# 15 C.F.R. § 241.5 (2026): Standard dimensions

> Federal · Regulations · In force

URL: https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_5

## Section

- **Citation:** 15 C.F.R. § 241.5 (2026)
- **Heading:** Standard dimensions
- **Jurisdiction:** Federal
- **Kind:** Regulations
- **Status:** In force
- **Text as of:** August 14, 2026
- **Source:** Compiled text
- **Location:** Title 15 CFR: Commerce and Foreign Trade / Chapter II: NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE / Part 241: BARRELS FOR FRUITS, VEGETABLES AND OTHER DRY COMMODITIES, AND FOR CRANBERRIES / § 241.5: § 241.5   Standard dimensions.

## Text

Whenever in the rules and regulations in this part the error on a dimension is mentioned, this error shall be determined by taking the difference between the actual measured dimension and the standard dimension. The error is an error in excess and is to be preceded by a plus sign when the measured dimension is greater than the standard dimension. The error is an error in deficiency and is to be preceded by a minus sign when the measured dimension is less than the standard dimension.
(a) The standard dimensions of a barrel for fruits, vegetables, and other dry commodities other than cranberries, and of a barrel for cranberries, with which the actual measured dimensions are to be compared, are as follows:
Dimensions
Barrel for fruits, vegetables, and other dry commodities other than cranberries (inches)
Barrel for cranberries (inches)
Diameter of head
17
1
⁄
8
16
1
⁄
4
Effective diameter of head (see § 241.4)
16
3
⁄
4
15
7
⁄
8
Distance between heads
26
25
1
⁄
4
Circumference of bulge, outside measurement
64
58
1
⁄
2
Length of stave
28
1
⁄
2
28
1
⁄
2
(b) In the case of all subdivisions of the barrel for fruits, vegetables, and other dry commodities other than cranberries, and all subdivisions of the barrel for cranberries, the following dimensions are hereby standardized for the purpose of the application of tolerances, and the actual measured dimensions are to be compared with these:
Subdivisions of Barrel for Fruits, Vegetables, and Other Dry Commodities Other Than Cranberries
Dimensions
3
⁄
4
barrel (inches)
1
⁄
2
barrel (inches)
1
⁄
3
barrel (inches)
Effective diameter of head (see § 241.4)
15
1
⁄
4
13
3
⁄
8
11
5
⁄
8
Distance between heads
23
1
⁄
2
20
1
⁄
2
18
Circumference of bulge, outside measurement
58
1
⁄
2
51
1
⁄
2
45
1
⁄
4
Subdivisions of Barrel for Cranberries
Effective diameter of head (see § 241.4)
14
3
⁄
8
12
5
⁄
8
11
Distance between heads
23
20
17
1
⁄
2
Circumference of bulge, outside measurement
53
3
⁄
8
47
41
3
⁄
8
(Sec. 1, 38 Stat. 1186; 15 U.S.C. 234)

## Nearby sections

- [15 C.F.R. § 241.1 (2026) § 241.1   Capacities.](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_1.md)
- [15 C.F.R. § 241.2 (2026) § 241.2   Legal standard barrels.](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_2.md)
- [15 C.F.R. § 241.3 (2026) § 241.3   Application of tolerance for “distance between heads.”](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_3.md)
- [15 C.F.R. § 241.4 (2026) § 241.4   Application of tolerance for “diameter of head.”](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_4.md)
- [15 C.F.R. § 241.5 (2026) § 241.5   Standard dimensions.](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_5.md)
- [15 C.F.R. § 241.6 (2026) § 241.6   Classes of barrels for tolerance application.](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_6.md)
- [15 C.F.R. § 241.7 (2026) § 241.7   Tolerances to be allowed.](https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_7.md)

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/statutes/CFR_T15_P241_S241_5. Check the current official text before relying on it. Not legal advice.