Notice of Receipt of Petition for Decision That Nonconforming 2003 and 2004 Ferrari Enzo Passenger Cars Are Eligible for Importation

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2004-17181]

Notice of Receipt of Petition for Decision That Nonconforming 2003 and 2004 Ferrari Enzo Passenger Cars Are Eligible for Importation

AGENCY:

National Highway Traffic Safety Administration, DOT.

ACTION:

Notice of receipt of petition for decision that nonconforming 2003 and 2004 Ferrari Enzo passenger cars are eligible for importation.

SUMMARY:

This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2003 and 2004 Ferrari Enzo passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for importation into and sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards.

DATES:

The closing date for comments on the petition is March 29, 2004.

ADDRESSES:

Comments should refer to the docket number and notice number, and be submitted to: Docket Management, Room PL-401, 400 Seventh St., SW., Washington, DC 20590. (Docket hours are from 9 a.m. to 5 p.m.) Anyone is able to search the electronic form of all comments received into any of our dockets by the name of the individual submitting the comment (or signing the comment, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the

Federal Register

published on April 11, 2000 (volume 65, number 70; pages 19477-78), or you may visit

http://dms.dot.gov.

FOR FURTHER INFORMATION CONTACT:

Coleman Sachs, Office of Vehicle Safety Compliance, NHTSA (202-366-3151).

SUPPLEMENTARY INFORMATION:

Background

Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not originally manufactured to conform to all applicable Federal motor vehicle safety standards shall be refused admission into the United States unless NHTSA has decided that the motor vehicle is substantially similar to a motor vehicle originally manufactured for importation into and sale in the United States, certified under 49 U.S.C. 30115, and of the same model year as the model of the motor vehicle to be compared, and is capable of being readily altered to conform to all applicable Federal motor vehicle safety standards.

Petitions for eligibility decisions may be submitted by either manufacturers or importers who have registered with NHTSA pursuant to 49 CFR part 592. As

specified in 49 CFR 593.7, NHTSA publishes notice in the

Federal Register

of each petition that it receives, and affords interested persons an opportunity to comment on the petition. At the close of the comment period, NHTSA decides, on the basis of the petition and any comments that it has received, whether the vehicle is eligible for importation. The agency then publishes this decision in the

Federal Register

.

J.K. Technologies of Baltimore, Maryland (“J.K.”) (Registered Importer 90-006) has petitioned NHTSA to decide whether 2003 and 2004 Ferrari Enzo passenger cars are eligible for importation into the United States. The vehicles that J.K. believes are substantially similar are 2003 and 2004 Ferrari Enzo passenger cars that were manufactured for importation into, and sale in, the United States and certified by their manufacturer as conforming to all applicable Federal motor vehicle safety standards.

The petitioner claims that it carefully compared non-U.S. certified 2003 and 2004 Ferrari Enzo passenger cars to their U.S.-certified counterparts, and found the vehicles to be substantially similar with respect to compliance with most Federal motor vehicle safety standards.

J.K. submitted information with its petition intended to demonstrate that non-U.S. certified 2003 and 2004 Ferrari Enzo passenger cars, as originally manufactured, conform to many Federal motor vehicle safety standards in the same manner as their U.S. certified counterparts, or are capable of being readily altered to conform to those standards.

Specifically, the petitioner claims that non-U.S. certified 2003 and 2004 Ferrari Enzo passenger cars are identical to their U.S. certified counterparts with respect to compliance with Standard Nos. 102

Transmission Shift Lever Sequence

, 103

Defrosting and Defogging Systems

, 104

Windshield Wiping and Washing Systems

, 105

Hydraulic Brake Systems

, 106

Brake Hoses

, 109

New Pneumatic Tires

, 113

Hood Latch Systems

, 116

Brake Fluid

, 124

Accelerator Control Systems

, 201

Occupant Protection in Interior Impact

, 202

Head Restraints

, 204

Steering Control Rearward Displacement

, 205

Glazing Materials

, 206

Door Locks and Door Retention Components

, 207

Seating Systems

, 210

Seat Belt Assembly Anchorages

, 212

Windshield Retention

, 214

Side Impact Protection

, 216

Roof Crush Resistance

, 219

Windshield Zone Intrusion

, 301

Fuel System Integrity

, 302

Flammability of Interior Materials

, and 401

Interior Trunk Release

.

With regard to the Bumper Standard found at 49 CFR part 581, petitioner states that the vehicles are equipped with bumpers and support structures that are identical to those found on their U.S.-certified counterparts, with the exception that front marker lights must be cut into appropriately marked castings on the front bumpers.

Petitioner also contends that the vehicles are capable of being readily altered to meet the following standards, in the manner indicated:

Standard No. 101

Controls and Displays

: reprogramming of the instrument cluster and replacement of several of the placards to comply with the requirements of this standard.

Standard No. 108

Lamps, Reflective Devices and Associated Equipment

: (a) Installation of U.S.-model headlamps and front sidemarker lights; (b) installation of U.S.-model taillamp assemblies, which incorporate rear sidemarker lights, or modification of the existing assemblies to meet the standard.

Standard No. 110

Tire Selection and Rims

: installation of a tire information placard.

Standard No. 111

Rearview Mirror

: inscription of the required warning statement on the passenger side rearview mirror, or replacement of that mirror with a U.S.-model component.

Standard No. 114

Theft Protection

: programming of the vehicles to activate the key warning and seat belt warning systems.

Standard No. 118

Power-Operated Window Systems

: programming of the vehicles so that they comply with the standard.

Standard No. 208

Occupant Crash Protection

: (a) Programming of the vehicles to ensure that the seat belt warning system activates in the proper manner; (b) replacement of the seat belts with U.S.-model components. The petitioner states that the vehicles are equipped with a seat belt warning lamp that is identical to the component used on the vehicles' U.S.-certified counterparts. The petitioner further states that the vehicles are equipped with dual front air bags and that they should be equipped with combination lap and should belts at the front outboard seating positions that are self-tensioning and released by means of a single red push button.

Standard No. 209

Seat Belt Assemblies

: replacement of the seat belts with U.S.-model components.

Standard No. 225

Child Restraint Anchorage Systems

: installation of a child seat “bracket for belt coupler.”

The petitioner states that all vehicles must be inspected to ensure compliance with the Theft Prevention Standard at 49 CFR part 541, and that anti-thefts marking must be added to vehicles that are not already so marked.

The petitioner also states that a vehicle identification plate must be affixed to the vehicles near the left windshield post and a reference and certification label must be affixed in the area of the left front door post to meet the requirements of 49 CFR part 565.

Interested persons are invited to submit comments on the petition described above. Comments should refer to the docket number and be submitted to: Docket Management, Room PL-401, 400 Seventh St., SW., Washington, DC 20590. (Docket hours are from 9 a.m. to 5 p.m.) It is requested but not required that 10 copies be submitted.

All comments received before the close of business on the closing date indicated above will be considered, and will be available for examination in the docket at the above address both before and after that date. To the extent possible, comments filed after the closing date will also be considered. Notice of final action on the petition will be published in the

Federal Register

pursuant to the authority indicated below.

Authority:

49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; delegations of authority at 49 CFR 1.50 and 501.8.

Issued on: February 24, 2004.

Kenneth N. Weinstein,

Associate Administrator for Enforcement.

[FR Doc. 04-4399 Filed 2-26-04; 8:45 am]

BILLING CODE 4910-59-P