# 67 FR 62590: Defense Federal Acquisition Regulation Supplement; Foreign Acquisition

> Federal · Regulations · In force

URL: https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-24739

## Section

- **Citation:** 67 FR 62590
- **Heading:** Defense Federal Acquisition Regulation Supplement; Foreign Acquisition
- **Jurisdiction:** Federal
- **Kind:** Regulations
- **Status:** In force
- **Text as of:** August 14, 2026
- **Source:** Compiled text
- **Location:** Federal Register / Vol. 67 / 67 FR 62590

## Text

DEPARTMENT OF DEFENSE 48 CFR Parts 206, 208, 209, 225, 242, and 252 [DFARS Case 2002-D009] Defense Federal Acquisition Regulation Supplement; Foreign Acquisition AGENCY:
Department of Defense (DoD).

ACTION:
Proposed rule with request for comments.

SUMMARY:
DoD is proposing to amend the Defense Federal Acquisition Regulation Supplement (DFARS) to simplify and clarify policy pertaining to the acquisition of supplies and services from foreign sources.

DATES:
Comments on the proposed rule should be submitted in writing to the address shown below on or before December 6, 2002, to be considered in the formation of the final rule.

ADDRESSES:
Respondents may submit comments directly on the World Wide Web at http://emissary.acq.osd.mil/dar/dfars.nsf/pubcomm. As an alternative, respondents may e-mail comments to: dfars@acq.osd.mil. Please cite DFARS Case 2002-D009 in the subject line of e-mailed comments.
Respondents that cannot submit comments using either of the above methods may submit comments to: Defense Acquisition Regulations Council, Attn: Ms. Amy Williams, OUSD(AT&L)DP(DAR), IMD 3C132, 3062 Defense Pentagon, Washington, DC 20301-3062; facsimile (703) 602-0350. Please cite DFARS Case 2002-D009.
At the end of the comment period, interested parties may view public comments on the World Wide Web at http://emissary.acq.osd.mil/dar/dfars.nsf.
FOR FURTHER INFORMATION CONTACT:
Ms. Amy Williams, (703) 602-0328.

SUPPLEMENTARY INFORMATION:
A. Background
This rule proposes revisions to DFARS Part 225, Foreign Acquisition, and associated provisions and clauses. The rule—
• Provides streamlined procedures for evaluating foreign offers when acquiring supplies, and adds procedures for evaluating foreign offers in acquisitions in which price is not the determining factor.
• Changes the definition of “qualifying country end product” to permit the qualifying country manufacturing the product to use components from any other qualifying country
and clauses. The rule—
• Provides streamlined procedures for evaluating foreign offers when acquiring supplies, and adds procedures for evaluating foreign offers in acquisitions in which price is not the determining factor.
• Changes the definition of “qualifying country end product” to permit the qualifying country manufacturing the product to use components from any other qualifying country.
• Lowers the required approval levels for determinations of nonavailability under the Buy American Act.
• Lowers the required approval levels for individual public interest determinations for acquisition of end products from qualifying countries.
• Provides that the Government will evaluate duty only if it is to be paid. Except for qualifying country supplies or eligible end products, the contractor will request duty-free entry only on foreign supplies for which the contractor estimates that duty will exceed $200 per unit (end product or component). One duty-free entry clause replaces five existing clauses.
• Makes use of the clause pertaining to Waiver of United Kingdom Levies optional for acquisitions not expected to exceed the simplified acquisition threshold.
• Eliminates the requirement for a contractor to represent that it will comply with all laws, decrees, labor standards, and regulations of the foreign country in which the contract will be performed.
• Moves restrictions on contracting with firms owned or controlled by the government of a terrorist country or other foreign governments from Part 209, Contractor Responsibility, to Part 225, Foreign Acquisition.
• Deletes obsolete text and clauses relating to outdated appropriations act restrictions, resulting in the elimination of four clauses.
• Incorporates the DFARS changes proposed under Case 2002-D008, Trade Agreements Act-Exception for U.S.-Made End Products, published at 67 FR 49278 on July 30, 2002
foreign governments from Part 209, Contractor Responsibility, to Part 225, Foreign Acquisition.
• Deletes obsolete text and clauses relating to outdated appropriations act restrictions, resulting in the elimination of four clauses.
• Incorporates the DFARS changes proposed under Case 2002-D008, Trade Agreements Act-Exception for U.S.-Made End Products, published at 67 FR 49278 on July 30, 2002.
Because of the complexity of the Buy American Act and the trade agreements, DoD is preparing an on-line training module to assist in understanding DFARS Part 225. The goal is to provide sufficient explanatory material and practical examples to clarify the main issues.
This rule was not subject to Office of Management and Budget review under Executive Order 12866, dated September 30, 1993.
B. Regulatory Flexibility Act
The proposed rule is not expected to have a significant economic impact on a substantial number of small entities within the meaning of the Regulatory Flexibility Act, 5 U.S.C. 601, et seq. , because most of the changes in the rule merely simplify and clarify existing policy and procedures. Other changes, such as the revised definition of “qualifying country end product” primarily affect foreign firms, which, by definition, do not qualify as small entities within the meaning of the Regulatory Flexibility Act. The changes in procedures for evaluation of duty will result in a paperwork burden reduction for both large and small businesses, but the economic impact will not be significant. Therefore, DoD has not prepared an initial regulatory flexibility analysis. DoD invites comments from small businesses and other interested parties. DoD also will consider comments from small entities concerning the affected DFARS subparts in accordance with 5 U.S.C. 610. Such comments should be submitted separately and should cite DFARS Case 2002-D009.
C
economic impact will not be significant. Therefore, DoD has not prepared an initial regulatory flexibility analysis. DoD invites comments from small businesses and other interested parties. DoD also will consider comments from small entities concerning the affected DFARS subparts in accordance with 5 U.S.C. 610. Such comments should be submitted separately and should cite DFARS Case 2002-D009.
C. Paperwork Reduction Act
This rule does not impose any new information collection requirements that require the approval of the Office of Management and Budget under 44 U.S.C. 3501, et seq. The information collection requirements in the rule are currently approved by the Office of Management and Budget under Control Numbers 0704-0229 and 0704-0187. Elimination of the provision at 252.225-7003, Information for Duty-Free Entry Evaluation, will result in a reduction of 21,451 hours in estimated annual burden.
List of Subjects in 48 CFR Parts 206, 208, 209, 225, 242, and 252
Government procurement.

Michele P. Peterson, Executive Editor, Defense Acquisition Regulations Council.
Therefore, DoD proposes to amend 48 CFR Parts 206, 208, 209, 225, 242, and 252 as follows:
1. The authority citation for 48 CFR Parts 206, 208, 209, 225, 242, and 252 continues to read as follows:
Authority:
41 U.S.C. 421 and 48 CFR Chapter 1.
PART 206—COMPETITION REQUIREMENTS
2. Section 206.303-1 is amended by adding paragraph (d) to read as follows:
206.303-1 Requirements.
ouncil.
Therefore, DoD proposes to amend 48 CFR Parts 206, 208, 209, 225, 242, and 252 as follows:
1. The authority citation for 48 CFR Parts 206, 208, 209, 225, 242, and 252 continues to read as follows:
Authority:
41 U.S.C. 421 and 48 CFR Chapter 1.
PART 206—COMPETITION REQUIREMENTS
2. Section 206.303-1 is amended by adding paragraph (d) to read as follows:
206.303-1 Requirements.
(d) The Director of Defense Procurement, Office of the Under Secretary of Defense (Acquisition, Technology, and Logistics), is the agency point of contact for submission of justifications to the Office of the United States Trade Representative.

PART 208—REQUIRED SOURCES OF SUPPLIES AND SERVICES
208.7203 [Amended] 3. Section 208.7203 is amended in paragraph (c) by removing “225.7010” and adding in its place “225.7005”.

PART 209—CONTRACTOR QUALIFICATIONS
209.101 [Removed] 4. Section 209.101 is removed.
5. Section 209.104-1 is amended by revising paragraph (g) to read as follows:

209.104-1 General standards.
(g) For restrictions on contract award to certain foreign firms, see subparts 225.7 and 225.70.

209.104-70 [Removed] 6. Section 209.104-70 is removed.

209.405-2 [Removed] 7. Section 209.405-2 is removed.

209.409 [Removed] 8. Section 209.409 is removed.

PART 225—FOREIGN ACQUISITION
9. Sections 225.000, 225.001, and 225.003 are revised to read as follows:
225.000 Scope of part. This part also provides policy and procedures for—
(1) Purchasing foreign defense supplies, services, and construction materials, including special procedures for—
2 [Removed] 7. Section 209.405-2 is removed.

209.409 [Removed] 8. Section 209.409 is removed.

PART 225—FOREIGN ACQUISITION
9. Sections 225.000, 225.001, and 225.003 are revised to read as follows:
225.000 Scope of part. This part also provides policy and procedures for—
(1) Purchasing foreign defense supplies, services, and construction materials, including special procedures for—
(i) Contracting with Canadian and other qualifying country sources; and
(ii) Cooperative projects;
(2) Implementing statutory and policy restrictions on foreign acquisition;
(3) Reporting contract performance outside the United States;
(4) Foreign military sales acquisitions; and
(5) Antiterrorism/force protection for defense contractors outside the United States.

225.001 General. When evaluating offers of foreign end products, consider the following:
(1) Statutory or policy restrictions.
(i) Determine whether the product is restricted by—
(A) Statute (see subpart 225.70); or
(B) DoD policy (see subpart 225.71 and FAR 6.302-3).
(ii) If an exception to or waiver of a restriction in subpart 225.70 or 225.71 would result in award of a foreign end product, apply the policies and procedures of the Buy American Act or the Balance of Payments Program, and, if applicable, the trade agreements.
(2) Memoranda of understanding or other international agreements. Determine whether the offered product is the product of one of the qualifying countries listed in 225.872-1.
(3) Trade agreements. If the product is not an eligible product, a qualifying country end product, or a U.S.-made end product, purchase of the foreign end product may be prohibited (see FAR 25.403(c) and 225.403(c)).
(4) Other trade sanctions and prohibited sources.
ational agreements. Determine whether the offered product is the product of one of the qualifying countries listed in 225.872-1.
(3) Trade agreements. If the product is not an eligible product, a qualifying country end product, or a U.S.-made end product, purchase of the foreign end product may be prohibited (see FAR 25.403(c) and 225.403(c)).
(4) Other trade sanctions and prohibited sources.
(i) Determine whether the offeror complies with the secondary Arab boycott of Israel. Award to such offerors may be prohibited (see 225.670).
(ii) Determine whether the offeror is a prohibited source (see 225.770).
(5) Buy American Act and Balance of Payments Program. See the evaluation procedures in Subpart 225.5.

225.003 Definitions. As used in this part—
(1) Caribbean Basin country end product includes petroleum or any product derived from petroleum.
(2) Defense equipment means any equipment, item of supply, component, or end product purchased by DoD.
(3) Domestic concern means—
(i) A concern incorporated in the United States (including a subsidiary that is incorporated in the United States, even if the parent corporation is a foreign concern); or
(ii) An unincorporated concern having its principal place of business in the United States.
(4) Domestic end product has the meaning given in the clauses at 252.225-7001, Buy American Act and Balance of Payments Program; and 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program, instead of the meaning in FAR 25.003.
(5) Eligible product means, instead of the definition in FAR 25.003, a designated, NAFTA, or Caribbean Basin country end product in the categories listed in 225.401-70.
(6) Foreign concern means any concern other than a domestic concern.
(7) Government of a terrorist country is defined in the provision at 252.225-7017, Disclosure of Ownership or Control by the Government of a Terrorist Country.
) Eligible product means, instead of the definition in FAR 25.003, a designated, NAFTA, or Caribbean Basin country end product in the categories listed in 225.401-70.
(6) Foreign concern means any concern other than a domestic concern.
(7) Government of a terrorist country is defined in the provision at 252.225-7017, Disclosure of Ownership or Control by the Government of a Terrorist Country.
(8) Nonqualifying country means a country other than the United States or a qualifying country.
(9) Nonqualifying country component means a component mined, produced, or manufactured in a nonqualifying country.
(10) Qualifying country means a country with a memorandum of understanding or international agreement with the United States. Qualifying countries are listed in 225.872-1.
(11) Qualifying country component and qualifying country end product are defined in the clauses at 252.225-7001, Buy American Act and Balance of Payments Program; and 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program. Qualifying country end product is also defined in the clause at 252.225-7021, Trade Agreements.
(12) Qualifying country offer means an offer of a qualifying country end product, including the price of transportation to destination.
(13) Source, when restricted by such words as foreign, domestic, or qualifying country, means the actual manufacturer or producer of the end product or component.
(14) Terrorist country is defined in the provision at 252.225-7017, Disclosure of Ownership or Control by the Government of a Terrorist Country.
10. Subpart 225.1 is revised to read as follows:
Subpart 225.1—Buy American Act—Supplies
Sec. 225.101 General. 225.103 Exceptions. 225.104 Nonavailable articles. 225.105 Determining reasonableness of cost. 225.170 Solicitations.
225.101 General. (a) For DoD, the following two-part test determines whether a manufactured end product is a domestic end product:
ernment of a Terrorist Country.
10. Subpart 225.1 is revised to read as follows:
Subpart 225.1—Buy American Act—Supplies
Sec. 225.101 General. 225.103 Exceptions. 225.104 Nonavailable articles. 225.105 Determining reasonableness of cost. 225.170 Solicitations.
225.101 General. (a) For DoD, the following two-part test determines whether a manufactured end product is a domestic end product:
(i) The end product is manufactured in the United States; and
(ii) The cost of its U.S. and qualifying country components exceeds 50 percent of the cost of all its components. This test is applied to end products only and not to individual components.
(c) Additional exceptions that allow the purchase of foreign end products are listed at 225.103.

225.103 Exceptions. (a)(i)(A) Public interest exceptions for certain countries are in 225.872.
(B) For procurements subject to the Trade Agreements Act, the Under Secretary of Defense (Acquisition, Technology, and Logistics) has determined that it is inconsistent with the public interest to apply the Buy American Act to end products that are substantially transformed in the United States.
(ii)(A) Normally, use the evaluation procedures in Subpart 225.5, but
( 1 ) If accepting the low domestic offer will involve substantial foreign expenditures, or accepting the low foreign offer will involve substantial domestic expenditures;
( 2 ) To ensure access to advanced state-of-the-art commercial technology; or
( 3 ) To maintain the same source of supply for spare and replacement parts (also see paragraph (b)(iii)(B) of this section)—
( i ) For an end item that qualifies as a domestic end product; or
( ii ) In order not to impair integration of the military and commercial industrial base.
(B) Except as provided in 225.872-4(b), process a determination for a public interest exception after consideration of the factors in 10 U.S.C
ce of supply for spare and replacement parts (also see paragraph (b)(iii)(B) of this section)—
( i ) For an end item that qualifies as a domestic end product; or
( ii ) In order not to impair integration of the military and commercial industrial base.
(B) Except as provided in 225.872-4(b), process a determination for a public interest exception after consideration of the factors in 10 U.S.C. 2533—
( 1 ) At a level above the contracting officer for acquisitions valued at $100,000 or less;
( 2 ) By the head of the contracting activity for acquisitions valued at more than $100,000 but less than $1,000,000; or
( 3 ) By the agency head for acquisitions valued at $1,000,000 or more.
(b)(i) A determination that an article, material, or supply is not reasonably available is required when domestic offers are insufficient to meet the requirement and award is to be made on other than a qualifying country or eligible end product.
(ii) Except as provided in FAR 25.103(b)(3), the determination shall be approved—
(A) At a level above the contracting officer, if the acquisition is valued at $100,000 or less;
(B) By the chief of the contracting office if the acquisition is valued at more than $100,000 but less than $1,000,000; or
(C) By the head of the contracting activity or immediate deputy if the acquisition is valued at $1,000,000 or more.
(iii) DoD has determined that the following articles are not reasonably available from domestic sources:
(A) End products or components listed in 225.104(a).
(B) Spare or replacement parts that must be acquired from the original foreign manufacturer or supplier.
(C) Foreign drugs acquired by the Defense Supply Center, Philadelphia, when the Director, Pharmaceuticals Group, Directorate of Medical Materiel, determines that only the requested foreign drug will fulfill the requirements.
c sources:
(A) End products or components listed in 225.104(a).
(B) Spare or replacement parts that must be acquired from the original foreign manufacturer or supplier.
(C) Foreign drugs acquired by the Defense Supply Center, Philadelphia, when the Director, Pharmaceuticals Group, Directorate of Medical Materiel, determines that only the requested foreign drug will fulfill the requirements.
(iv) Under coordinated acquisition (see subpart 208.70), the determination is the responsibility of the requiring department when the requiring department specifies acquisition of a foreign end product.
(c) The cost of a domestic end product is unreasonable if it is not the low evaluated offer when evaluated under subpart 225.5.

225.104 Nonavailable articles. (a) DoD has determined that the following articles also are nonavailable in accordance with FAR 25.103(b):
(i) Aluminum clad steel wire.
(ii) Sperm oil.

225.105 Determining reasonableness of cost. (b) Use an evaluation factor of 50 percent instead of the factors specified in FAR 25.105(b).

225.170 Solicitations. For oral solicitations, inform prospective quoters that only domestic and qualifying country end products are acceptable unless—
(1) Other foreign end products are excepted either on a blanket or an individual basis; or
(2) The price of another foreign end product is the low offer under the evaluation procedures in Subpart 225.5.

225.202 [Amended] 11. Section 225.202 is amended in paragraph (a)(2) as follows:
a. In the first sentence, by removing the parenthetical “(iii)”; and
b. In the second sentence, by removing “must” and adding in its place “shall”.
12. Section 225.401 is revised to read as follows:

225.401 Exceptions
foreign end product is the low offer under the evaluation procedures in Subpart 225.5.

225.202 [Amended] 11. Section 225.202 is amended in paragraph (a)(2) as follows:
a. In the first sentence, by removing the parenthetical “(iii)”; and
b. In the second sentence, by removing “must” and adding in its place “shall”.
12. Section 225.401 is revised to read as follows:

225.401 Exceptions. (a)(2) If a department or agency considers an individual acquisition of a product to be indispensable for national security or national defense purposes and appropriate for exclusion from the provisions of FAR Subpart 25.4, it may submit a request with supporting rationale to the Director of Defense Procurement (OUSD (AT&L) DP). Approval by OUSD (AT&L) DP is not required if—
(A) Purchase from foreign sources is restricted by statute (see Subpart 225.70);
(B) Another exception in FAR 25.401 applies to the acquisition; or
(C) Competition from foreign sources is restricted under Subpart 225.71.
13. Section 225.401-70 is amended in the introductory text by revising the last sentence to read as follows:

225.401-70 Products subject to trade agreement acts. * * * The following list indicates those products that are eligible for designated and NAFTA countries, but are not eligible for Caribbean Basin countries.

14. Sections 225.402 and 225.403 are revised to read as follows:

225.402 General. To estimate the value of the acquisition, use the total estimated value of end products subject to trade agreement acts (see 225.401-70).

225.403 Trade Agreements Act. (c) For acquisitions subject to the Trade Agreements Act, acquire only U.S.-made, qualifying country, or eligible end products unless—
s.

14. Sections 225.402 and 225.403 are revised to read as follows:

225.402 General. To estimate the value of the acquisition, use the total estimated value of end products subject to trade agreement acts (see 225.401-70).

225.403 Trade Agreements Act. (c) For acquisitions subject to the Trade Agreements Act, acquire only U.S.-made, qualifying country, or eligible end products unless—
(i) The contracting officer determines that offers of U.S.-made, qualifying country, or eligible products from responsive, responsible offerors are either—
(A) Not received; or
(B) Insufficient to fill the Government's requirements. In this case, accept all responsive, responsible offers of U.S.-made, qualifying country, and eligible products before accepting any other offers; or
(ii) A national interest waiver under 19 U.S.C. 2512(b)(2) is granted on a case-by-case basis. Except as delegated in paragraphs (c)(i)(A) and (B) of this section, submit any request for a national interest waiver to the Director of Defense Procurement in accordance with department or agency procedures. Include supporting rationale with the request.
(A) The head of the contracting activity may approve a national interest waiver for a purchase by an overseas purchasing activity, if the waiver is supported by a written statement from the requiring activity that the products being acquired are critical for the support of U.S. forces stationed abroad.
(B) The Commander or Director, Defense Energy Support Center, may approve national interest waivers for purchases of fuel for use by U.S. forces overseas.
15. Subpart 225.5 is revised to read as follows:
Subpart 225.5—Evaluating Foreign Offers—Supply Contracts
Sec. 225.502 Application. 225.503 Group offers. 225.504 Evaluation examples.
225.502 Application. (b) Use the following procedures instead of the procedures in FAR 25.502(b) for acquisitions subject to the Trade Agreements Act:
rs for purchases of fuel for use by U.S. forces overseas.
15. Subpart 225.5 is revised to read as follows:
Subpart 225.5—Evaluating Foreign Offers—Supply Contracts
Sec. 225.502 Application. 225.503 Group offers. 225.504 Evaluation examples.
225.502 Application. (b) Use the following procedures instead of the procedures in FAR 25.502(b) for acquisitions subject to the Trade Agreements Act:
(i) Consider only offers of U.S.-made, qualifying country, or eligible end products, except as permitted by 225.403.
(ii) If price is the determining factor, award on the low offer.
(c) Use the following procedures instead of the procedures in FAR 25.502(c) for acquisitions subject to the Buy American Act or the Balance of Payments Program:
(i)(A) If the acquisition is subject only to the Buy American Act or the Balance of Payments Program, then only qualifying country end products are exempt from application of the Buy American Act or Balance of Payments Program evaluation factor.
(B) If the acquisition is also subject to NAFTA, then NAFTA country end products are also exempt from application of the Buy American Act or Balance of Payments Program evaluation factor.
(C) If the acquisition is also subject to the Trade Agreements Act, then designated country end products and Caribbean Basin Country end products are also exempt from application of the Buy American Act or Balance of Payments Program evaluation factor.
AFTA, then NAFTA country end products are also exempt from application of the Buy American Act or Balance of Payments Program evaluation factor.
(C) If the acquisition is also subject to the Trade Agreements Act, then designated country end products and Caribbean Basin Country end products are also exempt from application of the Buy American Act or Balance of Payments Program evaluation factor.
(ii) If price is the determining factor, use the following procedures:
(A) If the low offer is a domestic offer, award on that offer.
(B) If there are no domestic offers, award on the low offer (see example in 225.504(1)).
(C) If the low offer is a foreign offer that is exempt from application of the Buy American Act or Balance of Payments Program evaluation factor, award on that offer. (If the low offer is a qualifying country offer from a country listed at 225.872-1(b) and the Trade Agreements Act does not apply, execute a determination in accordance with 225.872-4.)
(D) If the low offer is a foreign offer that is not exempt from application of the Buy American Act or Balance of Payments Program evaluation factor, and there is another foreign offer that is exempt, and is lower than the lowest domestic offer, award on the low foreign offer (see example in 225.504(2)).
(E) Otherwise, apply the 50 percent evaluation factor to the low foreign offer.
( 1 ) If the price of the low domestic offer is less than the evaluated price of the low foreign offer, award on the low domestic offer (see example in 225.504(3)).
( 2 ) If the evaluated price of the low foreign offer remains less than the low domestic offer, award on the low foreign offer (see example in 225.504(4)).
therwise, apply the 50 percent evaluation factor to the low foreign offer.
( 1 ) If the price of the low domestic offer is less than the evaluated price of the low foreign offer, award on the low domestic offer (see example in 225.504(3)).
( 2 ) If the evaluated price of the low foreign offer remains less than the low domestic offer, award on the low foreign offer (see example in 225.504(4)).
(iii) If price is not the determining factor, use the following procedures:
(A) If there are domestic offers, apply the 50 percent Buy American Act or Balance of Payments Program evaluation factor to all foreign offers unless an exemption applies.
(B) Evaluate in accordance with the criteria of the solicitation.
(C) If these procedures will not result in award on a domestic offer, reevaluate offers without the 50 percent factor. If this will result in award on an offer to which the Buy American Act or Balance of Payments Program applies, but evaluation in accordance with paragraph (c)(ii) of this section would result in award on a domestic offer, proceed with award only after execution of a determination in accordance with 225.103(a)(ii)(B), that domestic preference would be inconsistent with the public interest.

225.503 Group offers. Evaluate group offers in accordance with FAR 25.503, but apply the evaluation procedures of 225.502.

225.504 Evaluation examples. The following examples illustrate the evaluation procedures in 225.502(c)(ii). The examples assume that the contracting officer has eliminated all offers that are unacceptable for reasons other than price or a trade agreement and that price is the determining factor in contract award. The same evaluation procedures and the 50 percent evaluation factor apply regardless of whether the acquisition is subject to the Buy American Act (BAA) or the Balance of Payments Program (BOPP).
examples assume that the contracting officer has eliminated all offers that are unacceptable for reasons other than price or a trade agreement and that price is the determining factor in contract award. The same evaluation procedures and the 50 percent evaluation factor apply regardless of whether the acquisition is subject to the Buy American Act (BAA) or the Balance of Payments Program (BOPP).
(1) Example 1.
Offer A $945,000 Foreign offer subject to BAA/BOPP Offer B $950,000 Foreign offer exempt from BAA/BOPP Since no domestic offers are received, do not apply the evaluation factor. Award on Offer A.
(2) Example 2.
Offer A $950,000 Domestic offer Offer B $890,000 Foreign offer exempt from BAA/BOPP Offer C $880,000 Foreign offer subject to BAA/BOPP Since the exempt foreign offer is lower than the domestic offer, do not apply the evaluation factor. Award on Offer C.
(3) Example 3.
Offer A $9,100 Foreign offer exempt from BAA/BOPP Offer B $8,900 Domestic offer Offer C $6,000 Foreign offer subject to BAA/BOPP Since the domestic offer is lower than the exempt foreign offer, apply the 50 percent evaluation factor to Offer C. This results in an evaluated price of $9,000 for Offer C. Award on Offer B.
(4) Example 4.
Offer A $910,000 Foreign offer exempt from BAA/BOPP Offer B $890,000 Domestic offer Offer C $590,000 Foreign offer subject to BAA/BOPP Since the domestic offer is lower than the exempt foreign offer, apply the 50 percent evaluation factor to Offer C. This results in an evaluated price of $885,000 for Offer C. Award on Offer C.
16. Subpart 225.6 is added to read as follows:

Subpart 225.6—Trade Sanctions
Sec. 225.670 Secondary Arab boycott of Israel. 225.670-1 Restriction. 225.670-2 Procedures. 225.670-3 Exceptions. 225.670-4 Waivers. 225.670 Secondary Arab boycott of Israel.
225.670-1 Restriction. In accordance with 10 U.S.C. 2410i, do not enter into a contract with a foreign entity unless it has certified that it does not comply with the secondary Arab boycott of Israel
225.6—Trade Sanctions
Sec. 225.670 Secondary Arab boycott of Israel. 225.670-1 Restriction. 225.670-2 Procedures. 225.670-3 Exceptions. 225.670-4 Waivers. 225.670 Secondary Arab boycott of Israel.
225.670-1 Restriction. In accordance with 10 U.S.C. 2410i, do not enter into a contract with a foreign entity unless it has certified that it does not comply with the secondary Arab boycott of Israel.

225.670-2 Procedures. For contracts awarded to the Canadian Commercial Corporation (CCC), the CCC will submit a certification from its proposed subcontractor with the other required precontractual information (see 225.870).

225.670-3 Exceptions. This restriction does not apply to—
(a) Purchases at or below the simplified acquisition threshold;
(b) Contracts for consumable supplies, provisions, or services for the support of United States forces or of allied forces in a foreign country; or
(c) Contracts pertaining to the use of any equipment, technology, data, or services for intelligence or classified purposes, or to the acquisition or lease thereof, in the interest of national security.

225.670-4 Waivers. The Secretary of Defense may waive this restriction on the basis of national security interests. Forward waiver requests to the Director, Defense Procurement, ATTN: OUSD(AT&L)DP/FC, 3060 Defense Pentagon, Washington, DC 20301-3060.
17. Subpart 225.7 is revised to read as follows:

Subpart 225.7—Prohibited Sources
Sec. 225.770 Ownership or control by the government of a terrorist country. 225.770-1 Prohibition. 225.770-2 Procedures. 225.770-3 Waiver. 225.770 Ownership or control by the government of a terrorist country.
225.770-1 Prohibition. (a) In accordance with 10 U.S.C. 2327(b), do not award a contract of $100,000 or more to a firm or to a subsidiary of a firm if the government of a terrorist country, either directly or indirectly, has a significant interest—
(1) In the firm; or
(2) In the subsidiary or the firm that owns the subsidiary.
0 Ownership or control by the government of a terrorist country.
225.770-1 Prohibition. (a) In accordance with 10 U.S.C. 2327(b), do not award a contract of $100,000 or more to a firm or to a subsidiary of a firm if the government of a terrorist country, either directly or indirectly, has a significant interest—
(1) In the firm; or
(2) In the subsidiary or the firm that owns the subsidiary.
(b) Do not consent to any subcontract with a firm, or a subsidiary of a firm, that the Secretary of Defense has identified as being owned or controlled by the government of a terrorist country unless the agency head states in writing the compelling reasons for the subcontract.

225.770-2 Procedures. Forward any disclosure that the government of a terrorist country has a significant interest in an offeror or a subsidiary of an offeror, through the head of the agency, to the Director, Defense Procurement, ATTN: OUSD(AT&L)DP/FC, 3060 Defense Pentagon, Washington, DC 20301-3060.

225.770-3 Waiver. The Secretary of Defense may waive the prohibition in 225.770-1(a) in accordance with 10 U.S.C. 2327(c). The Secretary of Defense may not delegate this waiver authority.
18. Subpart 225.8 is revised to read as follows:

Subpart 225.8—Other International Agreements and Coordination
Sec. 225.802 Procedures. 225.802-70 Contracts for performance outside the United States and Canada. 225.802-71 End use certificates. 225.870 Contracting with Canadian contractors. 225.870-1 General. 225.870-2 Solicitation of Canadian contractors. 225.870-3 Submission of offers. 225.870-4 Contracting procedures. 225.870-5 Contract administration. 225.870-6 Termination procedures. 225.870-7 Acceptance of Canadian supplies. 225.870-8 Industrial security. 225.871 North Atlantic Treaty Organization cooperative projects. 225.871-1 Scope. 225.871-2 Definitions. 225.871-3 General. 225.871-4 Statutory waivers. 225.871-5 Directed subcontracting. 225.871-6 Disposal of property. 225.871-7 Congressional notification
225.870-5 Contract administration. 225.870-6 Termination procedures. 225.870-7 Acceptance of Canadian supplies. 225.870-8 Industrial security. 225.871 North Atlantic Treaty Organization cooperative projects. 225.871-1 Scope. 225.871-2 Definitions. 225.871-3 General. 225.871-4 Statutory waivers. 225.871-5 Directed subcontracting. 225.871-6 Disposal of property. 225.871-7 Congressional notification. 225.872 Contracting with qualifying country sources. 225.872-1 General. 225.872-2 Applicability. 225.872-3 Solicitation procedures. 225.872-4 Individual determinations. 225.872-5 Contract administration. 225.872-6 Audit. 225.872-7 Industrial security for qualifying countries. 225.872-8 Subcontracting with qualifying country sources. 225.873 Waiver of United Kingdom commercial exploitation levies. 225.873-1 Policy. 225.873-2 Procedures. 225.802 Procedures. (b) Information on specific agreements is available as follows:
(i) Memoranda of understanding and other international agreements between the United States and the countries listed in 225.872-1 are maintained in the Foreign Contracting Directorate, Office of the Director of Defense Procurement ((703) 697-9351/2/3; DSN 227-9351/2/3).
(ii) Military Assistance Advisory Groups, Naval Missions, and Joint U.S. Military Aid Groups normally have copies of the agreements applicable to the countries concerned.
(iii) Copies of international agreements covering the United Kingdom of Great Britain and Northern Ireland, Western European countries, North Africa, and the Middle East are filed with the U.S. European Command.
7-9351/2/3).
(ii) Military Assistance Advisory Groups, Naval Missions, and Joint U.S. Military Aid Groups normally have copies of the agreements applicable to the countries concerned.
(iii) Copies of international agreements covering the United Kingdom of Great Britain and Northern Ireland, Western European countries, North Africa, and the Middle East are filed with the U.S. European Command.
(iv) Agreements with countries in the Pacific and Far East are filed with the U.S. Pacific Command.

225.802-70 Contracts for performance outside the United States and Canada. (a) When a contracting office anticipates placement of a contract for performance outside the United States and Canada, and the contracting office is not under the jurisdiction of a command for the country involved, the contracting office shall maintain liaison with the cognizant contract administration office (CAO) during preaward negotiations and postaward administration. The CAO will provide pertinent information for contract negotiations, effect appropriate coordination, and obtain required approvals for the performance of the contract.
(b) If the acquisition requires the performance of work in the foreign country by U.S. personnel or a third country contractor, or if the acquisition requires logistics support for contract employees, source inspection, or additional Government employees—
(1) The contracting officer shall coordinate with the CAO before contract award;
(2) The contracting officer shall request the following information from the CAO:
(i) The applicability of any international agreements to the acquisition.
(ii) Security requirements applicable to the area.
(iii) The standards of conduct for the prospective contractor and its employees and any consequences for violation of the standards of conduct.
(iv) Requirements for use of foreign currencies, including applicability of U.S. holdings of excess foreign currencies.
O:
(i) The applicability of any international agreements to the acquisition.
(ii) Security requirements applicable to the area.
(iii) The standards of conduct for the prospective contractor and its employees and any consequences for violation of the standards of conduct.
(iv) Requirements for use of foreign currencies, including applicability of U.S. holdings of excess foreign currencies.
(v) Availability of logistical support for contractor employees.
(vi) Information on taxes and duties from which the Government may be exempt;
(3) The contracting officer shall furnish the following information to the CAO:
(i) A synopsis of the work to be performed and, if practical, a copy of the solicitation.
(ii) Any contractor logistical support desired in support of U.S. or foreign military sale requirements.
(iii) Contract performance period and estimated contract value.
(iv) Number and nationality of contractor employees and date of planned arrival of contractor personnel.
(v) Contract security requirements.
(vi) Other pertinent information to effect complete coordination and cooperation.

225.802-71 End use certificates. Contracting officers considering the purchase of an item from a foreign source may encounter a request for the signing of a certificate to indicate that the Armed Forces of the United States is the end user of the item, and that the U.S. Government will not transfer the item to third parties without authorization from the Government of the country selling the item. When encountering this situation, refer to DoD Directive 2040.3, End Use Certificates, for guidance.

225.870 Contracting with Canadian contractors.
225.870-1 General. (a) The Canadian Government guarantees to the U.S. Government all commitments, obligations, and
(b) For production planning purposes, Canada is part of the defense industrial base (see 225.870-2(b)).
ountry selling the item. When encountering this situation, refer to DoD Directive 2040.3, End Use Certificates, for guidance.

225.870 Contracting with Canadian contractors.
225.870-1 General. (a) The Canadian Government guarantees to the U.S. Government all commitments, obligations, and
(b) For production planning purposes, Canada is part of the defense industrial base (see 225.870-2(b)).
(c) The Canadian Commercial Corporation will award and administer contracts with contractors located in Canada, except for—
(1) Negotiated acquisitions for experimental, developmental, or research work under projects other than the Defense Development Sharing Program;
(2) Acquisitions of unusual or compelling urgency;
(3) Acquisitions at or below the simplified acquisition threshold; or
(4) Acquisitions made by DoD activities located in Canada.
(d) The Canadian Commercial Corporation uses provisions in contracts with Canadian or U.S. concerns that give DoD the same production rights, data, and information that DoD would obtain in contracts with U.S. concerns.
(e) The Government of Canada will provide the following services under contracts with the Canadian Commercial Corporation without charge to DoD:
(1) Contract administration services, including—
(i) Cost and price analysis;
(ii) Industrial security;
(iii) Accountability and disposal of Government property;
(iv) Production expediting;
(v) Compliance with Canadian labor laws;
(vi) Processing of termination claims and disposal of termination inventory;
(vii) Customs documentation;
(viii) Processing of disputes and appeals; and
(ix) Such other related contract administration functions as may be required with respect to the Canadian Commercial Corporation contract with the Canadian supplier.
(iv) Production expediting;
(v) Compliance with Canadian labor laws;
(vi) Processing of termination claims and disposal of termination inventory;
(vii) Customs documentation;
(viii) Processing of disputes and appeals; and
(ix) Such other related contract administration functions as may be required with respect to the Canadian Commercial Corporation contract with the Canadian supplier.
(2) Audits. The Public Works and Government Services Canada performs audits when needed. Route requests for audit on non-Canadian Commercial Corporation contracts through the cognizant contract management office of the Defense Contract Management Agency.
(3) Inspection. The Department of National Defence (Canada) provides inspection personnel, services, and facilities at no charge to DoD departments and agencies (see 225.870-7).

225.870-2 Solicitation of Canadian contractors. (a) Except for acquisitions described in 225.870-1(c)(1) through (4), include Canadian firms on solicitation mailing lists and comparable source lists only at the request of the Canadian Commercial Corporation.
(b) Include Canadian planned producers under the Industrial Preparedness Production Planning Program on solicitation mailing lists for their planned items (see FAR 14.205-1).
(c) Send solicitations directly to Canadian firms appearing on the appropriate solicitation mailing lists. Send a complete copy of the solicitation and a listing of Canadian firms solicited to the Canadian Commercial Corporation, 11th Floor, 50 O'Connor Street, Ottawa, Ontario, K1A-0S6, Canada.
(d) If requested, furnish a solicitation to the Canadian Commercial Corporation even if no Canadian firm is solicited.
tions directly to Canadian firms appearing on the appropriate solicitation mailing lists. Send a complete copy of the solicitation and a listing of Canadian firms solicited to the Canadian Commercial Corporation, 11th Floor, 50 O'Connor Street, Ottawa, Ontario, K1A-0S6, Canada.
(d) If requested, furnish a solicitation to the Canadian Commercial Corporation even if no Canadian firm is solicited.
(e) Handle acquisitions at or below the simplified acquisition threshold directly with Canadian firms and not through the Canadian Commercial Corporation.

225.870-3 Submission of offers. (a) As indicated in 225.870-4, the Canadian Commercial Corporation is the prime contractor. To indicate acceptance of offers by individual Canadian companies, the Canadian Commercial Corporation issues a letter supporting the Canadian offer and containing the following information:
(1) Name of the Canadian offeror.
(2) Confirmation and endorsement of the offer in the name of the Canadian Commercial Corporation.
(3) A statement that the Corporation shall subcontract 100 percent with the offeror.
(b) When a Canadian offer cannot be processed through the Canadian Commercial Corporation in time to meet the date for receipt of offers, the Corporation may permit Canadian firms to submit offers directly. However, the contracting officer shall receive the Canadian Commercial Corporation's endorsement before contract award.
(c) The Canadian Commercial Corporation will submit all sealed bids in terms of U.S. currency. Do not adjust contracts awarded under sealed bidding for losses or gains from fluctuation in exchange rates.
ers, the Corporation may permit Canadian firms to submit offers directly. However, the contracting officer shall receive the Canadian Commercial Corporation's endorsement before contract award.
(c) The Canadian Commercial Corporation will submit all sealed bids in terms of U.S. currency. Do not adjust contracts awarded under sealed bidding for losses or gains from fluctuation in exchange rates.
(d) Except for sealed bids, the Canadian Commercial Corporation normally will submit offers and quotations in terms of Canadian currency. The Corporation may, at the time of submitting an offer, elect to quote and receive payment in terms of U.S. currency, in which case the contract—
(1) Shall provide for payment in U.S. currency; and
(2) Shall not be adjusted for losses or gains from fluctuation in exchange rates.

225.870-4 Contracting procedures. (a) Except for contracts described in 225.870-1(c)(1) through (4), award individual contracts covering purchases from suppliers located in Canada to the Canadian Commercial Corporation, 11th Floor, 50 O'Connor Street, Ottawa, Ontario, Canada, K1A-0S6.
(b) Direct communication with the Canadian supplier is authorized and encouraged in connection with all technical aspects of the contract, provided the Corporation's approval is obtained on any matters involving changes to the contract.
(c) Identify in the contract, the type of currency, i.e. , U.S. or Canadian. Contracts that provide for payment in Canadian currency shall—
(1) Quote the contract price in terms of Canadian dollars and identify the amount by the initials “CN”; e.g. , $1,647.23CN; and
ical aspects of the contract, provided the Corporation's approval is obtained on any matters involving changes to the contract.
(c) Identify in the contract, the type of currency, i.e. , U.S. or Canadian. Contracts that provide for payment in Canadian currency shall—
(1) Quote the contract price in terms of Canadian dollars and identify the amount by the initials “CN”; e.g. , $1,647.23CN; and
(2) Clearly indicate on the face of the contract the U.S./Canadian conversion rate at the time of award and the U.S. dollar equivalent of the Canadian dollar contract amount.

225.870-5 Contract administration. (a) Assign contract administration in accordance with Part 242. When the Defense Contract Management Agency will perform contract administration in Canada, name in the contract the following payment office for disbursement of DoD funds (DoD Department Code: 17—Navy; 21—Army; 57—Air Force; 97—all other DoD components), whether payment is in Canadian or U.S. dollars: DFAS—Columbus Center; DFAS-CO/New Dominion Division; PO Box 182041; Columbus, OH 43218-2041.
(b) The following procedures apply to cost-reimbursement type contracts:
(1) The Public Works and Government Services Canada (PWGSC) automatically arranges audits on contracts with the Canadian Commercial Corporation.
(i) Consulting and Audit Canada (CAC) furnishes audit reports to PWGSC.
(ii) Upon advice from PWGSC, the Canadian Commercial Corporation certifies the invoice and forwards it with Standard Form (SF) 1034, Public Voucher, to the administrative
(2) For contracts placed directly with Canadian firms, the administrative contracting officer requests audits from the CAC, Ottawa, Ontario, Canada.
.
(i) Consulting and Audit Canada (CAC) furnishes audit reports to PWGSC.
(ii) Upon advice from PWGSC, the Canadian Commercial Corporation certifies the invoice and forwards it with Standard Form (SF) 1034, Public Voucher, to the administrative
(2) For contracts placed directly with Canadian firms, the administrative contracting officer requests audits from the CAC, Ottawa, Ontario, Canada.
(i) The CAC/PWGSC approves invoices on a provisional basis pending completion of the contract and final audit.
(ii) The CAC/PWGSC forwards these invoices, accompanied by SF 1034, Public Voucher, to the administrative contracting officer for further processing and transmittal to the disbursing officer.
(iii) The CAC/PWGSC furnishes periodic advisory audit reports directly to the administrative contracting officer.

225.870-6 Termination procedures. (a) The Canadian Commercial Corporation will continue administering contracts that the U.S. contracting officer terminates.
(b) The Corporation will settle all Canadian subcontracts in accordance with the policies, practices, and procedures of the Canadian Government.
(c) The U.S. agency administering the contract with the Canadian Commercial Corporation shall provide any services required by the Canadian Commercial Corporation, including disposal of inventory, for settlement of any subcontracts placed in the United States. Settlement of such U.S. subcontracts will be in accordance with this regulation.

225.870-7 Acceptance of Canadian supplies. (a) For contracts placed in Canada, either with the Canadian Commercial Corporation or directly with Canadian suppliers, the Department of National Defence (Canada) will perform any necessary contract quality assurance and/or acceptance, as applicable.
the United States. Settlement of such U.S. subcontracts will be in accordance with this regulation.

225.870-7 Acceptance of Canadian supplies. (a) For contracts placed in Canada, either with the Canadian Commercial Corporation or directly with Canadian suppliers, the Department of National Defence (Canada) will perform any necessary contract quality assurance and/or acceptance, as applicable.
(b) Signature by the Department of National Defence (Canada) quality assurance representative on the DoD inspection and acceptance form is satisfactory evidence of acceptance for payment purposes.

225.870-8 Industrial security. Industrial security for Canada shall be in accordance with the U.S.-Canada Industrial Security Agreement of March 31, 1952, as amended.

225.871 North Atlantic Treaty Organization cooperative projects.
225.871-1 Scope. This section—
(a) Implements 22 U.S.C. 2767 and 10 U.S.C. 2350b; and
(b) Provides guidance on awarding contracts for North Atlantic Treaty Organization (NATO) cooperative projects.

225.871-2 Definitions. (a) Cooperative project means a jointly managed arrangement—
(1) Described in a written agreement between the parties;
(2) Undertaken to further the objectives of standardization, rationalization, and interoperability of the armed forces of NATO member countries; and
(3) Providing for—
(i) One or more of the other participants to share with the United States the cost of research and development, testing, evaluation, or joint production (including follow-on support) of certain defense articles;
(ii) Concurrent production in the United States and in another member country of a defense article jointly developed; or
(iii) Acquisition by the United States of a defense article or defense service from another member country.
bility; and
(3) Is approved by the appropriate DoD official.

225.871-4 Statutory waivers. (a) For contracts or subcontracts placed outside the United States, the Deputy Secretary of Defense may waive any provision of law that specifically prescribes—
(1) Procedures for the formation of contracts;
(2) Terms and conditions for inclusion in contracts;
(3) Requirements or preferences for—
(i) Goods grown, produced, or manufactured in the United States or in U.S. Government-owned facilities; or
(ii) Services to be performed in the United States; or
(4) Requirements regulating the performance of contracts.
(b) There is no authority for waiver of—
(1) Any provision of the Arms Export Control Act (22 U.S.C. 2751);
(2) Any provision of 10 U.S.C. 2304;
(3) The cargo preference laws of the United States, including the Military Cargo Preference Act of 1904 (10 U.S.C. 2631) and the Cargo Preference Act of 1954 (46 U.S.C. 1241(b)); or
(4) Any of the financial management responsibilities administered by the Secretary of the Treasury.
(c) Forward any request for waiver under a cooperative project to the Deputy Secretary of Defense, through the Director of Defense Procurement, Office of the Under Secretary of Defense (Acquisition, Technology, and Logistics). The waiver request shall include a draft Determination and Findings for signature by the Deputy Secretary of Defense establishing that the waiver is necessary to significantly further NATO standardization, rationalization, and interoperability.
(d) Obtain the approval of the Deputy Secretary of Defense before committing to make a waiver in an agreement or a contract.

225.871-5 Directed subcontracting. (a) The Director of Defense Procurement may authorize the direct placement of subcontracts with particular subcontractors. Directed subcontracting is not authorized unless specifically addressed in the cooperative project agreement.
(d) Obtain the approval of the Deputy Secretary of Defense before committing to make a waiver in an agreement or a contract.

225.871-5 Directed subcontracting. (a) The Director of Defense Procurement may authorize the direct placement of subcontracts with particular subcontractors. Directed subcontracting is not authorized unless specifically addressed in the cooperative project agreement.
(b) In some instances, it may not be feasible to name specific subcontractors at the time the agreement is concluded. However, the agreement shall clearly state the general provisions for work sharing at the prime and subcontract level.
(c) The agreement is the authority for a contractual provision requiring the contractor to place certain subcontracts with particular subcontractors. No separate justification and approval during the acquisition process is required.

225.871-6 Disposal of property. Dispose of property that is jointly acquired by the members of a cooperative project under the procedures established in the agreement or in a manner consistent with the terms of the agreement.

225.871-7 Congressional notification. (a) Congressional notification is required when DoD makes a determination to award a contract or subcontract to a particular entity, if the determination was not part of the certification made under 22 U.S.C. 2767(f) before finalizing the cooperative agreement.
(1) Departments and agencies shall provide a proposed Congressional notice to the Director of Defense Procurement in sufficient time to forward to Congress before the time of contract award.
(2) The proposed notice shall include the reason it is necessary to use the authority to designate a particular contractor or subcontractor.
22 U.S.C. 2767(f) before finalizing the cooperative agreement.
(1) Departments and agencies shall provide a proposed Congressional notice to the Director of Defense Procurement in sufficient time to forward to Congress before the time of contract award.
(2) The proposed notice shall include the reason it is necessary to use the authority to designate a particular contractor or subcontractor.
(b) Congressional notification is also required each time a statutory waiver under 225.871-4 is incorporated in a contract or a contract modification, if such information was not provided in the certification to Congress before finalizing the cooperative agreement.

225.872 Contracting with qualifying country sources.
225.872-1 General. (a) As a result of memoranda of understanding and other international agreements, DoD has determined it inconsistent with the public interest to apply restrictions of the Buy American Act or the Balance of Payments Program to the acquisition of defense equipment that is mined, produced, or manufactured in any of the following countries (referred to in this part as “qualifying countries”):
Australia Belgium Canada Denmark Egypt Federal Republic of Germany France Greece Israel Italy Luxembourg Netherlands Norway Portugal Spain Switzerland Turkey United Kingdom of Great Britain and Northern Ireland (b) Individual acquisitions for products of the following qualifying countries may, on a purchase-by-purchase basis (see 225.872-4), be exempted from application of the Buy American Act and the Balance of Payments Program as inconsistent with the public interest'
Austria Finland Sweden (c) The determination in paragraph (a) of this subsection does not limit the authority of the Secretary concerned to restrict acquisitions to domestic sources or reject an otherwise acceptable offer from a qualifying country source when considered necessary for national defense reasons.

225.872-2 Applicability. (a) This section applies to all acquisitions of supplies except those restricted by—
) The determination in paragraph (a) of this subsection does not limit the authority of the Secretary concerned to restrict acquisitions to domestic sources or reject an otherwise acceptable offer from a qualifying country source when considered necessary for national defense reasons.

225.872-2 Applicability. (a) This section applies to all acquisitions of supplies except those restricted by—
(1) U.S. National Disclosure Policy, DoDD 5230.11, Disclosure of Classified Military Information to Foreign Governments and International Organizations;
(2) U.S. defense mobilization base requirements purchased under the authority of FAR 6.302-3(a)(2)(i) except for quantities in excess of that required to maintain the defense mobilization base. This restriction does not apply to Canadian planned producers.
(i) Review individual solicitations to determine whether this restriction applies.
(ii) Information concerning restricted items may be obtained from the Deputy Under Secretary of Defense (Industrial Affairs);
(3) Other U.S. laws or regulations ( e.g., the annual DoD appropriations act); and
(4) U.S. industrial security requirements.
(b) This section does not apply to construction contracts.

225.872-3 Solicitation procedures. (a) Include qualifying country sources on solicitation mailing lists upon their request (see FAR 14.205).
(b) Except for items developed under the U.S./Canadian Development Sharing Program, use the criteria for soliciting and awarding contracts to small business concerns under FAR part 19 without regard to whether there are potential qualifying country sources for the end product. Do not consider an offer of a qualifying country end product if the solicitation is identified for the exclusive participation of small business concerns.
(c) Send solicitations directly to qualifying country sources. Solicit Canadian sources through the Canadian Commercial Corporation in accordance with 225.870.
ard to whether there are potential qualifying country sources for the end product. Do not consider an offer of a qualifying country end product if the solicitation is identified for the exclusive participation of small business concerns.
(c) Send solicitations directly to qualifying country sources. Solicit Canadian sources through the Canadian Commercial Corporation in accordance with 225.870.
(d) Use international air mail if solicitation destinations are outside the United States and security classification permits such use.
(e) If unusual technical or security requirements preclude the acquisition of otherwise acceptable defense equipment from qualifying country sources, review the need for such requirements. Do not impose unusual technical or security requirements solely for the purpose of precluding the acquisition of defense equipment from qualifying countries.
(f) Do not automatically exclude qualifying country sources from submitting offers because their supplies have not been tested and evaluated by the department or agency.
(1) Consider the adequacy of qualifying country service testing on a case-by-case basis. Departments or agencies that must limit solicitations to sources whose items have been tested and evaluated by the department or agency shall consider supplies from qualifying country sources that have been tested and accepted by the qualifying country for service use.
(2) The department or agency may perform a confirmatory test, if necessary.
(3) Apply U.S. test and evaluation standards, policies, and procedures when the department or agency decides that confirmatory tests of qualifying country end products are necessary.
(4) If it appears that these provisions might adversely delay service programs, obtain the concurrence of the Under Secretary of Defense (Acquisition, Technology, and Logistics), before excluding the qualifying country source from consideration.
ion standards, policies, and procedures when the department or agency decides that confirmatory tests of qualifying country end products are necessary.
(4) If it appears that these provisions might adversely delay service programs, obtain the concurrence of the Under Secretary of Defense (Acquisition, Technology, and Logistics), before excluding the qualifying country source from consideration.
(g) Permit industry representatives from a qualifying country to attend symposia, program briefings, prebid conferences (see FAR 14.207 and 15.201(c)), and similar meetings that address U.S. defense equipment needs and requirements. When practical, structure these meetings to allow attendance by representatives of qualifying country concerns.

225.872-4 Individual determinations. (a) If the offer of an end product from a qualifying country source listed in 225.872-1(b), as evaluated, is low or otherwise eligible for award, prepare a determination and findings exempting the acquisition from the Buy American Act and Balance of Payments Program as inconsistent with the public interest, unless another exception such as the Trade Agreements Act applies.
(b) Obtain signature of the determination and findings—
(1) At a level above the contracting officer, if the acquisition is valued at $100,000 or less; or
(2) By the chief of the contracting office, if the acquisition is valued at more than $100,000.
(c) Prepare the determination and findings substantially as follows:
Service or Agency
Exemption of the Buy American Act and Balance of Payments Program
Determination and Findings
Upon the basis of the following findings and determination which I hereby make in accordance with the provisions of FAR 25.103(a), the acquisition of a qualifying country end product may be made as follows:
Findings
1. The ( contracting office ) proposes to purchase under contract number ____, ( describe item ) mined, produced, or manufactured in ( qualifying country of origin )
and Findings
Upon the basis of the following findings and determination which I hereby make in accordance with the provisions of FAR 25.103(a), the acquisition of a qualifying country end product may be made as follows:
Findings
1. The ( contracting office ) proposes to purchase under contract number ____, ( describe item ) mined, produced, or manufactured in ( qualifying country of origin ). The total estimated cost of this acquisition is ____.
2. The United States Government and the Government of ____ have agreed to remove barriers to procurement at the prime and subcontract level for defense equipment produced in each other's countries insofar as laws and regulations permit.
3. The agreement provides that the Department of Defense will evaluate competitive offers of qualifying country end products mined, produced, or manufactured in ( qualifying country ) without imposing any price differential under the Buy American Act or Balance of Payments Program and without taking applicable U.S. customs and duties into consideration so that such items may better compete for sales of defense equipment to the Department of Defense. In addition, the Agreement stipulates that acquisitions of such items shall fully satisfy Department of Defense requirements for performance, quality, and delivery and shall cost the Department of Defense no more than would comparable U.S. source or other foreign source defense equipment eligible for award.
4. To achieve the foregoing objectives, the solicitation contained the clause ( title and number of the Buy American Act clause contained in the contract ). Offers were solicited from other sources and the offer received from ( offeror ) is found to be otherwise eligible for award.
Determination
I hereby determine that it is inconsistent with the public interest to apply the restrictions of the Buy American Act or the Balance of Payments Program to the offer described in this determination and findings.
(Date)
225.872-5 Contract administration
Offers were solicited from other sources and the offer received from ( offeror ) is found to be otherwise eligible for award.
Determination
I hereby determine that it is inconsistent with the public interest to apply the restrictions of the Buy American Act or the Balance of Payments Program to the offer described in this determination and findings.
(Date)
225.872-5 Contract administration. (a) Arrangements exist with some qualifying countries to provide reciprocal contract administration services. Some arrangements are at no cost to either government. To determine whether such an arrangement has been negotiated and what contract administration functions are covered, contact the Deputy Director of Defense Procurement (Foreign Contracting), ((703) 697-9351/2/3, DSN 227-9351/2/3).
(b) When contract administration services are required on contracts to be performed in qualifying countries, direct the request to the cognizant activity listed in the Federal Directory of Contract Administration Services. The cognizant activity also will arrange contract administration services for DoD subcontracts that qualifying country sources place in the United States.
(c) The contract administration activity receiving a delegation shall determine whether any portions of the delegation are covered by memoranda of understanding annexes and, if so, shall delegate those functions to the appropriate organization in the qualifying country's government.
(d) Information on quality assurance delegations to foreign governments is in subpart 246.4, Government Contract Quality Assurance.

225.872-6 Audit. (a) Memoranda of understanding with some qualifying countries contain annexes that provide for reciprocal “no-cost” audits of contracts and subcontracts (pre- and post-award).
(b) To determine if such an annex is applicable to a particular qualifying country, contact the Deputy Director of Defense Procurement (Foreign Contracting), ((703) 697-9351/2/3, DSN 227-9351/2/3).
e.

225.872-6 Audit. (a) Memoranda of understanding with some qualifying countries contain annexes that provide for reciprocal “no-cost” audits of contracts and subcontracts (pre- and post-award).
(b) To determine if such an annex is applicable to a particular qualifying country, contact the Deputy Director of Defense Procurement (Foreign Contracting), ((703) 697-9351/2/3, DSN 227-9351/2/3).
(c) Handle requests for audits in qualifying countries in accordance with 215.404-2(c).
(1) Except for the United Kingdom, send the request to the administrative contracting officer at the cognizant activity listed in Section 2B of the Federal Directory of Contract Administration Services. Send the request for audit from the United Kingdom directly to their Ministry of Defence.
(2) Send an advance copy of the request to the focal point identified by the Deputy Director of Defense Procurement (Foreign Contracting).

225.872-7 Industrial security for qualifying countries. The required procedures for safeguarding classified defense information necessary for the performance of contracts awarded to qualifying country sources are in the DoD Industrial Security Regulation DoD 5220.22-R (implemented for the Army by AR 380-49; for the Navy by SECNAV Instruction 5510.1H; for the Air Force by AFI 31-601; for the Defense Information Systems Agency by DCA Instruction 240-110-8; and for the National Imagery and Mapping Agency by NIMA Instruction 5220.22).

225.872-8 Subcontracting with qualifying country sources. In reviewing contractor subcontracting procedures, the contracting officer shall ensure that the contract does not preclude qualifying country sources from competing for subcontracts, except when restricted by national security interest reasons, mobilization base considerations, or applicable U.S. laws or regulations (see the clause at 252.225-7002, Qualifying Country Sources as Subcontractors).

225.873 Waiver of United Kingdom commercial exploitation levies.
225.873-1 Policy
e that the contract does not preclude qualifying country sources from competing for subcontracts, except when restricted by national security interest reasons, mobilization base considerations, or applicable U.S. laws or regulations (see the clause at 252.225-7002, Qualifying Country Sources as Subcontractors).

225.873 Waiver of United Kingdom commercial exploitation levies.
225.873-1 Policy. DoD and the Government of the United Kingdom (U.K.) have agreed to waive U.K. commercial exploitation levies and U.S. nonrecurring cost recoupment charges on a reciprocal basis. For U.K. levies to be waived, the offeror or contractor shall identify the levies and the contracting officer shall request a waiver before award of the contract or subcontract under which the levies are charged.

225.873-2 Procedures. (a) The Government of the U.K. shall approve waiver of U.K. levies. When an offeror or contractor identifies a levy included in an offered or contract price, the contracting officer shall provide written notification to the Defense Security Cooperation Agency, ATTN: PSD-PMD, 1111 Jefferson Davis Highway, Arlington, VA 22202-4306, telephone (703) 601-3864. The Defense Security Cooperation Agency will request a waiver of the levy from the Government of the U.K. The notification shall include—
(1) Name of the U.K. firm;
(2) Prime contract number;
(3) Description of item for which waiver is being sought;
(4) Quantity being acquired; and
(5) Amount of levy.
PMD, 1111 Jefferson Davis Highway, Arlington, VA 22202-4306, telephone (703) 601-3864. The Defense Security Cooperation Agency will request a waiver of the levy from the Government of the U.K. The notification shall include—
(1) Name of the U.K. firm;
(2) Prime contract number;
(3) Description of item for which waiver is being sought;
(4) Quantity being acquired; and
(5) Amount of levy.
(b) Waiver may occur after contract award. If levies are waived before contract award, evaluate the offer without the levy. If levies are identified but not waived before contract award, evaluate the offer inclusive of the levies.

19. Subpart 225.9 is revised to read as follows:
Subpart 225.9—Customs and Duties
Sec. 225.901 Policy. 225.902 Procedures. 225.903 Exempted supplies. 225.901 Policy. Unless the supplies are entitled to duty-free treatment under a special category in the Harmonized Tariff Schedule of the United States ( e.g. , the Caribbean Basin Economic Recovery Act or NAFTA), or unless the supplies already have entered into the customs territory of the United States and the contractor already has paid the duty, DoD will issue duty-free entry certificates for—
(1) Qualifying country supplies (end products and components);
(2) Eligible products (end products but not components) under contracts subject to the Trade Agreements Act or NAFTA; and
(3) Other foreign supplies for which the contractor estimates that duty will exceed $200 per unit (end product or component).

225.902 Procedures. (1) Formal entry and release.
free entry certificates for—
(1) Qualifying country supplies (end products and components);
(2) Eligible products (end products but not components) under contracts subject to the Trade Agreements Act or NAFTA; and
(3) Other foreign supplies for which the contractor estimates that duty will exceed $200 per unit (end product or component).

225.902 Procedures. (1) Formal entry and release.
(i) The administrative contracting officer shall—
(A) Ensure that contractors are aware of and understand any Duty-Free Entry clause requirements. Contractors should understand that failure by them or their subcontractors to provide the data required by the clause will result in treatment of the shipment as without benefit of free entry under Section XXII, Chapter 98, Subchapter VIII, Item 9808.00.30 of the Harmonized Tariff Schedule of the United States.
(B) Upon receipt of the required notice of purchase of foreign supplies from the contractor or any tier subcontractor—
( 1 ) Verify the duty-free entitlement of supplies entering under the contract; and
( 2 ) Review the prime contract to ensure that performance of the contract requires the foreign supplies (quantity and price) identified in the notice.
(C) Within 20 days after receiving the notification of purchase of foreign supplies, forward the following information in the format indicated to the Commander, DCMA New York, ATTN: Customs Team, DCMAE-GNTF, 207 New York Avenue, Building 120, Staten Island, NY 10305-5013:
We have received a contractor notification of the purchase of foreign supplies. I have verified that foreign supplies are required for the performance of the contract
tification of purchase of foreign supplies, forward the following information in the format indicated to the Commander, DCMA New York, ATTN: Customs Team, DCMAE-GNTF, 207 New York Avenue, Building 120, Staten Island, NY 10305-5013:
We have received a contractor notification of the purchase of foreign supplies. I have verified that foreign supplies are required for the performance of the contract.
Prime Contractor Name and Address: Prime Contractor CAGE Code: Prime Contract Number plus Delivery Order Number, if applicable: Total Dollar Value of the Prime Contract or Delivery Order: Expiration Date of the Prime Contract or Delivery Order: Foreign Supplier Name and Address: Number of Subcontract/Purchase Order for Foreign Supplies: Total Dollar Value of the Subcontract for Foreign Supplies: Expiration Date of the Subcontract for Foreign Supplies: CAO Activity Address Number: ACO Name and Telephone Number: ACO Code: Signature: Title: (D) If a contract modification results in a change to any data verifying duty-free entitlement previously furnished, forward a revised notification including the changed data to DCMA New York.
(ii) The Customs Team, DCMAE-GNTF, DCMA New York—
(A) Is responsible for issuing duty-free entry certificates for foreign supplies purchased under a DoD contract or subcontract; and
(B) Upon receipt of import documentation for incoming shipments from the contractor, its agent, or the U.S. Customs Service, will verify the duty-free entitlement and execute the duty-free entry certificate.
(iii) Upon arrival of foreign supplies at ports of entry, the consignee, generally the contractor or its agent (import broker) for shipments to other than a military installation, will file U.S. Customs Form 7501, 7501A, or 7506, with the District Director of Customs.
(2) Immediate entry and release. Importations made in the name of a DoD military facility or shipped directly to a military facility are entitled to release under the immediate delivery procedure.
nee, generally the contractor or its agent (import broker) for shipments to other than a military installation, will file U.S. Customs Form 7501, 7501A, or 7506, with the District Director of Customs.
(2) Immediate entry and release. Importations made in the name of a DoD military facility or shipped directly to a military facility are entitled to release under the immediate delivery procedure.
(i) A DoD immediate delivery application has been approved and is on file at Customs Headquarters.
(ii) The application is for an indefinite period and is good for all Customs districts, areas, and ports.

225.903 Exempted supplies. (b)(i) The term “supplies”—
(A) Includes—
( 1 ) Articles known as “stores,” such as food, medicines, and toiletries; and
( 2 ) All consumable articles necessary and appropriate for the propulsion, operation, and maintenance of the vessel or aircraft, such as fuel, oil, gasoline, grease, paint, cleansing compounds, solvents, wiping rags, and polishes; and
(B) Does not include portable articles necessary and appropriate for the navigation, operation, or maintenance of the vessel or aircraft and for the comfort and safety of the persons on board, such as rope, bolts and nuts, bedding, china and cutlery, which are included in the term “equipment.”
(ii) The duty-free certificate shall be printed, stamped, or typed on the face of, or attached to, Customs Form 7501. A duly designated officer or civilian official of the appropriate department or agency shall execute the certificate in the following form:
(Date) I certify that the acquisition of this material constituted a purchase of supplies by the United States for vessels or aircraft operated by the United States, and is admissible free of duty pursuant to 19 U.S.C. 1309.
(Name) (Title) (Organization) 20. Subpart 225.11 is revised to read as follows:
Subpart 225.11—Solicitation Provisions and Contract Clauses
Sec. 225.1100 Scope of subpart. 225.1101 Acquisition of supplies. 225.1103 Other provisions and clauses
ase of supplies by the United States for vessels or aircraft operated by the United States, and is admissible free of duty pursuant to 19 U.S.C. 1309.
(Name) (Title) (Organization) 20. Subpart 225.11 is revised to read as follows:
Subpart 225.11—Solicitation Provisions and Contract Clauses
Sec. 225.1100 Scope of subpart. 225.1101 Acquisition of supplies. 225.1103 Other provisions and clauses.
225.1100 Scope of subpart. This subpart prescribes the clauses that implement subparts 225.1 through 225.10. The clauses that implement subparts 225.70 through 225.75 are prescribed within those subparts.

225.1101 Acquisition of supplies. (1) Use the provision at 252.225-7000, Buy American Act—Balance of Payments Program Certificate, instead of the provision at FAR 52.225-2, Buy American Act Certificate. Use the provision in any solicitation that includes the clause at 252.225-7001, Buy American Act and Balance of Payments Program.
(2) Use the clause at 252.225-7001, Buy American Act and Balance of Payments Program, instead of the clause at FAR 52.225-1, Buy American Act—Supplies, in solicitations and contracts unless—
(i) All line items will be acquired from a particular source or sources under the authority of FAR 6.302-3;
(ii) All line items must be domestic or qualifying country end products in accordance with subpart 225.70. (However, the clause may still be required if subpart 225.70 requires manufacture of the end product in the United States or in the United States or Canada, without a corresponding requirement for use of domestic components);
(iii) An exception to the Buy American Act or Balance of Payments Program applies; or
(iv) One or both of the following clauses will apply to all line items in the contract:
(A) 252.225-7021, Trade Agreements.
(B) 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program.
t a corresponding requirement for use of domestic components);
(iii) An exception to the Buy American Act or Balance of Payments Program applies; or
(iv) One or both of the following clauses will apply to all line items in the contract:
(A) 252.225-7021, Trade Agreements.
(B) 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program.
(3) Use the clause at 252.225-7002, Qualifying Country Sources as Subcontractors, in solicitations and contracts that include one of the following clauses:
(i) 252.225-7001, Buy American Act and Balance of Payments Program.
(ii) 252.225-7021, Trade Agreements.
(iii) 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program.
(4) Use the clause at 252.225-7013, Duty-Free Entry, instead of the clause at FAR 52.225-10. Do not use the clause for acquisitions of supplies for exclusive use outside the United States.
(5) Use the provision at 252.225-7020, Trade Agreements Certificate, instead of the provision at FAR 52.225-6, Trade Agreements Certificate, in solicitations that include the clause at 252.225-7021, Trade Agreements.
(6)(i) Use the clause at 252.225-7021, Trade Agreements, instead of the clause at FAR 52.225-5, Trade Agreements, when the Trade Agreements Act applies.
(ii) Do not use the clause if purchase from foreign sources is restricted, unless the contracting officer anticipates a waiver of the restriction.
(iii) The acquisition of eligible and noneligible products under the same contract may result in the application of trade agreements to only some of the items acquired. In such case, indicate in the Schedule those items covered by the Trade Agreements clause.
(7) Use the provision at 252.225-7032, Waiver of United Kingdom Levies—Evaluation of Offers, in solicitations and contracts if a U.K. firm is expected to—
tion of eligible and noneligible products under the same contract may result in the application of trade agreements to only some of the items acquired. In such case, indicate in the Schedule those items covered by the Trade Agreements clause.
(7) Use the provision at 252.225-7032, Waiver of United Kingdom Levies—Evaluation of Offers, in solicitations and contracts if a U.K. firm is expected to—
(i) Submit an offer; or
(ii) Receive a subcontract exceeding $1 million.
(8) Use the clause at 252.225-7033, Waiver of United Kingdom Levies, in solicitations and contracts if a U.K. firm is expected to—
(i) Submit an offer; or
(ii) Receive a subcontract exceeding $1 million.
(9) Use the provision at 252.225-7035, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program Certificate, instead of the provision at FAR 52.225-4, Buy American Act—North American Free Trade Agreement—Israeli Trade Act, in solicitations that include the clause at 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program. Use the provision with its Alternate I when the clause at 252.225-7005 is used with its Alternate I.
(10)(i) Use the clause at 252.225-7036, Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program, instead of the clause at FAR 52.225-3, Buy American Act—North American Free Trade Agreement—Israeli Trade Act, in solicitations and contracts for the items listed at 225.401-70, when the estimated value equals or exceeds $25,000, but is less than $169,000, and NAFTA applies to the acquisition.
(A) Use the basic clause when the estimated value equals or exceeds $56,190.
(B) Use the clause with its Alternate I when the estimated value equals or exceeds $25,000 but is less than $56,190.
(ii) Do not use the clause if purchase from foreign sources is restricted (see 225.401(a)(2)), unless the contracting officer anticipates a waiver of the restriction.
AFTA applies to the acquisition.
(A) Use the basic clause when the estimated value equals or exceeds $56,190.
(B) Use the clause with its Alternate I when the estimated value equals or exceeds $25,000 but is less than $56,190.
(ii) Do not use the clause if purchase from foreign sources is restricted (see 225.401(a)(2)), unless the contracting officer anticipates a waiver of the restriction.
(iii) The acquisition of eligible and noneligible products under the same contract may result in the application of the North American Free Trade Agreement Implementation Act to only some of the items acquired. In such case, indicate in the Schedule those items covered by the Buy American Act—North American Free Trade Agreement Implementation Act—Balance of Payments Program clause.

225.1103 Other provisions and clauses. (1) Unless the contracting officer knows that the prospective contractor is not a domestic concern, use the clause at 252.225-7005, Identification of Expenditures in the United States, in solicitations and contracts that—
(i) Exceed the simplified acquisition threshold; and
(ii) Are for the acquisition of—
(A) Supplies for use outside the United States;
(B) Construction to be performed outside the United States; or
(C) Services to be performed primarily outside the United States.
(2) Use the provision at 252.225-7008, Disclosure of Ownership or Control by the Government of a Terrorist Country, in solicitations expected to result in contracts of $100,000 or more.
(3) Use the clause at 252.225-7009, Subcontracting with Firms Owned or Controlled by the Government of a Terrorist Country, in solicitations and contracts with a value of $100,000 or more.
(4) Unless an exception applies or a waiver has been granted in accordance with subpart 225.6, use the provision at 252.225-7031, Secondary Arab Boycott of Israel, in all solicitations.
of $100,000 or more.
(3) Use the clause at 252.225-7009, Subcontracting with Firms Owned or Controlled by the Government of a Terrorist Country, in solicitations and contracts with a value of $100,000 or more.
(4) Unless an exception applies or a waiver has been granted in accordance with subpart 225.6, use the provision at 252.225-7031, Secondary Arab Boycott of Israel, in all solicitations.
(5) Use the clause at 252.225-7041, Correspondence in English, in solicitations and contracts when contract performance will be wholly or in part in a foreign country.
(6) Use the provision at 252.225-7042, Authorization to Perform, in solicitations when contract performance will be wholly or in part in a foreign country.

225.7000 [Amended] 21. Section 225.7000 is amended as follows:
a. In paragraph (a), in the first sentence, by removing “Defense” and adding in its place “DoD”; and
b. In paragraph (b), by adding “the” before “Balance of Payments Program”.
22. Section 225.7002-3 is amended by revising paragraph (c) to read as follows:

225.7002-3 Contract clauses.
(c) Use the clause at 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools, in solicitations and contracts exceeding the simplified acquisition threshold that require delivery of hand or measuring tools.

225.7003 through 225.7023-3 [Removed] 23. Sections 225.7003 through 225.7023-3 are removed.
24. New sections 225.7003 through 225.7018-4 are added to read as follows:

225.7003 Waiver of restrictions of 10 U.S.C. 2534. (a) Where provided for elsewhere in this subpart, the restrictions on certain foreign purchases under 10 U.S.C. 2534(a) may be waived as follows:
hand or measuring tools.

225.7003 through 225.7023-3 [Removed] 23. Sections 225.7003 through 225.7023-3 are removed.
24. New sections 225.7003 through 225.7018-4 are added to read as follows:

225.7003 Waiver of restrictions of 10 U.S.C. 2534. (a) Where provided for elsewhere in this subpart, the restrictions on certain foreign purchases under 10 U.S.C. 2534(a) may be waived as follows:
(1)(i) The Under Secretary of Defense (Acquisition, Technology, and Logistics), without power of delegation, may waive a restriction for a particular item for a particular foreign country upon determination that—
(A) United States producers of the item would not be jeopardized by competition from a foreign country, and that country does not discriminate against defense items produced in the United States to a greater degree than the United States discriminates against defense items produced in that country; or
(B) Application of the restriction would impede cooperative programs entered into between DoD and a foreign country, or would impede the reciprocal
(ii) A notice of the determination to exercise the waiver authority shall be published in the Federal Register and submitted to the congressional defense committees at least 15 days before the effective date of the waiver.
(iii) The effective period of the waiver shall not exceed 1 year.
(iv) For contracts entered into prior to the effective date of a waiver, provided adequate consideration is received to modify the contract, the waiver will be applied as directed or authorized in the waiver to—
(A) Subcontracts entered into on or after the effective date of the waiver; and
(B) Options for the procurement of items that are exercised after the effective date of the waiver, if the option prices are adjusted for any reason other than the application of the waiver.
(2) The head of the contracting activity may waive a restriction on a case-by-case basis upon execution of a determination and findings that any of the following applies:
effective date of the waiver; and
(B) Options for the procurement of items that are exercised after the effective date of the waiver, if the option prices are adjusted for any reason other than the application of the waiver.
(2) The head of the contracting activity may waive a restriction on a case-by-case basis upon execution of a determination and findings that any of the following applies:
(i) The restriction would cause unreasonable delays.
(ii) Satisfactory quality items manufactured in the United States or Canada are not available.
(iii) Application of the restriction would result in the existence of only one source for the item in the United States or Canada.
(iv) Application of the restriction is not in the national security interests of the United States.
(v) Application of the restriction would adversely affect a U.S. company.
(3) A restriction is waived when it would cause unreasonable costs. The cost of an item of U.S. or Canadian origin is unreasonable if it exceeds 150 percent of the offered price, inclusive of duty, of items that are not of U.S. or Canadian origin.
(b) In accordance with the provisions of paragraphs (a)(1)(i) through (a)(1)(iii) of this section, the Under Secretary of Defense (Acquisition, Technology, and Logistics) has waived the restrictions of 10 U.S.C. 2534(a) for certain items manufactured in the United Kingdom, including air circuit breakers for naval vessels, totally enclosed lifeboats, and ball and roller bearings (see 225.7006, 225.7008, and 225.7009). This waiver applies to—
(1) Procurements under solicitations issued on or after August 4, 1998; and
efense (Acquisition, Technology, and Logistics) has waived the restrictions of 10 U.S.C. 2534(a) for certain items manufactured in the United Kingdom, including air circuit breakers for naval vessels, totally enclosed lifeboats, and ball and roller bearings (see 225.7006, 225.7008, and 225.7009). This waiver applies to—
(1) Procurements under solicitations issued on or after August 4, 1998; and
(2) Subcontracts and options under contracts entered into prior to August 4, 1998, under the conditions described in paragraph (a)(1)(iv) of this section.

225.7004 Restriction on acquisition of foreign buses.
225.7004-1 Restriction. In accordance with 10 U.S.C. 2534, do not acquire a multipassenger motor vehicle (bus) unless it is manufactured in the United States or Canada.

225.7004-2 Applicability. Apply this restriction if the buses are purchased, leased, rented, or made available under contracts for transportation services.

225.7004-3 Exceptions. This restriction does not apply in any of the following circumstances:
(a) Buses manufactured outside the United States and Canada are needed for temporary use because buses manufactured in the United States or Canada are not available to satisfy requirements that cannot be postponed. Such use may not, however, exceed the lead time required for acquisition and delivery of buses manufactured in the United States or Canada.
(b) The requirement for buses is temporary in nature. For example, to meet a special, nonrecurring requirement or a sporadic and infrequent recurring requirement, buses manufactured outside the United States and Canada may be used for temporary periods of time. Such use may not, however, exceed the period of time needed to meet the special requirement.
(c) Buses manufactured outside the United States and Canada are available at no cost to the U.S. Government.
to meet a special, nonrecurring requirement or a sporadic and infrequent recurring requirement, buses manufactured outside the United States and Canada may be used for temporary periods of time. Such use may not, however, exceed the period of time needed to meet the special requirement.
(c) Buses manufactured outside the United States and Canada are available at no cost to the U.S. Government.
(d) The acquisition is for an amount at or below the simplified acquisition threshold.

225.7004-4 Waiver. The waiver criteria at 225.7003(a) apply to this restriction.

225.7005 Restriction on certain chemical weapons antidote.
225.7005-1 Restriction. In accordance with 10 U.S.C. 2534 and defense industrial mobilization requirements (see subpart 208.72), do not acquire chemical weapons antidote contained in automatic injectors, or the components for such injectors, unless the chemical weapons antidote or component is manufactured in the United States or Canada by a company that—
(a) Is a producer under the industrial preparedness program at the time of contract award;
(b) Has received all required regulatory approvals; and
(c) Has the plant, equipment, and personnel to perform the contract in the United States or Canada at the time of contract award.

225.7005-2 Exception. This restriction does not apply if the acquisition is for an amount at or below the simplified acquisition threshold.

225.7005-3 Waiver. The waiver criteria at 225.7003(a) apply to this restriction.

225.7006 Restriction on air circuit breakers for naval vessels.
225.7006-1 Restriction. In accordance with 10 U.S.C. 2534, do not acquire air circuit breakers for naval vessels unless they are manufactured in the United States or Canada.

225.7006-2 Exceptions. This restriction does not apply if the acquisition is—
(a) For an amount at or below the simplified acquisition threshold; or
225.7006 Restriction on air circuit breakers for naval vessels.
225.7006-1 Restriction. In accordance with 10 U.S.C. 2534, do not acquire air circuit breakers for naval vessels unless they are manufactured in the United States or Canada.

225.7006-2 Exceptions. This restriction does not apply if the acquisition is—
(a) For an amount at or below the simplified acquisition threshold; or
(b) For spare or repair parts needed to support air circuit breakers manufactured outside the United States. Support includes the purchase of spare air circuit breakers when those from alternate sources are not interchangeable.

225.7006-3 Waiver. (a) The waiver criteria at 225.7003(a) apply to this restriction.
(b) The Under Secretary of Defense (Acquisition, Technology, and Logistics) has waived the restriction for air circuit breakers manufactured in the United Kingdom. See 225.7003(b) for applicability.

225.7006-4 Solicitation provision and contract clause. (a) Use the provision at 252.225-7037, Evaluation of Offers for Air Circuit Breakers, in solicitations requiring air circuit breakers for naval vessels unless—
(1) An exception applies; or
(2) A waiver has been granted, other than the waiver for the United Kingdom, which has been incorporated into the provision.
(b) Use the clause at 252.225-7038, Restriction on Acquisition of Air Circuit Breakers, in solicitations and contracts requiring air circuit breakers for naval vessels unless—
(1) An exception applies; or
(2) A waiver has been granted, other than the waiver for the United Kingdom,

225.7007 Restrictions on anchor and mooring chain.
225.7007-1 Restrictions. (a) In accordance with section 8041 of the Fiscal Year 1991 DoD Appropriations Act (Public Law 101-511) and similar sections in subsequent DoD appropriations acts, do not acquire welded shipboard anchor and mooring chain, four inches or less in diameter, unless'
granted, other than the waiver for the United Kingdom,

225.7007 Restrictions on anchor and mooring chain.
225.7007-1 Restrictions. (a) In accordance with section 8041 of the Fiscal Year 1991 DoD Appropriations Act (Public Law 101-511) and similar sections in subsequent DoD appropriations acts, do not acquire welded shipboard anchor and mooring chain, four inches or less in diameter, unless'
(1) It is manufactured in the United States, including cutting, heat treating, quality control, testing, and welding (both forging and shot blasting process); and
(2) The cost of the components manufactured in the United States exceeds 50 percent of the total cost of components.
(b) 10 U.S.C. 2534 also restricts acquisition of welded shipboard anchor and mooring chain, four inches or less in diameter, when used as a component of a naval vessel. However, the Appropriations Act restriction described in paragraph (a) of this subsection takes precedence over the restriction of 10 U.S.C. 2534.

225.7007-2 Waiver. (a) The Secretary of the department responsible for acquisition may waive the restriction in 225.7007-1(a), on a case-by-case basis, if—
(1) Sufficient domestic suppliers are not available to meet DoD requirements on a timely basis; and
(2) The acquisition is necessary to acquire capability for national security purposes.
(b) Document the waiver in a written determination and findings containing—
(1) The factors supporting the waiver; and
(2) A certification that the acquisition must be made in order to acquire capability for national security purposes.
rs are not available to meet DoD requirements on a timely basis; and
(2) The acquisition is necessary to acquire capability for national security purposes.
(b) Document the waiver in a written determination and findings containing—
(1) The factors supporting the waiver; and
(2) A certification that the acquisition must be made in order to acquire capability for national security purposes.
(c) Provide a copy of the determination and findings to the House and Senate Committees on Appropriations.

225.7007-3 Contract clause. Unless a waiver has been granted, use the clause at 252.225-7019, Restriction on Acquisition of Anchor and Mooring Chain, in solicitations and contracts requiring welded shipboard anchor or mooring chain four inches or less in diameter.

225.7008 Restrictions on totally enclosed lifeboat survival systems.
225.7008-1 Restrictions. (a) In accordance with section 8124 of the Fiscal Year 1994 DoD Appropriations Act (Public Law 103-139) and section 8093 of the Fiscal Year 1995 DoD Appropriations Act (Public Law 103-335), do not purchase a totally enclosed lifeboat survival system, which consists of the lifeboat and associated davits and winches, unless—
(1) 50 percent or more of the components are manufactured in the United States; and
(2) 50 percent or more of the labor in the final manufacture and assembly of the entire system is performed in the United States.
(b) In accordance with 10 U.S.C. 2534(a), do not purchase a totally enclosed lifeboat that is a component of a naval vessel unless it is manufactured in the United States or Canada.
(1) 10 U.S.C. 2534(h) prohibits the use of a contract clause or certification to implement this restriction.
(2) Implement this restriction through management and oversight techniques that achieve the objective of the restriction without imposing a significant management burden on the Government or the contractor.

225.7008-2 Exceptions. The restriction in 225.7008-1(b) does not apply if the acquisition is—
34(h) prohibits the use of a contract clause or certification to implement this restriction.
(2) Implement this restriction through management and oversight techniques that achieve the objective of the restriction without imposing a significant management burden on the Government or the contractor.

225.7008-2 Exceptions. The restriction in 225.7008-1(b) does not apply if the acquisition is—
(a) For an amount at or below the simplified acquisition threshold; or
(b) For spare or repair parts needed to support totally enclosed lifeboats manufactured outside the United States.

225.7008-3 Waiver. (a) The waiver criteria at 225.7003(a) apply to the restriction of 225.7008-1(b).
(b) The Under Secretary of Defense (Acquisition, Technology, and Logistics) has waived the restriction of 225.7008-1(b) for totally enclosed lifeboats manufactured in the United Kingdom. See 225.7003(b) for applicability.

225.7008-4 Contract clause. Use the clause at 252.225-7039, Restriction on Acquisition of Totally Enclosed Lifeboat Survival Systems, in solicitations and contracts that require delivery of totally enclosed lifeboat survival systems.

225.7009 Restrictions on ball and roller bearings.
225.7009-1 Restrictions. (a) In accordance with 10 U.S.C. 2534, through fiscal year 2005, do not acquire ball and roller bearings or bearing components unless they are manufactured in the United States or Canada.
(b) In accordance with section 8099 of the DoD Appropriations Act for Fiscal Year 1996 (Public Law 104-61) and similar sections in subsequent DoD appropriations acts, do not acquire ball and roller bearings unless the bearings and bearing components are manufactured in the United States or Canada.

225.7009-2 Exceptions. (a) The restriction in 225.7009-1(a) does not apply to—
(1) Acquisitions using simplified acquisition procedures, unless ball or roller bearings or bearing components are the end items being purchased;
(2) Commercial items incorporating ball or roller bearings;
oller bearings unless the bearings and bearing components are manufactured in the United States or Canada.

225.7009-2 Exceptions. (a) The restriction in 225.7009-1(a) does not apply to—
(1) Acquisitions using simplified acquisition procedures, unless ball or roller bearings or bearing components are the end items being purchased;
(2) Commercial items incorporating ball or roller bearings;
(3) Miniature and instrument ball bearings needed to meet urgent military requirements;
(4) Items acquired overseas for use overseas; or
(5) Ball and roller bearings or bearing components, or items containing bearings, for use in a cooperative or co-production project under an international agreement. This exception does not apply to miniature and instrument ball bearings.
(b) The restriction in 225.7009-1(b) does not apply to contracts or subcontracts for the acquisition of commercial items, except for commercial ball and roller bearings acquired as end items.

225.7009-3 Waiver. (a)(1) The waiver criteria at 225.7003(a)(1) apply to the restriction of 225.7009-1(a).
(2) The Under Secretary of Defense (Acquisition, Technology, and Logistics) has waived the restriction of 225.7009-1(a) for ball and roller bearings manufactured in the United Kingdom. See 225.7003(b) for applicability.
(b) The head of the contracting activity may waive the restriction in 225.7009-1(a)—
(1) Upon execution of a determination and findings that—
e restriction of 225.7009-1(a).
(2) The Under Secretary of Defense (Acquisition, Technology, and Logistics) has waived the restriction of 225.7009-1(a) for ball and roller bearings manufactured in the United Kingdom. See 225.7003(b) for applicability.
(b) The head of the contracting activity may waive the restriction in 225.7009-1(a)—
(1) Upon execution of a determination and findings that—
(i) No domestic (U.S. or Canadian) bearing manufacturer meets the requirement;
(ii) It is not in the best interests of the United States to qualify a domestic bearing to replace a qualified nondomestic bearing.
(A) This determination shall be based on a finding that the qualification of a domestically manufactured bearing would cause unreasonable costs or delay.
(B) A finding that a cost is unreasonable should take into
(C) Contracts should be awarded to domestic bearing manufacturers to increase their capability to reinvest and become more competitive;
(iii) Application of the restriction would result in the existence of only one source for the item in the United States or Canada;
(iv) Application of the restriction is not in the national security interests of the United States; or
(v) Application of the restriction would adversely affect a U.S. company.
(2) If the acquisition is for an amount less than the simplified acquisition threshold and simplified acquisition procedures are being used.
(3) For multiyear contracts or contracts exceeding 12 months, except those for miniature and instrument ball bearings, if—
he national security interests of the United States; or
(v) Application of the restriction would adversely affect a U.S. company.
(2) If the acquisition is for an amount less than the simplified acquisition threshold and simplified acquisition procedures are being used.
(3) For multiyear contracts or contracts exceeding 12 months, except those for miniature and instrument ball bearings, if—
(i) The head of the contracting activity executes a determination and findings in accordance with paragraph (b)(1) of this subsection;
(ii) The contractor submits a written plan for transitioning from the use of nondomestic to domestically manufactured bearings;
(iii) The contractor's written plan—
(A) States whether a domestically manufactured bearing can be qualified, at a reasonable cost, for use during the course of the contract period;
(B) Identifies any bearings that are not domestically manufactured, their application, and source of supply; and
(C) Describes, including cost and timetable, the transition to a domestically manufactured bearing (The timetable for the transition should normally take no longer than 24 months from the date the waiver is granted); and
(iv) The contracting officer accepts the contractor's plan and incorporates it into the contract.
(4) For miniature and instrument ball bearings, only if the contractor agrees to acquire a like quantity and type of domestic manufacture for nongovernmental use.
ured bearing (The timetable for the transition should normally take no longer than 24 months from the date the waiver is granted); and
(iv) The contracting officer accepts the contractor's plan and incorporates it into the contract.
(4) For miniature and instrument ball bearings, only if the contractor agrees to acquire a like quantity and type of domestic manufacture for nongovernmental use.
(c) The Secretary of the department responsible for acquisition may waive the restriction in 225.7009-1(b), on a case-by-case basis, by certifying to the House and Senate Committees on Appropriations that—
(1) Adequate domestic supplies are not available to meet DoD requirements on a timely basis; and
(2) The acquisition must be made in order to acquire capability for national security purposes.

225.7009-4 Contract clause. (a) Use the clause at 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings, in solicitations and contracts, unless—
(1) The items being acquired do not contain ball and roller bearings; or
(2) An exception applies or a waiver has been granted, other than the waiver for the United Kingdom, which has been incorporated into the clause.
(b) Use the clause with its Alternate I in solicitations and contracts that use simplified acquisition procedures.

225.7010 Restriction on vessel propellers.
225.7010-1 Restriction. In accordance with section 8064 of the National Defense Appropriations Act for Fiscal Year 2001 (Public Law 106-259), do not use fiscal year 2000 or 2001 funds to acquire vessel propellers other than those produced by a domestic source and of domestic origin, i.e. , vessel propellers—
(a) Manufactured in the United States or Canada; and
estriction on vessel propellers.
225.7010-1 Restriction. In accordance with section 8064 of the National Defense Appropriations Act for Fiscal Year 2001 (Public Law 106-259), do not use fiscal year 2000 or 2001 funds to acquire vessel propellers other than those produced by a domestic source and of domestic origin, i.e. , vessel propellers—
(a) Manufactured in the United States or Canada; and
(b) For which all component castings were poured and finished in the United States or Canada.

225.7010-2 Exceptions. This restriction does not apply to contracts or subcontracts for acquisition of commercial items.

225.7010-3 Waiver. The Secretary of the department responsible for acquisition may waive this restriction on a case-by-case basis, by certifying to the House and Senate Committees on Appropriations that—
(a) Adequate domestic supplies are not available to meet DoD requirements on a timely basis; and
(b) The acquisition must be made in order to acquire capability for national security purposes.

225.7010-4 Contract clause. Use the clause at 252.225-7023, Restriction on Acquisition of Vessel Propellers, in solicitations and contracts that use fiscal year 2000 or 2001 funds for the acquisition of vessels or vessel propellers, unless—
(a) An exception applies or a waiver has been granted; or
(b) The vessels being acquired do not contain vessel propellers.

225.7011 Restriction on carbon, alloy, and armor steel plate.
225.7011-1 Restriction. In accordance with section 8111 of the Fiscal Year 1992 DoD Appropriations Act (Public Law 102-172) and similar sections in subsequent DoD appropriations acts, do not acquire any of the following types of carbon, alloy, or armor steel plate unless it is melted and rolled in the United States or Canada:
(a) Carbon, alloy, or armor steel plate in Federal Supply Class 9515.
225.7011-1 Restriction. In accordance with section 8111 of the Fiscal Year 1992 DoD Appropriations Act (Public Law 102-172) and similar sections in subsequent DoD appropriations acts, do not acquire any of the following types of carbon, alloy, or armor steel plate unless it is melted and rolled in the United States or Canada:
(a) Carbon, alloy, or armor steel plate in Federal Supply Class 9515.
(b) Carbon, alloy, or armor steel plate described by specifications of the American Society for Testing Materials or the American Iron and Steel Institute.

225.7011-2 Waiver. The Secretary of the department responsible for acquisition may waive this restriction, on a case-by-case basis, by certifying to the House and Senate Committees on Appropriations that—
(a) Adequate U.S. or Canadian supplies are not available to meet DoD requirements on a timely basis; and
(b) The acquisition must be made in order to acquire capability for national security purposes.

225.7011-3 Contract clause. Unless a waiver has been granted, use the clause at 252.225-7030, Restriction on Acquisition of Carbon, Alloy, and Armor Steel Plate, in solicitations and contracts that—
(a) Require the delivery to the Government of carbon, alloy, or armor steel plate that will be used in a facility owned by the Government or under the control of DoD; or
(b) Require contractors operating in a Government-owned facility or a facility under the control of DoD to purchase carbon, alloy, or armor steel plate.

225.7012 Restriction on supercomputers.
225.7012-1 Restriction. In accordance with section 8112 of Public Law 100-202, and similar sections in subsequent DoD appropriations acts, do not purchase a supercomputer unless it is manufactured in the United States.

225.7012-2 Waiver. The Secretary of Defense may waive this restriction, on a case-by-case basis, after certifying to the Armed Services and Appropriations Committees of Congress that—
2-1 Restriction. In accordance with section 8112 of Public Law 100-202, and similar sections in subsequent DoD appropriations acts, do not purchase a supercomputer unless it is manufactured in the United States.

225.7012-2 Waiver. The Secretary of Defense may waive this restriction, on a case-by-case basis, after certifying to the Armed Services and Appropriations Committees of Congress that—
(a) Adequate U.S. supplies are not available to meet requirements on a timely basis; and
(b) The acquisition must be made in order to acquire capability for national security purposes.

225.7012-3 Contract clause. Unless a waiver has been granted, use the clause at 252.225-7011, Restriction on Acquisition of Supercomputers, in solicitations and contracts for the acquisition of supercomputers.

225.7013 Restrictions on construction or repair of vessels in foreign shipyards. In accordance with 10 U.S.C. 7309—
(a) Do not award a contract to construct in a foreign shipyard—
(1) A vessel for any of the armed forces; or
(2) A major component of the hull or superstructure of a vessel for any of the armed forces; and
(b) Do not overhaul, repair, or maintain in a foreign shipyard, a naval vessel (or any other vessel under the jurisdiction of the Secretary of the Navy) homeported in the United States. This restriction does not apply to voyage repairs.

225.7014 Restriction on overseas military construction. For restriction on award of military construction contracts to be performed in the United States territories and possessions in the Pacific and on Kwajalein Atoll, or in countries bordering the Arabian Gulf, see 236.274(a).

225.7015 Restriction on overseas architect-engineer services. For restriction on award of architect-engineer contracts to be performed in Japan, in any North Atlantic Treaty Organization member country, or in countries bordering the Arabian Gulf, see 236.602-70.

225.7016 Restriction on research and development
on Kwajalein Atoll, or in countries bordering the Arabian Gulf, see 236.274(a).

225.7015 Restriction on overseas architect-engineer services. For restriction on award of architect-engineer contracts to be performed in Japan, in any North Atlantic Treaty Organization member country, or in countries bordering the Arabian Gulf, see 236.602-70.

225.7016 Restriction on research and development. (a) In accordance with Public Law 92-570, do not use DoD appropriations to make an award to any foreign corporation, organization, person, or entity, for research and development in connection with any weapon system or other military equipment, if there is a U.S. corporation, organization, person, or entity—
(1) Equally competent; and
(2) Willing to perform at a lower cost.
(b) This restriction does not affect the requirements of FAR part 35 for selection of research and development contractors. However, when a U.S. source and a foreign source are equally competent, award to the source that will provide the services at the lower cost.

225.7017 Restriction on Ballistic Missile Defense research, development, test, and evaluation.
225.7017-1 Definitions. Competent,” “foreign firm,” and “U.S. firm” are defined in the provision at 252.225-7018, Notice of Prohibition of Certain Contracts with Foreign Entities for the Conduct of Ballistic Missile Defense Research, Development, Test, and Evaluation.

225.7017-2 Restriction. In accordance with section 222 of the DoD Authorization Act for Fiscal Years 1988 and 1989 (Public Law 100-180), do not use any funds appropriated to or for the use of DoD to enter into or carry out a contract with a foreign government or firm, including any contract awarded as a result of a broad agency announcement, if the contract provides for the conduct of research, development, test, and evaluation (RDT&E) in connection with the Ballistic Missile Defense Program.

225.7017-3 Exceptions. This restriction does not apply—
appropriated to or for the use of DoD to enter into or carry out a contract with a foreign government or firm, including any contract awarded as a result of a broad agency announcement, if the contract provides for the conduct of research, development, test, and evaluation (RDT&E) in connection with the Ballistic Missile Defense Program.

225.7017-3 Exceptions. This restriction does not apply—
(a) To contracts awarded to a foreign government or firm if the contracting officer determines that—
(1) The contract will be performed within the United States;
(2) The contract is exclusively for RDT&E in connection with antitactical ballistic missile systems; or
(3) The foreign government or firm agrees to share a substantial portion of the total contract cost. Consider the foreign share as substantial if it is equitable with respect to the relative benefits that the United States and the foreign parties will derive from the contract. For example, if the contract is more beneficial to the foreign party, its share of the cost should be correspondingly higher; or
(b) If the head of the contracting activity certifies in writing, before contract award, that a U.S. firm cannot competently perform a contract for RDT&E at a price equal to or less than the price at which a foreign government or firm would perform the RDT&E. The contracting officer or source selection authority, as applicable, shall make a determination that will be the basis for the certification.
(1) The determination shall—
(i) Describe the contract effort;
(ii) State the number of proposals solicited and received from both U.S. and foreign firms;
(iii) Identify the proposed awardee and the amount of the contract;
(iv) State that selection of the contractor was based on the evaluation factors contained in the solicitation, or the criteria contained in the broad agency announcement; and
e determination shall—
(i) Describe the contract effort;
(ii) State the number of proposals solicited and received from both U.S. and foreign firms;
(iii) Identify the proposed awardee and the amount of the contract;
(iv) State that selection of the contractor was based on the evaluation factors contained in the solicitation, or the criteria contained in the broad agency announcement; and
(v) State that a U.S. firm cannot competently perform the effort at a price equal to, or less than, the price at which the foreign awardee would perform it.
(2) When either a broad agency announcement or program research and development announcement is used, or when the determination is otherwise not based on direct competition between foreign and domestic proposals, the determination shall not be merely conclusory.
(i) The determination shall specifically explain its basis, include a description of the method used to determine the competency of U.S. firms, and describe the cost or price analysis performed.
(ii) Alternately, the determination may contain—
(A) A finding, including the basis for such finding, that the proposal was submitted solely in response to the terms of a broad agency announcement, program research and development announcement, or other solicitation document without any technical guidance from the program office; and
(B) A finding, including the basis for such finding, that disclosure of the information in the proposal for the purpose of conducting a competitive acquisition is prohibited.
oposal was submitted solely in response to the terms of a broad agency announcement, program research and development announcement, or other solicitation document without any technical guidance from the program office; and
(B) A finding, including the basis for such finding, that disclosure of the information in the proposal for the purpose of conducting a competitive acquisition is prohibited.
(3) Within 30 days after contract award, forward a copy of the certification and supporting documentation to the Ballistic Missile Defense Organization, ATTN: BMDO/DRI, 7100 Defense Pentagon, Washington, DC 20301-7100.

225.7017-4 Solicitation provision. Unless foreign participation is otherwise excluded, use the provision at 252.225-7018, Notice of Prohibition of Certain Contracts With Foreign Entities for the Conduct of Ballistic Missile Defense Research, Development, Test, and Evaluation, in competitively negotiated solicitations for RDT&E in connection with the Ballistic Missile Defense Program.

225.7018 Restriction on access to proscribed information.
225.7018-1 Definitions. “Entity controlle

[Text truncated at 120,000 characters. The full text is on the page linked above.]

## Nearby sections

- [67 FR 25 Fees for Official Inspection and Official Weighing Services](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_01-32154.md)
- [67 FR 33 Airworthiness Directives; Dassault Model Mystere-Falcon 50 Series Airplanes](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_01-32194.md)
- [67 FR 534 Airworthiness Directives; McDonnell Douglas MD-90-30 Series Airplanes](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-202.md)
- [67 FR 542 Airworthiness Directives; McDonnell Douglas Model MD-90-30 Series Airplanes](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-206.md)
- [67 FR 544 Airworthiness Directives; Boeing Model 747-100, -100B, -100B SUD, -200B, -200C, -200F, -300, -400, -400D, and -400F Series Airplanes; and Model 747SR Series Airplanes](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-207.md)
- [67 FR 550 Airworthiness Directives; McDonnell Douglas Model DC-10-10, -10F, -15, -30, -30F (KC-10A and KDC-10), -40, and -40F Series Airplanes; and Model MD-10-10F and MD-10-30F Series Airplanes](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-209.md)
- [67 FR 632 Federal Acquisition Regulation; Hazardous Material Safety Data](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-117.md)
- [67 FR 700 Airworthiness Directives; Pratt & Whitney JT8D-200 Series Turbofan Engines](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-304.md)
- [67 FR 704 Proposed Modification of Class E Airspace; Manistee, MI](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-251.md)
- [67 FR 713 Automotive Fuel Economy Manufacturing Incentives for Alternative Fuel Vehicles](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_01-32260.md)
- [67 FR 849 Honey Research, Promotion, and Consumer Information Order; Continuance Referendum](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-449.md)
- [67 FR 1167 Airworthiness Directives; Boeing Model 747 Series Airplanes Powered by General Electric (GE) CF6-45/50, Pratt & Whitney (P&W) JT9D-70, or JT9D-7 Series Engines](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-457.md)
- [67 FR 1325 Groundfish Fisheries of the Bering Sea and Aleutian Islands Area and the Gulf of Alaska, King and Tanner Crab Fisheries in the Bering Sea/Aleutian Islands, Scallop and Salmon Fisheries Off the Coast of Alaska](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-644.md)
- [67 FR 1421 Disclosure of Returns and Return Information by Other Agencies; Correction](https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-660.md)

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/statutes/FR_PRORULE_02-24739. Check the current official text before relying on it. Not legal advice.