Record and brief — William H. Plummer, Administrator of Hiram Tucker, Deceased, Appellant, vs. Sargent and Company

Supreme Court brief1886

Ask Donna

What actually matters in this document.

Text

*

COURT OF THE UNITED STATES.

ITED STATES FOR : “i

aa

tae

SUPREME. COURT OF THE UNITED STATES.

OCTOBER TERM, 1885.

No. 378.

WILLIAM H. PLUMMER, ADMINISTRATOR OF HIRAM

TUCKER, DECEASED, APPELLANT,

VS.

SARGENT AND COMPANY.

APPEAL FROM THE CIRCUIT COURT OF THE UNITED STATES FOR

THE DISTRICT OF CONNECTICUT.

INDEX.

Original. Print.

IEE ciidin ditkele nde omnd ab onsale cimmanns oinniabait: sie diisan aeiahil nla nid omaiia wien 6

NONE cinidciitin <cnk cain dudes xviing tienen beth dkinw able! cde dom it

I 5 Zin sslcciat aehiitaniinns sesaseremphae iissipoty ‘senieunll cih;jaia sea gnats olaiidiuntnls “ash aeeaitagaieimaonh 14

SI CO St CHE CONG in ecce wcen commen bail dtimabin on see awmee 16

NE CI insite ds ‘ecsaineenk iiss cie ence: sonst sieht tesnlinia =aenis demaiinsane 17

NE cttiaitictn i eee sales vn ew cae atcinths sane din Cnn Ondnes <0 be «mmm 24

SI Oe IN iss ccc mehendeuieinet anid sank danmannh ed OW keene weeu emewene 25

NE rae ina bial eae pene thd eh wkend aera ediinmeenes OO

ST siiccnbind cai dndetimaimensamuciiie eames amunban vb mk wm iemh one wenn 27

PE inna ciecinsel dieninat enmine 06 atin cone women 6aah ebnn aden ome 33

NE IN od cee secon mein em eution <nae pao wean nace dil 4

Se Oe CRIN idee ice scwe Hace ones come nnewes sane salon 36

Deposition of Hiram Tucker 22.2.0... 22. ce ewes «200 ewenes «a dtnes 36

Tucker exhibit AA—Reissue Letters Patent No. 2355 granted Tucker

Manufacturing Co., September 11, 1866 .. .... 92

B—Reissue Letters Patent No. 2356 granted Tucker

Manafacturing Co., September 11, 1866...._.

a vc 06a dnda nein tews enum snans

E—Certificate as to appointment of Benj. KR. Cartis,

administrator, B62 nc 0 e 2w--nee sone oo

Exhibit—Sargent Letter No. 1—Letter of Sargert to Tucker, September

20, 1876... ee ae EE OE OEE 6 EE OES OOH 6K LHL MS

JUDD &@ DETWEHILER, PRINTERS, WASHINGTON.

( pinion te

(Order of revivor

Clerk’s certificate

Evidence for defendants

Deposition of Purmont. Bradford

Frederick W. Brocksieper

Jonah Bi Ba i siccttttiiedxne vaioe wnile enone

INDEX.

Exhibit—Sargent Letter No. 2—Letter of Sargent to Tucker-_~-----

DDD—Affidavit of H. B. Sargent ...-.-.----~-----.---

Affidavit of F. W. Brocksieper ....-. ...----- ----

Purmont Bradford

-——<-o ae waeweewnw om ew ee wre er ee ee

9. BRIE ks cineca sce aris ks

BE. Es I ins kbs Se ends hen eden

Ts TA AOE cients vinnie cnninmind: waigihbewm <i

George H. Sargent ..........--- ...

-——— -— — oO ewe

,

“~-—-— + — <= _—--— =

~“-—-<——=—"AW eee OKO renner eo RP ee Eee fo ee eee ee

-—-———K—K oO Ow KK wr ww ew ew enw KH Ow ee ee =

Sebite FI 8. Bi ciples cmiten edie pits attic beige aicigate-o

en 5 TR dias warecnien natasha state sain eine

F. W. Brocksieper

eee «we te tf ee ewe KC Oe ee ewemwm se ee lr CT Uc Or rere ee

Perel: FIG sic winters 600 a penal ete bh oh

FOR ©. TI hak incid opriowan putindninkpiedaaee

Joseph B. Sargent..---- -.

Rises: FT cnn wits sok thas antes chee

Raety FPO anicisdin’ cccieatmitiikigeaie om qin keen pues os

Frederick W. Brocksieper (recalled) -.....---.-.----

George Ei. Sargent saddens <<

-~--+--—<—

OOTED Fe. PE cmt sath vittea ae ue

TD ROMNS . PAINE onc ons. Sekt eis at

SORE Ti FIR isis sivas wile bedeone Medicaid os eee aa? Sama e

William R. Sawyer -_.. ~~.

Edwin R. Angevine ~~.

-

Writ of ING ccc iasintinn nen

Stipulation as to exhibits....-- -

~_—““~e -—=— = 28 ee Oe OO On ee ee ee ee Oe +

~——— ewe tie er ee

I er i ile a i tea

a

-~——-- *— — — oe oe oe ~“—-—2e2 «——~-*-

_——e —=— ef —— — — ee re eer ee ee +

_—-————-— -— — — ee — ~~ -—

ee “=

--—-—-—--—-- © — ew own w + ewe wn ewer re ee

_——- © — — — oo

-——e «=e oe

;

—-— += ee! — &

—--—-—s- eee = «~

~-_ ---———-— - — we ee oer Ke re

“se .- —— e- ~— = +

-_——-— +--+ «=

ee ee ee ee ee ee ee ee

Original.

107

109

113

118

123

129

135

Print.

rage Oe AR

er eee ae e

a eal

5 Bie il Avs :

io ne PE ste *

; " ML Ge EO Og EEE Se OOP RE

os BAS 5 ee a ara ite Oe 2 alan ee Sas 4 nes 5 be + oy Ria

+ ¥r . en Se 4 ee r ae Le Pus By i Nine | may SS yee

io US 2 aS So eames Bol oieaie G8 te SR Ste ssi lead ade Lens SO

BaP oe : e = ; .

WILLIAM: H. PLUMMER, ADM’R, &C., VS. SARGENT & COMPANY. 1

1 to 6 Hiram Tucker, Complainant,

v. In Equity.

SARGENT & Company, Defendant.

To the Honorable the Supreme Court of the United States:

The appeal of William H. Plummer, of Boston, in the county of

Suffolk and State of Massachusetts, as he is the administrator of the

estate of Hiram Tucker, deceased, late of said Boston, complainant

and appellant, respectfully showeth :

That upon the 6th day of January, A. D. 1880, the said Hiram

Tucker, then being in full life, filed his bill of gomplaint in the cir-

cuit court of the United States for the district of Connecticut against

the above-named defendant and appellee, showing that he was the

original and first inventor of a new and useful manufacture of tron

ornamented in imitation of bronze, and of the process for producing

the same, fully described in the letters patent which were issued to

said Tucker therefore, which were dated the 15th day of December,

A. D. 1883, whereby there was secured to your orator the full and

exclusive right and liberty of practicing said process for or-

7 namenting iron in imitation of bronze, as set forth in said

letters patent, for the full term and period of seventeen years

from and after the date of said patent.

That thereafter, by reason of a defective specification, said letters

patent became inoperative by reason of a defective specification, and

that the same were duly surrendered and cancelled, and proper pro-

ceedings being had, new reissued letters patent in two divisions were

issued for the same invention, the one for the process and the other

for the product, both dated the 11th day of September, A. D. 1856,

numbered, viz., No. 2355 & 2356, whereby there was secured the full

and exclusive right and liberty of ornamenting iron in accordance

with said invention, of which the said Tucker, at the time of the

bringing of said bill was in full enjoyment and possession.

That the said defendant, well knowing the premises and in viola-

tion of said Tucker's exclusive rights same said reissued patents, was

using and selling large quantities of iron ornaments in imitation of

bronze by the process described in said reissued letters patent, and

was practicing said process extensively in the manufacture of various

kinds uf ironware, to the great injury of the comnplainant, and

8 — praying that said defendant be restrained by a writ of injunc-

tion from practicing the said process of or:amentation, and

selling or using articles ornamented by it, and that deferidant should

be decreed to account for and pay over to the said complainant all

such gains and profits as it had made and acquired from the unlaw-

ful use and practice aforesaid, and such other relief as the complain-

ant was entitled to receive.

And thereafter the said defendant, having appeared in said court,

filed its answer, alleging that said reissued letters patent were void

for vagueness and uncertainty, and for being for a different inven-

tion than that claimed in the original letters patent, and as pur-

porting to secure exclusive rights which in their nature are not

patentable, also denying that the defendants had colored iron by the

1—378 |

—. mee ne eh tae a aint i} ¥ ere ES rat

5 PS, +e: ax in ee SP . pores. ‘ *

iy fe Vacs ee pi aA Ss ee peal x ner Sia | reg

eee kG. > Re eg aia * ee Bs) =

UN 4 eS Be OY. SRI Fe ae . @ we © > z+

y , ila tt 3 , ‘ ‘

’ Ril tp te oe oe . Si ai ORT eg a ign pairs i ally 6. B35 ee ae " : he "

Pe a ee Og EP: Ae eb ON A Se edt Pe A MAE ee AOL Ce! pn thc NOR TES, ek Ma ae al pio od F ss P <> mn ee ER ee ee,

Chi gm iat tant. Se Eee f FAR EP Los RRS Beg Gee oho ag, ee NE RS a ee TERE Sa eRe Se Le EN ET OE SE oe ee MEER CU SRS GEM ot RD eR aie Se ME er Saree es SR ce Pe, Ree, ok a eeee

ee ag Ss: . ; 7™~ Se Ge TRIAD ge Ray Aree hs Fv SEE PRE SO eee He. Wael ETRE A BN ee Ceiee Ae sole MBN pe Pa ey et’

y hover , . ; ea eee Re ‘ x Se ae

‘

2 WILLIAM H. PLUMMER, ADM’R, &C., VS.

process described in said reissued patents, and alleging that the de-

fendants had colored iron only by processes as were 1n_ public use

more than two years “aes to the application of Hiram Tucker for a

patent therefor, and that said Tucker was not the original inventor

thereof.

That the parties were at issue on said bill and answer; that proofs :

thereupon were taken and filed and a hearing had thereon before

said court, and thereafter, on the 20th day of September, A. D.

9 1881, did make its final judgment, order, and decree dismiss- }

ing said bill of complaint with costs. :

That on or about the day of , A. D. 188-, the said

Tucker died, and the said Plummer was, on the -day of

A. D. 188-, appsinted his administrator; and whereas, upon exam-

ination, he believes said decree to have been erroneous, and disas-

trous to the estate of said deceased, therefore the appellant was filed

a bill of revivor and obtained a decree reviving a lan and he

now appeals from the whole of said decree of said circuit court, and

respectfully prays that the decree thereof and the bill, answer, plead-

ings, depositions, evidence of proceedings, and the whole record and

evidence in the said cause may be sent to the Supreme Court of the

United States without delay, and that the said Supreme Court will

proceed to hear the said cause anew, and that the said decree of the

circuit court and every part thereof may be reversed by a decree

made in accordance with the prayer of said bill of complaint, or |

| | such other decree as to the said Supreme Court shall seem just.

WILLIAM H. PLUMMER,

Administrator Estate of Hiram Tucker. |

10 UNITED STATES OF AMERICA, |... 7

District of Massachusetts, ads

| Boston, May 10, 1883.

| Then personally appeared the above-named William H. Plummer

| and subscribed the foregoing bill and made oath that the statements

therein made as of his own knowledge are true, and that those ~~

made upon information and belief he believes to be true.

Before me—

[NOTARIAL SEAL. } GEO. W. MORSE,

+ Notary Public.

,

11 Bond.

Know all men by these presents that we, William H. Plummer,

of Cambridge, county of Middlesex, and State of Massachusetts, prin-

cipal, and Geo. W. Morse, of Newton, county of Middlesex, and State

of Massachusetts, and Samuel P. Teele, of Cambridge, county of Mid-

dlesex, and State of Massachusetts, sureties, are held and firmly

bound unto i & Co. in the sum of three hundred dollars, to

be paid as liquidated damages; for the payment of which, well and

| truly to be made to the United States, we bind ourselves, our heirs,

executors, administrators, or assigns, jointly and severally, firmly by

these presents. |

*

their legal liabilities, at least.

. r - _ +4 a ey | 7 jAe' ho ru 7 . -

5 ee * ae SA tee m 5s » wee ee ye ee hae Seat - , eae SS

FA - bo Re we? le oy aes +> > — " ae a he PAA neat’ ona ae be Ostia eS, AE . 7 ¥ et OF aD nee ~ mn s %. 0

, ys aoe 5h ll aaa gi ae Sapte een. SP ae Pee WaT IES ek a é . c

Le RR ee TS er i ea te Nie rods See

Sealed with our seals and dated this 17th day of May, A. D. 1883.

The condition of the above obligation is such that whereas the

said William H. Plummer hath appealed to the Supreme Court of

the United States to reverse the jecamsent rendered in the case of

Hiram Tucker vs. Sargent & Co. by the United States circuit court

for the district of Connecticut.

Now, therefore, this condition of this obligation is such that

12 if the above-named William H. Plummer shall prosecute his

said appeal to effect and answer all costs if he shali fail to

inake good his plea, then this obligation is void; otherwise to remain

in full force and virtue.

In testimony whereof the said William H. Plummer, George W.

Morse, and Samuel P. Teele have hereunto subscribed their hands

and affixed their seals the day first above written.

WILLIAM H. PLUMMER, [1.8.]

45 Greene St., Cambridge, Mass.

GEO. W. MORSE, (x. 8.]

28 State St., Boston, Mass.

SAMUEL P. TEELE, [1. s.]

88 Washington St., Cambridge, Mass.

Signed, sealed, and delivered in presence of—

LEON F. CHAMELIN,

To W. H. P., G. W. M.,5S. P. T.

(Two seals to each signature.)

STATE OF sign agai

County of Middlesex,

Personally appeared before me, a justice of the peace in and for

said State of Massachusetts, the said George W. Morse and Samuel

P. Teele, who signed the above obligation, and who made solemn

oath that they are each worth five thousand dollars over and above

GEO. W. MORSE.

SAMUEL P. TEELE.

Sworn to and subscribed, as above written, before me this 17th day

of May, 1883.

LEON F. CHAMELIN,

Justice. of the Peace.

13 Orrice oF THE U.S. Crrevit Covrt,

District oF ConnecTICcUrT,

Hartroxp, May 18, A. D. 1883.

[ hereby certify that George W. Morse, one of the sureties who

have signed the foregoing bond, is known to me as a resident of

Newton, Massachusetis, and a citzen of the United States, and that

I believe them to be amp! Y sufficient security for the amount thereof,

and that the bond is gooc :

E. E. MARVIN, Clerk, ee.

WILLIAM H. PLUMMER, ADM’R, &C., VS.

DistTRIcT OF CONNECTICUT, HarrtrorD, May 18, 1883.

The above and foregoing bond is approved and the appeal allowed.

: N. SHIPMAN, |

Mstrict Judge.

14 United: States Circuit Court, District of Connecticut. In |

Equity.

Wi1t.1AM H. PLumMer, Administrator of Hiram Tucker, : |

v8.

SARGENT & CoMPANY. i

By the Honorable Nathaniel Shipman, one of the judges of the cir-

cuit court of the United States for the district of Connecticut, to

Sargent & Company, Greeting:

Whereas William H. Plummer, of Cambridge, in the district of = *

Massachusetts, as he is administrator of the estate of Hiram Tucker, ;

complainant of the original bill of complaint, now deceased, having

now appeared as a party plaintiff in the suit, by his bill of revivor

hereinbefore filed, hath lately appealed to the Supreme Court of the

United States from the final decree lately rendered and entered in

the above cause in favor of you, the said Sargent & Co., and hath

tiled the security required by law, you are therefore cited to appear

before the said Supreme Court of the United States, at the

15 city of Washington, in the District of Columbia on the second

Monday of October, A. D. 1883, to do and receive what may

appertain to justice to be done in the premises.

Given under my hand, at the city of Hartford, in the district of |

Connecticut, in the second circuit, this 18th day of May, A. D. 1883.

N. SHIPMAN, :

One of the Judges of the Circuit Court

for the District of Connecticut.

New Haven, May 18, 1883.

Service of the foregoing citation is hereby acknowledged.

JNO. S. BEACH,

Sol’r for Sargent & Co.

16 The Return of the Judges of the Circuit Court of:the United States

for the District of Connecticut to the foregoing Appeal.

The bill, answer, and pleadings, evidence and proceedings whereof

mnention is therein made, follow in these words, viz:

Hiram Tucker

v. >In Equity.

SARGENT & Company. J

Be it remembered that heretofore, on the 6th day of January, 1880,

there was filed in this court a bill of complaint;in the following :

words, viz: :

SARGENT & COMPANY.

17 Bill of Complaant.

Circuit Court of the United States, District of Connecticut. In Equity.

Hiram Tucker vs. SARGENT & ComPANy.

To the honorable the judges of the circuit court of the United States

for the district of Connecticut :

Hiram Tucker, of Boston, in the district of Massachusetts, brings

this his bill of complaint against Sargent & Company, a corporation

organized under the laws of the State of Connecticut and located

and doing business in the city of New Haven, in said State.

And thereupon your orator complains and says that he, being the

original and first inventor of a new and useful manufacture of iron

ornamented in imitation of bronze, and of the process for producing

the same, fully described in the letters patent hereinafter mentioned,

which manufacture and process had not been known or used before

his said invention thereof, and which had not been, at the time of

his application for letters patent therefor, as hereinafter set forth, in

in public use or on sale with his consent or allowance for the space

of two years, and being also a citizen of the United States, did, on

the fifteenth day of December, A. D. 1863, upon due application

therefor, obtain letters atent of the United States in due form of

law, under the seal of the Patent Office of the United States, bearing

date the day and year last above mentioned, signed by the Secretary

of the Interior and countersigned by the Commissioner of

18 Patents of the United States, whereby there was granted to

your orator, his executors, administrators, and assigns, for

the term of seventeen years from the date thereof, the full alenien

ive right and liberty of practising said process for ornamenting

iron in imitation of bronze as set forth in said letters patent.

And your orator further shows that said letters patent, and all

rights and interests in or pertaining to the same, were, on or about

the third day of March, A. D. 1865, by an instrument in writing of

that date, duly assigned by your orator to the firm of Tucker & Com-

pany, which firm then consisted of your orator and one Thomas J.

Fisher, and that thereafter, to wit, on or about the twenty-ninth day

of March, A. D. 1866, said letters patent were, by an instrument in

writing of that date, duly assigned by said firm of Tucker & Cotmn-

any to the Tucker Manufacturing Company, a corporation organ-

ized under the laws of the Commonwealth of Massaghusetts and

having its usual place of business in Boston, in said Commonwealth,

both of which instruments of assignminent were duly recorded in the

Patent Office of the United States, as by the saine or by certified

copies thereof in court to be produced will fully appear.

And your orator further shows that said letters patent being in-

operative by reason of a defective specification, through inadvertence,

accident, or mistake, the same were duly surrendered; and, upon

proper proceedings being bad, new letters patent for the same inven-

tion were issued by the Commissioner of Patents of the United States

to the said Tucker Manufacturing Company, as the assignee of your

orator, which said reissued letters patent were in two divisions, each

6 WILLIAM H. PLUMMER, ADM’R, &C., VS.

upon a separate amended specification, bearing date Sept. 11, A. D.

1866, and numbered respectively reissued letters patent No. 2355

and No. 2356, signed by the Secretary of the Interior and counter-

signed and sealed with the seal of the Patent Office of the United

States by the Commissioner of Patents, whereby there was granted

to the said Tucker Manufacturing Company, its successors and

assigns, for the residue of the term of seventeen years from the date

of said original and surrendered letters patent, the full and exclusive

right and liberty, not only of practicing said process, but of

19 making, using,and vending to others to be used, the said manu-

facture, as by said reissued letters patent or duly certified

copies thereof in court to be produced will fully appear.

And your orator further shows that on the twenty-seventh day of

August, A. D. 1872, the said Tucker Manufacturing Company, by

an instrument in writing of that date, reassigned to your orator said

reissued letter patent Nos. 2355 and 2356, and ail rights and privi-

leges thereby secured, which written assignment was duly recorded

in the Patent Office of the’ United States, as by said instrument or a

duly certified copy thereof in court to be produced will fully appear.

And your orator further shows that afterwards, to wit, on or

about June 20th, 1876, by an instrument in writing of that date, he

assigned both said reissued letters patent to Walter Curtis and

Charles M. Reed, both of said Boston, as collateral security for the

payment of certain indebtedness of your orator to them, and that on

or about Jan. 29th, A. D. 1877, the said Walter Curtis having in the

meantime deceased, and Benjamin R. Curtis having been duly

appointed adiministrator of his estate, the said reissued letters patent

and invention, and all rights of action and claims for damages and

profits arising out of infringements upon said letters patent accruing

after the said 27th day of August, 1872, were reassigned to your

orator by said Charles M. Reed and said Benjamin R. Curtis, the

latter acting as administrator as aforesaid, which instrument of

assignment was duly recorded in the Patent Office of the United

States, as by the same or a duly certified copy thereof in court to be

produced will fully appear. :

And your orator avers that, by reason of the above-mentioned

assignments, not only said reissued letters patent and invention, but

also ali rights of action and claims for damages and profits arising

out of infringements upon the same committed since the said twenty-

seventh day of August, 1872, have become and now are fully vested

in your orator. :

And your orator further shows that on or about the third day of

August, 1874, he filed his bill in equity in the clerk’s oftice of this

honorable court for the district of Massachusetts against the said

Tucker Manufacturing Company, alleging that said Company

1) had, since its assignment of said letters patent to him, in-

fringed upon the exclusive rights vested in him by said re-

issued letters patent No. 2355, by practicing the process for orna-

menting iron in imitation of bronze therein described ; that said

cotmpany appeared and answered, denying that your orator was the

original and first inventor of said patented process, denying the

SARGENT & COMPANY. 7

validity of said letters patent, and denying that it had infringed the

same; that a general replication having been filed, and a great

amount of testimony having been taken in support of the issues

raised by the pleadings, the said cause was fully argued by counsel

upon the pleadings and evidence before the Hon. Nathan Clifford,

associate justice of the Supreme Court of the United States, who

thereupon decreed that the said letters patent were good and valid,

and that the said Tucker Manufacturing Company had _ infringed

the same, and also that said company should be perpetually en-

joined from further practising said patented process, and should

account for and pay over to your orator the gains and _ profits re-

ceived by it through such infringements, as well as the costs of suit

by him incurred, which decree was not appealed from, and was

sutistied by the issuance and Service of the writ of injunction therein

granted, and the payment by said company to your orator of the

sum of five thousand dollars in cash, in satisfaction of said profits

and costs of suit, all of which will fully appear from the record in

said suit now upon the files of this honorable court ut said Boston.

And your orator further shows that afterwards, to wit, on or about

April 24th, 1877, he filed his bill in equity in the clerk’s office of the

circuit court of the United States for the district of Connecticut,

against P. & F. Corbin, a manufacturing corporation organized

under the laws of the State of Connecticut, alleging infringement by

said P. & F. Corbin of said reissued letters patent No. 2355, to which

said P. & F. Corbin pleaded that it had done the acts complained of

under and by virtue of a license granted to it by the owners of said

letters patent; that issue being joined upon this plea and testimony

taken, the cause was fully argued by counsel before the Hon.

Nathaniel Shipman, one of the judges of said court, who thereupon

decreed that said noaendied license was null and void, that

21 said letters patent were good and valid, and thatsaid P. & F.

Corbin had infringed the same, and that said P. & F. Corbin

be perpetually enjoined from practising said patented process, and

that it account for and pay over to your orator the gains and profits

received by it through such infringement and his costs of suit, which

decree is still in full force, and the accounting therein directed still

pending.

And your orator furtber shows that on the 5th day of July, 1879,

he fiied his bill in equity in the clerk’s office of this court for the

district of Massachusetts against Charles A. Burditt.and Joseph

Williains, of Boston, alleging infringement by them of both the

letters patent aforesaid, and, after full argument by counsel upon

the question of the validity of said letters patent reissue No. 2356

for said bronzed iron as a new article of manufacture, before Hon.

John Lowell, judge of said court, an injunction was granted against

said Burditt and Williams enjoining and restraining them from in-

fringing either of said letters patent until further order of court,

which injunction is still in full force and effect.

And your orator further shows that the new manufacture of iron,

ornamented in imitation of bronze, specifically described and claimed

as new in said reissued letters patent No. 23™, is the specific product

8 WILLIAM H. PLUMMER, ADM’R, &C., VS.

of the process therein described and specifically claimed as new in

said reissued letters patent No. 2355, and cannot, to the best of his

knowledge and belief, be produced by any process not substantially

thesame. He therefore submits that the effect of the above-mentioned

decrees against said Tucker Manufacturing Company and said P. &

F. Corbin and said Burditt & Williams is not only to establish the

novelty of said process and the validity of said reissued letters patent

No. 2355, but a to establish the fact that your orator was the origi-

nal and first inventor of said new manufacture of iron specifically

claimed in said reissued letters patent No. 2356 as aforesaid.

And your orator further shows that from and after the said twenty-

seventh day of August, 1872, he was and still is possessed of the ex-

clusive right and liberty of making, using, and vending to

22 others iron ornamented in imitation of bronze by the process

described in said reissued letters patent, which exclusive

right and liberty has been and still would be of great value to your

orator but for the tortuous acts of the defendant hereinafter specified ;

yet the defendant, the said Sargent & Co., well knowing the premises,

without your orator’s consent and in violation of the exclusive rights

conferred upon him by said reissued letters patent, has, since said —

last-mentioned date, not only used and sold large quantities of iron

ornamented in imitation of bronze by the process described in said

letters patent, but has practised said process extensively in the manu-

facture of various kinds of ironware, and still continues so to do,

whereby the said defendant has infringed and is still infringing the

exclusive rights intended to be secured to your orator by said re-

issued letters patent.

And your orator has requested the said defendant to acknowledge

his rights in the premises and desist and refrain from further in-

fringement upon said letters patent, and to account for and pay over

to your orator what is justly due him on account of such infringe-

ments; but the said defendant has refused and still refuses so to do.

All of which acts and doings of said defendant are contrary to

equity and good conscience and tend to the manifest injury of your

orator in the premises ; Gate.

To the end, therefore, that the said defendant may, if it can show

cause why your orator should not have the relief herein prayed, and

may, upon oath of its proper officers, and according to the best of

their knowledge, remembrance, information, or belief, full, true, and

perfect answer make to all and singular the premises. ye:

And that the said defendant may be decreed to account for and

pay over to your orator all gains and profits realized by it from the

unlawful use by it of said invention as aforesaid in the manufacture

and sale of iron ornamented in imitation of bronze by said patented

process ; :

And that said defendant, its agents, attorneys, clerks, servants,

and workmen, may be restrained by a writ of injunction, issuing out

of and under the seal of this honorable court, from using said

23 patented process or any substantial and material part thereof,

and from using or selling iron ornamented in imitation of

bronze by said process, and that it may also be restrained and en-

~

4

- | aii . > ”

of Ne Sta yee a. sete.

— pon = oe

; #

SARGENT & COMPANY. 9

joined during the pendency of this suit, and for such other and

further relief in the premises as the nature of the case may require,

and to your honors may seem meet.

May it please your honors to grant unto your orator not only

writs of injunction conformable to the prayer of this bill, but also a

a writ of subpoena, directed to the said defendant, Sargent and Com-

pany, commanding it at a certain penalty therin to be limited by

its pee officers, to be and appear before this honorable court, then

and there to answer unto this bill, and to do and receive what your

honors shall deem meet in the premises.

HIRAM TUCKER.

: : CHAS. M. REED.

Solicitor and of Counsel for Complainant, Boston, Mass.

UNITED STATES OF AMERICA,

District of } -

| Boston, Jan. 5, 1880.

Then personally appeared the above-named Hiram Tucker, and

subscribed the foregoing bill, and made oath that the statements

therein made as of his own knowledge are true, and that those made

upon information and believe he believes to be true.

Before me—

[NOTARIAL SEAL.] | J. A. L. WHITTIER,

Notary Public, Suffolk Co., Mass.

234 And on the same day a writ of subpcena issued out of

court, directed to the said defendant, which was duly served

and returned, and which, with the return of service endorsed thereon,

was and is in the words and figures following, viz:

24 The President of the United States of America to the marshal

[seaL.] of the district of Connecticut, sendeth Greeting:

You are hereby conmanded to summon Sargent & Company, a

corporation organized under the laws of the State of Connecticut,

and located and doing business in the city of New Haven, in the

State and district of Connecticut, to appear before the judges of the

crceuit court of the United States of America for the district of Con-

necticut, in the second circuit, in equity, on the first Monday of Feb-

ruary, 1880, wheresoever the said court shall then be, to answer a

bill of complaint exhibited against said Sargeht & Company in said

court by Hiram Tucker, of Boston, in the district of Massachusetts,

and then and there to answer the same,and todo and abide by

what said court may order and decree in the premises.

Make due service and return at least twenty days before said first

Monday of February, 1880. |

Witness the Hon. Morrison R. Waite, Chief Justice of the Su-

preme Court of the United States, at Hartford, this 6th day of Janu-

ary, A. D. 1880.

E. E. MARVIN, Clerk.

The defendant is required to enter its appearance in said cause

2—378

10 WILLIAM H. PLUMMER, ADM’R, &C., VS.

in the clerk’s office of said court, on or before the day at which this

writ is returnable, or, by the rules of said court, said bill will be

taken as confessed. :

E. E. MARVIN, Clerk.

WM. WALDO HYDE, Hartford, Conn., |

Complainant’s Solicitor.

25 UNITED STATES OF AMERICA.

DisTRICT OF CONNECTICUT, | .. .

New Haven County, — f **’

New Haven, Jan’y 8, 1880.

Then and there I served the within writ on Sargent & Company:

herein named, by delivering to and leaving with C. L. Baldwin, the

secretary of said company, a true and attested copy hereof.

Attest : JOS. D. BATES,

U. S. Marshal.

26 And on the same day Wm. Waldo Hyde, Esq., entered his

appearance for the complainant; and on the 26th day of Jan-—

uary, 1880, John S. Beach, Esq., entered his appearance for the re-

spondents; and on the 2d day of March, 1880, the respondents filed

in court their answer in the words and figures following, viz:

27 Defendants’ Answer. (Filed March 2, 1880.)

Circuit Court of the United States, District of Connecticut. In Equity.

Hrram Tucker v. SARGENT & Co.

The answer of Sargent & Company, defendants, to the bill of com-

plaint exhibited against them by Hiram Tucker.

To the honorable Judges of the circuit court of the United States for

the district of Connecticut:

The defendants, reserving all advantage and benefit of exception

to said bill of complaint, for answer thereto or to so much thereof

as they are advised it is material for them to answer unto, answer-

ing, say: .

Phat they are informed and admit that letters patents of the

United States were on the the 15th day of December, 1863, issued to

the complainant for an alleged invention in the art of coloring iron,

and that the same was afterwards surrendered and reissued in two

parts, as alleged in said bill, and numbered respectively 2355 and

2356; but the defendants have no knowledge, save as is imparted to

them by the allegations of said bill, of the assignments of said original

Poon SS

SARGENT & COMPANY. 11

letters patent, or of said reissues, or of either of them, and leave the

complainant to the proof thereof, and they have no knowledge, except

as derived from the allegations of said bill, of the institution, prog-

ress, or result of the several suits which said bill alleges have been

brought by the said complainant against “The Tucker Manufactur-

ing Company” and Burditt & Williams in the United States cir-

cuit court for the district of Massachusetts, and against P. F.

28 Corbin, in the United States circuit court for the district of

Connecticut, and leave the complainant to such proof thereof

as he may be advised; but, upon information and belief, they deny

the allegation of said bill that the coloring of iron, as described and

claimed in said reissued letters patent, cannot be produced by any

process other than that therein described; and they deny that the

effect of any decree in either of the above-mentioned cases was to

establish the validity of said letters patent as against these defend-

ants, or to abate their rights. |

And these defendants, further answering, admit that the said orig-

inal letters patent issued to the said complainant, and bearing date

December 15, 1863, were inoperative a void by reason of a defect-

ive specification, as set forth in said bill, in that the specification

was vague and uncertain and defined no limits as to quantity of oil

or the thickness of the coating to be applied, and gave no such clear

direction as to the application or use of the alleged new process as

to enable a person skilled in the art to which it relates to practise

the same; but, upon information and belief, they deny that the said

original letters patent were for that reason surrendered, but on the

contrary they allege that the said surrender was made and said _ re-

issue obtained for the purpose of covering, as the invention of the

complainant, what was not described or claimed in said original

letters patent as the invention of said complainant, and they aver

that said reissued letters patent are void:

Ist. As exhibiting the same vagueness and uncertainty of descrip-

tion which nullified said original letters patent.

2d. As being for a different invention from that described and

claimed in the said original letters patent.

3d. As purporting to secure exclusive rights which, in their

nature, are not patentable.

And the defendants, further answering, deny that they have used

the process described in said letters patent, or sold any articles of

iron colored thereby; and if it shall be claimed by the said com-

plainant that these defendants have, in the process of coloring iron

used by them, infringed upon any of the exclusive rights ‘tay vort-

ing to be secured by said letters patent, then the de badeieti

29 will maintain that upon any construction thereof covering

the process used by the defendants in coloring iron said let-

‘ters patent are void:

Ist. Because such process was in public use, and the articles col-

ored thereby were on sale in this country, with the knowledge and

consent of the said complainant, more than two years prior to his

application for said letters patent. 7

1. Because such process was in public use and the articles col-

nthe 0

12 WILLIAM H. PLUMMER, ADM’R, &C., VS.

prior to the application for said letters patent.

3d. Because the said Hiram Tucker was not the first and original

inventor of said process, but the alleged invention, including all

such portions thereof as the defendants are alleged to have infringed,

was at the date of the supposed invention an old process well known .

in the art of coloring metal, and long prior to any supposed invention

thereof by the said Tucker, and Jong prior to his application for

letters patent thereon, was known to and in use by persons other

than the said Tucker, whose names and residences and the piaces

where used by them respectively are set forth in schedules hereto

annexed, marked A and B, and forming part of this answer, and

was also fully described in certain public works and letters patent,

as set forth in schedule hereto annexed, marked C, and forming part

of this answer. 7 }

SCHEDULE A.

Name. Residence. Place where used.

Purmont & Bradford----- .--- New Haven, |

Peck & Walter M’fg Co._----- New Britain,

5 BO non ienivnin cn cnnn New Haven, New Brita;

J. B. Sargent & Co.......... vine, fh UC! CO

Sargent & Co. ...--.-...----. New Haven,

Fred’k W. Brockseipier -.-.-. North Haven, |

Misahet GE 6 cidic cacesnnn Wallingford, | Wallingford and

ee SR ae cisicin: sci e ieimaccon New Britain, § New Britain.

ou SCHEDULE Bb.

James G. Smith, J. C. Smith, Paul Schieltze, Edwin R. Augevine,

and Joseph Flyun, all of Middletown, Conn., at said Middletown and

Westfield, in said State; Frederick Mallory, of New Haven, in said

State, at said New Haven; W. Fitch and John Gusel, of and at said

New Haven; H. L. Judd, of Wallingford, at said New Haven and

Wallingford Conn.; Rodolphus L. Wett, Horace Eddy. Russell &

Erwin Manufacturing Company, and Landers, Frary & Clark, of

and at New Britain, Conn.; Henry Whitely, of Cambridge, Mass.;

Luther F. Whitney, of Charlestown, Mass.; Edmund W. Drake, of

Somerville; Robert Murphy, of Chelsea; Frederick Smith, of Somer-

ville, and John W. Talbot, of Charlestown, all in said district of

Massachusetts, at Boston, in said district; Nathaniel Bradlev, Walter

Hubbard, Lewis J. Roselins, Abel H. Snow, Elias K. Breckenridge,

and Hugh Mulvey, all of and at Meriden, in the State of Connecticut:

Joha M. Spring, Charles Peck, both of and ai New Britain, Conn.:

Burton Mallory, William Ronalds, William H. King, William Leboyd,

Samuel Barton, Daniel Wright, and Henry Talmadge, all of and at

New Haven, in the State of Connecticut; Charles M. Daboll, G. A.

W. Rogers, William Clark, B. F. Barker, E. H. Douglass, Increase

Wilson, and the Wilson Manufacturing Company, all of and at New

London, Conn.; Henry H. Elwell, of Sate Conn., at said Nor-

walk aud Meriden; Emory Parker, of New Britain at Meriden and

ored thereby were on sale in this country for more than two years

es

* ”

~OOMe @

SARGENT & COMPANY. 13

New Britain, and Daniel Fowler, of Meriden, Conn., at said Meriden;

Lemuel Morgan, of New York city, at said Meriden; Richard

Eatabrook, of and at Camden, in the State of New Jersey ; Horace

M. Hedden and George M. Hedden, both of and at Worcester, in

the State of Massachusetts, and Newark, New Jersey; Luther Grover,

J.& J. Berry, William Park, John E. Blakemore, all of and at Boston,

in said State of Massachusetts.

31 SCHEDULE C.

On pages 181 and 182 of a book entitled “A Narrative of the

Building, and a Description of the Construction of the Eddystone

| er yeh sag with Stone, * * * by John Smeaton,” etc., published

at Li

ndon, 1813; and also on pages 559 and 560, in an article headed

“Japanning,” beginning on page 7 and ending on pase 12 of vol-

ume II of a work in two volumes, entitled “The Engineers’ and

Mechanics’ Enclyclopedia, * * * by Luke Herbert,” etc., pub-

lished at London, 1842; and, also, on pages 467 to 474, inclusive, of

tle first volume of a work printed in the German language, entitled

“Handbuch der Mechanischen Technologie, * * * von Karl

Kammarsch,” which, being translated, is “Manuel of Mechanical

Technology, * * * by Karl Kammarsch,” published at Hanover,

1857 ; “ Enclyclopedia of Useful Arts, Mechanical and Chemical,”

edited by Charles Tomlinson, and published in two volumes at

London and New York, 1854. On page 384 of the second volume is

an article beginning on page 382 and headed “ Pens.”

The defendants reserve the right to add to and amend said

Schedules A, B, and C, within the period limited by law for that

purpose, and they pray that they may have the same advantage of

the facts hereinbefore stated, and the same benefit of the allegations

of this answer, as if the same had been specially pleaded ; and they

deny that any matter or thing in said complainant's bill contained,

and not herein and hereby well and sufficiently answered, is true to

the knowledge and belief of the defendants; and they pray to be

hence dismissed, with their reasonable costs and charges.

| SARGENT & CO.,

3 By J. B. SARGENT, President.

JNO. S. BEACH,

Solicitor and of Counsel.

32 Usirep States or AMERICA, |

District of Connecticut,

| New Haven.

On this first day of March, 1880, before me comes Joseph B. Sar-

gent, who, being duly sworn, dceposes and says that he is the presi-

dent of the corporation Sargent and Company ; that he knows the

contents of the foregoing answer, and that the matters therein set

forth, so far as they are stated to be within the knowledge of the

defendants, are true, and as to all other matters therein set forth he

believes them to be true.

JOHN B. MILLS,

Notary Public.

BSS >is

14 WILLIAM H. PLUMMER, ADM’R, &C., VS.

Anda on the 3rd day of April, 1880, the complainant filed in court

his replication to said answer in the words and figures following,

Viz:

33 Complainant’s Replication.

Circuit Court of the United States, District of Connecticut. In Equity.

aa Hiram TUCKER v8. SARGENT & Co.

aaa This repliant, saving and reserving to himself all and all manner

aw of advantage of exception which may be had and taken to the mani-

aa fest errors, uncertainties, and insufficiencies of the answer of the said

defendant, for replication thereunto say that he does and will aver,

maintain, and prove his said bill to be true, certain, and sufficient

in the law to be answered unto by the said defendant, and that the

at answer of the said defendant is uncertain, evasive, and insufficient

aa in the law to be replied unto by this repliant, without this, that any

ai other matter or thing in the said answer contained material or

effectual in the law to be replied unto, and not herein and hereby

well and sufficiently replied unto, confessed or avoided, traversed or |

denied, is true; all which matters and things this repliant is ready 4

———

| to aver, maintain, and prove as this honorable court shall direct,

and humbly prays, as in and by his said bill he has already prayed.

an By his solicitor, CHAS. M. REED.

a WM. WALDO HYDE,

Solicitor of Record.

334 And on the 20th day of November, 1880, the defendant

filed an amendment to his answer, in, the words and figures

following, viz: /

fh 34 Amendment of Answer. (Filed Nov. 20, 1880.)

United States Circuit Court, District of Connecticut. In Equity.

HrramM TucKERv. SARGENT & Co.

The defendants, in pursuance of leave of court for that purpose,

amend their answer as on file by inserting between the paragraph

of said answer (No. 3), which contains a reference to sahelialen A, B,

and C, and said schedules, as follows:

“4. Because that long prior to the supposed invention of said

Tucker articles of iron bronzed by process claimed in said patent

were manufactured by Wilhelm Graff, Gottich A. Erhardt, Otto

North, Heinrick Holsmuller, all of Berlin, in the Kingdom of Prus-

sia, at said Berlin: E. C. Zimmerman, of Frankfort-on-the-Rhine, at

said Frankfort, and at Hannan, in the Kingdom of Prussia, the Royal

of Berlin, in the Kingdom of Prussia, at said Berlin, and

were imported into the United States and known to and used and

sold by the following-named persons and firms at the city of New 4

Si

ech Oa oo a RM a BE MSI RN

at ie . :

haere See

York :

Se MEE IID a et tg ee te

SARGENT & COMPANY. 15

C. F. A. Henricks, of No. 367 Henry street, in the city of Brook-

lyn, New York. :

Hartley & Graham, and Schuyler, Hartley & Graham, of the city

of New York.

Stephen Pell, of 148 Main street, Brooklyn, New York.

John Wilcox, of No. 73 Christopher street, New York city.

L. I. Kalemberg, of 125 Fulton street, city of New York.

Dated at New Haven, November 19, 1880.”

SARGENT & CO.,

By J. B. SARGENT, President.

JNO. S. BEACH,

Solicitor and of Counsel.

35 Sworn to as being true to the best of his knowledge, infor-

mation, and belief, by Joseph B. Sargent, president of said

Sargent & Co. |

CHAS. L. BALDWIN,

Notary Public.

35} And on the 15th day of June, 1881, complainant’s and de-

_fendants’ evidence was filed in the words and figures follow-

ing, Viz:

36 In the Circuit Court of United States for the District of

Connecticut.

HrraM Tucker v. SARGENT, ce.

Evidence for complainant, taken pursuant to the sixty-seventh rule

of the Supreme Court of the United States, in equity, as amended,

before me, John C. Lane, special examiner.

Oct. 12, 1880,

(Hiram Tucker, being first duly sworn, in answer to direct ex-

amination by Elihu G. Loomis, Esq., of counsel for complainant,

saith as follows :)

Question 1. What is your name, age, residence, and occupation ?

Answer. Hiram Tucker; age 57; reside in Boston; manufacturer.

Q. 2. Are you the complainant in this case?

A. I am.

(Examination suspended.)

Complainant offers in evidence a certified copy of reissued

37 letters patent of the United States, number 2355, granted to

the Tucker Manufacturing Company, dated September

eleventh, 1866, for “ Improved Process of Bronzing or Coloring Iron,”

marked Tucker “Exhibit A A, John C. Lane, Spec. Ex'r;” also a

certified copy of reissued letters patent of the United States, number

2356, granted to the Tucker Manufacturing Company, dated Septem-

ber eleventh, 1866, for “ Improved Manufacture from Iron in Imita-

tion of Bronze,” marked “Tucker Exhibit B, John C Lane, Spec.

Ex’r;” also a certified copy of an assignment of said patents from

16 WILLIAM H. PLUMMER, ADM’R, &C., VS.

said Tucker Manufacturing Company to said Tucker, dated August

twenty-seventh, 1872, recorded libro A 18, page 454, of Transfers of

Patents in the Patent Office of the United States; also a certified

copy of an assignment of said patents from said Tucker to Walter

Curtis and Charles M. Reed, dated June twentieth, 1876, recorded

libro V 20, page 175 of said Transfers of Patents; also a certified

copy of an assignment of said patents from Benjamin R. Curtis, as

administrator of the estate of Walter Curtis and Charles M. Reed,

to said Tucker, dated January twenty-seventh, 1877, recorded libro

H 21, page 282 of said Transfers, marked “Tucker Exhibits C,

John C. Lane, Spec. Ex’r;” also three buts, marked “ Tucker Exhibit

A, Feb’y 25, 1880, Geo. L. Huntress, Notary Public” —* ‘Tucker Ex-

hibit D, John C. Lane, Spec. Ex’r;” and “Tucker Exhibit D D,

John C. Lane, Spec. Ex’r;” and said counsel for complainant states

that if the defendants do not admit that said Exhibits A and D and

D D are goods manufactured and sold by them, evidence of such

manufacture and sale will be hereafter offered.

(Examination resumed.)

Q. 3. Please state briefly what degree of familiarity you have

with the use of oils and varnishes and with the various processes

for ornamenting iron in common use.

A. I have had more than thirty years’ experience in using these

substances for the purpose of covering and ornamenting iron by

means of heat. I have also had large experience in the manufacture

of japans and varnishes. :

38 d 4. What practical experience have you had in the use

of the process described in the letters patent here in suit ?

A. I have had more or less experience in making Tucker bronze

for eighteen years and consider, myself thoroughly versed in every-

thing that relates to that process.

Q. 5. What practical experience have you had of the effects of

different degrees of heat on oils, varnishes, and japans, when spread

upon metallic surfaces?

A. More than thirty years’ experience in the use of those sub-

stances for covering iron by means of heat.

Q. 6. Will you examine these exhibits, marked Tucker Exhibits

“A,” “D” and “DD,” in this cause and state whether or not they

~ are substantially the same as the bronzed iron described and claimed

in your patents in suit?

A. I consider them to be substantially the same thing.

Q. 7. Will you give your reasons for such opinion ?

A. This pair of butts, Exhibit D, appear, after being fitted and

while in the rough state, to have been coated over with either a

strong boiled oil or a thin coating of brown japan and then sub-

mitted to a degree of heat sufficient to solidify the same and modify,

to some degree, its color. The face of the butts then appear to have

been ground and smoothed by a fine emery wheel. The butt was

then placed in a furnace heated sufficiently to raise a dark brown

color upon the surfaces so ground or smoothed The butt, after

being removed from the oven and cooled, appears to have had ap-

pm

es

ww

=

a

ca

he ns an, li

iis O "RIDA 2 oN ee ms Wage ¢:

SARGENT & COMPANY. 17

plied to it a thin coating of oi] copal varnish. After such coating

of varnish was applied it appears to have been replaced in the oven,

previously heated to a high degree of heat, and there remained

until the varnish became solidified and modified in color, after

which it was removed and was then completely finished, ready for

the market. Although this process consists of two stcps instead of

one, as deccribed in the patent, I consider it substantially the same

for the reason that it produces the same result, to wit, a surface on

-

ee the iron which is composed of oxidized or modified oil, or

; 39 oil varnish (which is the same thing for the purpose of prac-

a) ee tising this invention), and oxidized iron, both produced by

means of heat. The same remarks will apply to Exhibits D D and A.

Q. 8. Are you or not, from your knowledge of the art of ornament-

4 ing iron, enabled to say positively that the three exhibits just re-

4 ferred to were ornamented by substantially the process which you

# have described ?

A. Iam.

Fi Q. 9. Have you read that portion of the affidavit of Henry B.

/ Sargent before filed in this case which describes the process em-

| ployed by Sargent & Company in the finish and ornamentation of

| butts?

A. I have.

Q. 10. Whether or not said affidavit confirms your opinion that

y these goods were finished by substantially the same process as that

described and claimed in your patents in suit?

A. Yes, for the reason that the process he has described for color-

ing and covering the ground surfaces of his butts is substantially

the saine as I have described as being practised on Exhibits D, A,

and DD, and I have testified already that that process is substan-

: tially the same as is described in my patents here in suit.

VW Q. 11. Will you prepare a piece of Tucker bronze, following

F strictly the specifications of your patents, and produce it at the time

he? Som and se to which this examination shall be adjourned ?

A. I will.

(Examination suspended.)

Complainant offers in evidence a certificate of the appointment

of Benjamin R. Curtis as administrator of the estate of Walter

Curtis, under the seal of the probate court of Suffolk county, in the

Commonwealth of Massachusetts, marked “ Exhibit E, John C.

Lane, Spec. Ex’r.”

Oct. 13, 1880.

40 Complainant puts in evidence a speciinen of Tucker bronze,

as promised in his eleventh answer, marked “ Tucker Ex-

hibit F, John C. Lane, Spec. Ex.”

(Examination resumed.)

(And in answer to cross-examination by C. E. Mrrcnusy., Esq_., of

counsel for respondents, saith as follows :)

Cross-question 1. State whether the title exhibits placed in evi-

J—378

pied AYO OPS irae yy

is lan) sy See he

24. OS a hae ot Weg g.-"- _ entafii * a

Rg Sth UE IM AK Tp EBON. GRRE RNSY LI BORDA Lot

ON ee ad “

_ ee ee ae eer enn

oN eebiihahiitianisentied AONE ORIN ee AL ALD DR a atte erm PRE OEE TELA EM 5. oe Mla pio =

SPARES stag Py BB

18 / WILLIAM H. PLUMMER, ADM’R, &C., VS.

dence in connection with your testimony constitute all the contracts

to which you are a ie relating to the letters patent in contro-

versy, or to rights of recovery, or to moneys recovered under the

same.

A. To the best of my knowledge and belief, yes.

Cross-Q. 2. Have you not signed a contract of the kind referred

to in the last question since the date of the last deed contained in

‘Tucker “ Exhibit C”*’

A. I have.

Cross-Q. 3. Will you produce the same, or a copy thereof, for use

in this case?

A. I cannot say whether I will or not until I have consulted my

counsel, Mr. Reed. I understand by the question, however, that it

refers to a contract made between myself and the Tucker Manu-

facturing Company and William H. Plummer, which does not affect

my title to the patent, as I understand it. 3

Cross-Q. 4. Does not the contract that you referred to in your last

answer, and you are right in understanding it to be the one I re-

ferred to, vest in the Tucker Manufacturing Company and William

H. Plummer the whole or part of the title to any money that may

be recovered for alleged infringement in this case?

A. They are entitled to eighty per cent. of the proceeds which

may accrue from any litigation of said patent until their claims

against me are satisfied, said claims amounting, at the time the

contract was made, to some twenty-four or five thousand dollars.

(Counsel for respondent here calls upon counsel for complainant

to produce said instrument or a copy thereof.)

41 Cross-Q. 5. No reply being made to my request for said in-

strument, will you please state fully and in detail every par-

ticular of said instrument?

A. I decline to do so at this time, for the reason that my counsel,-

who has this case especially in charge, is ill and not able to be

present. I see no particular reason why I should not give the

details in regard to this contract, as I have already given the sub-

stance, but not knowing exactly what the effect of a full answer may

be to the last interrogatory, I prefer to wait for Mr. Reed’s advice.

(Counsel for respondent states that, in view of the last answer, he

will defer cross-examination upon this point for the present and

renews his demand for the production of said instrument, claiming

that the legal effect thereof is to vest a titie in equity in the persons

named in answer to cross-question 3.)

Cross-Q. 6. In the deed from the Tucker Manufacturing Company

to you, dated August twenty-seventh, 1872, I find enumerated among

the patents conveyed by said instrument not only the reissues in

controversy, but also letters patent, number 90891, dated June first,

1869, for an improvement in coating articles of ironware. What

was the improvement described in those letters patent?

(Objected to as incompetent and immaterial.)

>|

+ POA PREM >

SARGENT & COMPANY. 19

A. I am not able to state with accuracy just what that patent

related to or, more properly speaking, Just what the improvement

set forth in that patent consisted in. It is many years since I have

read it.

Cross-Q. 7. You were the patentee, I believe, of the last-named

patent, were you not?

(Objected to for same causes.)

A. I was.

‘ross-Q. 8. It related to the use of copal varnish for coating

articles of ironware, did it not? .

(Also objected to for same reasons.)

A. My memory of dates is so defective, and have taken out so

many patents for improvements in finishing iron, that I am

42 notable to state whether this patent under discussion was

the one that related to covering articles that had been

Tucker bronzed with varnish. I remember of taking a patent,

however, for that so-called “improvement.”

Cross-Q. 9. To the best of your knowledge, information and belief,

was not the patent of June first, 1869, the patent taken out by you

for coating with copal varnish articles previously ornamented in

imitation of bronze by oil and heat in accordance with your pre-

viously patented process ?

(Objected to as before.)

A. Ihave no reason to doubt but what that was the fact, but I

cannot swear to it at this moment.

Cross-Q. 10. Assuming that to be true, of which you say in your

last answer you have no reason to doubt its truth, please state

whether I am correct, substantially, in the following statement of

the three inventions referred to in the deed from the Tucker Manu-

facturing Company to you dated August twenty-seventh, 1872:

First. A process of ornamenting iron in imitation of bronze by oil

and heat by removing sand, scale, or other foreign matter, then ap-

plying to the cleansed surface such a thin film of linseed oil, or

equivalent oil, as is best attained by applying the oil with a brush

and then rubbing off the oiled surface thoroughly’ with a rag,

sponge, or other suitable implement, and then —— jt in an oven

where it is submitted toa daases of heat which may be measured

by an intensity sufficient to change a brightened surface of clean

vnoiled iron toa color varying from a light straw color to a deep

blue, then repeating the process if desired.

Second. Analleged new manufacture consisting of iron ornamented

in imitation of bronze by oil and heat in the manner described.

Third. A patent for outer coating with copal varnish articles

ornamented in imitation of bronze, treated by the process before

described.

(Objected to as before.)

A. Yes.

~ CER Mat A ee

"

$

PEALE! SPELL IE AEE NET SEP ELAN NOELIA ED ELMO. SNA LAY IAL LEN INS Hi

i itn ae ante agence so stcslonaet nbeat nore P.3

20 WILLIAM H. PLUMMER, ADM’R, &C., VS.

Cross-Q. 11. Was the third patent referred to in the last

43 question in evidence in the case of Tucker against the Tucker

Manufacturing Company tried before Judge Clifford in this

circuit ?

A. No; it was not.

Cross-Q. 12. Tucker Exhibit F, I understand, is a piece of iron

ornamented in accordance with the process described in your patent

numbered 2355, is it not?

A. It is.

Cross-Q. 13. Please describe in detail the way in which you pro-

duced the surface of Tucker Exhibit F.

A. This Exhibit was first polished on an emery wheel, then oiled

over with boiled linseed oil by rubbing the same on with the finger,

then afterwards rubbing it off with a rag, then placed in a regular

bronzing oven, one end of the exhibit resting upon the bottom of

the oven nearest the fire, and allowed to remain until the color ap-

peared as now seen on said exhibit, with the exception of it being

soinewhat lighter in shade. It was then removed from the oven,

allowed to cool, oiled again in the same manner by rubbing with

the finger, the surplus oil rubbed off with fine tissue paper; the piece

was then replaced in the oven, hung about the centre of the sume

by being suspended on a wire, and allowed to remain for an hour,

more or less, until it assumed the character and appearance now

seen.

Cross-Q. 14. What was the heat to which the oiled iron was sub-

— at each repetition of the process in producing Tucker Ex-

ubit F?

A. Iam _ not able to state specifically. I am sure that at the first

heating the heat used was over four hundred degrees Fahrenheit,

and, according to my best judgment, at the second heating was

about four hundred; might have been some less.

Cross-Q. 15. As I understand you, the heat at the second heating

was sutticient to deepen the color of the iron?

A. I should judge it was.

Cross-Q. 16. And it was sufficient to produce upon clean unoiled

iron the color prescribed by your patent as a test, was it not?

44. . <A. I have no doubt of it.

Cross-Q. 17. Was the effect of your rubbing on the oil with

your finger to fill the pores of the iron somewhat more satisfactorily

than they would have been filled by application with a brush ?

A. I don’t think it made the slightest difference, as the office of

the brush or finger is only to lay on a quantity of oil, which in both

cases is rubbed otf thoroughly with a rag or paper afterward.

Cross-Q. 18. When rubbed off thoroughly with the rag or paper, I

suppose the substantial portion of the oil remaining is in the pores

of the iron, is it not?

A. I never examined the work critically for the purpose of ascer-

taining that fact, but should think from ordinary inspection, after

rubbing off the oil, that it was pretty fairly distributed over the

whole surface.

Cross-Q. 19. And the effect of applying the prescribed degree of

~~

SARGENT & COMPANY. 21

heat to the iron oiled as described is to produce a new surface to the

iron, Is it not? :

A. It is.

Cross-Q. 20. And that surface is a single surface bronze-like in

color as ordinarily oiled and heated, but capable of being made a

black by repetition of oiling and heating without changing the pro-

cess,amI right? _

A. You are.

Cross-Q. 21. Why did you limit the third patent referred to to

outer coating articles of “Tucker bronze” with copal varnish. Why

did you not include all metallic surfaces?

(Objected to as aforesaid.)

A. For the reason when that patent was taken I was inex-

verienced and had but very little knowledge about such matters. I

esas to use varnish after my return from Europe in 1867, when I

found large quantities of work imperfectly done, with a poor quality

of oil, and adopted varnishing said work and heating the same as

an expeditious way to get over the difficulty. I found that the

varnishing had a good effect for cheap work, thought possibly

45 it might be covered by a patent. Causten Browne, Esq., of

Boston, advised me that it was the subject of a patent, and at

his suggestion the claim was broadened beyond what was my judg-

ment at the time, and has always been my judgment since that it

ought to have been—that is to say, it was broadened to cover

simply varnishing without heat. I have never considered the

patent worth a rap on that account.

Cross-Q. 22. Your judginent is and always has been, then, that the

claim should have been limited so as to include the application of

varnish by heat only?

(Objected to as irrelevant, incompetent, and iminaterial.)

A. My judgment is, and has been ever since I have had knowledge

of patent matters sufficient to discriminate between what was pat-

entable and what was not, that there was not the slightest founda-

tion to support any such claim as is put forth in that patent, or any

claim that will relate to varnishing the surface of bright iron and

solidifying or coloring the same by heat, in view of my former

patents.

Cross-Q. 23. You say, in reply to cross-question 21, that at the

suggestion of Causten Browne “the claim was broadened beyond

what was my judgment at the time.” What was your judgment at

the time as to the proper limitation of the claim. Am I right in an-

derstanding that, in your judgment at the time, it should have been

limited to the application of varnish by heat?

(Objected to as before.)

A. I had a vague idea at the time said application was made that

a patent would be valid for baking a coat of varnish over work done

by the Tucker bronze process, so called—that is, that it would be a

combination patent; that was as it lay in my mind at the time.

eorem © ©o eee io

Aer (RRs ee eh

Oe Ie oe ee ee ee ie WS. Ela

re Vie SESS ep ea FPG OM 6 Bien ABM ALL MA oe “eles > hernia *

a tege ee a NR tN SCRE A TNS RAINE ARI AEG AISLE, ARH REN CRIN LH NE AB ENG Cte, LOGE ATALANTA AP ARR MTS RT AO ee ee eee re

oe

Rati

4 “

in

Fae met

22 WILLIAM H. PLUMMER, ADM'R, &C., VS.

Cross-Q. 24. You knew that it had been customary in the arts to

bake copal varnish onto metallic surfaces prior to the date of your

original invention, did you not?

A. If I understand your question to mean placing copal varnish

onto bright metallic surfaces directly and than baking the same,

I did not.

46 Cross-Q. 25. To give a single illustration, you knew that

copal varnish had been baked upon the bright surface of tin

long before the date of your process, as discovered by you, did you

not?

A. I did not.

Cross-Q. 26. Do you regard English brown varnish, applied in

the manner described in your patents in suit, and subjected to the

heat prescribed by said patents, as the equivalent for linseed oil ?

A. I doubt very much whether it would be practical to treat iron

with English brown varnish in the way specified in the patent for

treating the oil; if it could be, it would be within my patent un-

doubtedly.

Cross-Q. 27. If it could not be applied in the precise way pre-

scribed in your patent, would you regard it as an equivalent, say, if

it were applied by diluting it with turpentine or benzine ?

A. I should, for the reason that English brown varnish is com-

posed almost entirely of linseed oil which has been boiled to a paste

and diluted with spirits of turpentine. When a thin coat of this

material is placed over the surface of bright or polished iron, and

then submitted to such a heat as is deseribed in the patent here in

suit, and for a length of time sufficient to raise an oxide or change

of color on the surface of the iron, which shall combine in some de-

gree with the baked brown varnish which was placed upon the iron

previous to its being heated, it constitutes the new surface, or the

distinctive features of this invention.

(Examination suspended.)

(Examination resumed.)

Oct. 22, 1880.

Cross-Q. 28. You say, in reply to question 7, among other things,

“this pair of butts (Exhibit D) appear, after being fitted and while

in the rough state, to have been coated over with either a strong

boiled oil ora thin coating of brown japan.” Are you quite sure

that this first coat did not consist of black japan ?

47 A. I feel quite sure I was right in my statement that you

have just quoted, but I won't say that I am absolutely sure.

Cross-Q. 20. Whichever was the case the maker had a right to use

such coating, I suppose ?

A. He had not a right to use it if the sand and scale had been

removed from this groundwork before applying the coat of boiled

oil or thin brown japan, or a mixture of the two, and heating it in

such a heat as described in the patent. I do not claim it to be an

infringement of my patent if this brown color which appears on the

groundwork of this butt is produced by colored pigments alone.

Cross-Q. 30. Do you understand that more than one coat of either

hs sichaniniiiatliailiieice BE eee a a |

J sepcieniiiiicalisici AE eee iegtteagae eens | ‘

camel oo anew

SARGENT & COMPANY. 23

black japan, or brown japan, or strong boiled oil, as the case may

have been, was used in producing the groundwork of Exhibit D—

I call it black groundwork ?

A. I don’t think there was more than one coat used before the grind-

ing off the salient surfaces.

Cross-Q. 31. Inasmuch, then, as your patent prescribed several

repetitions of the process in order to produce a black, it follows,

does it not, that if a black color was produced on the groundwork

of Exhibit D by a single coat, at a single baking, your process was

certainly not used prior to the grinding of the salient faces ?

A. No, that does not follow. You state that you say that this

groundwork isa black; I do not see it to be so, but should call it

brown, and such a brown as is produced by first removing the sand

and scale by a pickle made from sulphuric acid and water. When a

thin coating of such a material as I have described as being used

on this groundwork in question is placed over a surface so treated,

from which the sand and scale has been removed by pickle, the

result is always the saine as appears on this groundwork in ques-

tion. | "e

_Cross-Q. 32. You understand, do you not, from the affidavit of

Henry B. Sargent, to which your attention was directed, in reply

to question 9, that according to his statement, butts of the

48 defendants’ manufacture are first covered with a black japan ?

A. I do so understand it, and I have not the slightest rae

but what the groundwork of the butt which he put in as an ex-

hibit was done with black japan. It appeared to me so when I

made an examination of said butt. The color and texture of that

groundwork appeared different altogethcer to me from the ground-

work on this Exhibit D. |

Cross-Q. 33. If Mr. Heury B. Sargent’s statement in his affidavit

referred to in question 9 as to the use of black japan for the ground-

work is correct, such use does not involve your process, does it?

A. It does not.

Cross-Q. 34. If, then, the process described by Henry B. Sargent as

to producing the ne does not involve your process, and if,

as you say In reply to question 10, “the process he (Henry B. Sar-

gent) has described fer coloring and covering the ground surfaces

of his butts is substantially the same as I have described as being

practised on Exhibits D A and D D,”—how can the process you have

described as the one by which the groundwork was applied be

within the patent? Can two processes for producing the groundwork

upon butts be substantially alike and one of those processes be

within your patent and the other without your patent?

A. To answer the latter part of your question first, I will say no,

they cannot be substantially alike and vet there be a patentable differ.

ence. As I understand these two groundworks, and I call them two,

because on inspection they appear to be so, the colur on one of them

is produced by the black japan, without regard to the heat, while

the color on the outta wk on these Exhibits D is produced by

the action of heat on the thin coating of boiled oil, or light brown

japan, or a mixture of both, as the case may be, combined with the

pee SE pi a erp SD RL te alae a

e ~ ~ hasten serommuegrntinn

a ‘deg 2 ON Di RAR. CER elie Doe Nee er ee sea eete ies Ss

y . Cog Tee

24 WILLIAM H. PLUMMER, ADM’R, &C., VS.

dark color of the iron left by the pickle. I do not say absolutely

that I am right in the supposition that this groundwork on

49 these Exhibits D is produced as I have supposed, but for the

purpose of this answer I take it for granted that it is so.

Cross-Q. 35. Inasmuch as in reply te question 9 of your direct

testimony you refer to no exhibit made or filed by Henry B. Sar-

gent, and inasmuch as in my cross-examination I have referred to

no such exhibit, and inasmuch as no such exhibit is before us for

inspection or comparison, and inasmuch as I don’t know to what

exhibit you allude and inasmuch as all such exhibits are, or

ought to be, in the clerk’s office at Hartford, you will please excuse

me if I don’t follow you in this digression. Now, to repeat in another

form what I have said, I understand you to say, in reply to question

9, that you have read the affidavit of Henry B. Sargent, before filed

in this case, which describes the process employed by Sargent &

Company in the finish and ornamentation of butts. I understand

you also to have said that, according to his description of that pro-

cess, the groundwork is produced by baking on black japan. I un-

derstand you also to have said that, if the groundwork 1s produced

as hedescribed it, [it] does not involve the use of your process. [ under-

stand you also to say that the process he has described is substan-

tially the same as you have described. How, then, can one be

within the patent and the other without ?

A. To answer the latter part of your question first, I will say

that I never have described or admitted that these two processes

now under discussion were substantially or at all alike. One isa

process for producing color and surface by means of oii and heat

used thinly over iron from which the sand and scale has been.

removed, as I understand it. The other process, to wit, that de-

scribed by Henry B. Sargent in his affidavit, on which you have ex-

amined me (and this exhibit of H. B. Sargent referred to in his

athidavit) consists in a groundword of thick black japan, the iron

underneath forming no part of the color. I have read H. B. Sar-

gent’s affidavit and think I understand the process therein described

fully, and I believe the black japan on ni exhibit is correctly de-

scribed in his affidavit.

50 Cross-Q. 36. You would not be willing to say, would you,

that the pigmenty looking opaque coating on Tticker Ex-

hibit D D where the words occur, Pat’d Nov. 21st, 1871, was produced

by a single application of an oily film and heat in the way described

in your patent, would you ?

A. I wouldn’t consider it of the slightest consequence whether it

was or not, as this surface is so rough and spongy as to be of no

value as an ornamental surface, only in contrast and as a ground-

work in connection with bright surfaces, as appears on this exhibit.

All such surfaces are very deceptive, and I am not willing to swear

whether it is or is not such a surface as is described in the patent.

To repeat, perhaps, what I have said before, such a surface is of no

possible value, taken by itself as an ornamental surface.

Cross-Q. 37. Inasmuch as you are not willing to swear whether it

is or is not such a surface as is described in the patent, may we not

a

ae

gp RR

c+

SARGENT & COMPANY. 95

agree in regarding the alleged infringing butts as not involving the

patented process up tothe time of tie grinding of their salient

faces ?

A. I decline to agree to any admission. My testimony already

given will be a sufficient reason for so declining.

Cross-Q. 38. Do you, as an expert, swear that the alleged infring-

ing butts were subjected to your process prior to the —s of

their salient faces, and do you, as an expert, swear that the dark

groundwork on the alleged infringing exhibits was not produced,

in whole or in part, by pigments?

A. If my suppositions in regard to this exhibit in question are

right, I should say my patented process had been practised, and I

should say if there were any pigments used in the solution they had

so slight an effect as not to affect the result to any material degree.

(Objected to as irresponsive.)

Cross-Q. 39. Inasmnch as, in reply to cross-question 36, you say

referring to such surface, “I am not willing to swear whether it is

or is not such a surface as is described in the patent,” I suppose you

are unwilling to swear whether your supposition is correct or

not?

51 A. In the answer from whica that quotation is taken I

was swearing as to one small particular spot, which for some

reason appears to be more heavily coated, [ presume with the outer

coat of varnish, and has a different appearance from what the other

matted groundwork in this butt has. That spot, taken by itself, us

I said before, is confusing, but taking the two long strips of matted

work on the outside of this butt, I should say, according to my best

judgment, they come within the patented process. |

Cross-Q. 40. Please answer whether or not the color of the ground-

work on the alleged infringing butts is produced wholly or in part

by pigments?

A. If there was any pigment in the oil, I don’t think it had any

substantial effect in producing the color.

Cross-Q. 41. Please state whether or not there were any pigments

in the coating by which the groundwork was produced on the

alleged infringing butts.

A. I do not know whether there was or was not.

Cruss-Q. 42. Are you able to say for a certainty that the dark

groundwork on Tucker Exhibits D D D, and A were produced

otherwise than by baking on a black japan, and if such japan were

employed, might not the difference in shade be owing to the varying

action of the yellow coat of baked varnish placed above it, or some

other cause consistent with its being a japan coat?

A. To the first question, I am ; to the second question, it would not.

I will state that this groundwork under discussion is precisely the

same in texture and appearance and in all its characteristics with

the groundworks on all Tucker bronzed goods that have ever been

made of which I have had knowledge and experience since the dis-

covery of this invention was first made by ime.

Cruss-Q. 43. If, then, Sargent & Company have never made any

4—375

cenithnieitenbiameeete lta atin i gated cena iE et Ee ve at eet mt

Larner y: poi

eine itinetiiiiie ae bel ee a, ee oe

Pe et So ten

on hrm am nds Lh

Bi Re a . ms Pee ae - F a :

5 re LFS ~> ete 7 >" tr R * en & ou ©

FR Ee Eg EMS UT EO ET” A SE EN OP APS ne ny pi aot os Lisp Se

> ive rm eae 7 S t r x ms ace rs

26 WILLIAM H. PLUMMER, ADM’R, &C., VS.

imitation bronze butt excepting those whose groundwork was pro-

duced by baking a black japan, you would be willing to swear that

these butts were not Sargent’s goods, would you?

52 A. I should like to know before I answer that question (if

it’s proper for me know as an expert) what you mean by a

coating of black japan. If it is meant ordinary coating of thin

black japan, baked on in the usual way, or by any degree of heat, I

shall say such a coating has nothing whatever to do with my patent

here in suit; but if counsel for the defendants mean a coating of

extremely thin dark-colored japan, which when placed over the

groundwork produces no substantial color, and then submitted to a

heat such as is described in my patent, such heat coloring the coat-

ing and modifying to some degree the iron in connection with it,

that would be an infringement on my patent, as I understand it.

(Objected to as irresponsive.)

Cross-Q. 44. You have testified that if Mr. Henry B. Sargent has

correctly described the process of producing the groundwork on

defendants’ butts, such application was not within your process. If

all the butts made by Sargent & Company having salient faces had

their groundwork produced as he describes, then would you be will-

ing to swear that the alleged infringing butts were not made by the

defendants ?

A. I shouldn’t want to swear anything about it.

(Examination suspended.)

(Examination resumed.)

Oct. 23, 1880.

Cross-Q. 45. If Mr. Henry B. Sargent is correct as to the ground-

work of the alleged infringing butts being made as he states and the

salient faces are then ground away, there is nothing up to that stage

that contains your process, even from your standpoint, I suppose ?

A. I answered that question particularly and fully. There is an

ambiguity in Mr. Sargent’s description, if I understand it and

remember it correctly—that is to say, he doesn’t say in his affidavit

how thick or thin he uses the japan, or whether the groundwork has

been treated by removing sand or scale before so treating. Those

are conditions I should wish to be informed about before giving a yes

or no answer to your interrogatory. Further than this, I do not

53 remember (although he may have done so) that he stated the

4 degrees of heat used in the process for producing said ground-

work.

Cross-Q. 46. I understood from your answer to questions 9 and 10

of your direct examination that you were conversant with Henry B.

Sargent’s description contained in his affidavit, which is that the

sunken parts of the butts were first covered with a black japan, that

this coat of blacking was baked in an oven at a temperature not ex-

ceeding 320°. Do you claim that process so described to be within

your patent?

A. I do not.

ep eee

ee ee ee ee ee ae

SARGENT & COMPANY. 97

Cross-Q. 47 And the grinding off of the salient faces afterward

would not involve your process up to that stage either, would it?

A. It would not. :

Cross-Q. 48. And the production of the color by heat alone upon

the unoiled ground faces would not involve your process, up to that

stage ?

A. It would not.

Cross-Q. 49. The next step, as I understand, is the application of

a copal varnish. What mineral ingredients, in your judgment, are

contained in the copal varnish upon Exhibits D and D D?

A. I should say, practically none.

Cross-Q. 50. What mineral ingredients, in vour judgment, are

contained in said varnish?

A. Practically none.

Cross-Q. 51. (Question repeated.)

A. Copal varnish, as I understand it, will not hold in solution a

mineral ingredient. All minerals that I know anything about

which are used in copal varnish are used for the purpose of weer 3

ing and imparting drying qualities, and the minerals invariably

settle to the bottom.

Cross-Q. 52. What minerals, in your judgment, does the copal

varnish on Exhibits D and D D contain?

| A. Practically none.

54 Cross-Q. 53. What minerals do you have in mind in mak-

ing the discrimination which you seem to make between

none and practically none ?

A. Red lead, umber, or manganese, or sugar of lead, which settle

to the bottom of the tanks.

(Examination suspended.)

(Examination resumed.)

3 Nov. 8, 1880.

Cross-Q. 54. Have you ever superintended the production of

Tucker bronze practically—you have, I believe?

A. Yes.

Cross-Q. 55. When you practised the process by applying linseed

oil and afterwards rubbing it off thoroughly, as preseribed in the

patent, you were accustomed to dilute the linseed oil with turpentine

or eo or naphtha before applying it, were you not?

A. eS.

(Examination suspended.)

Counsel for defendants admits that Exhibits “ A,” “ D.” and “ D D”

were manufactured by defendants.

(Examination resumed.)

(And, in answer to redirect questions by said counsel for com-

plainant, saith as follows:)

4 ’ . ” ‘

ia RA re thse eats sadn jh 4 cash igo riphicencs Seam nla iman damn mca aosasiiaan ubllcuiahens edaietis aiasdbusiuiliesioel baedinidae aids teins ch ee . , aan ae

WILLIAM H. PLUMMER, ADM’R, &C., VS.

imitation bronze butt excepting those whose groundwork was pro-

duced by baking a black japan, you would be willing to swear that

these butts were not Sargent’s goods, would you?

52 A. I should like to know before I answer that question (if

it’s proper for me know as an expert) what you mean by a

coating of black japan. If it is meant ordinary coating of thin

black japan, baked on in the usual way, or by any degree of heat, I

shall say such a coating has nothing whatever to do with my patent

here in suit; but if counsel for the defendants mean a coating of

extremely thin dark-colored japan, which when placed over the

groundwork produces no substantial color, and then submitted to a

heat such as is described in my patent, such heat coloring the coat-

ing and modifying to some degree the iron in connection with it,

that would be an infringement on my patent, as I understand it.

(Objected to as irresponsive.)

Cross-Q. 44. You have testified that if Mr. Henry B. Sargent has

correctly described the process of producing the groundwork on

defendants’ butts, such application was not within your process. If

all the butts made by Sargent & Company having salient faces had

their groundwork produced as he describes, then would you be will-

ing to swear that the alleged infringing butts were not made by the

defendants ?

A. I shouldn’t want to swear anything about it.

(Examination suspended.)

(Examination resumed.)

Oct. 23, 1880.

Cross-Q. 45. If Mr. Henry B. Sargent is correct as to the ground-

work of the alleged infringing butts being made as he states and the

salient faces are then ground away, there is nothing up to that stage

that contains your process, even from your standpoint, I suppose ?

A. I answered that question particularly and fully. There is an

ambiguity in Mr. Sargent’s description, if I understand it and

remember it correctly —that is to say, he doesn’t say in his affidavit

how thick or thin he uses the japan, or whether the groundwork has

been treated by removing sand or seale before so treating. Those

are conditions I should wish to be informed about before giving a yes

or no answer to your interrogatory. Further than this, I do not

53 remember (although he may have done so) that he stated the

: degrees of heat used in the process for producing said ground-

work. :

Cross-Q. 46. I understood from your answer to questions 9 and 10

of your direct examination that you were conversant with Henry B.

Sargent’s description contained in his affidavit, which is that the

sunken parts of the butts were first covered with a black japan, that

this coat of blacking was baked in an oven at a temperature not ex-

ceeding 320°. Do you claim that process so described to be within

your patent?

A. I do not.

SARGENT & COMPANY. 27

Cross-Q. 47 And the grinding off of the salient faces afterward

would not involve your process up to that stage either, would it?

A. It would not.

Cross-Q. 48. And the production of the color by heat alone upon

the unoiled ground faces would not involve your process, up to that

stage ?

A. It would not.

Cross-Q. 49. The next step, as I understand, is the application of

a copal varnish. What mineral ingredients, in your judgment, are

contained in the copal varnish upon Exhibits D and DD?

A. I should say, practically none.

Cross-Q. 50. What mineral ingredients, in your judgment, are

contained in said varnish?

A. Practically none.

Cross-Q. 51. (Question repeated.)

A. Copal varnish, as I understand it, will not bold in solution a

mineral ingredient. All minerals that I know anything about

which are used in copal varnish are used for the purpose of clarify-

ing and imparting drying qualities, and the minerals iivatlehle

settle to the bottom.

Cross-Q. 52. What minerals, in your judgment, does the copal

varnish on Exhibits D and D D contain?

A. Practically none.

54 Cross-Q. 53. What minerals do you have in mind in mak-

ing the discrimination which you seem to make between

none and practically none ?

A. Red lead, umber, or manganese, or sugar of lead, which settle

to the bottom of the tanks.

(Examination suspended.)

(Examination resumed.)

Novy. 8, 1880.

Cross-Q. 54. Have you ever superintended the production of

Tucker bronze practically—you have, I believe?

A. Yes.

Cross-Q. 55. When you practised the process by applying linseed

oil and afterwards rubbing it off thoroughly, as prescribed in the

patent, you were accustomed to dilute the linseed oil with turpentine

or nse or naphtha before applying it, were you not?

A. Yes.

(Examination suspended.)

Counsel for defendants admits that Exhibits “ A,” “ D.” and “ DD”

were manufactured by defendants.

(Examination resumed.)

(And, in answer to redirect questions by said counsel for com-

plainant, saith as follows:) 3

28 WILLIAM H. PLUMMER, ADM’R, &C., VS.

Q. 1. What difference is there between the appearance of the

groundwork of the butts which have been under discussion during

the cross-examination, except those referred to as described in the

affidavit of Henry B. Sargent, and the appearance of groundwork

of butts that have been treated with oil in strict accordance with the

specifications of the patent? If any, please explain it.

A. The groundwork of butts which have been under discussion,

except the Sargent butt described in his affidavit, have been treated

with thin oily solutions, without rubbing. The groundwork of such

butts have all been of an absorbent character, and the effect of

dipping groundwork of butts is to saturate such absorbent ground-

work without leaving any excess of oil to be rubbed off. On the

other hand, when such butts with the same character of

55 groundwork are dipped into a thin solution of oil which has

been diluted with benzine or spirits of turpentine, the effect

is simply to fill the absorbent groundwork. The salient surfaces of

the last-named butts being polished before the butt is treated with

oil at all, and in consequence of being polished losing their absorbent

character, has to be carefully rubbed with paper, efoth, rag, sponge

or other suitable implements, but the character of the groundworks

in the two kinds of butts under discussion will be substantially

alike in all their characteristics—that is to say, as regards color,

texture, and so forth.

Cross-Q. 2. In your answer to interrogatory tenth of the direct ex-

amination you say “the process he has described for coloring and

covering the ground surfaces of his butts.” By the words “ ground

surfaces” do you mean the polished salient faces or the sunken

groundwork of the butts in question ? |

A. I mean polished salient faces.

Cross-Q. 3. In regard to the agreement between yourself and the —

Tucker Manufacturing Company, Charles M. Reed, and William H.

Plummer referred to in your answer to cross-interrogatory fifth,

whether you are ready, after consultation with counsel, to submit

the same to the inspection of counsel for the respondent ?

A. I am, and produce a copy for that purpose.

(Counsel for respondents places the said copy in evidence, marked

“ Exhibit Tucker Agreement, John C. Lane, Spee. Ex’r,” counsel for

complainant objecting thereto as incompetent, irrelevant, and im-

material.) .

HIRAM TUCKER.

Subscribed and sworn to before me November eighth, A. D. 1880.

JOHN C. LANE,

Special Examiner.

a

SARGENT & UOMPANY.

Complainant’s Evidence in Reply.

56 United States Circuit Court, District of Connecticut: In

Equity.

Hiram TucKER v. SARGENT & Co.

Testimony taken on behalf of the complainant in reply, under and

uursuant to the sixty-seventh rule of the Supreme Court of the

nited States, in equity, as amended, before me, John B. Mills,

special examiner.

Examination resumed at New Britain, April 15, 1881, ten o’clock

a.m.

Present: E.G. Loomis, Esq., of counsel for complainant; C. E.

Mitchell, Esq., of counsel for defendant.

(Hiram Tucker, a witness heretofore produced and sworn on

behalf of the complainant, to interrogatories proposed by E. G.

Loomis, Esq., of counsel for the complainant, answered as follows :)

Question 1. You are the complainant in this case, and have

already been examined therein?

57 Answer 1. I am; I have.

Q. 2. In what does your experience in regard to the use of

oil and varnishes generally consist, and what has been your ex-

perience in the process of manufacturing Tucker bronze ?

A. I have been familiar with the use of varnishes and drying oils

for the past forty years. I have been familiar with the Tucker

bronze process ever since its first discovery by me, and have been a

manufacturer of the saine for many years, since the date of the

patent. :

Q. 3. What has been your observation in regard to the novelty

of the process of making Tucker bronze, and of the product thereof?

(Objected to as incompetent and irrelevant.)

A. I have never heard the novelty of the invention-denied except

by those who were engaged in infringing the patent. I mean, after

the invention and its novelty has been explained to parties who had

sufficient interest to inquire in regard to the same.

Q. 4. Have you examined the testimony given by the several

witnesses for the respondent in this case?

A. I have; very carefully.

Q. 5. Mr. John Ruff and Mr. Brocksieper and Mr. Purmont Brad-

ford and Mr. Joseph B. Sargent and others have described a process

by which they claim that Mr. Brocksieper and others have finished

certain articles in imitation of bronze. Please compare the process

thus described by them with that described in your patent, and state

whether they are substantially the same, and give your reasons.for

your opinion. Please take processes in the order in which they

were described, beginning with the the watch-stand described by

Mr. John Ruff as sicher by Brocksieper in his presence.

30 WILLIAM H. PLUMMER, ADM’R, &C., VS.

A. The process which Mr. John Ruff describes as being practised

in his presence by Mr. Brocksieper does not, in my opinion, describe

a process for making Tucker bronze, for the reason that one essen-

tial element described in the patent is left out of the operation. Mr.

Ruff says that he obtained a casting of a watch-stand, and that after

receiving said casting from the foundry he brushed it with a

58 wire broom-bush, which is the ordinary implement used in

«ll iron foundries for the purpose of removing the loose sand

from an ordinary iron casting, and in no case is now used for the

purpese of removing scale. He says that after brushing the casting

with this iron broom-brush Mr. Brocksieper brought in a cup some

linseed oil without admixture of spirits of turpentine or any other

dilutant, and with an ordinary brush applied a very thin coat, and

afterwards held the article so treated over a forge fire until he ob-

tained, as he expresses it, the desired color. No matter what other

way this casting was treated, if the scale had not been removed as

described in the patent, the result of such treatment would not have

been Tucker bronze. I will say further in regard to this piece of

work that if Mr. Brocksieper had removed the scale from this cast-

ing in question there would be no evidence that the product he ob-

tained by such treatment was Tucker bronze. The coating of oil

which he has described, as I should understand it from his des-

cription, is simply such a thin coating as those familiar with japan-

ning ordinarily describe as thin coats, and would be very many times

thicker than that described in the patent, and the fact that he

might get a color from holding a piece of iron over a forge fire so

treated would be no evidence whatever that a surface was obtained

consisting of oxidized oil and oxidized iron, which constitutes the

novelty of this bronze invention in question.

Mr. Ruff also testifies that after witnessing the experiment of

Mr. Brocksieper he did a cast-iron sewing-bird substantially in the

same way in which he had seen Mr. Brocksieper do the watch-stand,

with the addition of chasing the work, which wasn’t a process for

removing scale at all. What I have said about the Brocksieper

—_ on the watch-stand will apply fully to this sewing-bird.

Neither of them are such descriptions as would enable a workman

skilled in the art of japanning to produce Tucker bronze. Mr.

wer? subsequent descriptions vary from the original process

as described by Mr. Ruff and himself in the fact that he removed the

scale as well as the sand from the coat and hat hooks, which I will

take for samples and illustration; he also added copal varnish

and spirits of turpentine to the oil for the purpose of

59 coating these coat and hat hooks, jamb hooks, ete. From

his description of what he did with this composition, it ap-

pears to me to be an ordinary thin coat or coating, but many times

thicker than that described in the printed process, and such a cout-

ing as in my opinion would prevent the iron from oxidizing the sur-

face underneath, unless the coating (which would be very apt to

occur) should crawl up into small bunches and leave part of the sur-

face exposed to the action of the heat, in which case the surface would

be of no commercial value whatever. But from the fact that Mr.

SARGENT & COMPANY. $1

Brocksieper testified that these coat and hat hooks and other articles

were left to partially dry so that they could be handled, as he ex-

pressed it, Ishould presume that the crawling effect might be obviated,

which would leave upon thesurface of the iron a colored surface which

to inexperienced eyes would appear very like Tucker bronze, but

would really be a surface, the same in character as a very thin coat-

ing of boiled oil japan would be over a surface of bright iron after

being submitted to heat, and a color and surface which was univer-

sally known and practised by all japanners of skill and experience

long before the date of and after my invention of what is called

Tucker bronze. I understand Mr. J. B. Sargent’s testimony to be

substantially the same as that of Mr. Brocksieper and Mr. Ruff, and

as intended to corroborate their testimony as to prior use of this

said invention. Mr. Brocksieper has testified at considerable length

in regard to the way he first became acquainted with the prone for

producing the so-called Tucker bronze. He says before he came to

this country he had seen practised the same thing substantially in

the process for tempering screws and shovels. The description of

this process of tempering, which Mr. Brocksieper became familiar

with, the knowledge of which, as he says, enabled him to make what

is called Tucker bronze with such facility, is very accurately de-

scribed by him.

It is a process that I have been familiar with, and that all workers

of metal of any experience, I believe, are familiar with, and in fact

is a very old art, it is presumed many hundreds of years. He says

that after certain screws were put into a perforated box, a

60 quantity of rapeseed oil was poured in, and the box held over

a forge fire, or a proper fire, until the proper color and effect

was produced. The effect of such treatment as this upon steel is

simply to affect its temper, and incidentally to give the skin of the

steel orirun a darker color than it otherwise ala have. This rape-

seed oil mentioned by him is not a drying oil, and in no sense the

equivalent of linseed oil for the purpose of making Tucker bronze,

and is simply the equivalent of lard or sperm oil, and used for Jubri-

cating purposes, or for the purposes of tempering, as described. A

person situated as Mr. Brocksieper was when he first came to this

country, or first went to work for the Peck & Walter Company, and

having bis attention called to a piece of iron-work, as it was, by Mr.

Ruff, and not being acquainted with the art of japanning or its kin-

dred arts, it would be the most natural thing in the world for him

to take linseed oil, if more convenient to his hand, and go through

the saine operation that he had seen practised abroad. Now, to show

that Mr. Brocksieper hasn't a correct idea, even at this late day, of

what constitutes the new surface produced by the process described

in this bronze patent in suit, I an attention to that part of his testi-

mony where he says (without attempting to quote his exact language)

he considers this Tucker bronze to be the result of the tempering

process practised and well known by workers in metal, and the same

as that which he describes as seeing abroad, which is the same thing

as that universally used for tempering. Now, as a matter of fact,

those processes described by Mr. Brocksieper do not produce a sur-

Oo eee Nn eagle am at ant

32 WILLIAM H. PLUMMER, ADM’R, &C., VS.

face at all like Tucker bronze in character, for the reason that this

rapeseed or lard or sperm oil, used as he has described the rapeseed

oil was used, and I use them all as being the same in character, do

not change in character under the action of heat in such a way as

to leave the hard resinous substance which results from the use of

linseed oil, and which is one of the constituent elements of the com-

bination to make the new surface in question, but simply leave a

greasy surface that can be rubbed off by waste or paper, or washed

off by soap and water, as a greasy plate should be washed. Mr.

Brocksieper has testified to a process he used in producing a color on

Defendant’s Exhibit Brocksieper Picture Frame.

61 If I remember rightly, he says he first coated this with a

coating of size, made from varnish, oil, and spiritsof turpentine,

which is a very good composition for the purpose of sizing, if allowed

to remain a sufficient length of time to becone homogeneous—other-

wise the composition would act badly—but heavier in body than

the untreated linseed oil would be; that he did this picture-frame

ever with the solution, putting on, as he expresses it, equal parts,

after rubbing the prominent points of the frame with sand-paper,

and brushing the rest part of the frame (I will state here what I

omitted to state before, that the ingredients from which the size

was made were composed of — parts of linseed oil, copal varnish,

and spirits of turpentine.) Now, provided Mr. Brocksieper is not

mistaken in the slightest degree as to the process he practised on this

frame, there is no evidence that he produced Tucker bronze, for the

reason thatthe only part ofthis frame from which the scale was removed

presents the appearance of copper; and again, although this frame

appears to be colored, that is no evidence that there was a sufficient

amount of heat from the forge fire, or that a sufficient amount of

heat from a forge fire got to the surface of the iron which was cleaned

by sand-paper, to raise an oxide in conjunction with the oxidized

oil. Now. to my mind, one of two things is true in regard to the

process practised by Mr. Brocksieper on this frame in question; he

either did not apply sufficient heat to the size he placed upon this

frame by holding it over the forge fire to bring it to the ordinary

coler produced from practising the Tucker patented process (because

it does not have the appearance of any Tucker bronze that I ever saw

in my life), or he has rubbed on a thin coating of paint, composed

of pigment and oil—most likely umber, if I am correct—then dry-

ing that over the forge fire or hardening it; afterwards touching it;

afterwards touching it with bronze powder un the prominent points,

as he has described.

The character of the copper appearance on the prominent points

of this fraine I must say is a mystery to me, in view of the testimony

given by Mr. Brocksieper. If 1 was asked to give my judgment as

an expert in matters of this kind as to how this coating or

62 color on this frame was produced, I should say, after the cast-

ing came from the sand it was brushed and sand-papered as

Mr. Brocksieper has described it; that it was then submitted to a

battery process, and a blush of copper deposited on the bright por-

tions, and naturally to a very slight extent on the other portions of

SARGENT & COMPANY. 33

the frame; that afterward this very thin pigment was rubbed on

very thinly over the whole surface, and then the prominent, salient

points rubbed with a rag to remove the pigment from the bright

copper points. This process which I have described is old and well

known, not only practised on iron, but for many years on spelter for

chandelier work, and by following the description as I have given it,

just such appearing work as this would be the result; and for those

reasons, and from the long time which has elapsed since Mr. Brock-

sieper performed his operations on this frame, I think he has cer-

tainly forgotten just how he did it. Tucker bronze does not change

in color from the lapse of time unless exposed to the action of flies

and the weather. From my observation of work that was done as

far back as the date of the patent, there isn’t the slightest change

apparent to the eye in thecolor and characteristics of its surface, and

I propose, as the complainant in this case, to submit exhibits with

proof of their being done twenty years ago.

I have not scrutinized Mr. Purmont Bradford’s testimony with the

care I have devoted to Brocksieper’s, Ruff’s, and Sargent’s, for the

reason that his operations could not be considered as anticipating

the patent, if he had not made the slightest mistake in the descrip-

tion of what he did, as the result was a common japan surface. I

should not consider it at all sure, however, if he had omitted the

last coating which made practical japan, that he had done anything

that would anticipate my bronze invention, as there is no satisfactory

evidence in his description to show that he produced a surface of

oxidized iron and oil combined.

Q. 6. Mr. Sawyer and Mr. Angevine have described the processes

by which they dates to have finished certain check-canceller spears

in imitation of bronze. Have you examined their testimony, and

will you please compare the processes described by them with

63 that described in your patent? State whether they are sub-

stantially the same, and give your reasons for your opinion.

A. I have examined the testimony of the witnesses referred to

with a great deal of care, and I do not find such a description given

by them as would enable the person skilled in the art of japanning

’ to make the patented bronze. My reason is, first, that the descrip-

tion in regard to applying the oil with a brush and paper does not

describe within a degree of accuracy the thickness or thinness of

the coat of oil. The witness used the word- “ very thin;” but that

is a comparative term, and what would be an extremely thin coat-

ing in ordinary phrase, as applied to japanning would mean a coat-

ing many times too thick to produce merchantable Tucker bronze.

There is a portion of the testimony of Mr. Angevine, in regard to

one process used on these spear-heads, which Iam not able to recon-

cile in a way to appear reasonable to my mind. He says, without

quoting his exact sonic that after these spear-heads were pol-

ished and oiled he placed them on a thin iron plate, the spear-heads

standing on their base, about two inches from the iron plate, which

was about an inch anda half thick, more or less, and which was

placed directly over the fire which heated the kiln. Iam a little

too fast in my description. He says that this thin sheet-iron plate

5—378

34 WILLIAM H. PLUMMER, ADM’R, &C., VS.

was placed over the thick iron plate which covered the fire, and when

that thin sheet-iron plate became red hot, or a portion of it as bi

as a ten-cent piece became red hot, that then the spear-heads, oile

as he has described them, were placed on this thin sheet-iron so

heated and allowed to remain about an hour, and were then finished.

Now, this witness has certainly made a mistake in this description,

for the reason that small pieces of iron like the spear-heads in ques-

tion, placed in such a heat as they must have received under such

circumstances, would in a very few moments have attained the heat

of the red-hot plate on which they were placed, and the inevitable

consequence of such heating would be to utterly destroy any oil

coating which might have been placed thereon. There is not the

slightest evidence that these spear-heads, which were oiled and col-

ored over the forge, had on .their surface when finished anything

more than a thin coating of linseed oil, which had been colored by

heat.

64 Q. 7. Have you had any communication with J. B. Sar-

gent, of New Haven, who has testified in this suit, in regard

to your invention described in the letters patent now in suit; and,

if so, what? |

A. I have had. I saw Mr. Sargent, at his factory in New Haven,

the last of September or the first of October of the year 1876, soon

after the decision of Judge Clifford in my suit against the Tucker

Manufacturing Company for their infringement of my bronze. My

business with him at that time was to effect a settlement with him

for his past infringement of my bronzing patent. Mr. Sargent at

that time said that he had not infringed my patent, for the reason

that his work or bronzing was done by the old japanning process,

which was a matter of common knowledge among everybody familiar

with the patent ; and when [ explained to him the nature of my in-

vention, and explained to him the grounds on which the decision of

Judge Clifford was based, he denied that the process he used resulted

in any oxidation of the iron, but was simply a thin coating of Japan

over a bright surface. The result of this interview was Mr. Sargent’s

denial of infringement and my affirmation that he did infringe.

Q. 8. Whether or not Mr. Sargent said that he had made goods

that were like Tucker bronze previous to the date of your invention,

or claimed to have anticipated in any way your process patent ?

A. Mr. Sargent distinctly claimed at that interview that my pro-

cess differed in no essential particular from the old and well-known

japanning process, and the only way that I had attained notoriety

and success was by doing the work nicer—I mean by “the work ”

the japanning—than was practiced by the trade before the date of

— patent. He did not intimate in the slightest degree that him-

self or any one in his employ had ever donea similar fizish on iron

which differed from the old japan process.

Q. 9. Were the originals of the two letters already in evidence an:

agreed to be true copies of letters written by J. B. Sargent, and put

in evidence in case of Tucker v. Burditt and Williams, except that

the copy of letter No. 2 is undated, received by you from Mr. Sar-

gent ?

A. They were.

ee a

—

SARGENT & COMPANY. 35

65 Cross-examined by Mr. MiTcHELL:

Cross-Q. 10. Do you recognize Defendant’s Exhibits Cancellers A?

and A® and B? and B? as having the finish described and claimed in

reissued letters patent No. 2356 ?

A. I don’t know whether they are or not. If they have been oiled

the oil has been rubbed off with such extreme thoroughness as to

make it difficult for me to determine from simply looking at them.

Cross-Q. 11. Ii your opinion, are the exhibits referred to in the

last question Tucker bronze or are they not?

A. I have given as intelligible an answer to your question as I am

able. It is not one to which I can answer simply ves or no.

Cross-Q. 12. Can you not tell by inspection whether an article is

Tucker bronze or not?

A. Not certainly ; when exhibits are made for the purposes of de-

ception, I cannot.

Cross-Q. 13. Can you say whether Defendant’s Exhibits Canceller

A! and Canceller B! are or are not Tucker bronze ?

A. I should say with a good deal of confidence that the Exhibit

A! was simply a brightened piece of iron colored by heat, and not

Tucker bronze. Exhibit Cancellef B' presents an appearance slightly

different from Canceller A', and I am not able to say whether it is

Tucker bronze or not. If there is any oil, linseed, or its equivalent

oil, on this exhibit I am not able to distinguish it.

Cross-Q. 14. Well, is B' Tucker bronze?

A. I have answered as intelligibly as I can already, and I say

about that as I said before, it is not a question which I can say yes

or no to.

Cross-Q. 15. Is or is not A? Tucker bronze ?

A. Same answer to this question as to the last.

Cross-Q. 16. Is or is not Canceller A* Tucker bronze?

A. Yes; I should call that a poor specimen of Tucker bronze. On

close inspection, I think I see oil mixed with the oxide—not a good

specimen by any means, and I am not sure that the character of

t

ie oil, on looking at it, would be linseed oil and come within the

patent. I only guess at it. ,

66° Cross-Q. 17. Is or is rot Canceller B® Tucker bronze?

A. I don’t know whether it is or not; if it is, it is a worth-

less specimen. ,

Cross-Q. 18. Is or is not Canceller B® Tucker bronze ?

A. May be a very poor specimen ; cannot answer yes or no.

Cross-Q. 19. If made in the way testified to by Mr. W. R. Sawyer

and Mr. Angevine, are they Tucker bronze?

A. I paid very little attention to that part of the testimony of

these witnesses, because I didn’t consider it of the slightest moment

t my case what sert sc exhibits of Tucker bronze they may make

4¥, or wl? sort of experiments they may conduct. My evidence

4 * bears upon what these witnesses actually did, or

. did, before the date of my bronzing patent here

Et. ta

ve ot ai as Langa i otk ete ty 4, TEE ee SOE ees Seen ee eRe ‘ :

a a Gonghe; s EE ope YL eS Nike ste: EP, Oe ; Dee ee os ao 7 et oe eee ea

: Ge oe ee -. 2 LMS Cae ee ros : 5 a 2 -. Sa. 4" hy ov ae: ee

” wh Wins: s5'4 ea ete hes PO ee Ce ee ee i a ee of ot ie Bi

h

3 x Oe

86 WILLIAM H. PLUMMER, ADM’R, &C., VS.

Cross-Q. 20. You heard the testimony of Mr. Sawyer and Mr.

Angevine, did you not, when it was given ?

A. I heard a portion of it, and saw the other portion of it in writing.

Cross-Q. 21. peer) if Cancellers A? and B? and A® and B® were

made as described by Mr. Sawyer and Angevine, they are Tucker

bronze, are they not?

A. I can only say there were so much testimony given by those

gentlemen that was irrelevant that I didn’t think it worth while to

examine any more of it than related to this case. What they swore

they did before date of this invention or patent I examined with a

great deal of care and interest, but 1 consider this superabundance

of exhibits made for the purposes of this case were superflous and

a waste of time, and for that reason didn’t think it worth while to

go into it. :

Cross-Q. 22. Do you mean by your last answer that you do not

know how Mr. Sawyer and Mr. Angevine testified that Cancellers

A? and A® and B® and B* were made and finished ?

A. I do mean to say just that; I don’t mean to say that it was

not stated in my presence, or that I might not have heard some-

thing about them; but, knowing.that testimony of that character

would have no important bearing upon this case, I did not charge

my mind with it, and can’t state at this moment more definitely

than I have stated their testimony on that point.

67 Cross-Q. 23. You were present assisting your counsel dur-

ing the taking of Mr. Sawyer’s and Mr. Angevine’s testimony,

and were in constant consultation with your counsel during their

cross-examination by your counsel, were you not?

A. I was not present at the direct examination of Mr. Sawyer or

Mr. Angevine, but my counsel read over to me, before coming to

the office of the examiner, portionsof Mr. Angevine's direct exaini-

nation, and after full consultation, Mr. Loomis and myself concluded

that it was not worth while to cross-examine on Mr. Angevine’s tes-

timony, or at any length on either; but since that time my counsel

and myself have discussed the important points that I have stated

of the testimony of these two witnesses. anand

Cross-Q. 24. Did you not understand Mr. Sawyer to say, and Mr.

Angevine to corroborate him in saying, that Cancellers A? and A?

and B* and B® were made and finished in the same way as check-

cancellers were made and finished at Smith’s in Westfield before the

war of the rebellion ?

A. Of course I understood in a general way the significance of

these exhibits put in by these witnesses in question, that they were

put in for the purpose of showing priority of use of this process be-

fore the date of the patent in question; but, as I said before, I didn’t

consider that part of the testimony of the slightest importance, and

did not charge my mind with precisely what was said about them.

Cross-Q. 25. Pardon me for saying that you were not asked what

portion of the testimony referred to was important, nor whether

yeu charged your mind with precisely what was said. I simply

asked you whether you did not understand the witnesses to say that

the exhibits referred to in the last question were made and finished

ER ha Sa ea a ame sh Pe ae Re Ge ND ee ane CN OSE Oe LEME Be ST One Saeed

Cage an 2 Fg i : a ee ie Paty Us ees OMe py er ee ’ bie aes ben ¥ ET Pe een oe OS

pS oak AN a fete ty aed alk, UP ies Ae 5 ha ae SE Ns os BS Mey te ed lS i te es? iB i 5 és Sat

rs >

_ SARGENT & COMPANY. 37

in the saine way as check-cancellers were made and finished at

Smith’s in Westfield, before the war of the rebellion? Now, can

you not answer that question?

...A. I think I have said to you, in answer to a former interroga-

tory, that I could not, and I repeat that answer now.

Choa, 26. What did you understand Exhibits A? and A? and

B? and B® were intended to represent?

A. That those were done by the witnesses as specimens of

68 color they produced on goods before the date of my patent.

I had no trouble about understanding the signifieance. of

those exhibits at any time; I only meant to say, in former answers,

that I don’t remember specifically what they said about them, or

how they testified. |

(Counsel for defendant states that he will resume the cross-ex-

amination upon the foregoing subject-matter when the testimony

of Messrs. Sawyer and Angevine is present, it being now in the

_ hands of the printer.)

Cross-Q. 27. In your opinion, is Defendant’s Exhibit Ruif Art Ex-

hibit Tucker bronze ?

(Objected to.)

A. I should say it was a very good specimen.

Cross-Q. 28. Within letters patent No. 2356?

(Objected to.)

A. Undoubtedly.

Cross-Q. 29. And No. 2355?

(Objected to.)

Cross-Q. 30. Is Defendant’s Exhibit Art Casting No. 1 within re-

issued letters patent No. 2356, and finished by the process described

in No. 2355?

(Objected to.)

A. Undoubtedly this is Tucker bronze.

Cross-Q. 31. And is the same true of Defendant’s. Exhibit Art

Casting No. 2?

A. Yes.

Cross-Q. 32. And is the same true of Defendant’s Exhibit Art

Casting No. 37

A. I should say it was; the portions that appear to the eye are

not covered with the bronze powder. I have no doubt the surface

under the bronze powder is of the same character, but am not

absolutely certain.

Cross-Q. 33. And is the same true of Defendant’s Exhibit [?

A. Yes.

reg 34. And is the same true of Defendant’s Exhibit L?

A. Yes. |

helen met. ¢ = " ~~ n sation

pebanitaiapdiuiinatdtiimitaeebiniia a is ens labtits sc heablaaistn.oon SeecaeaeaamnenecuaeN

: ay tA ’ ee ‘

Pits) . ile palin te U4 »

PEA AE NAAT LYLE NEES AIR) Al Sata AB 'e ea73

anime ewes ep Aippnnsa renee tiene mapas tpemspinrrenntnit aia,

38 WILLIAM H. PLUMMER, ADM’R, &C., VS.

Cross-Q. 35. Is the same true of Defendant’s Exhibit Match-box ?

(The same being two match-boxes separtely tagged.)

69 Yes.

Cross-Q. 36. Is the same true of Defendant’s Exhibit G, H,

and H??

A. Yes.

Cross-Q. 37. And the same is true of Defendant’s Exhibit J, J?, sail

L, these, however, having had a further finish by tipping their ridges

with bronze powder ?

A. Yes; all that you have called my attention to in this question

have been through the Tucker process, in my opinion.

Cross-Q. 38. Is the same true of the six central knobs of Defendant’s

Exhibit A B?

A. Yes; although ihese seem to be a little coarser specimens.

Cross-Q. 39. Then, if I understand you, all the exhibits to which

your attention has been called since and including cross-Q. 27 con-

tain an exhibit both of the improvements (if they can be separated)

described in your two patents in suit?

(Each of the questions objected to, from the cross-Q. 31 down to

and including the above interrogatory, as incompetent, irrelevant,

and immaterial.)

A. Yes.

Cross-Q. 40. The same is true of Defendant’s Exhibit C D, is it not,

so fur as the six central knobs are concerned ?

(Objected to as above.)

A. These seem to be poor specimens of black knobs, neither bronze

in color nor good black. I have no doubt that the scale has been

removed, and these knobs are so treated that they contain the ele-

ments which I claim as constituting Tucker bronze; but the result

of such treatment is such that no valuable end has been attained

over the old japan process, as far as the appearance of the goods go.

That is about all I can say in relation to those exhibits in answer to

that question.

Cross-Q. 41. And E F are also within your patents in suit, are they

not—I mean the six middle knobs? I call your attention especially

to that part of your patent which says that the process may be re-

peated until a black color is produced, the fact being that C D repre-

sents the repetition of the process applied to A B, and E F represents

still another repetition of this same process.

70 (Same objection as before.)

A. Assuming that these knobs had the scale taken off, and were

then treated to a thin coating of oil, as described in the patent, as

they appear to be—some of them—and then heated until the oil

and the color of the iron appeared simultaneously, and then still

further treated with a thin coat of oil, and re-treated to the color of

black, as appears on these darkest-colored knobs, I consider would

=e the patented process and producing the patented re-

suit.

SARGENT & COMPANY. | 39

Cross-Q. 42. You say, referring to the watch-stand finished by

Brocksieper for Ruff (I refer to your reply to Q. 5), that Mr. Ruff

says, “that, after brushing the casting with this iron broom-brush,

Mr. Brocksieper brought, in a cup, some linseed oil without admix-

ture of spirits of turpentine or any other dilutant.”. Where does Mr.

Ruff say that the linseed oil was undiluted ? |

A. I don’t mean to be understood as saying that Mr. Ruff said

any such thing as that; but he said it was linseed oil, if I remember

rightly; that of course inferred that there was nothing with it.

Cross-Q. 43. Do not your patents prescribe the use of linseed oil,

and do they anywhere instruct the reader to dilute that linseed oil ?

A. The patent describes linseed oil to be used pure and simple,

either raw or boiled. They do notsay anything about spirits of tur-

pentine or any other dilutant being necessary.

Cross-Q. 44. Then vou cannot regard the fact that Mr. Ruff fails

to refer to any dilutant as in anyway material, can you?

A. I think so, in connection with his operation in regard to that

exhibit. It is very material, as it is the only office of spirits of tur-

pentine, when used with oil or varnish, to enuble the user to obtain

a thin coating with less trouble than he would without the spirits or

any other dilutant; and if Mr. Ruff had testified that he had diluted

his oil with three or four parts spirits of turpentine, more or less, to

one of oil, he would have got on a very much thinner coat by the

process he describes as using than he did.

~ Cross-Q. 45. You do not appear to understand me. Your

71 atents require the use of linseed oil, or its equivalent. Mr.

_ Ruff says Brocksieper used linseed oil; does he not then say

that Brocksieper used the material which your patent prescribes ?

A. Certainly. ,

Cross-Q. 46. If, as would appear from Int. 38 and its answer, of

Mr. Ruff’s deposition, Art Castings No. 1 and No. 2 were bronzed by

the same process as the watch-stand in question, you would have

no doubt of its being what you now call Tucker bronze, would you?

A. Not the slightest.

Cross-Q. 47. You find nothing in Mr. Ruff's testimony to indicate

that the castings were not smoothed in the sense of having the scale

removed by tumbling or otherwise before the brush was used, do

you?

A. First place, Mr. Ruff said nothing about tumbled casting ; in

the next place, an iron wire broom wouldn’t have been a suitable

tool at all to have treated a tumbled smooth casting with—it was

not made for that purpose; and, in the third place, it would be next

to impossible to tumble a delicate casting, such as he has described,

without either breaking or destrying its beauty of configuration. I

took it for granted he described the process as he a it.

Cross-Q. 48. I so understood also; your reply to Int. 5 also contains

this language: “ Mr. Ruff also testifies that after witnessing this ex-

periment of Mr. Brocksieper’s (the watch-stand) he did a cast-iron

sewing-bird substantialy in the same way in which he had seen Mr.

Brocksieper do the watch-stand, with the addition of chasing the

work, etc.” Now, Mr. Ruff in describing bow he made the sewing-

)

CREE LODE NSARM SERIE, SARS abi Pu a EM AE is Ce SI scl acne oi ha

. Te, Ri sige eee ee 5

4

nn -“ , BR oa

a. ~ ~ - ~ ~e a —— ~ ae omovies

- mya rye per tA rent

ae Rag wae S ne GSB nie Bree eS ~ —— x Seeeewose

ae abt = “ai re vee REST uy aS ~~ _—

phx

believe, entirely irrelevant to the case.

he regards as irrelevant to this case.

Sapte Ee

42 WILLIAM H. PLUMMER, ADM’R, &C., VS.

for the purpose of ornamentation ; his varnish was applied after the

iron had become cold. I don’t claim that as a Tucker process at all,

for the reason that the oil-varnish was not reheated.

Cross-Q. 63. Then there is some sense in applying oil or oil-varnish

to scythes or shovels apart from producing the operation of temper-

ing, 1s there not?

A. No, not the slightest if you are going to burn your oil

75 or varnish all off, and leave the iron as it was before, as Mr.

Brocksieper has described it.

Cross-Q. 64. Where has Mr. Brockseiper described the burning-

off of the oil?

A. In his description of the shovel process, where he describes

the change of color which took place on the iron under heat after

being oiled, to wit, the dark blue color of a portion of the shovel.

Cross-Q. 65. The oil would burn off in your process if the heat

became too great on a particular portion of the article heated, would

it not?

A. Yes, but in this case the process that Mr. Brocksieper has de-

scribed differs essentially from my patent process, putting aside the

kind of oil that he uses, in the fact that in this shovel process a

substantial coat was placed on the shovel before submitting the

same to heat, and that the only effect of heat on such a coating of

oil, provided it had been by linseed oil, would have been to make

it perfectly black, before the dark blue color which he describes the

operator as watching for should make it appearance. Mr. Brock-

sieper has described pure and simple the proper and weil-known

process for treating shovels tipped with steel for the purposes of

temper.

Cross-Q. 66. In reply to sixth interrogatory you said, “I have ex-

amined the testimony of the witnesses referred to (Sawyer and

Angevine) with a great deal of care.” Do you still adhere to that

statement ?

A. I do. :

Cross-Q. 67. Then will you tell me whether exhibits Canceller A?,

B?, A*, B® are Tucker bronze, if they were finished in the way testi-

tied to by those witnesses? é

A. I baven’t thought it advisable to give that part of their testi-

mony any considering whatever. When I testified that I had ex-

amined their testimony very carefully I meant that part of it which

I considered essential to this case, to wit, what the witnesses actually

did before the date of my invention. Whether these spear-heads

which they have put in for the purpose of illustration are Tucker

bronze or not hasn’t to me the slightest interest, as I view the

76 matter. In a over that testimony, or in having it read

over by my counsel to me, I found the great mass of it, as I

(Counsel for defendant states—

ist. That he did not ask the witness what part of the testimony

SARGENT & COMPANY. 43

2d. He did not ask the witness what part of the testimony has to

him the slightest interest, as he views the matter.

3d. Whether the witness thought it advisable to give that part of

the testimony any consideration whatever, and in view of the mani-

fest interest of the witness he declines to cross-examine him further

as an expert.)

(Counsel for complainant states that if any answer of any witness

is regarded by counsel for defendant as irresponsive, or as otherwise

objectionable, the usual remedy of objection is open to him.)

HIRAM TUCKER.

Sworn to this sixteenth day of April, 1881, before me—

JOHN B. MILLS,

Special Examiner.

anne adjourned until Monday, April 18, 1881, at Boston, at

eleven o'clock a. m.

Boston, April 18, 1881.

Examination resumed. Counsel present as before.

Examination adjourned to Tuesday, April 19, at 9.15 a. mn.

Boston, April 19, 1881.

Examination resumed. Counsel present as before.

Hrram TucKERr recalled:

Question 1. If you have procured any specimens of Tucker bronze,

showing the effect of time and of wear, alee produce the same.

Answer. I have; I hereby rroduce one lamp complete and

77 part of another; these lamps have been in use from fourteen

to fifteen years; the difference in color of these two lamps is

owing partly to the difference in character of oil used for the purpose

of producing the bronze, the amount of heat they were submitted to,

and the difference of the smoothness of surfaces. The grayish ap-

pearance of the ground-work on the incomplete lamp, whic 1 repre-

sents the acorn pattern, as we call it, is owing to a very thin pi ment,

composed of flake white, verdigris green, and linseed oil, which, after

being applied very thinly with a brush, was rubbed off with a rag

or tissue-paper, and is intended to represent the oxide that appears

on the ground-work of real bronze which are in the rear of salient

surfaces.

Q. 2. By whom were these exhibits, Tacker Lamp No. 1 and

Tucker Lamp No. 2, made; and when and where have they been

since they were made; and to what wear have they been subjected ?

i RTE puts in evidence Complainant’s Exhibit Tucker

Lamp No. 1, J. B. M., special examiner, and Complainant’s Exhibit

Tucker Lamp No. 2, J. B. M., special examiner.)

A. These lamps were made by the Tucker Manufacturing Com-

‘pany while I was superintendent, done under my supervision ; and

44 WILLIAM H. PLUMMER, ADM’R, &C., VS.

lamp No. 1 was given by me as a present to my brother, Edward O.

Tucker, and to my knowledge has been used by him as a kerosene-

oil lamp certainly as many as fourteen years; lamp No. 2 was given

as a present to Mrs. Mary H. Green, my sister-in-law, and has been

in use as a kerosene-lamp for about the same time as lamp No. 1 has

been used by my brother. :

Q. 3. Please state what has been your experience with reference

to the art of japanning.

‘A. I was taught the art of japanning about forty years (40 years)

ago, in Meriden, Conn.; about thirty-odd years ago I was engaged

in a manufacture which required the best skill of japanners. It was

in the manufacturer of mirror marble chimney-pieces, which were

composed of a frame-work of highly ornamental cast-iron and panels

of plate glass. As this cast-iron work was made to represent

78 black marble as near as possible, the japanning had to be

done with great care and skill. I found the japan so obscured

the fine lines of the castings as to be very objectionable, and it was

at that time that I first began to experiment with a view to making

a better finish for ornamental cast-iron work. I will say here that

cast-iron was the ftinest-flowing metal, when put into moulds

[in] the form of castings, known to the arts; but, for the want of a

suitable finish, it had never been used for work such as chandeliers,

lamps, and fine builders’ hardware was: required. At the time re-

ferred to, to wit, when I was engaged in manufacturing these chim-

ney-plieces, | made a long series of experiments with thin coatings

of japan in our regular japan oven for the. purpose of discovering

an improved finish, but without valuable ‘result until I had con-

structed a small oven where I could obtain a much higher degree

of heat, and where | began to apply extremely thin coatings of a

solution of ivory black and boiled linseed oil of commeree. I sue-

ceeded in producing a fine black coating by putting on this black

solution ina thin coating and then rubbing off the same with a

common shoe-brush thoroughly. In pursuing these experiments |

noticed on the prominent points of an ornamental casting, which

had been made bright before | began to treat it, which points had

been rubbed off more thoroughly than the other parts of the cast-

lug, Slight indications of a bronze color. This discovery led me to

think it might be possible, by leaving out the black from the boiled

oll, to produce a new finish. I took a highly ornamental picture-

frame and, after brightening the salient points with elhery-papber to

rerhove the scale, treated it with ati extremely thin coating ot boiled

oll,and then removed as noiuch of that coating as | conveniently

could witha shoe-brush. The result was not satisfactory, but showed

to my mind the possibility of obtaining a new finish in this way.

Owing to press of business at this time, and te the fact that I was

called to go to hngland to superintend the manufacture of these

mirror marble chiminev-pieces, 1 did rial Pursue miv eX periments

further at that time. While in England I had an excellent oppor.

tunity lw eXaimmine thie slule ot the art of culoring ifuli, baat found

nothing that would indicate that English manufacturers of

a fine ilronWares were working tm the direction of the new

an

SARGENT & COMPANY. 45

bronze finish I had in my mind. The time I have been speak-

ing of in relation to these manufactures and experiments was as

far back as 1849. I went to the World’s Fair, in Paris, in 1855,

where I had a more excellent opportunity to examine the state of

the art of finishing iron as ante on in different parts of Europe-—

and, in fact, the world, as a world’s fair was being held in Paris at

that time. I saw nothing at that time that indicated that manu-

facturers of fine ironware who exhibited at that fair knew anything

about what is now called Tucker bronze. About 1560 or 1861 I

again began a series of experiments for the purpose, if possible, of

completing my discovery of this bronze in question, and, after spend-

ing considerable time and money, I met with abundant success, and

applied to the Patent Office of the United States for a patent for the

process of making the new bronze which I had discovered. A pat-

ent was granted me Dec. 15, 1863, which patent is now in litigation

between myself and Sargent & Co. I immediately after the discov-

ery of this invention began to manufacture the patented goods.

These goods were received with great favor by all classes of manu-

facturers and traders who were interested in lamp, chandelier work,

and builders’ hardware particularly. The goods very rapidly super-

seded brass, spelter, and plated goods for certain uses, and came

largely into use for builders’ hardware, gas and kerosene chandeliers,

brackets, lamps, etc., and in fact created a new industry which never

existed before. In 1867 the Tucker Manufacturing Company, which

was formed in 1865, had in their employ between two and three hun-

dred men making these patented goods, so rapidly did they come

into use. In 1867 the Tucker Manufacturing Company sent a large

line of these goods, consisting of chandeliers for gas and kerosene,

lamps, clock cases, ete., to the Paris Exposition. This work created

a great deal of interest both among scientific men and manufac-

turers of metal goods generally. Favorable notices were published in

the different scientific journals of Europe; noticeably, “ London En-

gineering,” edited by the late Zerah Colburn; also in the “ London

Art Journal.” These goods received a first-class medal as a reward

of merit, the highest prize given at that exhibition,

SU (Objected to as incompetent and as irrespousive, so far as

the answer goes, outside of the matter inquired of in the

question.)

Q. 4. Describe the various modes of japanuing and the materials

and tools used therein.

A. Japan is made from linseed oil boiled to a paste, and, after

cooling, partially reduced by adding the same quantity of spirits of

turpentine as there is of boiled paste. This composition represents

what is called English lock varnish; adding to this composition

Paris or Prussian blue makes what is ealled brown japan. Still an-

other addition of asphaitum, dissolved in spirits of turpentine to

about the consistency of cream, makes what is called black japan.

These different solutions are usually used on iron or other metal

work, papier-mache, or other work without further dilution when

the composition is comparatively new, but after standing a length

46 WILLIAM H. PLUMMER, ADM’R, &C., VS.

of time (six or eight months) it becomes quite thick, and has to be

reduced with spirits of turpentine before using. This japan is put

on in varying degrees of thickness, from very thick to very thin, ac-

cording to the smoothness of the ground-work on which it is placed.

The English, or the first composition, such as I have described as

English lock varnish, is intended to be used over bright surfaces, and

produces the effect of light straw color when first applied, which color

is deepened by applying heat tothesame. These coatings are usually

applied very thin. The next composition, which is the same thing

with the addition of the Prussian or Paris blue, makes a japan of a

darker hue, called brown japan. This japan is used sometimes on a

bright tin surface, like the well-known petticoat lamp or tin lantern,

dust-pans, ete., and is something the tone of color of lamp marked

’ Tucker Lamp No. 2.” This japan also is used of various degrees

of thickness and thinness, according to surface and color desired, also

upon bright iron surfaces, long before the date of my patent in ques-

tion; and, after being somewhat darkened by heat, in process of

baking, resembles in color quite closely the lamp last referred to.

Size for japanning purposes, made of common linseed oil—that which

is old very much preferred—and copal varnish and spirits of

81 turpentine, commonly used for holding goid-leaf or powdered

bronze, and used of various degrees of thickness, according to

the roughness or smootliness of the work to which it is applied. All

these compositions, and the manner of using the same, which I have

described are now, and were for many years prior to the date of my

invention, used in the art of japanning. All these coatings and so-

lutions were commonly applied with either hog’s-hair, bear’s-hair,

or camel’s-hair brushes. Sometimes smal! articles were dipped in

solutions made from these compositions. When heat was applied

for the purpose of hardening, what I have described as these differ-

ent solutions all together constitute a great part of the art of Japan-

ning. In regard to thesize—this size is sometimes used without heat

by carriage painters, sign painters, ete., but when heat is used it be-

comes a Japanning process.

Q. 5. Can you make Tucker bronze with either of the preparations

above described ; and, if so, how ?

A. Yes; English lock varnish diluted with four or tive parts of

spirits of turpentine or benzine into which bright iron articles are

dipped, then submitted to the heat deseribed in the patent in ques-

tion, produces very fair Tucker bronze. The size which I have de-

scribed, if allowed to stand after the different parts are mixed together

of which it is composed, as [I have described it, remain a sufficient

length of time to become homogeneous, as it were, then applied in

thin coat with a brush, or other suitable implement, and afterwards

rubbed off thoroughly with a rag, sponge, or other suitable imple-

ment, would make very good Tucker bronze if submitted to the proper

heat.

Q. 6. How long have you been acquainted with the process of

japanuing with the size referred to iu the latter part of your fourth

answer?

A. For more than thirty years.

j

;

SARGENT & COMPANY. 47

Q. 7. Please describe the implements used in japanning.

A. A japanning cup is usually made of tin, very often having a

small wire soldered into the top, and running across, for the purpose

of rubbing the — japan, size, oil, or other solution intended to

be used, from the brush.

Many of these cups, however, are made without the wire,

82 and the brush rubbed over the edge of the cup, which is an

equivalent. The brushes are of various kinds, such as hog’s

hair, camel’s hair bear’s hair, badger’s hair; these dippers, brushes,

and dusters which are made of hog’s hair usually are the implements

used for applying coatings of the materials I have described for

japanning purposes. A japanning kiln is usually high enough for

a grown person to walk in, and six or eight feet long, from four to

six feet broad, furnished with racks at each side on which the bars

rest which hold the work to be baked. This room that I have de-

scribed is sometimes made of brick with iron doors, and sometimes

made of sheet-iron with double walls. The heating apparatus is

sometimes supplied by a stove which sits at one end or one corner

of the room described, with a mouth-piece passing through the wall

for the purpose of feeding or passing in the fuel. There usually runs

from this stove a pipe once or more times around theoven. Another

way of placing the helsing apparatus is to have a tramway running

entirely under the oven, on which is placed an iron carriages which

holds the fire-pot, in which the fire is built and then run under the

oven. In the latter description, however, the wall of this room which

is called a kiln is usually double, and the space between the walls

acts as a flue for the purpose of carrying the smoke from the fire-pot.

This chamber underneath the kiln which contains the tramway-

carriage and fire-pot is all enclosed, making it a tight chamber, with

the exception of an inlet for draught. Directly over this fire-pot,

and forming part of the floor of the centre of the oven, is usually

placed a thick cast-iron plate.

Q. 8. What are the exer advantages of the different processes

now in use for obtaining the patented surface called Tucker bronze?

(Objected to as not matter in rebuttal, and as implying that there

is more than one process of producing the surface called Tucker

bronze.)

A. There are two ways of arriving at the result of what is called

Tucker bronze. The first is that described in the patent. The second

is to polish the surface of the metal, and then submit it to a

83 sufficient heat to raise the color on the surface of the iron,

then placing a coating of oil or oil varnish over the same

and submitting it to heat. The advantage of the second process is,

that it is much less work than the way described in the patent for

producing the same result, and for practical purposes just as good,

Vhere, however, very fine effects are desired, it is better to follow

the description exactly as given in the patent.

Q. 9. What is the effect of the fumes arising from japan goods,

while in the process of japanning, upon the uncoated bright surfaces

of metal pared a :

35 ieee 3 oe is

: ” > ST a a a Hey? Ph

NOS

DO ee RR OD A GN A SAA Be NR hs ee —

)

ein, Oc a Telelalss Ab he werkt -

r

WILLIAM H. PLUMMER, ADM’R, &C., VS.

A. It is to give them a straw color and an iridescent appearance,

like what is sometimesseen upon bronze metal. I have experimen

somewhat with bright brass goods, and have produced very hand-

some colors in this way, but of no value, as there is so little adhesion

between this deposit and the metal that it cannot be covered by var-

nishes or oily solutions for protection. :

(Noon recess.)

Q. 10. Please give us as good an idea as you can as to the relative

fluidity of the various japanning fluidsand the dips used in practis-

ing the Tucker process.

A. In practising the Tucker process the fluids used are very thin,

like water almost, whereas in the jJapanning process they are used

very much thicker. 1 would say, however, in regard to the Tucker

bronze, or the process of naking the Tucker bronze by dipping, that

where benzine is used as a dilutant, owing to its rapid evaporation,

the dip sometimes gets thicker than it ought to be; the result then

will be simply a japan coating, as the material is so thick as not to

admit of the bright iron underneath being oxidized.

Q. 11. Referring to the latter part of your last answer, how is it if

the color be raised on the light metal before dipping ?

A. In that case the result is Tucker bronze, invaribly, provided

the coating which is laid over the oxidized surface is baked by the

japanning process, and the color of the oil or varnish dip be modified

by said baking. :

(Cross-interrogatory by C. E. Mitchell, Esq., of counsel for re-

spondent.) .

S4 Cross-Q. 12. How many times was the operation of oiling

and heating repeated upon Complainant’s Exhibit Tucker

Lamp No. 1? :

A. My impression is three.

Cross-Q. 13. Was the oil applied as directed by your patent ?

A. I have no doubt it was. I did not do it myself. '

Cross-Q. 14. How was the fine polish upon the salient faces ob-

tained ? |

A. By use of emery-wheels of different degrees of fineness. I

think the last fine finish was obtained by a wheel which was first

coverered with flour of emery, and afterwards the wheel so covered

ras stoned down with a smooth stone and oil. I judge this to be

the case from the fact of the lamp’s presenting so fine an appearance.

That was the way this class of work was finished.

Cross-Q. 15. This fine polish and general elegance of finish and

the repetitions of the oiling and heating had somewhat to do, I sup-

pose, with the preserved condition of the lainp; had it not?

A. Undoubtedly.

Cross-Q. 16. Although so finely finished, I suppose that exposure

to the elements, or in any place of some dampness, would have pre-

vented its having the preserved look which it now has ?

A. Yes; if exposed to the sun and rain, or to the action of flies or

BE Sree ME

a

a

SARGENT & COMPANY. 49

fly-dirt, so called, or kept in a damp cellar, the beauty of the finish

would be entirely destroyed in the time this lamp has been finished.

No finish which has ever been discovered wili preserve the face of

cast-iron intact under such circumstances.

Cross-Q. 17. When did you last see the top of this lamp No. 1?

A. Yesterday; I removed it from this part on exhibition.

Cross-Q. 18. Why did you remove the top from lamp No. 1 and

not from lamp No. 2?

A. Because the top of lamp No. 1 had become very much defaced

from constant wiping in the fifteen years the lamp has been in use

was one reason why I did not bring it. Another reason was that

I was in a hurry and did not wish to stop for the lamp to be

emptied and cleansed.

85 Cross-Q. 19. Will you produce that top of Complainant’s

Exhibit Tucker Lamp No. 1 which you removed on account

of its defacement ?

A. Yes, with pleasure.

(Counsel gives notice that he desires to have it produced.)

Cross-Q. 20. Did it not occur to you that it was hardly the fair

thing to remove this lamp-top when the avowed object of producing

these lamp exhibits was to show how well Tucker bronze withstands

the effects of use ’

A. No, it did not; I never claim for this finish that it will with-

stand for a long time abrasion by cleaning; I have given you the

exact truth; no more, no less.

Cross-Q. 21. How many repetitions of the process was lamp No. 2

subjected to ?

A. Three, I believe.

Cross-Q. 22. It is a little coarser in finish than lamp No. 1, is it

not?

A. Yes, a great deal coarser.

Cross-Q. 23. Was it subjected to a higher heat?

A. I think it was, from its appearance.

Cruss-Q. 24. I notice upon the base a place where the knife has

evidently been employed to remove a portion of the fititsh, evidently

very much changed from what it was originally. Had you noticed

it before?

A. I had not.

Cross-Q. 25. You see, do you not, that the spot to which I have

directed attention has become very much changed from what it

originally was, and that the changed surface has been apparently

scraped off?

A. I do.

Cross-Q. 26. Do you notice a brownish look, having a general re-

semblance to umber, surrounding the scraped portion ?

A. No, not umber; but vankyke brown 1s what I should compare

it to.

Cross-Q. 27. I suppose no preparation whatever was applied to

these lamps before the salient surfaces were ground?

i—37

Sco hs aa al hha Ran OR ta ESS Dit bE hd bit Posies

»

Des ey ae ¢ ade

Me a ST * Shs"78 ?

50 WILLIAM H. PLUMMER, ADM’R, &C., VS.

A. I have no knowledge that there was. I don’t think from the

appearance that there was.

86 Cross-Q. 28. What degree of heat did you employ in the

small oven which you built, and by which vou succeeded in

producing a fine black coating upon iron, as stated by you in inter-

rogatory 3?

A. From four to five hundred, I should say; possibly more than

that.

Cross-Q. 29. And you applied linseed oil containing ivory-black

to the iron, and rubbed it off thoroughly with a common shoe-brush

before baking, did you? :

A. I did.

Cross-Q. 30. To what extent did you practise this art?

A. We sold quite a large quantity of goods finished in that way.

Cross-Q. 31. Was the scale removed from the iron ?

A. It was in some cases. :

Cross-Q. 32. When was this?

A. As far back as 1849—possibly the latter part of 1848.

Cross-Q. 33. So far as I can see, this process differed from your

patented process only in the fact that ivory-black was intermixed

with the linseed oil. Am I right?

A. Not exactly. Oil put on with a brush to bright iron very

thinly indeed, from a japanner’s point of view, and then rubbed off

with an ordinary stiff shoe-brush, would not be taken for a surface

resembling bronze metal, owing to its streakiness and unevenness.

It wouldn’t be as good or as valuable as a surface for iron as the

old and well-known thin coating of Japan baked over a bright sur-

face of iron, and such as I have referred to in my testimony, al-

though a coating of oil applied with a brush, then rubbed off with

a common shoe-brush, as I have described, would contain oxidized

oil and oxidized metal, which are the elements of my patent.

Cross-Q. 34. In this old process, practised in 1849 by you, the iron

was polished smooth enough, and the oil and mixture was applied

thin enough, and the heat was applied high enough, to make Tucker

bronze, and the result would have been Tucker bronze but for the

ivory-black in the linseed oil. Is not that correct?

A. No, itis not. I willexplain. As I said before, the oil,

87 when applied, or finished off, on those goods with the shoe-

brush, no bronze surface, or no surface which looked like

bronze metal, would result from the crude way in which these goods

were handled.

Cross-Q. 35. In the old process, practised in 1849, the iron was

polished smooth enough for use in the Tucker process, was it not?

A. It was.

Cross-Q. 56. The black solution was put on thin enough for use

in the Tucker process, was it not?

A. It was.

Cross-Q. 37. And the heat was applied high enough for the Tucker

process, Was it not?

A. It was.

Cross-Q. 38. The result would have been what you now call Tucker

:

SARGENT & COMPANY. 51

bronze of a greater or lesser degree of excellence but for the presence

of the ivory-black, would it not?

A. It would not have come within those terms. There was

nothing excellent nor agreeable tu the eye about the surface, although

I admit that there was oxidized iron in that surface. I mean that

if the ivory-black had been left out of this process that the result

would have been a streaky surface of burnt oi] mixed with oxidized

iron, not suggesting a bronze finish.

Cross-Q. 39. I do not understand your last answer. Please hear

cross-q. 3d, 36, 37, and 38 read once more, and see if you can

truthfully say that the steps referred to in the first three questions

would not have involved the process described in your letters patent

No. 2355 but for the presence of the ivory-black.

A. I can only repeat that such treatment would have resulted in

a spoiled surface; but I will admit that the same quantity of oil

used with the heat as described would have produced good Tucker

bronze if laid upon the iron in a proper manner.

Cross-Q. 40. You say, in reply to Q. 4, referring to this bronze in

question, “I, immediately after the discovery of this invention,

began to manufacture the patented goods.” When was that?

88 A. Well, I began to manufacture them before patented. I

think in 1862, perhaps a little earlier.

Cross-Q. 41. You say, “I, immediately after the discovery of this

invention, began to manufacture the patented goods.” How long a

time do you include in the expression “immediately after?”

A. Well, I should say I began to manufacture the same afternoon

or the next morning. |

Cross-Q. 42. You say in reply to Q. 4, that you again began this

series of experiments about 1860 or 186]. Did you not muake the

discovery of the invention before 1562?

A. Thereabouts; not long before.

Cross-Q. 43. Did you not make the invention and begin to prac-

tise the process in the manufacture of goods in 15617

A. It is possible. I haven't refreshed my memory by referring

to any data, which I ought to do to testify particularly, as my mem-

ory of dates is quite poor. But it’s some time in the: neighborhood

of 1862; it might have been 1861. I wouldn't swear positively as

to that without looking.

Cross-Q. 44. What were the very first articles that you manufac-

tured by the process in question, and where were they done, whether

it was In 186] or 1862?

A.» The very first article, I believe, was a bedstead, au iron bed-

stead. I was to work over a corner-piece of the bedstead when I

first struck the inventien, and immediately, I think the same after-

nvon, polished the rest of it, and did it — Tucker bronze. I will not

swear positively that this bedstead was the very first thing cot-

pleted, but think it was. These articles were first made at Charles-

ton State Prison, Massachusetts. I have seid “ these articles,” the

bedstead the first, the next articles some picture-frames, and soon

after I began to make kerosene goods—very soon after.

Cross-Q. 45. In what business were you at that time engaged ?

‘pia a Regt ne OS Thtn ie ip ae DE PAG LF

eee Cantera aa aero oat eter sera mee

52 WILLIAM H. PLUMMER, ADM’R; 4&C., VS.

A. Manufacturing iron bedsteads with a patent spring-bottom for

the use of the surgeon general’s department, U.S. A. I was a con-

tractor at that time for the labor of the prisoners at that institu-

tion.

89 Cross-Q. 46. When did your bedstead contract run out ?

A. I am unable to state without looking at data. My im-

pression, however, is that it was about 1864.

Cross-Q. 47. What became of this bedstead to which you first ap-

plied the Tucker process?

A. My impression is that I carried that bedstead home for my

own use; but I will not be positive.

Cross-Q. 48. Who saw it at the prison ? :

A. A man who was in my employ by the name of Stead. I don’t

remember his Christian name. I presume many others. I did not

keep it secret at all. :

Cross-Q. 49. How soon was the process applied to lamp or chande-

lier work ?

A. I think we began to make patterns for that class of work as

early as 1863, perhaps earlier. We were well prepared with a line

of goods, I think, as early as 1865. There was as much as two years

consumed in getting things ready. 3

Cross-Q. 50. Was the process applied to builders’ hardware before

1568 to any considerable extent, if at all ?

A. It was applied to builders’ hardware, but not to any great ex-

tent, except to brackets.

Cross-Q. 51. In reply to interrogatory 5, you say for substance that

the size (composed of linseed oil, copal varnish, and turpentine) prop-

erly applied would make very good Tucker bronze if submitted to

proper heat. Have vou ever testified otherwise ?

A. I don’t think L ever did when the composition of which the

size was made has been allowed to lay a sufficient time before being

used.

Cross-Q. 52. Is the second process described by you in answer to

interrogatory 5 less expensive than the one deseribed in the patent?

A. It is.

Cross-Q. 53. Considerably so?

A. Yes. j

Cross-. 54. You say in reply to interrogatory 10 that in practis-

ing the Tucker process the fluids used are very thin, like water,

almost. Does your patent say anything about thinning the lin-

seed oil”

My A. It does not. The thinning is only another way of getting

vu an extremely thin coat.

Cross-Q. 55. Would not a person reading your patent understand

that the linseed oil was to be applied in its normal condition, and

that the requisitely thin coat was to be obtained by rubbing

thoroughly with a rag, sponge, or other suitable implement ?

A. They would.

Cross-Q. 96. In what arts and manufactures was oxidation of the

surface of the metal produced by heat emploved in finishing the

surface before the date of your invention ? :

=

SARGENT & COMPANY. 53

A. Tools made of steel, gun and pistol barreis, small trimmings

to fire-arins, both of steel and SE iron. I never knew articles

of cast iron to be ornamented in this way.

Cross-Q. 57. Clock pointers, steel pens, fish-hooks, and other ur-

ticles were so surfaced, in addition to those already mentioned by

you, were they not?

A. Yes; and watch-springs also.

Cross-Q. 58. You do not regard your process as limited to cast

iron as opposed to wrought iron, or even steel, do you ?

(Objected to as incompetent.)

A. I shouldn’t like to answer that question, as it seems to mea

question of construction. I don’t wish te commit myself.

Cross-Q. 59. What significance do vou associate with the distine-

tion between cast iron and wrought iron, which you make in your

reply to cross-q. 36? Do you regard it us in any way material to

this inquiry?

A. It may be for the reason that quite a permanent color may be

preduced upon wrought iron and steel without the addition of oil

and heat on the same, whereas on cast iron (being a much coarser

metal) these colors raised by heat are very fugitive and of no value

whatever.

Cross-Q. 60. On what article of wrought iron-is the oxidized sur-

face left wholly unprotected by any protecting substance whatever,

where a permanent finish is desired ?

A. On the article of screws, principally. if I recollect rightly. I

don’t recall any other article at this moment, except gun-barrels

and trimmings used about gun-barrels.

1 Cross-Q. 61. Was no substance whatever used in connection

with oxidation as a finish for gun-barrels at and prior to the

date of your patent?

A. Sometimes there was, and sometimes there was not.

Cross-Q. 62. Who made gun-barrels without in any way protect-

ing the oxidized surface ?

A. I am not able to state.

(The witness produces the lamp-top called for and marked Tucker

Lamp-Top.)

Cross-Q. 63. I see that the oxidation is nearly all removed from

the top of this lamp-top—as I presume, by scouring it to make it

clean. Are my surmises right, so far as you know?

A. They are.

HIRAM TUCKER.

Before me—

J. B. MILLS, Special Examiner

ott

ath “ y ~ 4% ~* * 4 ~ ‘ é ? ° a ye * > et sae. > oe

MSMR SGA lake” Tagg aN PP Fe MOE jy MEADE S tie el AD aah RE EOE cle: senior bine WORE. ors

eat Dog egnis

spe Sie AR OE AIR A RIE at PA Nels OER OD cia x PRie RIM N BE asa NT ae BA ea tet BY eS

Oe Are

WILLIAM H. PLUMMER, ADMR, &C., VS.

Tucker Exuisit A A. John C. Lane, Spec. Ex’r.

TUCKER v. SARGENT.

DEPARTMENT OF THE INTERIOR,

UNITED STATES

This text is long and has been trimmed here. Open the source document for the complete record.

This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.

A word about cookies

We need a few to keep you signed in and the library working. The rest help us see which pages people use and where they get stuck. They stay off unless you say yes.

Record and brief — William H. Plummer, Administrator of Hiram Tucker, Deceased, Appellant, vs. Sargent and Company | Frix