# Hazardous Materials: Improving the Safety of Railroad Tank Car Transportation of Hazardous Materials

> Briefs, arguments, decisions, and more.

URL: https://www.frixlaw.com/law-library/documents/fr%3AE8-31056

## Record

- **Collection:** Federal Register
- **Document type:** Rule
- **Published:** January 13, 2009
- **Citation:** 74 FR 1770

## Text

DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
49 CFR Parts 171, 172, 173, 174 and 179
[Docket No. FRA-2006-25169]
RIN 2130-AB69
Hazardous Materials: Improving the Safety of Railroad Tank Car Transportation of Hazardous Materials

AGENCY:

Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT).

ACTION:

Final rule.

SUMMARY:

The Pipeline and Hazardous Materials Safety Administration (PHMSA), in coordination with the Federal Railroad Administration (FRA), is amending the Hazardous Materials Regulations to prescribe enhanced safety measures for rail transportation of poison inhalation hazard (PIH) materials, including interim design standards for railroad tank cars. Pending validation and implementation of the crashworthiness performance standard proposed in the NPRM issued under this docket on April 1, 2008, the rule mandates commodity-specific improvements in safety features and design standards for newly manufactured DOT specification tank cars. The rule also adopts a 50 mph speed restriction for loaded rail tank cars transporting PIH materials; an improved top fittings performance standard; an allowance to increase the gross weight of tank cars that meet the enhanced standards; and adoption of the industry standard for normalized steel in certain tank cars. The interim standards established in this rule will enhance the accident survivability of PIH tank cars when compared to existing regulations while providing tank car owners continued flexibility in car selection. Adoption of this interim standard will ensure the ongoing availability of tank cars while PHMSA and FRA complete research and testing on advanced tank car design to validate and implement a more stringent performance standard.

DATES:

Effective Date:
March 16, 2009. The incorporation by reference of the publication listed in the rule is approved by the Director of the Federal Register as of March 16, 2009.

Incorporation by Reference Date:
The incorporation by reference of the publications adopted in § 171.7 of this final rule has been approved by the Director of the Federal Register as of March 16, 2009.

FOR FURTHER INFORMATION CONTACT:

William Schoonover, (202) 493-6229, Office of Safety Assurance and Compliance, Federal Railroad Administration; Lucinda Henriksen, (202) 493-1345, Office of Chief Counsel, Federal Railroad Administration; or Michael Stevens, (202) 366-8553, Office of Hazardous Materials Standards, Pipeline and Hazardous Materials Safety Administration.

SUPPLEMENTARY INFORMATION:

Abbreviations and Terms Used in This Document

AAR—Association of American Railroads

ASLRRA—American Short Line and Regional Railroad Association

BNSF—BNSF Railway Company

BLET—Brotherhood of Locomotive Engineers and Trainmen

CPC—Casualty Prevention Circular

CI—Chlorine Institute

CP—Canadian Pacific

CPR—Conditional Probability of Release

CSXT—CSXT Transportation

Department—U.S. Department of Transportation

DOW—Dow Chemical Company

DOT—U.S. Department of Transportation

Federal Hazmat Law—Federal hazardous materials transportation law (49 U.S.C. 5101
et seq.
)

FRA—Federal Railroad Administration

HMR—Hazardous Materials Regulations

NGRTCP—Next Generation Rail Tank Car Project

NPRM—Notice of Proposed Rulemaking

NTSB—National Transportation Safety Board

OMB—Office of Management and Budget

PHMSA—Pipeline and Hazardous Materials Safety Administration

PIH—Poison Inhalation Hazard

R&D—Research and Development

RSAC—Railroad Safety Advisory Committee

RSI—Railway Supply Institute

SAFETEA-LU—Safe, Accountable, Flexible, Efficient, Transportation Equity Act: A Legacy for Users, Public Law 109-59

SBA—Small Business Administration

Tank Car Manual—Association of American Railroads Tank Car Committee Tank Car Manual

TCC—Association of American Railroads Tank Car Committee

TFI—The Fertilizer Institute

TIH—Toxic Inhalation Hazard

TSA—Department of Homeland Security, Transportation Security Administration

Trinity—Trinity Industries, Inc.

UTU—United Transportation Union

Union Tank—Union Tank Car Company

UP—Union Pacific Railroad Company

Volpe—Volpe National Transportation Systems Center

Table of Contents for Supplementary Information

I. Background

II. Statutory Authority, Congressional Mandate, and NTSB Recommendations

III. The Proposed Rule

IV. Discussion of Comments on the Proposed Rule

V. Discussion of Comments on Petitions for Interim Tank Car Standards

VI. Summary of Rule

VII. Section-by-Section Analysis

VIII. Regulatory Analyses and Notices

A. Statutory/Legal Authority for This Rulemaking

B. Executive Order 12866 and DOT Regulatory Policies and Procedures

C. Executive Order 13132

D. Executive Order 13175

E. Regulatory Flexibility Act and Executive Order 13272

F. Paperwork Reduction Act

G. Regulation Identifier Number (RIN)

H. Unfunded Mandates Reform Act

I. Environmental Assessment

J. Privacy Act

I. Background

On April 1, 2008, PHMSA published a notice of proposed rulemaking (NPRM) proposing revisions to the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) to improve the crashworthiness protection of railroad tank cars designed to transport materials that are poisonous, or toxic, by inhalation (referred to as PIH or TIH materials). 73 FR 17818. The NPRM proposed enhanced tank car performance standards for head and shell impacts; operational restrictions for trains hauling tank cars containing PIH materials; interim operational restrictions for trains hauling tank cars used to transport PIH materials, but not meeting the enhanced performance standards; and an allowance to increase the gross weight on rail of tank cars that meet the enhanced tank-head and shell puncture-resistance systems.

The NPRM provided detailed background information on the need to enhance the crashworthiness protection of railroad tank cars, government and industry efforts to improve the safety of hazardous materials transportation via railroad tank car, and the Department's research efforts focused on tank car safety. As we explained in the NPRM, although rail transportation of hazardous materials is a safe method for moving large quantities of hazardous materials over long distances, rail tank cars used to contain these materials have not been designed to withstand the force of high-speed derailments and collisions. In the last several years, rail tank cars have been breached in numerous accidents, resulting in large releases of hazardous materials. Of particular concern, three of these accidents involved PIH materials: (1) The January 18, 2002, derailment of a Canadian Pacific (CP) train in Minot, North Dakota which resulted in a catastrophic release of anhydrous ammonia; (2) the June 28, 2004 collision

between trains operated by Union Pacific Railroad Company (UP) Burlington Northern and Santa Fe Railway Company (now known as BNSF Railway Company) in Macdona, Texas, involving a breach of a loaded tank car containing chlorine; and (3) the January 6, 2005 collision between two Norfolk Southern Railway Company (NS) trains in Graniteville, South Carolina, also involving the catastrophic rupture of a loaded chlorine tank car. As noted in the NPRM, although none of these accidents was caused by the hazardous materials tank cars, the failure of the tank cars involved led to fatalities, injuries, evacuations, and property and environmental damage.

In response to these accidents, related NTSB recommendations, and the Congressional mandate for tank car safety improvements in the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users, Public Law 109-59 (SAFETEA-LU), PHMSA and FRA initiated a comprehensive review of design and operational factors that affect rail tank car safety. As noted in the NPRM, DOT's on-going and multi-faceted strategy to enhance the safety of rail tank cars and transportation of hazardous materials by rail tank cars utilizes a risk-based, system-wide approach that addresses: (1) Tank car design and manufacturing; (2) railroad operational issues such as human factors, track conditions and maintenance, wayside hazardous detectors, signals and train control systems; and (3) improved planning and training for emergency response.

Subsequent to publication of the NPRM, DOT hosted a two-day technical symposium on tank car crashworthiness and held a series of public meetings to solicit feedback on the NPRM. Although participants at both the technical symposium and public meetings generally agreed with DOT's goal of improving the accident survivability of tank cars, commenters expressed practical concerns regarding DOT's specific proposals.

Also subsequent to publication of the NPRM, the Association of American Railroads (AAR) renewed the effectiveness of its previously suspended interchange standard for tank cars transporting PIH materials (Casualty Prevention Circular 1187 or CPC-1187). AAR's CPC-1187 implements interchange standards for the shell, head, and top fittings of PIH tank cars. Specifically, AAR's CPC-1187 interchange standard contains tank car head and shell design standards and an alternate performance standard based on the metric AAR terms “conditional probability of release.” The head and shell requirements of CPC-1187 can be met by using DOT specification tank cars of higher tank classes than required by DOT standards; however, tank cars built to meet the CPC-1187 standard would not meet the standards DOT proposed in the NPRM. CPC-1187 also requires tank cars used to transport PIH materials be equipped with top fittings protection systems designed to withstand, without loss of lading, a rollover with a linear velocity of 9 mph and that the top fittings protection system to be attached to the tank by welding.

In addition, in response to the NPRM, the overwhelming majority of industry commenters have expressed the view that the standards proposed in the NPRM are “technology-forcing” and that the tank car industry currently lacks the technological and engineering ability to manufacture tank cars meeting the proposed standards. According to commenters, the net effect of these “competing” standards in CPC-1187 and the NPRM has been that shippers and tank car purchasers (e.g., tank car lessors) cannot currently purchase PIH tank cars with any assurance that the cars will have a reasonable economic life.
1

Accordingly, commenters indicate that shippers and tank car owners are being forced to forego the phasing out of aging tank cars that they would normally retire and replace with new cars, potentially resulting in a shortage of cars needed for the transportation of PIH materials in the short term. While commenters generally express support for the development of a performance standard related to tank car puncture resistance, they recommend that DOT provide an interim solution to ensure the availability of PIH tank cars in the time period before DOT's proposed performance standards are finalized and tank cars can be built to meet those standards.

1
The NPRM proposed the complete phase-out within eight years of all PIH tank cars not meeting the proposed performance standards. As noted above, cars built to meet the requirements of CPC-1187 would not meet the standards proposed in the NPRM and because of weight restrictions, it is possible that cars built to meet CPC-1187 might not be retrofitable to meet any portion of the final performance standard promulgated in this rulemaking.

In this connection, in a petition dated July 3, 2008 (Joint Petition), the American Chemistry Council (ACC), American Short Line and Regional Railroad Association (ASLRRA), the Association of American Railroads (AAR), Chlorine Institute (CI), and Railway Supply Institute requested that the Department authorize interim standards for tank cars transporting PIH materials. In a separate petition filed on July 7, 2008, The Fertilizer Institute (TFI) made a similar request.
2

Each of these petitions is discussed in more detail below.

2
PHMSA assigned petition numbers P-1525 and P-1524 to the Joint Petition and TFI petition, respectively. On July 23, 2008, PHMSA published a notice soliciting public comment on the petitions under docket number PHMSA-2008-0182. 73 FR 42765.

Based on comments received in response to the NPRM and the two petitions for rulemaking, in this rule FRA and PHMSA are adopting interim standards for tank cars used to transport PIH materials. This rule is an interim response based on current engineering judgments within the affected market sector. DOT intends to continue working with the industry to complete research and testing on advanced tank car design. Accordingly, we anticipate additional regulatory proceedings as the results of continuing government and private sector research and development are validated and the resulting technology is successfully implemented by industry. DOT intends that the standards set forth in this rule shall apply in the meantime, pending the development and commercialization of more stringent performance standards.

II. Statutory Authority, Congressional Mandate, and NTSB Recommendations

Federal hazmat law authorizes the Secretary of DOT (Secretary) to “prescribe regulations for the safe transportation, including security, of hazardous material in intrastate, interstate, and foreign commerce.” The Secretary has delegated this authority to PHMSA. 49 CFR 1.53(b). The HMR, promulgated by PHMSA under the authority provided in Federal hazmat law, are designed to achieve three goals: (1) To ensure that hazardous materials are packaged and handled safely and securely during transportation; (2) to provide effective communication to transportation workers and emergency responders of the hazards of the materials being transported; and (3) to minimize the consequences of an incident should one occur. The hazardous material regulatory system is a risk management system that is prevention-oriented and focused on identifying a safety or security hazard and reducing the probability and quantity of a hazardous material release.

Under the HMR, hazardous materials are categorized by analysis and experience into hazard classes and packing groups based upon the risks that they present during transportation. The HMR specify appropriate packaging and handling requirements for hazardous materials, and require a

shipper to communicate the material's hazards through the use of shipping papers, package marking and labeling, and vehicle placarding. The HMR also require shippers to provide emergency response information applicable to the specific hazard or hazards of the material being transported. Finally, the HMR mandate training requirements for persons who prepare hazardous materials for shipment or who transport hazardous materials in commerce. The HMR also include operational requirements applicable to each mode of transportation.

The Secretary also has authority over all areas of railroad transportation safety (Federal railroad safety laws, 49 U.S.C. 20101
et seq.
), and has delegated this authority to FRA. 49 CFR 1.49. Pursuant to its statutory authority, FRA promulgates and enforces a comprehensive regulatory program (49 CFR parts 200-244) to address railroad track; signal systems; railroad communications; rolling stock; rear-end marking devices; safety glazing; railroad accident/incident reporting; locational requirements for the dispatch of U.S. rail operations; safety integration plans governing railroad consolidations; merger and acquisitions of control; operating practices; passenger train emergency preparedness; alcohol and drug testing; locomotive engineer certification; and workplace safety. FRA inspects railroads and shippers for compliance with both FRA and PHMSA regulations. FRA also conducts research and development to enhance railroad safety. In addition, both PHMSA and FRA are working with the emergency response community to enhance its ability to respond quickly and effectively to rail transportation accidents involving hazardous materials.

As noted above, on August 10, 2005, Congress passed SAFETEA-LU, which added section 20155 to the Federal hazmat law. 49 U.S.C. 20155. In part, section 20155 required FRA to (1) validate a predictive model quantifying the relevant dynamic forces acting on railroad tank cars under accident conditions, and (2) initiate a rulemaking to develop and implement appropriate design standards for pressurized tank cars.

In response to the accident in Minot, North Dakota, on January 18, 2002, in which a train derailment resulted in the catastrophic release of anhydrous ammonia leading to one death and 11 serious injuries, the NTSB made four safety recommendations to FRA specific to the structural integrity of hazardous material tank cars. The NTSB recommended that FRA analyze the impact resistance of steels in the shells of pressure tank cars constructed before 1989 and establish a program to rank those cars according to their risk of catastrophic failure and implement measures to eliminate or mitigate this risk. The NTSB also recommended that FRA validate the predictive model being developed to quantify the maximum dynamic forces acting on railroad tank cars under accident conditions and develop and implement tank car design-specific fracture toughness standards for tank cars used for the transportation of materials designated as Class 2 hazardous materials under the HMR. In response to the accident in Graniteville, South Carolina, on January 6, 2005, in which a train collision resulted in the breach of a tank car containing chlorine and nine people died from inhalation of chlorine vapors, the NTSB recommended, in part, that FRA “require railroads to implement operating measures such as * * * reducing speeds through populated areas to minimize impact forces from accidents and reduce the vulnerability of tank cars transporting” certain highly-hazardous materials. Each of these NTSB recommendations is discussed in the NPRM.
3

3

See
73 FR 17818, 17826-28. The NPRM indicated that NTSB classified FRA's responses to Safety Recommendations R-05-15 and R-05-16 stemming from the Graniteville accident as “Open-Response Received.” Subsequently, in a letter dated June 7, 2007, however, NTSB classified these recommendations as “Closed-Unacceptable Action” and “Open-Unacceptable Response.” A copy of NTSB's June 7, 2007, letter is available in the docket.

The Department considers this rule responsive to section 20155's mandate, as well as to the NTSB recommendations. As discussed in more detail in section IV below, however, we recognize that this rule does not directly implement each of the relevant NTSB recommendations. Instead, the interim standards we are adopting in this rule are only the first part of a longer-term strategy to enhance the safety of rail shipments of PIH materials. Improving the safety and security of hazardous materials transportation via railroad tank car is an on-going process. We plan to continue to develop and validate a performance standard to further improve the crashworthiness of PIH tank cars, with a view towards incorporating the improved performance standard into the HMR. Going forward, FRA's hazardous materials research and development program will continue to focus on reducing the rate and severity of hazardous materials releases by optimizing the manufacture, operation, inspection, and maintenance procedures for the hazardous materials tank car fleet. In addition, we plan to continue our holistic approach to rail safety, as discussed in detail in the NPRM, including railroad operating and maintenance practices; railroad routing practices; shipper commodity handling practices; and emergency response procedures.

III. The Proposed Rule

Generally, the NPRM proposed a two-pronged approach to enhancing the accident survivability of tank cars. First, the NPRM proposed to limit the operating conditions of tank cars transporting PIH materials. Second, the NPRM proposed enhanced tank-head and shell puncture resistance standards.

The NPRM described FRA's research demonstrating that the speed at which a train is traveling has the greatest effect on the closing velocity between cars involved in a derailment or accident situation and that the secondary car-to-car impact speed in such situations is approximately one-half the initial train speed (the speed of the train at the time of the collision or derailment). Based on this research, the Department recognized that limiting the operating speed of tank cars transporting PIH materials is one potential method to impose a control on the forces experienced by railroad tank cars. Accordingly, we proposed two operational speed restrictions:

(1) A maximum speed limit of 50 mph for all trains transporting railroad tank cars containing PIH materials; and

(2) A maximum speed limit of 30 mph in non-signaled (
i.e.
, dark) territory for all trains transporting railroad tank cars containing PIH materials, unless the material is transported in a tank car meeting the enhanced tank-head and shell puncture-resistance systems performance standards of this proposal.

As an alternative to the maximum speed limit of 30 mph in dark territory, we proposed submission for FRA approval of a complete risk assessment and risk mitigation strategy establishing that operating conditions over the subject track provide at least an equivalent level of safety as that provided by signaled track.

In conjunction with these speed restrictions, we also proposed improved tank-head and shell puncture-resistance standards. The enhanced standards proposed to require tank cars that transport PIH materials in the United States to be designed and manufactured with a shell puncture-resistance system capable of withstanding impact at 25 mph and with a tank-head puncture resistance system capable of

withstanding impact at 30 mph. To ensure timely replacement of the PIH tank car fleet, we proposed an eight-year implementation schedule, contemplating design, development, and manufacturing ramp-up in the first two years, replacement of 50% of the fleet within the next three years, and replacement of the remaining 50% of the fleet in the following three years. As part of this implementation plan, we proposed the expedited replacement of tank cars used for the transportation of PIH materials manufactured before 1989 with non-normalized steel head or shell construction.
4

Recognizing that improvements in tank car performance have historically relied in large part on thicker and/or stronger steel, which brings with it a corresponding addition to the empty weight of the tank car, we also proposed an allowance to increase the gross weight on rail for tank cars designed to meet the proposed enhanced tank-head and shell puncture-resistance systems performance standards (up to 286,000 pounds).

4
Non-normalized steel is steel that has not been subjected to a specific heat treatment procedure that improves the steel's ability to resist fracture.

IV. Discussion of Comments on the Proposed Rule

Subsequent to publication of the NPRM, DOT hosted a technical symposium on tank car crashworthiness and conducted four public meetings to solicit comment on the proposed rule. The intent of the technology symposium was to provide a forum for FRA and PHMSA to share with the tank car industry the agencies' collective knowledge and experience in the testing and design of rail tank cars significantly more crashworthy than conventional tank cars, as well as to provide parties involved in the manufacturing, repairing, and testing of tank cars an opportunity to openly discuss issues related to the manufacturing of such tank cars.

We received approximately 50 written comments in response to the NPRM, including comments from members of the railroad and PIH shipping industry, trade organizations, local governments, tank car manufacturing and repair companies, members of Congress, as well as members of the general public. Several of these commenters also provided verbal comments at the public meetings held during the subsequent comment period. The following discussion provides an overview of the written and verbal comments DOT received in response to the NPRM and how DOT has chosen to address those comments in this rule. As previously noted, two petitions were filed requesting DOT to establish interim tank car standards; comments on these petitions are set forth in Section V. More detailed discussions of specific comments on the NPRM and the petitions for interim standards, as well as DOT's responses, can be found in the relevant Section-by-Section analysis portion of the preamble.

Generally, commenters recognize the need to improve the crashworthiness of PIH tank cars and express support for DOT's efforts in the NPRM. For example, the NTSB supports the stated goals of the NPRM and states that many aspects of the proposal, when implemented, will significantly improve the safety of the transportation of PIH materials in railroad tank cars. The AAR applauds DOT's issuance of the NPRM as a “truly innovative approach” to tank car design and CI indicates that the organization “fully supports the major step forward” DOT took in issuing the proposed rule. Although commenters also generally support the development of a performance standard focused on tank car puncture resistance such as that proposed
5

commenters also raise important practical concerns regarding DOT's specific proposals. The majority of commenters' concerns are focused on (1) the technical basis for and feasibility of achieving, in the short term, the proposed tank-head and shell puncture resistance performance standards; (2) the proposed eight-year implementation period, including the proposed accelerated replacement of cars constructed with non-normalized steel; (3) the proposed allowance to increase the gross weight on rail of PIH tank cars; (4) the proposed speed restrictions, particularly the interim 30 mph speed restriction in dark territory for tank cars not meeting the proposed enhanced performance standards, but used to transport PIH materials; (5) the lack of proposed enhancements to PIH tank car top fittings; (6) the need for an interim standard for tank cars used to transport PIH materials; and (7) the costs associated with implementing the proposed rule.

5
Trinity Industries, Inc. (Trinity), a tank car builder, comments that issuance of the proposed puncture resistance performance standard is inconsistent with SAFETEA-LU's mandate to develop “appropriate design standards” for pressurized rail tank cars. Although we respectfully disagree with Trinity's comment, we note that the issue would not appear to be relevant to this rule in that we are adopting tank car design standards.

A. Proposed Performance Standards

The majority of commenters express the view that although the 25 and 30 mph shell and head-impact puncture resistance standards are laudable goals, such proposed standards are “technology forcing” and achieving such impact resistance utilizing existing technology and currently accepted tank car engineering practices is not possible in the short term. For example, Dow, a driving force behind the Next Generation Rail Tank Car Project (NGRTCP),
6

suggests that although the 25 mph shell-impact puncture resistance system standard (which represents a six-fold performance improvement over existing chlorine tank cars) may be obtainable based upon the design concepts and technologies developed by the NGRTCP, the proposed 30 mph head impact standard (which represents a ten to twelve-fold improvement over existing chlorine cars) is outside the range of solutions contemplated by the Project. Noting that no existing tank car designs under review as part of the NGRTCP would meet the proposed head and shell-impact standards, tank car builders estimate that it will take up to ten years until a design proven to meet the proposed performance standards (both 25 mph shell-impact and 30 mph head-impact puncture resistance standards) could be ready for full-scale implementation. Other commenters indicate that it may take approximately three years until a design proven to meet the proposed 25 mph puncture resistance standard will be ready for full-scale implementation. These commenters' concerns regarding the time required until the tank car industry can meet the proposed performance standards are discussed in more detail below with other comments related to the proposed implementation period.

6
The NGRTCP is discussed in detail in the preamble to the NPRM.
See
73 FR 17833-34.

Some commenters, noting the synergy between the proposed 50 mph speed limit for PIH tank cars and the 25 mph shell impact puncture resistance performance standard, question the efficacy of the proposed 30 mph head-impact standard. As explained in the NPRM and by FRA staff at the May 28, 2008, public meeting, the 30 mph head impact standard was intended to protect against impacts when a tank car is involved in the primary collision (
i.e.
, impacts other than the secondary car-to-car impacts upon which the proposed 50 mph speed limit was based). FRA believes that in such instances, it is desirable to have additional head-impact protection strategies available to help reduce the risk of loss of lading and that the available space in front of the tank-head will accommodate sufficient energy absorbing material

between the head shield or jacket and the inner commodity tank.
See
73 FR 17849.

NTSB acknowledges that establishing tank car puncture resistance at 25 mph would be an improvement that would enhance tank car safety. NTSB suggests, however, that such standard does not represent a standard for ensuring safety in 50-mph collisions because the general premise upon which the standard is based (
i.e.
, the finding by the Volpe National Transportation Systems Center (Volpe) that the secondary car-to-car impact speed is one-half that of the initial train speed) is not applicable to all derailment conditions. Specifically, noting the two-dimensional, linear model utilized in Volpe's research, NTSB recommends the development and validation of more technically rigorous models that include consideration of the many three-dimensional, highly nonlinear dynamic responses that occur in derailment situations. Noting that its Safety Recommendation R-04-06 contemplates the consideration of different types of critical-loading conditions observed in derailments, NTSB suggests that although improving the puncture-resistance of tank cars is an important safety enhancement, by itself, it does not fully respond to Safety Recommendation R-04-06. Accordingly, NTSB suggests that additional modeling and validation is necessary to understand the full range of dynamic responses that occur in derailments. We appreciate NTSB's comments in this regard and as we pursue continued research and development on advanced car design, we will continue to further refine our quantification of the dynamic forces acting on railroad tank cars in accident conditions.

CI notes that the proposed 30 mph head-impact standard represents an “exponential increase in severity over the existing head protection requirement” and questions whether the proposed standard goes beyond what is necessary to protect the integrity of the tank in real world accident scenarios. Noting its own efforts to address tank car puncture resistance, CI explains that its research demonstrates that a significant improvement (2x) in puncture resistance is possible if tank cars are constructed of steels with higher fracture toughness than AAR TC 128B steel (the steel typically used in tank car construction). Consistent with its Safety Recommendation R-04-07, NTSB similarly recommends that a standard for the fracture toughness of tank car construction materials be included in any final DOT tank car standard. NTSB suggests that the inherent material variability identified through FRA's research is common to the class of steel utilized and has been used in other applications to define fracture-based criteria. Although DOT believes that material properties play an important role in the performance of a tank car subjected to fatigue type loading, FRA's research has clearly demonstrated that for the impact conditions typical of accidents that result in a release, a holistic approach is required to prevent a breach of the commodity tank. As noted in the NPRM, however, DOT will continue to examine the dynamic fracture toughness of steels used in the construction of pressure tank cars in hazardous materials service and we will incorporate any workable tank car design-specific fracture toughness standards into the final performance standards.

Other commenters note that the Volpe concept work (described in detail at the technology symposium)
7

does not establish the feasibility of the proposed performance standards. Several commenters express the view that because the Volpe concept car differs significantly from traditional rail car designs and manufacturing methods, questions regarding the sill design, movement of the tank during yard impacts, how the car will be constructed, and other technical details need to be fully evaluated before the car can be manufactured and put into service. Commenters note that the proposed performance standards are based on impacts of 25 (shell) and 30 mph (head) from a 286,000 pound mass concentrated through a 6″ x 6″ impactor. Citing a recent head impact test by the NGRTCP, one tank car builder, American Railcar Industries (ARI), concludes that even meeting the 25 mph shell-impact puncture resistance standard requires a larger impactor, or less impacting weight. Another manufacturer suggests that it may be possible to achieve the 25 mph standard with the 6″ x 6″ impactor due to the deformations that are likely to occur, but the 30 mph standard probably would not be achievable.

7
Copies of technical presentations from the symposium, as well as a summary of the symposium is available in the docket.

Noting that current research has focused on development of a chlorine car (the Volpe “concept car”) to meet the proposed performance standards, commenters express the view that other PIH materials (
e.g.
, anhydrous ammonia, ethylene oxide, methyl mercaptan, anhydrous hydrogen fluoride) have significantly different physical and chemical properties that must be accommodated in tank car designs. For example, product density affects how much product can be loaded into a car. Arkema, a shipper of methyl mercaptan, a raw material used in the production of animal feeds for the poultry and swine industry, notes that chlorine weighs approximately 12 pounds per gallon, while methyl mercaptan weighs only about 7.8 pounds per gallon. Because chlorine is a rather dense material as compared to other PIH materials, the typical chlorine car has smaller tank dimensions than tank cars designed to transport other PIH materials. As Dow notes, these smaller tank dimensions have allowed the NGRTCP to design a chlorine car with greater thickness and greater standoff distances (
i.e.
, the distance between the tank and the tank's outer protection) than may be possible for tank cars designed to carry other PIH commodities.

Commenters also suggest that the differing physicochemical properties and severity of hazards presented by various PIH materials need to be considered when designing tank cars to handle particular PIH materials. DGAC notes that many PIH materials are highly flammable and will ignite prior to the formation of a toxic cloud. As an example, BASF notes that ethylene oxide has flammability ranges between 3% and 100% in air and therefore, that an ethylene oxide release would result in a fire before there was an opportunity to affect the general population from a toxicity hazard. BASF further notes that there is a significant difference in the danger posed by a Zone B PIH material (
e.g.
, chlorine) versus a Zone D PIH material (
e.g.
, ethylene oxide).

Commenters further state that the disparate physicochemical properties of the various PIH materials shipped via railroad tank car have historically led to very specific car designs for certain materials. For example, DuPont notes that oleum and sulfur trioxide have relatively high freezing points. Accordingly, rail cars intended for the transportation of oleum and sulfur trioxide must be equipped with sufficient insulation capable of maintaining the temperature of the chemicals above their respective freezing points. Similarly, tank cars used to transport chlorosulfonic acid are constructed of stainless steel tanks to prevent discoloring of the acid. According to DuPont, there is no feasible alternative to stainless steel and the properties of the stainless steel inner tanks relative to the puncture resistance requirements of the proposed performance standards would have to be considered. Similarly, shippers of

anhydrous hydrogen fluoride and hydrofluoric acid note that the corrosive properties of these chemicals have led to non-jacketed tank car designs for these particular commodities and that the non-jacketed cars allow for visual detection of any corrosive product on the outside of the commodity tank before it can compromise the integrity of the tank. Noting the Volpe concept car presented at the technology symposium and the NGRTCP car design rely on a “sandwich” (
i.e.
, layered design with a jacket encompassing supporting foam or other energy absorbing material surrounding and isolating the commodity tank from the structural forces of the moving train), these commenters suggest that such a design concept would introduce new maintenance and inspection challenges that could lead to a detriment in safety in that the inner tank could not be inspected as readily as is currently possible.

Although DOT recognizes commenters' concerns with commodity specific tank car design issues, as noted at the May 28, 2008 public meeting, the NPRM was not intended as a “one size fits all” approach. Specifically, as described at the technical symposium, the Volpe concept car is intended to demonstrate DOT's proposed approach to meeting the performance standards. DOT's approach, focusing on the energy absorbing capability of the tank car, is applicable to any type of tank car. DOT recognizes, however, that specific design elements would necessarily have to be modified for specific commodities.

Other commenters, including AAR and BNSF Railway Company (BNSF) suggest that the 6″ x 6″ impactor contemplated in the proposed rule is not representative of real world objects impacting tank cars and that any proposed standard needs to consider impacts other than carbody-to-carbody impacts, such as impacts by smaller, sharper objects; the crushing or tearing away of the shell; and oblique punctures or punctures away from the centerline of the tank. In support of this position, BNSF references five accidents on its railroad that resulted in releases from eight pressure tank cars over the last 12 years. Five of those eight releases did not involve carbody-to-carbody impacts. Instead those tank car releases involved: (1) Stub still failure due to a large vertical force on the draft gear which caused the sill to tear away a section of the tank shell, (2) puncture by pieces of broken rail, (3) the shearing off of liquid and vapor valves; (4) puncture by being struck by the corner of a flat car; and (5) puncture when the corner of an I-beam (which fell from a previous car) struck a tank car. Similarly, AAR expresses the view that the proposed performance standard is flawed because it focuses exclusively on the ability of tank car designs to absorb energy without releasing product and does not consider other possible modes of failure. Specifically, AAR suggests that DOT's focus on energy absorption effectively addresses punctures from “large, blunt objects coming into contact with the tank head or shell from a perpendicular direction,” but ignores other accident scenarios prevalent in railroad operations, including: (1) Punctures from smaller, sharper objects; (2) releases due to the tearing away of attachments to the shell; (3) cracking of the shell; and (4) oblique punctures and punctures away from the center of the head or the centerline of the shell. On the other hand, the Railway Supply Institute, Inc. (RSI) suggests that basing the proposed performance standard on a test utilizing a 6″ x 6″ impactor is not appropriate because the size of the impactor does not correlate to anything expected to be seen in the field. RSI suggests that the size of the impactor should be increased to more accurately reflect the face surface of a standard non-shelf coupler.

In response to the BNSF and AAR comments regarding the NPRM's focus on the energy absorption of impacts to tank cars, we note that the proposed head and shell impact standards were based on a series of complementary measures, including: (1) Blunting the load impacting the tank, (2) absorbing energy, (3) reinforcing the commodity tank, and (5) removal of in-train forces from the commodity tank. Although DOT continues to believe that this approach addresses each of the failure modes cited by commenters, as explained at the technology symposium, DOT recognizes that this approach is most effective in addressing carbody-to-carbody impacts that result in the bulk crushing and deformation of tank cars, and what DOT believes to be the most likely failure mode to result in a catastrophic release of hazardous materials, that is, the puncture of the head or shell by some intermediate size piece of railroad equipment (
e.g.
, coupler, drawbar, side or draft sill).

Commenters suggest that DOT should not promulgate final head and shell puncture-resistance standards until the NGRTCP has completed its work and compliant tank car designs have been developed, and cars have been built and tested for each PIH commodity. Dow indicates that the NGRTCP expects to have a prototype tank car built by the end of 2008 that would meet a 25 mph head and shell impact puncture resistance standard. Dow cautions, as do other commenters, that such a prototype car should be subjected to an additional period of in-service testing prior to being approved for use. Further, noting the “evolutionary process” of tank car safety enhancements, Dow concludes that the proposed performance standards are two to three generations ahead of what is currently achievable. Accordingly, in its comments, Dow urges the Department to adopt regulatory standards based on “practical, proven, real world solutions.” Similarly, commenters express the view that current generation PIH tank cars (
i.e.
, existing PIH rail car designs) are not inherently flawed or unsafe. Accordingly, these commenters suggest that DOT pursue a design that utilizes current car designs as a “platform” for safety and security enhancements.

Although DOT believes that the proposed performance standards can be met utilizing currently available materials and innovative engineering approaches to tank car design, as discussed above, we recognize the need to further model and validate any final performance standard. We also recognize the need to assist industry in developing the requisite technical expertise to accurately model and analyze the large deformation with material failure problems required to develop a significantly better tank car design (whether that final design is one, two, or three generations ahead of existing DOT specification cars). We will continue to work with the tank car manufacturing and shipping industries through a series of technical meetings to share the ongoing findings of FRA's tank car research program (including Volpe's modeling and testing efforts). The goal of this work will be to develop an improved performance standard for adoption into the HMR. Meanwhile, in order to ensure the ongoing availability of PIH tank cars, this rule establishes interim standards for tank cars that may be built prior to the development and commercialization of the final performance standard. This rule responds to commenters' recommendations that in the time period before the development and commercialization of a final performance standard, we adopt a design that utilizes current car designs as a basis for improvements. As discussed in more detail in sections VI and VII below, this rule adopts enhanced commodity-specific design standards for PIH tank cars based on existing DOT specification cars.

AAR urges DOT to adopt its “conditional probability of release”

(CPR) metric in ascertaining the safety afforded by various tank car designs (
i.e.
, the probability of a release in the event of an accident). This request was reiterated in the Joint Petition for an interim standard in which the ACC, ASLRRA, AAR, CI, and RSI requested that DOT approve interim rail tank car standards that would incorporate design specifications as well as an alternative performance standard based on the CPR metric. The Joint Petition is discussed in more detail in section IV.F below. Although FRA believes that the analysis underlying the CPR metric is technically sound from the standpoint of implementation of standard statistical mathematics, FRA does not believe that the design of a tank car can rationally be based on statistical analysis alone. Instead, consideration of the physics that tank cars experience during accidents, derailments, and other types of rail incidents must be considered. FRA is also concerned that many of the issues raised by commenters concerning validation of the performance standard proposed in the NPRM apply equally to the “improvement factor” utilized in the Joint Petition. We note in this regard that the “improvement factor” was, in effect, reverse engineered from existing, available tank car specifications. The Joint Petition asks DOT to allow for alternative proofs that the tank car improvement factor for the commodity is met, even though different designs are employed than those specified as meeting the requirement. FRA does not believe that alternative proofs could be utilized in this context without reliance on broad assumptions that may not be supported by actual experience. Additionally, going through the exercise of attempting to prove an outcome that was tied to an available DOT specification in the first instance would be both awkward and likely fruitless, because the basis of the regression results rely on evaluation of traditional DOT specification cars. DOT is aware that this approach is built around an expectation that protective structures may be distributed between the tank and jacket or head shield as described in the petition for chlorine cars. Accordingly, this rule does not adopt the CPR metric as proposed by both AAR and the additional parties to the Joint Petition. However, DOT does accept the basic framework of specifications that the parties contemplate for use and provides a more direct and less cumbersome means to demonstrate the performance of alternative designs of the sort the petitioners sought.
8

The Department's rationale is discussed in more detail in section VI below.

8
Both the petition and this rule rely upon an assumption that, within reasonable bounds, distribution of protective structure between an exterior layer and the tank itself will produce the same results from the point of view of tank puncture resistance as using all of the material thickness in constructing the tank. Petitioners have not established that this is the case; however, engineers directing and conducting FRA-sponsored research are satisfied that the effects are likely commutative (additive), at least in the classic puncture scenarios described in the NPRM.

B. Proposed Implementation Period

The majority of commenters also express the view that the proposed eight-year implementation period is overly-aggressive and not realistic. Specifically, commenters contend that design, development, and manufacturing ramp-up cannot be completed within the two-year period contemplated by the proposed rule. Commenters also state that the six-year fleet replacement period contemplated in the NPRM is too short, given the capital expenditures that would be required by individual fleet owners to replace their entire fleets in six years, the capacity of tank car manufacturers to manufacture new cars, and other market forces (
e.g.
, demand for ethanol tank cars). Further, several commenters express the opinion that the proposed rule's requirements that 50% of each owner's fleet be replaced with cars conforming to the proposed performance standards within five years of a final rule's effective date and the requirement that all PIH tank cars constructed of non-normalized steel in the head or shell be replaced within the same time frame are unjustified, and in some instances, impossible to meet.

With regard to the two-year design and manufacturing ramp-up period contemplated in the proposed rule,
9

commenters assert that it will take up to ten years until a proven design is ready for full-scale implementation.
10

Specifically, in written comments, as well as at the technical symposium, tank car builders explain that the time required to take a new tank car design from the conceptual research and development point to full-scale production is highly dependent on several competing factors. First, the extent to which a new design differs from traditional rail car design will affect the time required to finalize, test, and implement that design. Second, builders indicated that the time necessary to move from design to full-scale production will also be dependent on the extent of manufacturer re-tooling required, the extent of changes in fabrication protocols and welding protocols required, the extent of training and recertification of skilled workers in those new protocols and welding techniques required, the need to obtain potentially new materials, as well as the need for Chapter 11
11

service testing. Commenters suggest that a service trial period ranging from between 12 to 18 months to two years should be required for any new car with a design substantially different from current cars.

9

See
73 FR 17846-47.

10
Some commenters indicated that it would take at least three years to develop a compliant design (at least to the 25 mph puncture resistance standard) and some said it would take two years to get a design to market, provided a bigger impactor was used. These commenters, however, also noted that an additional service trial period would be necessary before the cars could reasonably be put into full service.

11
Chapter 11 of the AAR's Manual of Standards and Recommended Practices, CII, M-1001, entitled “Service-Worthiness Tests and Analyses for New Freight Cars.”

RSI asserts that the typical regulatory lead time for “other federal performance standards that require new designs and engineering breakthroughs” (
i.e.
, technology forcing regulations) is substantially longer than the two-year period contemplated by the proposed rule. According to RSI, new performance regulations in other transportation industries with “significantly more resources allocated to research and development” have allowed from three to six years for design development to the commencement of production. In support of this assertion, RSI cites a recent U.S. Environmental Protection Agency rule on locomotive emission standards, which allows seven years for compliance with performance standards requiring the development of new technology, while allowing one year for compliance with performance standards that can be met with existing technology.

Further, as discussed above, several commenters note that to date, research has focused on a chlorine car (the Volpe “concept car”) designed to meet the proposed performance standards. Citing practical experience, commenters involved in the shipment of PIH materials other than chlorine (
e.g.
, anhydrous ammonia, ethylene oxide, methyl mercaptan, anhydrous hydrogen fluoride) express the view that any final tank car standards will need to take into consideration the physicochemical properties of specific PIH materials, as well as the differing hazards presented by each material. These commenters assert that this commodity-specific analysis will necessitate more time than

the two-year design and manufacturing ramp-up period proposed.

Asserting that a six-year replacement period for existing bulk packages is “unprecedented,” DGAC states that the proposed rule's six-year replacement period is “unjustifiable from a cost benefit perspective.” Arkema, a methyl mercaptan shipper, notes that there are a limited number of engineers and rail car manufacturers to meet the mandates of any new railcar design. Accordingly, Arkema expresses concern that first priorities for designing and building enhanced rail cars for PIH materials will focus on cars designed to transport those substances that make up the bulk of the PIH railcar fleet (
i.e.
, chlorine and anhydrous ammonia).

With regard to the proposed rule's requirement that all PIH tank cars constructed of non-normalized steel in the head or shell be replaced within five years after the final rule's effective date, (effectively, half-way through the six year proposed fleet replacement period), several commenters note the PIH shipping industry's voluntary efforts already underway to phase-out these tank cars. TFI, the national trade association that represents fertilizer producers, importers, wholesalers and retailers (
i.e.
, shippers of anhydrous ammonia), notes that its members are already voluntarily phasing-out the use of non-normalized steel cars for the transportation of anhydrous ammonia. Specifically, TFI states that its members utilize approximately 4,600 tank cars to ship anhydrous ammonia and only about 340 of those cars are pre-1989 non-normalized steel cars. Further, TFI notes that its members anticipate that these 340 non-normalized steel cars will be completely removed from their anhydrous ammonia fleets earlier than the five years proposed in the NPRM. For example, one member, CF Industries, Inc. (CF), states that, beginning in 2005, it began voluntarily to modernize its fleet of anhydrous ammonia tank cars by phasing out 313 of its pre-1989 non-normalized steel cars. CF indicates that it plans to remove the remaining 24 non-normalized steel cars from its fleet of anhydrous ammonia cars by the end of 2008.

Several commenters, citing present difficulties obtaining new PIH tank cars, raise the concern that if such difficulties are not resolved in the short term, shippers may be forced to keep these older cars longer or reduce the size of their fleets. These concerns are discussed in more detail below with other comments pertaining to the need for an interim standard for PIH tank cars.

CI comments that although it does not object to prioritizing the removal of pre-1989 tank cars constructed with non-normalized steel in any fleet replacement program, the accelerated retirement of these cars as proposed is not justified because there is not sufficient evidence demonstrating that such accelerated replacement will significantly enhance rail safety. Similarly, other chlorine shippers (PPG & U.S. Magnesium) say that early replacement of non-normalized steel cars as proposed is not justified since the performance of non-normalized cars has not differed significantly from that of normalized cars, and the cars show similar puncture resistance to normalized steel cars. Further, PPG notes that as proposed, the accelerated phase out of non-normalized PIH tank cars would require PPG to change out 75% of its fleet in three years, having a significant impact on PPG's earnings and putting PPG at a significant disadvantage relative to its competition. On the other hand, another chlorine shipper, Olin Corporation (Olin), does not object to the accelerated phase out of the pre-1989 non-normalized steel cars so long as the “accelerated transition” (presumably referring to the proposed requirement that one-half the fleet be replaced with cars meeting the enhanced performance standards within five years) is limited to non-normalized cars.

As an alternative to the overall eight-year implementation period proposed, both CI and TFI suggest that any final implementation period should be developed as part of a joint government/industry effort. PPG, which has a fleet of almost 2,600 owned and leased tank cars used for shipping chlor-alkali products, suggests that instead of specifying an implementation period in terms of a date certain, DOT incorporate a “test plan” into any final rule establishing enhanced tank car performance standards. Specifically, PPG suggests that such “test plan” include a statistically significant test fleet, a service trial period, and process for intermediate inspections. Dow recommends that DOT consider a longer transition period based upon the age, safety, and performance features of tank cars or to phase in new tank car standards for different PIH commodities over successive periods of time, allowing shippers to cascade cars down in service from higher to lower risk PIH materials. DOT appreciates the alternatives recommended by these commenters. Because the rule is limited to standards for new tank car construction in the time prior to the development, adoption, implementation and commercialization of a final performance standard, incorporation into this final rule of any of the recommendations is not appropriate at this time. We will, however, consider the specific recommendations as we develop regulatory requirements to implement a final performance standard.

With regard to the time period allowed for individual car owners to replace their existing PIH tank car fleets with tank cars meeting any final DOT standard, commenters suggest that consideration must be given to several competing factors on a fleet-by-fleet basis.
12

For example, several shippers have voluntarily upgraded their fleets over the last few years, and have purposefully “over-built” their tank cars with additional safety features not mandated by the HMR. These shippers express the view that unless consideration is given to these additional safety features already in place, they are effectively being penalized for voluntarily investing in those upgrades in the first place. Commenters also express the view that individual fleet size and age, annual shipment volumes, product characteristics, quantities of cars available for purchase or lease, and manufacturing delivery schedules are other factors that need to be considered on an individual fleet-by-fleet basis when determining an appropriate fleet replacement period.

12
See Transcript of comments of PPG at May 14, 2008 meeting (available in the docket) and; written comments of U.S. Magnesium and ACC in the docket (document numbers 57 and 86).

We appreciate the comments regarding the need to consider adequate time for developing car designs, validating compliance with the performance standards, and ensuring the car is dynamically suitable and serviceable. DOT will consider these issues as we work to validate and finalize a performance standard for PIH tank cars and incorporate that standard into the HMR. We note that issues related to a delayed effective date would not appear to be relevant to this final rule, since builders can adapt existing tank car designs within a short time to meet the interim requirements. We also are modifying our proposal for phasing out cars constructed prior to 1989 with non-normalized steel in the head or shell. Although we continue to believe that an accelerated phase out of these cars is justified, we recognize the voluntary efforts already underway by many fleet owners to phase out these cars, in many cases on schedules more

aggressive than the five-year deadline proposed in the NPRM. Rather than imposing a fixed deadline, this rule requires rail car owners that elect to retire or remove rail tank cars from PIH service, other than because of damage to the cars, to prioritize the retirement or removal of pre-1989 non-normalized steel cars.

C. Proposed Allowance To Increase the Gross Weight on Rail of PIH Tank Cars

Although commenters raise practical concerns related to an increase to 286,000 pounds in the maximum gross weight on rail of hazardous materials tank cars, most generally support this aspect of DOT's proposal. Specifically, AAR indicates that the infrastructure of Class I carriers can generally accommodate the heavier cars and that short line railroads should generally be able to transport the heavier cars, with a few isolated weight restrictions (
e.g.
, bridges).
13

TFI expresses support for this aspect of DOT's proposal, but noting the practical issue that some anhydrous ammonia shipment origin and destination points cannot handle the heavier cars, TFI expresses concern that light loading (loading a tank car with less than its full capacity of product) and diversion to other modes of transportation (
e.g.
, highway) could occur. Similarly, CI indicates that although the proposed allowance to increase the maximum gross weight on rail would be a “positive move removing regulatory burden on shippers using the heavier car,” CI expresses the same concerns as TFI. Individual shippers and the DGAC commented similarly, with one shipper (U.S. Magnesium) noting that it expects to upgrade its own track this year to accommodate 286,000 pound cars. At the May 14, 2008 public meeting, a representative of Olin Corporation, one of the largest shippers of chlorine in North America, estimated that due to infrastructure issues, approximately 50% of Olin's customers are currently unable to receive 286,000 pound cars. Further, the Olin representative noted that if the current 500 psi tank car typically used to transport chlorine were replaced with a 600 psi car, as originally proposed by the AAR's interchange standard, due to the increased weight of the tank car itself, Olin would have to light load approximately half of its shipments by approximately six tons each. In other words, instead of shipping 90 tons of chlorine in one tank car, Olin would be limited to shipping only 84 tons per tank car. Assuming demand remained constant, as other commenters note, this light loading would translate into additional shipments of chlorine and potentially the need for additional tank cars in which to transport the chlorine.

13
No short line railroad directly commented on the NPRM. However, the American Short Line and Regional Railroad Association did join in the petition filed by the AAR, ACC, and RSI.

In response to questions presented by the Department at the May 15, 2008 public meeting regarding exactly how many anhydrous ammonia origin and destination points would not be able to handle the heavier cars, in its written comments TFI notes that five of its members reported that approximately 2,758 shipments of anhydrous ammonia would be affected annually. In response to a similar question posed on May 14, 2008 to CI, the Institute reports that of the six member companies responding to the question, approximately 50% of the origin and destination points of each company would be unable to handle rail tank cars weighing 286,000 pounds. The American Chemistry Council (ACC), which represents companies that ship most, if not all, of the PIH materials other than anhydrous ammonia, similarly noted that not all shipper and receiver locations of its members can accommodate 286,000 pound gross weight on rail cars.

TFI and individual shippers of anhydrous ammonia suggest that a longer phase-in schedule would allow more time for infrastructure upgrades necessary to support the heavier car and suggest that DOT require that railroads prioritize upgrades in geographical areas through which PIH materials are typically transported.

Although we recognize the practical issues noted by commenters associated with utilizing heavier tank cars to transport PIH materials, we also note that AAR's existing interchange standards, applicable to all freight car types and products, provide for the free interchange of freight cars up to 286,000 pounds.
14

Accordingly, we understand that freight rail cars with a maximum gross weight on rail of 286,000 pounds have become the industry standard for Class I railroads and that a substantial portion of the entire North American freight car fleet (not just hazardous materials tank cars) already meets the 286,000 pound interchange standard.
15

Given anticipated growth and capacity issues, FRA believes that the number of 286,000 pound freight cars will continue to increase over the coming years as railroads and shippers seek to maximize the resulting efficiencies and reductions in operating costs associated with the use of these larger freight cars. In general, use of larger 286,000 pound rail cars reduces the number of cars needed to transport the same volume of cargo, allowing corresponding reductions in the number of trains and locomotives. These reductions produce savings in ownership, maintenance, and crew costs; improved net-to-tare ratio (ratio of goods carried to empty car weight); and reduced fuel costs associated with the decrement of the train resistance (fewer axles needed for equivalent car weight). Offsetting these cost advantages are higher maintenance of way costs (including costs to upgrade track from 263,000 pound compliant to 286,000 pound compliant). Although short lines in most instances do not handle traffic volumes sufficient to truly realize these cost savings, in order to participate in the national rail network (
i.e.
, to originate and terminate traffic from other railroads), short lines must be able to accommodate the equipment used by Class 1 carriers. Accordingly, short lines must upgrade the weight-bearing capacity of their tracks and bridges to handle 286,000 pound railcars or risk losing business. FRA understands that throughout the last several years the short line industry has been going through an extensive process of upgrading track infrastructure to accommodate 286,000 pound freight cars. The short line industry has been aided in this endeavor through state funding, tax credits, and most recently the Rail Revitalization and Improvement Funding (RRIF) program, which provides loans and loan guarantees for the acquisition, development, improvement, or rehabilitation of rail equipment or facilities.

14
Standard S-286 is the existing industry standard for designing, building, and operating rail cars at gross weights between 263,000 pounds and 286,000 pounds.

15
As noted in the NPRM, to date DOT has also issued several Special Permits allowing the use of tank cars weighing up to 286,000 pounds.
See e.g.
, 71 FR 47288, 27301 (Aug. 16, 2001) (Special Permit number DOT-SP 14167, Trinity Industries, Inc.).

Accordingly, as noted at the May 15, 2007 public meeting, FRA believes that infrastructure restrictions related to the use of 286,000 pound tank cars are for the most part limited to PIH shipment origin and destination points. FRA also believes that the railroad industry standard providing for 286,000 pound freight cars generally will lead to the upgrading of not only railroad infrastructure, but the infrastructure of companies that ship or receive by rail (whether via hazardous materials tank cars or other railroad freight cars).

As noted above, although several shippers raise practical concerns related to the proposed allowance to increase the maximum allowed gross weight on rail of hazardous materials tank cars,

several of those same shippers suggest that a longer phase-in period for enhanced tank cars would allow more time for infrastructure upgrades to handle the heavier cars. In addition, because the scope of this rule is limited to newly-manufactured cars, shippers will have the flexibility to use existing 263,000 pound cars where infrastructure does not support the heavier cars.

At the end of the day, most of the commenters that expressed concern about the 286,000 pound issue joined one of the two petitions for rulemaking seeking establishment of interim tank car standards. Both petitions advocate increases in package strength that inevitably will either lead to construction of 286,000 pound cars (if allowed) or reduced-capacity 263,000 pound cars. Our economic analysis recognizes that, for an interim period during which remaining facilities are being improved to handle 286,000 pound cars, some additional shipments will be required. This should not impose an impossible burden on anyone; in fact, most commenters, while expressing some concern about increased costs, express considerable support for the adoption and implementation of safety improvements.

D. Proposed Speed Restrictions

The NPRM proposed a maximum speed limit of 50 mph for all trains containing railroad tank cars used to transport PIH materials, and a maximum speed limit of 30 mph in non-signaled (dark) territory for all trains with railroad tank cars transporting PIH materials, unless the material is transported in a tank car meeting the proposed enhanced tank-head and shell puncture-resistance systems. The NTSB and several members of the PIH shipping industry (tank car owners and lessees) express support for these proposed operational restrictions. For example, noting that the NTSB has attributed recent incidents involving the breach of chlorine tank cars to railroad operational issues, CI expresses its full support for the proposed operational restrictions. Another commenter (Occidental Chemical Corporation (OxyChem)) suggests that the proposed rule should have included additional operational improvements and restrictions by railroads and notes that although the speed and the presence of signaled versus dark territory are factors impacting the likelihood and severity of an accident, other factors (such as traffic density, bidirectional traffic, number of switches along a line, population densities, positive train control, and placement of PIH tank cars within trains) also need to be considered. Noting operational restrictions imposed through a recent Special Permit issued to BNSF Railway authorizing the railroad to operate outside the requirements of 49 CFR 174.14 (commonly known as the 48-hour rule) in order to better manage its PIH movements over non-signaled track, OxyChem suggests that similar operating restrictions be incorporated into the final rule.
16

16

See
Special Permit No. DO-SP 14436 (Jan. 30, 2008). The Special Permit provides BNSF with relief from the requirements of the 48 hour rule when transporting TIH materials over certain dark territory routes, subject to certain conditions (
e.g.
, maximum authorized speed of 35 mph, route must be evaluated and inspected by qualified railroad track department personnel prior to train hauling PIH materials traversing the track, trains hauling PIH materials must hold the main line during meets, and trains on sidings must stop before a PIH train passes).

Although expressing support “in principle” for the proposed speed restrictions, NTSB asserts that such restrictions do not fully address its Safety Recommendations R-05-15 and R-05-16 relating to operating speeds in non-signaled territory. Specifically, NTSB notes that its Safety Recommendation R-05-15 applies to any train operating in non-signaled territory, with no system to provide train crews with advance notice of switch positions; the NPRM would apply only to tank cars transporting PIH materials. Similarly, NTSB notes that its Safety Recommendation R-05-16 includes operating measures (including positioning tank car toward the rear of trains and reducing speeds through populated areas) designed to minimize impact forces from accidents and to reduce the vulnerability of tank cars transporting PIH materials; neither of which were considered in the NPRM. Although, as discussed below, DOT agrees with NTSB that reduced train speed in non-signaled territory can be part of a strategy to mitigate the effects of train accidents, we do not believe that Recommendations R-05-15 and R-05-16 can be effectively implemented in their entirety without introducing additional safety risks and an extreme economic burden on industry.
17

As we work to develop and implement a final performance standard, however, we will continue to evaluate the potential of any feasible operating measures to minimize the impact forces from accidents and reduce the vulnerability of PIH tank cars.

17
FRA's specific concerns with these Safety Recommendations are discussed in the NPRM. 73 FR 17828.

Some of the same shippers expressing support for the proposed operational restrictions, however, also express concern regarding the potential negative impacts of the speed restrictions, including longer transit times, increased costs, potential increase in number of cars needed to meet demand, and apparent competing goals of Transportation Security Administration (TSA) initiatives to reduce the transit time of PIH materials, including reducing the dwell time of PIH shipments in transportation through high density population centers. Similarly, citing the same concerns noted above, other PIH material shippers express the view that the detrimental effects of certain aspects of the proposed operational restrictions would outweigh any safety benefits to be derived from such restrictions. For example, the National Association of Chemical Distributors (NACD) expresses concern with the proposed interim 30 mph speed restriction in dark territory for PIH tank cars not meeting the enhanced performance standards proposed. Specifically, NACD asserts that such a speed limit is “contrary to the important objective of having these materials in transit for as short of a time as possible.” NACD further asserts that the 30 mph speed limit would provide no guarantee that incidents would be eliminated. Further, NACD asserts that “if two trains traveling at 30 mph were to crash, the result would be the same as that of a crash involving a single train traveling at 60 mph.”

NACD also expresses the view that the proposed 30 mph speed limit would adversely affect the timely delivery of anhydrous ammonia, a time-sensitive product given the short window of opportunity for application in agricultural operations. Similarly, Dow suggests that the operating restrictions proposed in the NPRM (taken together with other regulatory requirements), would “only exacerbate” the current situation of the tank car industry and even “accepting the optimistic assumption in the NPRM that compliant tank cars will be available for purchase in two years, TIH shippers are likely to require more tank cars before then, if the proposed operating restrictions” are implemented in the meantime.
18

18
Arkema indicated that it does not support maximum speed limit restrictions based solely on railcar content and that any speed limit restrictions should also be based on “roadbed construction and environment.” In response to this comment, DOT notes that FRA's track safety standards (49 CFR part 213) mandate minimum safety requirements that a track must meet and the condition of the track is directly tied to the maximum allowable operating speed for the track.

Subject to certain practical concerns, AAR and the Class I railroads (including CSXT, CP, and NS), generally support the proposed 50 mph maximum speed

limit for all tank cars transporting PIH materials. However, these commenters strongly oppose the proposed interim 30 mph restriction in dark territory for tank cars not meeting the proposed tank head and shell impact performance standards.
19

First, acknowledging that as proposed, both the 30 and 50 mph speed limits would apply to residue tank car shipments of PIH materials, AAR expresses the view that the risk of a significant release of a PIH material “from residue shipments is so small that the costs imposed on railroads and society from either speed limit cannot be justified.” AAR also notes that the Department's analysis of costs related to the proposed 50 mph restriction in the Regulatory Impact Analysis (RIA) accompanying the NPRM appears to assume that the only trains that would be impacted by the 50 mph speed restriction would be trains operating with fewer than five tank cars containing PIH materials in accordance with industry's standard practice (
i.e.
, AAR's Circular OT-55-I).
20

Since Circular OT-55-I only applies to loaded tank cars, AAR reasons that DOT must be “assuming that its proposal also only applies to loaded tank cars.” Further, AAR asserts that DOT's estimate in the RIA that there are 78,000 tank car loads of PIH materials annually is reasonable only if residue shipments are not counted. AAR further asserts that should DOT desire to apply either proposed speed restriction to residue shipments, publication of a new NPRM would be required.

19
CSXT noted that OT-55-I's 50 mph speed limit on key trains “does not have the same network implications as dropping from 50 to 30 mph. In maintaining network fluidity, homogeneity of speeds is invaluable. If a train ordinarily can operate for parts of its run at above 50 mph, but is forced on occasion to limit speeds to 50, the adverse effects are generally not extensive. In addition, general merchandise trains that operate out of areas where TIH is sourced are scheduled with the expectation that they will always be limited to 50 mph.” NS further noted that they treat all trains containing one or more loaded PIH tank cars (as opposed to OT-55-I's five or more loaded PIH tank cars) as key trains. Accordingly, NS's standard practice is to operate trains with one or more loaded PIH tank cars no faster than 50 mph.

20
A copy of AAR Circular OT-55-I is available in the docket and a more detailed discussion of the Circular's recommended practices is included in the NPRM. 73 FR 17831.

The commenting Class I railroads echoed AAR's views regarding residue tank cars and suggested that as an alternative DOT adopt a requirement that “virtually all PIH be removed from a tank car before it is returned to the delivering rail carrier.”

As noted above, AAR and most of the Class I railroads that provided written comments strongly oppose the proposed 30 mph interim speed limit for tank cars transporting PIH materials in dark territory that do not meet the enhanced performance requirements of the rule. These commenters reiterate the practical concerns expressed by shippers, assert that DOT did not adequately justify the proposed restriction, and suggest that the proposed restriction would have an adverse effect on railroad operations (
e.g.
, increased switching, delays and/or increased transit times for virtually all railroad customers thereby reducing equipment utilization (which would exacerbate existing capacity constraints), and increasing dwell time of PIH tank cars in yards and terminals). In addition, CP asserts that the NPRM's focus on PIH shipments traversing “non-signaled territory does not appear to be rationally related” to the stated purpose of the rule (
i.e.
, to minimize the probability of release from a PIH tank car in the event of an accident).

AAR notes that the proposed 30 mph speed limit would require railroads to adjust their operations in one of two ways. First, railroads could group PIH shipments in fewer trains, thereby limiting the number of trains that would be subject to the speed restriction. AAR asserts, however, that the ability of railroads to group PIH cars in fewer trains is limited by the regulatory requirement to expedite hazardous materials shipments.
See
49 CFR 174.14 (prohibiting, with certain exceptions, carriers from holding hazardous materials shipments for longer than 48 hours at any one location). Further, AAR asserts that to the extent railroads are able to group PIH tank cars in fewer trains, the dwell time for such shipments would necessarily increase; which is directly counter to TSA's efforts to reduce dwell time for PIH shipments. CP estimates that holding PIH tank cars for consolidation into fewer trains on one line segment of 430 miles of non-signaled track between Portal, ND and Glenwood, MN (Portal-Glenwood line), would increase dwell time by a minimum of 4 days in each direction (
i.e.
, 8 days on a round trip). CP further notes that such consolidation would result in an additional 1-2 switching moves during the course of each PIH shipment, which AAR suggests could have an adverse safety impact by increasing the exposure of employees to injury.

Second, AAR notes that railroads could slow all trains with PIH shipments in non-signaled territory to the proposed 30 mph limit. AAR asserts that an overall reduction in speeds for all PIH-hauling trains would adversely affect railroad operations by decreasing overall system velocity, which could potentially lead to diversion of some traffic to other modes of transportation.
21

21
Although commenters caution that diversion of PIH shipments to other transportation modes (
e.g.
, motor carrier) may occur if rail transportation becomes too cumbersome or expensive, it appears that any such diversion would be limited due to safety and cost considerations. Commenters note it takes approximately four truck loads to transport the same capacity as one rail tank car. Commenters further note that diversion to motor carrier is generally only cost effective for relatively short moves (
i.e.
, moves up to 500 miles).

CSXT asserts that the proposed 30 mph interim speed restriction in dark territory is based on two faulty assumptions: (1) That only trains actually containing a PIH tank car would be affected by the proposed restriction; and (2) that as new cars meeting the proposed performance requirements come into service, the number of trains that will be affected by the speed restriction will decrease. CSXT contends that, given its train scheduling methodology, both of these assumptions are false. According to CSXT, “[t]he projected run time of a scheduled merchandise train (
i.e.
, a train potentially carrying non-hazardous as well as hazardous freight) is based on three factors: (1) The maximum authorized speeds in the timetable, (2) the meet and pass planning in [the CSXT] systems, and (3) the historical run times of trains on the subdivision.” In building initial train profiles under the provisions of the proposed rule, CSXT contends that it would have to assume the most restricted scenarios (
i.e.
, assume that all general merchandise trains operating in non-signaled territory would have a PIH car) and that “[m]aking tactical changes daily based on the actual train consist would simply not be viable.”

According to CSXT, 17 of its 51 scheduled general merchandise trains operating in non-signaled territory would be unable to make the crew change point if a 30 mph speed restriction were imposed. In these 17 instances, CSXT notes that having to routinely re-crew trains en route would disrupt operations, creating at a minimum, “17 daily choke points on the CSXT network.” Further, CSXT contends that the proposed 30 mph speed restriction would result in a 10% reduction in capacity on one densely traveled line. Although CSXT did not identify the line at issue, it reported that the potential effects of a 35 mph speed restriction and a 40 mph speed restriction on this same line and concluded that restrictions would result in capacity reductions of 7% and 4%, respectively. CSXT further notes that each of these analyses considered absolutely perfect operating conditions,

with no track curfews, other network congestion issues, or localized difficulties.

Finally, CSXT explains that rail network velocity directly impacts how fast privately owned freight cars cycle. Increasing network velocity enables a carrier to handle more freight with existing car capacity, while providing good customer service. Implicit in CSXT's comments is the suggestion that decreasing network velocity will lead to longer equipment cycle times, and thus, additional rail freight cars, not only for the PIH shipping industry, but non-PIH rail shippers as well.
22

22
CSXT references the present high demand for coal transportation and suggests that “productivity of utility companies' car fleets should be a national priority.”

Similar to CSXT's comments, CP asserts that DOT underestimated the costs of implementing the proposed 30 mph speed restriction. Specifically, CP analyzed the potential costs of implementing the restriction in two primary corridors of its network that include significant amounts of non-signaled track—approximately 430 miles of non-signaled track between Portal, ND and Glenwood, MN and approximately 266 miles of non-signaled track between Noyes, MN and Glenwood, MN. Assuming that the 30 mph speed restriction would apply to all trains carrying PIH shipments over these non-signaled line segments, CP determined that the proposed 30 mph speed limit would result in direct increased operating costs of $7 million per year (approximately $3.5 million in train miles costs and another $3.5 million in train re-crewing costs). Over the proposed eight year implementation period, these costs would total $56 million. Noting that DOT estimated in the RIA that the proposed restriction would cost the rail industry as a whole approximately $133.87 million over eight years (not including costs incurred by BNSF), CP expresses the view that its finding of a $56 million increase in operating costs for its two lines strongly suggests that the RIA's cost estimate substantially underestimated the potential economic burden that the restriction would impose on the rail industry.

CP further notes that in addition to the increased direct operating costs in the form of train miles and re-crewing costs, analysis indicated that the proposed 30 mph speed restriction would increase running time by five hours for all trains carrying PIH tank cars between Portal and Glenwood. This, CP asserts, would impact not only PIH shipments, but every other car moving in a train that was subject to the 30 mph restriction, and given the time-sensitive commodities moved on the CP lines at issue, could cause shippers of time-sensitive commodities to divert their shipments from CP's lines to motor carriers. Further, noting that installing a signal system on the Portal-Glenwood line would require a capital investment of $36-$71 million, with additional annual maintenance costs of $400,000-$800,000, CP asserts that eliminating the non-signaled lines within its network is cost prohibitive.

Putting aside the estimated impacts of the proposed interim 30 mph restriction, AAR and CP, in particular, assert that DOT did not adequately justify the proposed requirement. These commenters contend that DOT's analysis of 19 accidents since 1967 provides an insufficient basis for the proposed speed restriction because of the limited number of accidents considered, all of which involved chlorine or anhydrous ammonia tank cars breached due to head and shell punctures, cracks, or tears. Further, noting changes in the railroad operating environment since 1965, CP asserts that DOT's analysis “led it to make findings based on circumstances that no longer exist.” Noting the various mean and median speeds at which the 19 cited accidents occurred, these commenters also question DOT's proposed 30 mph threshold and instead suggest that a higher speed threshold may be more appropriate. CP estimates that the costs of imposing 30, 35, 40 and 45 mph speed restrictions in dark territory would result in cost increases relative to the revenue generated by PIH shipments of 27%, 16%, 8%, and 2%, respectively. Again, contending that this cost burden would impact not only the PIH shipping and receiving industries, but all rail customers, CP suggests that DOT consider alternatives to the proposed 30 mph dark territory speed restriction to improve the safety of railroad tank car PIH transportation.

Although DOT remains firmly convinced that reduced train speed in dark territory can be part of an interim strategy to mitigate the effects of train accidents in some instances, DOT is not adopting the 30 mph speed limitation in this final rule. In proposing the restriction, we envisioned it as a temporary measure with a foreseeable life span, for which potential impacts could reasonably be foreseen. As a result of DOT's decision to authorize the construction of interim cars that will not meet the performance standards proposed in the NPRM, and the expectation that these cars will have a useful life of at least two decades, estimating the potential impact of the 30 mph speed restriction is extremely difficult. Moreover, the time horizon within which the speed restrictions would remain in effect would be substantially expanded. Traffic continues to grow on the national rail system, even on many non-signaled rail lines. As capacity is constrained, the cost of any restriction on the speed of trains will markedly increase. Further, we are persuaded by the comments filed by CSXT (discussed above) that the introduction of speed-restricted cars could significantly upset its operating plan because of its inability to anticipate which trains would need to transport PIH cars on any given day and because of the ripple effects of delays.

Finally, DOT believes that the recently published final rule on routing of sensitive hazardous materials, including PIH shipments, provides a useful framework for better targeting risk reduction strategies.
23

The interim final rule requires rail carriers to analyze the safety and security risks of the routes currently used to transport certain high-risk hazardous materials, including PIH materials, and all available alternative routes. Rail carriers must use that analysis to select routes that pose the fewest overall safety and security risks. In addition, under authority granted in 49 U.S.C. 20502, DOT may require implementation of supportable risk reduction measures, including the installation of signal and train control systems. Taken together, these measures allow DOT and the railroads to develop ways to target and address excess risk in dark territory.

23
73 FR 72182 (Nov. 26, 2008).

In this rule, DOT is adopting the proposed overall 50 mph speed restriction for loaded PIH tank cars. Commenters are correct that we did not clearly state our intention to subject residue shipments to the 50 mph speed restriction in the NPRM; certainly, the supporting RIA did not account for the added costs that would result from the inclusion of residue shipments. While we continue to believe that residue shipments of PIH materials pose a safety risk that is directly related to the amount of material remaining in the tank, we note that the reduced product load may contribute to somewhat less frequent releases than from fully loaded cars, stemming in part from the reduced mass of the car, and that the consequences of an accident involving a residue shipment will generally be less severe than the consequences of an accident involving a fully loaded car. For these reasons, we agree with commenters that the costs associated

with imposing the overall speed restriction on residue shipments would likely outweigh any safety benefits. Therefore, in this rule we are not adopting the overall 50 mph speed restriction for tank cars containing residues of PIH materials. We encourage railroads to apply the overall 50 mph speed restriction to residue shipments where such application is feasible and practicable.

E. PIH Tank Car Top Fittings

Noting ongoing government and industry research efforts to develop consensus-based industry standards for enhanced tank car top fittings protection, in the NPRM we did not propose to revise current requirements for tank car top fittings.
24

Specifically, we stated that adopting new standards (by rulemaking or otherwise) for top fittings protection would be inappropriate because it was not yet clear what modifications would provide a substantial improvement in the ability of top fittings to: (1) Withstand accident conditions, while providing at least the same level of protection from non-accident releases; (2) continue to work with industry's existing loading and unloading infrastructure; and (3) maintain compatibility with current emergency response requirements (
e.g.
, compatibility with Emergency Kit C, which is used to contain leaks in and around the pressure relief device and valves in the case of chlorine cars). 73 FR 17840. In the NPRM, we also noted that although incidents involving tank car top fittings do occur, historical accident data demonstrate that top fittings are not a significant factor in the risk associated with large product losses.
Id.

24

See
73 FR 17840. The existing regulatory requirements for top fittings are found at 49 CFR 179.100-12.

Several commenters express disagreement with our conclusions and suggest that we incorporate improved top fittings standards in a final rule addressing enhanced tank car specifications. For example, BNSF asserts that “[t]op fittings protection needs to be addressed by DOT, either specifically in the requirements of the Final Rule or by including or formally recognizing the industry's interchange standards in the Final Rule.” BNSF cites a May 17, 2008 derailment in Lafayette, Louisiana, resulting in the release of over 8,000 gallons of hydrochloric acid when a tank car's top fittings were sheared off. The release resulted in the mandatory evacuation of several thousand residents. BNSF notes that although hydrochloric acid is not a PIH material, a tank car containing a PIH material was next to the derailed hydrochloric acid tank car in the consist.

Noting DOT's stated reliance on an analysis of 14 chlorine tank car releases between 1965 and 2005, with one release of 1,000 gallons,
25

AAR asserts that “DOT can hardly minimize the significance of a loss of 1,000 gallons * * * when it has just issued an interim final rule addressing the routing of TIH materials where it bases a decision to regulate on the potential for a release from tank cars containing 320 gallons or less.”
See
74 FR 20752, 20758 (Apr. 16, 2008). AAR further notes that according to the Railroad Tank Car Safety Research and Test Project's analysis of lading losses, losses from the top fittings account for 20 percent of 135 releases from pressure cars in mainline accidents where five percent or more of the lading was released;
26

in AAR's words, “hardly an insignificant percentage.” In its comments to the docket, AAR urges us to adopt the top-fittings standard of CPC-1187.
27

AAR notes that the AAR Tank Car Committee has already approved two designs meeting both the CPC-1187 standard and DOT standards, and that a third design meeting the CPC-1187 standard is authorized under a DOT special permit.

25
73 FR 17840.

26
AAR cites the Railroad Tank Car Safety Research and Test Project, “Safety Performance of Tank Cars in Accidents: Probabilities of Lading Loss,” RA-05-02, p. 30 (Jan. 2006).

27
The top fittings standard proposed in the Joint Petition discussed above is the top fittings standard of CPC-1187.

Another commenter, TGO Technologies, Inc., suggests that any new tank car design must include secondary containment of the manway. TGO asserts that measures such as lowering the profile of the valves, installing a roll bar, welding the protective housing to the pressure plate (as opposed to bolting it), and similar measures, may provide “some protection” against releases, but not equal to what a passive secondary containment system could provide. Although DOT understands the value of secondary containment systems in certain situations, we do not believe that reliance on such systems would be appropriate in attempting to increase the crashworthiness of railroad tank cars transporting PIH materials.

Recognizing that since publication of the NPRM, industry has developed several improved top fittings designs,
28

and in response to commenters' suggestions that we address top fittings, in this rule DOT is modifying requirements in the HMR applicable to PIH tank car top fittings. The specific modifications adopted are discussed in more detail in the section by section analysis of § 179.102-3 below.

28
Although some of these designs are still undergoing service trials, each have been found to improve the ability of the fittings to withstand accident conditions (and not adversely affect the potential for non-accident releases), work with industry's existing loading and unloading practices, and maintain compatibility with current emergency response equipment.

F. The Need for an Interim Standard for Tank Cars Used To Transport PIH Materials

PIH shippers that submitted comments on the NPRM note that, unlike other railroad freight cars, hazardous materials tank cars are primarily owned or leased by shippers, not the railroads. The overwhelming majority of these commenters recommend that DOT adopt an interim tank car standard, with an appropriate grandfathering period for tank cars meeting such standard, as a solution to ensure the availability of PIH tank cars in the time period before DOT's proposed performance standards are finalized and tank cars can be built to meet those standards. PIH shippers explain that obtaining new or leased PIH tank cars at the present time is very difficult, if not impossible. Commenters note that, subsequent to publication of the NPRM, AAR renewed its previously suspended interchange standard (Casualty Prevention Circular 1187 or CPC-1187) for tank cars transporting PIH materials.
29

Although the tank car head and shell requirements of CPC-1187 can be met by using DOT specification tank cars of higher tank classes than required by DOT standards, tank cars built to meet the CPC-1187 standard would not meet the performance standards proposed in the NPRM. Commenters express concern that the tank cars could not be retrofitted to meet any final DOT standard because of the weight of the cars. Coupled with the general consensus of the tank car industry that the tank head and shell puncture resistance performance requirements proposed in the NPRM are “technology-forcing,” commenters assert that the tank car market is effectively frozen. According to these commenters, shippers and other tank car purchasers (
e.g.
, tank car lessors) cannot purchase PIH tank cars with any assurance that the cars will have a reasonable economic life. According to these commenters, this uncertainty

encourages lessors to delay purchases or to exit the market altogether, in either case leading to the delayed phase-out of aging tank cars that would normally be replaced with newer, safer cars and, potentially, a shortage of PIH tank cars.

29
CPC-1187 is discussed in detail in the preamble to the NPRM. 73 FR 17832-17833 and in AAR's comments responding to the NPRM.
See
document no. 79 in the docket.

Several commenters suggest specific interim solutions. Some recommend that DOT grandfather existing PIH tank cars under any final rule. Others recommend that DOT grandfather tank cars constructed to meet the standards of CPC-1187, assuring purchasers of these tank cars that the cars will be afforded a reasonable economic useful life. Commenters suggest grandfathering periods from 15-50 years.

For example, Dow suggests an interim chlorine tank car utilizing a current 105J600W car with full-height head shields, 1.1360 inch head thickness and 0.9819 inch shell thickness; or an enhanced 105J500W car with full-height head shields, and with head, head shield and jacket thickness to achieve an equivalent level of puncture resistance as the enhanced 105J600W, or any alternative design that can be demonstrated to achieve an equivalent puncture resistance. Similarly, Dow suggests an interim ethylene oxide car utilizing a 105J500W car with full-height head shields, 1.0300 inch head thickness and 0.8900 inch shell thickness; or an enhanced 105J300W or 105J400W car with full-height head shields, and with head, head shield and jacket thickness to achieve an equivalent level of puncture resistance as the enhanced 105J500W, or any alternative design that can be demonstrated to achieve an equivalent puncture resistance. Dow recommends that any such interim car be authorized for its intended service for at least 25 years from its original build date.

The Ethylene Oxide/Ethylene Glycols Panel of the Ethylene Oxide Safety Task Group of the ACC recommends a retrofit approach to an interim ethylene oxide tank car. Specifically, this Task Group suggests an interim standard for ethylene oxide tank cars complying with at least the 105J300W specification, insulated tanks and protected with an outer steel jacket at least 0.375 inches thick and constructed of steel similar to TC128B. The Task Group further proposes that a tank car meeting such interim standard be authorized for ethylene oxide service for 50 years from its original construction.

In addition to these specific suggestions for interim tank car standards, as noted in the “Background” section above, industry participants filed two petitions requesting that the Department amend the HMR to authorize interim standards for tank cars transporting PIH materials. The Joint Petition, filed by ACC, ASLRRA, AAR, CI and RSI (Petitioner Group) seeks DOT approval of interim rail tank car standards that could be met in three different ways. First, the Joint Petition contemplates a commodity-specific scaled step up in the DOT specification tank car used to transport PIH commodities. In other words, the Joint Petition proposes that where the HMR currently require a 105*300W car (DOT specification tank car authorized for transportation of chlorine) or 112*340W car (DOT specification tank car authorized for transportation of anhydrous ammonia), as a stepped improvement, the proposed interim standard would require a 105J500W or 112J500W car,
30

with a minimum head and shell thickness of
13/16
inches and a full-height
1/2
-inch thick or equivalent head shield. Similarly, the Joint Petition proposes that where the HMR currently require a 105*500W or 105*600W tank car, as a stepped improvement, the proposed interim standard would require a 105J600W car, with a minimum head and shell thickness of
15/16
inches and full-height
1/2
-inch thick or equivalent head shield.

30
A DOT class 112 car differs from a DOT class 105 car in that it is not insulated.

Second, the Joint Petition contemplates an alternative performance standard based on the CPR metric discussed above. This alternative performance standard utilizes relative probabilities that conventional tank cars and tank cars with thicker tanks will release hazardous materials in an accident. In the Joint Petition, this relative comparison between two conditional probabilities is referred to as the “Tank Improvement Factor” (TIF). The Joint Petition contains a table showing the TIF for 25 PIH materials commonly transported by railroad tank car.

Third, the Joint Petition requests that DOT allow alternative methodologies to demonstrate improvement equivalent to the TIF calculation.

The Joint Petition proposes a specific design standard for chlorine tank cars, which Petitioners assert would achieve the desired CPR improvement. The initial chlorine tank car design standard proposed was a 105J500W tank car with a head, shell, jacket, and head shield, 0.777 inch thick, 0.777 inch thick, 0.375 inch thick, and a 0.625 inches thick, respectively. In comments submitted on July 25, 2008, the Petitioner Group modified the proposed chlorine design standard to a 105J500W tank car with a total head and head shield thickness of 1.636 inches and a total shell and jacket thickness of 1.102 inches. Both proposed design standards specified that the jacket be constructed of steel with a minimum tensile strength of 70 ksi and minimum elongation in two inches of 21%.

The Joint Petition also proposes a top fittings protection standard that would require top fittings to be designed to withstand, without loss of lading, a rollover with a linear velocity of nine mph. Noting that the HMR currently mandate that the top fittings protection system be bolted to the tank, the Joint Petition suggests that the 9 mph rollover standard necessitates, instead, that the top fittings protection system be attached to the tank by welding. This top fittings arrangement is consistent with CPC-1187's requirement.

Finally, the Joint Petition proposes that DOT grandfather tank cars built to meet the proposed standards for 25 years after the effective date of the final rule in this docket.

In its petition, TFI expresses support for many aspects of the Joint Petition, but also contends that the unique characteristics of its members' fleets of anhydrous ammonia tank cars necessitate special consideration by DOT. Noting the safety features of the typical anhydrous ammonia tanks cars currently in service, DOT112J340W tank cars, TFI proposes that these cars remain in production until January 1, 2009 and proposes set useful lives of these cars of approximately 20-25 years. As an interim car to be manufactured starting January 1, 2009 until cars are available under any DOT final performance standard, TFI proposes DOT 112J400 pound cars with thicker jackets and a guaranteed useful life of 25 years from the date of a final rule in this docket.

DOT agrees with commenters' assertions that an interim solution is necessary. Accordingly, this rule amends the HMR by specifying enhanced commodity-specific design standards for PIH tank cars constructed after March 16, 2009. The standards specified are based on existing DOT specification cars and modified top fitting designs developed by industry since publication of the NPRM. This rule provides for a 20-year expected PIH service life of tank cars meeting these interim standards. As noted above, this rule is an interim solution to the market issues identified by commenters. DOT intends to move forward as expeditiously as possible with the development and validation of an enhanced performance standard for PIH tank cars, and the incorporation of such enhanced standard into the HMR.

Although as noted in section A above, we have not adopted the exact standards proposed by AAR and the Petitioner Group, we utilized the Group's basic framework of proposed specifications to develop a more direct and less cumbersome means of demonstrating the performance of alternative tank car designs, which takes into consideration the physics that tank cars experience during accidents, derailments, and other types of rail incidents. This methodology results in interim standards generally consistent with that proposed by both the Petitioner Group and TFI.
31

31
In its petition, TFI further suggests an accelerated phase-out of pre-1989 tank cars constructed utilizing non-normalized steel by December 31, 2010. Although we have not adopted this proposal, as noted in section IV.B and discussed in more detail in the section-by-section analysis of § 173.31, this rule does require rail car owners that retire or remove rail tank cars from PIH service to prioritize the retirement or removal of pre-1989 non-normalized steel cars. In addition, we note that this rule addresses only PIH tank cars constructed after March 16, 2009 and cars built to meet the standards set forth in this rule. This rule does not limit the PIH service life of existing PIH tank cars meeting the requirements of the HMR prior to this rule's effectiveness.

V. Discussion of Comments on Petitions for Interim Tank Car Standards

On July 23, 2008, PHMSA published the petitions submitted by the Petitioner Group and TFI and requested comments on their merits (73 FR 42765). Approximately 20 persons submitted comments, including industry associations, PIH shippers and receivers, a tank car manufacturing and repair company, the American Association for Justice, and representatives of local governments and emergency response teams. Although most commenters reiterate their support for DOT's development of a performance standard as proposed in the NPRM, the overwhelming majority of commenters express support for the development of interim PIH tank car standards with an accompanying grandfather period. For example, Dow supports both the Joint Petition and TFI's petition and suggests that an interim final rule for PIH tank cars should include (1) tank car safety improvements “based upon currently available and proven construction materials, design concepts and technologies”; and (2) a reasonable economic life for tank cars built during the interim period. Similarly, Olin's Chlor Alkali Products Division suggests that adoption of the interim standard in the Joint Petition would lead to immediate safety improvements and make it economically viable for tank car owners to replace existing tank cars at the end of their useful lives with newer, safer cars, thereby ensuring shippers would have access to adequate PIH tank cars to meet service needs. PPG expresses support for the Joint Petition and asserts that interim standards are necessary to provide alternatives for tank car designs that would ensure the continued safe shipment of chlorine and allow for a design that can be retrofitted in the future to meet any final performance standard.

One commenter, DuPont, contends that the Joint Petition's proposal is “far too generic and does not adequately address the crashworthiness and commodity-specific requirements for tank car design.” DuPont suggests that the TIF contemplated in the Joint Petition is “not a true indicator” of a tank car's crashworthiness and that a “strictly probabilistic approach,” such as the CPR metric proposed in the Joint Petition is not appropriate. Further, DuPont suggests that each PIH commodity must be considered individually as interim performance standards are developed.

As discussed in Section IV.A of this preamble and the Section-by-Section analysis of § 173.244, we agree that the purely statistical analysis of CPR is not the best metric for measuring the effectiveness of tank car improvements. We also appreciate DuPont's concerns regarding the commodity-specific requirements for tank car design. Accordingly, in this rule we have adopted commodity-specific design standards for PIH tank cars based on existing DOT specification cars. We recognize that as a result of the differing physicochemical properties of certain PIH commodities, such as chlorosulfonic acid and anhydrous hydrogen fluoride, unique tank car designs have developed over time and are currently authorized by special permit. We do not intend to supplant those special permits with this rule. Shippers may continue use of the existing tank cars under these special permits. Additionally, the special permit process provides for the development and authorization of alternative tank car designs as contemplated by the Joint Petition. Specifically, the special permit process enables tank car owners and manufacturers to develop variations in tank car designs, using materials and techniques that are not currently authorized. We anticipate that shippers and tank car manufacturers will continue to perform safety equivalency evaluations and submit special permit applications to address variations in tank car designs for particular materials.

Although we agree with DuPont's suggestion that a performance standard should be the ultimate goal of any effort to specify tank car improvements, we do not believe that such a standard is necessary to achieve the purposes of this interim rule. Instead, we believe the commodity-specific design standards based on existing DOT specification cars provides a commercially feasible and effective method of improving the accident survivability of PIH tank cars in the near term. As noted earlier in this document, this rule is the first part of a longer-term strategy to enhance the safety of rail shipments of PIH materials. We plan to continue to develop and validate performance standards that further improve the crashworthiness of PIH tank cars.

As discussed above, the Joint Petition also proposes a top fittings protection standard that would require top fittings to be designed to withstand, without loss of lading, a rollover with a linear velocity of nine mph and permit top fittings protection system to be attached to the tank by welding. In its comments, DuPont expresses concern about the proposed top fittings protection standard, stating that inspections of similar designs have shown that corrosion can develop in welded protective housings and that such corrosion could impact the structural integrity of the housing, reducing its effectiveness in the event of a rollover. DuPont notes that it is “aware of no data analyzing the impact of the corrosion risk on the overall integrity of the housing (and related impact on overall tank car safety) as compared to the current bolted housing design.” As noted in the section-by-section analysis of § 179.102-3 below, we share DuPont's concern regarding the welding of the top fittings protective housing to the tank, and accordingly, we have not adopted this aspect of the Joint Petition.

Several anhydrous ammonia shippers and receivers submitted comments supporting the TFI petition, including its proposal to permit cars currently used to transport anhydrous ammonia to remain in service for 20-25 years. Although we appreciate TFI's desire for assurance as to a guaranteed PIH service life of its existing anhydrous ammonia fleet, such assurance is outside the scope of this rule. This rule addresses only PIH tank cars constructed after March 16, 2009 and cars built to meet the standards set forth in this rule. This rule does not limit the PIH service life of existing PIH tank cars meeting the requirements of the HMR prior to this rule's effective date nor does it provide a guaranteed PIH service life for the existing fleet. The issue of

grandfathering the existing PIH tank car fleet will be addressed with DOT's promulgation of a final performance standard.

In its petition, TFI proposes an interim standard for anhydrous ammonia cars that would incorporate the current DOT 112J400 pound cars with thicker jackets to enhance accident survivability. We agree that a 112J400W car with a thicker jacket and head will provide a significant safety improvement over existing 112J340W cars. Accordingly, this rule specifies that newly constructed cars designed for anhydrous ammonia service must meet the 105J500I or 112J500I specifications, and also authorizes a 400 pound car, as proposed by TFI, with a thicker jacket and head.

VI. Summary of Rule

This rule prescribes enhanced safety measures for rail transportation of PIH materials, including improvements in the safety features of DOT specification tank cars. Pending further validation and implementation of the crashworthiness performance standard proposed in the NPRM, this rule amends the HMR to prescribe enhanced commodity-specific design standards for PIH tank cars based on existing DOT specifications. The amendments require that shell and/or jacket thickness be increased for each commodity and that full head shields be used where not already required. The increases in package crashworthiness are generally scaled in the same manner as previous DOT specifications, and the general intent is that the increases in package robustness be accommodated within a gross weight on rail limitation of 286,000 pounds. This rule adds new engineering analysis to support adding thickness to the head shield and jacket. Additionally, this rule puts in place new requirements for enhancement of top fittings protection systems and nozzle arrangements. This rule also implements a proposed 50 mph speed limit for all loaded, placarded rail tank cars used to transport PIH materials.

As discussed above, this rule will not implement the proposed interim 30 mph speed limit in dark territory for tank cars transporting PIH materials that do not meet the proposed enhanced performance requirements. In addition, in response to comments, this rule does not implement the proposed expedited replacement requirement for PIH tank cars manufactured before 1989 with non-normalized steel head or shell construction as proposed. Instead this rule requires that tank car owners prioritize retirement or replacement of pre-1989 non-normalized steel cars when retiring or removing cars from PIH materials service.

As stated above, although DOT believes that this rule incrementally improves the crashworthiness protection of newly manufactured tank cars designed for the transportation of PIH materials, DOT intends that the standards set forth in this rule apply on an interim basis, until such time as final performance standards are developed and tank cars are available meeting such standards. DOT believes that PIH tank cars built to the final performance standards will be significantly safer than cars built to these interim standards. Accordingly, DOT does not intend that the entire PIH tank car fleet be replaced with cars meeting these interim requirements.
32

To the contrary, beyond the numbers necessary to meet new business demands and to replace cars that are damaged or have reached the end of their service lives, acquisition of cars meeting the interim standards will tend to diminish potential safety benefits by delaying the introduction of cars built to the final performance standards. Instead, DOT expects that tank car owners will acquire cars meeting these interim standards to replace existing PIH tank cars that are retired, scrapped, damaged, or otherwise taken out of service in the normal course of operations and to meet new business needs, only as necessary to efficiently and safely manage their PIH tank car fleets pending the development and implementation of final performance standards addressing the crashworthiness of PIH tank cars.

32
As noted in the Regulatory Impact Analysis accompanying this rule, DOT estimates that the fleet of interim PIH tank cars will at most represent approximately 14% of the total PIH tank car fleet (roughly 2,044 tank cars).

VII. Section-by-Section Analysis

Part 171

Section 171.7—Reference Material

This section addresses reference materials that are incorporated by reference into the HMR. In the NPRM, we proposed to allow an increase in the gross weight on rail of tank cars to 286,000 pounds and accordingly, we proposed to amend § 171.7(a)(3), the table of material incorporated by reference, to add the entry for AAR Standard S-286-2002, Specification for 286,000 lbs. Gross Rail Load Cars for Free/Unrestricted Interchange Service, revised as of 2005. Subsequently, FRA learned that AAR revised Standard S-286-2002 in 2006 and renamed the standard “S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail Load Cars”. AAR Standard S-286 is the existing industry standard for designing, building, and operating rail cars at gross weights between 263,000 pounds and 286,000 pounds. As discussed in the analysis of § 179.13, in this rule we are adopting the proposal to allow an increase in the gross weight on rail of tank cars. Accordingly, we are adopting the proposal to incorporate the AAR Standard, only revising the rule text to incorporate the most recent version of the Standard. By incorporating the standard into the HMR, we will ensure that tank cars exceeding the existing 263,000 pound limitation and weighing up to 286,000 pounds gross weight on rail are mechanically and structurally sound.

Part 172

The Hazardous Materials Table in § 172.101 is amended to consolidate and update the special provisions applicable to the rail tank car transportation of PIH materials. The revisions to the table are for ease of reference only and do not substantively change the requirements

[Text truncated at 120,000 characters. The full text is on the page linked above.]

---

Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3AE8-31056. Public record. Not legal advice.
