Revocation of Antidumping and Countervailing Duty Orders on Certain Carbon Steel Products From Canada, Germany, Korea, the Netherlands, and Sweden

DEPARTMENT OF COMMERCE

International Trade Administration

[A-122-823, A-428-814, C-428-817, A-580-815, C-580-818, A-421-804, C-401-401]

Revocation of Antidumping and Countervailing Duty Orders on Certain Carbon Steel Products From Canada, Germany, Korea, the Netherlands, and Sweden

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of Revocation of Antidumping and Countervailing Duty Orders on Certain Carbon Steel Products from Canada, Germany, Korea, the Netherlands, and Sweden.

SUMMARY:

Pursuant to section 751(c) of the Tariff Act of 1930, as amended (“the Act”), the United States International Trade Commission (“the Commission”) determined that revocation of the following antidumping and countervailing duty orders on certain carbon steel products from Canada (A-122-823), Germany (A-428-814, C-428-817), Korea (A-580-815, C-580-818), the Netherlands (A-421-804), and Sweden (C-401-401), is not likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. See 65 FR 75301 (December 1, 2000). Therefore, pursuant to section 751(d)(2) of the Act and 19 CFR 351.222(i)(1), the Department of Commerce (“the Department”) is revoking the following antidumping and countervailing duty orders:

Product

Country

ITA Case No.

Cut-to-Length

Canada

A-122-823

Cold-Rolled

Germany

C-428-817

Cold-Rolled

Germany

A-428-814

Cold-Rolled

South Korea

A-580-815

Cold-Rolled

South Korea

C-580-818

Cold-Rolled

Netherlands

A-421-804

Cold-Rolled

Sweden

C-401-401

Pursuant to section 751(c)(6)(A)(iv) of the Act and 19 CFR 351.222(i)(2), the effective date of revocation is January 1, 2000.

EFFECTIVE DATE:

January 1, 2000.

FOR FURTHER INFORMATION CONTACT:

Martha V. Douthit or James P. Maeder, Office of Policy for International Trade Administration, US Department of Commerce, 14th Street and Constitution Ave., NW, Washington, DC 20230; telephone: (202) 482-5050 or (202) 482-3330, respectively.

SUPPLEMENTARY INFORMATION:

Background

On September 1, 1999, the Department initiated (64 FR 47767), and the Commission instituted, (64 FR 47862) sunset reviews of the antidumping and countervailing duty orders on certain carbon steel products from Australia, Belgium, Brazil, Canada, Finland, France, Germany, Japan, Korea, Mexico, Netherlands, Poland, Romania, Spain, Sweden, Taiwan, and the United Kingdom, pursuant to section 751(c) of the Act. As a result of its reviews, the Department found that revocation of the following antidumping and countervailing duty orders on certain carbon steel products would likely lead to continuation or recurrence of dumping and/or subsidization, and notified the Commission of the magnitude of the margins likely to prevail were the orders revoked:

Product

Country

ITA Case No.

Federal Register citation

Date

Corrosion-Resistant

Australia

A-602-803

65 FR 18049

04/06/00

Cut-to-Length

Belgium

A-423-805

65 FR 18292

04/07/00

Cut-to-Length

Belgium

C-423-806

65 FR 18066

04/06/00

Cut-to-Length

Brazil

A-351-817

65 FR 18052

04/06/00

Cut-to-Length

Brazil

C-351-818

65 FR 18065

04/06/00

Corrosion-Resistant

Canada

A-122-822

65 FR 47379

04/02/00

Cut-to-Length

Canada

A-122-823

65 FR 47383

08/02/00

Cut-to-Length

Finland

A-405-802

65 FR 18054

04/06/00

Corrosion-Resistant

France

A-427-808

65 FR 18050

04/06/00

Corrosion-Resistant

France

C-427-810

65 FR 18063

04/06/00

Cold-Rolled

Germany

A-428-814

65 FR 18046

04/06/00

Cold-Rolled

Germany

C-428-817

65 FR 47407

08/02/00

Corrosion-Resistant

Germany

C-428-817

65 FR 47407

08/02/00

Corrosion-Resistant

Germany

A-428-815

65 FR 18051

04/06/00

Cut-to-Length

Germany

C-428-817

65 FR 47407

08/02/00

Cut-to-Length

Germany

A-428-816

65 FR 18055

04/06/00

Corrosion-Resistant

Japan

A-588-826

65 FR 47380

08/02/00

Cold-Rolled

Korea

A-580-815

65 FR 18044

04/06/00

Cold-Rolled

Korea

C-580-818

65 FR 18973

04/10/00

Corrosion-Resistant

Korea

A-580-816

65 FR 18044

04/06/00

Corrosion-Resistant

Korea

C-580-818

65 FR 18973

04/10/00

Cut-to-Length

Mexico

A-201-809

65 FR 18052

04/06/00

Cut-to-Length

Mexico

C-201-810

65 FR 18067

04/06/00

Cold-Rolled

Netherlands

A-421-804

65 FR 47377

08/02/00

Cut-to-Length

Poland

A-455-802

65 FR 18054

04/06/00

Cut-to-Length

Romania

A-485-803

65 FR 47382

08/02/00

Cut-to-Length

Spain

A-469-803

65 FR 18056

04/06/00

Cut-to-Length

Spain

C-469-804

65 FR 18307

04/07/00

Cut-to-Length

Sweden

A-401-805

65 FR 18054

04/06/00

Cut-to-Length

Sweden

C-401-804

65 FR 18305

04/07/00

Cold-Rolled

Sweden

C-401-401

65 FR 18290

04/07/00

Carbon Steel Plate

Taiwan

A-583-080

65 FR 18043

04/06/00

Cut-to-Length

UK

C-412-815

65 FR 18309

04/07/00

Cut-to-Length

UK

A-412-814

65 FR 18056

04/06/00

On December 1, 2000, the Commission determined, pursuant to section 751(c) of the Act, that revocation of the antidumping and countervailing duty orders on certain carbon steel products from Canada (A-122-823), Germany (C-428-817; A-428-814), Korea (C-580-818; A-580-815), the Netherlands (A-421-804), and Sweden (C-401-401) would not be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.

See

Certain Carbon Steel Products from Australia, Belgium, Brazil, Canada, Finland, France, Germany, Japan, Korea, Mexico, Netherlands, Poland, Romania, Spain, Sweden, Taiwan, and the United Kingdom, 65 FR 75301 (December 1, 2000), as amended 65 FR 77074 (December 8, 2000), and USITC Publication 3364, Investigation Nos. AA1921-197 (Review), 701-TA-231, 319-320, 322, 325-328, 340, 342, and 348-350 (Review), and 731-TA-573-576, 578, 582-587, 604, 607-608, 612, and 614-618 (Review) (November 2000).

Scope of the Orders:

See Appendix.

Determination

As a result of the determination by the Commission that revocation of the antidumping and countervailing duty orders on cut-to-length steel products from Canada (A-122-823), cold-rolled steel products from Germany (A-428-814, C-428-817), cold-rolled steel products from Korea (A-580-815, C-580-818), cold-rolled steel products from the Netherlands (A-421-804), and cold-rolled steel products from Sweden (C-401-401), is not likely to lead to continuation or recurrence of material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, and 19 CFR 351.222(i)(1), the Department hereby revokes the antidumping and countervailing duty orders on cut-to length steel plate from Canada (A-122-823), cold-rolled steel products from Germany (C-428-817, A-428-814), cold-rolled steel products from Korea (A-580-815, C-580-818), cold-rolled steel products from the Netherlands (A-421-804), and cold-rolled steel products from Sweden (C-401-401).

The Department will instruct the Customs Service to discontinue the suspension of liquidation and collection of cash deposit rates on entries of the subject merchandise entered or withdrawn from warehouse on or after January 1, 2000. The effective date of revocation of these antidumping and countervailing duty orders is January 1, 2000.

Dated: December 8, 2000.

Joseph A. Spetrini,

Acting Assistant Secretary for Import Administration.

Appendix—Scope of Antidumping and Countervailing Duty Orders; Cold-Rolled Carbon Steel Products

The product covered by these antidumping and countervailing duty orders is certain cold-rolled carbon steel flat products from Germany (C-428-817; A-428-814), Korea (C-580-818; A-580-815), the Netherlands (A-421-804) and Sweden (C-401-401). The product includes cold-rolled (cold-reduced) carbon steel flat-rolled products, of rectangular shape, neither clad, plated nor coated with metal, whether or not painted, varnished or coated with plastics or other nonmetallic substances, in coils (whether or not in successively superimposed layers) and of a width of 0.5 inch or greater, or in straight lengths which, if of a thickness less than 4.75 millimeters, are of a width of 0.5 inch or greater and which measures at least 10 times the thickness or if of a thickness of 4.75 millimeters or more are of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (“HTS”) under item numbers: 7209.11.0000, 7209.12.0000, 7209.12.0030, 7209.12.0090, 7209.13.0000, 7209.13.0030, 7209.13.0090, 7209.14.0030, 7209.14.0090, 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0090, 7209.17.0030, 7209.17.0060, 7209.17.0090, 7209.18.1530, 7209.18.1560,

7209.18.2550, 7209.18.6000, 7209.21.0000, 7209.22.0000, 7209.23.0000, 7209.24.1000, 7209.24.5000, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.31.0000, 7209.32.0000, 7209.33.0000, 7209.34.0000, 7209.41.0000, 7209.42.0000, 7209.43.0000, 7209.44.0000, 7209.90.0000, 7210.70.3000, 7210.90.9000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6085, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.30.1030, 7211.30.1090, 7211.30.3000, 7211.30.5000, 7211.41.1000, 7211.41.3030, 7211.41.3090, 7211.41.5000, 7211.41.7000, 7211.41.7030, 7211.41.7060, 7211.41.7090, 7211.49.1030, 7211.49.1090, 7211.49.3000, 7211.49.5000, 7211.49.5030, 7211.49.5060, 7211.49.5090, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7215.50.0015, 7215.50.0060, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.11.1000, 7217.11.2000, 7217.11.3000, 7217.19.1000, 7217.19.5000, 7217.21.1000, 7217.29.1000, 7217.29.5000, 7217.31.1000, 7217.39.1000, 7217.39.5000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090.

Included in the scope of the antidumping and countervailing duty orders on cold-rolled steel products from Germany (C-428-817; A-428-814), Sweden (C-401-401), Korea (C-580-818; A-580-815), and the Netherlands (A-421-804), are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been worked after rolling)—for example, products which have been bevelled or rounded at the edges. Excluded are certain shadow mask steel; i.e., aluminum-killed, cold-rolled steel coil that is open-coil annealed, has a carbon content of less than 0.002 percent, is of 0.003 to 0.012 inch in thickness, 15 to 30 inches in width, and has an ultra flat, isotropic surface. The HTS item numbers in the scope of cold-rolled carbon steel products from Germany Korea, the Netherlands, and Sweden, are provided for convenience and custom purposes. The written description remains dispositive.

Cut-to-Length Steel Plate From Canada (A-122-823)

The scope of the antidumping duty order on cut-to-length steel plate from Canada includes hot-rolled carbon steel universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 millimeters but not exceeding 1,250 millimeters and of a thickness of not less than 4 millimeters, not in coils and without patterns in relief), of rectangular shape, neither clad, plated, nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances; and certain hot-rolled carbon steel flat-rolled products in straight lengths, of rectangular shape, hot rolled, neither clad, plated, nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances, 4.75 millimeters or more in thickness and of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (“HTS”) under item numbers: 7208.40.3030, 7208.40.3060, 7208.51.5030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, and 7212.50.0000. Included in this order are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”)—for example, products which have been beveled or rounded at the edges. Excluded from the antidumping duty order on cut-to-length from Canada is grade X-70 plate. Also excluded is cut-to-length carbon steel plate, meeting the following criteria: (1) 100 percent dry steel plates, virgin steel, no scrap content (free of Cobalt-60 and other radioactive nuclides); (2) 0.290 inches maximum thickness, plus 0.0, minus 0.030 inches; (3) 48.00 inch wide, plus 0.05, minus 0.0 inches; (4) 10 foot lengths, plus 0.5, minus 0.0 inches; (5) flatness, plus/minus 0.5 inch over 10 feet; (6) AISI 1006; (7) tension leveled; (8) pickled and oiled; and (9) carbon content, 0.3 to 0.8 (maximum).

On February 12, 1999, the Department revoked the order with respect to cut-to-length carbon steel plate from Canada, free of cobalt-60 and other radioactive nuclides; and with certain dimensions and other characteristics. See 64 FR 7167 (February 12, 1999). The HTS item numbers are provided for convenience and customs purposes. The written description remains dispositive.

[FR Doc. 00-31943 Filed 12-14-00; 8:45 am]

BILLING CODE 3510-DS-P