# Establishment Registration and Product Listing for Tobacco Products > Briefs, arguments, decisions, and more. URL: https://www.frixlaw.com/law-library/documents/fr%3A2026-13047 ## Record - **Collection:** Federal Register - **Document type:** Proposed Rule - **Published:** June 29, 2026 - **Citation:** 91 FR 39168 ## Text DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1108 [Docket No. FDA-2025-N-7130] RIN 0910-AH59 Establishment Registration and Product Listing for Tobacco Products AGENCY: Food and Drug Administration, HHS. ACTION: Proposed rule. SUMMARY: The Food and Drug Administration (FDA, the Agency, or we) is proposing regulations to prescribe the format, content, and procedures for establishment registration and tobacco product listing. Complete and accurate establishment registration and product listing information is important to accomplish statutory, regulatory, and public health objectives. Currently, only domestic owners and operators are required to register their establishments and list their tobacco products with FDA while foreign owners and operators are not subject to these requirements, creating significant gaps in Agency information. This action, if finalized, would extend registration and listing requirements to include owners and operators of foreign establishments. DATES: Either electronic or written comments on the proposed rule must be submitted by September 14, 2026. ADDRESSES: You may submit comments as follows. Please note that late, untimely filed comments will not be considered. The https://www.regulations.gov electronic filing system will accept comments until 11:59 p.m. Eastern Time at the end of September 14, 2026. Comments received by mail/hand delivery/courier (for written/paper submissions) will be considered timely if they are received on or before that date. Electronic Submissions Submit electronic comments in the following way: • Federal eRulemaking Portal: https://www.regulations.gov. Follow the instructions for submitting comments. Comments submitted electronically, including attachments, to https://www.regulations.gov will be posted to the docket unchanged. Because your comment will be made public, you are solely responsible for ensuring that your comment does not include any confidential information that you or a third party may not wish to be posted, such as medical information, your or anyone else's Social Security number, or confidential business information, such as a manufacturing process. Please note that if you include your name, contact information, or other information that identifies you in the body of your comments, that information will be posted on https://www.regulations.gov. • If you want to submit a comment with confidential information that you do not wish to be made available to the public, submit the comment as a written/paper submission and in the manner detailed (see “Written/Paper Submissions” and “Instructions”). Written/Paper Submissions Submit written/paper submissions as follows: • Mail/Hand Delivery/Courier (for written/paper submissions): Dockets Management Staff (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852. • For written/paper comments submitted to the Dockets Management Staff, FDA will post your comment, as well as any attachments, except for information submitted, marked and identified, as confidential, if submitted as detailed in “Instructions.” Instructions: All submissions received must include the Docket No. FDA-2025-N-7130 for “Establishment Registration and Product Listing for Tobacco Products.” Received comments, those filed in a timely manner (see ADDRESSES ), will be placed in the docket and, except for those submitted as “Confidential Submissions,” publicly viewable at https://www.regulations.gov or at the Dockets Management Staff between 9 a.m. and 4 p.m., Monday through Friday, 240-402-7500. • Confidential Submissions—To submit a comment with confidential information that you do not wish to be made publicly available, submit your comments only as a written/paper submission. You should submit two copies total. One copy will include the information you claim to be confidential with a heading or cover note that states “THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION.” The Agency will review this copy, including the claimed confidential information, in its consideration of comments. The second copy, which will have the claimed confidential information redacted/blacked out, will be available for public viewing and posted on https://www.regulations.gov. Submit both copies to the Dockets Management Staff. If you do not wish your name and contact information to be made publicly available, you can provide this information on the cover sheet and not in the body of your comments and you must identify this information as “confidential.” Any information marked as “confidential” will not be disclosed except in accordance with 21 CFR 10.20 and other applicable disclosure law. For more information about FDA's posting of comments to public dockets, see 80 FR 56469, September 18, 2015, or access the information at: https://www.govinfo.gov/content/pkg/FR-2015-09-18/pdf/2015-23389.pdf. Docket: For access to the docket to read background documents, the plain language summary of the proposed rule of not more than 100 words as required by the “Providing Accountability Through Transparency Act,” or the electronic and written/paper comments received, go to https://www.regulations.gov and insert the docket number, found in brackets in the heading of this document, into the “Search” box and follow the prompts and/or go to the Dockets Management Staff, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852, 240-402-7500. FOR FURTHER INFORMATION CONTACT: With regard to the proposed rule: James Anthony, Office of Regulations, or Anthony Villa, Office of Compliance and Enforcement, Food and Drug Administration, Center for Tobacco Products, Document Control Center, Bldg. 71, Rm. G335, 10903 New Hampshire Ave., Silver Spring, MD 20993-0002, 877-287-1373, CTPRegulations@fda.hhs.gov. With regard to the information collection: Amber Barrett, Office of Operations, Food and Drug Administration, Three White Flint North 10A-12M, 11601 Landsdown St., North Bethesda, MD 20852, 301-796-8867, PRAStaff@fda.hhs.gov. SUPPLEMENTARY INFORMATION: Table of Contents I. Executive Summary A. Purpose of the Proposed Rule B. Summary of the Major Provisions of the Proposed Rule C. Legal Authority D. Costs and Benefits II. Table of Abbreviations/Commonly Used Acronyms in This Document III. Background and Purpose IV. Legal Authority V. Description of the Proposed Rule A. Scope (Proposed § 1108.1) B. Definitions (Proposed § 1108.3) C. Who Must Register and Submit a Tobacco Product List (Proposed § 1108.20) D. When To Submit Establishment Registration and Tobacco Product Listing (Proposed § 1108.22) E. Information Required for Tobacco Product Establishment Registration and Tobacco Product Listing (Proposed § 1108.24) F. Maintaining a Historical File (Proposed § 1108.26) G. Updating Tobacco Product Listing Information (Proposed § 1108.28) H. Assignment of an FDA Establishment Identifier (FEI) Number (Proposed § 1108.32) I. Electronic Registration of Establishments and Listing of Tobacco Products (Proposed § 1108.40) J. Establishment Registration and Tobacco Product Listing for Foreign Establishments Importing or Offering for Import Tobacco Products Into the United States (Proposed § 1108.50) K. Conditions for Registration of Foreign Tobacco Product Establishments (Proposed § 1108.52) L. Public Availability of Registration and Tobacco Product Listing Information (Proposed § 1108.60) M. Misbranding (Proposed § 1108.62) VI. Proposed Effective Date VII. Preliminary Economic Analysis of Impacts A. Introduction B. Overview of Benefits, Costs, and Transfers VIII. Analysis of Environmental Impact IX. Paperwork Reduction Act of 1995 X. Federalism XI. Severability XII. Consultation and Coordination With Indian Tribal Governments XIII. References I. Executive Summary A. Purpose of the Proposed Rule The Family Smoking Prevention and Tobacco Control Act (Pub. L. 111-31) (Tobacco Control Act) added section 905 to the Federal Food, Drug, and Cosmetic Act (FD&C Act) (21 U.S.C. 387e), requiring the owners and operators of domestic tobacco product manufacturing establishments to register their establishments with FDA and submit product listings. Currently, domestic establishments are required to submit registration and product listing information and FDA has issued guidance to help tobacco establishments implement this provision. Under section 905 of the FD&C Act (21 U.S.C. 387e), every person who owns or operates any domestic establishment engaged in the “manufacture, preparation, compounding, or processing” of a tobacco product, including repackagers/relabelers, is required to register and list. For the purposes of the proposed rule, the term “manufacture” would include assembling, processing, homogenizing, mixing, formulating, labeling, or packaging. This proposed rule clarifies that persons who engage in the manufacture of a tobacco product include specification developers, third-party manufacturers, and bulk tobacco product manufacturers. For the purposes of this proposed rule, references to manufacturers or manufacturing hereinafter are inclusive of this definition and the requirements of the proposed rule would apply to owners and operators of establishments that perform manufacturing, preparation, compounding, or processing functions. FDA is also proposing corresponding changes to the forms currently used by domestic establishments, which would be used by all registrants to submit registration and listing information, and proposing that all registration and listing information be submitted electronically, unless a waiver has been granted by FDA for the registrant. Under sections 905 and 909 of the FD&C Act, FDA is also proposing recordkeeping requirements for a historical file of consumer information, labeling and advertisements for all tobacco products listed, as well as recordkeeping requirements for information about the distribution of free samples of smokeless tobacco products. Section 905 also applies to owners or operators of foreign establishments engaged in such functions, but section 905(h), specific to foreign establishments, requires the Secretary of Health and Human Services to promulgate regulations to implement the provision. This creates significant gaps in Agency information. This proposed rule would extend registration and listing requirements to foreign establishments that engage in the “manufacture, preparation, compounding, or processing” of a tobacco product. Registered foreign establishments would be subject to inspection under section 905(g) and 905(h) of the FD&C Act (21 U.S.C. 387e(g) and 387e(h)). Consequently, this rule would allow FDA to better protect the public health by helping to ensure that owners and operators of domestic and foreign establishments that manufacture tobacco products sold in, distributed in, and/or imported into the United States, are complying with Federal law, including FDA's premarket authorization requirements. Information that would be required by the rule would enable FDA to better pursue enforcement actions against non-compliant tobacco products that have entered commercial distribution or await entry into commercial distribution, at the border or otherwise, and in doing so better protect the public health. For example, registration and listing information would enable FDA to more efficiently identify adulterated or misbranded tobacco products, including unauthorized electronic nicotine delivery system (ENDS) products, which would be subject to refusal when imported or offered for import into the United States. In addition, since registered establishments are subject to FDA inspections by statute, this rule will extend FDA's inspections of establishments to foreign establishments. FDA currently inspects foreign establishments only to support premarket tobacco product application (PMTA) review per 21 CFR 1114.27. On February 13, 2025, the President signed Executive Order (E.O.) 14212 titled “Establishing the President's Make America Healthy Again Commission.” The E.O. sets forth that “[i]t shall be the policy of the Federal Government to aggressively combat the critical health challenges facing our citizens, including the rising rates of mental health disorders, obesity, diabetes, and other chronic diseases. To do so, executive departments and agencies (agencies) that address health or healthcare must focus on reversing chronic disease.” On September 9, 2025, the Make America Healthy Again Commission released the Strategy Report titled “Make Our Children Healthy Again,” which outlines a strategy of increased enforcement against illegal ENDS products. Tobacco use is the leading preventable cause of death and disease in the United States, including preventable chronic disease. Accordingly, this rule would support FDA's efforts to advance Administration priorities by helping FDA identify tobacco products sold, distributed, and/or imported into the United States, and the establishments that manufacture them, that do not comply with Federal law, and by enabling FDA to better pursue enforcement actions against non-compliant tobacco products. B. Summary of the Major Provisions of the Proposed Rule The proposed rule would prescribe the format, content, and procedures for establishment registration and tobacco product listing for domestic and foreign manufacturers of tobacco products. The proposed rule would extend registration and listing requirements to foreign establishments that engage in the “manufacture, preparation, compounding, or processing” of a tobacco product. Registered foreign establishments would be subject to inspection under section 905(g) and 905(h) of the FD&C Act (21 U.S.C. 387e(g) and 387e(h)). Proposed 21 CFR 1108 describes criteria for who would be required to register and list, when and how they would be required to register and list, and the type of information they would be required to submit to FDA. For both domestic and foreign establishments, this includes clarifying that the term “manufacture” includes persons who engage in this activity, such as specification developers, third-party manufacturers, and bulk manufacturers. Proposed 21 CFR 1108 would streamline the registration and listing process by enabling registrants to confirm that there are no changes and thereby complete their updates more efficiently, specifying the establishment information and uniquely identifying information for each listed product, and designating which establishment and unique product information is required or voluntary. Proposed 21 CFR 1108 generally would require the electronic submission of the registration and listing information. FDA is also proposing to require owners or operators of such establishments to maintain a historical file of consumer information, labeling and advertisements for all tobacco products listed in accordance with this part, as well as information related to the distribution of free samples of smokeless tobacco products. C. Legal Authority FDA is issuing this proposed rule under its authority delegated under sections 301, 701(a), 801(p), 902, 903, 905, 907, 909, 910, and 911 of the FD&C Act. Section 301 of the FD&C Act describes the acts that are prohibited by the FD&C Act (21 U.S.C. 331). Section 701(a) of the FD&C Act gives FDA general rulemaking authority to issue regulations for the efficient enforcement of the FD&C Act (21 U.S.C. 371(a)). Section 801(p) of the FD&C Act requires FDA to report to Congress on exports of tobacco products that do not conform to tobacco product standards established pursuant to the FD&C Act (21 U.S.C. 381(p)). Sections 902 (21 U.S.C. 387b) and 903 (21 U.S.C. 387c) of the FD&C Act describe the scenarios in which a tobacco product will be deemed adulterated and misbranded, respectively. Section 905 of the FD&C Act sets forth establishment registration and product listing requirements for owners and operators of domestic establishments engaged in the manufacture, preparation, compounding, or processing of tobacco products. In addition, section 905 permits FDA, by regulation, to require any foreign establishments engaged in the manufacture, preparation, compounding, or processing of tobacco products to register and list (21 U.S.C. 387e). Under section 907 of the FD&C Act, FDA can adopt a tobacco product standard if it finds that the standard is appropriate for the protection of the public health (21 U.S.C. 387g). Section 909 of the FD&C Act permits FDA, by regulation, to require manufacturers and importers of tobacco products to establish and maintain records, make reports, and provide information to ensure that such tobacco products are not adulterated or misbranded, and to otherwise protect the public health (21 U.S.C. 387i). Section 910 of the FD&C Act sets forth requirements for the premarket submission of applications and authorization of certain tobacco products (21 U.S.C. 387j). Moreover, under section 910(g) of the FD&C Act, FDA has the authority to exempt by regulation tobacco products intended for investigational use from the provisions of Chapter IX of the FD&C Act (21 U.S.C. 387j(g)). Section 911 of the FD&C Act sets forth requirements for modified risk tobacco products, including product authorization and marketing (21 U.S.C. 387k). D. Costs and Benefits This proposed rule prescribes the format, content, and procedures for establishment registration and tobacco product listing. If finalized, this proposed rule would also extend registration and listing requirements to owners and operators of foreign establishments where, currently, only domestic owners and operators are required to register and list their tobacco products. In addition, since registered establishments are subject to FDA inspections by statute, this rule will extend FDA's inspections of establishments to foreign establishments. While the specific benefits are difficult to quantify, having complete and accurate tobacco product establishment registration and product listing information for both domestic and foreign establishments can help FDA accomplish several important statutory, regulatory, and public health objectives, such as identifying establishments operating in violation of the FD&C Act, facilitating the recall of non-compliant tobacco products that have entered commercial distribution, or refusing adulterated or misbranded tobacco products imported or offered for import. We quantify costs to be incurred by both domestic and foreign establishments from the time used to enter and submit their registration and product listing information and also from the time it takes for their managers to accompany FDA inspections. The 20-year annualized total costs to domestic and foreign establishments and FDA would range from $6.80 million to $26.55 million at a 7 percent discount rate, with a primary estimate of $15.57 million. Costs incurred by domestic establishments would be $0.013 million (primary estimate at 7% discount rate), representing 0.1% of total costs. Costs incurred by foreign establishments are $0.37 million (primary estimate at 7% discount rate), representing 2.4% of total costs; FDA costs would account for the remaining 97.5% of total costs. This proposed rule would not affect the total amount of user fees set by statute nor the size of the federal budget. II. Table of Abbreviations/Commonly Used Acronyms in This Document Abbreviation/acronym What it means CFR Code of Federal Regulations. CTP Center for Tobacco Products. DUNS Data Universal Numbering System. ENDS Electronic Nicotine Delivery Systems. E.O. Executive Order. EX REQ Substantial Equivalence Exemption Request. FDA Food and Drug Administration. FD&C Act Federal Food, Drug, and Cosmetic Act. FEI FDA Establishment Identifier. FR Federal Register. FTZ Foreign Trade Zone. FURLS FDA Unified Registration and Listing System. HTP Heated Tobacco Products. MRTPA Modified Risk Tobacco Product Application. PD # FDA-assigned Product Identification Number. PMTA Premarket Tobacco Product Application. PRIA Preliminary Regulatory Impact Analysis. RGID # FDA-assigned Registration Identification Number. SE Substantial Equivalence. SKU Stock Keeping Unit. STN FDA-assigned Submission Tracking Number. Tobacco Control Act Family Smoking Prevention and Tobacco Control Act. TP # FDA-assigned Tobacco Product Number. TRLM Tobacco Registration and Listing Module. TRLM NG Tobacco Registration and Listing Module Next Generation. UPC Universal Product Code. U.S. United States. U.S.C. United States Code. III. Background and Purpose FDA is proposing regulations that would prescribe the form and content for (1) registration by owners or operators of domestic and foreign establishments that manufacture, prepare, compound, or process tobacco products, and (2) listing of finished tobacco products manufactured, prepared, compounded, or processed by such persons. FDA is issuing this proposed rule under its authority delegated under sections 301, 701(a), 801(p), 902, 903, 905, 907, 909, and 910 of the FD&C Act. Complete and accurate establishment registration and product listing information is important to accomplish statutory, regulatory, and public health objectives. For example, we may use establishment registration and listing information to: • Identify, conduct surveillance on, and catalog marketed tobacco products; • Identify persons or establishments producing a specific tobacco product; • Schedule and plan inspections of registered establishments pursuant to section 905(g) and 905(h) of the FD&C Act (21 U.S.C. 387e(g) and 387e(h)); • Facilitate the recall of tobacco products commercially distributed by owners or operators of tobacco product establishments; • Identify tobacco products marketed in violation of the law; • Identify and surveil tobacco products imported or offered for import into the United States from foreign establishments; • Identify tobacco products manufactured in the United States that are intended for export; • Identify establishments operating in violation of the FD&C Act and its implementing regulations; • Facilitate communication between the Agency and the tobacco product industry; and • Provide public access to up-to-date information regarding registered establishments and listed products through FDA's Establishment Registration & Tobacco Product Listing page. 1 1 The FDA Center for Tobacco Product's Establishment Registration and Tobacco Product Listing Page can be found at https://trlm-ng-rlsite.fda.gov/home. Additionally, we rely on up-to-date registration and listing information to help us carry out several other statutory provisions. For instance, we use this information to generate accurate estimates of the number of businesses that are affected by our rulemaking activities. These estimates help us assess the impact of our regulations on regulated industry as required under the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3501-3521) and E.O. 12866. In proposing the requirements, we considered: (1) FDA's ongoing experience since 2009 with tobacco product establishment registration and product listing for domestic establishments, including FDA's experience implementing its electronic tobacco product registration and listing system for domestic establishments; (2) Public comments on a draft guidance on the topic of registration and listing; 2 and (3) FDA's need for information about the types and number of manufactured tobacco products. If finalized, the rule would explain the detailed requirements of the registration and listing processes. 2 FDA announced the availability of the draft guidance on October 21, 2009 (74 FR 54052). Public comments on the draft guidance are available at https://www.regulations.gov/docket/FDA-2009-D-0508. FDA based many of the requirements in this proposed rule on the recommendations and interpretations originally outlined in an FDA guidance for industry entitled “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments” (R&L Guidance) 3 (finalized and first issued on November 12, 2009 (74 FR 58298) and subsequently revised in 2014, 2016, 2017, and most recently in 2023). This guidance is intended to assist persons making tobacco product establishment registration and product listing submissions to FDA under the requirements of section 905 of the FD&C Act (21 U.S.C. 387e). While several of the requirements in this proposed regulation are the same as or similar to the R&L Guidance recommendations, FDA has further refined the proposed requirements to implement the statutory requirements set forth by section 905 of the FD&C Act (21 U.S.C. 387e). Taking into account the Agency's and industry's experience with registration and listing of domestic establishments, this proposed rule would provide additional clarity and efficiency for the format, content, and procedures for establishment registration and tobacco product listing for domestic and foreign owners and operators. 3 Available at https://www.fda.gov/regulatory-information/search-fda-guidance-documents/registration-and-product-listing-owners-and-operators-domestic-tobacco-product-establishments. Section 905 of the FD&C Act (21 U.S.C. 387e) requires the owners and operators of domestic establishments engaged in the manufacture, preparation, compounding, or processing of a tobacco product to register their establishments with FDA and submit product listings. Currently, domestic establishments are required to submit registration and product listing information and FDA has issued guidance to help tobacco product establishments implement this provision. In this proposed rule, FDA is clarifying that persons who engage in the manufacture of a tobacco product include specification developers, third-party manufacturers, and bulk tobacco product manufacturers. FDA is proposing corresponding changes to the forms currently used by domestic establishments, which would be used by all registrants to submit registration and listing information and proposing that all registration and listing information be submitted electronically, unless a waiver has been granted by FDA for the registrant. Under sections 905 and 909 of the FD&C Act, FDA is also proposing recordkeeping requirements for a historical file of consumer information, labeling and advertisements for all tobacco products listed, as well as recordkeeping requirements for information about the distribution of free samples of smokeless tobacco products. Section 905(h) of the FD&C Act provides FDA with the authority to issue regulations requiring foreign manufacturers to register their establishments and list their products. Section 905(h) states, “[a]ny establishment within any foreign country engaged in the manufacture, preparation, compounding, or processing of a tobacco product or tobacco products, shall register under this section under regulations promulgated by [FDA].” Because FDA has not issued such regulations, foreign owners or operators are not currently required to register their establishments or list their tobacco products that are imported or offered for import into the United States, unlike domestic owners or operators who are subject to the already effective, self-implementing registration and listing requirements of section 905 of the FD&C Act (21 U.S.C. 387e). This discrepancy creates gaps in information for FDA to perform its public health mission. This proposed rule would therefore extend registration and listing requirements to foreign establishments that engage in the manufacture, preparation, compounding, or processing of a tobacco product. Registered foreign establishments would be subject to inspection under section 905(g) and 905(h) of the FD&C Act (21 U.S.C. 387e(g) and 387e(h)). FDA believes that issuing this regulation to apply these requirements to foreign owners and operators would bring parity between foreign and domestic owners and operators and in doing so improve FDA's understanding of the types of tobacco products being manufactured, the tobacco products sold in the United States, and the location of all establishments engaged in manufacturing them. For example, FDA does not have registration and listing information from establishments that manufacture ENDS outside of the United States that are imported or offered for import into the United States; having that information would help FDA more efficiently identify commercially marketed tobacco products in the United States that do not comply with the law and keep abreast of the marketplace. Accordingly, FDA is proposing registration and listing requirements for foreign tobacco product establishments. In addition to providing FDA with important information to protect public health, registration and listing information allows FDA to generate estimates of the number of businesses that are affected by rulemaking activities. These estimates help us assess the impact of FDA regulations on regulated industry, which is required under the Regulatory Flexibility Act of 1980 (5 U.S.C. 601-612), as amended by the Small Business Regulatory Enforcement Fairness Act of 1996; the Unfunded Mandates Reform Act of 1995 (2 U.S.C. 1501 et seq. ); the PRA; and E.O. 12866 (September 30, 1993). Additionally, establishment registration and product listing information provides FDA with the data for the annual export report to Congress required under section 801(p)(1) of the FD&C Act. In addition to lessening the burden on FDA and tobacco product establishments, electronic submission of registration and listing information furthers the purpose of the Government Paperwork Elimination Act of 1998 (GPEA) (44 U.S.C. 3504(a)(1)(B)(vi)). GPEA requires Federal agencies to give persons who are required to maintain, submit, or disclose information, the option of doing so electronically when practicable as a substitute for paper, and to use electronic authentication (electronic signature) methods to verify the identity of the sender and the integrity of the electronic content. IV. Legal Authority The Tobacco Control Act was enacted on June 22, 2009, amending the FD&C Act by, among other things, adding a new chapter (chapter IX) granting FDA authority to regulate the manufacture, marketing, and distribution of tobacco products to protect the public health. The Tobacco Control Act added section 905 to the FD&C Act (21 U.S.C. 387e), requiring the owners and operators of domestic manufacturing establishments engaged in manufacturing tobacco products to register with FDA and submit product listings. Section 905(b) of the FD&C Act requires “every person who owns or operates any establishment in any State engaged in the manufacture, preparation, compounding, or processing of a tobacco product or tobacco products” to register with FDA the name, places of business, and all such establishments owned or operated by that person (21 U.S.C. 387e(b)). Under section 905(b) of the FD&C Act, every owner and operator must register by December 31st of each year. Section 905(c) of the FD&C Act requires that every person upon first engaging in the manufacture, preparation, compounding, or processing of a tobacco product(s) in any such establishment immediately register its establishment (21 U.S.C. 387e(c)). Section 905(d) of the FD&C Act requires that every person required to register under section 905(b) or (c) immediately register any additional establishment which that person owns or operates in any State and in which that person begins to engage in such activities (21 U.S.C. 387e(d)). Section 905(f) of the FD&C Act provides that, upon request, FDA must make any registration filed under section 905 of the FD&C Act available to the requestor for inspection (21 U.S.C. 387e(f)). Additionally, section 905(h) of the FD&C Act gives FDA authority to require foreign establishments that are engaged in the manufacture, preparation, compounding, or processing of a tobacco product(s) to register their establishments and to list their products in accordance with regulations published by FDA (21 U.S.C. 387e(h)). Such regulations shall require foreign establishments to provide the information required by section 905(i) and shall include provisions for registration of foreign establishments upon the condition that adequate and effective means are available, by arrangement with the government of such foreign country or otherwise, to enable the Secretary to determine from time to time whether tobacco products manufactured, prepared, compounded, or processed in such establishment, if imported or offered for import into the United States, shall be refused admission on any of the grounds set forth in section 801(a). (21 U.S.C. 381(a)). Section 905(i)(1) of the FD&C Act requires that all registrants “shall, at the time of registration . . . file with [FDA] a list of all tobacco products which are being manufactured, prepared, compounded, or processed by that person for commercial distribution,” along with certain accompanying information, including a copy of all consumer information and other labeling (21 U.S.C. 387e(i)(1)). In addition, section 905(i)(3) of the FD&C Act requires that certain changes to previously submitted product listing information be reported to FDA biannually (21 U.S.C. 387e(i)(3)). Information provided pursuant to section 905 of the FD&C Act directly implicates, or has the ability to implicate, several prohibited acts under section 301 of the FD&C Act. For example, the failure to register in accordance with section 905 of the FD&C Act, the failure to provide any information required by section 905(i) of the FD&C Act, and the failure to provide a notice required by section 905(i)(3) of the FD&C Act constitute prohibited acts under section 301(p) of the FD&C Act (21 U.S.C. 331(p)). Additionally, prohibited acts under the FD&C Act also include: the introduction or delivery for introduction into interstate commerce of any tobacco product that is adulterated or misbranded (section 301(a)), the adulteration or misbranding of any tobacco product in interstate commerce (section 301(b)), and the receipt in interstate commerce of any tobacco product that is adulterated or misbranded, and the delivery or proffered delivery thereof for pay or otherwise (section 301(c)) (21 U.S.C. 331(a)-(c)). A tobacco product is deemed adulterated under section 902 of the FD&C Act when, for example, it is a tobacco product subject to a tobacco product standard under section 907 and it is not in conformity with such standard (section 902(6)) or it is required by section 910(a) to have premarket review and does not have an order in effect under section 910(c)(1)(A)(i) (section 902(6)) (21 U.S.C. 387b(5)-(6)). A tobacco product is misbranded under section 903 of the FD&C Act when, for example, it was manufactured, prepared, propagated, compounded, or processed in an establishment not duly registered under section 905(b), 905(c), 905(d), or 905(h) or if it was not included in a product list required by section 905(i) (section 903(a)(6)) (21 U.S.C. 387c(a)(6)). Violations relating to establishment registration and product listing are subject to regulatory action, including, but not limited to, civil money penalties, seizure, and injunction. Section 801(p)(1) of the FD&C Act requires FDA to provide an annual report to the Senate Committee on Health, Education, Labor and Pensions and to the House of Representatives Committee on Energy and Commerce (21 U.S.C. 381(p)(1)). This report must contain: (1) the nature, extent, and destination of United States tobacco product exports that do not conform to tobacco product standards established pursuant to the FD&C Act; (2) the public health implications of such exports, including any evidence of a negative public health impact; and (3) recommendations or assessments of policy alternatives available to Congress and the executive branch to reduce any negative public health impact caused by such exports. Under section 907 of the FD&C Act, FDA can adopt a tobacco product standard if it finds that the standard is appropriate for the protection of the public health (21 U.S.C. 387g). Section 909 of the FD&C Act permits FDA, by regulation, to require manufacturers and importers of tobacco products to establish and maintain records, make reports, and provide information to ensure that such tobacco products are not adulterated or misbranded, and to otherwise protect the public health (21 U.S.C. 387i). Section 910 of the FD&C Act sets forth requirements for the premarket submission of applications and authorization of certain tobacco products (21 U.S.C. 387j). Moreover, under section 910(g) of the FD&C Act, FDA has the authority to exempt by regulation tobacco products intended for investigational use from the provisions of Chapter IX of the FD&C Act (21 U.S.C. 387j(g)). Section 911 of the FD&C Act sets forth requirements for modified risk tobacco products, including product authorization and marketing (21 U.S.C. 387k). In addition, under section 701(a) of the FD&C Act, FDA has the authority to issue regulations for the efficient enforcement of the FD&C Act (21 U.S.C. 371(a)). V. Description of the Proposed Rule A. Scope (Proposed § 1108.1) Proposed § 1108.1 sets forth that the requirements of this part apply to domestic and foreign establishments that manufacture, prepare, compound, or process tobacco products that are subject to chapter IX of the FD&C Act. 4 Tobacco product manufacturers would include specification developers, third-party manufacturers, bulk tobacco product manufacturers, and repackagers/relabelers. 5 The proposed scope is discussed further in subsection C. Who Must Register and Submit a Tobacco Product List (Proposed § 1108.20) and subsection J. Establishment Registration and Tobacco Product Listing for Foreign Establishments Importing or Offering for Import Tobacco Products into the United States (Proposed § 1108.50). 4 The proposed rule would thus not apply to “premium cigars” that are not subject to chapter IX of the FD&C Act. By rulemaking, FDA has deemed all cigars, among other products, subject to chapter IX of the FD&C Act. On August 9, 2023, the U.S. District Court for the District of Columbia issued an order vacating that rule (generally referred to as the Deeming Rule) “insofar as it applies to premium cigars.” Cigar Ass'n of Am. v. FDA, No. 16-cv-01460, Dkt. No. 277 (D.D.C. Aug. 9, 2023). The court gave a definition that specified what constituted a premium cigar for the purposes of its ruling. On January 24, 2025, the U.S. Court of Appeals for the District of Columbia Circuit affirmed the district court's order, in part, and reversed and remanded the case back to the district court “so that the district court can invite briefing on the appropriate definition of `premium cigars.' ” Cigar Ass'n of Am. v. FDA, No. 23-5220, Document #2096141 (D.C. Cir. Jan. 24, 2025.). That litigation is pending. 5 Similar to the proposed rule entitled “Requirements for Tobacco Product Manufacturing Practice” (88 FR 15174, March 10, 2023), this proposed rule clarifies that persons who engage in the manufacture of a tobacco product include specification developers, third-party manufacturers, bulk tobacco product manufacturers, and repackagers/relabelers. For example, if a specification developer designs and establishes tobacco product specifications of a finished or bulk tobacco product and provides the specifications to a third-party manufacturer to physically manufacture the product, both the specification developer and the third-party manufacturer would be engaged in the manufacture of a tobacco product for purposes of this rule and would be required to comply with this proposed rule. B. Definitions (Proposed § 1108.3) Proposed § 1108.3 sets forth several proposed definitions applicable to this part. The definitions follow. The term “accessory” would be defined the same way it is in 21 CFR 1100.3. It would mean any product that is intended or reasonably expected to be used with or for the human consumption of a tobacco product; does not contain tobacco or nicotine, and is not made or derived from tobacco or nicotine from any source; and meets either of the following: (a) is not intended or reasonably expected to affect or alter the performance, composition, constituents, or characteristics of a tobacco product or (b) is intended or reasonably expected to affect or maintain the performance, composition, constituents, or characteristics of a tobacco product but (1) solely controls moisture and/or temperature of a stored tobacco product; or (2) solely provides an external heat source to initiate but not maintain combustion of a tobacco product. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). Examples of accessories are ashtrays, spittoons, hookah tongs, cigar clips and stands, and pipe pouches, because they do not contain tobacco or nicotine or are not derived from tobacco or nicotine from any source, and do not affect or alter the performance, composition, constituents, or characteristics of a tobacco product. Examples of accessories also include humidors or refrigerators that solely control the moisture and/or temperature of a stored product and conventional matches and lighters that solely provide an external heat source to initiate but not maintain combustion of a tobacco product. An electric heater or charcoal used for prolonged heating of waterpipe tobacco is not an accessory because it is used to maintain the combustion of the tobacco. The term “brand” would be defined the same way it is in section 900(2) of the FD&C Act (21 U.S.C. 387(2)). It would mean a variety of tobacco product distinguished by the tobacco used, tar content, nicotine content, flavoring used, size, filtration, packaging, logo, registered trademark, brand name(s), identifiable pattern of colors, or any combination of such attributes. For example, Company Q manufactures cigarettes under the following brand and subbrand names: “Acme Gold, Acme Blue, Bravo Red, and Bravo Green.” Company Q uses 100 percent burley tobacco for its Acme products and 100 percent flue-cured tobacco for its Bravo products. Since Company Q selected the product names primarily to distinguish the type of tobacco used in each, the company has chosen to market its cigarettes under two separate brands (“Acme” and “Bravo”) and indicates subbrands as Gold or Blue for Acme and Red or Green for Bravo. The term “brand owner” would be defined as a person that owns a brand, through creation, acquisition, trademark, patent, copyright, or otherwise, and has directly or through license, the control and/or direction of the brand. The term “bulk tobacco product” would be defined as a tobacco product not sealed in final packaging but otherwise suitable for consumer use as a tobacco product ( e.g., bulk cigarettes, bulk roll-your-own (RYO) tobacco, bulk pipe tobacco). The proposed definition of bulk tobacco product also includes components or parts of tobacco products that are not sealed in final packaging but are otherwise suitable for consumer use as tobacco products ( e.g., bulk filters, bulk e-liquids). Products that are suitable for consumer use as tobacco products are those products that do not require further processing by a tobacco product manufacturer, such as mixing, cutting, curing, blending, or adding components or parts, ingredients, additives and materials, before they can be used by a consumer. For example, an e-liquid not sealed in final packaging is suitable for consumer use as a tobacco product because it requires no additional processing by a tobacco product manufacturer before it can be used by a consumer in an ENDS device; it requires only final packaging and labeling to be a finished tobacco product. A product can be suitable for consumer use as a tobacco product even if it could undergo additional processing by a manufacturer, such as blending, as long as it does not require further processing by a manufacturer before use by a consumer. For example, coconut and pineapple flavored e-liquids not sealed in final packaging would be considered bulk tobacco products because they are suitable for consumer use as tobacco products, even if they might later be blended together by a manufacturer to make piña colada flavored e-liquid. The term “commercial distribution” would be defined the same way it is in 21 CFR 1107.12. It would mean any distribution of a tobacco product, whether domestic or imported, to consumers or to any person, but does not include interplant transfers of a tobacco product between establishments within the same parent, subsidiary, and/or affiliate company, nor does it include providing a tobacco product for product testing where such product is not made available for consumption or resale. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). This term would not include the handling or transfer of a tobacco product from one consumer to another for personal consumption. The term would have the same meaning for foreign establishments, but it would not include the distribution of any tobacco products that are neither imported nor offered for import into the United States. Finally, the definition would not include shipment of a tobacco product into a foreign trade zone if the product is then exported and not further distributed in the United States. The term “component or part” would be defined as any software or assembly of materials intended or reasonably expected: (a) to alter or affect the tobacco product's performance, composition, constituents, or characteristics; or (b) to be used with or for the human consumption of a tobacco product. Component or part excludes anything that is an accessory of a tobacco product. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). The term “domestic establishment” would be defined as an establishment in any State or Territory or possession of the United States. 6 This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). We note that this definition includes establishments on Tribal land. FDA respects tribal sovereignty and understands the importance of collaboration and consultation, as appropriate, with federally-recognized tribal governments. 6 As set forth by section 900(22) of the FD&C Act, the term `United States' means “the 50 States of the United States of America and the District of Columbia, the Commonwealth of Puerto Rico, Guam, the Virgin Islands, American Samoa, Wake Island, Midway Islands, Kingman Reef, Johnston Atoll, the Northern Mariana Islands, and any other trust territory or possession of the United States.” The term “establishment” would be defined as a place of business under one ownership at one general physical location, engaged in an operation described in § 1108.20(a). This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). Establishment would refer to both domestic and foreign establishments unless otherwise noted. This definition is similar to the one included in the registration and listing guidance. If a general physical location, such as a campus, includes multiple buildings under the same management, then it would not be necessary to register each building as a separate establishment. However, buildings in the same general physical location that have different management would need to be registered as separate establishments. The term “finished tobacco product” would be defined to mean a tobacco product, including all components and parts, sealed in final packaging intended for consumer use. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). Examples of finished tobacco products would include a pack of cigarettes, a can of moist snuff, and rolling papers, filters, filter tubes, or e-liquids sold to consumers. The term “foreign establishment” would be defined to mean an establishment other than a domestic establishment. The term “industry product identification number” would be defined to mean a unique, product-specific identifier or alphanumeric code, such as a universal product code (UPC), stock keeping unit (SKU), Item #, or Catalog #, that industry generates for internal record keeping and tracking. FDA intends to utilize an industry product identification number when corresponding with industry as a point of reference to help distinguish a specific product from other similar products made by the same manufacturer but with slight differences in product attributes (such as volume or quantity or packaging). The term “labeling” would be defined in a similar way as in section 201(m) of the FD&C Act (21 U.S.C. 321(m)). It would mean: all labels and other written, printed, or graphic matter (a) upon any tobacco product or any of its containers or wrappers; or (b) accompanying such tobacco product. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). The term “manufacturer” would be defined as any person who manufactures, prepares, compounds, or processes a tobacco product, including repackaging or relabeling of any tobacco product. Examples of manufacturing include assembling, processing, homogenizing, mixing, formulating, labeling, or packaging. Manufacturers include specification developers, third-party manufacturers, bulk tobacco product manufacturers, and repackagers/relabelers. For a manufacturer that is a specification developer, their establishment would be where the owner or operator develops the specifications. The term “material change” would be defined to include: (a) any change in the tobacco product name (including brand or subbrand), warnings, or instructions for use; (b) any change in the owner or operator, or establishment; (c) any other significant change with respect to consumer information, to other labeling, or to the advertisements for the tobacco product, such as changes to the logo(s), identifiable patterns of color, or product descriptors; (d) any change in the marketing authorization or status for the marketing of such product; and (e) any change with respect to whether or not the product is subject to a tobacco product standard established under section 907 of the FD&C Act (21 U.S.C. 387g). With respect to changes in consumer information or other labeling of the tobacco product, changes that are not significant include changes to grammar, correction of typographical errors that do not change the content of the labeling, and changes in tax stamp or bar code. A change in marketing authorization or status that would create a material change under this definition includes: a change in any pre-existing tobacco product status determination, such as, for example if a pre-existing tobacco product is determined to not have been on the market as of February 15, 2007 (under 910(a)(1)); all authorizations to legally market a tobacco product including an order finding that a new tobacco product is exempt from the requirements of substantial equivalence (SE) (21 CFR 1107); an SE order; a PMTA marketing granted order; a modified risk tobacco product application (MRTPA) order which allows a product to include a modified risk or exposure statement or a non-renewal of a modified risk order; a not substantially equivalent order for provisional products under 910(a)(2)(B)(i); or an order withdrawing or temporarily suspending authorization under 910(d) to legally market a product under 910(c)(1)(A)(i). The term “operator” would be defined to mean a person, as defined in section 201(e) of the FD&C Act, who has management authority over an establishment. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). The term “owner” would be defined to mean a person, as defined in section 201(e) of the FD&C Act, who has an ownership interest in an establishment. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). The term “Product Identification Number (PD #)” would be defined to mean the number that FDA assigns to each product within a submission to distinguish among the products included in that submission. A PD # is only relevant within the context of a specific Submission Tracking Number (STN). The term “Registration Identification Number (RGID #)” would be defined to mean the FDA-assigned unique identifier for a registered establishment's registration. The RGID # is assigned to each new electronic tobacco product registration and listing system submission and attaches to the establishment(s) and the product(s) in the initial submission. This information is important to ensure FDA and industry are referring to the same registered establishments and listed products. Updates to establishment registration and product list information would reference the RGID # from the initial FDA submission. The term “representative sampling of advertisements” would be defined to mean advertising material that gives a comprehensive picture of the promotional claims and campaigns in use for each tobacco product and which includes representative material from each medium being used to promote the product ( e.g., advertisements that appear in or on magazines, newspapers, direct mail materials, retail or point-of-sale displays, posters, billboards, and via internet and mobile communications, such as web pages, banner advertisements, and text messages). The term “specification developer” would be defined as a person who controls the design and development of a tobacco product or initiates or creates the specifications for the product. The term “Submission Tracking Number (STN)” would be defined to mean the number that FDA assigns to submissions that are received from an applicant, such as a PMTA, supplemental PMTA, SE reports, SE exemption requests (EX REQ), MRTPA, and submissions related to investigational tobacco products. The term “third-party manufacturer” would be defined as an entity, including a contract manufacturer, that physically manufactures a tobacco product on behalf of, or to specifications established by, another party, such as a brand owner or specification developer. The term “tobacco product” would be defined the same way as in section 201(rr) of the FD&C Act (21 U.S.C. 321(rr)). It would mean any product made or derived from tobacco, or containing nicotine from any source, that is intended for human consumption, including any component, part, or accessory of a tobacco product (except for raw materials other than tobacco used in manufacturing a component, part, or accessory of a tobacco product). The term “tobacco product” does not mean an article under the FD&C Act that is a drug (section 201(g)(1)), a device (section 201(h)), or a combination product (section 503(g)). The term “tobacco product” does not mean an article that is a food (section 201(f)) if such article contains no nicotine, or no more than trace amounts of naturally occurring nicotine. This definition is consistent with FDA's “Registration and Product Listing for Owners and Operators of Domestic Tobacco Product Establishments, Guidance for Industry” (revised March 2023). The term “Tobacco Product Number (TP #)” would be a product-specific number that is generated by FDA for each product listed on an establishment's registration. C. Who Must Register and Submit a Tobacco Product List (Proposed § 1108.20) Proposed § 1108.20(a) and (b) specify those persons who would be required to register and to submit a tobacco product list to FDA. This paragraph would require an owner or operator of an establishment, except those listed in § 1108.20(c), engaged in the manufacture, preparation, compounding, or processing of a tobacco product to register in accordance with section 905 of the FD&C Act. This includes any owner or operator of any domestic establishment that manufactures a tobacco product for export, as well as any owner or operator of any establishment engaged in the manufacture of free smokeless tobacco samples. Manufacturers of tobacco products also include specification developers, third-party manufacturers, bulk tobacco product manufacturers, and repackagers/relabelers. FDA is aware that some tobacco product manufacturers have established an organizational structure that places the specification development functions in an entity separate from the entity in charge of physically manufacturing the tobacco product; these entities develop and usually control changes to the specifications of the tobacco product. Such entities are specification developers under the proposed rule. If a specification developer designs, establishes, or provides the specifications of a tobacco product to another entity to physically manufacture the product, both the specification developer and the other entity would be engaged in the manufacture of tobacco products for purposes of this rule and would be required to comply with this proposed rule. Product design and the development of product specifications are integral parts of manufacturing. Additionally, owners or operators are required to register every domestic establishment engaged in the manufacture, preparation, compounding, or processing of tobacco products, whether those establishments are distributing their tobacco product into domestic commerce or exporting them. FDA has the authority to inspect these establishments regardless of the destination of their shipments, and registration and listing information helps FDA ensure that products produced by export-only manufacturers comply with the FD&C Act and applicable regulations. To avoid unnecessary duplicate registrations, proposed § 1108.20(a) would permit a parent, subsidiary, or affiliate company to submit registration information for all establishments when operations are conducted at more than one establishment and the establishments are under common or joint ownership or control, which is consistent with FDA's drug registration requirements for domestic and foreign establishments (see 21 CFR 207.17(a)). To reduce duplicative submissions, registration information for an establishment should be submitted by only one entity—the owner or operator of that establishment, or the establishment's parent, subsidiary, or affiliate establishment. Duplicate submissions would create unnecessary burden for the Agency in its submission review and create unnecessary work for registrants. For example, if the parent company has a subsidiary and an affiliate, the parent company can submit the registration information on behalf of the parent, the subsidiary, and the affiliate. Additionally, an owner or operator may authorize a third-party agent to register the establishment(s) on its behalf. Proposed § 1108.20(b) provides that every person who is required to register, as specified in § 1108.20(a), would also be required to submit a listing of all tobacco products that are being manufactured, prepared, compounded or processed by such person for commercial distribution, in accordance with section 905(i) of the FD&C Act and this proposed regulation. To reduce duplicative submissions, when operations are conducted at more than one establishment and the establishments are under common or joint ownership or control, this section would permit the parent, subsidiary, or affiliate company to submit listing information for all establishments. Proposed § 1108.20(c) specifies persons who would not be required to register their establishments or submit a tobacco product list. Proposed § 1108.20(c)(1) states that persons engaged only in manufacturing investigational use tobacco products where the product is not available for sale or distribution other than as part of an investigation would not be required to register their establishments or list their products. However, if a manufacturer manufactures products for both investigational use and for commercial distribution, that manufacturer would be required to register its establishment and would be required to list its tobacco products that are manufactured for commercial distribution. Proposed § 1108.20(c)(2) states that manufacturers of only raw materials, other than tobacco, used in manufacturing a component or part of a tobacco product would not be required to register their establishments or list their products. Examples of such raw materials would be unprocessed acacia gum (taken from a tree and not processed) and minted titanium dioxide (used for whitening cigarette and tipping paper). For example, a manufacturer that only produces acetate tow used in the manufacturing of a filter for a cigarette would not be required to register its establishment or list its products. However, a manufacturer of both a tobacco product and raw material would have to register the establishment and list the tobacco product. Proposed § 1108.20(c)(3) states that common carriers, in their receipt, carriage, holding, or delivery of a tobacco product in the usual course of business would not need to register their establishment or submit a tobacco product list. For example, a carrier for the United Parcel Service would typically be considered a common carrier under this proposed provision and, accordingly, would not be required to comply with the registration and listing requirements. Proposed § 1108.20(d) states that registration and listing of a product does not constitute an admission, agreement, or determination by FDA that a product is a tobacco product within the meaning of section 201(rr) of the FD&C Act (21 U.S.C. 321(rr)). In addition, registration and listing do not denote FDA authorization for the marketing of tobacco products in the United States within the meaning of sections 905 or 910 of the FD&C Act. Listed products that are subject to sections 905 and 910 of the FD&C Act are not authorized for the legal sale and distribution in the United States unless they have an FDA marketing authorization order in effect. D. When To Submit Establishment Registration and Tobacco Product Listing (Proposed § 1108.22) Proposed § 1108.22 prescribes when an owner or operator of an establishment would have to submit its initial establishment registration and tobacco product listing as well as the continuing obligations of owners and operators to submit this information. Proposed § 1108.22(a) provides that an owner or operator of a domestic establishment that has not previously engaged in an operation described in § 1108.20(a) would have to submit establishment registration and product listing information within five business days from first engaging in an operation described in § 1108.20(a). Section 905(c) requires domestic manufacturers to “immediately register” their establishments and list their products upon beginning any of these operations. We interpret “immediately” as used in section 905(c) to mean within five days from beginning the operation. This is the same interpretation of “immediately” that FDA has implemented for initial drug registration requirements for domestic establishments (see section 510(c) of the FD&C Act (21 U.S.C. 360(c)) and 21 CFR 207.21(a)). Section 905(h) requires foreign manufacturers to register “under regulations promulgated by the Secretary.” Proposed § 1108.22(a) provides that an owner or operator of a foreign establishment engaged in an operation described in proposed § 1108.20(a) would be required to submit establishment registration and tobacco product listing information before any tobacco product manufactured, prepared, compounded, or processed at the establishment is imported or offered for import into the United States, which also comports with FDA's initial drug registration requirements for foreign establishments (see 21 CFR 207.21(b)). Proposed § 1108.22(b) would require owners or operators to review, change as needed, or confirm there have been no changes to, their establishment registration and product listing information that is on file with FDA, documenting any changes that were not previously reported. Proposed § 1108.22(b) would also outline the submission timelines for these updates. Proposed § 1108.22(b)(1) would require that, by December 31st of each year, each owner or operator of an establishment engaged in an operation described in § 1108.20(a) must register each of its establishments, and certify that all information associated with the registered establishments and its listed products is accurate and up to date. Each owner or operator of a registered establishment would need to review, change as needed, or confirm there have been no changes to, the registered establishment information and listed products. Annual registration would still be required even to confirm that there have been no changes. Proposed § 1108.22(b)(2) would require each owner or operator of an establishment engaged in an operation described in § 1108.20(a) to review, change as needed, or confirm there have been no changes to their tobacco product listing information on file with FDA in June and December of every year. Owners or operators would be required to report any changes or deletions to listings previously reported, including any material changes to product listings previously reported, as described in § 1108.28, and list any new products not previously reported. For example, if the labeling for a product is changed in October, the product listing information would have to be changed accordingly in December of the same year. This information would be used to help ensure the products marketed are in compliance with the FD&C Act and its implementing regulations. E. Information Required for Tobacco Product Establishment Registration and Tobacco Product Listing (Proposed § 1108.24) Proposed § 1108.24 would contain the requirements for an owner or operator to submit information about their establishment and tobacco products. The Tobacco Control Act and its implementing regulations establish a framework that enables FDA to request and receive information on establishment registration and tobacco product listing, and to set up systems through which FDA would have an integrated picture of the tobacco product distribution system. As a part of FDA's central information system, this proposed rule addresses the need for information on which domestic and foreign establishments manufacture a tobacco product or tobacco products distributed in the United States; which tobacco product each establishment handles; and how each establishment can be contacted. This information helps facilitate communication between the Agency and tobacco product establishments and is important for FDA to schedule and plan statutorily required inspections of registered establishments. This information would help FDA identify establishments operating in violation of the FD&C Act, such as those manufacturing products that are adulterated or misbranded under sections 902 and 903 of the FD&C Act or products that are non-compliant with FDA's premarket authorization requirements under section 910 of the FD&C Act, or to facilitate the recall of non-compliant tobacco products that have entered United States commercial distribution. For example, FDA has used registration and listing information from domestic establishments that have initiated recalls to determine the depth of recall for the establishment's recall strategy and for FDA to verify the effectiveness of the recall depth specified by the strategy. This information would likewise facilitate the recall strategy and effectiveness checks for foreign establishments that initiate recalls. Proposed § 1108.24(a) would contain the establishment registration information required, if applicable, to be submitted to FDA using FDA's electronic tobacco product registration and listing system, except as provided in § 1108.40(b). Proposed § 1108.24(a)(1) would require the full name, physical address, mailing address, and contact information for the establishment. Proposed § 1108.24(a)(2) would require the name, address, phone number, fax number, and email address of the owner and operator; if a partnership, the name of each partner; if a corporation, the place of incorporation and the name of each corporate officer and director; any trade names used by the owner and operator or other names under which the owner and operator conducts business or additional names by which the owner and operator is known. This information is important for FDA to efficiently coordinate inspections under section 905(g) of the FD&C Act, including by reducing duplication of registered establishments. Proposed § 1108.24(a)(3) would require the name, address, phone number, fax number, and email address of the official correspondent designated by the owner or operator. This information is necessary in order for FDA to efficiently correspond on issues regarding the registration and listing submissions. Proposed § 1108.24(a)(4) would require any trade names used by the establishment or other names under which the establishment conducts business or additional names by which the establishment is known. This information would allow FDA to reduce duplication and properly identify establishments to determine whether they are properly registered and would eliminate confusion if an establishment is known by multiple names or if different establishments are known by similar names. Proposed § 1108.24(a)(5) would require the establishment's website address(es) that concern tobacco products. This information is important to enable FDA to determine that tobacco products being manufactured for distribution are in compliance with the FD&C Act and applicable regulations. For example, FDA would be better able to determine whether such activities render a product misbranded under the FD&C Act or reflect the marketing of an unlisted or unauthorized product. Although this would only apply to manufacturers at this time, FDA would consider expanding this type of requirement to other entities that have websites that market tobacco products. Proposed § 1108.24(a)(6) would require the RGID # of the establishment, if previously assigned by FDA. This information is important to ensure FDA and industry are referring to the same registered establishments and listed products and is needed as a point of reference when processing registration and product listing updates, including when a waiver has been obtained for paper submission. Proposed § 1108.24(a)(7) would require the FDA Establishment Identifier (FEI) number if FDA previously assigned one to the establishment. FDA would provide an FEI number if the establishment has not been assigned one. Proposed § 1108.24(a)(7) would also allow optional submission of another unique identifier, such as a Data Universal Numbering System (DUNS) Number, for the place of business of the owner, the place of business of the operator, and the location of the establishment. If submitted, this information would help FDA determine whether an establishment has been duly registered and to distinguish between registered establishments, especially if they have similar names. Lastly, proposed § 1108.24(a)(8) would require the name of the Tribe if the establishment is located on Indian Country. The name of the Tribe for establishments located on Indian Country would help FDA coordinate compliance directly with the appropriate tribal government and respect statutory limits on contracting with third parties for inspections in Indian Country. FDA is considering requiring establishments to provide additional contact information in their registration. The Agency requests comments on whether to also require the name, address, and contact information for the establishment's direct accounts, if applicable. Because tobacco products move through direct accounts, knowing those accounts would be helpful for FDA to verify compliance, facilitate the identification of adulterated or misbranded tobacco products that have entered commercial distribution, and take prompt compliance and enforcement actions when warranted. FDA also requests comments on whether to require the name, address, phone number, fax number, email address, and contact information for the establishment's importers and consignees, if applicable. Section 905(h) of the FD&C Act requires registration of foreign establishments whose products are imported or offered for import into the United States. Importer and consignee information would help FDA determine whether imported tobacco products originate from registered establishments and would help FDA identify such products that may be in commercial distribution, including those that may be adulterated or misbranded under sections 902 and 903 of the FD&C Act. FDA also requests comments on whether to require, for any tobacco product brand manufactured by the establishment that is not owned by the establishment, the name, address, phone number, fax number, email address, and contact information for the establishment's tobacco product brand owners. Requiring contact information for tobacco product brand owners would ensure that FDA can associate all manufacturers of finished and bulk tobacco products with brand owners. Section 905 of the FD&C Act requires owners or operators to register each establishment engaged in the manufacture, preparation, compounding, or processing of a tobacco product. Because brand owners may contract out these functions while retaining ultimate control over the product, the information that would be required would enable FDA to identify the brand owners on whose behalf manufacturers are producing a specific tobacco product. This information would help FDA identify the entity responsible for marketing or introducing such products into commercial distribution, including tobacco products that may be adulterated or misbranded under sections 902 and 903 of the FD&C Act. FDA also requests comments on whether to require the name, address, phone number, fax number, email address, and contact information for the establishment's tobacco product specification developers, if any. As discussed in proposed § 1108.20(a), manufacturers of tobacco products include specification developers, so specification developers would be required to register their establishments and list their tobacco products. Because specification developers exercise functional control over product design and specifications, even if physical manufacturing is performed by another manufacturer, requiring the specification developer's contact information would help FDA associate manufacturers that physically manufacture finished and bulk tobacco products with the manufacturers that develop their specifications. To this end, this information would help FDA efficiently identify establishments operating in violation of the FD&C Act, such as products that are adulterated or misbranded under sections 902 and 903 of the FD&C Act, or products that are non-compliant with FDA's premarket authorization requirements under section 910 of the FD&C Act, or to facilitate the recall of non-compliant tobacco products that have entered United States commercial distribution. FDA requests comments on whether to require the brand owner, direct account, consignee, and importer information described above that the Agency is considering requiring, or any other information, and the reasons why. Proposed § 1108.24(b) would provide that owners or operators of tobacco product establishments who have been granted a waiver under § 1108.40(b) from filing electronically through FDA's tobacco product registration and listing system must submit the information required by § 1108.24(a) in paper form using the procedures provided by FDA in accordance with § 1108.40(c). Proposed § 1108.24(c) would require the owner or operator to designate an official correspondent for the registration to serve as their point of contact with FDA on issues relating to establishment registration and listing of tobacco products. Similar to what is recommended by the R&L Guidance, proposed § 1108.24(c)(1) and (c)(2) state that the official correspondent would be responsible for electronically transmitting to FDA all required registration and listing information unless a waiver from electronic submission has been granted in accordance with § 1108.40(b) as well as serving as a liaison for all correspondence with FDA concerning registration and listing. FDA is proposing to require identification of an official correspondent for two reasons. First, an official correspondent is important to help FDA ensure adequate notice is provided to registrants through official Agency communications. As such, the designation of an official correspondent provides the agency with an official contact who can receive the information or documentation on behalf of the registrant. Second, identification of an official correspondent would assist FDA in communication with the registrant and help the Agency to efficiently process submissions and avoid delays. An official correspondent would act as a communications link between FDA and the registrant and would facilitate timely correspondence between FDA and the registrant, including responding to questions concerning registrations. Proposed § 1108.24(d) would provide that the designation of an official correspondent does not in any manner affect the liability of the owner or operator of the establishment or any other individual under section 301(p) of the FD&C Act or any other provision of the FD&C Act and its implementing regulations. Proposed § 1108.24(e) would require owners or operators to submit listing information identified in paragraphs (e)(1) through (e)(10) for each tobacco product manufactured, prepared, compounded, or processed for commercial distribution. This information is important for FDA to identify the specific tobacco products that are being manufactured at each establishment. For example, FDA would be able to determine whether the same or similar products are being marketed under different brands or subbrands of tobacco products. The information must be submitted electronically through FDA's tobacco product registration and listing system unless FDA grants a waiver from electronic submission under § 1108.40(b). Proposed § 1108.24(e)(1) would require each listing to include the current electronic tobacco product registration and listing system RGID # and the name of each establishment. The RGID # and name of each establishment would help FDA identify the products manufactured at that establishment, especially where multiple establishments have similar names. In the case of an owner or operator with multiple establishments, FDA would be able to use the manufacturing location to determine where to inspect to determine each tobacco product's compliance with the requirements of the FD&C Act. FDA would assign a RGID # to the initial establishment registration and product list submission. Any subsequent new establishment with the same owner and/or operator which begins performing a tobacco product manufacturing activity would be added by the registrant under that RGID #. Proposed § 1108.24(e)(2) would require the name, including brand and subbrand name, or other commercial name(s) used in commercial distribution, for each tobacco product the registrant manufactures, prepares, compounds, or processes at a registered establishment. Proposed § 1108.24(e)(3) would require the uniquely identifying information for each tobacco product the registrant manufactures, prepares, compounds, or processes, including product category, product subcategory, and product properties as provided in Table 1 below. If the product does not have a particular listed product property, such as filter ventilation percentage or characterizing flavor, the application would need to state “none” for that property. If a tobacco product listing did not include uniquely identifying information required under proposed § 1108.24(e)(3), the listing would not be complete. FDA is proposing that uniquely identifying information would include the following: • Product category ( e.g., cigarette, smokeless tobacco product); • Product subcategory ( e.g., filtered cigarettes, loose moist snuff); • Package type ( e.g., hard pack or soft pack, plastic bag); • Product quantity or count ( e.g., 15 grams (g), 10 pouches); • Portion size ( e.g., 1.5 g/pouch); • Length for cigarettes, cigarette tubes, rolling paper, paper tips, filters, and other tobacco products that contain this property; • Width of rolling paper and other tobacco products that contain this property; • Diameter of cigarettes, cigarette tubes, filters, and other tobacco products for which this property may be calculated; • Filter ventilation percentage of cigarettes, filtered cigarette tubes, paper tips, filters, and other tobacco products that contain this property; • E-liquid volume ( e.g., 0.5 ml, 2.0 ml); • Nicotine concentration ( e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 0.2 mg/e-cigarette); • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none); • Propylene glycol (numeric value) and vegetable glycerin (numeric value) ( e.g., N/A, 0/100, 50/50, 100/0); • Wattage ( e.g., 100 W, 200 W); • Battery capacity ( e.g., 100 mAh, 200 mAh); • Characterizing flavor(s) ( e.g., menthol, tobacco, strawberry, grape, orange, clove, cinnamon, pineapple, vanilla, coconut, licorice, cocoa, chocolate, cherry, coffee, unflavored), which is from the packaging or other labeling if applicable; and • Additional properties needed to uniquely identify the tobacco product (if applicable). The following table is not exhaustive and does not encompass all potential products and their uniquely identifying properties and is intended to serve as an example. Table 1—Elements of Uniquely Identifying Information by Tobacco Product Category and Subcategory Tobacco product category Tobacco product subcategory Product properties Cigarettes • Filtered • Package type ( e.g., hard pack, soft pack, clam shell). • Product quantity ( e.g., 20 cigarettes, 25 cigarettes). • Length ( e.g., 89.1 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Filter ventilation percentage ( e.g., none, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigarettes • Non-filtered • Package type ( e.g., hard pack, soft pack, clam shell). • Product quantity ( e.g., 20 cigarettes, 25 cigarettes). • Length ( e.g., 89.1 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Filter ventilation percentage ( e.g., none, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigarettes • Other • Package type ( e.g., hard pack, soft pack, clam shell). • Product quantity ( e.g., 20 cigarettes, 25 cigarettes). • Length ( e.g., 89.1 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.125 mm). • Filter ventilation percentage ( e.g., none, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Roll-Your-Own Tobacco Filler • Package type ( e.g., bag, pouch). • Product quantity ( e.g., 20.1 g, 16.0 oz). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Rolling Paper • Package type ( e.g., box, booklet). • Product quantity ( e.g., 50 sheets, 200 papers). • Length ( e.g., 79.1 mm, 100.0 mm, 110.2 mm). • Width ( e.g., 28.1 mm, 33.0 mm, 45.2 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Cigarette Tube, Filtered • Package type ( e.g., bag, box) • Product quantity ( e.g., 100 tubes, 200 tubes). • Length ( e.g., 89 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Filter ventilation percentage ( e.g., none, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Cigarette Tube, Non-filtered • Package type ( e.g., bag, box). • Product quantity ( e.g., 100 tubes, 200 tubes). • Length ( e.g., 89.1 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Filter • Package type ( e.g., bag, box). • Product quantity ( e.g., 100 filters, 200 filters). • Length ( e.g., 8.0 mm, 12.1 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Paper Tip • Package type ( e.g., bag, box). • Product quantity ( e.g., 200 tips, 275 tips). • Length ( e.g., 12.0 mm, 15.1 mm). • Width ( e.g., 27.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). RYO tobacco • Other • Package type ( e.g., bag, box). • Product quantity ( e.g., 200 tips, 100 filters, 200 tubes). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Moist Snuff, Loose • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity ( e.g., 20.0 g, 2.1 oz). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Moist Snuff, Portioned • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity ( e.g., 22.5 g, 20.0 g). • Portion count ( e.g., 15 pouches, 20 pieces). • Portion mass ( e.g., 1.5 g/pouch, 1.0 g/piece). • Portion length ( e.g., 15.0 mm, 20.1 mm). • Portion width ( e.g., 10.0 mm, 15.1 mm). • Portion thickness ( e.g., 5.0 mm, 7.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Snus, Loose • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity ( e.g., 20.0 g, 2.1 oz). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Snus, Portioned • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity (22.5 g, 20.0 g). • Portion count ( e.g., 15 pouches, 20 pieces). • Portion mass ( e.g., 1.5 g/pouch, 1.0 g/piece). • Portion length ( e.g., 15.0 mm, 20.1 mm). • Portion width ( e.g., 10.0 mm, 15.1 mm). • Portion thickness ( e.g., 5.0 mm, 7.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Dry Snuff, Loose • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity ( e.g., 20.0 g, 2.1 oz.) • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Dissolvable • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity ( e.g., 22.5 g, 20.0 g). • Portion count ( e.g., 15 sticks, 20 pieces). • Portion mass ( e.g., 1.5 g/strip, 1.0 g/piece). • Portion length ( e.g., 10.0 mm, 15.1 mm). • Portion width ( e.g., 5.0 mm, 8.1 mm). • Portion thickness ( e.g., 3.0 mm, 4.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Chewing Tobacco, Loose • Package type ( e.g., bag, pouch, wrapped). • Product quantity ( e.g., 20.0 g, 3.1 oz). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Chewing Tobacco, Portioned • Package type ( e.g., plastic can with metal lid, plastic can with plastic lid). • Product quantity (22.5 g, 20.0 g). • Portion count ( e.g., 10 bits). • Portion mass ( e.g., 2.1 g/bit). • Portion length ( e.g., 8.0 mm, 10.1 mm). • Portion width ( e.g., 6.0 mm, 8.1 mm). • Portion thickness ( e.g., 5.1 mm, 7.0 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). Smokeless tobacco • Other • Package type ( e.g., bag, box, can). • Product quantity ( e.g., 20.1 g, 22.5 g, 3.0 oz.). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • E-Liquid, Open • Package type ( e.g., bottle, box, pod). • Product quantity ( e.g., 1 bottle, 5 bottles). • E-liquid volume ( e.g., 0.5 ml, 2.0 ml, 5.1 ml). • Nicotine concentration ( e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 0.2 mg/bottle). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Propylene glycol (PG)/vegetable glycerin (VG) ratio ( e.g., not applicable [N/A], 0/100, 50/50, 100/0). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • E-Liquid, Closed • Package type ( e.g., cartridge, pod). • Product quantity ( e.g., 1 cartridge, 5 cartridges). • E-liquid volume ( e.g., 0.5 ml, 2.0 ml, 5.1 ml). • Nicotine concentration ( e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 2.0 mg/bottle). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • PG/VG ratio ( e.g., N/A, 0/100, 50/50, 100/0). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • E-Cigarette, Closed • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 e-cigarette, 5 e-cigarettes). • Length ( e.g., 100.0 mm, 120.0 mm). • Diameter ( e.g., 6.0 mm, 8.0 mm). • Wattage ( e.g., 100 W, 200 W). • Battery capacity ( e.g., 100 mAh, 200 mAh). • E-liquid volume ( e.g., 0.5 ml, 2.0 ml, 5.1 ml). • Nicotine concentration ( e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 0.2 mg/e-cigarette). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • PG/VG ratio ( e.g., N/A, 0/100, 50/50, 100/0). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • E-Cigarette, Open • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 e-cigarette, 5 e-cigarettes). • Length ( e.g., 100.0 mm, 120.0 mm). • Diameter ( e.g., 6.0 mm, 8.0 mm). • E-liquid volume ( e.g., 0.5 ml, 2.0 ml, 5.1 ml). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Wattage ( e.g., 100 W, 200 W). • Battery capacity ( e.g., 100 mAh, 200 mAh). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • ENDS Component • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 coil). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry, wintergreen). • Additional properties needed to uniquely identify the tobacco product (if applicable). ENDS • ENDS Other • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 e-cigarette, 5 bottles). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, cherry, wintergreen, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Cigar, Filtered Sheet-Wrapped • Package type ( e.g., hard pack, soft pack, clam shell). • Product quantity ( e.g., 20 filtered cigars, 25 filtered cigars). • Length ( e.g., 89.1 mm, 100.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Filter ventilation percentage ( e.g., none, 0%, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor ( e.g., unflavored, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Cigar, Unfiltered Sheet-Wrapped • Package type ( e.g., box, film sleeve). • Product quantity ( e.g., 1 cigar, 5 cigarillos). • Length ( e.g., 100.1 mm, 140.0 mm). • Diameter ( e.g., 8.0 mm, 10.1 mm). • Tip ( e.g., none, wood tips, plastic tips). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor ( e.g., unflavored, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Cigar, Unfiltered Leaf-Wrapped • Package type ( e.g., box, film, sleeve, none). • Product quantity ( e.g., 1 cigar, 5 cigars). • Length ( e.g., 150.1 mm, 200.0 mm). • Diameter ( e.g., 8.0 mm, 10.1 mm). • Wrapper material ( e.g., burley tobacco leaf, Connecticut shade grown tobacco leaf). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor ( e.g., unflavored, whiskey). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Cigar Component • Package type ( e.g., box, booklet). • Product quantity ( e.g., 10 wrappers, 20 leaves). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor ( e.g., unflavored, menthol, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Cigar Tobacco Filler • Package type ( e.g., bag, pouch). • Product quantity ( e.g., 20.0 g, 16.1 oz.). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor ( e.g., unflavored, menthol, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Cigars • Other • Package type ( e.g., box, booklet). • Product quantity ( e.g., 1 cigar, 5 cigars, 20 leaves, 16 g). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Pipe Tobacco Products • Pipe • Package type ( e.g., box, none). • Product quantity ( e.g., 1 pipe). • Length ( e.g., 200.0 mm, 300.1 mm). • Diameter ( e.g., 25.1 mm). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol, cavendish, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Pipe Tobacco Products • Pipe Tobacco Filler • Package type ( e.g., bag, none). • Product quantity ( e.g., 20.0 g, 16.1 oz). • Tobacco cut style ( e.g., standard cut, such as shag cut, bugler cut, loose cut, etc., or a pressed cut, such as flake, cube cut, roll cake, etc., or a mixture). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol, cavendish, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Pipe Tobacco Products • Pipe Component • Package type ( e.g., box, bag, none). • Product quantity ( e.g., 1 bowl, 1 stem, 100 filters). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Pipe Tobacco Products • Other • Package type ( e.g., bag, box, none). • Product quantity ( e.g., 1 pipe). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Waterpipe Tobacco Products • Waterpipe • Package type ( e.g., box, none). • Product quantity ( e.g., 1 waterpipe). • Height ( e.g., 200.0 mm, 500.1 mm). • Width ( e.g., 100.1 mm, 300.0 mm). • Diameter ( e.g., 100.1 mm, 300.0 mm). • Number of hoses ( e.g., 1, 2, 4). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored). • Additional properties needed to uniquely identify the tobacco product (if applicable). Waterpipe Tobacco Products • Waterpipe Tobacco Filler • Package type ( e.g., bag, pouch). • Product quantity ( e.g., 20.0 g, 16.1 oz.). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, apple). • Additional properties needed to uniquely identify the tobacco product (if applicable). Waterpipe Tobacco Products • Waterpipe Heat Source • Package type ( e.g., box, film sleeve, bag, none). • Product quantity ( e.g., 150.0 g, 680.0 g). • Portion count ( e.g., 20 fingers, 10 discs, 1 base). • Portion mass ( e.g., 15.0 g/finger, 10.0g/brick). • Portion length ( e.g., 40.0 mm, 100.0 mm). • Portion width ( e.g., 10.0 mm, 40.0 mm). • Portion thickness ( e.g., 10.0 mm, 40.0 mm). • Source of energy ( e.g., charcoal, battery, electrical). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol, apple). • Additional properties needed to uniquely identify the tobacco product (if applicable). Waterpipe Tobacco Products • Waterpipe Component • Package type ( e.g., bag, box, none). • Product quantity ( e.g., 1 base, 1 bowl, 1 hose, 10 mouthpieces). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Waterpipe Tobacco Products • Waterpipe Other • Package type ( e.g., bag, box, none). • Product quantity ( e.g., 1 base, 1 bowl, 1 hose, 10 mouthpieces). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). Heated Tobacco Products (HTP) • Closed HTP • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 device, 1 HTP). • Length ( e.g., 100.0 mm, 120.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Wattage ( e.g., 100 W, 200 W). • Battery capacity ( e.g., 100 mAh, 200 mAh). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored). • Additional properties needed to uniquely identify the tobacco product (if applicable). Heated Tobacco Products (HTP) • Open HTP • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 device, 1 HTP). • Length ( e.g., 100.0 mm, 120.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Wattage ( e.g., 100 W, 200 W). • Battery capacity ( e.g., 100 mAh, 200 mAh). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored). • Additional properties needed to uniquely identify the tobacco product (if applicable). Heated Tobacco Products (HTP) • HTP Consumable • Package type ( e.g., hard pack, soft pack, plastic clamshell). • Product quantity ( e.g., 20 sticks, 25 cartridges). • Length ( e.g., 60.0 mm, 82.0 mm). • Diameter ( e.g., 6.0 mm, 8.1 mm). • Filter ventilation percentage ( e.g., none, 10.0%, 25.0%). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Heated Tobacco Products (HTP) • HTP Component • Package type ( e.g., box, none, plastic clamshell). • Product quantity ( e.g., 1 mouthpiece, 1 spacer). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Heated Tobacco Products (HTP) • Other • Package type ( e.g., box, bag, plastic clamshell, none). • Product quantity ( e.g., 1 base, 5 capsules). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol). • Additional properties needed to uniquely identify the tobacco product (if applicable). Other Tobacco Products • Other • Package type ( e.g., box, bag, plastic clamshell, none). • Product quantity ( e.g., 1 base, 5 capsules). • Nicotine source ( i.e., tobacco-derived nicotine (TDN), non-tobacco derived nicotine (NTN), both, or none). • Characterizing flavor(s) ( e.g., unflavored, tobacco, menthol, cherry). • Additional properties needed to uniquely identify the tobacco product (if applicable). This information would enable the Agency to accurately identify each individual tobacco product in commercial distribution. Additionally, this information would allow for a 1:1 comparison to link tobacco products across submissions ( e.g., ingredient listings, harmful and potentially harmful constituent listings, premarket orders). This would increase the efficiency with which FDA would be able to process those submissions. We seek comments on other unique identification elements to require for cigars, pipes, waterpipes, ENDS, and other tobacco products beyond those identified in Table 1. Please specifically identify the elements FDA should require and why they are needed to uniquely identify the product. Proposed § 1108.24(e)(4) would require tobacco product listing information to include the FDA-assigned TP #, for updates to previous product list submissions, and the industry-assigned UPC. If a UPC number is not available, an alternative industry product identification number, to include the number itself and the type of identifier ( e.g., SKU, Item #, or Catalog #) must be provided in lieu of the UPC. The UPC is obtained and implemented by the manufacturer or brand owner as a globally unique identifier for each individual product or product variation ( e.g., different colors, sizes, or flavors of the same product). SKU and catalog/item numbers typically have a more limited scope for tracking product inventory or a general product line and may vary according to a retailer or manufacturer's needs. Proposed § 1108.24(e)(5) would require the tobacco product listing information to include all FDA-assigned STNs, if any. STN would be defined to mean the number that FDA assigns to submissions that are received from an applicant, such as a PMTA, supplemental PMTA, SE reports, SE EX REQ, MRTPA, and submissions related to investigational tobacco products. Proposed § 1108.24(e)(6) would require the FDA-assigned Product Identification Number (PD #), if any. The PD # would be defined to mean the number that FDA assigns to each product within a submission to distinguish among the products included in that submission. A PD # is only relevant within the context of a specific STN. The FDA-assigned STN and PD #, if any, are required because section 905(i)(1)(A) of the FD&C Act sets forth that a listed tobacco product subject to a tobacco product standard established under section 907 of the FD&C Act or which is subject to section 910 of the FD&C Act must provide a reference to the authority for the marketing of the tobacco product. Proposed § 1108.24(e)(7) would require the listing to include the operations or processes that are conducted or done to the tobacco product at the establishment ( e.g., compounding, repackaging, relabeling, remanufacturing, processing, contract manufacturing, specification development, manufacturing for export, or manufacturing activities other than those listed). This information would allow FDA to understand the stage of the manufacturing process that occurs for each tobacco product at each establishment location, which can help direct FDA inspections, aid in potential recalls, and assist with any enforcement actions. Additionally, the information would allow FDA to better prepare for each upcoming inspection. For example, a smokeless tobacco product may have manufacturing that occurs in one location, repackaging that occurs in a second location, and relabeling that occurs in a third location. The proposed requirement would require each establishment to list the operation or process that occurs at the establishment. Proposed § 1108.24(e)(8) would require that the listing for a tobacco product manufactured in any domestic establishment for export that does not conform to tobacco product standards established pursuant to section 907 of the FD&C Act to include: (1) The manner in which the product does not conform to applicable tobacco product standards, (2) the destinations of the exported tobacco products for the previous year, and (3) the quantity of the product shipped to each country during the previous year. This information would need to be provided in the June biannual listing update required by § 1108.22(b)(2) and would assist FDA in preparing its tobacco product export report to Congress required under section 801(p) of the FD&C Act. Proposed § 1108.24(e)(9) would require, per section 905(i)(1)(A) of the FD&C Act, registrants to submit, for a tobacco product subject to a tobacco product standard established under section 907 of the FD&C Act or which is subject to section 910 of the FD&C Act for any new tobacco product, a reference to the authority for the marketing of the tobacco product (the submitter would have a list to choose from to indicate the type of market authorization status, such as a marketing granted order, SE order, SE exemption order, and would be able to enter STN as free text, as applicable), a legible, full color copy of all labeling for the product, indication of the category ( e.g., labeling) of material being submitted and the associated product(s), and the original date the labeling materials were first disseminated and date when their dissemination was discontinued. Proposed § 1108.24(e)(10) would require registrants to submit, for all tobacco products not covered by paragraph (9), a legible, full color copy of all consumer information and other labeling for the product, a representative sampling of advertisements for the product, indication of the category ( i.e., labeling, advertising, consumer information) of material being submitted and the associated product(s), and the original date the materials were first disseminated and date when their dissemination was discontinued. For labeling under §§ (9) and (10), only one representative package label need be submitted where differences exist only in the bar code, tax stamp, or pricing sticker. A material change to product labeling would require resubmission. Resubmission would not be required if the labeling change is insignificant ( e.g., pertains only to grammar, non-substantial typographical errors, or to the tax stamp or bar code). The dates of dissemination will facilitate FDA's surveillance of labeling and advertising by helping FDA determine when a tobacco product with violative labeling is being sold and when violative advertising for a tobacco product is in use. This information will enable FDA to more efficiently and effectively identify violations for current tobacco product labeling and advertising and pursue compliance and enforcement as appropriate. For example, if in its review FDA identifies evidence of a violation in labeling and/or advertising for a tobacco product ( e.g., product labeling indicating that the product presents a reduced health risk without a modified risk tobacco product order in effect, or labeling that is false or misleading), the dates of dissemination will help FDA target its surveillance to determine whether the violative labeling is for a product currently being sold and whether the violative advertising is currently being used. This information, in turn, will help FDA more effectively ensure compliance with the requirements of the law and take enforcement action as appropriate. Currently, FDA reviews advertisements to help determine whether the advertisements and the product comply with the requirements in the FD&C Act. The representative sampling of advertisements must include representative material from each medium being used to promote the product, such as advertisements that appear in or on magazines, newspapers, direct mail material, retail or point-of-sale displays, posters, billboards, and via internet and mobile communications ( e.g., web pages, banner advertisements, text messages). For example, if more than one magazine advertisement is used for a brand of tobacco product, only one would need to be submitted, provided the promotional message is the same and the overall presentation only differs superficially, such as in background color, font type or border style. In addition, the proposed requirement would require the product listing to include a copy of all consumer information. Consumer information would not include information directed at wholesalers, distributors, or retailers, where such information is not available to consumers or the public ( i.e., potential consumers). Proposed § 1108.24(f) states per section 905(i)(1)(C) of the FD&C Act that, upon FDA's request, each owner or operator must submit: (1) A brief statement of the basis of the determination, if the registrant has determined that a tobacco product being listed is not subject to a tobacco product standard established under section 907 of the FD&C Act, and (2) for good cause, a copy of all advertisements for a particular tobacco product not subject to a standard established under 907 of the FD&C Act or to section 910 of the FD&C Act. The required information would be required to be submitted within 30 calendar days of FDA's request. FDA requests comments on whether to require an owner or operator that has manufactured a tobacco product for distribution under a label other than its own to submit, upon request by FDA, the names of all distributors for whom it has been manufactured. This requirement would help FDA to efficiently and effectively ensure that currently marketed tobacco products are not adulterated or misbranded and protect the public health, by enabling FDA, for example, to identify, locate, and take appropriate action regarding violative tobacco products, including in the event of a recall. F. Maintaining a Historical File (Proposed § 1108.26) We believe the creation and maintenance of a historical file is reasonably required under section 909 of the FD&C Act for FDA to ensure that the tobacco product is not adulterated or misbranded and to otherwise protect the public health. First, we believe this information is necessary for FDA to have access to a complete and accurate picture of the consumer information, labeling, and advertisements for the tobacco product, to more effectively and efficiently ensure compliance with the requirements of the FD&C Act and its implementing regulations, which is necessary for the protection of the public health. Further, a historical file is necessary to ensure that the manufacturer can adequately comply with an FDA request made under section 905(i)(1)(B) of the FD&C Act, which allows FDA to request for good cause “a copy of all advertisements for a particular tobacco product.” Moreover, the requirement for a historical file would not be unduly burdensome, taking into account that most manufacturers likely already maintain records of the labeling, advertising, and consumer information that a historical file would contain. FDA has observed on inspections of tobacco product manufacturers that most manufacturers are maintaining these types of records. A historical file would help FDA to determine whether the labeling or advertising would render a tobacco product adulterated or misbranded. Under sections 903(a)(1) and (a)(7) of the FD&C Act, a tobacco product is misbranded if its labeling or advertising, respectively, is false or misleading in any particular, and under section 902(8) of the FD&C Act, a tobacco product is deemed adulterated if it is in violation of section 911 of the FD&C Act. A historical file would enable FDA and registrants to evaluate compliance across all labeling and advertising, whether included in a representative sample or not. For example, FDA may make a determination that a piece of advertising contained in the representative sample submitted to FDA indicates that a product is being marketed as a modified risk tobacco product without a modified risk tobacco product order from the FDA order in effect. This would violate section 911 of the FD&C Act and render a tobacco product adulterated under section 902(8) of the FD&C Act. FDA may also determine, for instance, that a piece of labeling or advertising contains a claim that is false or misleading, which would render a product misbranded under section 903(a)(1) or section 903(a)(7)(A) of the FD&C Act. In either instance, without a historical file, the registrant may not be able to review all similar pieces of advertising or labeling to bring its product into compliance. A historical file would also enable FDA to determine whether changes to such labeling and advertising necessary to bring the product into compliance are made across all consumer information and other labeling and advertising. For example, a historical file could contain advertising first disseminated in previous years, and that continues to be disseminated for tobacco products sold or distributed to consumers but was not submitted under section 905(i) of the FD&C Act. A historical file requirement would also enable FDA, through a request made pursuant to section 905(i)(1)(B) of the FD&C Act, to determine whether such advertising, and in turn, the product on the market, is in compliance with the requirements of the FD&C Act and its implementing regulations (for example, to ensure that such advertising does not indicate that a product is a modified risk tobacco product without an FDA order in effect, or contain a claim that is false or misleading). Moreover, a historical file is a critical tool for FDA to assess compliance during inspections. For example, during such inspections, FDA could review a firm's historical file to ensure that it accurately and correctly listed their tobacco products as required under proposed part 1108. In addition, FDA may review a registrant's historical file to ensure that it appropriately included required warnings on all labeling and advertising for such [Text truncated at 120,000 characters. The full text is on the page linked above.] --- Source: Frix Law Library, https://www.frixlaw.com/law-library/documents/fr%3A2026-13047. Public record. Not legal advice.