mining, Quarrying, and Oil and Gas Extraction (Sector 21); Utilities (Sector 22); Manufacturing (Sector 31-33); Transportation and Warehousing (Sector 48-49); Information (Section 51); Finance and Insurance (Sector 52); Professional, Scientific and Technical Services (Sector 54); and Administrative and Support, Waste Management and Remediation Services (Sector 56). Specifically, in terms of industries defined under the NAICS 2022 revision, SBA is increasing 144 and retaining 268 employee-based size standards in those sectors. SBA is also retaining the current 500-employee size standard for Federal procurement of supplies under the nonmanufacturer rule.

DATES:

This rule is effective March 17, 2023.

FOR FURTHER INFORMATION CONTACT:

Samuel Castilla, Economist, Office of Size Standards, (202) 205-6618 or

sizestandards@sba.gov.

SUPPLEMENTARY INFORMATION:

Discussion of Size Standards

To determine eligibility for Federal small business assistance, SBA establishes small business size definitions (usually referred to as “size standards”) for private sector industries in the United States. SBA uses two primary measures of business size for size standards purposes: average annual receipts and average number of employees. SBA uses financial assets for certain financial industries and refining capacity, in addition to employees, for the petroleum refining industry to measure business size. In addition, SBA's Small Business Investment Company (SBIC), Certified Development Company (CDC/504), and 7(a) Loan Programs use either the industry-based size standards or tangible net worth and net income-based alternative size standards to determine eligibility for those programs.

In September 2010, Congress passed the Small Business Jobs Act of 2010 (Pub. L. 111-240, 124 Stat. 2504, September 27, 2010) (“Jobs Act”), requiring SBA to review all size standards every five years and make necessary adjustments to reflect current industry and market conditions. In accordance with the Jobs Act, in early 2016, SBA completed the first five-year review of all size standards—except those for agricultural enterprises for which size standards were previously set by Congress—and made appropriate adjustments to size standards for a number of industries to reflect current industry and Federal market conditions. SBA also adjusts its monetary-based size standards for inflation at least once every five years. An interim final rule on SBA's latest inflation adjustment to size standards, effective December 19, 2022, was published in the

Federal Register

on November 17, 2022 (87 FR 69118). SBA also updates its size standards every five years to adopt the Office of Management and Budget's (OMB) quinquennial North American Industry Classification (NAICS) revisions to its table of small business size standards. On December 21, 2021, OMB published its “Notice of NAICS 2022 Final Decisions . . .” (86 FR 72277), accepting the Economic Classification Policy Committee (ECPC) recommendations, as outlined in the July 2, 2021,

Federal Register

notice (86 FR 35350), for “the 2022 Revision to the North American Industry Classification System (NAICS), . . . .” On July 5, 2022, SBA issued a proposed rule to adopt the OMB's NAICS 2022 revisions for its table of size standards (87 FR 40034), which SBA finalized in September 2022 with an effective date of October 1, 2022 (87 FR 59240; September 29, 2022).

This final rule is part of a series of final rules that revised size standards of industries grouped by various NAICS sectors. Rather than revise all size standards at one time, SBA is revising size standards by grouping industries within various NAICS sectors that use the same size measure (

i.e.,

employees or receipts). In the prior review, SBA revised size standards mostly on a sector-by-sector basis. As part of the second five-year review of size standards under the Jobs Act, SBA has already issued five final rules reviewing all monetary-based size standards and all employee-based size standards that are part of the Wholesale Trade and Retail Trade sectors.

See Small Business Size Standards: Agriculture, Forestry, Fishing and Hunting; Mining, Quarrying, and Oil and Gas Extraction; Utilities; Construction (87 FR 18607; March 31, 2022), Small Business Size Standards: Transportation and Warehousing; Information; Finance and Insurance; Real Estate and Rental and Leasing (87 FR 18627; March 31, 2022), Small Business Size Standards: Professional, Scientific and Technical Services; Management of Companies and Enterprises; Administrative and Support and Waste Management and Remediation Services (87 FR 18665; March 31, 2022), Small Business Size Standards: Education Services; Health Care and Social Assistance; Arts, Entertainment and Recreation; Accommodation and Food Services; Other Services (87 FR 18646; March 31, 2022), and Small Business Size Standards: Wholesale Trade and Retail Trade (87 FR 35869; June 14, 2022).

To complete its second five-year review of size standards, SBA reviewed size standards under Sector 31-33 and other sectors with employee-based size standards not part of Wholesale and Retail Trade sectors to determine whether the existing size standards should be retained or revised based on the current industry and Federal market data. After its review, SBA published in the April 26, 2022, issue of the

Federal Register

(87 FR 24752) a proposed rule (“April 2022 proposed rule”) to increase the employee-based size standards for 150 industries or subindustries (or “exceptions”) under NAICS 2017, including 10 industries in NAICS Sector 21 (Mining, Quarrying, and Oil and Gas Extraction), 10 industries in NAICS Sector 22 (Utilities), 120 industries in NAICS sector 31-33 (Manufacturing), five industries in Sector 48-49 (Transportation and Warehousing), three industries in Sector 51 (Information), one subindustry (“exception”) in Sector 54 (Professional, Scientific and Technical Services), and one subindustry (“exception”) in Sector 56 (Administrative and Support, Waste Management and Remediation Services). SBA also proposed to retain the 500-employee size standard under its nonmanufacturer rule.

In this final rule, SBA is adopting the proposed size standards from the April 2022 proposed rule without change and applying the adopted changes to the recently adopted NAICS 2022 structure following the methodology outlined in the NAICS 2022 adoption final rule.

In conjunction with the current, second five-year comprehensive size standards review, SBA developed a revised “Size Standards Methodology” (Methodology) for developing, reviewing, and modifying size standards, when necessary. SBA's revised Methodology provides a detailed description of its analyses of various industry and program factors

and data sources, and how the agency uses the results to establish and revise size standards. In the proposed rule itself, SBA detailed how it applied its revised Methodology to review and modify, where necessary, the existing size standards for industries covered in this final rule. Prior to finalizing the revised Methodology, SBA issued a notification in the April 27, 2018, edition of the

Federal Register

(83 FR 18468) to solicit comments from the public and notify stakeholders of the proposed changes to the Methodology. SBA considered all public comments in finalizing the revised Methodology. For a summary of comments and SBA's responses, refer to the SBA's April 11, 2019,

Federal Register

notification (84 FR 14587) of the issuance of the final revised Methodology. SBA's Size Standard Methodology is available on its website at

www.sba.gov/size.

In evaluating an industry's size standard, as described in its Size Standards Methodology as well as in the April 2022 proposed rule, SBA examines its characteristics (such as average firm size, startup costs and entry barriers, industry competition and distribution of firms by size) and the small business level and share of Federal contract dollars in that industry. SBA also examines the potential impact a size standard revision might have on its financial assistance programs, and whether a business concern under a revised size standard would be dominant in its industry. SBA analyzed the characteristics of each employee-based industry in NAICS Sector 31-33 and other sectors with employee-based size standards, mostly using a special tabulation obtained from the U.S. Bureau of the Census from its 2012 Economic Census (the latest available when the proposed rule was developed). The 2012 Economic Census special tabulation contains information for different levels of NAICS categories on average and median firm size in terms of both receipts and employment, total receipts generated by the four and eight largest firms, the Herfindahl-Hirschman Index (HHI), the Gini coefficient, and size distributions of firms by various receipts and employment size groupings. To evaluate average asset size, SBA combines the sales to total assets ratios by industry, obtained from the Risk Management Association's (RMA) Annual eStatement Studies (

http://www.rmahq.org/estatement-studies/

) with the simple average receipts size by industry from the 2012 Economic Census tabulation to estimate the average assets size for each industry. SBA also evaluated the small business level and share of Federal contracts in each of the industries using data from the Federal Procurement Data System—Next Generation (FPDS-NG) for fiscal years 2016-2018. Table 4 of the April 2022 proposed rule, Size Standards Supported by Each Factor for Each Industry (Employees), shows the results of analyses of industry and Federal contracting factors for each industry and subindustry (“exception”) covered by the proposed rule. Of the 427 industries and 5 subindustries (

i.e.,

“exceptions”) reviewed in the proposed rule, the results from analyses of the latest available data on the five primary factors discussed above supported increasing employee-based size standards for 157 industries and 2 subindustries (“exceptions”), decreasing size standards for 216 industries, and maintaining size standards for 54 industries and 3 subindustries (“exceptions”). Table 1, Summary of Calculated Size Standards (NAICS 2017), below, summarizes the analytical results from the April 2022 proposed rule by NAICS sector.

Table 1—Summary of Calculated Size Standards

[NAICS 2017]

NAICS

sector

NAICS sector title

Number of size standards reviewed

Number of size standards increased

Number of size standards decreased

Number of size standards maintained

Mining, Quarrying, and Oil and Gas Extraction

Utilities

31-33

Manufacturing

360

123

187

48-49

Transportation and Warehousing

Information

Professional, Scientific and Technical Services

Other

Agriculture, Forestry, Fishing and Hunting (Sector 11); Finance and Insurance (Sector 52); Administrative and Support, Waste Management and Remediation Services (Sector 56)

Total

432

159

216

In the April 2022 proposed rule, SBA discussed the impacts of the COVID-19 pandemic on small businesses and greater society. Recognizing the wide-ranging economic impacts of the pandemic, SBA decided not to lower any size standards for which the analysis suggested lowering them. Instead, SBA proposed to maintain all size standards for industries in which the analytical results supported a decrease or no change to size standards and adopt all size standards for which the analytical results supported an increase to size standards, except for nine industries where SBA's evaluation of dominance in field of operation indicated that size standards should be maintained at the current levels to exclude dominant firms and one industry for which SBA proposed to adopt a smaller increase to the size standard also to exclude dominant firms.

In the April 2022 proposed rule, SBA also evaluated the 500-employee size standard applicable to nonmanufacturers participating in the Federal contracting market. SBA's regulations at 13 CFR 121.406 require small business concerns to meet certain requirements when they offer to the Government an end item they did not manufacture, process, or produce. These requirements are known as the nonmanufacturer rule. To qualify for a Federal Government supply contract set aside for small business, a nonmanufacturer must have an average of 500 or fewer employees over the past 24 months, be primarily engaged in wholesale or retail trade activities and supply the product of a U.S. small

manufacturer.

In the proposed rule, SBA proposed to retain the 500-employee size standard under the nonmanufacturer rule.

On June 6, 2022, SBA issued a final rule implementing section 863 of the National Defense Authorization Act for Fiscal Year 2021, Public Law 116-283, which changed the averaging period for calculating employees for SBA's employee-based size standards from 12 months to 24 months (87 FR 34094).

In the Request for Comments section of the proposed rule, SBA requested comments on the appropriateness of the current 500-employee size standard under the nonmanufacturer rule and suggestions for alternative measures to an employee-based size standard that would be more appropriate for size determination of nonmanufacturers.

SBA also sought comments on its proposal to increase size standards for 150 industries and retain the current size standards for the remaining 282 industries or subindustries (“exceptions”) in Sector 31-33 and other sectors with employee-based size standards (excluding Wholesale Trade and Retail Trade Sectors). Specifically, SBA requested comments on whether the proposed revisions are appropriate for the industries covered by the proposed rule; whether the decision not to lower any size standards is justified by considerations of impacts of the COVID-19 pandemic; whether the equal weighting of individual factors to derive an industry size standard is appropriate; and whether the data sources used in developing proposed size standards were appropriate or sufficient. SBA also sought comments on its evaluation of specific industries or subindustries (“exceptions”), including the Information Technology Value Added Resellers (ITVAR) exception to NAICS 541519 (Other Computer Related Services), NAICS 482111 (Line Haul Railroads), NAICS 482112 (Short Line Railroads), the Environmental Remediation Services (ERS) exception to NAICS 562910 (Remediation Services), and certain industries for which SBA adjusted calculated size standards based on its analysis of dominance in field of operation.

To evaluate the impact of the changes to size standards adopted in this final rule on the Federal contracting market and SBA's loan programs, SBA analyzed FPDS-NG data for fiscal years 2018-2020 and internal data on its guaranteed and disaster loan programs for fiscal years 2018-2020. The results of this analysis can be found in the Regulatory Impact Analysis section of this final rule.

In accordance with 13 CFR 121.102(e), SBA advises eligible parties of the option to file a petition for reconsideration of a revised, modified, or established size standard at SBA's Office of Hearings and Appeals (OHA) within 30 calendar days after publication of this final rule in accordance with 15 U.S.C. 632(a)(9) and 13 CFR 134 Subpart I. OHA can be reached using the following contact information: by mail at U.S. Small Business Administration, Office of Hearings and Appeals, 409 Third St. SW, Eighth Floor, Washington, DC 20416, by email at

ohafilings@sba.gov,

by phone at (202) 401-8200 TTY/TRS: 711, or by fax at (202) 205-7059.

Discussion of Comments

SBA received a total of 49 comments on the proposed rule, 37 of which pertained to SBA's proposal to increase the size standard for the ERS exception to NAICS 562910 from 750 employees to 1,000 employees. Of the 37 comments pertaining to the ERS exception, 28 opposed SBA's proposed increase to the size standard and nine supported SBA's proposal. SBA also received five comments pertaining to general size standards issues, two comments that pertained to SBA's proposal to retain the 500-employee size standard under its nonmanufacturer rule, one comment on the ITVAR exception to NAICS 541519, one comment on SBA's proposed size standards for power generation industries, one comment on NAICS 315210 (Cut and Sew Apparel Contractors), one comment on NAICS 333310 (Commercial and Service Industry Machinery Manufacturing), and one comment that was outside the scope of the rule.

As mandated by section 1344 of the Jobs Act, SBA is required to hold not less than two public forums during its quinquennial review of size standards. SBA held two virtual public forums on size standards to update the public on the status of the ongoing second five-year review of size standards and to consider public testimony on changes contained in the April 26, 2022, proposed rule. The two virtual public forums on size standards were held on June 14, 2022, and on June 16, 2022. The comments received during the virtual public forums are included in the count of comments above. All comments to the proposed rule, including those received as part of the virtual public forums, are available at

www.regulations.gov

(RIN 3245-AH09) and are summarized and discussed by topic below.

Comments Received During SBA's Virtual Public Forums on Size Standards

As explained in the Discussion of Comments section above, on June 14 and June 16, 2022, SBA held a series of two virtual public forums on size standards to update the public on the status of the ongoing second five-year review of size standards and to consider public testimony on proposed changes contained in the April 26, 2022, proposed rule. Over the course of the two days, of 87 total participants, SBA received testimony from eight commenters, of which seven provided comments pertaining to the SBA's proposal to increase the size standard for the ERS exception from 750 employees to 1,000 employees and one provided comments pertaining to SBA's increases to size standards generally. Of the seven comments that pertained to the ERS exception, one commenter expressed support for the SBA's proposed increase to the size standard from 750 employees to 1,000 employees, while six commenters opposed the proposed increase, asking for a lower size standard.

Regarding the public forum comments pertaining to the ERS exception, one commenter supporting the SBA's proposed change expressed that by raising the size standard to 1,000 employees, SBA will support the creation of a healthy industrial base of ERS providers for Federal clients and make it easier for small businesses to build the strength and capabilities needed to grow and successfully graduate from small business status. This commenter also urged SBA to consider adopting a size standard of 1,200 employees based on SBA's analysis in the proposed rule of all firms operating under the ERS exception regardless of whether ERS was their primary business activity.

Commenters opposed to SBA's proposed increase to the size standard for the ERS exception expressed that SBA's proposed change would adversely impact smaller small businesses. One commenter also argued that SBA's reliance on Federal contracting data for fiscal years 2016-2018 led the Agency to make incorrect conclusions about industry trends following SBA's prior increase to the ERS size standard from 500 employees to 750 employees, which resulted in SBA proposing a size standard above what SBA's analysis would support if more recent data were used. Specifically, the commenter pointed out that part of SBA's rationale for increasing the size standard for the ERS

exception is to address the decline in small business participation that occurred during fiscal years 2016-2018; however, the commenter maintained that, based on the latest available data, small business participation has increased significantly since that period. The commenter further explained that one reason for the lag between SBA's previous increase to the size standard for ERS and a corresponding increase in small business participation in the Federal market could be due to the nature of the Federal Government's procurement process in general which in some cases could take months, if not years, to award contracts due to protests, shifting agency priorities, funding levels, and other issues. Moreover, this commenter raised concerns that the Department of Energy's (DOE) reliance on management and operating (M&O) contractors, of which most are large businesses, may have skewed SBA's results. The commenter argued that if SBA excludes DOE's M&O contracts under the ERS exception from its analysis of industry factors, small business participation would be far more robust than what SBA reported in the proposed rule.

Another commenter expressing similar concerns about SBA's use of data from fiscal years 2016-2018 to measure small business participation in the Federal market also urged SBA to consider startup costs in its analysis of the industry size standard and utilize more recent data from the Engineering News-Record (ENR) (an industry trade publication) of the top 200 ENR firms in the industry when describing the economic characteristics of ERS firms. Another commenter urged SBA to consider the Environmental Protection Agency's (EPA) Region 2 Superfund program as a representation of the NAICS 562910 remediation industry. The commenter argued that these program data demonstrate the ability of firms well under the current 750-employee size standard to fulfill the Federal Government's small business remediation requirements; thus, it is unnecessary for SBA to increase the size standard beyond the current threshold as the added competition from larger firms could impact the number of opportunities available for smaller small firms that are already thriving under the current 750-employee size standard. SBA received three comments expressing agreement with this commenter, specifically in support of the notion that the current size standard of 750 employees is already appropriate.

Besides comments pertaining to the ERS exception, during the public forums on size standards, SBA also received one comment from a business operating under NAICS 561110 (Office of Administrative Services) pertaining to SBA's review of size standards generally. The commenter opposed any increases to size standards at this time, citing concerns about an impending economic recession, category management impacts, and best-in-class requirements, which together, reduce small business opportunities and eventually the total number of small businesses participating in the Federal market. The commenter urged SBA to help small businesses facing these concerns by improving its engagement efforts through increased access to financial assistance and other support rather than increasing size standards.

The comments received during the virtual public forums that pertain to the ERS exception closely mirror the public submissions received electronically through the

www.regulations.gov

portal. In fact, many commenters at the virtual public forums also submitted more detailed comments in writing, elaborating on their oral testimony. Thus, SBA is addressing these comments as part of its summary and response to comments under the Comments to the Exception to NAICS 562910 (Environmental Remediation Services) section of this final rule. Similarly, SBA responds to the comment opposing increases to size standards generally as part of its summary and response to comments under the General Comments on SBA's Proposed Changes to Size Standards section of this final rule.

Comments on SBA's Proposed Changes to Power Generation Industries

SBA received one comment from a national trade association representing nearly 900 local electric cooperatives and other rural electric utilities supporting SBA's proposed changes to size standards for industries under NAICS Sector 22 (Utilities). Specifically, the association agreed with SBA's decision to maintain the current size standard for NAICS 221116 and adopt adjusted calculated increases to size standards for NAICS 221111, 221112, 221113, 221114, 221115, 221116, 221117, 221118, and 221210 based on SBA's analysis of dominance in field of operation.

SBA Response

SBA appreciates the association's comments supporting SBA's proposed size standards for several select industries under Sector 22, Utilities. SBA agrees that the proposed size standards are appropriate in terms of industry market conditions in those industries and believes that the changes will ensure access to SBA's programs for the intended beneficiaries within these industries while excluding the largest and potentially dominant firms from being considered small. Thus, in the absence of opposing comments, SBA is adopting the proposed size standards for Sector 22 industries, as proposed.

Comments on the Federal Procurement Size Standard for Nonmanufacturers

SBA received one comment, expressing support for SBA's proposal to maintain the current 500-employee size standard for nonmanufacturers. The commenter expressed concern that if SBA were to adopt a receipt-based size standard, as explored by SBA in the proposed rule, thousands of firms that currently qualify as small under the 500-employee nonmanufacturer size standard would lose their eligibility to seek set-aside procurements for small businesses. The commenter further explained that a receipts-based size standard would likely limit sales volume for most resellers while also impacting their ability to maintain satisfactory employment levels. Thus, the commenter urged SBA to retain the current 500-employee size standard for nonmanufacturer resellers.

SBA also received one comment opposing SBA's proposal to maintain the current 500-employee size standard for nonmanufacturers. The commenter believed that SBA provided an insufficient and non-compelling rationale for not adopting the calculated size standard of 550 employees for nonmanufacturers, and instead proposing to maintain the current 500-employee size standard. Specifically, the commenter expressed that SBA's rationale to maintain the size standard simply because it is familiar to the industry and working well in practice sets a bad and arbitrary precedent. Thus, the commenter urged SBA to follow the results of its analysis and increase the size standard for nonmanufacturers to 550 employees, as suggested by the results. This commenter also expressed support for maintaining an employee-based size standard for nonmanufacturers rather than adopting a receipts-based size standard.

SBA Response

SBA agrees with commenters that an employee-based size standard is most appropriate for nonmanufacturers. In the proposed rule, as an alternative, SBA calculated a receipts-based size standard of $27 million for nonmanufacturers. However, although SBA evaluated a receipt-based size standard for nonmanufacturers, SBA

believes that adopting a receipts-based size standard, instead of an employee-based size standard, would be inappropriate for several reasons. Specifically, the Small Business Act provides that the size of manufacturing firms be based on the number of employees and that the size of services firms be based on average annual receipts. Adopting a receipts-based size standard under the nonmanufacturer rule, which currently applies only to Government acquisitions for supplies, would cause many manufacturing concerns supplying products to the Government as nonmanufacturers under the nonmanufacturer rule to be evaluated under a receipts-based size standard, which would be contrary to the requirements of the Small Business Act. Moreover, based on data from the 2017 Economic Census, SBA determined that under the calculated $27 million receipts-based size standard, more than 35,000 firms would lose their small business status they currently enjoy under the 500-employee nonmanufacturer size standard. Thus, as proposed, SBA is maintaining an employee-based size standard for nonmanufacturers.

With respect to the comment petitioning SBA to adopt 550 employees as the size standard for nonmanufacturers as suggested by SBA's analytical results, SBA disagrees that its rationale for maintaining the 500-employee size standard is arbitrary. As explained in the proposed rule, the analytical results support raising the size standard for nonmanufacturers from 500 employees to 550 employees. However, to maintain continuity with general public familiarity with and long acceptability of the 500-employee nonmanufacturer size standard, SBA proposed to maintain the current 500-employee size standard. In the proposed rule, SBA clarified why it believed that the 500-employee size standard is appropriate and working well for the majority of firms to which it applies, explaining that the 500-employee size standard for nonmanufacturers is also the most common size standard among the manufacturing industries (NAICS Sector 31-33) where some manufacturers bid on supply contracts under which they do not propose to produce the particular product to be supplied with their own labor force, notwithstanding that they are capable of doing so, and therefore must qualify as small businesses under the nonmanufacturer rule. Thus, SBA believes that maintaining 500 employees as the size standard for nonmanufacturers would promote consistency in its regulations and increase compliance. Therefore, in an effort to minimize the adverse consequences on manufacturers who may provide supplies to the Federal Government as nonmanufacturers under the nonmanufacturer rule, and to promote fair competition among manufacturers and nonmanufacturers, SBA is adopting the predominant 500-employee size standard for manufacturers as the size standard for nonmanufacturers who desire to bid on Federal supply contracts.

Comments on the Application of the Nonmanufacturer Rule to Information Technology Value Added Resellers (ITVARs)

SBA received one comment urging SBA to reconsider whether the nonmanufacturer rule should apply to the ITVAR exception to NAICS 541519 (Other Computer Related Services). The commenter expressed that it may be inconsistent for SBA to apply the nonmanufacturer rule to the ITVAR exception when most or all of the supplies provided by resellers under this exception would fall under one of the NAICS codes for which class waivers currently exist.

SBA Response

As stated in Footnote 18 to SBA's table of size standards at 13 CFR 121.201, for a Federal contract to be classified under the ITVAR exception and its 150-employee size standard, it must consist of at least 15 percent, but not more than 50 percent of value-added services. In addition, the offeror must comply with the manufacturing performance requirements, or comply with the nonmanufacturer rule by supplying the products of small business concerns, unless SBA has issued a class or contract specific (individual) waiver of the nonmanufacturer rule.

While SBA agrees with the commenter that class waivers may already exist for some IT products commonly purchased using the ITVAR exception, SBA also acknowledges that not all IT products procured through the ITVAR exception have a waiver of its nonmanufacturer rule. Moreover, considering the rapid pace of development in the IT industry, SBA believes that it is not unreasonable to assume that there will be new products purchased by the Federal Government using the ITVAR exception in the future that likewise do not qualify for a waiver. Thus, by eliminating the nonmanufacturer rule for the exception, SBA could disadvantage small firms who are currently offering, or plan to offer products not subject to a class waiver.

SBA also believes it would be inconsistent with the intent of the Small Business Act if ITVAR resellers could provide the supplies produced primarily by a large original equipment manufacturer (OEM), or other large manufacturers, without a waiver of the nonmanufacturer rule. SBA is concerned that without the compliance with the nonmanufacturer rule, the ITVAR exception may allow small IT resellers to simply serve as “pass throughs” for large OEMs and other large manufacturers. While SBA recognizes that the nonmanufacturer rule may work better for some products than for others, it strongly believes that the rule must apply to all supply contracts equally. Thus, like all other products and supplies, the nonmanufacturer rule must also apply to IT products, including those purchased through the ITVAR exception. Therefore, SBA is retaining the requirement that the supply component of small business set-aside ITVAR contracts must comply with the manufacturing performance requirements or the SBA's nonmanufacturer rule.

Comments on NAICS 315210 (Cut and Sew Apparel Contractors)

SBA received one comment petitioning SBA to increase the size standard for NAICS 315210 (Cut and Sew Apparel Contractors) from 750 employees to 1,500 employees. The commenter maintained that the manufacture of personal protection equipment (PPE) by Cut and Sew Apparel Contractors and the reliance of the Federal Government on this industry to satisfy strategic objectives related to sourcing PPE equipment and supplies domestically suggests that the threshold should be larger than 750 employees. Elaborating on this idea, the commenter explained that increasing the size standard would allow PPE manufacturers to sufficiently scale up their operations to meet the Federal Government's demand at lower costs. Moreover, the commenter presented data to show the high fixed costs of production and relative labor intensity of Cut and Sew Apparel Contractors relative to other manufacturing industries, which the commenter believed justified an increase to the size standard when considering the strategic importance of firms within the Cut and Sew Apparel Contractor industry. The commenter also argued that, due to the pandemic, the distribution of goods being produced by Cut and Sew Apparel Contractors has changed, and as a result,

these companies must invest significantly more in property, plant, and equipment if they are to become more cost-efficient producers of PPE. The commenter explained that in order to meet the Federal Government's demands for quality and quantity of goods for PPE purchases, companies must be larger, both in terms of capital investment and employment size. However, the commenter did not provide any data on industry and Federal contracting factors showing why the size standard for the Cut and Sew Apparel Contractor industry should be increased from 750 employees to 1,500 employees.

SBA Response

SBA disagrees with the commenter's argument that SBA should increase the size standard for NAICS 315210 based on the industry's importance to Government purchases of PPE. Specifically, SBA believes that the commenter may have mis-identified the proper NAICS code for which Government purchases of PPE normally fall under. Based on the NAICS manual, available at

www.census.gov/naics,

NAICS 315210 comprises firms that are commonly referred to as contractors that are primarily engaged in (1) cutting materials owned by others for apparel and accessories and/or (2) sewing materials owned by others for apparel and accessories. Normally, Federal Government purchases of PPE do not fall under this NAICS code as Government purchases of PPE are normally to acquire new materials and equipment, and not to modify materials and equipment already owned by the Federal Government. Instead, Government purchases of PPE usually fall under NAICS 339112 (Surgical and Medical Instrument Manufacturing), NAICS 339113 (Surgical Appliance and Supplies Manufacturing), or NAICS 423450 (Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers)

with Product Service Code (PSC) 6515 (Medical and Surgical Instruments, Equipment, and Supplies). Based on an analysis of FPDS-NG data for fiscal years 2018-2020, SBA found that less than 0.1 percent of Government purchases under PSC 6515 fall under NAICS 315210 while nearly 80 percent of Government purchases under PSC 6515 occur under one of the three aforementioned NAICS codes. Since PSC 6515 includes a broad range of supplies, SBA also analyzed the data by keywords to identify contracts for PPE, including respirators, masks, surgical gowns, and other PPE. SBA again found that NAICS 315210 was insignificant in terms of the total dollars obligated towards purchases of these PPE items. Thus, SBA does not agree that the industry's importance to Federal Government purchases of PPE warrants an increase to the size standard in NAICS 315210 in order to enable the industry to meet greater demand for PPE.

Per the requirements at 13 CFR 121.402(b)(2), acquisitions for supplies must be classified under the appropriate manufacturing or supply NAICS code, not under a Wholesale Trade or Retail Trade NAICS code, however, FPDS-NG data shows that some contracting activity may be misclassified under these NAICS codes.

Moreover, SBA's analysis of industry factors, as presented in Table 4 of the April 2022 proposed rule, supported a calculated size standard of only 450 employees for NAICS 315210. However, in response to the economic challenges presented by the COVID-19 pandemic and the measures taken by Federal Government to protect public health, SBA decided to adopt a policy to not lower size standards during the ongoing second five-year review of size standards in order to reduce the economic impacts to small businesses. Thus, SBA proposed to retain the current size standard for NAICS 315210 at 750 employees even though the data supported 450 employees. Based on the 2017 Economic Census data, 99.8 percent of firms are already small under the current 750-employee size standard for NAICS 315210. Increasing the size standard to 1,500 employees might include the largest and potentially dominant firms as small, which would run counter to the Small Business Act requirement that the size standards must exclude dominant firms from being qualified as small.

Regarding the industries that most accurately classify purchases of PPE, namely NAICS 339112 and NAICS 339113, SBA has proposed to retain the current size standard for NAICS 339112 at 1,000 employees and increase the size standard for NAICS 339113 to 800 employees based on the analysis of industry and Federal contracting factors. While the commenter submitted data on the costs of employment for firms operating under NAICS 315210 relative to other manufacturing industries, the provided data are not at the 6-digit industry level and do not demonstrate that SBA's analysis of NAICS 339112 and 339113 is insufficient. Thus, for the above reasons, SBA is not adopting the commenter's recommendation to increase the size standard for NAICS 315210 from 750 employees to 1,500 employees, nor is SBA adopting 1,500 employees as the size standard for other three NAICS codes under which solicitations for PPE are normally categorized.

Comments on the Exception to NAICS 562910 (Environmental Remediation Services)

As explained above in the Discussion of Comments section of this final rule, SBA received a total of 37 comments pertaining to SBA's proposal to increase the size standard for the Environmental Remediation Services (ERS) exception to NAICS 562910 from 750 employees to 1,000 employees. Of the 37 comments pertaining to the ERS exception, 28 (including six comments opposing SBA's proposal received during SBA's virtual public forums on size standards) opposed SBA's proposed increase and nine (including one comment supporting SBA's proposal during the virtual public forums) supported SBA's proposal. Below, SBA summarizes and responds to comments supporting the SBA's proposed change to the ERS size standard, then summarizes and responds to comments opposing the SBA's proposed change.

Comments Supporting SBA's Proposed Change to the ERS Exception

A total of nine comments were received supporting SBA's proposal to increase the size standard for the ERS exception from 750 employees to 1,000 employees. One commenter supporting SBA's proposed increase to the size standard argued that SBA's current 750-employee size standard is too restrictive and has been a detriment to many companies in the industry. The commenter expressed that adopting a 1,000-employee size standard would remove the restraint and allow for further growth for companies without forcing them to prematurely graduate from the small business status and to compete with larger firms with more resources when they exceed the size standard.

An additional four commenters, submitting nearly identical comments, supported SBA's proposed increase to the ERS size standard for similar reasons, expressing that SBA's proposed increase would allow additional firms to participate in Federal contracting as small businesses, increase small business competition, and ultimately reverse the downward trend in small business share of ERS contract dollars from fiscal years 2013 to 2018. These commenters further expressed that their business would benefit from SBA's proposed change due to the increased capabilities they could achieve under a larger size standard which would allow them to take on larger and more complex remediation projects. One

commenter also supported SBA's proposal based on the belief that the Federal Government will have access to an expanded pool of more capable small businesses to meet the demand for the surge in ERS requirements expected as part of the implementation of the Infrastructure Investment and Jobs Act (Pub. L. 117-58, November 15, 2021). Three commenters petitioned SBA to increase the size standard for the ERS exception to 1,200 employees based on SBA's analysis in the proposed rule which showed support for a size standard as high as 1,200 employees when including data from the largest firms whose principal business activities were generally unrelated to ERS.

Referring to an opposing comment received during SBA's virtual public forums on size standards that urged SBA to exclude the Department of Energy (DOE) contracts from its analysis of the ERS exception due to DOE's unique reliance on large M&O contractors, one commenter expressed that the notion of excluding such procurements, which are often related to nuclear remediation, is in direct contradiction to the definition of the ERS subindustry, as stated in Footnote 14 of SBA's Table of Size Standards at 13 CFR 121.201. The commenter explained that this footnote specifically lists nuclear remediation as an eligible activity and further argued that the justification for excluding DOE contracts from the analysis simply because they are dominated by large businesses is not sufficient. This commenter also opposed using the Engineering News-Record (ENR) top 200 environmental firms list as a source of industry data for evaluation of the ERS size standard as suggested by one commenter at the virtual public forums, because the data do not cover the whole industry and may contain subjective measures of revenue that do not comport with SBA's definitions.

SBA Response

SBA agrees with commenters supporting SBA's proposed increase to the size standard for the ERS exception that adopting a size standard of 1,000 employees would extend the runway for firms to grow while still allowing access to SBA's contracting and financial assistance programs. SBA also believes that increasing the size standard to 1,000 employees would improve competition in the industry and help small businesses to earn more Federal contracting dollars and compete for more complex environmental remediation projects, including those that may become newly available as a result of the Infrastructure Investment and Jobs Act.

As explained in the proposed rule, the procurement data analyzed by SBA showed that the dollars awarded by firms' employment size were concentrated among the largest firms. Specifically, small firms with less than or equal to 750 employees received about 37 percent of the total ERS dollar awards during fiscal years 2016-2018, while firms with more than 5,000 employees accounted for about 60 percent of the total ERS contract awards, with two firms alone accounting for almost 40 percent of the total awards under ERS activities. Firms between 750 employees and 5,000 employees accounted for 3.5 percent of the total ERS contract dollars. Procurement data from FPDS-NG for fiscal years 2019-2021 analyzed by SBA showed an increase in the small business share of ERS contract dollars to 43.5 percent and a decrease in the share of the largest firms (

i.e.,

those with more than 5,000 employees) to 54 percent, with two of them alone accounting for about 34 percent of total ERS dollars during that period. Firms between 750 employees and 5,000 employees accounted for remaining 2.5 percent. While the small business share of ERS contract dollars increased from about 37 percent during fiscal years 2016-2018 to about 43.5 percent during fiscal years 2019-2021, this is still smaller than the corresponding share of about 50 percent during fiscal years 2013-2015.

Thus, SBA believes that the large skewness in the distribution of ERS firms by the number of employees, the large percentage of ERS contracting dollars being concentrated among very large firms, a decrease in the small business share of total ERS awards compared with fiscal years 2013-2015, and the analysis of industry factors according to the SBA's Size Standards Methodology outlined in the proposed rule support SBA's proposal to increase the ERS size standard to 1,000 employees. SBA believes that its proposal to increase the size standard to 1,000 employees will further increase small business participation in the industry over time.

Regarding the adoption of a higher calculated size standard of 1,200 employees for the ERS industry, SBA does not believe that the calculated size standard of 1,200 employees accurately reflects the economic characteristics of firms primarily engaged in the business activities related to the ERS exception since this calculation was based on untrimmed data, and thus, included very large firms whose primary activity was likely unrelated to the ERS exception. Moreover, in response to comments pertaining to using the ENR data on the top 200 environmental firms, SBA agrees with commenters supporting SBA's increase to the ERS size standard that this dataset is not comprehensive enough for SBA's size standards purposes. For example, SBA's analysis of the ERS industry included 974 firms participating in Federal contracting under the exception to NAICS 562910 during fiscal years 2019-2021, while the ENR dataset suggested by the commenters only includes the top 200 environmental firms.

In order to reliably evaluate the size standard of any industry, SBA must rely on comprehensive data that is representative of the economic trends of the entire industry, rather than only the top firms.

974 is the number of firms after the removal of entities with null revenue and null number of employees as well as the identified Government entities and manufacturing firms. This number is the total entities participating in the ERS activity before trimming the data.

Comments Opposing SBA's Proposed Change to the ERS Exception

Of the 28 comments opposing SBA's proposed change to the size standard for the ERS exception, 27 comments expressed similar arguments for why SBA should retain the current 750-employee size standard for the ERS exception, including 21 comments submitted through the

regulations.gov

rulemaking portal, of which 20 were nearly identical, and six comments submitted orally through SBA's Virtual Public Forum on Size Standards. Many of these 27 commenters, including the 20 commenters that submitted nearly identical comments, and at least two commenters at SBA's Virtual Public Forum on Size Standards were part of a group of firms using data from FEDMINE, a business intelligence provider specializing in Federal Government contracting, as the basis for their comments. One commenter whose comment was also based on the FEDMINE report provided a list of 52 other firms that endorsed their comment. The remaining commenters that did not reference FEDMINE data provided similar reasons as those outlined by commenters using FEDMINE data for opposing SBA's proposed increase to the ERS size standard.

One commenter opposed to SBA's proposed size standard increase for the ERS exception raised issues other than those identified by the above 27 commenters, including establishing a separate NAICS industry specifically for munitions and unexploded ordnance

services. Below, SBA summarizes and responds to these opposing comments separately.

Comments Opposing SBA's Proposed Change to the ERS Exception for Similar Reasons

SBA received 27 comments petitioning SBA to retain the current 750-employee size standard for the ERS exception based on similar arguments, including six comments received during the virtual public forums on size standards and 21 comments received through the

www.regulations.gov

rulemaking portal of which 20 were almost identical. The commenters commissioned FEDMINE, a business intelligence provider specializing in Federal Government contracting, to prepare a report on their behalf regarding Federal spending under the ERS exception for fiscal years 2016-2021.

The commenters objected to SBA's proposed increase to the ERS size standard on the grounds that more recent data shows that SBA's calculation of the small business share of the Federal market under NAICS 562910 is understated, and therefore, undermines SBA's justification for increasing the size standard in order to help small businesses better compete for contracting opportunities. Specifically, according to the commenters' analysis, the amount of Federal dollars awarded to small businesses under the ERS exception increased nearly 50 percent, from about $1.4 billion in 2016 to about $2.1 billion in 2021. The commenters also provided data showing that the small business share of the ERS Federal spend increased from 35 percent in 2018 to 46 percent in 2021. The commenters argued that increasing the share of ERS Federal dollars obligated to small firms demonstrates, contrary to SBA's analysis, that the prior increase in the size standard for the exception from 500 employees to 750 employees was effective in increasing competition in the Federal market under the ERS exception (81 FR 4436 (January 26, 2016)). The commenters contended that SBA should evaluate data beyond fiscal year 2018 for purposes of analyzing the ERS exception because most Federal dollar obligations under the exception are awarded under indefinite delivery contracts (IDCs), and as such, SBA should recognize that there was a lapse of time between when the ERS size standard was increased in 2016 until IDCs were awarded and significant dollars were obligated to small businesses under the new size standard.

These commenters also maintained that the DOE's unique procurement methods, including the Agency's reliance on management and operating (M&O) contracts which are typically awarded to large firms, have a significant influence on SBA's calculations due to DOE's high proportion of total dollars obligated under the ERS exception. Thus, commenters urged SBA to exclude DOE contracts from the analysis since they do not accurately reflect market conditions outside of the DOE.

Regarding the influence of DOE's procurement trends on SBA's calculations, the commenters presented data showing the percent of DOE's ERS contracts dollars obligated to small businesses and the proportion of total ERS awards attributable to the DOE. The data submitted by commenters showed that for fiscal years 2016-2021, on average, DOE awarded only about seven percent of ERS contracting dollars to small businesses while comprising nearly 50 percent of total Federal ERS spending. The commenters maintained that unlike other Federal agencies, DOE awards nearly all ERS work through its M&O contractors, which are exclusively large businesses. For example, the commenters added, in fiscal year 2021, of the $1.2 billion that DOE awarded under the exception, only $3.2 million (0.3%) was awarded to non-M&O contracts. Subtracting the large business M&O dollars from the DOE's total ERS dollars, the commenters found that the small business share of total dollars was 97.8 percent. The commenters also argued that since most M&O contractors are joint ventures between two or more large businesses, each with employee counts far in excess of the SBA's size threshold, no reasonable increase in the ERS size standard would influence the ability of small businesses to compete at the prime level in the DOE M&O market and that the contracting dollars awarded to small business is not likely to increase simply because the number of businesses considered small under the exception has grown.

Regarding the dollars obligated to small businesses outside of DOE, the commenters presented data showing that since fiscal year 2016, the share of non-DOE ERS contract dollars awarded to small businesses increased from an average of 53 percent in fiscal years 2013-2015 to an average of 63 percent in fiscal years 2016-2018, and to an average of 78 percent in fiscal years 2019-2021.

Moreover, the commenters expressed concern with SBA's impact analysis which showed that two additional small businesses would gain access to small business set aside opportunities under the proposed 1,000-employee size standard for the ERS exception. Specifically, the commenters expressed that these newly eligible firms may adversely impact smaller small businesses competing for Federal contracts under the exception. The commenters argued that the addition of larger and more experienced firms may take away future opportunities from currently small firms that are adequately meeting small business procurement needs of Federal agencies.

During SBA's virtual public forums on size standards, SBA received comments expressing similar concerns as those outlined above regarding SBA's use of data from fiscal years 2016-2018 to measure small business participation in the Federal ERS market. One commenter also urged SBA to consider startup costs in its analysis of the industry size standard and utilize more recent data from the ENR, an industry trade publication, which describes the economic characteristics and primary business activities of the top 200 engineering/environmental firms in the industry down to the subsector level. Another commenter urged SBA to consider Environmental Protection Agency's (EPA) Region 2 Superfund program as a representation of the ERS industry. The commenter argued that these program data demonstrate the ability of small firms well under the current 750-employee size standard to fulfill the Federal Government's remediation requirements; thus, it is unnecessary for SBA to increase the size standard beyond the current threshold as the added competition from larger firms could impact the number of opportunities available for smaller small firms that are already thriving under the current size standard. Additional commenters at the virtual public forums agreed with the commenter's assertion that the current 750-employee size standard for the ERS exception is adequate.

For the above reasons, these commenters concluded that SBA's 2016 increase in the ERS size standard from 500 employees to 750 employees successfully increased small business participation in ERS contracts and preserved competition within the industry. As such, the commenters urged SBA to maintain the current 750-employee threshold instead of adopting 1,000 employees, as proposed.

SBA Response

SBA has reviewed the data provided by the above commenters and has determined that the results largely agree with the latest available data that SBA evaluated in response to the commenters' arguments, as we

discussed in the section

Comments Supporting SBA's Proposed Change to the ERS Exception

above. Moreover, consistent with the commenters, SBA found that DOE awards accounted for 49.2 percent of total dollars obligated under the ERS exception, of which only about 8.5 percent were awarded to small businesses through prime contracts.

However, although SBA's further analysis of the ERS industry confirmed some of the data submitted by commenters as presented above, SBA also found important differences in the commenter's position and SBA's evaluation, particularly in regards to SBA's evaluation of size standards generally and the proportion of dollars awarded by DOE under the exception through M&O contracts, a special class of contracts under which the Federal Government contracts for the operation, management, or support, on its behalf, of a government-owned or -controlled establishment devoted to one or more major government programs.

Regarding SBA's evaluation of size standards generally, in the proposed rule, SBA described its methodology for evaluating industry structure to derive size standards based on five primary factors including: average firm size (simple and weighted average firm size factors), startup costs and entry barriers (average assets size factor), industry competition (four-firm ratio factor), distribution of firms by size (Gini coefficient factor), and small business success in receiving Federal contracts under the current size standard (Federal contracting factor). As detailed in Table 4 of the April 2022 proposed rule, based on the data for fiscal years 2016-2018, SBA found that three of the five industry factors analyzed supported raising the size standard for the ERS industry above the current 750 employee threshold. Specifically, the factors for simple and weighted average firm size supported a size standard of 1,500 employees while the average assets size and Gini coefficient supported size standards of 850 employees and 1,250 employees, respectively. Only the four-firm ratio supported a size standard lower than 750 employees.

With respect to the Federal contracting factor, which measures small business participation in the Federal market in terms of the share of total Federal contract dollars awarded to small businesses relative to the small business share of an industry's total receipts, SBA found that the 750-employee size standard was appropriate. Based on SBA's Size Standards Methodology, if the share of Federal contract dollars awarded to small businesses in an industry is significantly smaller than the small business share of total industry's receipts, all else remaining the same, a justification would exist for considering a size standard higher than the current size standard. In cases, where small business share of the Federal market is already appreciably high relative to the small business share of the overall market, SBA generally assumes that the existing size standard is adequate with respect to the Federal contracting factor. Thus, regarding the ERS exception specifically, using the FPDS-NG data for fiscal years 2016-2018, SBA calculated a Federal contracting factor to be 64.2 percent, indicating the small business share of the Federal market is appreciably high relative to the small business share of industry receipts, which supported a size standard of 750 employees. Based on this result, SBA agrees with commenters that small businesses in the ERS industry are well-represented in the Federal contracting marketplace under the current 750-employee size standard and have adequate Federal contracting opportunities.

In the proposed rule, as an additional indicator, SBA also considered the change in the share of total ERS contract dollars awarded to small businesses from fiscal years 2013-2015 (under the 500-employee size standard) to fiscal years 2016-2018 (under the 750-employee size standard), finding that the small business share decreased from about 50 percent during fiscal years 2013-2015 to about 37 percent during fiscal years 2016-2018. This result, alongside SBA's analysis of industry factors demonstrated that an additional increase to the ERS size standard was warranted in order to optimize and protect the number of opportunities available to small businesses in the ERS industry. However, SBA notes that this additional indicator was not the primary basis for SBA's proposed increase to the size standard for the ERS exception. SBA's further analysis of data from fiscal years 2019-2021 showed that the small business share of total ERS contract dollars increased to 43.5 percent from 37 percent in fiscal years 2016-2018; however as previously stated, this is not a primary factor in SBA's comprehensive analysis of the ERS industry nor is it the sole basis for prescribing the size standard for the industry.

Based solely on the Federal contracting data, SBA agrees that the 750-employee size standard is appropriate for the ERS industry. However, while SBA believes that analyzing Federal contracting trends, including the Federal contracting factor, are an important component of SBA's evaluation of industry size standards, SBA's size standards methodology does not provide for the weighting of one factor more than others. In other words, the methodology establishes that SBA will give equal weights to all five primary factors that are considered in the evaluation of an industry size standard. Thus, SBA believes that the proposed size standard for the ERS industry, which is based on SBA's comprehensive evaluation of industry and Federal contracting factors, accurately reflects the economic characteristics of the industry, including the high level of small business participation in the Federal marketplace.

Regarding DOE's M&O contracts, SBA generally recognizes the special nature of M&O contracts which have received special regulatory treatment under Subpart 17.6 of the FAR. For example, when evaluating agency contracting performance under SBA's procurement scorecard assessment tool, starting from fiscal year 2015, SBA evaluates DOE's prime contracting performance by including M&O first tier subcontracts pursuant to 15 U.S.C. 644(g)(3). Thus, SBA believes commenters may be justified in requesting that SBA count DOE's M&O first tier subcontracts as prime contracts consistent with SBA's procurement scorecard methodology. However, SBA does not agree with commenters that the dollars obligated through DOE's M&O contracts should be excluded altogether from the evaluation of the industry size standard since M&O contracts are a valid and important part of the overall Federal contracting landscape, and because the DOE accounts for roughly half of total ERS contract dollars. SBA believes that excluding M&O contracts from the evaluation of size standards, particularly for purposes of calculating the Federal contracting factor, would lead to unreliable results in industries where M&O contracts are used prominently.

Moreover, SBA found that, contrary to the commenter's suggestion, it is not true that the majority of DOE contracts classified under the ERS exception are M&O contracts.

SBA obtained data from the DOE listing its M&O contractors and showing the proportion of total dollars awarded under the ERS exception to M&O contractors for fiscal years 2016-2021. The data showed that the DOE did not award any contracts

under the ERS exception to firms classified as an M&O contractor.

See Guidance on the Department of Energy Subcontracting Program,

Section 1.2 Background.

Based on data from the Electronic Subcontracting Reporting System (eSRS), SBA found that small businesses were well represented in DOE's first tier subcontracts classified under NAICS 562910. Specifically, SBA analyzed the data from fiscal years 2016-2021 and found that, when accounting for the dollars awarded to small businesses through first-tier subcontracts, about 57 percent of total dollars awarded by DOE under the ERS exception passed through to small businesses. Thus, even if SBA considered all DOE awards under the exception as M&O contracts and therefore counted the first-tier subcontracts as prime contracts, SBA believes that the evaluation would reflect a high degree of small business participation under the ERS exception, which, as explained above, is consistent with SBA's results under the proposed rule.

Nonetheless, in response to the commenters' petition, SBA conducted an analysis of the ERS industry using updated FPDS-NG data from fiscal years 2019-2021 following the same methodology as detailed in the proposed rule and in the SBA's Size Standards Methodology. SBA's analysis using the more recent data did not support a size standard lower than the SBA's proposed 1,000-employee size standard. In fact, except for the weighted average firm size, values of each industry factor based on the data for fiscal years 2019-2021 were higher than those based on the data for fiscal years 2016-2018. Although the weighted average firm size was lower in fiscal years 2016-2018, weighted average firm size still supported a 1,500-employee size standard. The Federal contracting factor based on the data for fiscal years 2019-2021 continued to support the 750-employee size standard.

Regarding petitions by commenters for SBA to use alternative sources of data to evaluate industry characteristics, specifically data from the ENR on the top 200 environmental firms and EPA's Region 2 Superfund program, SBA disagrees that these sources would provide the best representation of the ERS industry. SBA believes these data are not comprehensive enough for SBA's purposes. For example, SBA's analysis of the ERS industry included 974 firms participating in Federal contracting under the exception to NAICS 562910 during fiscal years 2019-2021, while the ENR dataset only includes the top 200 environmental firms. In order to reliably evaluate the size standard of any industry, SBA must rely on comprehensive data that is representative of the economic trends of the entire industry, rather than only the top firms, or those associated with one agency's contracting program.

SBA does not agree with the commenters that a few larger firms that would qualify as small under the proposed 1,000-employee size standard would have significant adverse impacts on small businesses under the current 750-employee size standard in terms of access to Federal opportunities to smaller small firms. The relevant data does not demonstrate that the previous increase in size standard from 500 employees to 750 employees had a significant adverse impact on small businesses below 500 employees in terms of accessing Federal small business opportunities. For example, firms below 500 employees accounted for 84 percent of total ERS dollars awarded to small businesses during fiscal years 2019-2021.

SBA believes that increasing the size standard to the proposed 1,000-employee level based on its comprehensive evaluation of industry and Federal contracting factors may increase the number of set-asides in this industry and further benefit the small firms that are already well-represented in the Federal contracting market at the current 750-employee size standard. SBA believes that increasing the size standard to 1,000 employees will expand the runway for small businesses to compete for more complex remediation projects while also ensuring that the Federal Government has access to a larger pool of qualified small businesses to select from when issuing solicitations for ERS. As such, based on SBA's evaluation of the above public comments pertaining to the ERS exception and SBA's analyses of industry and Federal contracting factors, SBA is adopting 1,000 employees as the size standard for ERS as proposed in the April 2022 proposed rule.

Comments Opposing SBA's Proposed Change to the ERS Exception for Other Reasons

One commenter opposing SBA's proposed increase to the size standard for the ERS exception from 750 employees to 1,000 employees argued that since SBA's analysis of Federal procurement data from fiscal years 2016-2018 in the proposed rule showed that the dollars obligated to small businesses decreased significantly despite an increase to the size standard from 500 employees to 750 employees in 2016, SBA should forego increasing the size standard again, and instead, pursue other methods of increasing small business participation. Specifically, the commenter petitioned SBA to task, demand, encourage and/or impose on Federal agencies higher small business participation goals. The commenter also argued that SBA's proposed size standard increase would adversely impact competition because currently small firms would find it difficult to compete with larger firms with more advanced capabilities. The commenter also urged SBA to implement rules and/or programs to support smaller firms within the ERS industry, for example, by creating a class of set-aside opportunities reserved for firms with fewer than 50 employees. The commenter also expressed concerns over what they viewed as discriminatory and inconsistent application of NAICS code selection by contracting officers when determining the applicable NAICS code for munitions response services, which are sometimes misclassified under the ERS exception rather than the general NAICS 562910 or some other more appropriate NAICS codes. The commenter maintained that while some munitions remediation projects may require engineers for planning purposes (

i.e.,

NAICS 541330) and geophysical survey and mapping services (

i.e.,

NAICS 541360), these services represent only a small portion of the contract dollars spent (usually 10-20%) on a munitions remediation project. The commenter further explained that the overwhelming majority of funds allocated to munitions remediation projects are spent on unexploded object (UXO) technicians and labor to remove and dispose of the UXOs. Thus, citing the requirements of ERS solicitations under Footnote 14, the commenter argued that, since greater than 50 percent of the work related to munitions remediation would be attributable to a single NAICS code, the requirements for classifying the solicitation under the ERS exception are not met. To remedy the misclassification of contracts for munitions remediation services, the commenter recommended that SBA create a separate NAICS code for munitions and UXO services and issue guidance to contracting officers on the appropriate use of the ERS exception.

SBA Response

SBA disagrees with the comment that SBA should forego increasing the size standard for the ERS exception and instead pursue other methods of increasing small business participation, including higher small business goals for Federal agencies and creating separate set-aside opportunities for smaller small firms. SBA believes that establishing appropriate size standards

for industries based on its Size Standards Methodology is not mutually exclusive to conducting other engagement efforts to increase small business participation.

Moreover, SBA believes that the aforementioned comment is largely beyond the scope of this rulemaking as the proposed rule did not propose any changes to SBA's goaling guidelines for Federal agencies, nor did SBA propose establishing a separate class of set-aside opportunities for smaller small businesses. By increasing the size standard for the ERS exception to 1,000 employees, SBA will extend the runway for firms to grow while also ensuring that small businesses retain access to SBA's contracting and financial assistance programs. Increasing the size standard to 1,000 employees will also improve competition in the industry and help small businesses to earn more Federal contracting dollars and compete for and perform more complex environmental remediation projects.

Regarding the misclassification of munitions remediation projects under the ERS exception rather than the general NAICS 562910, or some other more appropriate NAICS codes, SBA notes that it is ultimately the responsibility of the contracting officer to designate the proper NAICS code based on the principal purpose of the product or service being acquired (13 CFR 121.402(b)). SBA does not believe that changes to size standards, including the creation of new NAICS industries or exceptions, is an appropriate tool to address incorrect NAICS code selections by contracting officers. More importantly, SBA does not have authority to create new NAICS codes. SBA has established a process for affected parties to appeal with SBA's Office of Hearings and Appeal (OHA) a contracting officer's NAICS code designation in its regulations at 13 CFR 121.1101. SBA encourages impacted firms to use this process when they believe that a contracting officer has miscategorized a solicitation under an improper NAICS code.

For the reasons stated above, SBA is not adopting the recommendations of the commenter and is instead adopting 1,000 employees as the size standard for the ERS exception, as proposed in the proposed rule.

General Comments on SBA's Proposed Changes to Size Standards

SBA received four comments pertaining to its proposed changes to size standards generally, including one comment submitted orally as part of SBA's virtual public forum on size standards. Of the four comments received, two commenters supported SBA's proposed changes to size standards while two commenters opposed the SBA's proposal. One commenter supported SBA's increases to size standards, specifically for industries under NAICS Sector 54, but only for agencies other than the Department of Defense (DOD). The commenter expressed concern that complex compliance requirements and other factors make it too costly for small businesses to compete against larger established businesses and that increases in the size thresholds would only exacerbate this problem. The commenter did not specify which size levels would be more appropriate for the Sector 54 industries covered under this rule or offer data in support of their position. Another commenter supported SBA's proposed changes to size standards because they believed the changes would be beneficial to all small businesses, particularly to those involved in government contracting.

Regarding the opposing comments, one commenter expressed opposition to SBA's increases to size standards in general, specifically for dump truck operators due to the increased competition that small operators face from larger mid-sized trucking firms. The commenter also urged SBA to look into the commercial insurance industry which has, according to the commenter, more than doubled insurance rates over a timespan of just a few months. The commenter did not specify which NAICS codes were the subject of their comment, nor did they recommend any actions SBA should take to address their comment on the commercial insurance industry.

SBA also received one comment opposed to SBA's changes to size standards from a business operating under NAICS 561110 (Office Administrative Services). The commenter opposed any increases to size standards at this time, citing concerns about an impending economic recession, category management impacts, and best-in-class requirements which together reduce small business opportunities and the total number of small businesses. The commenter urged SBA to help small businesses facing these concerns by improving its engagement efforts through increased access to financial assistance and other support rather than increasing size standards.

SBA Response

SBA agrees with commenters supporting SBA's proposed changes to size standards that the proposed changes are beneficial to small businesses and will increase the number of Federal contracting opportunities available for small businesses. However, SBA disagrees with the comment supporting SBA's proposed changes in Sector 54, but only for agencies other than DOD. SBA does not believe that size standards should differ among Federal agencies based on the contracting preferences or requirements of each agency as this would result in a complicated regime of size standards that may fluctuate along with an agency's budget and priorities instead of the economic characteristics of the industry in which a firm operates. Moreover, to evaluate the size standards for industries within Sector 54, SBA relied on its size standards methodology. SBA's size standards methodology describes how its analyses of various industry and program factors are used to establish and revise size standards based on the latest data available. Thus, SBA believes that the size standards adopted in this final rule, including for industries within Sector 54, appropriately reflect the intended beneficiaries of SBA programs. Thus, SBA is adopting the size standards for industries in Sector 54 without change.

SBA also disagrees with the comment that expressed opposition to SBA's increases to size standards in general, but specifically for dump truck operators, urging SBA to take action to address increased insurance costs imposed by the commercial insurance industry. SBA believes that this comment is out of the scope of this rulemaking as dump truck operators normally operate under NAICS 484220 (Specialized Freight (except Used Goods) Trucking, Local), NAICS 532120 (Truck, Utility Trailer, and RV (Recreational Vehicle) Rental and Leasing), or NAICS 562119 (Other Waste Collection), all of which have receipts-based size standards and were not covered under the proposed rule. Moreover, SBA does not have the authority to regulate the commercial insurance industry, which operates mostly under industries with receipt-based size standards not covered under this rule. It is also unclear how an adjustment to size standards within the commercial insurance industry would translate to lower insurance premiums for small business owners. Thus, SBA is not adjusting the size standards for any industries in response to this comment.

SBA also disagrees with the comment opposing any increases to size standards based on various concerns including the broader economic environment and certain Federal contracting trends that are reducing opportunities for small businesses. SBA believes that all small

businesses will benefit under a size standard that is appropriate to their industry. SBA's changes to size standards help small businesses to remain competitive in the Federal market and ensure that SBA's services go to their intended beneficiaries. Moreover, Table 9 of this final rule, Impacts of Increasing Size Standards, below, demonstrates the benefits of size standards increases, which would remain unrealized if SBA were to not adopt any increases to size standards. For example, based on its impact analysis, SBA estimates that increasing size standards would result in additional contracting opportunities for more than 100 small businesses worth nearly $257 million. Thus, based on SBA's estimation of the positive net benefits accruing to small businesses as a result of the changes to size standards, SBA disagrees with the commenter that increases to size standards are harmful to small businesses. Therefore, SBA is adopting proposed increases to size standards as presented in the proposed rule.

Comments Pertaining to Other Issues

SBA received three comments pertaining to issues other than those already discussed above. One commenter, representing an optics manufacturer, in anticipation of SBA's adoption of Office of Management and Budget's (OMB) NAICS 2022 industry structure, petitioned SBA to adopt 1,000 employees as the size standard for NAICS 333310, which is a newly defined industry under NAICS 2022 encompassing elements from NAICS 333314, 333316, and 333318. The commenter argued that adopting the higher size standard would expand the runway for small businesses in this industry to compete against a greater number of large competitors with greater resources. Another commenter petitioned SBA to require all United States Department of Agriculture (USDA) regulated entities with current USDA certification status to be available for periodic surveys and questionnaires regarding their ability to spot, detect and report human trafficking. Another commenter petitioned SBA to reconsider the current minimum and maximum size threshold values for employee-based size standards. The commenter expressed concern with SBA's language in the proposed rule describing the minimum size standard as the size an established small business should be to have adequate capabilities and resources to be able to compete for and perform Federal contracts, but does not account for small businesses that are newly formed or just starting operations. The commenter maintained that, contrary to SBA's language, as small businesses adopt new technologies and innovation, it is possible to have adequate capabilities and resources to perform Federal contracts without a high employee count. Thus, the commenter urged SBA to explore measures such as financial statements, sales revenue, years in business and other applicable methods to determine capability and competency. The commenter also argued that SBA's minimum thresholds affect small business access to Federal procurement.

SBA Response

SBA agrees with the comment petitioning SBA to adopt 1,000 employees as the size standard for NAICS 333310 under the NAICS 2022 industry structure. On July 5, 2022, SBA published a proposed rule in the

Federal Register

with proposed revisions to size standards based on OMB's NAICS 2022 structure (87 FR 40034). In the proposed rule, SBA proposed 1,000 employees as the size standard for NAICS 333310 and adopted the proposed size standard in a final rule, effective October 1, 2022 (87 FR 59240; September 29, 2022). In this final rule, SBA is adopting changes to size standards based on the NAICS 2017 structure and applying the adopted changes to the recently adopted NAICS 2022 structure. SBA's NAICS adoption analysis, presented in this final rule under the section “Applying the Adopted Changes to the NAICS 2022 Structure,” supports adopting 1,000 employees as the size standard for NAICS 333310 based on SBA's established NAICS adoption methodology.

Regarding the comment petitioning SBA to establish reporting requirements for certain operators under USDA's regulations, SBA notes that it does not have authority to regulate the trucking industry, nor does the Agency have purview over any USDA's certification programs. Thus, SBA has determined that this comment is totally outside the scope of this final rule.

Regarding the comment petitioning SBA to reconsider the current minimum and maximum threshold values for employee-based size standards, SBA evaluated employee-based size standards under this rule using its “Size Standards Methodology” (Methodology), issued on April 11, 2019, and available at

www.sba.gov/size.

SBA's Methodology provides a detailed description of its analyses of various industry and program factors and data sources, and how the agency uses the results to establish and revise size standards. Prior to finalizing the revised Methodology, SBA issued a notification in the April 27, 2018, edition of the

Federal Register

notification of the issuance of the final revised Methodology (84 FR 14587).

Pursuant to the Methodology, SBA has established 250 employees and 1,500 employees, respectively, as the minimum and maximum size standard levels for Manufacturing and other industries (excluding Wholesale and Retail Trade) with employee-based size standards. Accordingly, SBA will not generally propose or adopt a size standard that is either below the minimum level or above the maximum, even though the calculations yield values below the minimum or above the maximum levels. As stated in the proposed rule, the minimum size standard reflects the size an established small business should be to have adequate capabilities and resources to be able to compete for and perform Federal contracts (but does not account for small businesses that are newly formed or just starting operations). On the other hand, the maximum size standard represents the level above which businesses, if qualified as small, would outcompete much smaller businesses when accessing Federal small business assistance. SBA notes that SBA's table of size standards at 13 CFR 121.201 only defines the largest a business can be and still be considered small. As such, although SBA uses 250 employees as the minimum size threshold for SBA's analysis of size standards, firms with less than 250 employees may still qualify as small businesses since they would be below the size threshold for their respective industry. Thus, SBA does not agree with the commenter that maintaining a minimum threshold for purposes of analysis of industry factors disadvantages small firms below the minimum threshold or excludes them from contracting opportunities. Moreover, SBA believes that this comment is likely beyond the scope of this rulemaking as the proposed rule did not propose any changes to SBA's Size Standards Methodology, which was finalized through notice and comment process in April 2019. SBA notes that the size standards reflect the maximum

size a business can be to be considered small.

Summary of Adopted Revisions to Size Standards

Based on the evaluation of public comments it received on the proposed rule and on its analyses of industry and Federal contracting factors using the latest available data when the proposed rule was prepared along with considerations of impacts of the ongoing COVID-19 pandemic, in this final rule, SBA is adopting the size standards as proposed in the April 26, 2022, proposed rule. Thus, SBA is increasing size standards for 150 industries under NAICS 2017, including 10 industries in NAICS Sector 21 (Mining, Quarrying, and Oil and Gas Extraction), 10 industries in NAICS Sector 22 (Utilities), 120 industries in NAICS Sector 31-33 (Manufacturing), five industries in Sector 48-49 (Transportation and Warehousing), three industries in NAICS Sector 51 (Information), and one subindustry (or “exception”) each in NAICS Sector 54 (Professional, Scientific and Technical Services) and in NAICS Sector 56 (Administrative and Support, Waste Management and Remediation Services). SBA's size standards revisions adopted in this rule can be found in Table 2, Adopted Size Standards Revisions (NAICS 2017). Also presented in Table 2 are current and calculated size standards for comparison.

Table 2—Adopted Size Standards Revisions

[NAICS 2017]

NAICS 2017 code

NAICS 2017 industry title

Current size

standard

(employees)

Calculated size

standard

(employees)

Proposed/

adopted size

standard

(employees)

212113

Anthracite Mining

250

600

250

212210

Iron Ore Mining

750

1,400

212222

Silver Ore Mining

250

1,100

250

212230

Copper, Nickel, Lead, and Zinc Mining

750

1,400

212291

Uranium-Radium-Vanadium Ore Mining

250

900

250

212299

All Other Metal Ore Mining

750

1,250

212313

Crushed and Broken Granite Mining and Quarrying

750

850

212319

Other Crushed and Broken Stone Mining and Quarrying

500

550

212322

Industrial Sand Mining

500

750

212324

Kaolin and Ball Clay Mining

750

1,050

750

212325

Clay and Ceramic and Refractory Minerals Mining

500

650

212391

Potash, Soda, and Borate Mineral Mining

750

1,050

212392

Phosphate Rock Mining

1,000

1,350

1,000

212393

Other Chemical and Fertilizer Mineral Mining

500

600

212399

All Other Nonmetallic Mineral Mining

500

600

221111

Hydroelectric Power Generation

500

750

221112

Fossil Fuel Electric Power Generation

750

950

221113

Nuclear Electric Power Generation

750

1,150

221114

Solar Electric Power Generation

250

700

500

221115

Wind Electric Power Generation

250

1,150

221116

Geothermal Electric Power Generation

250

1,050

250

221117

Biomass Electric Power Generation

250

550

221118

Other Electric Power Generation

250

650

221121

Electric Bulk Power Transmission and Control

500

950

221122

Electric Power Distribution

1,000

1,100

221210

Natural Gas Distribution

1,000

1,150

311111

Dog and Cat Food Manufacturing

1,000

1,250

311119

Other Animal Food Manufacturing

500

650

311211

Flour Milling

1,000

1,050

311212

Rice Milling

500

750

311213

Malt Manufacturing

500

900

500

311221

Wet Corn Milling

1,250

1,300

311224

Soybean and Other Oilseed Processing

1,000

1,250

311225

Fats and Oils Refining and Blending

1,000

1,100

311230

Breakfast Cereal Manufacturing

1,000

1,300

311313

Beet Sugar Manufacturing

750

1,150

311314

Cane Sugar Manufacturing

1,000

1,050

311411

Frozen Fruit, Juice, and Vegetable Manufacturing

1,000

1,100

311422

Specialty Canning

1,250

1,400

311511

Fluid Milk Manufacturing

1,000

1,150

311512

Creamery Butter Manufacturing

750

1,000

750

311514

Dry, Condensed, and Evaporated Dairy Product Manufacturing

750

1,000

311611

Animal (except Poultry) Slaughtering

1,000

1,150

311824

Dry Pasta, Dough, and Flour Mixes Manufacturing from Purchased Flour

750

850

311920

Coffee and Tea Manufacturing

750

1,000

311930

Flavoring Syrup and Concentrate Manufacturing

1,000

1,100

311941

Mayonnaise, Dressing, and Other Prepared Sauce Manufacturing

750

850

311942

Spice and Extract Manufacturing

500

650

311991

Perishable Prepared Food Manufacturing

500

700

311999

All Other Miscellaneous Food Manufacturing

500

700

312111

Soft Drink Manufacturing

1,250

1,400

312112

Bottled Water Manufacturing

1,000

1,100

312140

Distilleries

1,000

1,100

313220

Narrow Fabric Mills and Schiffli Machine Embroidery

500

550

313230

Nonwoven Fabric Mills

750

850

314999

All Other Miscellaneous Textile Product Mills

500

550

315190

Other Apparel Knitting Mills

750

850

315990

Apparel Accessories and Other Apparel Manufacturing

500

600

316110

Leather and Hide Tanning and Finishing

500

800

316992

Women's Handbag and Purse Manufacturing

750

850

750

321113

Sawmills

500

550

321114

Wood Preservation

500

550

321211

Hardwood Veneer and Plywood Manufacturing

500

600

322110

Pulp Mills

750

1,050

322122

Newsprint Mills

750

1,050

323111

Commercial Printing (except Screen and Books)

500

650

323120

Support Activities for Printing

500

550

324122

Asphalt Shingle and Coating Materials Manufacturing

750

1,100

324191

Petroleum Lubricating Oil and Grease Manufacturing

750

900

324199

All Other Petroleum and Coal Products Manufacturing

500

950

325110

Petrochemical Manufacturing

1,000

1,300

325120

Industrial Gas Manufacturing

1,000

1,200

325130

Synthetic Dye and Pigment Manufacturing

1,000

1,050

325220

Artificial and Synthetic Fibers and Filaments Manufacturing

1,000

1,050

325311

Nitrogenous Fertilizer Manufacturing

1,000

1,050

325312

Phosphatic Fertilizer Manufacturing

750

1,350

325314

Fertilizer (Mixing Only) Manufacturing

500

550

325320

Pesticide and Other Agricultural Chemical Manufacturing

1,000

1,150

325412

Pharmaceutical Preparation Manufacturing

1,250

1,300

325520

Adhesive Manufacturing

500

550

325611

Soap and Other Detergent Manufacturing

1,000

1,100

325612

Polish and Other Sanitation Good Manufacturing

750

900

325613

Surface Active Agent Manufacturing

750

1,100

325910

Printing Ink Manufacturing

500

750

325991

Custom Compounding of Purchased Resins

500

600

325998

All Other Miscellaneous Chemical Product and Preparation Manufacturing

500

650

326121

Unlaminated Plastics Profile Shape Manufacturing

500

600

326130

Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

500

650

326220

Rubber and Plastics Hoses and Belting Manufacturing

750

800

326299

All Other Rubber Product Manufacturing

500

650

327211

Flat Glass Manufacturing

1,000

1,100

327410

Lime Manufacturing

750

1,050

327910

Abrasive Product Manufacturing

750

900

327992

Ground or Treated Mineral and Earth Manufacturing

500

600

327999

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

500

750

331313

Alumina Refining and Primary Aluminum Production

1,000

1,300

331315

Aluminum Sheet, Plate, and Foil Manufacturing

1,250

1,400

331420

Copper Rolling, Drawing, Extruding, and Alloying

1,000

1,050

331491

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

750

900

331492

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

750

850

331512

Steel Investment Foundries

1,000

1,050

331513

Steel Foundries (except Investment)

500

700

331523

Nonferrous Metal Die-Casting Foundries

500

700

331524

Aluminum Foundries (except Die-Casting)

500

550

332112

Nonferrous Forging

750

950

332114

Custom Roll Forming

500

600

332117

Powder Metallurgy Part Manufacturing

500

550

332215

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

750

1,000

332439

Other Metal Container Manufacturing

500

600

332613

Spring Manufacturing

500

600

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

500

600

332812

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

500

600

332992

Small Arms Ammunition Manufacturing

1,250

1,300

332996

Fabricated Pipe and Pipe Fitting Manufacturing

500

550

333131

Mining Machinery and Equipment Manufacturing

500

900

333243

Sawmill, Woodworking, and Paper Machinery Manufacturing

500

550

333314

Optical Instrument and Lens Manufacturing

500

600

333924

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

750

900

333991

Power-Driven Hand Tool Manufacturing

500

950

333993

Packaging Machinery Manufacturing

500

600

333995

Fluid Power Cylinder and Actuator Manufacturing

750

800

333997

Scale and Balance Manufacturing

500

700

334290

Other Communications Equipment Manufacturing

750

800

334416

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

500

550

334511

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

1,250

1,350

334512

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

500

650

334514

Totalizing Fluid Meter and Counting Device Manufacturing

750

850

334517

Irradiation Apparatus Manufacturing

1,000

1,200

334519

Other Measuring and Controlling Device Manufacturing

500

600

335122

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

500

600

335129

Other Lighting Equipment Manufacturing

500

550

335311

Power, Distribution, and Specialty Transformer Manufacturing

750

800

335912

Primary Battery Manufacturing

1,000

1,300

335931

Current-Carrying Wiring Device Manufacturing

500

600

335991

Carbon and Graphite Product Manufacturing

750

900

335999

All Other Miscellaneous Electrical Equipment and Component Manufacturing

500

600

336310

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

1,000

1,050

336414

Guided Missile and Space Vehicle Manufacturing

1,250

1,300

336419

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

1,000

1,050

336611

Ship Building and Repairing

1,250

1,300

336991

Motorcycle, Bicycle, and Parts Manufacturing

1,000

1,050

337125

Household Furniture (except Wood and Metal) Manufacturing

750

950

337214

Office Furniture (except Wood) Manufacturing

1,000

1,100

339113

Surgical Appliance and Supplies Manufacturing

750

800

339910

Jewelry and Silverware Manufacturing

500

700

339930

Doll, Toy, and Game Manufacturing

500

700

339991

Gasket, Packing, and Sealing Device Manufacturing

500

600

339994

Broom, Brush, and Mop Manufacturing

500

750

339999

All Other Miscellaneous Manufacturing

500

550

483111

Deep Sea Freight Transportation

500

1,050

483113

Coastal and Great Lakes Freight Transportation

750

800

483114

Coastal and Great Lakes Passenger Transportation

500

550

483211

Inland Water Freight Transportation

750

1,050

483212

Inland Water Passenger Transportation

500

550

511199

All Other Publishers

500

550

512230

Music Publishers

750

900

512250

Record Production and Distribution

250

900

541715 (Exception 3)

Guided Missiles and Space Vehicles, Their Propulsion Units and Propulsion Parts

1,250

1,300

562910 (Exception

Environmental Remediation Services

750

1,000

Table 3, Summary of Adopted Size Standards Revisions by Sector (NAICS 2017), summarizes the adopted changes to size standards by NAICS sector.

Table 3—Summary of Adopted Size Standards Revisions by Sector

[NAICS 2017]

Sector

Sector name

Number of

size standards

reviewed

Number of

size standards

increased

Number of

size standards

decreased

Number of

size standards

maintained

Mining, Quarrying, and Oil and Gas Extraction

Utilities

31-33

Manufacturing

360

120

240

48-49

Transportation and Warehousing

Information

Professional, Scientific and Technical Services

Other Sectors

Agriculture, Forestry, Fishing and Hunting; Finance and Insurance; Administrative and Support, Waste Management and Remediation Services

Total

432

150

282

Applying the Adopted Changes to the NAICS 2022 Structure

Under this final rule, SBA has reviewed the size standards for 56 NAICS 2017 industries or their parts with employee-based size standards (excluding employee-based size standards in Sectors 42 and 44-45) and one industry with a receipts-based size standard that were split, merged, or modified to become part of 36 new industries under OMB's NAICS 2022 changes. Overall, OMB's NAICS 2022 revisions created 111 new industries by reclassifying, combining, or splitting 156 NAICS 2017 industries or their parts.

Complete information on the relationship between NAICS 2017 and NAICS 2022 is available on the U.S. Bureau of the Census (Census Bureau) website at

https://www.census.gov/naics/.

The Census Bureau's website also provides detailed documentation on Federal notices involving the replacement of SIC with NAICS, and all subsequent NAICS updates and revisions, including both the July 2, 2021, and December 21, 2021, Federal notices regarding the NAICS 2022 revision.

Prior to issuing this final rule on employee-based size standards, SBA incorporated OMB's NAICS 2022 changes into its Table of Size Standards at 13 CFR 121.201 in a final rule, effective October 1, 2022 (87 FR 59240; September 29, 2022), using the newly adopted size standards under SBA's review of size standards under the Jobs Act. Specifically, as stated above, as part of SBA's second five-year review of size standards under the Jobs Act, SBA revised all monetary-based size standards and employee-based size standards under NAICS Sectors 42 (Wholesale Trade) and 44-45 (Retail Trade).

Of the 36 new industries with employee-based size standards (excluding Sectors 42 and 44-45) that were created under the NAICS 2022 revision, 27 were formed by combining more than one NAICS 2017 industry or industry part, often with new 6-digit codes and industry titles. Three new industries were formed by changing the 6-digit code without changing the industry title, two industries were formed by changing the title without changing the 6-digit code, and four remaining industries had either their content, definition, or content changed, usually involving parts of NAICS 2017 industries.

SBA's methodology for incorporating OMB's NAICS revisions into size standards is generally well-established. On October 22, 1999, SBA proposed to replace the Standard Industrial Classification (SIC) System with NAICS 1997 as the basis of industry definitions for its table of small business size standards (64 FR 57188). The proposed rule included a set of guidelines or rules that SBA applied to convert the size standards for industries under SIC to industries under NAICS. The guidelines primarily aimed to minimize the impact of applying a new industry classification system on SBA's size standards and on small businesses that qualified as small under the SIC-based size standards. SBA received no negative comments against the proposed guidelines. Thus, SBA published its final rule on May 15, 2000 (65 FR 30386), corrected on September 5, 2000 (65 FR 53533), adopting the resulting table of size standards based on NAICS 1997 structure, as proposed. To be consistent, SBA generally applied the same guidelines when it updated its table of size standards to adopt NAICS 2002, NAICS 2007, NAICS 2012, NAICS 2017, and NAICS 2022 revisions. In those updates as well, SBA received no adverse comments against using those guidelines, or against the resulting changes to the size standards. These guidelines to adopt OMB's NAICS revisions were also included in the SBA's “Size Standards Methodology” white paper and SBA received no adverse comments when the revised methodology was open for public comments. The applicable guidelines are shown below in Table 4, “General Guidelines to Establish Size Standards for New Industries under NAICS 2022.”

Table 4—General Guidelines To Establish Size Standards for New Industries Under NAICS 2022

If the NAICS 2022 industry is composed of:

The size standard for the NAICS 2022 industry code will be:

1. A single NAICS 2012 industry or part of a single NAICS 2012 industry

The same size standard as for the NAICS 2012 industry or part.

2. Two or more NAICS 2017 industries; two or more parts of an NAICS 2017 industry; parts of two or more NAICS 2017 industries; or one or more NAICS 2017 industries and part(s) of one or more NAICS 2017 industries, and

2a. they all have the same size standard

The same size standard as for the NAICS 2017 industries or parts.

2b. they all have the same size measure (

e.g.,

receipts, employees,

etc.

) but do not all have the same size standard

The same size standard as for the NAICS 2017 industry or part that most closely matches the economic activity described by the NAICS 2022 industry, or

The highest size standard among the NAICS 2017 industries and part(s) that comprise the NAICS 2022 industry, provided that the highest size standard does not include dominant or potentially dominant firms.

2c. they have different size measures (

i.e.,

for example, some are based on receipts and others on employees) and hence do not all have the same size standard

The same size standard as for the NAICS 2017 industry or part that most closely matches the economic activity described by the NAICS 2022 industry, or

To apply this rule, SBA converts all size standards to a single measure (

e.g.,

receipts, employees,

etc.

) using the size measure for the NAICS 2017 industry or part(s) that most closely match the economic activity described by the NAICS 2022 industry or using the size measure that applies to most of the NAICS industries or parts comprising the NAICS 2022 industry.

Thus, in this final rule, SBA is incorporating the adopted size standards, as presented in Table 2 (above), into the table of size standards based on NAICS 2022 following the guidelines prescribed in Table 4 (above).

SBA identified 56 NAICS 2017 unique industries or their parts reviewed under this final rule that became part of 37 new industries under NAICS 2022. New size standards for the 37 new NAICS 2022 industries resulted in a reduction in size standard for eight industries under NAICS 2017, an increase to size standard for 12 industries and 2 parts of one industry, change in the size standard from employees to receipts for one industry, and no change in size standards for the remaining 35 NAICS 2017 industries or their parts. Among the 37 new industries under NAICS 2022 evaluated in this final rule, compared to the size standards adopted in the September 2022 NAICS 2022 adoption final rule, size standards increased for 10 industries and remained the same for the remaining 27 industries. Table 5, Size Standards for Industries Under NAICS 2017 Matched to NAICS 2022, below, presents these results.

Table 5—Size Standards for Industries Under NAICS 2017 Matched to NAICS 2022

NAICS 2022 code

NAICS 2022 industry title

Concordance with NAICS 2017 code

NAICS 2017 industry title (and specific piece of the NAICS 2017 industry that is contained in the NAICS 2022 industry)

NAICS 2017 standard prior to NAICS 2022 adoption

(employees or

$ million)

NAICS 2022 standard after NAICS 2022 adoption

(employees or

$ million)

NAICS 2017 standard adopted under this final rule

(employees)

NAICS 2022 standard under this final rule

(employees or

$ million)

212114

Surface Coal Mining

212111

Bituminous Coal and Lignite Surface Mining

1,250

1,250.

212113

Anthracite Mining—

Anthracite surface mining

250

212115

Underground Coal Mining

212112

Bituminous Coal Underground Mining

1,500

1,500.

212113

Anthracite Mining—

Anthracite underground mining

250

212220

Gold Ore and Silver Ore Mining

212221

212222

Gold Ore Mining

Silver Ore Mining

1,500

250

1,500

250

1,500.

212290

Other Metal Ore Mining

212291

Uranium-Radium-Vanadium Ore Mining

250

750

250

1,250.

212299

All Other Metal Ore Mining

750

1,250

212323

Kaolin, Clay, and Ceramic and Refractory Minerals Mining

212324

Kaolin and Ball Clay Mining

750

500

750

650.

212325

Clay and Ceramic and Refractory Minerals Mining

500

650

212390

Other Nonmetallic Mineral Mining and Quarrying

212391

Potash, Soda, and Borate Mineral Mining

750

500

1,050

600.

212392

Phosphate Rock Mining

1,000

212393

Other Chemical and Fertilizer Mineral Mining

500

600

212399

All Other Nonmetallic Mineral Mining

500

600

311221

Wet Corn Milling and Starch Manufacturing

311221

Wet Corn Milling

1,250

1,300

1,300.

315120

Apparel Knitting Mills

315110

Hosiery and Sock Mills

750

850.

315190

Other Apparel Knitting Mills

750

850

315250

Cut and Sew Apparel Manufacturing (except Contractors)

315220

Men's and Boys' Cut and Sew Apparel Manufacturing

750

750.

315240

Women's, Girls', and Infants' Cut and Sew Apparel Manufacturing

750

315280

Other Cut and Sew Apparel Manufacturing

750

316990

Other Leather and Allied Product Manufacturing

316992

Women's Handbag and Purse Manufacturing

750

500

750

500.

316998

All Other Leather Good and Allied Product Manufacturing

500

321215

Engineered Wood Member Manufacturing

321213

Engineered Wood Member (except Truss) Manufacturing

750

500

750

500.

321214

Truss Manufacturing

500

322120

Paper Mills

322121

Paper (except Newsprint) Mills

1,250

1,250.

322122

Newsprint Mills

750

1,050

325314

Fertilizer (Mixing Only) Manufacturing

325314

Fertilizer (Mixing Only) Manufacturing—

except compost manufacturing

500

550

550.

325315

Compost Manufacturing

325314

Fertilizer (Mixing Only) Manufacturing—

compost manufacturing

500

550

550.

325992

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

325992

Photographic Film, Paper, Plate, and Chemical Manufacturing

1,500

1,500.

333248

All Other Industrial Machinery Manufacturing

333244

Printing Machinery and Equipment Manufacturing

750

750.

333249

Other Industrial Machinery Manufacturing

500

333310

Commercial and Service Industry Machinery Manufacturing

333314

Optical Instrument and Lens Manufacturing

500

1,000

600

1,000.

333316

Photographic and Photocopying Equipment Manufacturing

1,000

333318

Other Commercial and Service Industry Machinery Manufacturing

1,000

333998

All Other Miscellaneous General Purpose Machinery Manufacturing

333997

Scale and Balance Manufacturing

500

700

700.

333999

All Other Miscellaneous General Purpose Machinery Manufacturing

500

334610

Manufacturing and Reproducing Magnetic and Optical Media

334613

Blank Magnetic and Optical Recording Media Manufacturing

1,000

1,250

1,000

1,250.

334614

Software and Other Prerecorded Compact Disc, Tape, and Record Reproducing

1,250

335131

Residential Electric Lighting Fixture Manufacturing

335121

Residential Electric Lighting Fixture Manufacturing

750

750.

335132

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

335122

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

500

600

600.

335139

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

335110

Electric Lamp Bulb and Part Manufacturing

1,250

1,250.

335129

Other Lighting Equipment Manufacturing

500

550

335910

Battery Manufacturing

335911

Storage Battery Manufacturing

1,250

1,250.

335912

Primary Battery Manufacturing

1,000

1,300

336110

Automobile and Light Duty Motor Vehicle Manufacturing

336111

Automobile Manufacturing

1,500

1,500.

336112

Light Truck and Utility Vehicle Manufacturing

1,500

337126

Household Furniture (except Wood and Upholstered) Manufacturing

337124

Metal Household Furniture Manufacturing

750

950.

337125

Household Furniture (except Wood and Metal) Manufacturing

750

950

513110

Newspaper Publishers

511110

Newspaper Publishers

1,000

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—

Internet newspaper publishers

1,000

513120

Periodical Publishers

511120

Periodical Publishers

1,000

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals

—Internet periodical publishers

1,000

513130

Book Publishers

511130

Book Publishers

1,000

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—

Internet book publishers

1,000

513140

Directory and Mailing List Publishers

511140

Directory and Mailing List Publishers

1,250

1,000

1,250

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—

Internet directory and mailing list publishers

1,000

513191

Greeting Card Publishers

511191

Greeting Card Publishers

1,500

1,000

1,500

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—

Internet greeting card publishers

1,000

513199

All Other Publishers

511199

All Other Publishers

500

1,000

550

1,000.

519130

Internet Publishing and Broadcasting and Web Search Portals—

All other Internet publishers

1,000

516210

Media Streaming Distribution Services, Social Networks, and Other Media Networks and Content Providers

515111

Radio Networks

$41.5 million

$41.5 million.

515120

Television Broadcasting—television networks

$41.5 million

515210

Cable and Other Subscription Programming

$41.5 million

519110

News Syndicates

$32.0 million

519130

Internet Publishing and Broadcasting and Web Search Portals—

Internet broadcasting

1,000

517111

Wired Telecommunications Carriers

517311

Wired Telecommunications Carriers

1,500

1,500.

517112

Wireless Telecommunications Carriers (except Satellite)

517312

Wireless Telecommunications Carriers (except Satellite)—

Except agents for wireless telecommunications carriers

1,500

1,500.

517121

Telecommunications Resellers

517911

Telecommunications Resellers—

Except agents for wireless telecommunications resellers

1,500

1,500.

517122

Agents for Wireless Telecommunications Services

517312

Wireless Telecommunications Carriers (except Satellite)—

Agents for wireless telecommunications carriers

1,500

1,500.

517911

Telecommunications Resellers—

Agents for wireless telecommunications resellers

1,500

519290

Web Search Portals and All Other Information Services

519130

Internet Publishing and Broadcasting and Web Search Portals—

Web search portals

1,000

1,000.

519190

All Other Information Services

$30.0 million

By combining the results of Table 2 and Table 5 (above), in Table 6 (below), Adopted Size Standard Revisions (NAICS 2022), SBA presents revisions to size standards resulting from the incorporation of the adopted size standards into the NAICS 2022 structure.

Table 6—Adopted Size Standards Revisions

[NAICS 2022]

2022 NAICS Code

NAICS 2022 industry title

Current size standards

(employees)

Adopted size standards

(employees)

212210

Iron Ore Mining

750

1,400

212230

Copper, Nickel, Lead, and Zinc Mining

750

1,400

212290

Other Metal Ore Mining

750

1,250

212313

Crushed and Broken Granite Mining and Quarrying

750

850

212319

Other Crushed and Broken Stone Mining and Quarrying

500

550

212322

Industrial Sand Mining

500

750

212323

Kaolin, Clay, and Ceramic and Refractory Minerals Mining

500

650

212390

Other Nonmetallic Mineral Mining and Quarrying

500

600

221111

Hydroelectric Power Generation

500

750

221112

Fossil Fuel Electric Power Generation

750

950

221113

Nuclear Electric Power Generation

750

1,150

221114

Solar Electric Power Generation

250

500

221115

Wind Electric Power Generation

250

1,150

221117

Biomass Electric Power Generation

250

550

221118

Other Electric Power Generation

250

650

221121

Electric Bulk Power Transmission and Control

500

950

221122

Electric Power Distribution

1,000

1,100

221210

Natural Gas Distribution

1,000

1,150

311111

Dog and Cat Food Manufacturing

1,000

1,250

311119

Other Animal Food Manufacturing

500

650

311211

Flour Milling

1,000

1,050

311212

Rice Milling

500

750

311221

Wet Corn Milling and Starch Manufacturing

1,250

1,300

311224

Soybean and Other Oilseed Processing

1,000

1,250

311225

Fats and Oils Refining and Blending

1,000

1,100

311230

Breakfast Cereal Manufacturing

1,000

1,300

311313

Beet Sugar Manufacturing

750

1,150

311314

Cane Sugar Manufacturing

1,000

1,050

311411

Frozen Fruit, Juice, and Vegetable Manufacturing

1,000

1,100

311422

Specialty Canning

1,250

1,400

311511

Fluid Milk Manufacturing

1,000

1,150

311514

Dry, Condensed, and Evaporated Dairy Product Manufacturing

750

1,000

311611

Animal (except Poultry) Slaughtering

1,000

1,150

311824

Dry Pasta, Dough, and Flour Mixes Manufacturing from Purchased Flour

750

850

311920

Coffee and Tea Manufacturing

750

1,000

311930

Flavoring Syrup and Concentrate Manufacturing

1,000

1,100

311941

Mayonnaise, Dressing, and Other Prepared Sauce Manufacturing

750

850

311942

Spice and Extract Manufacturing

500

650

311991

Perishable Prepared Food Manufacturing

500

700

311999

All Other Miscellaneous Food Manufacturing

500

700

312111

Soft Drink Manufacturing

1,250

1,400

312112

Bottled Water Manufacturing

1,000

1,100

312140

Distilleries

1,000

1,100

313220

Narrow Fabric Mills and Schiffli Machine Embroidery

500

550

313230

Nonwoven Fabric Mills

750

850

314999

All Other Miscellaneous Textile Product Mills

500

550

315120

Apparel Knitting Mills

750

850

315990

Apparel Accessories and Other Apparel Manufacturing

500

600

316110

Leather and Hide Tanning and Finishing

500

800

321113

Sawmills

500

550

321114

Wood Preservation

500

550

321211

Hardwood Veneer and Plywood Manufacturing

500

600

322110

Pulp Mills

750

1,050

323111

Commercial Printing (except Screen and Books)

500

650

323120

Support Activities for Printing

500

550

324122

Asphalt Shingle and Coating Materials Manufacturing

750

1,100

324191

Petroleum Lubricating Oil and Grease Manufacturing

750

900

324199

All Other Petroleum and Coal Products Manufacturing

500

950

325110

Petrochemical Manufacturing

1,000

1,300

325120

Industrial Gas Manufacturing

1,000

1,200

325130

Synthetic Dye and Pigment Manufacturing

1,000

1,050

325220

Artificial and Synthetic Fibers and Filaments Manufacturing

1,000

1,050

325311

Nitrogenous Fertilizer Manufacturing

1,000

1,050

325312

Phosphatic Fertilizer Manufacturing

750

1,350

325314

Fertilizer (Mixing Only) Manufacturing

500

550

325315

Compost Manufacturing

500

550

325320

Pesticide and Other Agricultural Chemical Manufacturing

1,000

1,150

325412

Pharmaceutical Preparation Manufacturing

1,250

1,300

325520

Adhesive Manufacturing

500

550

325611

Soap and Other Detergent Manufacturing

1,000

1,100

325612

Polish and Other Sanitation Good Manufacturing

750

900

325613

Surface Active Agent Manufacturing

750

1,100

325910

Printing Ink Manufacturing

500

750

325991

Custom Compounding of Purchased Resins

500

600

325998

All Other Miscellaneous Chemical Product and Preparation Manufacturing

500

650

326121

Unlaminated Plastics Profile Shape Manufacturing

500

600

326130

Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

500

650

326220

Rubber and Plastics Hoses and Belting Manufacturing

750

800

326299

All Other Rubber Product Manufacturing

500

650

327211

Flat Glass Manufacturing

1,000

1,100

327410

Lime Manufacturing

750

1,050

327910

Abrasive Product Manufacturing

750

900

327992

Ground or Treated Mineral and Earth Manufacturing

500

600

327999

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

500

750

331313

Alumina Refining and Primary Aluminum Production

1,000

1,300

331315

Aluminum Sheet, Plate, and Foil Manufacturing

1,250

1,400

331420

Copper Rolling, Drawing, Extruding, and Alloying

1,000

1,050

331491

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

750

900

331492

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

750

850

331512

Steel Investment Foundries

1,000

1,050

331513

Steel Foundries (except Investment)

500

700

331523

Nonferrous Metal Die-Casting Foundries

500

700

331524

Aluminum Foundries (except Die-Casting)

500

550

332112

Nonferrous Forging

750

950

332114

Custom Roll Forming

500

600

332117

Powder Metallurgy Part Manufacturing

500

550

332215

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

750

1,000

332439

Other Metal Container Manufacturing

500

600

332613

Spring Manufacturing

500

600

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

500

600

332812

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

500

600

332992

Small Arms Ammunition Manufacturing

1,250

1,300

332996

Fabricated Pipe and Pipe Fitting Manufacturing

500

550

333131

Mining Machinery and Equipment Manufacturing

500

900

333243

Sawmill, Woodworking, and Paper Machinery Manufacturing

500

550

333924

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

750

900

333991

Power-Driven Hand Tool Manufacturing

500

950

333993

Packaging Machinery Manufacturing

500

600

333995

Fluid Power Cylinder and Actuator Manufacturing

750

800

333998

All Other Miscellaneous General Purpose Machinery Manufacturing

500

700

334290

Other Communications Equipment Manufacturing

750

800

334416

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

500

550

334511

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

1,250

1,350

334512

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

500

650

334514

Totalizing Fluid Meter and Counting Device Manufacturing

750

850

334517

Irradiation Apparatus Manufacturing

1,000

1,200

334519

Other Measuring and Controlling Device Manufacturing

500

600

335132

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

500

600

335311

Power, Distribution, and Specialty Transformer Manufacturing

750

800

335931

Current-Carrying Wiring Device Manufacturing

500

600

335991

Carbon and Graphite Product Manufacturing

750

900

335999

All Other Miscellaneous Electrical Equipment and Component Manufacturing

500

600

336310

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

1,000

1,050

336414

Guided Missile and Space Vehicle Manufacturing

1,250

1,300

336419

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

1,000

1,050

336611

Ship Building and Repairing

1,250

1,300

336991

Motorcycle, Bicycle, and Parts Manufacturing

1,000

1,050

337126

Household Furniture (except Wood and Upholstered) Manufacturing

750

950

337214

Office Furniture (except Wood) Manufacturing

1,000

1,100

339113

Surgical Appliance and Supplies Manufacturing

750

800

339910

Jewelry and Silverware Manufacturing

500

700

339930

Doll, Toy, and Game Manufacturing

500

700

339991

Gasket, Packing, and Sealing Device Manufacturing

500

600

339994

Broom, Brush, and Mop Manufacturing

500

750

339999

All Other Miscellaneous Manufacturing

500

550

483111

Deep Sea Freight Transportation

500

1,050

483113

Coastal and Great Lakes Freight Transportation

750

800

483114

Coastal and Great Lakes Passenger Transportation

500

550

483211

Inland Water Freight Transportation

750

1,050

483212

Inland Water Passenger Transportation

500

550

512230

Music Publishers

750

900

512250

Record Production and Distribution

250

900

541715 (Exception 3)

Guided Missiles and Space Vehicles, Their Propulsion Units and Propulsion Parts

1,250

1,300

562910 (Exception)

Environmental Remediation Services

750

1,000

Table 7, Summary of Adopted Size Standards Revisions by Sector (NAICS 2022), summarizes the adopted changes to size standards in this final rule by NAICS sector. Accordingly, of 412 NAICS 2022 employee-based size standards reviewed in this rule, SBA is increasing 144, including 117 in Sector 31-33, ten in Sector 22, eight in Sector 21, five in Sector 48-49, two in Sector 51, and one each in Sector 54 and Sector 56. SBA is retaining the remaining 268 employee-based size standards in those sectors, including 204 size standards that would decrease based on analytical results. In the April 2022 proposed rule as well as other rulemakings as part of the second five-year review of size standards, in response to the impact of the COVID-19 pandemic, SBA maintained current size standards where the analytical results supported decreases. SBA is also retaining the remaining 64 size standards for which the results suggested no changes.

Table 7—Summary of Adopted Size Standards Revisions by Sector

[NAICS 2022]

NAICS sector

Sector name

Number of size standards reviewed

Number of size standards increased

Number of size standards decreased

Number of size standards maintained

Mining, Quarrying, and Oil and Gas Extraction

Utilities

31-33

Manufacturing

346

117

229

48-49

Transportation and Warehousing

Information

Professional, Scientific and Technical Services

Other Sectors

Agriculture, Forestry, Fishing and Hunting; Finance and Insurance; Administrative and Support, Waste Management and Remediation Services

Total

412

144

268

Evaluation of Dominance in Field of Operation

SBA determined that for the industries evaluated under this final rule, no individual firm at or below the revised size standards in Table 6 (above) would be large enough to dominate its field of operation. At the size standard levels adopted in this final rule, based on 2017 Economic Census, an individual firm's share of total industry receipts among those industries would be, on average, 2.3 percent, varying from 0.1 percent to 21.4 percent. Generally, SBA believes the shares below 40 percent would preclude dominant firms from qualifying as small and exerting control on any industry. Thus, the above market shares effectively preclude a firm at or below the revised size standards from exerting control on any of the industries.

Alternatives Considered

In response to the unprecedented economic impacts of the COVID-19 pandemic on small businesses and government response, SBA is adopting increases to size standards where the data suggests increases are warranted; and retaining all current size standards where the data suggested lowering is appropriate. SBA is also retaining all current size standards where the data suggested no changes to the current size standards.

Nonetheless, SBA considered two other alternatives. Alternative Option One was to adopt changes to size standards exactly as suggested by the analytical results. In other words, Alternative Option One would entail increasing size standards for 144 industries or subindustries, decreasing size standards for 204 industries or subindustries, and retaining size standards at their current levels for 64 industries or subindustries. Alternative Option Two was to retain all current size standards.

SBA is not adopting Alternative Option One because it would cause a substantial number of currently small businesses to lose their small business status and hence to lose their access to Federal small business assistance, especially small business set-aside contracts and SBA's financial assistance in some cases. Impacts of lowering size standards under Alternative Option One are discussed in detail in the Regulatory Impact Analysis section of this rule. Lowering size standards in the current environment would also run counter to various measures the Federal Government has implemented to help small businesses and the overall economy recover from the ongoing COVID-19 pandemic. Given the effects of the 2007-2009 Great Recession, and the resulting government actions to support small businesses and the overall economy, SBA also adopted a policy of not decreasing size standards during the first five-year review of size standards, even though the data supported decreases.

Under Alternative Option Two, given the current COVID-19 pandemic, SBA considered retaining the current levels of all size standards even though the analysis of relevant data suggested changing them. Under this option, as the current situation develops, SBA will be able to assess new data available on economic indicators, Federal procurement, and SBA loans before adopting changes to size standards. However, SBA is not adopting Alternative Option Two because results discussed in the Regulatory Impact Analysis section, below, show that retaining all size standards at their current levels would cause otherwise qualified small businesses to forgo various small business benefits becoming available to them under the option of increasing 144 and retaining 268 employee-based size standards. Such benefits would include access to Federal contracts set aside for small businesses and capital through SBA's loan and SBIC programs, and exemptions from paperwork and other compliance requirements.

Federal Procurement Size Standard for Nonmanufacturers

In the April 2022 proposed rule, SBA proposed to maintain the 500-employee size standard for nonmanufacturers. Based on the evaluation of public comments pertaining to SBA's proposed size standard, its analyses of industry factors using the latest available data when the proposed rule was prepared, and SBA's considerations of other factors outlined in the proposed rule as well as public comments discussed above, in this final rule, SBA is adopting 500 employees as the size standard applicable to nonmanufacturers under 13 CFR 121.406 as proposed in the April 26, 2022, proposed rule.

Compliance With Executive Orders 12866, the Congressional Review Act (5 U.S.C. 801-808), the Regulatory Flexibility Act (5 U.S.C. 601-612), Executive Orders 13563, 12988, and 13132, and the Paperwork Reduction Act (44 U.S.C. Ch. 35)

Executive Order 12866

The Office of Management and Budget (OMB) has determined that this final rule is a significant regulatory action for purposes of Executive Order 12866. Accordingly, in the next section SBA provides a Regulatory Impact Analysis of this final rule, including (1) A statement of the need for the regulatory action, (2) An examination of alternative regulatory approaches, and (3) An estimate of the benefits and costs—both quantitative and qualitative—of the regulatory action and the alternatives considered.

Regulatory Impact Analysis

1. What is the need for this regulatory action?

SBA's mission is to aid and assist small businesses through a variety of financial, procurement, business development and counseling, and disaster assistance programs. To determine the actual intended beneficiaries of these programs, SBA establishes numerical size standards by industry to identify businesses that are deemed small. Under the Small Business Act (Act) (15 U.S.C. 632(a)), SBA's Administrator is responsible for establishing small business size definitions (or “size standards”) and ensuring that such definitions vary from industry to industry to reflect differences among various industries. The Jobs Act requires SBA to review every five years all size standards and make necessary adjustments to reflect current industry and Federal market conditions. This final rule is part of the second five-year review of size standards in accordance with the Jobs Act. The first five-year review of size standards was completed in early 2016. Such periodic reviews of size standards provide SBA with an opportunity to incorporate ongoing changes to industry structure and Federal market environment into size standards and to evaluate the impacts of prior revisions to size standards on small businesses. This also provides SBA with an opportunity to seek and incorporate public input to the size standards review and analysis. SBA believes that the size standards revisions adopted for industries being reviewed in this final rule will make size standards more reflective of the current economic characteristics of businesses in those industries and the latest trends in Federal marketplace.

The revisions to the existing size standards for 144 industries or subindustries (or “exceptions”), including 117 industries in Sector 31-33 and 27 industries and subindustries in other sectors are consistent with SBA's statutory mandate to help small businesses grow and create jobs and to review and adjust size standards every five years. This regulatory action

promotes the Administration's goals and objectives as well as meets the SBA's statutory responsibility. One of SBA's goals in support of promoting the Administration's objectives is to help small businesses succeed through fair and equitable access to capital and credit, Federal Government contracts and purchases, and management and technical assistance. Reviewing and modifying size standards, when appropriate, ensures that intended beneficiaries are able to access Federal small business programs that are designed to assist them to become competitive and create jobs.

2. What are the potential benefits and costs of this regulatory action?

OMB directs agencies to establish an appropriate baseline to evaluate any benefits, costs, or transfer impacts of regulatory actions and alternative approaches considered. The baseline should represent the agency's best assessment of what the world would look like absent the regulatory action. For a new regulatory action promulgating modifications to an existing regulation (such as modifying the existing size standards), a baseline assuming no change to the regulation (

i.e.,

making no changes to current size standards) generally provides an appropriate benchmark for evaluating benefits, costs, or transfer impacts of regulatory changes and their alternatives.

Changes to Size Standards

Based on the results from the analyses of the latest industry and Federal contracting data, evaluation of the public comments on the proposed rule, as well as consideration of the impact of size standards changes on small businesses and significant adverse impacts of the COVID-19 emergency on small businesses and the overall economic activity, of the total of 412 industries and subindustries (or “exceptions”) in Sector 31-33 and other sectors that have employee-based size standards, SBA increases size standards for 144 industries or subindustries (“exceptions”) and maintain current size standards for the remaining 268 industries or subindustries (“exceptions”).

The Baseline

For purposes of this regulatory action, the baseline represents maintaining the “status quo,”

i.e.,

making no changes to the current size standards. Using the number of small businesses and levels of benefits (such as set-aside contracts, SBA's loans, disaster assistance, etc.) they receive under the current size standards as a baseline, one can examine the potential benefits, costs, and transfer impacts of changes to size standards on small businesses and on the overall economy.

Based on the 2017 Economic Census, of a total of about 333,213 businesses in industries in Sectors 31-33 and other sectors with employee-based size standards, 96.8 percent are considered small under the current size standards. That percentage varies from 88.0 percent in NAICS Sector 22 to 99.8 percent in Sector 11. Based on the data from FPDS-NG for fiscal years 2018-2020, about 41,838 unique firms in those industries received at least one Federal contract during that period, of which 84.3 percent were small under the current size standards. A total of $231.6 billion in average annual contract dollars were awarded to businesses in those industries during the period of evaluation, and 18.6 percent of the dollars awarded went to small businesses. For industries and subindustries (“exceptions”) reviewed in this final rule, providing contract dollars to small business through set-asides is quite important. From the total small business contract dollars awarded during the period considered, 47.1 percent were awarded through various small business set-aside programs and 52.9 percent were awarded through non-set aside contracts. Based on the SBA's internal data on its loan programs for fiscal years 2018-2020, small businesses in those industries received, on an annual basis, a total of 4,877 7(a) and 504 loans in that period, totaling about $3.1 billion, of which 75.8 percent was issued through the 7(a) program and 24.2 percent was issued through the 504/CDC program. During fiscal years 2018-2020, small businesses in those industries also received 255 loans through the SBA's Economic Injury Disaster Loan (EIDL) program, totaling about $11.4 million on an annual basis.

Table 8, Baseline for All Industries (NAICS 2022), below, provides these baseline results for Manufacturing (Sector 31-33) and all other sectors.

The analysis of the disaster loan data excludes physical disaster loans that are available to anyone regardless of size, disaster loans issued to nonprofit entities, and EIDLs issued under the COVID-19 relief program. Effective January 1, 2022, SBA stopped accepting applications for new COVID EIDL loans or advances. Thus, the disaster loan analysis presented here pertains to the regular EIDL loans only.

SBA estimates impacts of size standards changes on EIDL loans by calculating the ratio of businesses getting EIDL loans to total small businesses (based on the Economic Census data) and multiplying it by the number of impacted small firms. Due to data limitations, for FY 2019-20, some loans with both physical and EIDL loan components could not be broken into the physical and EIDL loan amounts. In such cases, SBA applied the ratio of EIDL amount to total (physical loan + EIDL) amount using FY 2016-18 data to the FY 2019-20 data to obtain the amount attributable to the EIDL loans.

Table 8—Baseline for All Industries

[NAICS 2022]

Sector 31-33

Other sectors

Total

Number of industries or subindustries (“exceptions”) reviewed in this proposed rule

346

412

Total firms in industries reviewed in this proposed rule (2017 Economic Census)

259,377

73,836

333,213

Total small firms in those industries under current size standards (2017 Economic Census

250,804

71,813

322,617

Small firms as % of total firms (2017 Economic Census)

96.7%

97.3%

96.8%

Total contract dollars ($ million) (FPDS-NG FY 2018-2020)

$181,818

$49,758

$231,576

Total small business contract dollars under current standards ($ million) (FPDS-NG FY2018-2020)

$28,713

$14,364

$43,078

Small business dollars as % of total dollars (FPDS-NG FY 2018-2020)

15.8%

28.9%

18.6%

Total number of unique firms getting federal contracts (FPDS-NG FY 2018-2020)

34,225

9,312

41,838

Total number of unique small firms getting small business contracts (FPDS-NG FY 2018-2020)

29,056

7,291

35,268

Small firms getting federal contracts as % of total firms getting federal contracts (FPDS-NG FY 2018-2020)

84.9%

78.3%

84.3%

Number of 7(a) and CDC/504 loans (FY 2018-2020)

4,362

515

4,877

Amount of 7(a) and CDC/504 loans ($ million) (FY 2018-2020)

$2,863

$248

$3,111

Number of EIDL loans (FY 2018-2020)

202

255

Amount of EIDL loans ($million) (FY 2018-2020)

$8.3

$3.1

$11.4

These figures do not include two 6-digit NAICS industries and 5 subindustries or “exceptions” for which Economic Census data is not available.

Excludes COVID-19 related EIDL loans due to their temporary nature. Effective January 1, 2022, SBA stopped accepting applications for new COVID EIDL loans or advances.

Increases to Size Standards

As stated above, in terms of NAICS 2022, of 412 employee-based size standards in Sectors 31-33 and other sectors that are reviewed in this rule, based on the results from analyses of latest industry and Federal market data as well as impacts of size standards changes on small businesses and considerations for the impacts from the COVID-19 pandemic, SBA increases 144 size standards, including 117 in Sector 31-33 and 27 in other sectors. Below are descriptions of the benefits, costs, and transfer impacts of these increases to size standards.

Benefits of Increases to Size Standards

The most significant benefit to businesses from increases to size standards is gaining eligibility for Federal small business assistance programs or retaining that eligibility for a longer period. These include SBA's business loan programs, EIDL program, and Federal procurement programs intended for small businesses. Federal procurement programs provide targeted, set-aside opportunities for small businesses under SBA's various business development and contracting programs. These include the 8(a)/Business Development (BD) Program, the Historically Underutilized Business Zones (HUBZone) Program, the Women-Owned Small Businesses (WOSB) Program, the Economically Disadvantaged Women-Owned Small Businesses (EDWOSB) Program, and the Service-Disabled Veteran-Owned Small Businesses (SDVOSB) Program.

Besides set-aside contracting and financial assistance discussed above, small businesses also benefit through reduced fees, less paperwork, and fewer compliance requirements that are available to small businesses through the Federal Government programs. However, SBA has no data to estimate the number of small businesses receiving such benefits.

Based on the 2017 Economic Census, SBA estimates that in 144 industries or subindustries (“exceptions”) in NAICS Sector 31-33 and other sectors with employee-based size standards for which it is increasing size standards, 242 firms (see Table 9, Impacts of Increasing Size Standards, below), not small under the current size standards, will become small under the adopted size standards increases and therefore become eligible for these programs. That represents about 0.3 percent of all firms classified as small under the current size standards in industries for which SBA is adopting increases to size standards. SBA's revised size standards would result in an increase to the small business share of total receipts in those industries from 27.4 percent to 29.3 percent.

With more businesses qualifying as small under the adopted increases to size standards, Federal agencies will have a larger pool of small businesses from which to draw for their small business procurement programs. Growing small businesses that are close to exceeding the current size standards will be able to retain their small business status for a longer period under the higher size standards, thereby enabling them to continue to benefit from the small business programs.

Based on the FPDS-NG data for fiscal years 2018-2020, SBA estimates that 109 firms that are active in Federal contracting in those industries would gain small business status under the adopted size standards. Based on the same data, SBA estimates that those newly-qualified small businesses under the higher size standards, if adopted, could receive Federal small business contracts totaling $256.6 million annually. That represents a 2.4 percent increase to small business contract dollars from the baseline. Table 9 provides these results by NAICS sector.

The added competition from more businesses qualifying as small can result in lower prices to the Government for procurements set aside or reserved for small businesses, but SBA cannot quantify this impact. Costs could be higher when full and open contracts are awarded to HUBZone businesses that receive price evaluation preferences. However, with agencies likely setting aside more contracts for small businesses in response to the availability of a larger pool of small businesses under the proposed increases to size standards, HUBZone firms might receive more set-aside contracts and fewer full and open contracts, thereby resulting in some cost savings to agencies. SBA cannot estimate such cost savings as it is impossible to determine the number and value of unrestricted contracts to be otherwise awarded to HUBZone firms as set-asides. However, such cost savings are likely to be relatively small as only a small fraction of full and open contracts are awarded to HUBZone businesses.

As shown in Table 9, under SBA's 7(a) and 504 loan programs, based on the data for fiscal years 2018-2020, SBA estimates that there will be no impact to the number of firms receiving 7(a) and 504 loans.

Table 9—Impacts of Increasing Size Standards

Sector 31-33

Other sectors

Total

Number of industries or subindustries (“exceptions”) with proposed increases to size standards

117

144

Total current small businesses in industries with proposed increases to size standards (2017 Economic Census)

66,066

5,252

71,318

Additional firms qualifying as small under proposed increases to size standards (2017 Economic Census)

197

242

% of additional firms qualifying as small relative to current small businesses in industries with proposed increases to size standards (2017 Economic Census)

0.3%

0.9%

0.3%

Number of current unique small firms getting small business contracts in industries with proposed increases to size standards (FPDS-NG FY 2018-2020)

13,854

603

14,320

Additional number of small business firms gaining small business status under proposed increases to size standards (FPDS-NG FY 2018-2020)

109

% increase to number of small businesses relative to current unique small firms getting small business contracts in industries with proposed increases to size standards (FPDS-NG FY 2018-2020)

0.6%

3.6%

0.8%

Total small business contract dollars under current size standards in industries or subindustries with proposed increases to size standards ($ million) (FPDS-NG FY 2018-2020)

$9,617

$1,032

$10,648

Estimated small business dollars available to newly-qualified small firms ($ million) (FPDS-NG FY 2018-2020)

$75.9

$180.6

$256.6

% increase to small business dollars relative to total small business contract dollars under current standards in industries with proposed increases to size standards

0.8%

17.5%

2.4%

Total number of 7(a) and 504 loans to small business in industries with proposed increases to size standards (FY 2018-2020)

1,120

1,164

Total amount of 7(a) and 504 loans to small businesses in industries with proposed increases to size standards ($ million) (FY 2018-2020)

$751

$30

$781

Estimated number of 7(a) and 504 loans to newly-qualified small firms

Estimated 7(a) and 504 loan amount to newly-qualified small firms ($ million)

$0.0

% increase to 7(a) and 504 loan amount relative to the total amount of 7(a) and 504 loans in industries with proposed increases to size standards

0.0%

Total number of EIDL loans to small businesses in industries with proposed increases to size standards (FY 2018-2020)

Total amount of EIDL loans to small businesses in industries with proposed increases to size standards ($ million) (FY 2018-2020)

$2.9

$0.7

$3.5

Estimated no. of EIDL loans to newly-qualified small firms

Estimated EIDL loan amount to newly-qualified small firms ($ million)

$0.0

% increase to EIDL loan amount relative to the total amount of disaster loans in industries with proposed increases to size standards

0.0%

These figures do not include two 6-digit NAICS industries and 5 subindustries or “exceptions” for which Economic Census data is not available.

Total impact represents total unique number of firms impacted to avoid double counting as some firms participate in more than one industry.

Additional dollars are calculated multiplying average small business dollars obligated per unique firm times change in number of firms. Numbers of firms are calculated using the SBA's current size standards, not the contracting officer's size designation.

Excludes COVID-19 related EIDL loans due to their temporary nature. Effective January 1, 2022, SBA stopped accepting applications for new COVID EIDL loans or advances.

Newly-qualified small businesses may also benefit from the SBA's EIDL program. Since the benefit provided through this program is contingent on the occurrence and severity of a disaster in the future, SBA cannot make a precise estimate of this impact. However, based on the disaster loan program data for fiscal years 2018-2020, SBA estimates that, on an annual basis, the newly-defined small businesses under the adopted increases to size standards would not be impacted by SBA's changes to size standards.

Additionally, the newly-defined small businesses would also benefit through reduced fees, less paperwork, and fewer compliance requirements that are available to small businesses through the Federal Government, but SBA has no data to quantify this impact.

Costs of Increases to Size Standards

Besides having to register in the System of Award Management (SAM) to be eligible to participate in Federal contracting and update the SAM profile annually, small businesses incur no direct costs to gain or retain their small business status as a result of the adopted increases to size standards. All businesses willing to do business with the Federal Government must register in SAM and update their SAM profiles annually, regardless of their size status. SBA believes that a vast majority of impacted businesses that are willing to participate in Federal contracting are already registered in SAM and update their SAM profiles annually. More importantly, this final rule does not establish the new size standards for the very first time; rather it intends to modify the existing size standards in accordance with a statutory requirement, the latest data, and other relevant factors.

To the extent that the newly-qualified small businesses could become active in Federal procurement, the adopted increases to size standards may entail some additional administrative costs to the Federal Government as a result of more businesses qualifying as small for Federal small business programs. For example, there will be more firms seeking SBA's loans, more firms eligible for enrollment in the Dynamic Small Business Search (DSBS) database or in

certify.sba.gov,

more firms seeking certification as 8(a)/BD or HUBZone firms or qualifying for small business, WOSB, EDWOSB, and SDVOSB status, and more firms applying for SBA's 8(a)/BD mentor-protégé programs. With an expanded pool of small businesses, it is likely that Federal agencies would set aside more contracts for small businesses under the increases to size standards. One may surmise that this might result in a higher number of small business size protests and additional processing costs to agencies. However, the SBA's historical data on the number of size protests processed shows that the number of size protests decreased following the increases to size standards as part of the first five-year review of size standards. Specifically, on an annual basis, the number of size protests fell from about 600 during fiscal years 2011-2013 (review of most receipts-based size standards was completed by the end of FY 2013), as compared to about 500 during fiscal years 2018-2020 when size standard increases were in effect. That represents a 17 percent decline.

Among those newly-defined small businesses seeking SBA's loans, there

could be some additional costs associated with verification of their small business status. However, small business lenders have an option of using the tangible net worth and net income based alternative size standard instead of using the industry-based size standards to establish eligibility for SBA's loans. For these reasons, SBA believes that these added administrative costs will be minor because necessary mechanisms are already in place to handle these added requirements.

Additionally, some Federal contracts may possibly have higher costs. With a greater number of businesses defined as small due to the adopted increases to size standards, Federal agencies may choose to set aside more contracts for competition among small businesses only instead of using a full and open competition. The movement of contracts from unrestricted competition to small business set-aside contracts might result in competition among fewer total bidders, although there will be more small businesses eligible to submit offers under the adopted size standards. However, the additional costs associated with fewer bidders are expected to be minor since, by law, procurements may be set aside for small businesses under the 8(a)/BD, HUBZone, WOSB, EDWOSB, or SDVOSB programs only if awards are expected to be made at fair and reasonable prices.

Costs may also be higher when full and open contracts are awarded to HUBZone businesses that receive price evaluation preferences. However, with agencies likely setting aside more contracts for small businesses in response to the availability of a larger pool of small businesses under the adopted increases to size standards, HUBZone firms might end up getting fewer full and open contracts, thereby resulting in some cost savings to agencies. However, such cost savings are likely to be minimal as only a small fraction of unrestricted contracts are awarded to HUBZone businesses.

Transfer Impacts of Increases to Size Standards

The adopted increases to 144 employee-based size standards may result in some redistribution of Federal contracts between the newly-qualified small businesses and large businesses and between the newly-qualified small businesses and small businesses under the current standards. However, it would have no impact on the overall economic activity since total Federal contract dollars available for businesses to compete for will not change with changes to size standards. While SBA cannot quantify with certainty the actual outcome of the gains and losses from the redistribution contracts among different groups of businesses, it can identify several probable impacts in qualitative terms. With the availability of a larger pool of small businesses under the adopted increases to size standards, some unrestricted Federal contracts which would otherwise be awarded to large businesses may be set aside for small businesses. As a result, large businesses may lose some Federal contracting opportunities. Similarly, some small businesses under the current size standards may obtain fewer set aside contracts due to the increased competition from larger businesses qualifying as small under the adopted size standards. This impact may be offset by a greater number of procurements being set aside for all small businesses. With larger businesses qualifying as small under the higher size standards, smaller small businesses could face some disadvantage in competing for set aside contracts against their larger counterparts. However, SBA cannot quantify these impacts.

3. What alternatives have been considered?

Under OMB Circular A-4, SBA is required to consider regulatory alternatives to the adopted changes i

This text is long and has been trimmed here. Open the source document for the complete record.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.