Certain Compact Ductile Iron Waterworks Fittings and Glands From the People's Republic of China: Final Results of Antidumping Duty Administrative Review

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-820]

Certain Compact Ductile Iron Waterworks Fittings and Glands From

the People's Republic of China: Final Results of Antidumping Duty

Administrative Review

AGENCY: Import Administration, International Trade Administration,

Department of Commerce.

ACTION: Notice of final results of first antidumping duty

administrative review.

-----------------------------------------------------------------------

SUMMARY: On October 14, 1999, the Department of Commerce (``the

Department'') published the preliminary results of the administrative

review of the antidumping duty order on Certain Compact Ductile Iron

Waterworks Fittings and Glands (``CDIW'') from the People's Republic of

China (64 FR 55697). The review covers shipments to the United States

by one exporter of the subject merchandise, Beijing Metals and Minerals

Import and Export Corporation, (``BMMIEC''), during the period

September 1, 1997, through August 31, 1998.

We gave interested parties an opportunity to comment on our

preliminary results and received no comments. The final results remain

unchanged from the preliminary results. The final weighted-average

dumping margin for the reviewed firm is listed below in the section

entitled ``Final Results of Review.''

EFFECTIVE DATE: January 11, 2000.

FOR FURTHER INFORMATION CONTACT: Lyman Armstrong or Paige Rivas, AD/CVD

Enforcement Group II, Office IV, Import Administration, International

Trade Administration, U.S. Department of Commerce, 14th Street and

Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-

3601 or (202) 482-0651 respectively.

Applicable Statute and Regulations

Unless otherwise indicated, all citations to the Tariff Act of

1930, as amended (the Act), are references to the provisions effective

January 1, 1995, the effective date of the amendments made to the Act

by the Uruguay Round Agreements Act. In addition, unless otherwise

indicated, all citations to the Department's regulations are to the

regulations at 19 CFR part 351 (1999).

SUPPLEMENTARY INFORMATION:

Background

On October 14, 1999, the Department published the preliminary

results of the administrative review of the antidumping duty order on

Certain Compact Ductile Iron Waterworks Fittings and Glands (``CDIW'')

from the People's Republic of China (64 FR 55697). We invited

interested parties to comment and received no comments. The Department

has now completed this review in accordance with section 751 of the Act

and section 351.213 of its regulations.

Scope of Review

The products subject to this antidumping duty order are: (1)

Certain compact ductile iron waterworks (CDIW) fittings of 3 to 16

inches nominal diameter regardless of shape, including bends, tees,

crosses, wyes, reducers, adapters, and other shapes, whether or not

cement line, and whether or not covered with bitumen or similar

substance, conforming to American Water Works Association/American

National Standards Institute (AWWA/ANSI) specification C153/A21.53, and

rated for water working pressure of 350 PSI; and (2) certain CDIW

standard ductile iron glands for fittings in sizes 3 to 16 inches,

conforming to AWWA/ANSI specification C111/A21.11 and rated for water

working pressure of 350 PSI. All accessory packs (including accessory

packs containing glands), are excluded from the scope of this order.

[[Page 1591]]

The types of CDIW fittings covered by this order are compact

ductile iron mechanical joint waterworks fittings and compact ductile

iron push-on joint waterwork fittings, both of which are used for the

same application. CDIW fittings are used to join water main pressure

pipes, valves, or hydrants in straight lines, and change, divert,

divide, or direct the flow of raw and/or treated water in piping

systems. CDIW fittings attach to the pipe, valve, or hydrant at a joint

and are used principally for municipal water distribution systems. CDIW

glands are used to join mechanical joint CDIW fittings to pipes.

CDIW fittings with nominal diameters greater than 16 inches, are

specifically excluded from the scope of the order. Nonmalleable cast

iron fittings (also called gray iron fittings) and full-bodied ductile

fittings are also specifically excluded from the scope of this order.

Nonmalleable cast iron fittings have little ductility and are generally

rated only 150 to 250 PSI. Full-bodied ductile fittings have a longer

body design than a compact fitting because in the compact design the

straight section of the body is omitted to provide a more compact and

less heavy fitting without reducing strength or flow characteristics.

In addition, the full-bodied ductile fittings are thicker walled than

the compact fittings.

Full-bodied fittings are made of either gray iron or ductile iron,

in sizes of 3 to 48 inches, conform to AWWA/ANSI specification C110/

C21.10, and are rated to a maximum of only 250 PSI. In addition,

compact ductile iron flanged fittings are excluded from the scope of

this order, as they have significantly different characteristics and

uses than CDIW fittings.

CDIW fittings are classifiable under subheading 7307.19.30.00 of

the Harmonized Tariff Schedule of the United States (HTSUS). Standard

ductile iron glands are classifiable under HTSUS subheading

7325.99.10.00. Although the HTSUS subheadings are provided for

convenience and customs purposes, our written description of the scope

of this order is dispositive.

Final Results of Review

The final results remain unchanged from the preliminary results as

the Department used the same methodology described in the preliminary

results. As a result of our comparison of export price to normal value,

we determine that the following weighted-average dumping margin exists:

------------------------------------------------------------------------

Manufacturer/Exporter Margin

------------------------------------------------------------------------

Beijing Metals and Minerals Import and .09 percent (de minimis).

Export Corporation.

------------------------------------------------------------------------

The Department shall determine, and Customs shall assess,

antidumping duties on all appropriate entries. Pursuant to 19 CFR

351.212(b)(1), we have calculated an importer-specific duty assessment

rate by dividing the total amount of dumping margins calculated for

sales to each importer by the total number of units of those same sales

sold to that importer. The unit dollar amount will be assessed

uniformly against each unit of merchandise of that specific importer's

entries during the POR. In accordance with 19 CFR 351.106(c)(2), we

also will instruct Customs to liquidate without regard to antidumping

duties any entries for which the importer-specific antidumping duty

assessment rate is de minimis, i.e., less than 0.5 percent. The

Department will issue appraisement instructions directly to Customs.

Furthermore, the following deposit requirements will be effective

upon publication of the final results of this antidumping duty

administrative review for all shipments of the subject merchandise

entered, or withdrawn from warehouse, for consumption on or after the

publication date, as provided by section 751(a)(1) of the Act: (1) For

BMMIEC, which has a separate rate, the cash deposit rate will be zero;

(2) for any previously reviewed PRC and non-PRC exporter with a

separate rate (including those companies for which we terminated the

review), the cash deposit rate will be the company-specific rate

established for the most recent period; (3) the cash deposit rate for

all other PRC exporters will continue to be 127.38 percent, the PRC-

wide rate established in the LTFV investigation; and (4) the cash

deposit rate for non-PRC exporters of subject merchandise from the PRC

will be the rate applicable to the PRC supplier of that exporter. These

requirements, when imposed, shall remain in effect until publication of

the final results of the next administrative review.

This notice serves as a final reminder to importers of their

responsibility under 19 CFR 351.402(f) to file a certificate regarding

the reimbursement of antidumping duties prior to liquidation of the

relevant entries during this review period. Failure to comply with this

requirement could result in the Secretary's presumption that

reimbursement of antidumping duties occurred and the subsequent

assessment of double antidumping duties.

This administrative review is issued and published in accordance

with sections 751(a)(1) and 777(i)(1) of the Act.

Dated: January 5, 2000.

Robert S. LaRussa,

Assistant Secretary for Import Administration.

[FR Doc. 00-637 Filed 1-10-00; 8:45 am]

BILLING CODE 3510-DS-P