Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines
Federal RegisterJul 25, 2018
Ask Donna
What actually matters in this document.
Text
DEPARTMENT OF LABOR
Mine Safety and Health Administration
30 CFR 56 and 75
[Docket No. MSHA-2018-0016]
RIN 1219-AB91
Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines
AGENCY:
Mine Safety and Health Administration, Labor.
ACTION:
Announcement of public stakeholder meetings.
SUMMARY:
The Mine Safety and Health Administration (MSHA) is announcing the dates and locations of public stakeholder meetings on the Agency's Request for Information on Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines.
DATES:
Comments must be received or postmarked by midnight Eastern Standard Time on December 24, 2018. The meeting dates and locations are listed in the
SUPPLEMENTARY INFORMATION
section of this document.
ADDRESSES:
Federal Register
Publications: Access documents electronically at
http://www.msha.gov/regsinfo.htm
or
http://www.regulations.gov
[Docket No. MSHA-2018-0016].
FOR FURTHER INFORMATION CONTACT:
Sheila A. McConnell, Director, Office of Standards, Regulations, and Variances, MSHA, at
mcconnell.sheila.a@dol.gov
(email), 202-693-9440 (voice), or 202-693-9441 (fax). These are not toll-free numbers.
SUPPLEMENTARY INFORMATION:
I. Stakeholder Meetings
MSHA will hold six public stakeholder meetings and one webinar on the Agency's Request for Information (RFI) addressing Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines. The meetings will be conducted in an informal manner. Presenters and attendees may provide written information to the court reporter for inclusion in the record. MSHA will make transcripts of the meetings available at
http://www.regulations.gov
and on MSHA's website at:
https://arlweb.msha.gov/currentcomments.asp.
Interested parties may attend these stakeholder meetings either in-person or
by participating by webinar (See table below).
1.
To attend the stakeholder meeting in Arlington, Virginia:
• Address—201 12th Street South, Arlington, Virginia 22202.
• When you enter the building, take the East elevators to your right, up to the 4th Floor reception area, 4E401, to check in. You will then be escorted to the conference room.
• Nearest metro stations: Pentagon City, and Crystal City. Parking is available on the street and in the building.
2.
To participate at the Webinar by Phone or WebEx:
By Phone—
• Dial the toll-free conference number (Verizon): 1-866-718-1874.
• Attendee access code: 242 716 6.
By WebEx—
• To log into the Webinar, go to:
https://dol.webex.com
.
• Enter Meeting number: 642 399 450.
• Meeting password: M!ne2018.
A. Stakeholder Meetings
Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines Stakeholder Meetings
[Dates, times, and locations]
Date/time
Location
Contact No.
August 7, 2018, 9 a.m. Central Time
Sheraton Birmingham Hotel, 2101 Richard Arrington Jr. Blvd. N, Birmingham, Alabama 35203
205-324-5000
August 9, 2018, 9 a.m. Central Time
DoubleTree by Hilton Hotel, Dallas-Market Center, 2015 Market Center Blvd., Dallas, Texas 75207
214-741-7481
August 16, 2018, 11 a.m. Eastern Time
Webinar
202-693-9440
August 21, 2018, 9 a.m. Pacific Time
Renaissance Reno Downtown Hotel, One South Lake Street, Reno, Nevada 89501
775-682-3900
September 11, 2018, 9 a.m. Eastern Time
National Mine Health and Safety Academy, 1301 Airport Road, Beckley, West Virginia 25813 (Auditorium)
304-256-3100
September 20, 2018, 9 a.m. Eastern Time
Hilton Albany, 40 Lodge Street, Albany, New York 12207
518-462-6611
September 25, 2018, 9 a.m. Eastern Time
Mine Safety and Health Administration (Headquarters), 201 12th Street South, 4E401, Arlington, Virginia 22202
202-693-9440
II. Background
On June 26, 2018, (83 FR 29716), MSHA published an RFI on Safety Improvement Technologies for Mobile Equipment at Surface Mines, and for Belt Conveyors at Surface and Underground Mines. MSHA is soliciting stakeholder comments, data and information on technologies that can reduce accidents involving mobile equipment at surface mines and belt conveyors at surface and underground mines. Specifically, the Agency is requesting information from the mining community regarding the types of engineering controls available, how to implement such engineering controls, and how these controls could be used in mobile equipment and belt conveyors to reduce accidents, fatalities and injuries. MSHA is also seeking suggestions from stakeholders on best practices, training materials, policies and procedures, innovative technologies, and any other information that stakeholders may have available to improve safety in and around mobile equipment, and working near and around belt conveyors. The meetings will provide the mining community an opportunity to discuss and share information about the issues raised in the RFI. Comments must be received or postmarked by midnight Eastern Standard Time on December 24, 2018.
David G. Zatezalo,
Assistant Secretary of Labor for Mine Safety and Health.
[FR Doc. 2018-15808 Filed 7-24-18; 8:45 am]
BILLING CODE 4520-43-P
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.