Instructions for Form 8933
Agency decision
Ask Donna
What actually matters in this document.
Text
Instructions for Form 8933
(Rev. December 2025)
Carbon Oxide Sequestration Credit
Section references are to the Internal Revenue Code
unless otherwise noted.
of the credit. See Pre-filing registration requirement for
payments or transfers, later.
Future Developments
Analysis of lifecycle greenhouse gas emissions
(LCA). Notice 2024-60 updated required procedures to
claim a section 45Q credit for utilization of carbon oxide.
See Approval of the LCA, later.
For the latest information about developments related to
Form 8933 and its instructions, such as legislation
enacted after they were published, go to IRS.gov/
Form8933.
What’s New
Credit rates and applicable dollar amounts. The
sections 45Q(a)(1) and (a)(2) credit rates for Part III are
adjusted for inflation and increased, per Notice 2025-25.
The applicable dollar amounts for Part III are established
by linear interpolation between statutory dollar amounts
and increased, per Notice 2018-93. The new applicable
dollar amounts for Part III are established by the Inflation
Reduction Act of 2022 (IRA 2022). See 2025 inflation
adjusted credit rates and applicable dollar amounts, later.
New credit rate for facilities or equipment placed in
service after July 4, 2025. Public Law 119-21,
commonly known as the One Big Beautiful Bill Act,
standardized the base credit amount at $17 per metric ton
for facilities that capture carbon dioxide for different uses
and utilization of qualified carbon oxide. For facilities or
equipment placed in service after July 4, 2025, and before
2027, the credit is $17 per metric ton of qualified carbon
oxide.
Prohibited foreign entities. No carbon oxide
sequestration production credit is allowed for any tax year
beginning after July 4, 2025, if the taxpayer is a specified
foreign entity as defined in section 7701(a)(51)(B). No
carbon oxide sequestration credit is allowed for any tax
year beginning after July 4, 2025, if the taxpayer is a
foreign-influenced entity as defined in section 7701(a)(51)
(D), without regard to clause (i)(iii).
Form 7220, Prevailing Wage and Apprenticeship
(PWA) Verification and Corrections. For each qualified
facility for which you produced qualified carbon oxide and
are claiming the increase credit amount for meeting the
prevailing wage and apprenticeship requirements, you
must file a separate Form 7220. For more information, see
the Instructions for Form 7220.
Displacement factor. The displacement factor (DF)
measures the amount of carbon oxide equivalent
displaced per unit of carbon oxide captured and utilized.
The difference between the two is limited by the DF and
limits the credit. See Line 3g, later.
Reminders
Pre-filing registration. The IRS has established a
pre-filing registration process to elect payment or transfer
Jan 7, 2026
General Instructions
Purpose of Form
Use Form 8933 to claim the section 45Q carbon oxide
sequestration credit. See Definitions, later.
For purposes of this form, a partner in a partnership
that has made a valid section 761(a) election will be
considered the taxpayer. Partnerships with valid section
761(a) elections aren’t required to complete or file this
form. Instead, the partner is required to complete and file
this form in a manner commensurate with its undivided
ownership interest in the facility. Also, see Rev. Proc.
2020-12, 2020-11, I.R.B. 511, available at IRS.gov/irb/
2020-11_IRB#REV-PROC-2020-12, for allocation safe
harbor. However, if you elect to use the January 2021
Treasury Decision (TD) 9944, the section 761(a) election
applies only in the case of qualified carbon oxide captured
using equipment that’s originally placed in service at a
facility before February 9, 2018. For qualified carbon oxide
captured using equipment that’s originally placed in
service at a facility on or after February 9, 2018, for each
single process train of equipment (as described in
Regulations section 1.45Q-2(c)(3)), only one taxpayer will
be considered the person to whom the credit is
attributable and only that person may claim the credit. See
Regulations section 1.45Q-1(h)(1).
Taxpayers other than partnerships or S corporations
whose only source of this credit is from those
pass-through entities (other than a partnership with a valid
761(a) election) aren’t required to complete or file this
form. Instead, report this credit directly on line 1x in Part III
of Form 3800, General Business Credit.
How To Figure the Credit
Subject to the section 45Q(f)(3)(B) election (discussed
later), section 45Q(a)(1) allows a credit of $20 per metric
ton of qualified carbon oxide captured by you using
equipment that’s (1) originally placed in service at a facility
before February 9, 2018, (2) disposed of by you in secure
geological storage, and (3) not used by you as a tertiary
injectant in an enhanced oil recovery (EOR) or natural gas
recovery project or utilized by you in a manner described
in section 45Q(f)(5).
Section 45Q(a)(2) allows a credit of $10 per metric ton
of qualified carbon oxide (1) captured by you using
equipment that’s originally placed in service at a facility
before February 9, 2018; and (2) either (a) used by you as
Instructions for Form 8933 (Rev. 12-2025) Catalog Number 74390F
Department of the Treasury Internal Revenue Service www.irs.gov
a tertiary injectant in an EOR or natural gas recovery
project and disposed of by you in secure geological
storage, or (b) utilized by you in a manner described in
section 45Q(f)(5).
Section 45Q(a)(3) allows a credit of the applicable
dollar amount (as determined under section 45Q(b)(1))
per metric ton of qualified carbon oxide (1) captured by
you using equipment that’s originally placed in service at a
facility on or after February 9, 2018, during the 12-year
period beginning on the date the equipment was originally
placed in service, (2) disposed of by you in secure
geological storage, and (3) neither used as a tertiary
injectant in an EOR or natural gas recovery project nor
utilized in a manner described in section 45Q(f)(5).
Section 45Q(a)(3) allows a credit of the applicable
dollar amount (as determined under section 45Q(b)(1)) (a)
used by you as a tertiary injectant in an EOR or natural
gas recovery project and disposed of by you in secure
geological storage, or (b) utilized in a manner described in
section 45Q(f)(5).
For purposes of determining the credit, you may elect
under section 45Q(b)(3) to have the dollar amounts
applicable under section 45Q(a)(1) or (2) apply instead of
the dollar amounts applicable under section 45Q(a)(3) or
(4) for each metric ton of qualified carbon oxide that’s
captured by you using equipment that’s originally placed
in service at a facility on or after February 9, 2018.
For the purpose of calculating the credit, a metric ton of
carbon oxide includes only the contained weight of the
carbon oxide. The weight of any other substances, such
as water or impurities, isn’t included in the calculation.
2025 inflation adjusted credit rates and applicable
dollar amounts. If you elect under section 45Q(b)(3) to
apply the $10 and $20 rates, the credit rates for Part III are
increased by the adjustment for inflation. The rates are as
follows.
• $28.43 per metric ton for line 1g.
• $14.21 per metric ton for lines 2g and 3i.
See Notice 2025-25, 2025-20 I.R.B. 1445, available at
IRS.gov/irb/2025-20_IRB#NOT-2025-25.
For any tax year after 2016, the section 45Q(b)(1)(A)
(as in effect before August 16, 2022) applicable dollar
amounts for Part III are established by linear interpolation
between $22.66 and $50, and $12.83 and $35,
respectively. The applicable dollar amounts for Part III are
as follows.
• $46.96 per metric ton for line 1g.
• $32.54 per metric ton for lines 2g and 3i.
See Notice 2018-93, 2018-51 I.R.B. 1041, available at
IRS.gov/irb/2018-51_IRB#NOT-2018-93.
For any tax year after 2022, and before July 5, 2025,
the section 45Q(b)(1)(A) applicable dollar amounts for
Part III are as follows.
• $17 per metric ton for line 1g.
• $12 per metric ton for lines 2g and 3i.
After July 4, 2025, the section 45Q(b)(1)(A) applicable
dollar amount for Part III is $17 per metric ton for lines 1g,
2g, and 3i. For tax year 2026, the applicable dollar amount
is $17 multiplied by an inflation adjustment factor.
2
For any tax year after 2022, the section 45Q(b)(1)(B)
applicable dollar amounts for DAC facilities for Part III are
as follows.
• $36 per metric ton for line 1g.
• $26 per metric ton for lines 2g and 3i.
Facilities or any equipment installed at a facility and
placed in service after 2022 that satisfy certain
requirements may claim an increased credit amount. See
Increased Credit Amount for Facilities and Equipment and
the specific instructions for lines 1g, 2g, and 3i, later.
Amount captured by additional carbon capture
equipment on qualified facility. For a qualified facility
placed in service before February 9, 2018, for which
additional carbon capture equipment is placed in service
on or after February 9, 2018, the amount of qualified
carbon oxide that’s captured by you is the following.
• For purposes of sections 45Q(a)(1)(A) and (2)(A), equal
to the lesser of (a) the total amount of qualified carbon
oxide captured at such facility for the tax year, or (b) the
total amount of the carbon dioxide capture capacity of the
carbon capture equipment in service at such facility on the
day before February 9, 2018.
• For purposes of sections 45Q(a)(3)(A) and (4)(A), an
amount (not less than zero) equal to the excess of (a) the
total amount of qualified carbon oxide captured at such
facility for the tax year, over (b) the total amount of the
carbon dioxide capture capacity of the carbon capture
equipment in service at such facility on the day before
February 9, 2018.
Applicable entities. Applicable entities as defined under
section 6417(d)(1)(A) that generally don’t benefit from
income tax credits can elect to treat the credit for a facility
or equipment installed in a facility and placed in service
after 2022 as a payment of income tax. Resulting
overpayments may result in refunds.
Applicable entities making the elective payment
election (EPE) for the credit must file the following.
• Form 8933, with all required schedules and statements.
• Form 3800, General Business Credit.
• Form 990-T, Exempt Organization Business Income Tax
Return, or other applicable income tax return.
For a discussion of who is considered an applicable
entity, see Applicable entity making an EPE on IRA 2022
credits in the Instructions for Form 3800. For more
information on EPEs under section 6417, see Elective
Payment of Certain Business Credits Under Section 6417
or Section 48D in the Instructions for Form 3800.
If you’re an applicable entity, your election to treat the
credit as a payment generally applies to 2025 and any
subsequent year during the 12-year period described in
section 45Q(a)(3)(A) or (4)(A) for such equipment. You
must obtain an IRS-issued registration number for the
equipment in 2025 and each of the succeeding years.
Taxpayers electing to be treated as applicable entities. If you aren’t an applicable entity, you can also elect
to treat the credit as a payment of taxes on your return.
Section 6417(d)(1)(C) allows an electing taxpayer,
including a partnership and an S corporation under
section 6417(c), to treat the credit for a facility or
equipment installed in a facility and placed in service after
2022 as a payment or deemed payment of taxes.
Instructions for Form 8933 (Rev. 12-2025)
For a discussion of who is considered an electing
taxpayer, see the Instructions for Form 3800. For more
information on EPEs under section 6417, see Elective
Payment of Certain Business Credits Under Section 6417
or Section 48D in the Instructions for Form 3800.
If you make a section 6417(d)(1)(C) election, the
election generally applies to 2025 and the 4 succeeding
years (unless you revoke your election).
Caution: If you’re a partnership or an S corporation that
elected to treat the credit for a new facility or equipment as
a payment of taxes, you must report the total credit
amount on Form 3800. See the specific instructions for
line 9 of Part III.
Credit transfers. Under section 6418, eligible taxpayers,
partnerships, and S corporations can elect to transfer all
or part of the credit for a new or existing facility or
equipment to an unrelated third party in exchange for
cash. For more information on credit transfers, see
Transfer of Eligible Credits Under Section 6418 in the
Instructions for Form 3800.
Caution: If you’re a partnership or an S corporation
electing to transfer the credit (or portion thereof), you must
report the total credit amount on Form 3800. See the
specific instructions for line 9 of Part III.
Pre-filing registration requirement for payments or
transfers. Before you file your tax return, if you intend to
make an EPE or transfer election on Form 3800 for the
credit figured in Part III, you must complete a pre-filing
registration for each facility. To register, go to IRS.gov/
Register for elective payment or transfer of credits. See
Pub. 5884, Inflation Reduction Act (IRA) and CHIPS Act of
2022 (CHIPS) Pre-Filing Registration Tool. Also see
Registering for and Making Elective Payment and Transfer
Elections in the Instructions for Form 3800.
Definitions
Applicable electric generating unit. An applicable
electric generating unit is the principal electric generating
unit for which the equipment is originally planned and
designed.
Baseline carbon oxide production. A baseline carbon
oxide production means either of the following.
• In the case of an applicable electric generating unit that
was originally placed in service more than 1 year prior to
the date on which construction of the equipment begins,
the average annual carbon oxide production, by mass,
from such unit during (i) in the case of an applicable
electric generating unit that was originally placed in
service more than 1 year prior to the date on which
construction of the equipment begins and on or after the
date that’s 3 years prior to the date on which construction
of such equipment begins, the period beginning on the
date such unit was placed in service and ending on the
date on which construction of such equipment began; and
(ii) in the case of an applicable electric generating unit that
was originally placed in service more than 3 years prior to
the date on which construction of the equipment begins,
the 3 years with the highest annual carbon oxide
production during the 12-year period preceding the date
on which construction of such equipment began.
Instructions for Form 8933 (Rev. 12-2025)
• In the case of an applicable electric generating unit that
(i) as of the date on which construction of the equipment
begins, is not yet placed in service; or (ii) was placed in
service during the 1-year period prior to the date on which
construction of the equipment begins, the designed
annual carbon oxide production, by mass, as determined
based on an assumed capacity factor of 60%.
Capacity factor. Capacity factor means the ratio
(expressed as a percentage) of the actual electric output
from the applicable electric generating unit to the potential
electric output from such unit.
Carbon capture equipment. This includes all
components of property that are used to capture or
process carbon oxide until the carbon oxide is transported
for disposal, injection, or utilization. Carbon capture
equipment is equipment used for the purpose of (1)
separating, purifying, drying, and/or capturing carbon
oxide that would otherwise be released into the
atmosphere from an industrial facility; (2) removing carbon
oxide from the atmosphere via DAC; or (3) compressing or
otherwise increasing the pressure of carbon oxide.
All components that make up an independently
functioning process train capable of capturing,
processing, and preparing carbon oxide for transport will
be treated as a single unit of equipment (single process
train). See Rev. Rul. 2021-13, 2021-30 I.R.B. 152,
available at IRS.gov/irb/2021-30_IRB#REV-RUL-2021-13.
Direct air capture (DAC) facility. A DAC facility means
any facility that uses carbon capture equipment to capture
carbon oxide directly from the ambient air. It doesn’t
include any facility that captures carbon dioxide (1) that’s
deliberately released from naturally occurring subsurface
springs, or (2) using natural photosynthesis.
Electricity generating facility. An electricity generating
facility is a facility described in section 45Q(d)(2)(A) or (B)
and is subject to depreciation under MACRS asset class
49.11 (Electric Utility Hydraulic Production Plant), 49.12
(Electric Utility Nuclear Production Plant), 49.13 (Electric
Utility Steam Production Plant), or 49.15 (Electric Utility
Combustion Turbine Production Plant).
Facility. Any industrial facility or DAC facility (a) the
construction of which begins before January 1, 2033, and
the construction of carbon capture equipment begins
before that date, or the original planning and design for the
facility includes installation of carbon capture equipment;
and (b) that captures:
1. In the case of a DAC facility, captures not less than
1,000 metric tons of qualified carbon oxide during the tax
year;
2. In the case of an electricity generating facility that (i)
captures not less than 18,750 metric tons of qualified
carbon oxide during the tax year; and (ii) for any carbon
capture equipment for the applicable electric generating
unit at such facility, has a capture design capacity of not
less than 75% of the baseline carbon oxide production of
such unit; or
3. In the case of any other facility, captures not less
than 12,500 metric tons of qualified carbon oxide during
the tax year.
3
Industrial facility. An industrial facility is a facility that
produces a carbon oxide stream from a fuel combustion
source or fuel cell, a manufacturing process, or a fugitive
carbon oxide emission source that, absent capture and
disposal, would otherwise be released into the
atmosphere as industrial emission of greenhouse gas or
lead to such release. An industrial facility doesn’t include a
facility that produces carbon dioxide from carbon dioxide
production wells at natural carbon dioxide-bearing
formations or a naturally occurring subsurface spring.
Depending on your election to use the June 2020 Notice
of Proposed Rulemaking (NPRM) or the TD, see section
3.02(b) of Notice 2009-83 or Regulations section
1.45Q-2(d)(1) and (d)(2).
An industrial source is an emission of carbon oxide
from an industrial facility.
A manufacturing process is a process involving the
manufacture of products, other than carbon oxide, that are
intended to be sold at a profit, or are used for a
commercial purpose. All facts and circumstances for the
process and products are to be taken into account.
Natural gas. Natural gas means any product (other than
crude oil) of an oil or gas well if a deduction for depletion is
allowable under section 611 for such product.
Qualified carbon oxide. This is (a) any carbon dioxide
captured from an industrial source by equipment originally
placed in service before February 9, 2018, which would
otherwise be released into the atmosphere as industrial
emission of greenhouse gas or lead to such release, and
is measured at the source of capture and verified at the
point of disposal, injection, or utilization; (b) any carbon
dioxide or other carbon oxide that’s captured from an
industrial source by equipment originally placed in service
on or after February 9, 2018, which would otherwise be
released into the atmosphere as industrial emission of
greenhouse gas or lead to such release, and is measured
at the source of capture and verified at the point of
disposal, injection, or utilization; or (c) in the case of a
DAC facility, any carbon dioxide that’s captured directly
from the ambient air, and is measured at the source of
capture and verified at the point of disposal, injection, or
utilization.
Qualified carbon oxide includes the initial deposit of
captured carbon oxide used as a tertiary injectant. It
doesn’t include carbon oxide that’s recaptured, recycled,
and re-injected as part of the EOR and natural gas
recovery process.
Qualified EOR or natural gas recovery project. An
EOR or natural gas recovery project means any project
located in the United States involving the application of
one or more tertiary recovery methods defined in section
193(b)(3) that can reasonably be expected to result in
more than an insignificant increase in the amount of crude
oil or natural gas that will ultimately be recovered and for
which the first injection of liquids, gases, or other matter
begins after 1990.
Secure geological storage. Secure geological storage
includes, but isn’t limited to, storage at deep saline
formations, oil and gas reservoirs, and unminable coal
seams.
4
If you’re claiming a credit for a facility placed in service
before February 9, 2018, the following applies.
• Secure geological storage requires approval by the U.S.
Environmental Protection Agency (EPA) of a Monitoring,
Reporting, and Verification Plan (MRV Plan) submitted by
the operator of the storage facility or tertiary injection
project.
• The annual amount of carbon oxide claimed for the
credit must be consistent with amounts reported to the
EPA under its Greenhouse Gas Reporting Program,
subpart RR.
See Sections 6 through 8 of Notice 2009-83, 2009-44
I.R.B. 588, available at IRS.gov/irb/
2009-44_IRB#NOT-2009-83 for reporting and
recordkeeping requirements associated with the limitation
on credits available under former section 45Q(a) (as in
effect before February 9, 2018) and sections 45Q(a)(1)
and (2). Sections 1 through 5 of Notice 2009-83 were
obsoleted by REG-112339-19, 85 F.R. 34050-34075. After
the end of the calendar year in which the Secretary, in
consultation with the Administrator of the EPA, certifies
that a total of 75,000,000 metric tons of qualified carbon
oxide have been taken into account under former section
45Q(a) (as in effect before February 9, 2018) and sections
45Q(a)(1) and (2), the remaining sections of Notice
2009-83 will be obsoleted. Also, see Notice 2022-38,
2022-39 I.R.B. 239, available at IRS.gov/irb/
2022-39_IRB#NOT-2022-38.
If you’re claiming a credit for a facility that was placed in
service in tax years beginning on or after February 9,
2018, qualified carbon oxide is considered disposed of by
you in secure geological storage such that the qualified
carbon oxide doesn’t escape into the atmosphere if the
qualified carbon oxide is:
• Stored, and not used as a tertiary injectant in an EOR or
natural gas recovery project, in compliance with
applicable requirements under 40 CFR Part 98 subpart
RR;
• Used as a tertiary injectant in an EOR or natural gas
recovery project and stored in compliance with applicable
requirements under 40 CFR Part 98 subpart RR, or the
International Organization for Standardization (ISO)
standards endorsed by the American National Standards
Institute (ANSI) under CSA/ANSI ISO 27916:19, Carbon
dioxide capture, transportation, and geological
storage—Carbon dioxide storage using enhanced oil
recovery (CO2-EOR); and
• Injected into a well that complies with applicable
Underground Injection Control regulations onshore or
offshore under submerged lands within the territorial
jurisdiction of the United States.
Supplier. For qualified carbon oxide, supplier means the
person who captured the qualified carbon oxide, which
may differ from the company that sold the qualified carbon
oxide or physically delivered the qualified carbon oxide to
the owner of the geological disposal site or the utilization
facility.
Tertiary injectant. An injectant (other than a
hydrocarbon injectant that’s recoverable) that’s used as
part of a tertiary recovery method. For more details, see
section 193(b).
Instructions for Form 8933 (Rev. 12-2025)
United States and U.S. territories. This includes the
seabed and subsoil of those submarine areas that are
adjacent to the territorial waters of the United States (or a
U.S. territory) and over which the United States has
exclusive rights, in accordance with international law, for
the exploration and exploitation of natural resources.
Utilization of qualified carbon oxide. Utilization of
qualified carbon oxide means (1) the fixation of such
qualified carbon oxide through photosynthesis or
chemosynthesis, such as through the growing of algae or
bacteria; (2) the chemical conversion of such qualified
carbon oxide to a material or chemical compound in which
such qualified carbon oxide is securely stored; or (3) the
use of such qualified carbon oxide for any other purpose
for which a commercial market exists (with the exception
of use as a tertiary injectant in an EOR or natural gas
recovery project), as determined by the Secretary of the
Treasury or his delegate.
Who Can Claim the Credit
The credit is attributable to you in the case of qualified
carbon oxide captured using equipment that’s originally
placed in service at a facility on or after February 9, 2018,
if you’re the person that owns the equipment and
physically or contractually ensures the disposal, utilization,
or use as a tertiary injectant of this qualified carbon oxide.
Elections
Section 45Q(b)(3) Election
You can elect to have the inflation adjusted credit rates
instead of the applicable dollar amounts apply to Part III
for each metric ton of qualified carbon oxide that’s
captured by you using equipment that’s originally placed
in service at a facility on or after February 9, 2018.
Section 45Q(f)(6) Election
For purposes of section 45Q, for any tax year in which
such facility is an applicable facility (a facility placed in
service before February 9, 2018, and for which no
taxpayer claimed a section 45Q credit for any tax year
ending before February 9, 2018) that captures not less
than 500,000 metric tons of qualified carbon oxide during
the tax year, you can elect to have the facility, and any
equipment placed in service at the facility, treated as
placed in service on February 9, 2018.
You can make a section 45Q(f)(6) election by filing a
statement of election with your income tax return for each
tax year in which the credit arises. In addition to any
information required on Form 8933, your statement of
election must show your name, address, taxpayer
identification number, location, and the identification
number(s) assigned to the facility by the EPA’s electronic
Greenhouse Gas Reporting Tool (e-GGRT ID number(s))
(if available).
EPA e-GGRT ID number(s) are identification number(s)
assigned to the facility by the EPA’s electronic
Greenhouse Gas Reporting Tool.
Section 45Q(f)(3)(B) Election
In the case of qualified carbon oxide captured using
equipment that’s originally placed in service at a facility
Instructions for Form 8933 (Rev. 12-2025)
before February 9, 2018, if you’re the person that captures
and physically or contractually ensures the disposal,
injection, or utilization of the qualified carbon oxide, the
credit is attributable to you. You may claim the credit, or
you may elect to allow the credit to the person that
disposes of, injects, or utilizes the qualified carbon oxide.
If you make this election, the amount you elect to allow
won’t be allowed to you. You can also elect to allow only
part of the credit to the person that disposes of, injects, or
utilizes the qualified carbon oxide in a tax year, and to
claim the remainder yourself.
In the case of qualified carbon oxide captured using
equipment that’s originally placed in service at a facility on
or after February 9, 2018, if you’re the person that owns
the equipment and physically or contractually ensures the
capture and disposal, utilization, or use as a tertiary
injectant of such carbon oxide, you may check the box to
elect to allow the credit to another person that disposes of,
injects, or utilizes the qualified carbon oxide. If you make
this election, the amount you elect to allow won’t be
allowed to you. You can also elect to allow only part of the
credit to the person that disposes of, injects, or utilizes the
qualified carbon oxide in a tax year, and to claim the
remainder yourself.
A new section 45Q(f)(3)(B) election must be made
annually. You make a section 45Q(f)(3)(B) election by
filing a Schedule E (Form 8933), no later than the time
prescribed by law (including extensions) for filing your
federal income tax return or Form 1065, U.S. Return of
Partnership Income, for the year in which the credit arises.
You must make a separate election for each facility.
Caution: The election may not be filed with an amended
federal income tax return, an amended Form 1065, or an
Administrative Adjustment Request (AAR), as applicable,
after the prescribed date (including extensions) for filing
the original federal income tax return or Form 1065 for the
year, with the exception of amended federal income tax
returns, amended Forms 1065, or AARs, as applicable, for
any tax year ending after February 9, 2018, and beginning
on or before January 13, 2021. The amended federal
income tax return or the amended Form 1065 must be
filed, in no event, later than the applicable period of
limitations on assessment for the tax year for which the
amended federal income tax return or Form 1065 is being
filed.
Information required to be provided by electing taxpayer.
• Election statement of the electing taxpayer on Form
8933 and Schedule E (Form 8933) must indicate that an
election is being made under section 45Q(f)(3)(B);
• The electing taxpayer must provide each credit claimant
with a copy of the electing taxpayer’s Schedule E (Form
8933); and
• The electing taxpayer must, in addition to any
information required on Form 8933 and Schedule E (Form
8933), set forth the following information.
1. The electing taxpayer’s name, address, taxpayer
identification number, location, and e-GGRT ID number(s)
(if available) of each facility where carbon oxide was
captured;
5
2. The full amount of credit attributable to the taxpayer
prior to the election;
3. The name, address, and taxpayer identification
number of each credit claimant, and the location and EPA
e-GGRT ID number(s) (if available) of each secure
geological storage facility where the qualified carbon
oxide is disposed of or injected;
4. The dollar amount of credits the taxpayer is allowing
each credit claimant to claim and the corresponding
metric tons of qualified carbon oxide; and
5. The dollar amount of credits retained by the electing
taxpayer and the corresponding metric tons of qualified
carbon oxide.
Information required to be provided by credit claimant. The credit claimant must include the following
information on Form 8933 with its timely filed federal
income tax return or Form 1065 (including extensions).
• The name, address, and taxpayer identification number
of the credit claimant;
• The name, address, and taxpayer identification number
of each taxpayer making an election under section 45Q(f)
(3)(B) to allow the credit to the credit claimant;
• The location and EPA e-GGRT ID number(s) (if
available) of each facility where carbon oxide was
captured;
• The location and EPA e-GGRT ID number(s) (if
available) of each secure geological storage facility where
the qualified carbon oxide is disposed of or injected;
• The full dollar amount of credits attributable to each
electing taxpayer prior to the election and the
corresponding metric tons of carbon oxide;
• The dollar amount of credits that each electing taxpayer
is allowing the credit claimant to claim and the
corresponding metric tons of carbon oxide; and
• A copy of the electing taxpayer’s Schedule E (Form
8933).
Section 45Q(f)(9) Election
For purposes of section 45Q(a)(3) and (4), a person
described in section 45Q(f)(3)(A)(ii) may elect, at such
time and in such manner as the Secretary may prescribe,
to have the 12-year period begin on the first day of the first
tax year in which a credit under this section is claimed for
equipment that’s originally placed in service at a facility on
or after February 9, 2018, if:
• No one claimed a credit under this section for such
equipment for any prior tax year;
• The facility at which such equipment is placed in
service is located in an area affected by a federally
declared disaster (as defined by section 165(i)(5)(A)) after
the equipment is originally placed in service; and
• Such federally declared disaster results in a cessation
of the operation of the facility or the equipment after such
equipment is originally placed in service.
Application of Section 45Q for Certain
Carbon Capture Equipment
In the case of any equipment placed in service before
February 9, 2018, the credit will apply to qualified carbon
oxide captured using such equipment before the end of
the calendar year in which the Secretary, in consultation
with the Administrator of the EPA, certifies that, during the
6
period beginning after October 3, 2008, a total of
75,000,000 metric tons of qualified carbon oxide have
been taken into account in accordance with section
45Q(a), as in effect on the day before February 9, 2018,
and section 45Q(a)(1) and (2).
Effective August 16, 2022, in the case of any
equipment placed in service before February 9, 2018, the
credit will apply to qualified carbon oxide captured using
such equipment before the earlier of January 1, 2023, and
the end of the calendar year in which the Secretary, in
consultation with the Administrator of the EPA, certifies
that during the period beginning after October 3, 2008, a
total of 75,000,000 metric tons of qualified carbon oxide
have been taken into account in accordance with section
45Q(a), as in effect on the day before February 9, 2018,
and section 45Q(a)(1) and (2). See section 45Q(g) as
amended by IRA 2022 and Notice 2022-38.
When Construction Begins
Two methods can be used to establish that construction of
a facility or equipment has begun.
1. Physical Work Test is satisfied when physical work
of a significant nature begins and other requirements
provided in Section 5 of Notice 2020-12, 2020-11 I.R.B.
495, available at IRS.gov/irb/2020-11_IRB#NOT-2020-12,
are met.
2. Five Percent Safe Harbor is satisfied when you
pay or incur (within the meaning of Regulations section
1.461-1(a)(1) and (2)) 5% or more of the total cost of a
facility or equipment and meets other requirements
provided in Notice 2020-12, Section 6.
Although both methods can be used, only one method
is needed to establish that construction of a facility or
equipment has begun. If you began construction on a
facility or equipment by satisfying either the Physical Work
Test or the Five Percent Safe Harbor, or both, before the
effective date of Notice 2020-12 (March 9, 2020), you may
use March 9, 2020, as the date that construction began on
such facility or equipment. Additionally, if you began
construction on a facility or equipment before March 9,
2020, under both the Physical Work Test and the Five
Percent Safe Harbor, you may choose either method (but
not both) for the purpose of applying the beginning of
construction rules. If you began construction on a facility
or equipment on or after March 9, 2020, construction will
be deemed to have begun on the date you first satisfy
either the Physical Work Test or the Five Percent Safe
Harbor. If you fail to satisfy the Five Percent Safe Harbor in
1 year due to cost overruns (as defined in Section 6.03 of
Notice 2020-12), you won’t be prevented from using the
Physical Work Test in a later year to establish beginning of
construction, provided that occurs before January 1, 2033.
Increased Credit Amount for Facilities
and Equipment
Notice 2022-61 explains how claimants, including
taxpayers, tax-exempt and government entities, and
non-taxable pass-through entities, receive increased
credit amounts for any facility or equipment placed in
service after 2022, by satisfying certain requirements. In
the case of any facility or equipment installed in any
facility, the amount of the credit rates as adjusted for
Instructions for Form 8933 (Rev. 12-2025)
inflation or applicable dollar amounts are multiplied by 5 if
any one of the following requirements are met.
• A facility the construction of which began prior to
January 29, 2023;
• Carbon equipment the construction of which began
prior to January 29, 2023, and installed in a facility; or
• A facility or equipment that satisfies the prevailing wage
and apprenticeship requirements.
See Notice 2022-61, 2022-52 I.R.B. 560, available at
IRS.gov/irb/2022-52_IRB#NOT-2022-61.
Additional information for claiming the increased
credit amount. If you answered “Yes” on Part I, line 33,
and claimed an increased credit amount on Part III, line 1i,
2i, or 3k, you must attach a statement to Form 8933 that
includes the following information.
1. Your name and taxpayer identification number and
the facility or equipment description and IRS-issued
registration number (if applicable) from Part I.
2. If construction began before January 29, 2023, as
shown on Part I, line 5, a statement that you met the
Continuity Requirement under the Physical Work Test or
the Five Percent Safe Harbor to establish the beginning of
construction (alteration or repairs).
3. If construction began on or after January 29, 2023,
you must also file Form 7220, Prevailing Wage and
Apprenticeship (PWA) Verification and Corrections, to
substantiate that you meet the PWA requirements. File a
separate Form 7220 for each qualified facility you are
claiming the increased credit amount.
4. A declaration, applicable to the statement and any
accompanying documents, signed by you, or signed by a
person currently authorized to bind you in such matters, in
the following form: “Under penalties of perjury, I declare
that I have examined this statement, including
accompanying documents, and to the best of my
knowledge and belief, the facts presented in support of
this statement are true, correct, and complete.”
Prevailing Wage Requirements
For any facility and any equipment placed in service at
such facility, you must ensure that any laborers and
mechanics employed by you or any contractor or
subcontractor in (i) the construction of such facility or
equipment, and (ii) for any tax year, for any portion of such
tax year that’s within the period described in section
45Q(a)(3)(A) or (4)(A), the alteration or repair of such
facility or such equipment, must be paid wages at rates
not less than the prevailing rates for construction,
alteration, or repair of a similar character in the locality in
which such facility and equipment are located as most
recently determined by the Secretary of Labor, in
accordance with subchapter IV of chapter 31 of title 40,
United States Code. See Notice 2022-61 for details.
For information on how to correct a failure to satisfy the
prevailing wage requirements, and the penalty related to
the failure, see section 45(b)(7)(B); Notice 2022-61; T.D.
9998, available at IRS.gov/irb/2024-34_IRB#TD-9998,
and the Instructions for Form 4255, Certain Credit
Recapture, Excessive Payments, and Penalties.
Instructions for Form 8933 (Rev. 12-2025)
Apprenticeship Requirements
To meet the apprenticeship requirements, you must
ensure that, for the construction of any qualified facility,
not less than the applicable percentage of the total labor
hours of the construction, alteration, or repair work
(including such work performed by any contractor or
subcontractor) for such facility is, subject to section 45(b)
(8)(B), performed by qualified apprentices (apprenticeship
labor hour-requirements). The apprenticeship
requirements include three components: a labor-hours
requirement, a ratio requirement, and a participation
requirement.
• You must ensure that 15% of the total labor hours
performed in the construction, alteration, or repair of the
facility are performed by qualified apprentices from a
registered apprenticeship program.
• You must ensure that the applicable ratio of apprentices
to journeyworkers established by the registered
apprenticeship program are met for apprentices working
on the facility each day.
• Any taxpayer (or contractor or subcontractor) that
employs four or more laborers or mechanics in the
construction, alteration, or repair of the facility must also
hire at least one qualified apprentice.
For more information on the prevailing wage and
apprenticeship requirements, including applicable
exceptions, see IRS.gov/PWAFAQ .
For information on the penalty related to the failure to
satisfy the apprenticeship requirements, see section 45(b)
(8)(D) and the Instructions for Form 4255.
Beginning of construction. See Sections 2 and 5 of
Notice 2022-61 and When Construction Begins, earlier, to
establish whether construction of a facility or equipment at
a facility began before January 29, 2023.
Recapture
A recapture event occurs when qualified carbon oxide for
which a credit has been claimed ceases to be captured,
disposed of, or used as a tertiary injectant during the
recapture period. Recapture events are determined
separately for each project involving capture, disposal, or
use of qualified carbon oxide as a tertiary injectant.
Qualified carbon oxide ceases to be captured,
disposed of, or used as a tertiary injectant if the leaked
amount of qualified carbon oxide in the tax year exceeds
the amount of qualified carbon oxide disposed of in
secure geological storage or used as a tertiary injectant in
that same tax year.
If a recapture event occurs during a project’s recapture
period and you have claimed a credit for that project, you
must report the following information on Schedule D (Form
8933), Recapture Certification, filed with your federal
income tax return or Form 1065 for the tax year for which
the recapture event occurred.
• The recapture amount (as defined in Regulations
section 1.45Q-5(e));
• The quantity of leaked qualified carbon oxide (in metric
tons) (as defined in Regulations section 1.45Q-5(c));
• The statutory credit rate at which the credits were
originally calculated; and
• A statement that describes how you became aware of
the recapture event, how the leaked amount was
7
determined, and the identity and involvement of any
regulatory agencies.
Credit Reduced for Tax-Exempt Bond
Financing
For facilities or equipment placed in service after 2022,
the credit is reduced by an amount that is the product of
the credit amount otherwise determined for the tax year
and the lesser of 15% or a fraction determined for the tax
year. The numerator of the fraction is the sum, for the tax
year and all prior tax years, of the proceeds of an issue of
any obligations the interest on which is exempt from tax
under section 103 and that is used to provide financing for
the facility as of the close of the tax year. The denominator
of the fraction is the aggregate amount of additions to the
capital account for the facility for the tax year and all prior
tax years as of the close of the tax year.
Coordination With Section 142 Bond
Financing
For facilities or equipment placed in service before 2023
and obligations issued after 2021, the credit for any
project for any tax year is reduced by the amount that’s the
product of the credit for such tax year and the lesser of
50% or a fraction, the numerator of which is the sum, for
the tax year and all prior tax years, of the proceeds from
an issue described in section 142(a)(17) used to provide
financing for the project the interest on which is exempt
from tax under section 103, and the denominator of which
is the aggregate amount of additions to the capital
account for the project for the tax year and all prior tax
years. The amounts under the preceding sentence for any
tax year are determined as of the close of the tax year.
Note: For purposes of the above, there are no prior tax
years before January 1, 2022.
Reporting Requirements
General Requirements
If you’re claiming the credit, you must provide the name
and location of the facilities at which the qualified carbon
oxide was captured.
Caution: If you’re claiming the credit on an amended
federal income tax return, an amended Form 1065, or an
AAR, as applicable, you must state “AMENDED RETURN
FOR SECTION 45Q CREDIT” at the top of your amended
federal income tax return, amended Form 1065, or AAR,
as applicable. Your amended federal income tax return or
the amended Form 1065 must be filed, in no event, later
than the applicable period of limitations on assessment for
the tax year for which your amended federal income tax
return or Form 1065 is being filed.
Contractually Ensuring Disposal, Injection, or
Utilization of Qualified Carbon Oxide
If you enter into a contract with another party to ensure
disposal, injection, or utilization of qualified carbon oxide,
you must report the existence of each contract, and the
parties involved annually on Form 8933 by each party to
the contract, regardless of the party claiming the credit. In
addition to any information stated as required on Form
8
8933 and the applicable Schedules A through F (Form
8933), the report must include the following information.
• Your name and identifying number;
• The name and taxpayer identification number of each
party with whom you have entered into a contract to
ensure the disposal, injection, or utilization of qualified
carbon oxide;
• The date on which each contract was executed;
• The number of metric tons of qualified carbon oxide
each contracting party disposes of, injects, or utilizes on
behalf of you each tax year for reporting to the IRS; and
• For contracts for the disposal of qualified carbon oxide
in secure geological storage or the use of qualified carbon
oxide as a tertiary injectant in EOR or natural gas
recovery, identifying information (the name of the operator,
field, unit, and reservoir), location by county and state,
and EPA e-GGRT ID number(s) (if available) for
submission of the facility’s 40 CFR Part 98 (subpart RR)
annual reports.
Secure Geological Storage
Certifications must be made annually.
Reporting Based on 40 CFR Part 98 (Subpart RR)
For an EOR or natural gas recovery project in which you
reported volumes to the EPA pursuant to 40 CFR Part 98
subpart RR, you may self-certify the volume of carbon
oxide claimed for purposes of the credit.
Reporting Based on CSA/ANSI ISO 27916:19
For an EOR or natural gas recovery project in which you
determined volumes pursuant to CSA/ANSI ISO
27916:19, you may prepare documentation as outlined in
CSA/ANSI ISO 27916:19 internally, but such
documentation must be provided to a qualified
independent engineer or geologist, who then must certify
that the documentation provided, including the mass
balance calculations as well as information regarding
monitoring and containment assurance, is accurate and
complete. For any leaked amount of qualified carbon
oxide that’s determined pursuant to CSA/ANSI ISO
27916:19, the certification must also include a statement
that the quantity was determined in accordance with
sound engineering principles.
If you capture qualified carbon oxide to get the credit,
you must file Form 8933 with your timely filed federal
income tax return or Form 1065, including extensions, or
for the purpose of this rule, your amendments to federal
income tax returns, Forms 1065, or on AARs, as
applicable. Similarly, if you dispose of, inject, or utilize
qualified carbon oxide, you must also file Form 8933 with
your timely filed federal income tax return or Form 1065,
including extensions, or for the purpose of this rule, your
amendments to federal income tax returns, Forms 1065,
or on AARs, as applicable. If the volume of carbon oxide
certified and reported is a negative amount, see
Regulations section 1.45Q-5 for rules regarding recapture.
Caution: No credit is allowed for any tax year for which
you (including credit claimants) have failed to timely
submit complete documentation, including the required
Instructions for Form 8933 (Rev. 12-2025)
certifications. The credit will be allowed only for a tax year
for which complete documentation and certification have
been timely submitted. Certifications for each tax year
must be submitted by the due date of your federal income
tax return or Form 1065 on which the credit is claimed,
including extensions. If your credit is claimed on your
amended federal income tax return, amended Form 1065,
or AAR, as applicable, certifications may also be
submitted with your amended federal income tax return,
amended Form 1065, or AAR. If a credit was claimed on
your timely filed federal income tax return or Form 1065 for
a tax year ending after February 9, 2018, and beginning
on or before January 13, 2021, for which certifications
weren’t submitted, such certifications may be submitted
with your amended federal income tax return, amended
Form 1065, or AAR, as applicable, for the tax year in
which the credit was claimed.
Qualified EOR or Natural Gas Recovery Project
Each qualified EOR or natural gas recovery project must
be certified under Regulations section 1.43-3.
For purposes of a natural gas project, a petroleum
engineer’s certification as required under Regulations
section 1.43-3(a)(3) and an operator’s continued
certification of a project as required under Regulations
section 1.43-3(b)(3) must include an additional statement
that the certification is for purposes of the credit.
Petroleum Engineer’s Certification
The petroleum engineer’s certification must be attached to
Form 8933 and filed no later than the last date prescribed
by law (including extensions) for filing the operator’s or
designated owner’s federal income tax return or Form
1065 for the first tax year in which qualified carbon oxide is
injected into the reservoir.
Caution: If a credit is claimed on an amended federal
income tax return, an amended Form 1065, or an AAR, as
applicable, the petroleum engineer’s certification will be
treated as filed timely if it’s attached to a Form 8933 that’s
submitted with such amended federal income tax return,
amended Form 1065, or AAR. For a credit that’s claimed
on a timely filed federal income tax return or Form 1065 for
a tax year ending after February 9, 2018, and beginning
on or before January 13, 2021, for which the petroleum
engineer’s certification wasn’t submitted, the petroleum
engineer’s certification will be treated as filed timely if it’s
attached to an amended Form 8933 for any tax year
ending after February 9, 2018, but not for tax years
beginning on or before January 13, 2021.
Operator’s Continued Certification
The operator’s continued certification of a project must be
attached to a Form 8933 and filed no later than the last
date prescribed by law (including extensions) for filing the
operator’s or designated owner’s federal income tax return
or Form 1065 for tax years after the tax year for which the
petroleum engineer’s certification is filed but not after the
tax year in which injection activity ceases and all injection
wells are plugged and abandoned.
Instructions for Form 8933 (Rev. 12-2025)
Utilization
The amount of qualified carbon oxide utilized by you is
equal to the metric tons of qualified carbon oxide that you
demonstrate, based upon the LCA, that were captured
and permanently isolated from the atmosphere (isolated),
or displaced from being emitted into the atmosphere
(displaced).
Lifecycle greenhouse gas emissions and lifecycle
analysis. The term “lifecycle greenhouse gas emissions”
means the aggregate quantity of greenhouse gas
emissions (including direct emissions and significant
indirect emissions such as significant emissions from land
use changes) related to the full product lifecycle, including
all stages of product and feedstock production and
distribution, from feedstock generation or extraction
through the distribution and delivery and use of the
finished product to the ultimate consumer, where the
mass values for all greenhouse gases are adjusted to
account for their relative global warming potential
according to Table A-1 of 40 CFR Part 98 subpart A. The
amount of lifecycle greenhouse gas emissions measured
by an LCA is expressed in carbon dioxide equivalents
(CO2-e).
Measurement. The measurement and written LCA report
must be performed by or verified by an independent third
party. The LCA report must be prepared in conformance
with, and contain documentation that conforms to, the
International Organization for Standardization (ISO)
14040:2006, Environmental Management—Life Cycle
Assessment—Principles and Framework, and ISO
14044:2006, Environmental Management—Life Cycle
Assessment—Requirements and Guidelines, as well as a
statement documenting the qualifications of the
independent third party, including proof of appropriate
U.S. or foreign professional license, and an affidavit from
the third party stating that it’s independent from you.
Approval of the LCA. You must submit the written LCA
report and independent third-party statement to the IRS
and the Department of Energy (DOE). The LCA will be
subject to a technical review by the DOE, and the IRS will
determine whether to approve the LCA.
You should fax a copy of your LCA report, including the
independent third-party statement specified in
Regulations section 1.45Q-4(c)(4), to the IRS at
844-255-4817. The submission should include a cover
letter with:
1. Name and location of the facility where the qualified
carbon oxide is utilized (“utilization facility”);
2. Name of the taxpayer(s) claiming the credit based
on the LCA, including each taxpayer’s TIN/EIN;
3. Name of the operator of the utilization facility,
including the operator’s TIN/EIN;
4. Tax year for which the LCA report is being
submitted;
5. Name, relationship to the taxpayer, mailing address,
email address, and phone number of a person whom the
IRS can contact regarding the LCA report. If this person is
not an employee of the taxpayer, attach Form 2848, Power
of Attorney and Declaration of Representative, to the LCA
report;
9
6. An attestation that the applicable requirements of
section 45Q, Regulations sections 1.45Q-1, 1.45Q-2, and
1.45Q-4 are satisfied. Such attestation must include
confirmation of the following.
a. The carbon oxide for which the section 45Q
utilization credit is being claimed is qualified carbon oxide
within the meaning of section 45Q(c);
b. The qualified carbon oxide for which the section
45Q utilization credit is being claimed is captured by a
qualified facility within the meaning of section 45Q(d);
c. The qualified carbon oxide for which the section
45Q utilization credit is being claimed was captured in the
United States (within the meaning of section 638(1), or a
U.S. territory set forth in section 638(2));
d. In the case of a resubmission of an LCA approval
request under Section 6.02 of Notice 2024-60, that there
has been no material change since the prior LCA was
approved; and
7. A declaration, applicable to the LCA approval
request (including the LCA and the cover page information
required by Section 3.04 of Notice 2024-60), signed by
you, or signed by a person currently authorized to bind
you in these matters, in the following form: “Under
penalties of perjury, I declare that I have examined the
information contained in this affirmative statement and the
documents that substantiate this affirmative statement,
and to the best of my knowledge and belief, it is true,
correct, and complete.”
You should also send the DOE an email at
LCA45Q@hq.doe.gov, and the DOE will respond with
instructions for submitting the LCA application to the DOE.
See Notice 2024-60, 2024-34 I.R.B. 515, available at
IRS.gov/irb/2024-34_IRB#NOT-2024-60 for details.
Caution: You must receive approval of your LCA prior to
claiming the section 45Q utilization credit on any federal
income tax return.
Requirements for reapproval of an approved LCA.
You may treat an approved LCA as approved for the tax
year for which the LCA report was submitted and the
following 2 tax years (3-year approval period). You must
submit a new LCA approval request to the IRS and the
DOE after 3 years. See Notice 2024-60.
Specific Instructions
To claim the credit for disposal of carbon oxide in secure
geological storage or for use of carbon oxide as a tertiary
injectant in an EOR or natural gas recovery project, prior
to disposal in secure geological sequestration, the amount
of carbon oxide must be measured at the source of
capture and verified either at the point of disposal in
secure geological storage or at the point of injection as a
tertiary injectant in an EOR or natural gas recovery
project. The amount of qualified carbon oxide is presumed
to be the lesser of the amount measured at capture and
the amount verified at disposal or injection unless it can
be established to the satisfaction of the IRS that the
greater amount is the correct amount.
To claim the credit for utilization of carbon oxide, the
amount of qualified carbon oxide utilized by you is equal to
10
the metric tons of qualified carbon oxide that you
demonstrate, based upon the LCA, were (1) captured and
permanently isolated from the atmosphere, or (2)
displaced from being emitted into the atmosphere. The
amount of qualified carbon oxide utilized by you for
purposes of the credit can’t exceed the amount of
qualified carbon oxide measured at the source of capture.
Part I. Information About Facility,
Carbon Capture Equipment, DAC
Facility, Carbon Oxide Sequestration
Types, Credit Calculation, and Your
Elections
If you’re claiming the credit for a facility or equipment in
Part III, you must complete Part I.
Section 1—Facility Information
Line 1. If making an EPE or transfer election, enter your
pre-filing registration number for the facility that you
received from the IRS.
Line 3. Enter the applicable alpha code for the type of
facility or equipment that captured carbon oxide, disposed
of carbon oxide, or used carbon oxide as a tertiary
injectant.
• GEO for disposal in geological storage,
• EOR for enhanced oil or natural gas recovery projects,
and/or
• UTZ for utilization.
A single facility can take more than one carbon oxide
sequestration path. In this case, you will enter more than
one code on line 3. If you own multiple facilities that took
different carbon oxide sequestration paths, you must
complete a separate Form 8933 for each facility.
Line 4a. If different than filer, enter the owner’s name and
TIN.
Lines 4b and 4c. Enter the address of the facility. If the
facility doesn’t have an address, enter the coordinates of
the facility or property (longitude and latitude).
Line 5. Enter the date construction began. See Beginning
of construction, earlier, for more information.
Section 2—Industrial Facility Information
You must also provide information about the specific
industrial facility and equipment in Section 2.
Section 3—Carbon Capture Equipment and DAC
Facility Information
You must also provide information about specific
equipment and the DAC facility in Section 3.
Section 4—Information About Carbon Oxide
Sequestration Credit and Your Elections
Line 28a. If you answered “Yes” to line 28, determine the
credit (1) using $28.43 on Part III, line 1g, for qualified
carbon oxide captured, disposed of in secure geological
storage, and not used as a tertiary injectant in a qualified
enhanced oil or natural gas recovery project, nor utilized
as described in section 45Q(f)(5); and (2) using $14.21 on
Instructions for Form 8933 (Rev. 12-2025)
Part III, line 2g or 3i for qualified carbon oxide captured,
disposed of in secure geological storage, used as a
tertiary injectant in a qualified enhanced oil or natural gas
recovery project, or utilized as described in section 45Q(f)
(5). See 2025 inflation adjusted credit rates and applicable
dollar amounts, earlier.
Line 28b. If you answered “No” to line 28 and your
carbon capture facility and equipment were placed in
service before 2023, determine the credit (1) using $46.96
on Part III, line 1g, for qualified carbon oxide captured,
disposed of in secure geological storage, and not used as
a tertiary injectant in a qualified enhanced oil or natural
gas recovery project, nor utilized as described in section
45Q(f)(5); and (2) using $32.54 on Part III, line 2g or 3i for
qualified carbon oxide captured, disposed of in secure
geological storage, used as a tertiary injectant in a
qualified enhanced oil or natural gas recovery project, or
utilized as described in section 45Q(f)(5). See 2025
inflation adjusted credit rates and applicable dollar
amounts, earlier.
Line 28c. If you answered “No” to line 28 and your
carbon capture facility and equipment were placed in
service after 2023, and before July 5, 2025, determine the
credit (1) using $17 on Part III, line 1g, for qualified carbon
oxide captured, disposed of in secure geological storage,
and not used as a tertiary injectant in a qualified enhanced
oil or natural gas recovery project, nor utilized as
described in section 45Q(f)(5); and (2) using $12 on Part
III, line 2g or 3i for qualified carbon oxide captured,
disposed of in secure geological storage, used as a
tertiary injectant in a qualified enhanced oil or natural gas
recovery project, or utilized as described in section 45Q(f)
(5).
If you answered “No” to line 28 and your carbon capture
facility and equipment were placed in service after July 4,
2025, determine the credit using $17 on Part III, line 1g;
and Part III, line 2g or 3i.
For a DAC facility, determine the credit (1) using $36 on
Part III, line 1g, for qualified carbon oxide captured,
disposed of in secure geological storage, and not used as
a tertiary injectant in a qualified enhanced oil or natural
gas recovery project, nor utilized as described in section
45Q(f)(5); and (2) using $26 on Part III, line 2g or 3i for
qualified carbon oxide captured, disposed of in secure
geological storage, used as a tertiary injectant in a
qualified enhanced oil or natural gas recovery project, or
utilized as described in section 45Q(f)(2).
See 2025 inflation adjusted credit rates and applicable
dollar amounts, earlier.
Part II. Information About You
Line 1. See Lifecycle greenhouse gas emissions and
lifecycle analysis, earlier.
Line 2. See Qualified carbon oxide, earlier.
Lines 4 and 5. See Section 45Q(f)(3)(B) Election, earlier.
Line 6. See Section 45Q(b)(3) Election, earlier.
Line 7. See Section 45Q(f)(6) Election, earlier.
Line 8. See Section 45Q(f)(9) Election, earlier.
Instructions for Form 8933 (Rev. 12-2025)
Part III. Credit Calculations
Line 1
Qualified carbon oxide captured using carbon capture
equipment or DAC facility, disposed of in secure
geological storage, and not used as a tertiary injectant in a
qualified enhanced oil or natural gas recovery project, nor
utilized as described in section 45Q(f)(5).
Line 1e. Enter the number of metric tons captured and
securely stored (physically disposed of) by another person
and for which you allow that person to claim the resulting
carbon oxide sequestration credit. See Section 45Q(f)(3)
(B) Election, earlier, and instructions for attaching
Schedule E (Form 8933) for each disposal site.
Line 1g. Enter the applicable inflation adjusted credit rate
or applicable dollar amount. See 2025 inflation adjusted
credit rates and applicable dollar amounts, earlier.
Line 1i. See Increased Credit Amount for Facilities and
Equipment, earlier.
Line 2
Qualified carbon oxide captured using carbon capture
equipment or DAC facility, used as a tertiary injectant in a
qualified enhanced oil or natural gas recovery project, and
disposed of in secure geological storage.
Line 2e. Enter the number of metric tons captured and
injected by another person and for which you allow that
person to claim the resulting carbon oxide sequestration
credit. See Section 45Q(f)(3)(B) Election, earlier, and
instructions for attaching Schedule E (Form 8933) for each
recovery project.
Line 2g. Enter the applicable inflation adjusted credit rate
or applicable dollar amount. See 2025 inflation adjusted
credit rates and applicable dollar amounts, earlier.
Line 2i. See Increased Credit Amount for Facilities and
Equipment, earlier.
Line 3
Qualified carbon oxide captured using carbon capture
equipment or DAC facility, and utilized as described in
section 45Q(f)(5).
Line 3e. Enter the number of metric tons captured and
physically utilized by another person and for which you
allow that person to claim the resulting carbon oxide
sequestration credit (expressed as carbon dioxide
equivalents that were determined pursuant to an approved
LCA). See Section 45Q(f)(3)(B) Election, earlier, and
instructions for attaching Schedule E (Form 8933) for each
utilization facility.
Line 3g. The displacement factor (DF) is limited to the
range between zero (0.00) and one (1.00) rounded to the
nearest one hundredth.
Line 3i. Enter the applicable inflation adjusted credit rate
or applicable dollar amount. See 2025 inflation adjusted
credit rates and applicable dollar amounts, earlier.
Line 3j. Multiply the DF adjusted number of metric tons of
captured and utilized carbon oxide by the applicable
inflation adjusted credit rate or applicable dollar amount.
11
Line 3k. See Increased Credit Amount for Facilities and
Equipment, earlier.
Lines 5a–5d
The amounts for any tax year will be determined as of the
close of the tax year. The credit reduced for tax-exempt
bonds, as described earlier, reflects IRA 2022
amendments applicable to facilities, whose construction
began after August 16, 2022.
Line 7e
Subtract line 7d from the total credit reported to you on
Schedule E (Form 8933), Part II, line 6; enter the amount
on line 7e.
Attach Schedule A (Form 8933), Schedule E (Form
8933), and Schedule F (Form 8933).
TIP: Complete Schedule E (Form 8933) if you elect under
section 45Q(f)(3)(B) to allow another person to claim your
credit. See Schedule E, Election Certification, later.
Line 8
On a separate Form 8933 enter your distributive share of
the carbon oxide sequestration credit from partnerships, S
corporations, estates, and trusts, from:
• Schedule K-1 (Form 1065), Partner’s Share of Income,
Deductions, Credits, etc., box 15 (code AW); and
• Schedule K-1 (Form 1120-S), Shareholder’s Share of
Income, Deductions, Credits, etc., box 13 (code AW).
Enter this amount on line 8.
If your only carbon oxide sequestration credit is a credit
which was allocated to you, do not report the credit on
Form 8933. Instead, report the credit directly on Form
3800, Part III, line 1x. But see the Caution next.
Caution: If you receive a Schedule K-1 (Form 1065),
box 15, code BC, or a Schedule K-1 (Form 1120–S),
box 13, code BC, see Transferees of Eligible Credits
Under Section 6418 in the Instructions for Form 3800.
Line 9
If you’re a partnership or an S corporation electing
payment or transfer for the credit for a facility or
equipment, you must report the total credit amount for
your facility or equipment on Form 3800, Part III, line 1x.
Don’t report the total credit amount on Schedule K.
Line 10
Enter the credit recaptured. Attach Schedule D (Form
8933) to Form 8933. Report the credit recapture amount in
Form 4255, Part I, line 2a, column (h).
Instructions for Schedules A
Through F (Form 8933)
Per the TD and the NPRM that preceded it, if you’re a
large section 45Q project filer, you’ll likely have to use
multiple legal contracts with multiple parties for the
capture, utilization, or disposal of carbon oxides and,
generally to claim the credit, the existence of each
contract and the parties involved must be reported on
Form 8933 annually. For this reporting, filers should also
use the applicable Schedules A, B, C, D, E, and F.
12
If you need to list additional owner(s) or lessee(s) of the
geological disposal site, the EOR project, or the utilization
facility; or suppliers of qualified carbon oxide, prepare a
separate schedule with all the owner or supplier
information and attach it to the applicable Schedule B, C,
D, or F. See Supplier, earlier.
Schedule A. Disposal or Enhanced Oil Recovery
Owner Certification
Use Schedule A (Form 8933) if you’re the owner (or one of
the owners) of the geological disposal site or the EOR
project at which captured qualified carbon oxide was
injected during the year. The operator of the disposal site
prepares Schedule B (Form 8933). The operator of the
EOR project prepares Schedule C (Form 8933). Report
the amounts from either Schedule B (Form 8933), line 10;
or Schedule C (Form 8933), line 20, on the applicable
lines of Schedule A (Form 8933).
Schedule B. Disposal Operator Certification
Use Schedule B (Form 8933) if you’re the operator (or
designated operator) of a geological disposal site at which
captured qualified carbon oxide was injected during the
year. Don’t use this schedule if carbon oxide was injected
for enhanced oil or natural gas recovery. Provide a copy of
your Schedule B (Form 8933) to each owner of the
disposal site project.
Owner is a partnership, an S corporation, or a joint
venture that has elected out of subchapter K of the
Code. If one or more of the owners is a partnership or an
S corporation, provide information about the pass-through
entity, not about the partners or shareholders.
If one or more of the owners is part of a joint venture
that has elected out of subchapter K of the Code, provide
information about all such owners.
Schedule C. Enhanced Oil Recovery Operator
Certification
Use Schedule C (Form 8933) if you’re the operator (or
designated operator) of an enhanced oil or gas recovery
project (EOR project) at which captured qualified carbon
oxide was injected during the year. Provide a copy of your
Schedule C (Form 8933) to each owner of the EOR
project.
If one or more of the owners is a partnership, an S
corporation, or part of a joint venture that has elected out
of subchapter K of the Code, see Owner is a partnership,
an S corporation, or a joint venture that has elected out of
subchapter K of the Code, earlier.
Schedule D. Recapture Certification
Use Schedule D (Form 8933) if you’re the operator or
owner of the geological disposal site or EOR project to
report a recapture event. After you figured the recapture
amount using Schedule D (Form 8933), enter the amount
on Form 8933, Part III, line 10; and in Form 4255, Part I,
line 2a, column (h). Complete Form 4255, Certain Credit
Recapture, Excessive Payments, and Penalties, to
determine the amount from Form 4255 that will be
reported on your tax return. See the Instructions for Form
4255 for details.
Instructions for Form 8933 (Rev. 12-2025)
Part I. Line 4a. Enter the EOR project operator’s name.
See Regulations section 1.45Q-2(h).
Part II. Line 11. Use two columns for any owner that
stored both qualified and nonqualified carbon oxide. If
more columns are needed, attach a separate schedule
that shows the allocation for all owners. You should
allocate the amount of stored carbon oxide on a pro rata
basis, using figures from Schedule C (Form 8933), line 20,
of each year, unless there is a sound engineering basis to
do otherwise.
Part III
Part Ill is prepared by each owner of the disposal site or
EOR project during the current and 3 previous tax years. It
is used to determine the amount of the qualified carbon
oxide sequestration credit that needs to be recaptured.
Section 2. A separate Part Ill, Section 2, should be
completed for each supplier of qualified carbon oxide
during the current and 3 previous tax years and a copy
should be given to each supplier.
One supplier and multiple facilities. If one supplier
supplied qualified carbon oxide from multiple facilities,
complete a Part III, line 8, for each facility.
Schedule E, Election Certification
Use Schedule E (Form 8933) if (1) you’re the owner of the
capture facility that supplied qualified carbon oxide to
another person that was properly disposed of in
geological storage, used in an EOR project, or utilized in a
manner consistent with section 45Q(f); and (2) you elect
under section 45Q(f)(3)(B) to allow the credit to that
person. You must make a separate election for each
facility.
Part I. Line 5. Enter placed-in-service date of carbon
capture equipment. The original placed-in-service date of
a single process train of carbon capture equipment at an
industrial facility that includes the existing acid gas
removal unit and new components of carbon capture
equipment is the date that the single process train is
placed in a condition or state of readiness and availability
for the capture, processing, and preparation of carbon
oxide for transport for disposal, injection, or utilization.
See Rev. Rul. 2021-13.
Part I. Line 17. Check the applicable credit rate or dollar
amount. See 2025 inflation adjusted credit rates and
applicable dollar amounts, earlier.
Schedule F. Utilization Certification
Use Schedule F (Form 8933) if you’re the owner of the
utilization facility who utilized qualified carbon oxide during
the year. Don’t combine information from separate
utilization facilities on the same schedule. Provide a copy
of your Schedule F (Form 8933) to each supplier that
supplied qualified captured carbon oxide to inform the
suppliers of the amount of their qualified carbon oxide that
was utilized.
If one or more of the owners is a partnership or an S
corporation, see Owner is a partnership, an S corporation,
or a joint venture that has elected out of subchapter K of
the Code, earlier.
Paperwork Reduction Act Notice. We ask for you to obtain the information on this form to carry out the Internal
Revenue laws of the United States. You are required to obtain this information.
You are not required to obtain the information requested on a form that is subject to the Paperwork Reduction Act
unless the form displays a valid OMB control number. Books or records relating to a form or its instructions must be
retained as long as their contents may become material in the administration of any Internal Revenue law. Generally, tax
returns and return information are confidential, as required by Internal Revenue Code section 6103.
The time needed to complete and file this form will vary depending on individual circumstances. The estimated burden
for individual filers is approved under OMB control number 1545-0074; for business filers, it is approved under OMB
control number 1545-0123; and for trust filers, it is approved under OMB control number 1545-0092. For the estimated
averages, see the instructions for your income tax return.
If you have comments concerning the accuracy of these time estimates or suggestions for making this form simpler,
we would be happy to hear from you. See the instructions for the tax return with which this form is filed.
Instructions for Form 8933 (Rev. 12-2025)
13
This is a copy of a public record, reproduced as it was published. It is not legal advice, and it may not be the version a court would rely on. Check the official source before you cite it.