# National Emission Standards for Hazardous Air Pollutants for Area Sources: Acrylic and Modacrylic Fibers Production, Carbon Black Production, Chemical Manufacturing: Chromium Compounds, Flexible Polyurethane Foam Production and Fabrication, Lead Acid Battery Manufacturing, and Wood Preserving > Briefs, arguments, decisions, and more. URL: https://www.frixlaw.com/law-library/documents/fr%3AE7-12018 ## Record - **Collection:** Federal Register - **Document type:** Rule - **Published:** July 16, 2007 - **Citation:** 72 FR 38864 ## Text ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 63 [EPA-HQ-AR-2006-0897; FRL-8330-1] RIN 2060-AN44 National Emission Standards for Hazardous Air Pollutants for Area Sources: Acrylic and Modacrylic Fibers Production, Carbon Black Production, Chemical Manufacturing: Chromium Compounds, Flexible Polyurethane Foam Production and Fabrication, Lead Acid Battery Manufacturing, and Wood Preserving AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: EPA is issuing six national emissions standards for hazardous air pollutants for seven area source categories. The final emissions standards and associated requirements for two area source categories (Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication) are combined in one subpart. These final rules include emission standards that reflect the generally available control technologies or management practices in each of these area source categories. DATES: These final rules are effective on July 16, 2007. The incorporation by reference of certain publications listed in these rules is approved by the Director of the Federal Register as of July 16, 2007. ADDRESSES: The EPA has established a docket for this action under Docket ID No. EPA-HQ-OAR-2006-0897. All documents in the docket are listed in the Federal Docket Management System index at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g. , confidential business information or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available either electronically through www.regulations.gov or in hard copy at the EPA Docket Center, Public Reading Room, EPA West, Room 3334, 1301 Constitution Ave., NW., Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is (202) 566-1744, and the telephone number for the Air Docket is (202) 566-1742. FOR FURTHER INFORMATION CONTACT: Ms. Sharon Nizich, Sector Policies and Programs Division, Office of Air Quality Planning and Standards (D243-02), Environmental Protection Agency, Research Triangle Park, North Carolina 27711, telephone number: (919) 541-2825; fax number: (919) 541-3207; e-mail address: nizich.sharon@epa.gov. SUPPLEMENTARY INFORMATION: Outline. The information presented in this preamble is organized as follows: I. General Information A. Does this action apply to me? B. Where can I get a copy of this document? C. Judicial Review II. Background Information for Final Area Source Standards III. Summary of Final Rules and Changes Since Proposal A. NESHAP for Acrylic and Modacrylic Fibers Production Area Sources B. NESHAP for Carbon Black Production Area Sources C. NESHAP for Chemical Manufacturing Area Sources: Chromium Compounds D. NESHAP for Flexible Polyurethane Foam Production and Fabrication Area Sources E. NESHAP for Lead Acid Battery Manufacturing Area Sources F. NESHAP for Wood Preserving Area Sources IV. Exemption of Certain Area Source Categories from Title V Permitting Requirements A. Acrylic and Modacrylic Fibers Production B. Flexible Polyurethane Foam Production and Fabrication C. Lead Acid Battery Manufacturing D. Wood Preserving V. Summary of Comments and Responses A. Basis for Area Source Standards B. Proposed NESHAP for Acrylic and Modacrylic Fibers Production Area Sources C. Proposed NESHAP for Carbon Black Production Area Sources D. Proposed NESHAP for Chemical Manufacturing Area Sources: Chromium Compounds E. Proposed NESHAP for Flexible Polyurethane Foam Production and Fabrication Area Sources F. Proposed NESHAP for Lead Acid Battery Manufacturing Area Sources G. Proposed NESHAP for Wood Preserving Area Sources H. Proposed Exemption of Certain Area Source Categories from Title V Permitting Requirements I. Compliance with Executive Order 13045: Protection of Children from Environmental Health and Safety Risks J. Compliance with Executive Order 12898: Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations VI. Statutory and Executive Order Reviews A. Executive Order 12866: Regulatory Planning and Review B. Paperwork Reduction Act C. Regulatory Flexibility Act D. Unfunded Mandates Reform Act E. Executive Order 13132: Federalism F. Executive Order 13175: Consultation and Coordination with Indian Tribal Governments G. Executive Order 13045: Protection of Children from Environmental Health and Safety Risks H. Executive Order 13211: Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use I. National Technology Transfer Advancement Act J. Executive Order 12898: Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations K. Congressional Review Act I. General Information A. Does this action apply to me? The regulated categories and entities potentially affected by these final standards include: Category NAICS code 1 Examples of regulated entities Industry: Acrylic and modacrylic fibers production 325222 Area source facilities that manufacture polymeric organic fibers using acrylonitrile as a primary monomer. Carbon black production 325182 Area source facilities that manufacture carbon black using the furnace, thermal, or acetylene decomposition process. Chemical manufacturing: chromium compounds 325188 Area source facilities that produce chromium compounds, principally sodium dichromate, chromic acid, and chromic oxide, from chromite ore. Flexible polyurethane foam production 326150 Area source facilities that manufacture foam made from a polyurethane polymer. Flexible polyurethane foam fabrication operations 326150 Area source facilities that cut or bond flexible polyurethane foam pieces together or to other substrates. Lead acid battery manufacturing 335911 Area source facilities that manufacture lead acid storage batteries made from lead alloy ingots and lead oxide. Wood preserving 321114 Area source facilities that treat wood such as lumber, ties, poles, posts, or pilings with a preservative. 1 North American Industry Classification System. This table is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. To determine whether your facility is regulated by this action, you should examine the applicability criteria in 40 CFR 63.11393 of subpart LLLLLL (NESHAP for Acrylic and Modacrylic Fibers Production Area Sources), 40 CFR 63.11400 of subpart MMMMMM (NESHAP for Carbon Black Production Area Sources), 40 CFR 63.11407 of subpart NNNNNN (NESHAP for Chemical Manufacturing Area Sources: Chromium Compounds), 40 CFR 63.11414 of subpart OOOOOO (NESHAP for Flexible Polyurethane Foam Production and Fabrication Area Sources), 40 CFR 63.11421 of subpart PPPPPP (NESHAP for Lead Acid Battery Manufacturing Area Sources), or 40 CFR 63.11428 of subpart QQQQQQ (NESHAP for Wood Preserving Area Sources). If you have any questions regarding the applicability of this action to a particular entity, consult either the air permit authority for the entity or your EPA regional representative as listed in 40 CFR 63.13 of subpart A (General Provisions). B. Where can I get a copy of this document? In addition to being available in the docket, an electronic copy of this final action will also be available on the Worldwide Web (WWW) through the Technology Transfer Network (TTN). Following signature, a copy of this final action will be posted on the TTN's policy and guidance page for newly proposed or promulgated rules at the following address: http://www.epa.gov/ttn/oarpg/. The TTN provides information and technology exchange in various areas of air pollution control. C. Judicial Review Under section 307(b)(1) of the Clean Air Act (CAA), judicial review of these final rules is available only by filing a petition for review in the U.S. Court of Appeals for the District of Columbia Circuit by September 14, 2007. Under section 307(d)(7)(B) of the CAA, only an objection to these final rules that was raised with reasonable specificity during the period for public comment can be raised during judicial review. Moreover, under section 307(b)(2) of the CAA, the requirements established by these final rules may not be challenged separately in any civil or criminal proceedings brought by EPA to enforce these requirements. II. Background Information for Final Area Source Standards Section 112(k)(3)(B) of the CAA requires EPA to identify at least 30 hazardous air pollutants (HAP), which, as the result of emissions of area sources, 1 pose the greatest threat to public health in urban areas. Consistent with this provision, in 1999, in the Integrated Urban Air Toxics Strategy, EPA identified the 30 HAP that pose the greatest potential health threat in urban areas, and these HAP are referred to as the “Urban HAP.” See 64 FR 38715, July 19, 1999. Section 112(c)(3) requires EPA to list sufficient categories or subcategories of area sources to ensure that area sources representing 90 percent of the emissions of the 30 Urban HAP are subject to regulation. EPA listed the source categories that account for 90 percent of the Urban HAP emissions in the Integrated Urban Air Toxics Strategy. 2 Sierra Club sued EPA, alleging a failure to complete standards for the area source categories listed pursuant to CAA sections 112(c)(3) and (k)(3)(B) within the time frame specified by the statute. See Sierra Club v. Johnston , No. 01-1537 (D.D.C.). On March 31, 2006, the court issued an order requiring EPA to promulgate standards under CAA section 112(d) for those area source categories listed pursuant to CAA section 112(c)(3). 1 An area source is a stationary source of hazardous air pollutant (HAP) emissions that is not a major source. A major source is a stationary source that emits or has the potential to emit 10 tons per year (tpy) or more of any HAP or 25 tpy or more of any combination of HAP. 2 Since its publication in the Integrated Urban Air Toxics Strategy in 1999, EPA has revised the area source category list several times. Among other things, the order requires that, by June 15, 2007, EPA complete standards for six area source categories. On April 4, 2007, we proposed NESHAP for the following seven listed area source categories that we have selected to meet the June 15, 2007 deadline: (1) Acrylic and Modacrylic Fibers Production; (2) Carbon Black Production; (3) Chemical Manufacturing: Chromium Compounds; (4) Flexible Polyurethane Foam Production; (5) Flexible Polyurethane Foam Fabrication Operations; (6) Lead Acid Battery Manufacturing; and (7) Wood Preserving. See 72 FR 16632. These final NESHAP complete the required regulatory action for seven area source categories. Under CAA section 112(d)(5), the Administrator may, in lieu of standards requiring maximum achievable control technology (MACT) under section 112(d)(2), elect to promulgate standards or requirements for area sources “which provide for the use of generally available control technologies or management practices by such sources to reduce emissions of hazardous air pollutants.” As explained in the proposed NESHAP, we are setting standards for these seven area source categories pursuant to section 112(d)(5). See 72 FR 16638, April 7, 2007. III. Summary of Final Rules and Changes Since Proposal This section summarizes the final rules and identifies and discusses changes since proposal. For changes that were made as a result of public comments, we have provided detailed explanations of the changes and the rationale in the responses to comments in section V of this preamble. A. NESHAP for Acrylic and Modacrylic Fibers Production Area Sources 1. Applicability and Compliance Dates This final rule applies to any existing or new acrylic or modacrylic fibers production plant that is an area source of HAP. The owner or operator of an existing area source must comply with all the requirements of this area source NESHAP by January 16, 2008. The owner or operator of a new area source must comply with this area source NESHAP by July 16, 2007 or upon initial startup, whichever is later. 2. Emissions Standards The Acrylic and Modacrylic Fibers Production area source category was listed pursuant to section 112(c)(3) for its contribution of the Urban HAP acrylonitrile (AN). In response to comments, we have revised the proposed AN requirements for existing area sources to include a new compliance alternative. We have also revised the compliance provisions for existing area sources to allow facilities to change the operating limits for a wet scrubber control device. Existing area sources. The final standards for existing area sources apply to emissions from the control devices for polymerization and monomer recovery process equipment, spinning lines at plants that do not have a monomer recovery process, and AN storage tanks. As proposed, we are adopting the State permit requirements applicable to the one existing area source as the NESHAP for existing acrylic and modacrylic fibers production area sources. No changes have been made since proposal to the AN emissions limits for control devices for polymerization and monomer recovery process equipment. The AN emissions limit for the control device for polymerization process equipment is 0.2 pound per hour (lb/hr). The AN emissions limit for the control device for monomer recovery process equipment is 0.05 lb/hr. In response to comments, we have revised the proposed rule to include an alternative compliance option for existing area sources. The new compliance option in § 63.11395(b)(3) allows an existing area source to comply with the same requirements that apply to process vents for new area sources. Although the two requirements are expressed in different units, they provide an equivalent level of control. No changes have been made since proposal to the control device parameter operating limits for wet scrubbers. The daily average water flow rate to the wet scrubber control device for polymerization process equipment must not drop below 50 liters per minute (l/min). For the wet scrubber control device for monomer recovery process equipment, the daily average water flow rate must not drop below 30 l/min. We have revised the proposed standard to include procedures for changing the operating limits based on the results of a performance test. These procedures are contained in § 63.11395(k). As explained in the proposed rule, this rule does not include requirements for spinning lines for existing sources that remove residual AN using a monomer recovery process prior to spinning. As proposed, existing sources that do not have a monomer recovery process prior to spinning must meet the requirements for spinning lines in 40 CFR part 63, subpart YY. Acrylonitrile storage tanks meeting certain capacity/vapor pressure conditions must comply with one of three control options: (1) A fixed roof in combination with an internal floating roof, (2) an external floating roof, or (3) a closed vent system and control device. In response to comments, we are clarifying in the final rule that process and maintenance wastewater containing AN must be treated in a wastewater treatment system. We are deleting the definition of “wastewater” because we have specifically defined “process wastewater” and “maintenance wastewater.” New area sources. No changes have been made to the proposed emissions standards for new area sources. The final standards apply to process vents, fiber spinning lines, AN storage tanks, process wastewater, maintenance wastewater, and equipment leaks. The process vent requirements apply to each vent stream with an AN concentration of 50 parts per million by volume (ppmv) or greater and a flow rate of 0.005 cubic meters per minute or greater. The owner or operator must control AN emissions from process vents meeting this threshold by reducing uncontrolled emissions by 98 weight percent or meeting an emissions limit of 20 ppmv by venting vapors through a closed vent system to a recovery device, control device, or flare. The owner or operator must determine which process vents meet the threshold noted above by using the procedures and methods in § 63.1104 of subpart YY. The emissions limits for fiber spinning lines require the owner or operator to: (1) Reduce AN emissions by 85 weight-percent (e.g., by venting emissions from a total enclosure through a closed vent system to a control device that meets the requirements in 40 CFR part 63, subpart SS), (2) reduce AN emissions from the spinning line to 0.5 pounds of AN per ton (lb/ton) of acrylic and modacrylic fiber produced, or (3) reduce the AN concentration of the spin dope to less than 100 parts per million by weight (ppmw). The requirements in § 63.1103(b)(4) of subpart YY apply to an enclosure for a fiber spinning line. For all AN storage vessels at a new area source, the owner or operator must: (1) Reduce AN emissions by 98 weight-percent by venting emissions through a closed vent system to any combination of control devices as specified in § 63.982(a)(1) of subpart SS or reduce AN emissions by 95 weight-percent or greater by venting emissions through a closed system to a recovery device as specified in § 63.993 of subpart SS; or (2) comply with the equipment standards for internal or external floating roofs in 40 CFR part 63, subpart WW. Process wastewater and maintenance wastewater at new sources are subject to the requirements in § 63.1106(a) and (b) of subpart YY. We are clarifying that wastewater that contains AN but which is below the thresholds for control in subpart YY must be treated in a wastewater treatment system. The owner or operator is also required to comply with the equipment leak requirements in subpart YY. Subpart YY applies the requirements in either subpart TT or UU to equipment that contains or contacts 10 percent by weight or greater of AN and that operates at least 300 hours per year. 3. Compliance Requirements No significant changes have been made to the compliance provisions for existing sources. As proposed, we are including in this final NESHAP the monitoring, testing, recordkeeping, and reporting requirements in the State operating permit for the one existing area source. The only change since proposal is the addition of records of process and maintenance wastewater streams that are treated in a wastewater treatment system. Specifically, for existing sources, continuous parameter monitoring systems (CPMS) are required to measure and record the scrubber water flow rates at least every 15 minutes. The owner or operator of an existing source must determine compliance with the daily average operating limits for the scrubber water flow rates on a monthly basis and submit quarterly compliance reports to EPA or the delegated authority. Compliance with the operating limits is to be determined on a monthly basis; quarterly compliance reports also are required. The owner or operator must keep records of each monthly compliance determination and retain the records for at least 2 years following the date of each compliance determination. If the daily average water flow rate falls below the required operating limit, the owner or operator must submit a report to EPA or the delegated authority that identifies the exceedance; the owner or operator would be required to submit the report within 10 days of the exceedance. The owner or operator of an existing source must conduct a performance test for each control device for polymerization process equipment and monomer recovery process equipment. A performance test is not required for an existing source if a prior performance test has been conducted using the methods required by this rule, which are the requirements contained in § 63.1104 of subpart YY, and either no process changes have been made since the test, or the owner or operator can demonstrate that the results of the performance test, with or without adjustments, reliably demonstrate compliance despite process changes. For AN storage tanks at existing sources, the owner or operator must comply with the applicable testing, inspection, and notification procedures in 40 CFR 60.113b(a) and the recordkeeping and reporting requirements in 40 CFR 60.115b and 60.116b of subpart Kb. The testing, monitoring, recordkeeping, and reporting requirements in 40 CFR part 65, subpart C apply if the owner or operator elected to comply with the part 65 control option for AN storage tanks. See 40 CFR 60.110b(e). The owner or operator of an existing area source must comply with certain notification requirements in § 63.9 of the General Provisions (40 CFR part 63, subpart A). These requirements include a notification of applicability and a notification of compliance status. In the notification of compliance status required in 40 CFR 63.9(h), the owner or operator of an existing source may certify initial compliance with the emissions limits based on a previous performance test if applicable. We have revised the proposed certification of compliance for the emissions limit to include a certification for the new alternative compliance option for process vents. The owner or operator must also certify initial compliance with the NSPS requirements in 40 CFR part 60, subpart Kb. We are also requiring that the owner or operator of an existing source comply with the requirements for startup, shutdown, and malfunction (SSM) plans, reports, and records in 40 CFR 63.6(e)(3). As proposed, we are allowing additional time (6 months after promulgation) to allow for preparation of the plan. No changes have been made since proposal to the compliance provisions for new area sources. The owner or operator of a new area source must perform assessments 3 to identify affected process vents, equipment, and wastewater streams; conduct initial performance tests and/or compliance demonstrations; and comply with the monitoring, inspection, recordkeeping, and reporting requirements in each applicable subpart. For process vents, the owner or operator must comply with all testing, monitoring, recordkeeping, and reporting requirements in 40 CFR part 63, subpart SS. For other emissions sources, the owner or operator must comply with all testing, monitoring, recordkeeping, and reporting requirements in 40 CFR part 63, subpart SS or WW for AN tanks, and subpart TT or UU for equipment leaks. Only specified provisions in subpart G apply for process wastewater and maintenance wastewater. 3 These assessments are used to determine which process vents and wastewater streams must be controlled. The owner or operator of a new area source is also required to comply with the NESHAP General Provisions (40 CFR part 63, subpart A), including requirements for notifications; performance tests and reports; SSM plans and reports; recordkeeping, and reporting. We have identified in the final NESHAP the General Provisions of 40 CFR part 63 applicable to existing and new sources. B. NESHAP for Carbon Black Production Area Sources 1. Applicability and Compliance Dates The final NESHAP applies to each new or existing carbon black production facility that is an area source of HAP. The owner or operator of an existing affected source must comply with all the requirements of this area source NESHAP by July 16, 2007. The owner or operator of a new affected source must comply by July 16, 2007 or upon initial startup, whichever is later. 2. Emissions Standards The Carbon Black Production area source category was listed pursuant to section 112(c)(3) for regulation for its contribution of the Urban HAP POM (polycyclic organic matter). We have made no changes since proposal to the emissions standards for this source category. This final NESHAP requires the owner or operator of an existing or new source to control HAP emissions from each carbon black production main unit filter process vent that has a HAP concentration equal to or greater than 260 ppmv. The specific control requirements are: (1) Reduce emissions of HAP by using a flare meeting all the requirements of 40 CFR part 63, subpart SS; or (2) reduce total HAP emissions by 98 weight-percent or to a concentration of 20 ppmv, whichever is less, by venting emissions through a closed vent system to any combination of control devices meeting the requirements 40 CFR 63.982(a)(2). 3. Compliance Requirements We have made no changes to the proposed compliance provisions for carbon black production area sources. For existing and new area sources, we are adopting in this final NESHAP the testing, monitoring, recordkeeping, and reporting requirements in subpart YY. The owner or operator must demonstrate compliance with the emissions limit for existing and new area sources by monitoring the operating parameters of the control device or devices selected to comply with the requirements of the NESHAP. The owner or operator of an existing or new area source must comply with the subpart YY notification requirements in 40 CFR 63.1110. In the notification of compliance status required in 40 CFR 63.1110(d), the owner or operator of an existing source may demonstrate initial compliance with the emissions standards based on the results of a performance test that has been previously conducted provided certain conditions are met ( e.g. , using the same methods as the test methods in the final rule). As proposed, we are requiring that the owner or operator of an existing area source comply with the SSM requirements in 40 CFR 63.1111. Section 63.1111(a)(1) of subpart YY requires that the source include provisions for an SSM plan. C. NESHAP for Chemical Manufacturing Area Sources: Chromium Compounds 1. Applicability and Compliance Dates The final rule applies to the owner or operator of a new or existing area source that manufactures chromium compounds. The owner or operator of an existing area source must comply with all the requirements of this area source NESHAP by January 16, 2008. The owner or operator of a new affected source must comply by July 16, 2007 or upon initial startup, whichever is later. In response to comments, we have also added a definition of “chromium compounds manufacturing facility.” 2. Emissions Standards The Chemical Manufacturing: Chromium Compounds area source category was listed for regulation pursuant to section 112(c)(3) for its contribution of the Urban HAP chromium. We have not revised the emissions standards for this area source category since proposal. However, we have revised Table 1 of subpart NNNNNN to clarify the regulated process equipment. These changes include revising the title of Table 1 to refer to emissions sources instead of emissions points, changing the “filter for sodium chromate slurry” to “residue dryer system”, changing the “reactor used to produce chromic acid” to the “melter used to produce chromic acid”, and removing the “sodium evaporation unit” from the table. These changes do not affect the estimated level of emissions control or reduction for the rule. The final NESHAP requires new and existing facilities to operate a capture system that collects gases and fumes from each emissions source and conveys the gases to a PM control device that controls emissions to the levels required in the rule. Emissions limits for PM, in lb/hr format, are established based on the process rate of the emissions source. The PM emissions limits apply to more than 20 emissions sources in the production of chromium compounds, including sodium chromate, sodium dichromate, chromic acid, chromic oxide, and chromium dehydrate at new and existing sources. 3. Compliance Requirements for Existing Area Sources As proposed, the compliance requirements for existing area sources are based on the operation and maintenance, recordkeeping, and reporting requirements in the title V permit of the area source located in North Carolina. The title V permit includes requirements for inspections and maintenance of each type of control device, semiannual reports of any deviation, and records of control device inspections and maintenance. The control devices used by the existing area sources in this source category include baghouses, dry electrostatic precipitators, wet electrostatic precipitators, and wet scrubbers. The monitoring requirements for existing area sources consist of inspection and maintenance requirements specific to the type of control device. In response to comments, we have revised the proposed requirements for initial and periodic inspections of control devices in several respects. The final rule requires an initial inspection for each installed control device which has operated within 60 days of the compliance date. An initial inspection for an installed control device which has not operated within 60 days of the compliance date must be conducted prior to startup. In addition, we have revised the requirements for initial inspections of the internal components of control devices to state that an initial inspection is not required if an inspection has been performed within the past 24 months (for an electrostatic precipitator) or within the past 12 months (for a baghouse or wet scrubber). The proposed requirements for initial inspections that do not require shutting down the process and control device, such as inspecting baghouses and ductwork for leaks and verifying proper operation of electrostatic precipitators and wet scrubbers, have not been revised. We have also clarified the timing for periodic inspections by requiring subsequent inspections 12 or 24 months after the last inspections and then annual or biennial inspections thereafter. We have also revised the final rule to clarify that the requirements for internal inspections of control devices do not apply to cyclonic scrubbers installed upstream of electrostatic precipitators. For a baghouse, this final NESHAP requires monthly visual inspections of the system ductwork and baghouse units for leaks. The plant owner or operator must conduct an annual inspection of the interior of each baghouse for structural integrity and condition of the filter fabric. For electrostatic precipitators, plants are required to conduct: (1) A daily check to verify that the electronic controls for corona power and rapper operation are functioning, that the corona wires are energized, and that adequate air pressure is present on the rapper manifold; (2) a monthly visual inspection of the system ductwork, cyclones (if applicable), housing unit, and hopper for leaks; and (3) a biennial internal inspection to determine the condition and integrity of corona wires, collection plates, plate rappers, hopper, and air diffuser plates. For wet electrostatic precipitators, plants also must conduct a daily check to verify water flow and a biennial internal inspection to determine the condition and integrity of plate wash spray heads. For wet scrubbers, plants are required to conduct: (1) A daily check to verify water flow to the scrubber; (2) a monthly visual inspection of the system ductwork and scrubber unit for leaks; and (3) an annual internal inspection for structural integrity and condition of the demister and spray nozzle. The owner or operator of an existing plant must record the results of each inspection, the results of any maintenance performed on the control device, and the date and time of each recorded action. The results of inspections and maintenance of control equipment must be recorded in a logbook (written or electronic). The logbook must be kept onsite and made available to the permitting authority upon request. The owner or operator of an existing plant is required to report any deviations from the emissions limits or monitoring requirements in a semiannual report submitted to the permitting authority. The owner or operator of an existing area source must submit an initial notification of applicability and a notification of compliance status according to the requirements in 40 CFR 63.9 of the General Provisions (40 CFR part 63, subpart A). In the notification of compliance status required by 40 CFR 63.9(h), the owner or operator must certify that equipment has been installed and is operating for each regulated emissions point and that the plant will comply with the inspection and maintenance requirements. A performance test is not required if a performance test has been conducted within the past 5 years using the specified test methods, and either no process changes have been made since the test, or the owner or operator can demonstrate that the results of the performance test, with or without adjustments, reliably demonstrate compliance despite process changes. The final rule also requires that the owner or operator comply with either the requirements for SSM plans and reports in 40 CFR 63.6(e)(3) or with the requirements in this final rule. The owner or operator is required to submit a report if an event occurs that results in emissions in excess of a PM limit and lasts for more than 4 hours. 4. Compliance Requirements for New Area Sources No changes have been made to the compliance requirements for new area sources. The owner or operator of a new source must install and operate a bag leak detection system for each baghouse used to comply with a PM emissions limit. For additional information on bag leak detection systems that operate on the triboelectric effect, see “Fabric Filter Bag Leak Detection Guidance”, U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, September 1997, EPA-454/R-98-015, NTIS publication number PB98164676. This document is available from the National Technical Information Service (NTIS), 5385 Port Royal Road, Springfield, VA 22161. The owner or operator of a new source that uses a control device other than a baghouse must submit a monitoring plan to the permitting authority for approval. The plan must describe the control device, the parameters to be monitored, and the operating limits for the parameters established during a performance test. The owner or operator of a new source is required to demonstrate initial compliance with each applicable PM emissions limit by conducting a performance test according to the requirements in 40 CFR 63.7. EPA Method 5 or 5D (40 CFR part 60, appendix A), as applicable, is to be used to determine the PM emissions. All of the testing, monitoring, operation and maintenance, recordkeeping, and reporting requirements of the part 63 General Provisions apply to a new area source. We have identified in the final NESHAP the General Provisions of 40 CFR part 63 applicable to existing and new sources. D. NESHAP for Flexible Polyurethane Foam Production and Fabrication Area Sources 1. Applicability and Compliance Dates This final NESHAP applies to both new and existing flexible foam production and flexible foam fabrication plants that are area sources. In response to comments, we have revised the compliance dates to allow more time for certain existing area sources to comply with the NESHAP. The owner or operator of an existing slabstock flexible polyurethane foam production-affected source must comply with all of the requirements of this area source NESHAP by July 16, 2008 instead of July 16, 2007. As proposed, the owner or operator of an existing molded flexible polyurethane foam production, an existing rebond foam production, or an existing flexible polyurethane foam fabrication affected source must comply by July 16, 2007. The owner or operator of a new area source must comply by July 16, 2007 or at startup, whichever is later. 2. Emissions Standards and Management Practices The Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories were listed pursuant to section 112(c)(3) for their contribution of the Urban HAP methylene chloride. No changes have been made since proposal to the required emissions standards and management practices. Table 1 of this preamble summarizes the various types of foam production and fabrication area sources covered by this final rule and the corresponding regulatory strategies. As shown in the table below, slabstock foam producers may still use limited amounts of methylene chloride as an auxiliary blowing agent (ABA). The technologies determined to be GACT for slabstock foam production area sources significantly reduce, but do not always eliminate the use of methylene chloride as an ABA. Methylene chloride use is prohibited for other uses at foam production and foam fabrication facilities. Table 1.—Foam Production and Fabrication Processes and Corresponding Regulations Area source types Final regulation 1. Slabstock polyurethane foam production a. Emission limits for methylene chloride used as an auxiliary blowing agent (ABA); b. Controls on storage vessels; c. Management practices for equipment leaks; and d. Prohibition on use of methylene chloride as an equipment cleaner; or Eliminate use of methylene chloride in slabstock foam production processes. 2. Molded polyurethane foam production Prohibit use of methylene chloride as mold release agent or equipment cleaner. 3. Rebond foam production Prohibit use of methylene chloride as mold release agent. 4. Foam fabrication adhesive use Prohibit use of methylene chloride adhesives. For slabstock foam production area sources, we are requiring emissions limits and management practices to reduce methylene chloride emissions from the production line, storage tanks, leaking equipment, and equipment cleaning. Emissions limits for methylene chloride used as an ABA are based on a formula which varies depending on the grades of foam being produced. Vapor balance systems or carbon beds are required for methylene chloride storage vessels. The management practices require plants to identify and correct leaking pumps and other equipment in methylene chloride service. Specifically, owners or operators must check periodically for equipment leaks (from quarterly for pumps and valves to annual for connectors) using EPA Method 21 (40 CFR part 60, appendix A). Leaks, which are defined as a reading of 10,000 parts per million (ppm) or greater, must be corrected within 15 days of when they are detected. The use of methylene chloride to clean mix heads and other equipment is prohibited. Slabstock foam facilities that do not use any methylene chloride at the facility are not subject to these emissions limitations and management practices. Such facilities are, however, required to submit a one-time report. This final rule prohibits the use of methylene chloride-based mold release agents at molded and rebond foam facilities, methylene chloride-based equipment cleaners at molded foam facilities, and methylene chloride-based adhesives for foam fabrication. 3. Compliance Requirements No changes have been made since proposal to the compliance requirements. Slabstock foam area sources continuing to use methylene chloride are required to monitor methylene chloride added at slabstock production mixheads and the methylene chloride contained in and added to methylene chloride storage tanks. Plants using carbon adsorber systems to control emissions from methylene chloride storage tanks must monitor the methylene chloride content of exhaust streams from outlet vents. Plants using a recovery device to reduce methylene chloride emissions are required to comply with a recovered methylene chloride monitoring and recordkeeping program. The owner or operator of a slabstock foam production area source that continues to use methylene chloride as an ABA must submit semiannual reports containing information on allowable and actual methylene chloride emissions, carbon adsorbers on storage tanks, and equipment leaks. Owners and operators are also required to submit annual compliance certifications. Records are required to demonstrate compliance, including a daily operating log of foam runs containing the grades of foam produced and related data, and records related to storage tanks and equipment leaks. Slabstock foam plants that do not use any methylene chloride must submit a one-time certification as part of their notification of compliance status. Molded foam, rebond foam, and foam fabrication area source facilities which operate loop slitters must prepare, and keep on file, compliance certifications which certify that the facility is not using the prohibited methylene-chloride based products. The area source plants must also maintain records documenting that the products they are using do not contain any methylene chloride. These can be records that would be kept in the absence of this final rule such as adhesive usage information and Material Safety Data Sheets. Foam fabrication area source plants which do not operate loop slitters have no compliance certification or recordkeeping requirements. The owner or operator of each slabstock foam affected source that continues to use methylene chloride and, therefore, is subject to the methylene chloride emissions limits, is required to comply with several requirements of the General Provisions in 40 CFR part 63, subpart A. We have identified in the final NESHAP the General Provisions that apply to existing and new sources. For slabstock foam production facilities that have eliminated the use of methylene chloride and are not subject to the emissions limitations in this final rule, we are requiring that owners or operators submit a notification certifying that they do not use any methylene chloride. Slabstock foam facilities that choose to use methylene chloride in the future will be subject to the emission limits and other requirements discussed above. E. NESHAP for Lead Acid Battery Manufacturing Area Sources 1. Applicability and Compliance Dates This final NESHAP applies to new and existing lead acid battery manufacturing plants that are area sources. The owner or operator of an existing source must comply with all the requirements of this area source NESHAP by July 16, 2008. The owner or operator of a new source must comply with this area source NESHAP by July 16, 2007 or at startup, whichever is later. 2. Emissions Standards and Management Practices The Lead Acid Battery Manufacturing area source category was listed for regulation pursuant to section 112(c)(3) for its contribution of the Urban HAP lead and cadmium. As proposed, we are adopting as the NESHAP for the Lead Acid Battery Manufacturing area source category the numerical emissions limits for grid casting, paste mixing, three-process operations, lead oxide manufacturing, lead reclamation, and other lead emitting processes in 40 CFR 60.372 of the new source performance standards (NSPS) for lead acid batteries. These lead discharge limits are: • 0.40 milligram of lead per dry standard cubic meter of exhaust (mg/m 3 ) from grid casting facilities, • 1.00 mg/m 3 from paste mixing facilities, • 1.00 mg/m 3 from three-process operation facilities, • 5.0 mg per kilogram of lead feed from lead oxide manufacturing facilities, • 4.50 mg/m 3 from lead reclamation facilities, and • 1.0 mg/m 3 from any other lead-emitting operations. We are also adopting the opacity limits from the lead acid battery NSPS. The opacity of emissions must be no greater than 5 percent from lead reclamation facilities and no greater than 0 percent from any affected facility except lead reclamation facilities. 3. Compliance Requirements At proposal, we stated that we would adopt in this NESHAP the compliance requirements in the NSPS for lead acid batteries. We incorrectly stated in the proposal that title V would not add monitoring to the proposed NESHAP. While that statement was accurate for emissions units controlled by scrubbing systems, it was not accurate for emissions units controlled by fabric filters. We recognized our error during our consideration of comments submitted on the proposal. We have incorporated the part 63 monitoring, recordkeeping, and reporting requirements for all emissions units instead of those in part 60. We concluded that the part 63 General Provisions are more appropriate for this NESHAP than are the part 60 General Provisions that were proposed. We have also added periodic monitoring, recordkeeping, and reporting requirements for emissions units controlled by fabric filters. We are adopting in this NESHAP the testing and monitoring and requirements in the NSPS for lead acid batteries. These provisions include the requirement to conduct a performance test and opacity measurement for each source. They also require continuous monitoring of the pressure drop for sources controlled by scrubbing systems. In addition to these requirements, we added to the final rule daily recordkeeping and semiannual reporting requirements for emissions units that are controlled by scrubbing systems. We added to the final rule monitoring, recordkeeping, and reporting requirements for emissions units that are controlled by fabric filters. These requirements direct facilities to conduct semiannual inspections of fabric filter structure and bags, and to either: (1) Measure and record the pressure drop across the fabric filter once per day, or (2) conduct daily visible emission observations. If visible emissions are detected, the final rule requires that an opacity measurement be made. A weekly rather than daily alternative monitoring frequency is also available for emissions units that utilize high efficiency particulate air (HEPA) filters in combination with fabric filters. We are also adopting the testing, monitoring, recordkeeping, and reporting requirements and the initial notification and notification of compliance requirements in the part 63 General Provisions (40 CFR part 63, subpart A). We concluded that the part 63 General Provisions are more appropriate for this NESHAP than the part 60 General Provisions that were proposed. We have clarified the deadline for submission of initial notifications required by § 63.9 of the General Provisions (40 CFR part 63, subpart A). The initial notification of applicability required for existing facilities is due by November 13, 2007. The notification of compliance status is due 60 days after the 1 year deadline for compliance September 15, 2008. We have identified in the final NESHAP the applicable General Provisions of 40 CFR part 63. The final NESHAP allows existing plants to utilize previously conducted performance tests, when they are representative of current conditions, to demonstrate compliance. Plants without representative prior performance tests are required to conduct performance tests by 180 days after the compliance date. F. NESHAP for Wood Preserving Area Sources 1. Applicability and Compliance Dates This final NESHAP applies to new and existing wood preserving plants that are area sources. The owner or operator of an existing source must comply with all the requirements of this area source NESHAP by July 16, 2007. The owner or operator of a new source must comply by July 16, 2007 or at startup, whichever is later. 2. Emissions Standards and Management Practices The Wood Preserving area source category was listed for regulation under section 112(c)(3) for its contribution of the following Urban HAP: arsenic, chromium, methylene chloride, and dioxin. The only changes to the rule made since proposal are clarifications of applicability and the required management practices. We are adopting as the NESHAP for the Wood Preserving area source category the control technologies and management practices that we have determined are generally available, considering cost, for the wood preserving industry. We have revised the rule since proposal to clarify that the management practices and other recordkeeping and notification requirements in the NESHAP apply to those facilities that are using a wood preservative containing arsenic, chromium, dioxins, or methylene chloride. The NESHAP requires that facilities using a pressure treatment process use a retort or similarly enclosed vessel for the preservative treatment of wood involving any wood preservative containing chromium, arsenic, dioxins, or methylene chloride. Facilities using a thermal treatment process involving any wood preservative containing chromium, arsenic, dioxins, or methylene chloride are required to use process treatment tanks equipped with air scavenging systems to capture and control air emissions. This final rule also requires facility owners or operators using any wood preservative containing chromium, arsenic, dioxins, or methylene chloride to minimize emissions from process tanks and equipment ( e.g. , retorts, other enclosed vessels, and thermal treatment tanks), as well as storage, handling, and transfer operations. These standards are to be documented in a management practices plan that must include, but not be limited to, the following activities: • Minimizing preservative usage; • Maintaining records on the type of treatment process and types and amounts of wood preservatives used at the facility; • For the pressure treatment process, maintaining charge records identifying pressure reading(s) inside the retort (or similarly enclosed vessel, if applicable); • For the thermal treatment process, maintaining records that an air scavenging system is installed and operated properly during the treatment process; • For the pressure treatment process, we proposed a requirement for facilities to fully drain the retort prior to opening the retort door. In the final rule, we have clarified this provision to require facilities to fully drain the retort to the extent practicable, prior to opening the retort door; • Storing treated wood product on drip pads or in a primary containment area to convey preservative drippage to a collection system until drippage has ceased; • Promptly collecting any spills; and • Performing relevant corrective actions or preventative measures in the event of a malfunction before resuming operations. Existing written standard operating procedures may be used as the management practices plan if those procedures include the minimum activities required for a management practices plan. 3. Compliance Requirements No changes have been made since proposal to the compliance requirements for wood preserving facilities. Plants that use any wood preservative containing chromium, arsenic, dioxins, or methylene chloride are required to comply with the notification requirements in the part 63 General Provisions (40 CFR part 63, subpart A). This final rule establishes the content and deadlines for submission of the notifications. We have explicitly identified in this final NESHAP the applicable General Provisions of 40 CFR part 63. The final standards require recordkeeping to serve as monitoring and deviation reporting to demonstrate compliance. The compliance requirements for new and existing area sources are based on certain notification requirements in the part 63 General Provisions. The initial notification of applicability required by 40 CFR 63.9(b)(2) requires the owner or operator to identify the plant as an area source subject to the standards. The notification of compliance status requires the owner or operator to certify compliance with the standards. No other recordkeeping or reporting requirements in the General Provisions are applicable. IV. Exemption of Certain Area Source Categories From Title V Permitting Requirements Section 502(a) of the CAA provides that the Administrator may exempt an area source category from title V if he determines that compliance with title V requirements is “impracticable, infeasible, or unnecessarily burdensome” on an area source category. See CAA section 502(a). In December 2005, in a national rulemaking, EPA interpreted the term “unnecessarily burdensome” in CAA section 502 and developed a four-factor balancing test for determining whether title V is unnecessarily burdensome for a particular area source category, such that an exemption from title V is appropriate. See 70 FR 75320, December 19, 2005 (“Exemption Rule”). The four factors that EPA identified in the Exemption Rule for determining whether title V is “unnecessarily burdensome” on a particular area source category include: (1) Whether title V would result in significant improvements to the compliance requirements, including monitoring, recordkeeping, and reporting, that are proposed for an area source category (70 FR 75323); (2) whether title V permitting would impose significant burdens on the area source category and whether the burdens would be aggravated by any difficulty the sources may have in obtaining assistance from permitting agencies (70 FR 75324); (3) whether the costs of title V permitting for the area source category would be justified, taking into consideration any potential gains in compliance likely to occur for such sources (70 FR 75325); and (4) whether there are implementation and enforcement programs in place that are sufficient to assure compliance with the NESHAP for the area source category, without relying on title V permits (70 FR 75326). In discussing the above factors in the Exemption Rule, we explained that we considered on “a case-by-case basis the extent to which one or more of the four factors supported title V exemptions for a given source category, and then we assessed whether considered together those factors demonstrated that compliance with title V requirements would be `unnecessarily burdensome' on the category, consistent with section 502(a) of the Act.” See 70 FR 75323. Thus, in the Exemption Rule, we explained that not all of the four factors must weigh in favor of exemption for EPA to determine that title V is unnecessarily burdensome for a particular area source category. Instead, the factors are to be considered in combination, and EPA determines whether the factors, taken together, support an exemption from title V for a particular source category. In response to the proposed rule, we received a comment concerning the proposed title V exemptions. In response to this comment, we re-examined the four factors for each of the area source categories for which we had proposed an exemption. As explained below, after evaluating the relevant factors, we again conclude that the requirements of title V would be unnecessarily burdensome on the area source categories for which we proposed an exemption from title V. In the Exemption Rule, in addition to determining whether compliance with title V requirements would be unnecessarily burdensome on an area source category, we considered, consistent with the guidance provided by the legislative history of section 502(a), whether exempting the area source category would adversely affect public health, welfare or the environment. See 70 FR 15254-15255, March 25, 2005. As discussed below in sections IV.A through IV.D of this preamble, we have determined that the proposed exemptions from title V would not adversely affect public health, welfare and the environment. We therefore finalize the proposed exemptions in this rule. A. Acrylic and Modacrylic Fibers Production In sections IV.A through IV.D of this preamble, we apply the four-factor balancing test to determine whether title V is unnecessarily burdensome on the area source category. Starting with the first factor, which is to determine whether title V permits would result in significant improvements to the compliance requirements for the Acrylic and Modacrylic Fibers Production area source category, we compared the monitoring, recordkeeping, and reporting requirements of title V permitting to those requirements in the final NESHAP. As noted above (see section III.A of this preamble), the final NESHAP adopts the compliance requirements in the State-issued permit for the one area source plant currently in operation. Specifically, this final rule requires CPMS to measure and record the water flow rate to the control device (wet scrubber) every 15 minutes and to determine the daily average flow rate. Periodic visual inspections of AN storage tanks equipped with a fixed roof in combination with an internal floating roof must be conducted according to the NSPS requirements in 40 CFR part 60, subpart Kb. This final rule, therefore, contains both continuous and noncontinuous monitoring requirements, which constitute periodic monitoring. Under EPA's Final Rule Interpreting the Scope of Certain Monitoring Requirements for State and Federal Operating Permits Programs (71 FR 75422, December 15, 2006) (“Interpretive Rule”), if an applicable requirement, such as a NESHAP, contains periodic testing or instrumental or non-instrumental monitoring ( i.e. , periodic monitoring), permitting authorities are not authorized to assess the sufficiency of or impose new monitoring requirements on a case-by-case basis; therefore, title V would not impose additional monitoring requirements on sources in this category. We also considered the extent to which title V could enhance compliance through recordkeeping or reporting requirements, including title V requirements for a 6-month monitoring report, deviation reports, and an annual compliance certification in 40 CFR 70.6 and 71.6. The final rule for acrylic and modacrylic fibers production requires the owner or operator to submit an initial certification of compliance that must be signed by a responsible official. In addition, the owner or operator must determine compliance with daily average operating limits for the water flow rates to each control device on a monthly basis and submit compliance reports to EPA or the delegated authority on a quarterly basis. Should the daily average water flow rate to a wet scrubber control device fall below the operating limits, the plant must notify the delegated authority in writing within 10 days of the identification of the exceedance. Reports of performance test results are required. New and existing sources are also required to comply with the requirements for SSM plans, reports, and records in 40 CFR 63.6(e)(3). When an SSM report must be submitted, it must consist of a letter, containing the name, title, and signature of the owner or operator or other responsible official who is certifying its accuracy. Records are required to demonstrate compliance with the NSPS inspection and repair requirements for storage tanks in 40 CFR part 60, subpart Kb. Records are also required for the monthly compliance determination for scrubber operating limits. The information required in the final rule is similar to the information that must be provided in the deviation reports and semiannual monitoring reports required under 40 CFR 70.6(a)(3) and 40 CFR 71.6(a)(3). This final rule does not require an annual compliance certification report, which is a requirement of a title V permit. See 40 CFR 70.5(c)(9)(iii) and 40 CFR 71.6(c)(5)(i). The EPA believes that the annual certification reporting requirement is not necessary because the initial compliance certification and subsequent quarterly reports are more than adequate to determine compliance for existing sources. New sources must submit notifications and reports required by the part 63 General Provisions. Moreover, the certifications that new and existing sources must submit under the part 63 General Provisions and the final rule include initial notification of compliance status; periodic and immediate reports under the SSM provisions; and reports of excess emissions and monitoring system performance. The monitoring, recordkeeping, and reporting requirements in the final rule for the Acrylic and Modacrylic Fibers Production area source category are substantially equivalent to such requirements under title V. Therefore, we conclude that title V would not result in significant improvements to the compliance requirements we are promulgating for this area source category. We evaluated factor two to determine whether title V permitting would impose a significant burden on the area source category and whether that burden would be aggravated by any difficulty the source may have in obtaining assistance from the permitting agency. Subjecting any source to title V permitting imposes certain burdens and costs that do not exist outside of the title V program. The EPA estimated that the average annual cost of obtaining and complying with a title V permit was $7,700 per year per source, including fees, or $38,000 per source for a 5-year permit period. See Information Collection Request (ICR) for Part 70 Operating Permit Regulations, January 2000, EPA ICR Number 1587.05. There are certain activities associated with the part 70 and 71 rules that are mandatory and impose burdens on the source. They include reading and understanding permit program guidance and regulations; obtaining and understanding permit application forms; answering follow-up questions from permitting authorities after the application is submitted; reviewing and understanding the permit; collecting records; preparing and submitting monitoring reports on a 6-month or more frequent basis; preparing and submitting prompt deviation reports, as defined by the State, which may include a combination of written, verbal, and other communications methods; collecting information, preparing, and submitting the annual compliance certification; preparing applications for permit revisions every 5 years; and, as needed, preparing and submitting applications for permit revisions. In addition, although not required by the permit rules, many sources obtain the contractual services of professional scientists and engineers (consultants) to help them understand and meet the permitting program's requirements. The ICR for part 70 may help to understand the overall burdens and costs, as well as the relative burdens, of each activity described here. Also, for a more comprehensive list of requirements imposed on part 70 sources (hence, burden on sources), see the requirements of 40 CFR 70.3, 70.5, 70.6, and 70.7. In considering the second factor for the one existing area source acrylic and modacrylic fibers plant, we examined the potential economic resources of the parent company and whether the source would have any difficulty in obtaining assistance from the permitting authority. Although this area source plant is small ( i.e. , it is the smallest of the four known plants in the source category), the parent company is a multi-national corporation and is not a small business. In addition, the plant has worked closely with the State permitting authority to obtain State operating permits and a designation as a synthetic minor source, which means the plant must keep HAP emissions below the major source threshold. The State agency has assigned a staff person who is specifically responsible for the permitting of sources at the plant. This staff person is familiar with the production processes, emissions sources, and permitting requirements for the plant; therefore, the staff person can provide permitting assistance as needed. Consequently, we have no evidence that obtaining a title V permit would impose a significant burden on this particular area source or that the burden would be aggravated by any difficulty in obtaining assistance from permitting authorities. However, we do not know what circumstances would exist for new sources in this category. The third factor, which is closely related to the second factor, is whether the costs of title V permitting for these area sources would be justified, taking into consideration any potential gains in compliance likely to occur for such sources. While we concluded that the one existing area source could sustain the cost of title V permit requirements without a significant economic impact on the company as a whole, we do not think the costs for the one existing area source are justified because we do not think title V permitting would lead to gains in compliance by the source. As discussed above for factor one, we determined that the compliance requirements of this NESHAP are substantially equivalent to the requirements of title V. Furthermore, as discussed below for factor four, there are adequate implementation and enforcement programs in place that are sufficient to assure compliance with the NESHAP. We conclude, therefore, that the costs of title V are not justified for the one existing area source in this category, even though we concluded the costs would not be burdensome on the existing area source in this category. Furthermore, for new sources, the requirements of title V may be a significant burden and, since we have determined consistent with the first factor that there would not be significant improvements in compliance under title V, we likewise conclude that the cost would not be justified. The fourth factor we considered is whether there are implementation and enforcement programs in place that are sufficient to assure compliance with this NESHAP without relying on title V permits. In the proposal, we considered whether there are State programs in place to enforce these area source NESHAP. We stated that we believe that the State programs are sufficient to assure compliance with these NESHAP. We also noted that EPA retains authority to enforce these NESHAP anytime under CAA sections 112, 113 and 114. We concluded that title V permitting is “unnecessary” to assure compliance with these NESHAP because the statutory requirements for implementation and enforcement of these NESHAP by the delegated States and EPA are sufficient to assure compliance with these area source NESHAP without title V permits. We also noted that small business assistance programs required by CAA section 507 may be used to assist area sources that have been exempted from title V permitting. Also, States and EPA often conduct voluntary compliance assistance, outreach, and education programs (compliance assistance programs), which are not required by statute. We determined that these additional programs will supplement and enhance the success of compliance with these area source NESHAP and concluded that in light of all of the above, that there are implementation and enforcement programs in place that are sufficient to assure compliance with these NESHAP without relying on title V permitting. In applying the fourth factor in the Exemption Rule, where EPA had deferred action on the title V exemption for several years, we had enforcement data available to demonstrate that States were not only enforcing the provisions of the area source NESHAP that we exempted, but that the States were also providing compliance assistance to ensure that the area sources were in the best position to comply with the NESHAP. See 70 FR 75325-75326. We do not have similar data for this rule because we are issuing this final NESHAP today. In the Exemption Rule, EPA exempted the categories from the requirements of title V after the NESHAP was issued. Although we do not have the type of enforcement data we had in the Exemption Rule, we have no reason to think that States will be less diligent in enforcing this NESHAP. See 70 FR 75326. In fact, States must have adequate programs to enforce section 112 regulations and provide assurances that it will enforce all NESHAP before EPA will delegate the program. See 40 CFR part 63, subpart E. There are State programs in place to enforce this area source NESHAP and assure compliance with the NESHAP. In light of the above, we conclude that there are implementation and enforcement programs in place that are sufficient to assure compliance with the final rule without relying on title V permitting. Considering the factors in combination supports the finding in the proposal that title V is unnecessarily burdensome on this area source category. We found in the proposal and again here that title V would not result in significant improvements to the compliance requirements applicable to this area source category and that there are adequate implementation and enforcement programs in place to assure compliance with the NESHAP. Although we concluded that the cost of title V permitting would not be burdensome on the one known existing area source, we cannot conclude that title V would not be a significant burden on new sources in the category. We also found that the cost is not justified because we could not identify any potential gains in compliance within the category if title V were required for this category. Thus, we conclude that title V permitting is “unnecessarily burdensome” for the Acrylic and Modacrylic Fibers Production area source category. In addition to evaluating whether compliance with title V requirements is “unnecessarily burdensome”, EPA also considered, consistent with guidance provided by the legislative history of section 502(a), whether exempting these area source categories from title V requirements would adversely affect public health, welfare, or the environment. We stated at proposal that exemption of this area source category from title V requirements would not adversely affect public health, welfare, or the environment because the level of control would remain the same even if a title V permit were required. We continue to believe that there would be no adverse effects for all of the reasons supporting the exemptions as discussed above. Importantly, the title V permit program does not impose new substantive air quality control requirements on sources, but instead requires that certain procedural measures be followed, particularly with respect to determining compliance with applicable requirements. As stated in our consideration of factor one for this category, title V would not lead to significant improvements in the compliance requirements applicable to existing or new area sources. We conclude, therefore, that exempting this area source category from title V permitting requirements in the final rule would not adversely affect public health, welfare, or the environment. Moreover, one of the primary purposes of the title V permitting program is to clarify, in a single document, the various and sometimes complex regulations that apply to sources in order to improve understanding of these requirements and to help sources to achieve compliance with the requirements. In this case, placing all requirements for the one existing area source in a title V permit would do little to clarify the requirements applicable to that source or assist it in compliance with those requirements because of the simplicity of the source and the NESHAP, and the fact that this source is not subject to other NESHAP or to other requirements under the CAA. Given that the emissions profile for new sources should be similar to the existing source, we believe that new sources would be subject to similar CAA requirements. For the foregoing reasons, we are exempting the Acrylic and Modacrylic Fibers Production area source category from title V permitting requirements. B. Flexible Polyurethane Foam and Fabrication As discussed in the proposal, to determine whether title V permits would result in significant improvements to the compliance requirements in the final NESHAP for flexible polyurethane foam production and fabrication area source categories (factor one in determining whether title V permitting is “unnecessarily burdensome”), we compared the title V monitoring, recordkeeping, and reporting requirements to those requirements in the final NESHAP for these source categories. This final NESHAP does not contain monitoring or periodic reporting requirements for molded foam production, rebond foam production, and foam fabrication facilities that must eliminate the use of methylene chloride, or for slabstock foam production facilities that elect to totally eliminate the use of methylene chloride. Since these facilities have discontinued the use of methylene chloride entirely, Urban HAP emissions would be reduced without the need for continuous or periodic monitoring of equipment or operations. For slabstock foam production facilities still using methylene chloride as an ABA, the final NESHAP requires the same periodic monitoring in the form of quantifying methylene chloride usage that must be performed by major sources. Therefore, title V would not add any monitoring to the final NESHAP. See the Interpretive Rule (71 FR 75422, December 15, 2006). We also considered the extent to which title V could enhance compliance for area sources through recordkeeping or reporting requirements, including title V requirements for a 6-month monitoring report, deviation reports, and an annual compliance certification in 40 CFR 70.6 and 71.6. The final NESHAP requires area source foam plants that have discontinued the use of methylene chloride to certify compliance with the prohibition on methylene chloride in their Notification of Compliance Status reports. For slabstock foam plants still using methylene chloride, the final NESHAP requires the same recordkeeping or reporting that must be performed by major sources. The information required in the final reports and records is similar to the information that must be provided in the deviation reports and required for title V permitting under 40 CFR 70.6(a)(3) and 40 CFR 71.6(a)(3). The final NESHAP requires a report if a deviation occurs, but does not require periodic compliance reports. The addition of periodic reports for sources that are subject to monitoring requirements would not result in significant improvements to the compliance requirements in the final NESHAP for these area source categories. The final NESHAP does not require an annual compliance certification report for slabstock facilities that continue to use methylene chloride, as would be required under a title V permit. See 40 CFR 70.5(c)(9)(iii) and 40 CFR 71.6(c)(5)(i). EPA believes that the annual certification reporting requirement is not necessary because the deviation reports are adequate to ensure compliance for new and existing sources. Furthermore, even absent the requirement to submit annual compliance certifications, sources must comply with all emission standards in the NESHAP. In conclusion, we do not believe that title V would lead to significant improvements in the compliance requirements for these categories. The second factor considered in determining whether title V is “unnecessarily burdensome” is whether title V permitting would impose significant burdens on the flexible polyurethane foam production and fabrication area sources and whether these burdens would be aggravated by difficulty they may have in obtaining assistance from permitting agencies. Subjecting any source to title V permitting imposes certain burdens and costs that do not exist outside of the title V program. The EPA estimated that the true average annual cost of obtaining and complying with a title V permit was $38,500 per source for a 5-year permit period, including fees. See Information Collection Request for Part 70 Operating Permit Regulations, January 2000, EPA Number 1587.05. The EPA does not have specific estimates for the burdens and costs of permitting flexible polyurethane foam production and fabrication area sources; however, there are certain source activities associated with the part 70 and 71 rules. These activities are mandatory and impose burdens on the source. They include reading and understanding permit program guidance and regulations; obtaining and understanding permit application forms; answering follow-up questions from permitting authorities after the application is submitted; reviewing and understanding the permit; collecting records; preparing and submitting monitoring reports on a 6-month or more frequent basis; preparing and submitting prompt deviation reports, as defined by the State, which may include a combination of written, verbal, and other communications methods; collecting information, preparing, and submitting the annual compliance certification; preparing applications for permit revisions every 5 years; and, as needed, preparing and submitting applications for permit revisions. In addition, although not required by the permit rules, many sources obtain the contractual services of professional scientists and engineers (consultants) to help them understand and meet the permitting programs’ requirements. The ICR for part 70 further explains the overall burdens and costs, as well as the relative burdens of each activity described here. Also, for a more comprehensive list of requirements imposed on part 70 sources (hence, burden on sources), see the requirements of 40 CFR 70.3, 70.5, 70.6, and 70.7. In the proposal, we stated that we believed the cost of a title V program would be a significant burden for the area sources in all the categories that we proposed to exempt. For flexible polyurethane foam production and fabrication, that conclusion was based on the types of smaller establishments that make up these categories. We estimate that over 90 percent of the firms in the NAICS code for these categories are small businesses, with over half the firms having less than 20 employees. We believe that these small sources will likely lack the technical resources needed to comprehend and comply with the permitting requirements and the financial resources needed to hire the necessary staff or outside consultants. Accordingly, we conclude that title V would be a significant burden for these categories because almost all the sources are small businesses with limited resources, and that it would be difficult for them to meet the numerous requirements applicable to sources under part 70 or 71, whether they have a standard or general permit. Also, we are not sure what level of title V related assistance permitting authorities would be able to provide such small sources. Thus, for the final rule, we believe factor two supports title V exemption for flexible polyurethane foam production and fabrication sources because title V compliance would impose a significant economic and non-economic burden on sources in these categories. The third factor is whether the costs of title V permitting for these area sources would be justified, taking into consideration any potential gains in compliance likely to occur for such sources. We concluded after consideration of the first factor that title V would not result in significant improvements to the compliance requirements in the final rule for flexible polyurethane foam production and fabrication source categories. We also concluded in our consideration of the second factor that title V permitting would be a significant burden on the facilities and that the burden was associated with both the financial cost of compliance as well as the time and effort that these small facilities would have to devote to compliance with title V. Furthermore, as discussed in our consideration of the fourth factor below, there are adequate implementation and enforcement programs in place sufficient to ensure compliance with the NESHAP. Because the costs, both economic and non-economic, are burdensome on these sources, and title V would not lead to significant improvements in compliance with the NESHAP, we conclude that requiring title V permitting is not justified for the Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories. The fourth factor we considered is whether there are implementation and enforcement programs in place that are sufficient to assure compliance with this NESHAP without relying on title V permits. In the proposal, we considered whether there are State programs in place to enforce these area source NESHAP. We stated that we believe that the State programs are sufficient to assure compliance with these NESHAP. We also noted that EPA retains authority to enforce these NESHAP anytime under CAA sections 112, 113 and 114. We concluded that title V permitting is “unnecessary” to assure compliance with these NESHAP because the statutory requirements for implementation and enforcement of these NESHAP by the delegated States and EPA are sufficient to assure compliance with these area source NESHAP without title V permits. We also noted that small business assistance programs required by CAA section 507 may be used to assist area sources that have been exempted from title V permitting. Also, States and EPA often conduct voluntary compliance assistance, outreach, and education programs (compliance assistance programs), which are not required by statute. We determined that these additional programs will supplement and enhance the success of compliance with these area source NESHAP and concluded that in light of all of the above, that there are implementation and enforcement programs in place that are sufficient to assure compliance with this NESHAP without relying on title V permitting. In applying the fourth factor in the Exemption Rule, where EPA had deferred action on the title V exemption for several years, we had enforcement data available to demonstrate that States were not only enforcing the provisions of the area source NESHAP that we exempted, but that the States were also providing compliance assistance to ensure that the area sources were in the best position to comply with the NESHAP. See 70 FR 75325-75326. In proposing this rule, we did not have similar data available on the specific enforcement as in the Exemption rule, but we have no reason to think that States will be less diligent in enforcing this NESHAP. See 70 FR 75326. In fact, States must have adequate programs to enforce the HAP regulations and provide assurances that it will enforce all NESHAP before EPA will delegate the program. See 40 CFR part 63, subpart E. In light of all of the above, we conclude that there are implementation and enforcement programs in place that are sufficient to assure compliance with the flexible polyurethane foam production and fabrication NESHAP without relying on title V permitting. Balancing the four factors for these area source categories strongly supports the proposed finding that title V is unnecessarily burdensome. We determined in the proposal and above that title V would not significantly improve the compliance requirements of the NESHAP and that the requirements of title V would be a significant burden on the facilities. We also determined that the costs of compliance with title V would not be justified because it would not likely lead to gains in compliance with the NESHAP and that there are sufficient implementation and enforcement programs in place to assure compliance without reliance on title V. All four factors weigh in favor of exemption, and we conclude that title V permitting is “unnecessarily burdensome” for the Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories. In addition to evaluating whether compliance with title V requirements is “unnecessarily burdensome”, EPA also considered, consistent with guidance provided by the legislative history of section 502(a), whether exempting the Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories from title V requirements would adversely affect public health, welfare, or the environment. Exemption of the Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories from title V requirements would not adversely affect public health, welfare, or the environment because the level of control would remain the same if a title V permit were required. The title V permit program does not impose new substantive air quality control requirements on sources, but instead requires that certain procedural measures be followed, particularly with respect to determining compliance with applicable requirements. As stated in our consideration of factor one for this category, title V would not lead to significant improvements in the compliance requirements applicable to existing or new area sources. Therefore, we conclude that exempting the flexible polyurethane foam production and fabrication area sources from title V permitting requirements in these rules will not adversely affect public health, welfare, or the environment. Moreover, one of the primary purposes of the title V permitting program is to clarify, in a single document, the various and sometimes complex regulations that apply to sources in order to improve understanding of these requirements and to help sources to achieve compliance with the requirements. In this case, however, we do not believe that a title V permit is necessary to understand the requirements applicable to these area sources, as the requirements are not complicated to understand or implement. Furthermore, the sources in this category are not subject to any other NESHAP or CAA requirements to combine into one title V permit. For these reasons, we do not find that title V permitting is necessary to improve understanding of and achieve compliance with these standards. For the foregoing reasons, we are exempting the Flexible Polyurethane Foam Production and Flexible Polyurethane Foam Fabrication area source categories from title V permitting requirements. C. Lead Acid Battery Manufacturing In the proposal, we discussed whether title V permitting was “unnecessarily burdensome” for the Lead Acid Battery Manufacturing area source category. Factor one in determining whether title V permitting is “unnecessarily burdensome” is to determine whether title V permits would result in significant improvements to the compliance requirements in the final NESHAP. In this NESHAP, we proposed adopting the compliance requirements in the NSPS for lead acid battery manufacturing as the compliance requirements for this area source category. The final rule includes the same provisions and requires monitoring, recordkeeping and deviation reporting to ensure compliance with the NESHAP. Specifically, the final rule requires that a facility using a scrubbing system install, calibrate, maintain, and operate a monitoring device that measures and records the pressure drop across the scrubbing system at least once every 15 minutes. Opacity requirements are zero percent for five of the six emission sources and five percent for the sixth. In addition to these requirements, we are adding in the final rule monitoring, recordkeeping and reporting requirements for emissions units controlled by fabric filters. These requirements direct facilities to perform and keep records of semiannual fabric filter inspections and to either: (1) Measure and record the pressure drop across the fabric filter once per day or (2) conduct daily visible emission observations. If visible emissions are detected, the final rule requires that an opacity measurement be made. The alternative of weekly monitoring is also available for emissions units that utilize HEPA filters in combination with fabric filters. Each facility must demonstrate compliance by either conducting a performance test or submitting the results of a recent performance test conducted using the methods and procedures in the final NESHAP. Because both the continuous and noncontinuous monitoring methods required by the final NESHAP constitute periodic monitoring, title V would not result in significant improvements to monitoring in the final NESHAP. See the Interpretive Rule (71 FR 75422, December 15, 2006). We also considered the extent to which title V could enhance compliance through recordkeeping or reporting requirements, including title V requirements for a 6-month monitoring report, deviation reports, and an annual compliance certification in 40 CFR 70.6 and 71.6. Records are required to demonstrate compliance. Plants are required to comply with the testing, monitoring, recordkeeping, and reporting requirements in the part 63 General Provisions (40 CFR part 63, subpart A). The information required in the NESHAP is similar to the information that must be provided in the deviation reports and semiannual monitoring reports required under 40 CFR 70.6(a)(3) and 40 CFR 71.6(a)(3). The NESHAP for lead acid battery manufacturing requires the owner or operator to submit an initial certification of compliance that must be signed by a responsible official. The NESHAP does not require an annual compliance certification report, as would be required under a title V permit. See 40 CFR 70.5(c 9)(iii) and 40 CFR 71.6(c)(5)(i). EPA believes that the title V annual certification reporting requirement is not necessary because the semiannual reports are adequate to ensure compliance for new and existing sources. Furthermore, even absent the requirement to submit annual compliance certifications, sources must comply with all emission standards in the NESHAP. Therefore, the monitoring, recordkeeping and reporting requirements in the final NESHAP for the Lead Acid Battery Manufacturing area source category are substantially equivalent to requirements under title V. We conclude that title V would not result in significant improvements to the compliance requirements for this area source category. The second factor considered in determining whether title V permitting is “unnecessarily burdensome” is whether title V permitting would impose a significant burden for the Lead Acid Battery Manufacturing area source category and whether that burden would be aggravated by any difficulty these sources may have in obtaining assistance from permitting agencies. Subjecting any source to title V permitting imposes certain burdens and costs that do not exist outside of the title V program. EPA previously estimated that the true average annual cost of obtaining and complying with a title V permit was $38,500 per source for a 5-year permit period, including fees. See Information Collection Request for Part 70 Operating Permit Regulations, January 2000, EPA ICR Number 1587.05. EPA does not have specific estimates for the burdens and costs of permitting lead acid battery manufacturing area sources; however, there are certain source activities associated with the part 70 and 71 rules. These activities are mandatory and impose burdens on the source. They include reading and understanding permit program guidance and regulations; obtaining and understanding permit application forms; answering follow-up questions from permitting authorities after the application is submitted; reviewing and understanding the permit; collecting records; preparing and submitting monitoring reports on a 6-month or more frequent basis; preparing and submitting prompt deviation reports, as defined by the State, which may include a combination of written, verbal, and other communications methods; collecting information, preparing, and submitting the annual compliance certification; preparing applications for permit revisions every 5 years; and, as needed, preparing and submitting applications for permit revisions. In addition, although not required by the permit rules, many sources obtain the contractual services of professional scientists and engineers (consultants) to help them understand and meet the permitting programs' requirements. The ICR for part 70 may help to understand the overall burdens and costs, as well as the relative burdens of each activity described here. Also, for a more comprehensive list of requirements imposed on part 70 sources (hence, burden on sources), see the requirements of 40 CFR 70.3, 70.5, 70.6, and 70.7. In considering the second factor for lead acid battery manufacturing, we examined the potential economic resources of the plants and their parent companies and whether they would have any difficulty in obtaining assistance from the permitting authority. There are a few multi-national corporations that own several lead acid battery manufacturing plants that would be subject to this NESHAP, and those facilities would have resources adequate to absorb the economic and non-economic burdens associated with complying with the title V permitting requirements. However, there are many plants that are small businesses for which the title V permitting requirements would be a significant burden, both economic and non-economic. In addition to the small businesses currently subject to the NSPS, there are some small plants 4 that are not subject to the NSPS that will be subject to the NESHAP. These small businesses will be burdened complying with the NESHAP, even if title V compliance is not required. 4 The new source performance standard (NSPD) applied only to plants that produced or had the design capacity to produce in one day batteries containing an amount of lead equal to or greater than 5.9 megagrams (6.5 tons). Through discussions with the industry trade organization, we have learned that very few lead acid battery manufacturing facilities currently are subject to a title V permit for either lead or other criteria pollutants. Some plants have synthetic minor permits to remain below the threshold for title V permitting for criteria pollutants. As such, if title V permits were required the sources would have difficulty obtaining assistance from the permitting authorities as they developed and applied for title V permits. This difficulty stems from the fact that there are about 60 plants in this area source category, and permitting authorities” resources are limited. Thus, the difficulty sources would have obtaining appropriate guidance from permitting authorities would only increase the already significant economic and non-economic burdens of title V on the small facilities with limited resources. The third factor is whether the costs of title V permitting for these area sources would be justified, taking into consideration any potential gains in compliance likely to occur for such sources. We evaluated the monitoring, recordkeeping, reporting requirements of the proposed NESHAP when considering the first factor and concluded above that title V would not lead to significant improvements to the compliance requirements for this category. In considering the second factor, we concluded that some of the existing area sources could comply with the title V permit requirements without a significant economic impact on the company as a whole. But, we also concluded that the costs would be a significant burden for small facilities, particularly those not currently covered by the NSPS because they would have to comply with the NESHAP and title V simultaneously. In addition, under the fourth factor below, we find that there are adequate implementation and enforcement programs in place to enforce the provisions of the NESHAP. We believe that the costs of compliance with title V are, therefore, not justified for this area source category given the little potential for gain in compliance benefits. The fourth factor we considered is whether there are implementation and enforcement programs in place that are sufficient to assure compliance with this NESHAP without relying on title V permits. In the proposal, we considered whether there are State programs in place to enforce these area source NESHAP. While we did not state this in the proposal, we know that States have been enforcing the NSPS on which the NESHAP is based for this source category for some time and that the State programs are sufficient to assure compliance with these NESHAP. We noted at proposal that EPA retains authority to enforce these NESHAP anytime under CAA sections 112, 113 and 114. We concluded that title V permitting is “unnecessary” to assure compliance with these NESHAP because the statutory requirements for implementation and enforcement of these NESHAP by the delegated States and EPA are sufficient to assure compliance with these area source NESHAP without title V permits. We also noted that small business assistance programs required by CAA section 507 may be used to assist area sources that have been exempted from title V permitting. Also, States and EPA often conduct voluntary compliance assistance, outreach, and education programs (compliance assistance programs), which are not required by statute. We determined that these additional programs will supplement and enhance the success of compliance with these area source NESHAP and concluded that in light of all of the above, that there are implementation and enforcement programs in place that are sufficient to assure compliance with these NESHAP without relying on title V permitting. In applying the fourth factor in the Exemption Rule, where EPA had deferred action on the title V exemption for several years, we had enforcement data available to demonstrate that States were not only enforcing the provisions of the area source NESHAP that we exempted, but that the States were also providing compliance assistance to ensure that the area sources were in the best position to comply with the NESHAP. See 70 FR 75325-75326. In proposing this rule, we did not have similar data available on the specific enforcement as in the Exemption Rule, but we have no reason to think that States will be less diligent in enforcing this NESHAP. See 70 FR 75326. In fact, States must have adequate programs to enforce the section 112 regulations and provide assurances that it will enforce all NESHAP before EPA will delegate the program. See 40 CFR part 63, subpart E. In light of all of the above, we conclude that there are implementation and enforcement programs in place that are sufficient to assure compliance with these NESHAP without relying on title V permitting. Balancing the four factors for this area source category supports the proposed finding that title V is unnecessarily burdensome. In considering the first factor, we concluded that title V would not lead to significant improvements in the compliance requirements. We concluded after consideration of the second factor that title V would impose a significant burden on the small facilities, particularly those not subject to the NSPS, but that the burden would not be significant for sources owned by larger companies. We concluded that the costs would not be justified given the little potential gain in the compliance likely to occur. We also determined that there are adequate implementation and enforcement programs in place to enforce the NESHAP and, furthermore, States have in fact been enforcing the provisions of the NSPS. All four factors individually support exemption, and collectively they support the finding in the proposal. Therefore, we conclude that title V permitting is “unnecessarily burdensome” for the Lead Acid Battery Manufacturing area source category. In addition to evaluating whether compliance with title V requirements is “unnecessarily burdensome”, EPA also considered, consistent with guidance provided by the legislative history of section 502(a), whether exempting the Lead Acid Battery Manufacturing area source category from title V requirements would adversely affect public health, welfare, or the environment. Exemption of the Lead Acid Battery Manufacturing area source category from title V requirements would not adversely affect public health, welfare, or the environment because the level of control would remain the same if a permit were required. The title V permit program does not impose new substantive air quality control requirements on sources, but instead requires that certain procedural measures be followed, particularly with respect to determining compliance with applicable requirements. As stated in our consideration of factor one for this category, title V would not lead to significant improvements in the compliance requirements applicable to existing or new area sources. There is no evidence in the record that leads us to question these conclusions. Therefore, we conclude that exempting the lead acid battery manufacturing area sources from title V permitting requirements in this rule will not adversely affect public health, welfare, or the environment. Furthermore, one of the primary purposes of the title V permitting program is to clarify, in a single document, the various and sometimes complex regulations that apply to sources in order to improve understanding of these requirements and to help sources to achieve compliance with the requirements. In this case, however, we do not believe that a title V permit is necessary to understand the requirements applicable to the lead acid battery manufacturing area sources. These plants are straightforward in design and are not covered by regulations with requirements that are very complicated to understand or implement. The permits we have examined for the Lead Acid Battery Manufacturing area source category currently consist of a single document that applies to all sources and to lead and the other criteria pollutants emitted. For these reasons, we do not find that title V permitting is necessary to improve understanding of and achieve compliance with these standards. For the foregoing reasons, we are exempting the Lead Acid Battery Manufacturing area source category from title V permitting requirements. D. Wood Preserving As discussed in the proposal, we compared the title V monitoring, recordkeeping, and reporting requirements (factor one) to the requirements in the NESHAP for the Wood Preserving area source category. EPA determined that the management practices currently used at most facilities is GACT and the rule requires recordkeeping that serves as monitoring and deviation reporting to ensure compliance with the NESHAP. The monitoring component of the first factor favors title V exemption because title V is unnecessary to provide adequate monitoring for wood preserving area sources. Because the NESHAP requires management practices for certain treatment processes and requires recordkeeping designed to serve as monitoring, additional monitoring requirements that might be added under title V would be unnecessary to assure compliance. Monitoring other than recordkeeping is not practical or appropriate in this case because the requirements are management practices. Records are required to ensure that the management practices are followed, including records of the type of preservative treatment process used, the types and quantities of preservatives used, and charge records of retort pressure. As part of the first factor, we have considered the extent to which title V could potentially enhance compliance for area sources covered by this final rule through recordkeeping or reporting requirements. For any affected wood preserving area source facility, the NESHAP requires an initial notification, a compliance status report, and deviations must be reported within 30 days. We considered the various title V recordkeeping and reporting requirements, including requirements for a 6-month monitoring report, deviation reports, and an annual certification in 40 CFR 70.6 and 71.6. The wood preserving NESHAP also requires affected facilities to certify compliance with the management practices required by the rule. In addition, wood preserving facilities must maintain records showing compliance with the required management practices and report deviations. The information required in the deviation reports and records is similar to the information that must be provided in the deviation reports required under 40 CFR 70.6(a)(3) and 40 CFR 71.6(a)(3). We acknowledge that title V might impose additional compliance requirements on this category, but, as stated in the proposal, we conclude that the monitoring, recordkeeping and reporting requirements of the NESHAP for wood preserving are sufficient to ensure compliance with the provisions of the NESHAP, and title V would not significantly improve those compliance requirements. Under the second factor, we determine whether title V permitting would impose a significant burden on the area sources in the category and whether that burden would be aggravated by any difficulty the source may have in obtaining assistance from the permitting agency. Subjecting any source to title V permitting imposes certain burdens and costs that do not exist outside of the title V program. The EPA estimated that the average cost of obtaining and complying with a title V permit was $38,500 per source for a 5-year permit period, including fees. See Information Collection Request for Part 70 Operating Permit Regulations, January 2000, EPA ICR Number 1587.05. The EPA does not have specific estimates for the burdens and costs of permitting wood preserving area sources; however, there are certain source activities associated with the part 70 and 71 rules. These activities are mandatory and impose burdens on the source. They include reading and understanding permit program guidance and regulations; obtaining and understanding permit application forms; answering follow-up questions from permitting authorities after the application is submitted; reviewing and understanding the permit; collecting records; preparing and submitting monitoring reports on a 6-month or more frequent basis; preparing and submitting prompt deviation reports, as defined by the State, which may include a combination of written, verbal, and other communications methods; collecting information, preparing, and submitting the annual compliance certification; preparing applications for permit revisions every 5 years; and, as needed, preparing and submitting applications for permit revisions. In addition, although not required by the permit rules, many sources obtain the contractual services of professional scientists and engineers (consultants) to help them understand and meet the permitting program's requirements. The ICR for part 70 provides additional information on the overall burdens and costs, as well as the relative burdens of each activity described here. Also, for a more comprehensive list of requirements imposed on part 70 sources (hence, burden on sources), see the requirements of 40 CFR 70.3, 70.5, 70.6, and 70.7. In assessing the second factor for wood preserving facilities, we found that over 90 percent of the 393 plants are small businesses, most with only a few employees. These small sources lack the technical resources needed to comprehend and comply with permitting requirements and the financial resources needed to hire the necessary staff or outside consultants. As discussed above, title V permitting would impose significant economic and non-economic costs on these area sources, and, accordingly, we conclude that title V is a significant burden for sources in this category. Most are small businesses with limited resources, and under title V they would be subject to numerous mandatory activities with which they would have difficulty complying, whether they were issued a standard or a general permit. Furthermore, given the large number of sources in the category and the relatively small size, it would likely be difficult for them to obtain assistance from the permitting authority. Thus, we find that factor two strongly supports title V exemption for wood preserving facilities. The third factor, which is closely related to the second factor, is whether the costs of title V permitting for these area sources would be justified, taking into consideration any potential gains in compliance likely to occur for such sources. We explained above under the second factor that the economic and non-economic costs of compliance with title V would impose a significant burden on most of the 393 wood preserving facilities. We also concluded in considering the first factor that, while title V might impose additional requirements, the monitoring, recordkeeping and reporting requirements in the NESHAP assure compliance with the management practices imposed in the NESHAP. In addition, below in our consideration of the fourth factor we find that there are adequate implementation and enforcement programs in place to assure compliance with the NESHAP. Because the costs, both economic and non-economic, of compliance with title V are so high, and the potential for gains in compliance is low, title V permitting is not justified for this source category. Accordingly, the third factor supports title V exemptions for wood preserving area sources. The fourth factor we considered in determining if title V is unnecessarily burdensome is whether there are implementation and enforcement programs in place that are sufficient to assure compliance with the NESHAP without relying on title V permits. In the proposal, we considered whether there are State programs in place to enforce these area source NESHAP. We stated that we believe that the State programs are sufficient to assure compliance with these NESHAP. We also noted that EPA retains authority to enforce these NESHAP anytime under CAA sections 112, 113, and 114. We concluded that title V permitting is “unnecessary” to assure compliance with these NESHAP because the statutory requirements for implementation and enforcement of these NESHAP by the delegated States and EPA are sufficient to assure compliance with these area source NESHAP without title V permits. We also noted that small business assistance programs required by CAA section 507 may be used to assist area sources that have been exempted from title V permitting. Also, States and EPA often conduct voluntary compliance assistance, outreach, and education programs (compliance assistance programs), which are not required by statute. We determined that these additional programs will supplement and enhance the success of compliance with these area source NESHAP and concluded that in light of all of the above, there are implementation and enforcement programs in place that are sufficient to assure compliance with these NESHAP without relying on title V permitting. In applying the fourth factor in the Exemption Rule, where EPA had deferred action on the title V exemption for several years, we had enforcement data available to demonstrate that States were not only enforcing the provisions of the area source NESHAP that we exempted, but that the States were also providing compliance assistance to ensure that the area sources were in the best position to comply with the NESHAP. See 70 FR 75325-75326. In proposing this rule, we did not have similar data available on the specific enforcement as in the Exemption rule, but we have no reason to think that States will be less diligent in enforcing this NESHAP. See 70 FR 75326. In fact, States must have adequate programs to enforce the section 112 regulations and provide assurances that it will enforce all NESHAP before EPA will delegate the program. See 40 CFR part 63, subpart E. In light of all of the above, we conclude that there are implementation and enforcement programs in place that are sufficient to assure compliance with the Wood Preserving NESHAP without relying on title V permitting. Balancing the four factors for this area source category strongly supports the proposed finding that title V is unnecessarily burdensome. While title V might add additional compliance requirements if imposed, we concluded that there would not be significant improvements to the compliance requirements in the NESHAP because the requirements in this final rule are specifically designed to assure compliance with the standards and management practices imposed on this area source category. We also concluded that the economic and non-economic costs of compliance with title V, in conjunction with the likely difficulty this large number of small sources would have obtaining assistance from the permitting authority, would impose a significant burden on the sources. We determined that the high relative costs would not be justified given that there is likely to be little or no potential gain in compliance if title V were required. And, finally, there are adequate implementation and enforcement programs in place to assure compliance with the NESHAP. Thus, we conclude that title V permitting is “unnecessarily burdensome” for the Wood Preserving area source category. In addition to evaluating whether compliance with title V requirements is “unnecessarily burdensome”, EPA also considered at proposal, consistent with guidance provided by the legislative history of section 502(a), whether exempting the Wood Preserving area source category from title V requirements would adversely affect public health, welfare, or the environment. Exemption of the Wood Preserving area source category from title V requirements would not adversely affect public health, welfare, or the environment because the level of control would remain the same if a permit were required. The title V permit program does not impose new substantive air quality control requirements on sources, but instead requires that certain procedural measures be followed, particularly with respect to determining compliance with applicable requirements. As stated in our consideration of factor one for this category, title V would not lead to significant improvements in the compliance requirements applicable to existing or new area sources. Furthermore, one of the primary purposes of the title V permitting program is to clarify, in a single document, the various and sometimes complex regulations that apply to sources in order to improve understanding of these requirements and to help sources to achieve compliance with the requirements. In this case, however, placing all requirements for the sources in a title V permit would do little to clarify the requirements applicable to the sources or assist them in compliance with those requirements because of the simplicity of the sources and the NESHAP, and the fact that these sources are not subject to other NESHAP or to other requirements under the CAA. We have no reason to think that new sources would be substantially different from the existing sources. In addition, we explained in the Exemption Rule that requiring permits for the large number of area sources could, at least in the first few years of implementation, potentially adversely affect public health, welfare, or the environment by shifting State agency resources away from assuring compliance for major sources with existing permits to issuing new permits for these area sources, potentially reducing overall air program effectiveness. For the final rule, we conclude that title V exemptions for the wood preserving area sources will not adversely affect public health, welfare, or the environment for all of the reasons explained above. For the foregoing reasons, we are exempting the Wood Preserving area source category from title V permitting requirements. V. Summary of Comments and Responses We received a total of 18 comments on the proposed NESHAP from seven industry trade associations, representatives of eight affected facilities, one environmental group, and two State agencies during the public comment period. Sections V.A through V.J of this preamble provide responses to the significant public comments received on the proposed NESHAP. A. Basis for Area Source Standards Comment: One commenter stated that EPA's decision to issue GACT standards pursuant to section 112(d)(5), instead of MACT standards pursuant to section 112(d)(2) and (d)(3), for six of the seven area source categories at issue in the proposed rule is arbitrary and capricious because EPA provided no rationale for its decision to issue GACT standards. The commenter makes this argument for the following six source categories: Acrylic and modacrylic fibers production, carbon black production, chemical manufacturing: Chromium compounds, flexible polyurethane foam production/flexible polyurethane foam fabrication, and lead acid battery manufacturing. Response: As the commenter itself recognizes, in section 112(d)(5), Congress gave EPA explicit authority to issue alternative emission standards for area sources. Specifically, section 112(d)(5), which is entitled “Alternative standard for area sources,” provides: With respect only to categories and subcategories of area sources listed pursuant to subsection (c) of this section, the Administrator may, in lieu of the authorities provided in paragraph (2) and subsection (f) of this section, elect to promulgate standards or requirements applicable to sources in such categories or subcategories which provide for the use of generally available control technologies or management practices by such sources to reduce emissions of hazardous air pollutants. ( Emphasis added ). There are two critical aspects to section 112(d)(5). First, section 112(d)(5) applies only to those categories and subcategories of area sources listed pursuant to section 112(c). The commenter does not dispute that EPA listed the six area source categories noted above pursuant to section 112(c)(3). Second, section 112(d)(5) provides that for area sources listed pursuant to section 112(c), EPA “may, in lieu of” the authorities provided in section 112(d)(2) and 112(f), elect to promulgate standards pursuant to section 112(d)(5). Section 112(d)(2) provides that emission standards established under that provision “require the maximum degree of reduction in emissions” of HAP (also known as MACT). Section 112(d)(3), in turn, defines what constitutes the “maximum degree of reduction in emissions” for new and existing sources. See section 112(d)(3). 5 Webster's dictionary defines the phrase “in lieu of” to mean “in the place of” or “instead of.” See Webster's II New Riverside University (1994). Thus, section 112(d)(5) authorizes EPA to promulgate standards under section 112(d)(5) that provide for the use of generally available control technologies or management practices (GACT), instead of issuing MACT standards pursuant to section 112(d)(2) and (d)(3). The statute does not set any condition precedent for issuing standards under section 112(d)(5) other than that the area source category or subcategory at issue must be one that EPA listed pursuant to section 112(c), which is the case here. 6 5 Specifically, section 112(d)(3) sets the minimum degree of emission reduction that MACT standards must achieve, which is known as the MACT floor. For new sources, the degree of emission reduction shall not be less stringent than the emission control that is achieved in practice by the best-controlled similar source, and for existing sources, the degree of emission reduction shall not be less stringent than the average emission limitation achieved by the best-performing 12 percent of the existing sources for which the Administrator has emissions information. Section 112(d)(2) directs EPA to consider whether more stringent—so called beyond-the-floor limits—are technologically achievable considering, among other things, the cost of achieving the emission reduction. 6 Section 112(d)(5) also references section 112(f). See CAA section 112(f)(5) (entitled “Area Sources” and providing that EPA is not required to conduct a review or promulgate standards under section 112(f) for any area source category or subcategory listed pursuant to section 112(c)(3) and for which an emission standard is issued pursuant to section 112(d)(5)). The commenter argues that EPA must provide a rationale for issuing GACT standards under section 112(d)(5), instead of MACT standards. The commenter is incorrect, however. Had Congress intended that EPA first conduct a MACT analysis for each area source category and only if cost or some other reason made applying the MACT standard inappropriate for the category would EPA be able to issue a standard under section 112(d)(5), Congress would have stated so expressly in section 112(d)(5). Congress did not require EPA to conduct any MACT analysis, floor [Text truncated at 120,000 characters. The full text is on the page linked above.] --- Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3AE7-12018. Public record. Not legal advice.